Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Volume 59 ▲
Num
ber 4
DE
TR
OIT
SEC
TIO
N - SO
CIE
TY
OF P
LAST
ICS E
NG
INE
ER
S - “TH
E C
HA
RT
ER
CH
AP
TE
R”
January 2015
www.schoolcraft.edu
www.SPEdetroit.org2
President’s MessageDr. Sassan Tarahomi, IAC Group
President
December 2014 President Message
Dr. Sassan Tarahomi, IAC Group Growth – My dear fellow SPE members,
about two months ago in early October I
discovered the SPE is offering a limited time one
year free student membership to any student
interested to sign-up for SPE as a member. This is
normally a $33 annual fee which in my opinion is
still a large sum of money for students who are
struggling to pay tuition, books and fees, and are
burdened with thousands of dollars of student loan
debt. This was a great decision by SPE
International to offer this opportunity to students.
The Detroit Section Chapter Advisers were able to
take advantage of this opportunity and sign-up
many students at Kettering University, Michigan
State University, Ferris State University and
Schoolcraft College.
Table-1 SPE Student membership status since
June 2014 for universities in Detroit area
Table-1 data was prepared by Sandra McClelland
our hardworking Councilor and was presented at
our November 24 board meeting. It is very exciting
and interesting to see the large growth of SPE
membership at the Detroit Section sponsored
universities in a short few months. However, it is
also very disappointing to see the lack of SPE
membership growth at other local universities.
This data indicates two important facts. First,
sponsored chapters are working well with their
corresponding universities to recruit new students
and offering free student membership, which
tremendously helps with their recruitment mission.
My congratulations to the SPE student chapters at
the Ferris State University, Kettering University,
Michigan State University, and Schoolcraft
College for their hard work in recruiting students.
Each student chapter continually spreads the SPE
vision and implements the SPE mission among
their fellow student membership. Second,
Universities without SPE chapters are in the
opposite situation. They are barely holding to the
one or two SPE student members. It should be
our goal to change this result. I will designate a
major portion of my next Detroit Section board
meeting on Monday, February 2, 2015 to discuss
the SPE student membership at these highly
Growth – My dear fellow SPE members, about two months ago in early October I discovered the SPE is offering a limited time one year free student membership to any student interested to sign-up for SPE as a member. This is normally a $33 annual fee which in my opinion is still a large sum of money for students who are struggling to pay tuition, books and fees, and are burdened with thousands of dollars of student loan debt. This was a great decision by SPE International to offer this opportunity to students. The Detroit Section Chapter Advisers were able to take advantage of this opportunity
and sign-up many students at Kettering University, Michigan State University, Ferris State University and Schoolcraft College.Table-1 SPE Student membership status since June 2014 for universities in Detroit area Table-1 data was prepared by Sandra McClelland our hardworking Councilor and was presented at our November 24 board meeting. It is very exciting and interesting to see the large growth of SPE membership at the Detroit Section sponsored universities in a short few months. However, it is also very disappointing to see the lack of SPE membership growth at other local universities.
This data indicates two important facts. First, sponsored chapters are working well with their corresponding universities to recruit new students and offering free student membership, which tremendously helps with their recruitment mission. My congratulations to the SPE
www.SPEdetroit.org 3
student chapters at the Ferris State University, Kettering University, Michigan State University, and Schoolcraft College for their hard work in recruiting students. Each student chapter continually spreads the SPE vision and implements the SPE mission among their fellow student membership. Second, Universities without SPE chapters are in the opposite situation. They are barely holding to the one or two SPE student members. It should be our goal to change this result. I will designate a major portion of my next Detroit Section board meeting on Monday, February 2, 2015 to discuss the SPE student membership at these highly regarded universities and hopefully address how we can change these results. I invite any interested member who can assist us with this task, to attend this meeting at the American Chemistry Council office in Troy. Meeting will start at 5:00 PM and ends at 8:30 PM.
Christmas holidays are almost here! Pretty soon, I’ll be smelling the baked pies while enjoying the Christmas music from my hand me down I-Pod hocked up to a large speaker on the corner of our kitchen. But this year, my wife and I are leaving
to Florida during Christmas holidays and will be enjoying the sun and warm weather. I have to wait until next year for making more Christmas memories at home. I know I’ll miss it a lot but change is good for all of us especially those that keeps the wife happy.
I wish all of you a great time with your family and friends and a very happy holidays. Rest and recuperate and be ready for a lot more fun at your day job and SPE volunteer work at night. We have lots of great activities planned for 2015 and need your help to make them happen.
“Merry Christmas, Happy Holidays, and Happy New Year to all”.
Let’s have more fun!
Yours truly,
Sassan TarahomiPresident, SPE Detroit Section
www.SPEdetroit.org4
Serving All Your PlASticS needS Since 1985
A Global Company with a Market Focus
1900 Summit Tower Blvd, Ste 900 ~ Orl ando, FL 32810407 .875 .9595 ~ www.entecresins .com
Would you like the Plastivan to visit the school in your area?
Please contact Tom Miller at [email protected].
Schedules for this school year visits are being made now.
AccessAbility
800-23-CHASE | ChasePlastics.com
From application development through material selection, our experts are here to work with you, helping you bring
products to market faster and improving your bottom line.
That’s AccessAbility from Chase Plastics.
JIM ALEXANDER
31211 Stephenson Hwy., Ste 100Madison Heights, MI [email protected]
p: 248 733 9669f: 248 307 1777
April 10, 2015 Material Auction
MGM Grand Detroit
May 5, 2015 AutoEPCON
Troy Marriott
www.SPEdetroit.org 5
Nylon 6 and 66
Engineered TPE’s
Post-Consumer and Post-Industrial Recycled Nylon and PP Compounds
Performance Polypropylene Compounds
Ravago ManufactuRing
aMeRicasglobal Reach – local solutions
1 9 0 0 S um m i t T o w er Blv d . S t e 9 0 0 Or l a n d o , F L 3 2 8 1 0 ~ 9 3 1 . 7 2 8 . 7 0 0 9 ~ w w w. r ava g o m f g . c o m
Featuring
Enviramid®Echo®Hylon®Enflex®EZprene®Ensoft®
Featuring
Enviramid®Echo®Hylon®Enflex®EZprene®Ensoft®
RavagoHlf13_3 1 3/4/13 11:33 AM
Cockpit• Door/lock/window• Seatingandrestraint• Instrumentpanels• Speakergrilles,knobs,handles,bezels–lowgloss,metalliceffects,lasermarkable
Fuel Systems• Filters• Pumps/valves• Caps/fillernecks• Bodyclips• Fuelcells
Lighting/EE• Connectors• Sensors• Lightinghousings• Lampsockets• Lampwedgebase• Powerdistribution
Under Hood/ Powertrain• Fuelrails• Coolingsystems• Enginecovers• Airpumps• Connectors
Structural• Frontendmodules• Doormodules• Radiatorgrilleframes• Underbodyskidplates
• Wiperplenumsandbows• Multi-functionalroof• Mirrorhousings
CELANESE ENGINEERED MATERIALS
We Can Drive Performance Where You Need It To Go.
Copyright©2013Celaneseoritsaffiliates.Allrightsreserved.
celanese.com/engineered-materials 1.800.833.4882 [email protected]
Celanex®PBTCelstran®/Compel®/Factor®LFRT
Celstran®CFR-TPFortron®PPS
GUR®UHMW-PEHostaform®/Celcon®POM
Impet®PETRiteflex®TPC-ET
Thermx®PCTVandar®PBTAlloy
Vectra®/Zenite®LCP
www.SPEdetroit.org6
SPE is Booming at Kettering University December, 2014
Under the direction of Mark Richardson, Industrial and Manufacturing Engineering (IME) Lecturer, and with the help of Eve Vitale, Kettering University’s Student Section of SPE is gaining popularity and momentum. The new members include mechanical, industrial, chemical and electrical engineering students.
It all started while Richardson was working as a graduate assistant in the Industrial & Manufacturing Engineering Department three years ago, running the introductory manufacturing processes labs, which included injection molding and thermoforming. He noticed a lab-scale single screw extruder which was similar to one that had been part of the sheet extrusion lab when he worked for The Dow Chemical Company, tucked in the back corner of the Polymer Processing Laboratory.
He walked into the Department Head’s office and said I’m going to get the extruder in the lab up and running. He was met with Dr. Scheller’s reply of: “Yeah. Sure, and what was your name again?” Fast forward to 2014 and the change is remarkable, not only in the lab, but with industry and student engagement.
It started with a trip by Richardson and Vitale to NPE in 2012 and a meeting with Bill Carteaux, facilitated by Kettering alumnus, Dan Joseph, CEO of D. R. Joseph, Inc. This meeting gave Richardson and Vitale the confirmation they needed to move forward with a plan of making a difference to an industry hurting for workforce. They were invited to make a presentation to the SPI Equipment and Processors Councils in Indianapolis, and took part in a Washington SPI Fly-In.
These events led to a number of support opportunities, the first being a water bath and pelletizer consigned from Bay Plastics Machinery and a Cold Jet Dry Ice machine. Through a purchase and donation, Rebuilding & Fabricating, Inc, provided downstream sheet, cast film and profile extrusion equipment for the extruder. Una-Dyn donated a large capacity dryer, Asahi Kasei and Chevron Phillips donated raw materials. IAC donated colorants and PMC (Premier Material Concepts) donated sheet. Two more pieces of equipment are on their way—a thermoformer from Ford and a 35mm twin screw bought from Century Extrusion at a considerable discount.
Looking for opportunities with philanthropic organizations, Vitale wrote a number of grants. The GM Foundation supported two new classes in Plastics Processing which have been delivered in seminar form for the last year. The Dart Foundation granted money to match a MAAC Machinery and SPE Thermoforming Division grant which led to the purchase of a new MAAC Thermoformer, replacing the model that was thought to be approximately 50+ years old. The new thermoformer has supported both graduate and undergraduate independent studies. The Grainger Foundation gave $5,000 to support the lab, and the Dart Foundation granted $25,000 more to refurbish, calibrate and maintain the testing equipment necessary for Richardson’s applied research.
With the help of the IME technicians, Richardson removed over 23 tons of decades-old equipment and began his onslaught on industry to upgrade and improve the lab to benefit students and to make progress in plastics workforce development.
www.SPEdetroit.org 7
Asahi Kasei (AK) has donated considerable material development work to support Richardson’s research and John Moyer, President at Asahi Kasei Plastics North America and Kettering University Trustee, has been especially helpful and supportive of the efforts to increase student awareness of the industry. Kettering’s SPE Section has an open invitation to tour AK’s Fowlerville plant and network with many of the top executives, researchers and support staff, which they did again this term.
Other activities in the fall of 2014 included:• WeeklymeetingsinthePolymerProcessing
Lab with 30 usually in attendance• Nineteen in attendance at the SPE
Innovation Gala• Club Expo for freshmen and transfer
students to promote SPE• Russell Broome, SPE Managing Director
andSueWojnicki,SPEManagerofEventsand Membership visited to talk to students
• TouratACIPlastics,Inc.inFlint• Support for the SWE Outreach event
for middle-school girls in the Polymer Processing Lab
• PresentationonCarbonFiberCompositesbyPresidentPaulWoodsonandTreasurerJoel George
• OutreachatDiscoverKettering–over100prospective students and their parents came through the lab and were given hands-on activities with the extruder, pelletizer,injectionmoldingmachineandthermoformer
• Waterbottlerecyclinginthelab• MoldingKetteringBulldogs,workingwith
the extruder and pelletizing strand; and• Aholidayparty
StudentswerealsoinvolvedinANTECin2014and more are planning on making the trip to Orlando in 2015, being especially interested in the Plastics Race and planning for the “next
generation” of plastics professionals. Two studentsareevenparticipatingatDetroitSPEBoardmeetings,lookingforwaystocontribute.
Issues can arise because Kettering is a co-op university which has its students switching back and forth between academic terms and work terms every 11 weeks. This creates a group with two distinct memberships and tones, generating challenges to get desired projectsaccomplished in just 10weeks (nothing getsfinished during finals week), or to get the sectionstocooperate.Butthey’reworkingonit,andthenewBulldogmoldisafineexample.
A-Section, under the leadership of ChrisLafayette, wrote a grant to Kettering Student Government for a new mold and received $4,999 in funding, while Julia Hershey in B-SectiondevelopedtheCADforthisnewBulldogmold.The mold, manufactured by Linear Mold & Engineering, allows for continuous molding of Kettering’s mascot relieving Richardson and his students of standing for hours in front of the presstomoldthedesirednumberofBulldog’sfor the Kettering community.
Richardson’s personal involvement as faculty advisor has many facets which he insists are all important in attracting students to the industry. First and foremost is to give them meaningful and relevant hands-on experiences in the Polymer Processing Lab. He also works hard to expose them to the many opportunities to network with industry professionals afforded by SPE membership. Through his own service to the University, he encourages students to reach out to pre-college students at many Kettering-sponsored events. He believes these students could be budding plastics engineers. Butmostimportantly,hepersonallyshareshisenthusiasm for plastics with his students, giving unselfishly of his time and energy in hopes that our industry will reap the benefits.
www.SPEdetroit.org8
FromFromFrom scrap . . . tototo compound.
Quality Solutions for Thermoplastic Compounds and Recycling
3802 James Savage Road Midland, MI 48642
Phone: 989-495-9367
www.midlandcompounding.com
Toll Compounding
Product Development
Materials Testing
Consulting
We provide comprehensive recycling services that include Grinding / Shredding, Melt Filtering and Pelletizing of post-industrial scrap.
We Process: Acetal Acrylic ABS Nylons PC
PC/ABS PE PP TPE / TPO TPU
• Integrity • Honesty • Loyalty • Trust • Work Ethic • Character • Passion • Respect
Your trusted partner in thermoplasticresin distribution and technical guidance.
resin distribution with expertise
M. Holland
www.SPEdetroit.org 9
ecology loves economyCar parts made with BASF plastics can be used instead of metalparts to make vehicles lighter and therefore more fuel-effi cient. Thismeans lower emissions, less fuel consumption and less money out ofpeople’s pockets. When preserving the enviornment agrees with notupsetting your fi nances, it’s because at BASF, we create chemistry.www.plasticsportal.com or 800-527-8324
2010_BASF_SPE-Detroit_Ad.indd 1 10/13/2010 3:09:33 PM
Jefferson 8th grade students were excited to see the Plastivan presentation by Marjorie Weiner (sponsored by The Society of Plastics Engineers) on November 6 & 7. Students engaged
in hands-on activities increase their knowledge of the current use of plastics and careers available in plastics engineering.
The Plastivan was a big hitNovember 6 & 7, 2014
www.SPEdetroit.org10
Designed especially for individuals working in the plastics industry who want to increase their understanding of plastic materials and applications, this course provides an understanding of plastic materials, tooling, processing and testing, with an emphasis on injection molding. Participants will learn about different types of plastic materials and how material choice relates to part performance. Participants will apply knowledge gained to improve day-to-day work and be able to communicate effectively with various disciplines within the industry.
