Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Vol.2, No. , November
Standards Action plan
INTRODUCTION
The Afghan National Standards Authority (ANSA) is the national standards organization of
the Islamic Republic of Afghanistan.
The technical standards work of ANSA is carried out by technical committees convened
under technical departments. The outcome of these technical committees gathering and
approving technical standards are often in print in Afghanistan national standards Magazine.
The standardization action plan comprehends the list of all anticipated standers that are
being in progress and presumed to be published when clinched twice in a year.
ANSA policy covers adoption of national, regional and international standards when
founded useful and appropriate to Afghanistan contingent status quo. A complete list of
approved standards are found in ANSA’s Magazine “National Standards Catalogue” issued
quarterly comprising a new issued standers supplementing standards database.
During standard recognition process, the document should move through several stages in
order to be recognized or be approved standard at National level. The procedure for
standard recognition is developed in a way to ensure its recognition and make it tolerable to
all interested parties.
Afghan National Standards Authority (ANSA) Head Office: Add: Industrial Park Area Kabul-Jalalabad Road P.O. Box 5172, Kabul/Afghanistan Tel.: (+93) 202320119, E‐Mail: [email protected] , Web: http://www.ansa.gov.a
C O N T E N T S
Page NO
INTRODUCTION .......................................................................................................................................
C O N T E N T S .........................................................................................................................................
HOW TO USE THIS PUBLICATION ............................................................................................................
Standards projects ..............................................................................................................................
Stage .......................................................................................................................................................
Stages of Afghan Standards development: .............................................................................................
ANSA Technical Committees List ............................................................................................................
TC-2 Quality Management systems Deportment ...................................................................................
TC- Food and Agricultural Products’ Technical committee ..................................................................
TC-4 Pharmaceutical and cosmetics Technical committee.....................................................................
TC-5 Construction Technical committee .................................................................................................
TC-6 Petroleum Products ........................................................................................................................
TC-8 Electro- technical Committee ........................................................................................................
TC- 9 Textile and leather ......................................................................................................................
TC-14 Environmental ............................................................................................................................
TC- 17 Chemical & Plastic standards ....................................................................................................
DRAFT AFGHAN STANDARDS BY SECTOR..............................................................................................
Published by: Afghan National Standards Authority (ANSA) WTO‐TBT National Enquiry Point Tel.: (+93) 752086743 E‐Mail: [email protected]
HOW TO USE THIS PUBLICATION
Standards projects
Technical committees are the decision-making boards in order to establish standards at
National level. The sequential order of the committees has been provided below which starts
from C-2 to C-12. The subsequent list wills categories different standards in numerical order.
Stage
To allow systematic monitoring of standards establishment the subsequent important steps
shall be involved and be taken into consideration.
Stages of Afghan Standards development:
Proposal Stage
Items to be proposed for, to be a new standard
Preparatory Stage
Preliminary draft preparation
Committee Stage
Draft sharing with Technical committees and initiating technical work.
Enquiry Stage
Technical committee work/ final draft is handed to ANSA’s Standards Supreme Council (SSC)
affair department to submit for SSC’s reviews and comments.
Approval Stage
During this stage the final draft of Afghan standard is circulated to all members of Standard
Supreme Council after observation in case of no comments the result is known as national
standards.
Publication Stage
The standard goes for publication when receives ANSA Supreme council approval.
ANSA Technical Committees List
Number Technical Committee Name TC NO
Quality Management System Standards Committee TC2
Food & Agriculture Products Standards Committee TC3
Pharmaceutical & Cosmetics Standards Committee TC4
Construction Materials Standards Committee TC5
Petroleum Products Standards Committee TC6
Electricity Standards Committee TC8
Textile Standards Committee TC9
Metrology Standards Committee TC10
Environmental Standards Committee TC14
Mine Clearance Standards Committee TC16
Plastic & Chemical Standards Committee TC17
Building Codes Committees TC11
TC- Quality Management systems Deportment
NO Name of Standards Stage References
Medical laboratories – Requirements for quality and competence
Approval ISO :
Medical laboratories – Reduction of error through risk management and continual improvement
Approval ISO/TS :
Codes for the representation of name of countries and their subdivisions, Part 1: Country Codes
Committee ISO - :
Codes for the representation of name of countries and their subdivisions, Part 2: Country subdivision code
Committee ISO - :
Codes for the representation of name of countries and their subdivisions, Part 3: Code for formerly used names of countries
Committee ISO - :
Energy Management Systems – Requirements with guidance for use
Committee ISO :
Point Of Care Testing (POCT) – Requirements for quality and competence
Committee ISO :
Food safety management systems – Requirements for any organization in the food chain
Committee ISO :
Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
Committee ISO :
Food safety management systems – Guidance on the application of ISO 22000:2005
Committee ISO :
Occupational health and safety management systems – Requirements
Committee OHSAS :
Occupational health and safety management systems – Guidelines for the implementation of OHSAS 18001:2007
Proposal OHSAS :
TC- Food and Agricultural Products’ Technical committee
Reference stage Standard
ISIRI :
approval Walnut in shell
ISIRI approval Walnut kernel
:
Codex – -
Committee Olive oils and Olive Pomace
Codex – -
Committee Rice
INSO : Ist.Revision
Committee Dry fruits – Determination of moisture content-test methods
ISRI – :
Committee Standard for water Melon
ISRI – :
Preparatory Biscuit
ISRI – :
Preparatory Dried Mulberry
CODEX – STAN 260-
Preparatory Codex Standard for Pickled Fruits and Vegetable
ISRI – :
Proposal Dried fig – Specification and test method
TC- Construction Technical committee
Abrasion resistance of dimension stone subjected to foot traffic
Approved C241/C241m-
Absorption and bulk specific gravity of dimension stone Approved C97/C97 -
Standard Specification for hot-mixed, hot-laid Bituminous paving Mixtures
Approval ASTM D3515
Standard Specification for structural steel shapes Approval
A992/A992M-11 Reapproved 2015
Standard Specification for Steel Sheet Pilling Approval A328/A 328M-
Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete1
Approval C869
TC-4 Pharmaceutical and cosmetics Technical committee
No Standards Stage Reference
Intravascular catheters - Sterile and – single use catheters : Part 4 Balloon dilatation catheters
Approved ISO 10555-
Intravascular catheters - Sterile and – single use catheters : over- needle peripheral catheters – part :5
Approved ISO 10555-
Intravascular catheters - Sterile and – single use catheters : part 6: subcutaneous implanted ports
Approved ISO 10555-
Intravascular catheters – Sterile and single – use catheters- part3: Central venous catheters
Approved ISO 10555-
Non – invasive sphygmomanometers- part 1: requirements and test methods for non –automated measurement type
Enquiry ISO 81060-
Licourice in powder and mould form specifications and test methods
Enquiry ISIRI 2343
Liquorice extracts Determination of glycyrrhizic acid content Method using high performance liquid chromatography –test method
Enquiry ISIRI 6699
Specification for Magnesium Stearate for Cosmetic industry
Enquiry ISIRI 1324
Non-invasive sphygmomanometers — Part 2: Clinical investigation of automated measurement type
committee ISO 81060-
Standard Specification for Expanded polystyrene (EPS) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems(EIFS)
Approval E2430/E2430M-
Standard specification for light weight aggregates for insulating concrete
committee C332-
Significance of tests and properties of concrete and concrete-making materials STP 169D
committee STP 169D
Standard specification for resilient connectors between reinforced concrete manhole structures, pipes, and laterals(Metric)
proposal C 923
Standard specification for manufacture of precast reinforced concrete three-sided structures for culverts and storm drains l
proposal C 1797
Standard specification for ground calcium carbonate aggregate mineral fillers for use in hydraulic cement concrete 1
proposal F 2589
TC- Petroleum Products
standard stage Reference
Standard Specification for Performance of Manual Transmission Gear Lubricants
Approval
ASTMD 5760
Minimum requirements for the content of the user manual for automotive LPG
Approved ISIRI 12020
standard for Equipment of motor vehicle using liquefied
petroleum gas) LPG): Flexible hoses with coupling
Approval ISIRI- -
standard for Equipment of motor vehicle using liquefied
petroleum gas) LPG): Fuel rail
Approval ISIRI- -
Crude petroleum. General Specification
Approved GOST 51858-
Standard Specification for Mineral Insulating Oil use in Electrical Apparatus
Approval ASTMD 3487
Standard Specification for Performance of Active API Service Category Engine Oils
Approval ASTMD 4484
Condesate Gas Stable Specification
Approval GOST 54389
TC-8 Electro- technical Committee
standard stage Reference
Solar heating - Domestic water heating Systems - Part 2: Outdoor test methods for System Performance characterization and yearly Performance prediction of solar--only Systems
Approved ISO -
Solar heating - Domestic water heating Systems - Part 4: System performance characterization by means of component tests and computer simulation
Approved ISO -
Solar heating - Domestic water heating Systems - Part 5: System performance characterization by means of whole-system tests and computer simulation
Approved ISO -
Solar energy — Solar thermal collectors — Test methods
Approved ISO 9806
Hydrometry — Selection, establishment and operation of a gauging station
Approved ISO 18365
Hydrometry — Measurement of liquid flow in open channels using current meters or floats
Approved ISO 748
Hydrometry — Vocabulary and symbols
Approved ISO 772
Hydrometry — Measurement of liquid flow in open channels — Part 2: Determination of the stage-discharge relationship
Approved ISO 1100-
Hydrometry — Open channel flow measurement using rectangular broad-crested weirs
Approved ISO 3846
Hydrometry — Measurement of free surface flow in closed conduits
Approved ISO/TR 9824
Hydrometry — Water level measuring devices
Approved ISO 4373
Hydrometry — Field measurement of discharge in large rivers and rivers in flood
Approved ISO 9825
Hydrometric uncertainty guidance (HUG) Approved ISO/TS 25377
Standard Specification for ornamental Fences Employing Steel Tubular Pickets1
committee Designation: F2589 –
ASTM
Loading tests on overhead line structures committee IEC 60652
Residual strength of string insulator units of glass or ceramic material for overhead lines
committee IEC 60797
after mechanical damage of the dielectric
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V – Impulse puncture testing in air
committee IEC 61211
Overhead lines – Requirements and tests for fittings committee IEC
Hydraulic turbines, storage pumps and pump-turbines – Tendering Documents – Part 2: Guidelines for technical specifications for Francis turbines
committee IEC 61366-
Hydraulic turbines, storage pumps and pump-turbines –Tendering documents – Part 3: Guidelines for technical specifications for Pelton turbines
committee IEC 61366-
Hydraulic turbines, storage pumps and pump-turbines – Tendering Documents –Part 4: Guidelines for technical specifications for Kaplan and propeller turbines
committee IEC 61366-
Hydraulic turbines, storage pumps and pump-turbines – Tendering Documents Part 5: Guidelines for technical specifications for tubular turbines
committee IEC 61366-
Overhead lines – Meteorological data for assessing climatic loads
committee IEC 61774
Overhead lines – Requirements and tests for spacers
committee IEC 61854
Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
committee IEC 60994
Electromechanical equipment guide for small hydroelectric installations
committee IEC 1116
Hydraulic turbines, storage pumps and pump-turbines – Tendering Documents – Part 1: General and annexes
committee -
Overhead lines – Calculation of the electrical component of distance between live parts and obstacles – Method of calculation
committee IEC
Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
committee IEC 61952
Hydraulic machines – Acceptance tests of small hydroelectric installations
committee IEC 62006
Insulators – Glossary of terms and definitions committee IEC 62223
Overhead lines – Method for fatigue testing of conductors
committee IEC 62865
Power transformers – Part 15: Gas-filled power transformers
committee IEC 60076-
Power transformers – Part 5: Ability to withstand short circuit
committee IEC 60076-
Power transformers –Part 14: Liquid-immersed power transformers using high-temperature insulation materials
committee IEC 60076-
Power transformers –Part 10: Determination of sound levels
committee IEC 60076-
Power transformers – Part 10-1: Determination of sound levels – Application guide
committee IEC 60076- -
Power transformers – Part 11: Dry-type transformers
committee IEC 60076-
Power transformers –Part 13: Self-protected liquid-filled transformers
committee IEC 60076-
Overhead lines –Requirements and tests for Stockbridge type aeolian vibration dampers
committee IEC 61897
Power transformers – Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors
committee IEC/TS 60076-
Power transformers – Part 20: Energy efficiency
committee IEC TS 60076-
Surge arresters –Part 4: Metal-oxide surge arresters without gaps for a.c. systems
committee IEC 60099-
Surge arresters –Part 5: Selection and application recommendations
committee
IEC 60099-
Guidance for the selection of high-voltage A.C. cable systems
committee IEC 60183
Tap-changers –Part 2: Application guide committee IEC- -
Terminal and tapping markings for power transformers
committee IEC-
Converter transformers –Part 1: Transformers for industrial applications
committee IEC 61378-
Overhead electrical conductors - Calculation methods for stranded bare conductors
committee IEC-
Guide for the Application, Specification, and Testing of Phase-Shifting Transformers
committee IEC 62032
SOLAR FLAT PLATE COLLECTOR-SPECIFICATION PART 1 REQUIREMENT
Approved IS 12933 (Part 1)
SOLAR FLAT PLATE COLLECTOR-SPECIFICATION PART 2 COMPONENTS
Approved IS 12933 (Part 2)
SOLAR FLAT PLATE COLLECTOR-SPECIFICATION PART 3 MEASURING INSTRUMENTS
Approved IS 12933 (Part 3)
SOLAR FLAT PLATE COLLECTOR – SPECIFICATION PART 5 TEST METHODS
Approved IS 12933 (Part 5)
SOLAR WATER HEATING SYSTEMS CODE OF PRACTICE
Approved IS 12976
BIOGAS PLANTS- GLASS FIBRE REINFORCED POLYESTER RESIN GAS HOLDERS -SPECIFICATION PART 1 WITH STEEL FRAME
Approved IS 12988 Part 1
SOLAR HEATING-DOMESTIC WATER HEATING SYSTEMS PART1 PERFORMANCE RATING PROCEDURE USING INDOOR TEST METHODS
Approved IS 13129 Part 1
SOLAR HEATING-DOMESTIC WATER HEATING SYSTEMS PART 2 PROCEDURE FOR SYSTEM PERFORMANCE CHARACTERIZATION AND YEARLY PERFORMANCE PREDICATION
Approved IS 13129 Part 2
TC- 9 Textile and leather
Textiles fabrics- determination of width and length-test method
approved ISIRI 9528 st.Edition
50% cotton-50% polyester yarn-specification approved ISIRI 4564 1st
Edition
Leather-chemical tests determination of volatile matter approved ISIRI 315
Sampling cotton fibers for testing approved ISIRI 6145 1st
.Edition
Leather-physical and mechanical tests determination of thickness-test method
approved ISIRI 879
Textile- knitted blanked specification approved ISIRI 6376 1st
Edition
Textile- floor covering-determination of types of usual knots in hand made carpets
approved INSO 477
Leather – Physical and mechanical tests – Determination of the static absorption of water
nd Edition
committee ISIRI 316
Artificial leather for upper of shoes specifications and test methods
committee ISIRI 4266
vocabulary of terms used in carpet industry nd Edition
committee ISIRI 1460
TC-14 Environmental
Mobile waste and recycling containers Part 5: Performance requirements and Test methods
approved INSO 18658-
Mobile waste and recycling containers Part 6: Safety and health requirements
approved INSO 18658-
Soil quality — Guidance for burial of Animal carcasses to prevent epidemics
approved INSO 19106
Standard practice for processing mixtures fly ash and heavy Metal wastes in structural fills and other constriction.
Enquiry ASTM-E- -
Landscape - Design of Sprinkler Irrigation – Code of Practice
Enquiry INSO-
Standard practice for shredder explosion protection Enquiry ASTM E- -
Compostable plastics – Specifications Enquiry INSO-
Packaging and the environment energy recovery Enquiry INSO-
Standard guide for household hazardous waste training outline for household hazardous waste collection operation1
committee ASTM- D6498-
Drainage of landfill-design construction and operation committee INSO-
TC- 17 Chemical & Plastic standards
Standard Specification for Rigid Poly (Vinyl Chloride)(PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
Approve ASTMD4726
Standard Specification for Carpet cleaning products high foam formulations in liquid form
Approve ISIRI2364
Safety of toys – safety aspects related to mechanical and physical properties
Approve ISIRI 6204
Liquid oven cleaners specifications and test methods Approval ISIRI 6071
Detergents Glass Cleaner Specifications and test methods
Approve ISIRI3305
Tires Safety regulations for tires in service condition specification
Approval ISIRI16630
Paint and varnishes-Artists’ watercolor Specifications Approval ISIRI17355
Standard Sulfuric Acid for industrial use Specifications and test methods
Approval ISIRI210
Standard Specification for Sulfonic Plastics(SP) Approval ASTMD6394
Standard Test Method for Density and Dimensions of Preformed Pipe –Covering -Type Thermal Insulation1
Approval ASTM C302
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics1
Approval ASTM D256
Standard of Test Method for Tensile Properties of Plastics1
Approval ASTM 638
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics1
Approval ASTM D1003
Standard Test Method for Vicat Softening Temperature of Plastics1
Approval ASTM D1525
Standard Test Method for Time-to-Failure of Plastic Pipe under Constant Internal Pressure1
Approval ASTM D1598
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings1
Approval ASTM D2122
Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) 1
Approval ASTM D2444
Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition1
Approval ASTM D3681
Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique 1
Approval ASTM F610
Standard Test Methods for Resistance to Short -Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings1
Approval ASTM D1599
Standard Test Method for Tensile, Compressive, and Flexural Creep and Creep - Rupture of Plastics 1
Approval ASTM D2990
Standard Specification Single-use rubber gloves for general applications
Approval INSO 16407
Standard Specifications for Rubber Boots and Knee Boots
Approval ISIRI 1383
DRAFT AFGHAN STANDARDS BY SECTOR
TECHNICAL COMMITTEE (TC)
TOTAL
STAGES
proposal preparatory Committee Enquiry Approval Publication
TC- -
- -
TC-
- -
TC- - -
-
TC- -
- -
TC-
TC- - -
-
TC- - -
- -
TC- - -
-
TC- - -
- - -