Upload
duongthien
View
219
Download
0
Embed Size (px)
Citation preview
Pwr Mute
Vol+
Vol-
A0129 Keypad
3
A0129 ... Keypad controller for use with the A0350, WA-350/WA-351Features:
• Controls Channel Vision’s A0350, WA-350, and WA-351
• Available in white
Power button.Turns off the audio and video playing in a zone.
Mute button.Mutes the audio playing in a zone (video will still be present).
IR receiver.Detects IR signals and repeats through the IR system.
Volume +/- buttons.Increases or decreases the audio level in a zone.
2
Wiring the A0129 keypad... Keypads connect to the through the RJ45 jacks on the back panel of these products. Connections to the A0129 may be accomplished either by using the RJ45 jack or the screw terminals provided on the back side of the keypad. When using the RJ45 jacks, simply wire both ends of the cable according to the TIA568A standard. When using the screw terminals on the A0129, make sure to wire the RJ45 plug connecting to the as shown below.
A0350, WA-350/WA-351
A0129
A0350/WA-35x
Front Rear
Pin
8: +
VD
C
Pin
7: G
round
Pin
4: IR
sig
nal
Pwr Mute
Vol+
Vol-
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
N.C.
Pin
7: G
round
Pin
8: +
VD
C
Pin
4: IR
sig
nal
Pwr Mute
Vol+
Vol-
A0129 Keypad
3
A0129 ... Keypad controller for use with the A0350, WA-350/WA-351Features:
• Controls Channel Vision’s A0350, WA-350, and WA-351
• Available in white
Power button.Turns off the audio and video playing in a zone.
Mute button.Mutes the audio playing in a zone (video will still be present).
IR receiver.Detects IR signals and repeats through the IR system.
Volume +/- buttons.Increases or decreases the audio level in a zone.
2
Wiring the A0129 keypad... Keypads connect to the through the RJ45 jacks on the back panel of these products. Connections to the A0129 may be accomplished either by using the RJ45 jack or the screw terminals provided on the back side of the keypad. When using the RJ45 jacks, simply wire both ends of the cable according to the TIA568A standard. When using the screw terminals on the A0129, make sure to wire the RJ45 plug connecting to the as shown below.
A0350, WA-350/WA-351
A0129
A0350/WA-35x
Front Rear
Pin
8: +
VD
C
Pin
7: G
round
Pin
4: IR
sig
nal
Pwr Mute
Vol+
Vol-
Pin 8: +VDC
Pin 7: Ground
Pin 4: IR signal
N.C.
Pin
7: G
round
Pin
8: +
VD
C
Pin
4: IR
sig
nal
CHANNEL V ISION
SOURCE
ZONEPOWER
MUTE
43
21CAMERA
CATV
MOD
VOL
1
2
3
4
MODELA0505
POWER
TM
CHANNEL VIS
ION
SO
UR
CE
ZONE
POWE
RMUTE
VOL
1
2
3
4
MODEL
A0501
POWER
Pwr Mute
Vol+
Vol-
Power button will turn off/on zone
When the system is powered back on each zone will return
to its previous volumelevel and source
selection.
Using the A050 remote control..(Download IR codes at: www.channelvision.com and www.remotecentral.com)
5 designed to control your A0350, WA-35x.
Pwr Mute
Vol+
Vol-
Zone Power - Turns on/off the zone you are in
Power - Master power (turns all zones on/off)
Mute - Mutes the audio for the zone you are in
VOL - Controls volumefor the zone you are in
4 5
A0350
WA-350/WA-351
A0129
A0129
Keypad Input... Connect the A0129 here
CAT5 Audio Input... Connect the output of your CAT5 audio hub here
Connection to A0350, WA-35x Amplifier
CAT5 Audio Input... Connect the output of your CAT5 audio hub here
Keypad Input... Connect the A0129 here
CHANNEL V ISION
SOURCE
ZONEPOWER
MUTE
43
21CAMERA
CATV
MOD
VOL
1
2
3
4
MODELA0505
POWER
TM
CHANNEL VIS
ION
SO
UR
CE
ZONE
POWE
RMUTE
VOL
1
2
3
4
MODEL
A0501
POWER
Pwr Mute
Vol+
Vol-
Power button will turn off/on zone
When the system is powered back on each zone will return
to its previous volumelevel and source
selection.
Using the A050 remote control..(Download IR codes at: www.channelvision.com and www.remotecentral.com)
5 designed to control your A0350, WA-35x.
Pwr Mute
Vol+
Vol-
Zone Power - Turns on/off the zone you are in
Power - Master power (turns all zones on/off)
Mute - Mutes the audio for the zone you are in
VOL - Controls volumefor the zone you are in
4 5
A0350
WA-350/WA-351
A0129
A0129
Keypad Input... Connect the A0129 here
CAT5 Audio Input... Connect the output of your CAT5 audio hub here
Connection to A0350, WA-35x Amplifier
CAT5 Audio Input... Connect the output of your CAT5 audio hub here
Keypad Input... Connect the A0129 here
IR-4180 ... IR link cable. Can be used to transmit IR
A0501, A0502, or A0505 ... Remote control. Contains IR codes for controlling the Amplified Wireless Audio Receiver as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
A0127 ... IR repeating keypad.codes to operate the volume controls in the Amplified Wireless Audio Receiver. You may also use a standard IR receiver or a 3rd party keypad. When using a simple IR receiver, you will need to use the A0505 remote control which contains the IR codes to control the WA-350, WA-351, and A0350. IR codes can be downloaded from www.channelvision.com, or learned from an A0505 remote control.