Section Name and Title Meeting Information Instructors Fee CEUs Status
CESB-6257Intro to Plastic Materials and Processing
1/14/15 – 4/1/15 Wednesdays, 6:00 – 9:00 pm
Jeffress Center, RM 102(except 3/11/15 class, RM 110)
Peter Grelle $995 3.6 Open until filled
For more information, contact Tammy Thomson, 734.462.4349,
presents
DevelopmentBusinessCENTER
The Schoolcraft College
Register online at https://webadvisor.schoolcraft.edu
i n t r o d u c t i o n t o PLASTIC MATERIALS AND PROCESSING
[email protected] or visit www.schoolcraft.edu/plastics
www.SPEdetroit.org 11
Peter F. Grelle has been employed in the plastics in-dustry for nearly forty (40) years and has been a mem-ber of the Society of Plastics Engineers since 1972. He is currently owner/president of Plastics Fundamen-tals Group LLC, a company specializing in training and consulting. He was employed nearly twenty (20) years with The Dow Chemical Company, and prior to Dow was employed by the Monsanto Company, the Winchester Group of Olin Corporation, and Wellman Inc. Plastics Division. Peter received his B.S. in Plastics Technology from Lowell Technological Institute, and his M.S. in Plastics Engineering from the University of Massachu-setts at Lowell. He holds four (4) US and international patents in plastics product design, and has authored and co-authored forty (40) publications in the areas of plastics part design, plastics materials, structural foam molding, recycling, and plastics process technology.
Peter is the recipient of the 2000 Engineer of the Year Award from the Injection Molding Division of the SPE, the 2001 SPI Structural Plastics Division Industry Recognition Award, and the 2006 SPE Honored Ser-vice Award. He has also received four (4) Best Paper Awards from the Society of the Plastics Industry (SPI) Structural Plastics Division, the Society of Plastics En-gineers (SPE) Injection Molding Division, and the So-ciety of Automotive Engineers (SAE).
Since 2009, Peter has been a member of the SPE De-troit Section Board of Directors and was Detroit Sec-tion President from 2013-2014. Since 1991, he has been a member of the SPE Injection Molding Division Board of Directors and was Injection Molding Division Chairperson from 1997-1998, and currently serves as the Injection Molding Division Technical Director. Pe-ter was also a member of the SPE Rochester, New York Section Board of Directors from 1993 to 1996.
introduction to PLASTIC MATERIALS AND PROCESSING
Upon completion of the course students will be able to:1. Identify characteristics of different types of plastic materials that make it appropriate for the application.2. Discriminate between the advantages and limitations of common plastic molding processes.3. Relate application test requirements to material and process choice.4. Demonstrate the ability to identify various features of a plastic part.5. Understand how various material choices and processing techniques can affect the molded part.6. Illustrate various material, design and process options affecting part mass, cost and performance.7. Apply background concepts and knowledge of materials to tool design.8. Apply background concepts and knowledge of processability to part design.9. Apply plastic part design knowledge into tooling.10. Apply engineering fundamentals to plastics part design.
www.SPEdetroit.org12
• Prime and Generic Material• Compounding• Reprocessing• Brokering
ABS • Acetal • Acrylic • Nylon 6 Nylon 6/6 • Polycarbonate • PBT • PC/ABSPurge • Custom made Compounds
Of�ce 248-486-1449Fax 248-486-7966Toll Free 888-ENG-PLAS
www.uniplasinc.com
www.SPEdetroit.org 13
CouncilorsNominations are being accepted for the Councilor Elections thru January 31, 2015
Elections will be held in February, 2014
The term for the Councilor is 2015-2018
Sandra McClleland, the current Councilor is eligible for re-election and has expressed interest in serving the next term and therefore will be a nominee for the elections.
Nominees should have a successful track record with the Detroit Section for at-least 10 years.
For more information and requirements please contact Nippani Rao, the nominations/elections chair at [email protected] or call 248 444 1753
Board MembersNominations are also being accepted for Detroit Section Board Members Elections thru January 31, 2015.
Current board members, whose term is expiring, 2015 are all eligible to run again.
The elections will be held in February, 2015.
The election term is for 2015-2018.
We welcome any one currently working with the board in any capacity and is interested in running for the elections, please apply with a bio and a photograph.
Bios and photographs must be sent to Nominations/elections chair, Nippani Rao at [email protected]
Attention Students and FacultyThe SPE EPCON Committee is looking for students to serve as moderators and presenters at the 2015 EPCON scheduled for May 5th at the Troy Marriott. Contact Tom Miller at [email protected] if you would like to take advantage of this opportunity to network with industry experts and showcase your presentation skills.
www.SPEdetroit.org14
Sponsor Adver,sing Guidelines
We need sponsors for the Trends & Topics Newsle8er! To reach our members SPE Detroit Sec,on distributes an electronic Newsle8er 6 ,mes a year. All ads are full color and copies of the newsle8er are posted on the Detroit Sec,on website. A limited number of copies will only be printed to promote the sec,on at various shows. Acceptable file formats for adver,sing include: • Portable Document Files (PDF) preferred:
Smallest file size, or images a 96 – 100 DPI. Fonts must be imbedded. • Photoshop *.,f Files:
96 – 100 DPI resolu,on, RGB color model. • JPG Files:
Low to medium resolu,on, RGB color model. • Adobe InDesign CS 5 Files:
Files can be converted in-‐house to web content. If any other formats are to be submi8ed, please contact Jim at Maple Press, 248.733.9669, fax 248.307.1777, or orders@maplepressprin,ng.com. In addi,on to the ad, Sponsors of PC level and greater, will have the opportunity to publish a press release once per year. Note: Artwork approved for your first newsle8er, is the artwork that will be used for the en,re year.
Please contact , Chris Surbrook at 989-‐495-‐9367, or 989-‐205-‐6960 Email: [email protected], or Bob Petrach at: [email protected], for space reserva,ons.
Sizes Available
rPE Level $500
1/16th Page Color Ad 1-‐15/16” x 2-‐3/8”
(49.2125 mm x 60.3245mm)
ABS Level $750
1/8th Page Color Ad 1-‐15/16” x 4-‐3/4”
(49.2125 mm x 120.6499mm)
PC Level $1000
1/4th Page Color Ad 3-‐7/8” x 4-‐3/4”
(98.4249 mm x 120.6499mm)
PPS Level $1500
1/2 Page Color Ad 7-‐3/4” x 4-‐3/4”
(196.8499 mm x 120.6499mm)
PEEK Level $2500
Full Page Color Ad
7-‐3/4” x 10-‐1/4” (196.8499 mm x 260.3499mm)
Adver,sing rates are based on a 6 ,me run star,ng in September. Please email or call for informa,on on other Sponsorship opportuni,es or less than full year rates aeer October 1st.
Email: [email protected], or Bob Petrach at:[email protected], for space reservations.
Membership Note
Even though you are a member of SPE International, you are not a member of the Detroit Section unless you have selected
Michigan-Detroit as one of your technical groups. Members of SPE are entitled to select two Sections and/or Divisions at no charge, and to add additional groups for only $10/year. There are many
benefits in having Michigan-Detroit as one of your groups.
Newsletter SponsorsBASF Automotive • Celanese • Chase Plastics
Entec Polymers • IAC Group
M. Holland Company • Maple Press • Midland Compounding
Ravago Americas • Scientific Molding • Uniplas
Vantage Plastics • Waste Free
www.SPEdetroit.org 15
Please Respond!Most e-Communications request a response. True, some emails are for information only, but many ask you to reply. We want to have our e-Communications used as a “two-way street.” Here are a few examples where your response is really needed.
Election BallotIn February, an election will be held to select the Councilor and Directors for three-year terms. An instruction sheet and link to the ballot will be eblasted to each member of the Detroit Section. Please be sure to open the email and click on the link to the ballot. Then vote your choices and reply to the brief survey at the bottom of the ballot.
News BriefOur News Briefs are eblasted to Detroit Section members about once each month to announce our Trends & Topics newsletter on the web and to provide information on upcoming meetings as well as links to our sponsors’ websites. Each issue requests a reply with questions, comments, and suggestions regarding communications. Please take the opportunity to do this.
Social MediaA major place for two-way communication is through our Detroit Section social media sites. Please be sure you are signed up as a friend to follow our Detroit SPEaker on LinkedIn, Facebook, and Twitter. Several postings are made by Detroit SPEaker each month. (At last count, there were 120 posts on the Detroit Section Linked in site.) Please click “like” and comment on the postings to be sure they remain active and are kept on top of the discussion chain.
The SPE ChainAlthough The Chain is currently available only to Detroit Section Board members and other select SPE members for Beta-testing, it will soon be available to all SPE members through the SPE International website. It is a great two-way communication tool that was described in the e-Communications article last November. Be sure to sign up and use it.
RSVPPlease respond to let us know that you read this article. You can easily respond by clicking the following link to send an email to [email protected].
Current SPE Sites to VisitBe sure to bookmark as favorites and/or have logos and apps to easily visit our many sites on the web. Here are links to a few of them.
• SPEInternationalwww.4spe.org• DetroitSection www.spedetroit.org• LinkedInwww.linkedin.com/groups?home=&gid=4404194• Twitterwww.twitter.com/detroitspeaker• Facebookwww.facebook.com/detroit.speaker
e-Communications Irv Poston – General Motors (retired)
www.SPEdetroit.org16
Click on www.SPEdetroit.org on any page to go to our website.
Click on hyperlinks and Sponsors’ Advertisements to go to websites for more information.
Click on the Bookmark icon in the left-side Navigation Panel to go to specific places in the Newsletter.
Detroit Sectionsociety of plastics engineers, inc.1800 Crooks RoadTroy, MI 48084
DETROIT SECTION EXECUTIVE BOARD and COMMITTEE MEMBERS FOR 2014-2015Title Name Company O/W Phone Cell Phone EmailPresident Sassan Tarahomi IAC 248-455-3981 248-259-5624 [email protected] Elect Adrian Merrington Michigan Molecular Institute 989-832-5555 ext 638 [email protected] Vice President Wayne Hertlein Wilbert Plastic Services 248-953-7826 [email protected] Second Vice President Gary Kogowski Entec Polymers/Ravago Americas 248-797-7433 [email protected] President Pete Grelle Plastics Fundamentals Group LLC 248-752-2611 [email protected] Tom Powers Consultant 248-877-0689 [email protected] Sandra McClelland Chevron Phillips Chemical 586-264-0063 586-292-1794 [email protected] Bob Petrach Safety Technology International, Inc. 248-703-5995 [email protected] Emeritus Irv Poston Retired (GM) 248-646-9574 [email protected]
Nippani Rao Rao Associates 248-444-1753 [email protected] Powers Consultant 248-877-0689 [email protected] Kakarala Inteva Products Retired 248-433-1227 [email protected] Price Global Polymer Solutions 248-738-5504 248.563.6343 [email protected]
COMMITTEE CHAIRS FOR 2014-2015Advertising Co-Chair Bob Petrach Safety Technology International, Inc. 248-618-6809 248-703-5995 [email protected]
Co-Chair Chris Surbrook Midland Compounding, Inc 989-495-9367 [email protected] Conference Co-Chair Gary J. Kogowski Entec Polymers/Ravago Americas 248-797-7433 [email protected]
Co-Chair Sandra McClelland Chevron Phillips Chemical 586-264-0063 586-292-1794 [email protected] Co-Chair Nippani Rao Rao Associates 248-444-1753 [email protected]
Co-Chair Pete Grelle Plastics Fundamentals Group LLC 248-752-2611 [email protected] / Web Content Co-Chair Irv Poston Retired (GM) 248-646-9574 [email protected]
Co-Chair Marc Bahm MRB Polymers 248-496-2811 [email protected] Adrian Merrington Michigan Molecular Institute 989-832-5555 ext 638 [email protected]
SPE Foundation/Education Fund Co-Chair Tom Powers Consultant 248-877-0689 [email protected] Sandra McClelland Chevron Phillips Chemical 586-264-0063 586-292-1794 [email protected]
House Co-Chair Sassan Tarahomi IAC 248-455-3981 248-259-5624 [email protected] Bob Petrach Safety Technology International, Inc. 248-703-5995 [email protected]
Intersociety Co-Chair Wayne Hertlein Wilbert Plastic Services 248-953-7826 [email protected] Co-Chair Russ Peters S C Johnson & Son, Inc 989-667-1008 [email protected]
Material Auction Co-Chair Dawn Cooper Uniplas, Inc. 248-486-1449 [email protected] Chris Surbrook Midland Compounding, Inc 989-495-9367 [email protected]
Membership Co-Chair Gary Lawrence Techno Polymer 734-788-2394 [email protected] Bob Bogdewiecz Wellmann Engineering Resins 248-921-4951 [email protected]
Newsletter Editor Co-Chair Gary J. Kogowski Entec Polymers/Ravago Americas 248-797-7433 [email protected]/ Elections Co-Chair Irv Poston Retired (GM) 248-646-9574 [email protected]
Co-Chair Nippani Rao Rao Associates 248-444-1753 [email protected] & Essay Contest S.E. Mich. Tom Miller BASF 586-291-5289 [email protected]
Northern Mi. Todd Hogan Dow Chemical Co. 989-636-5303 [email protected] Interest Co-Chair Dawn Cooper Uniplas, Inc. 248-486-1449 [email protected]
Co-Chair Patricia Ewald DME 248-544-5787 [email protected] Co-Chair Tom Miller BASF 586-291-5289 [email protected]
Co-Chair Adrian Merrington Michigan Molecular Institute 989-832-5555 ext 638 [email protected] Sandra McClelland Chevron Phillips Chemical 586-264-0063 586-292-1794 [email protected] Programs TPO Pete Grelle Plastics Fundamentals Group LLC 248-752-2611 [email protected]
TPO Norm Kakarala Inteva Products Retired 248-433-1227 [email protected] Sandra McClelland Chevron Phillips Chemical 586-264-0063 586-292-1794 [email protected]
TPO Conference Chair Bill Windscheif AIS, Ltd. 248-375-2335 [email protected] Co-Chair Marc Bahm BASF 248-496-2811 [email protected]
Co-Chair Adrian Merrington Michigan Molecular Institute 989-832-5555 ext 638 [email protected] Co-Chair Tom Powers Consultant 248-877-0689 [email protected]
Co-Chair Wayne Hertlein Wilbert Plastic Services 248-953-7826 [email protected] Generation Advisor Co-Chair Furkan Akdemir Elastron USA, Inc. 248-946-2214 [email protected]
Co-Chair Maheen Khan [email protected] Outing Co-Chair Nippani Rao Rao Associates 248-444-1753 [email protected]
Bo
ard
of
Dir
ecto
rs
Term Ending 6/2015 Term Ending 6/2016 Term Ending 6/2017 AdminstrativeAdrian Merrington
[email protected] Chris Surbrook [email protected] Keinath
[email protected] Pickett
[email protected] Kogowski
Dawn [email protected]
Robert V. Petrach, [email protected]
Laura [email protected]
Bill [email protected]
Marc [email protected]
Terry [email protected]
Todd [email protected]
Wayne [email protected]
Karen Rhodes-Parker248-244-8993
[email protected] SPE Detroit website
www.SPEdetroit.orgTPO Conference
www.auto-TPO.comSPE International www.4spe.org