The A0127 contains the IR
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol+
Vol-
TMCHANNEL V ISION
SOURCE
ZONEPOWER
MUTE
VOL
1
2
3
4
MODELA0501
POWER
Accessories & Complementary Products (sold separately)
In-wall, In-ceiling Speakers, and Free Standing Speakers... Channel Vision offers a full line of premium speakers. These speakers are perfect for whole-house music or home theater applications.
Using the A0350 and A0129 in a Stand-alone SystemThe A0350 can be flush-mounted in a room to power in-wall speakers. By connecting the audio outputs from an audio source to the RCA inputs of the A0350, the audio signal will be amplified to the in-wall speakers. Most audio sources only offer a fixed audio output, A0350 volume level can be adjusted by using an A0129 keypad or by connecting an IR-2400 and using a compatible remote such as model A0505. The RCA audio outputs on the back of the A0350 can be connected to a powered subwoofer to add more bass to your audio system.
A0129
A0350
Pwr Mute
Vol+
Vol-
TM By CHANNEL VISION
Ar ia
Local InActiveSpkrs 24VDCIR In
Flush Mount Amplifier
Left Right
CD player
The keypad volume control will determine the volume of the in-wall speakers as well
as the powered subwoofer.
Powered Subwoofer
6 7
IR-4180 ... IR link cable. Can be used to transmit IR
A0501, A0502, or A0505 ... Remote control. Contains IR codes for controlling the Amplified Wireless Audio Receiver as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
A0127 ... IR repeating keypad.codes to operate the volume controls in the Amplified Wireless Audio Receiver. You may also use a standard IR receiver or a 3rd party keypad. When using a simple IR receiver, you will need to use the A0505 remote control which contains the IR codes to control the WA-350, WA-351, and A0350. IR codes can be downloaded from www.channelvision.com, or learned from an A0505 remote control.
The A0127 contains the IR
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol+
Vol-
TMCHANNEL V ISION
SOURCE
ZONEPOWER
MUTE
VOL
1
2
3
4
MODELA0501
POWER
Accessories & Complementary Products (sold separately)
In-wall, In-ceiling Speakers, and Free Standing Speakers... Channel Vision offers a full line of premium speakers. These speakers are perfect for whole-house music or home theater applications.
Using the A0350 and A0129 in a Stand-alone SystemThe A0350 can be flush-mounted in a room to power in-wall speakers. By connecting the audio outputs from an audio source to the RCA inputs of the A0350, the audio signal will be amplified to the in-wall speakers. Most audio sources only offer a fixed audio output, A0350 volume level can be adjusted by using an A0129 keypad or by connecting an IR-2400 and using a compatible remote such as model A0505. The RCA audio outputs on the back of the A0350 can be connected to a powered subwoofer to add more bass to your audio system.
A0129
A0350
Pwr Mute
Vol+
Vol-
TM By CHANNEL VISION
Ar ia
Local InActiveSpkrs 24VDCIR In
Flush Mount Amplifier
Left Right
CD player
The keypad volume control will determine the volume of the in-wall speakers as well
as the powered subwoofer.
Powered Subwoofer
6 7
500-300 revA
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(714) 424-6500. A Return Authorization number must be obtained
in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
1Stripping and Connecting CAT5 Wire
BladeCAT5
1. Place the CAT5 between the blade and the first notch of the J-110 tool.
CAT5 cable should be stripped with a proper stripping tool, such as Channel Vision’s J-110 tool.
Slight pressure
Rotate1 turn only
2. Rotate the tool only once. Multiple turns could damage the inner wires.
3. Inspect the inner wires for damage. If any wires are cut start over at step 1.
Check for damage
Green/White - Left channel groundGreen - Left channelOrange/White - Right channel groundBlue - SignalBlue/White - StatusOrange - Right channel
Brown/White - GroundBrown - 24vDC
TIA-568A RJ-45 Modular Plug
Side view:
Top view:
500-300 revA
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(714) 424-6500. A Return Authorization number must be obtained
in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
1Stripping and Connecting CAT5 Wire
BladeCAT5
1. Place the CAT5 between the blade and the first notch of the J-110 tool.
CAT5 cable should be stripped with a proper stripping tool, such as Channel Vision’s J-110 tool.
Slight pressure
Rotate1 turn only
2. Rotate the tool only once. Multiple turns could damage the inner wires.
3. Inspect the inner wires for damage. If any wires are cut start over at step 1.
Check for damage
Green/White - Left channel groundGreen - Left channelOrange/White - Right channel groundBlue - SignalBlue/White - StatusOrange - Right channel
Brown/White - GroundBrown - 24vDC
TIA-568A RJ-45 Modular Plug
Side view:
Top view: