NC COM GND 1 2 3 4

Two signal lines Two signal lines

voice box

The power cord The power cord

Warning sensor

socket

Moving detection and emails

Step 1: open the desk menu by right-click → main menu → set up → Alarm →

Motion

Step 2: enable the motion function

Step 3: set up the trigger, click the “settings”

Step 4: Click the email in “alarm” window and enable all channel “Snap”

Then click “OK” button to save settings.

Step 5: set the motion Area, click the settings

Step 6: choose the motion area you want, click and drag the mouse, the screen with

block is the motion area you want

Step 8: right- click → adjust Sensitivity ( remark: the number smaller, the sensitivity

higher) → click “save”

Step 9: click “Apply” bottom to save the motion settings

Step 10: click the “Exit” button into “setup” window

Step 11: click the “network” into network settings

Step 12: choose the email menu

Step 13: set the send email smtp server

Step 14: tick the SSL cheek

Step 15: set the send email address

Step 16: set the send email password

Step 17: set the receive email address

Step 18: click “Test”button for Test settings

Step 19: The test result will be displayed in warning window

Step 20: click “ok” bottom to exit

Step 21: click “exit “to exit network window

Remark: you will receive the alarm email if the motion alarm done

Email setting:

Please follow up the below link to set up the email notification:

https://support.zositech.com/hc/en-us/articles/115004611987-How-to-use-a-new-G

mail-account-to-set-DVR-mail-alarming-

How to add device (DVR) in ZOSI VIEW?

1. Open your ZOSI VIEW app, input your app's register name and app's register

password. Click “Login”.

NOTE: MAKE SURE THE CLOUD SERVER STATUS OF YOUR DVR IS

CONNECTED.

2. Click the“ ”in the topleft, select “Device Manager”.

Enter into “Device Manager”, click the“ ”in the top right.

3. Get into “Add Device”, input your device information (refer to the below picture).

After that, click the bottom of “Add Device”.

4. Then, click the“ ”in the top left, select the “Live Preview”.

Enter into “Real time monitoring”, click the “ ” in the top right.

In the interface of “Channel List”, select the device which you want to preview,

click the “ ”.

After that, the grey icon ( ) will change to colorful ( ), click the bottom of

“Start Live View”.

5. Finally just wait a little moment, you can view your DVR on your phone.

Wifi setting

Remark: Our DVR only can be compatible for RT3070 or RT5370 Wifi module as

picture:

Connection: Plug RT3070 or RT5370 Wifi module into the USB2.0 interface.

Operation Steps:

Step 1: open the desk menu by right-click → set up → Network

Step 2: choose the WIFI set up

Step 3: tick the “wifi enable”

Step 4: click the “Search signal” button to search wifi

Step 5: then input the wifi password you have searched

Step 6: click the “set up” button

Step 7: click the “Apply” button

Step 8: click the “exist” button to exist the window, it will be displayed in warning

window, click “ok” and back to the Main menu.

Step 9: when you finish all those steps , click the “information” button

Step 10: click the “network” button to check the Internet is OK.

Quick Operation Guidance

POWER

RECORD

HDISK

NETWORKESCREC PLAY PTZ MENU

ENT

1

How to connect DVR to LAN ?Do it as follow diagram

Unplug modem then connect router and device

① ②

③ ④

Optical Fiber DSL Router

DVR/NVR

PC

RJ45 cable

WIFI or RJ45 Cable

Step 1.

DSL/CABLE moDEm

DSL/CABLE moDEm

DSL/CABLE moDEm

DSL/CABLE moDEm

RoUTER

RoUTER RoUTER

DVR

2

Note: Before monitoring via smartphone or computer, please ensure your DVR can be connected to internet.

Step 2. How to test your DVR network ?(1) Right click mouse - main menu - Set up - Network, (2) Tick “Obtain IP address automatically”(3) Click “Test”,if remind “OK”, that is, connect network successfully.Note: Please ensure DHCP in your router is open

3

Step 3. Remote Monitoring

A: Smartphone Remote Monitoring

(1) iPhone/iPad User: Search SECU365 in app store and install it, or scan the following QR code to download secu365

Appstore QR code

(2) Android User: Search SECU365 in google play and install it, or scan the following QR code to download SECU365

Android QR code

(3) The login interface instructionStart SECU365 as following

4

Name: Device name (It is convenient you distinguish the different device) GID Serial ID in DVR, which can be obtained DVR system menu (Main menu-information-System- Serial ID). It can be input via QR code scaning User: admin (defaulted, same as DVR system password) Password: Null(Defaulted, same as DVR system password) Channel Number DVR channel

Note: If fail to preview surveillance system as above, try to setting a fixed IP address as following

5

1. Vist your router, and open it as below

2. Find the router subnet mask(for example:255.255.255.0),Preferred DNS server(for example: 211.136.192.6), alter DNS Server(for example:114.114.114.114)

3. Input Subnet mask, Preferred DNS server and alter DNS Server in DVR menu accordingly, DVR system menu path is : Main menu – Set up - Network

Note: Please ensure the IP address you input is not used by other device, such as, computer, server, etc.

Click “Test”,if remind “OK”, that is, connect network successfully.

6

B. ：IE browser remote monitoring

(1) Please input the website http://www.secu365.net/ on your PC use the IE browse, the page will automatically jump to the picture as the follow

(2) press register as the follow picture

7

(3) after finish register, please back to http://www.secu365.net , input your information in the login account and login password

3.1 Enter into Tool bar and select to appear the below picture:

3.2 Select icon and tick the settings of “ActiveX controls and plug-ins” to enable, details as follows:

3.3 Lastly, after tick all the “Enable”, please click to exit. at this moment, you could input IP address to run your program.

3.4 Click" ",then download the "anycam.exe" file and run it.

8

Remind: If the widgets are not downloaded and run successfully, please check if your browser’s safety level or firewall setting is too advanced.

open IE browser to enter into tool Internet option Internet user-defined level enable widgets.Downloading and running install widgets need one minute, please wait…patiently.

(4) click the “Devices” button

Device ID: The same you input in your mobileDevice Name: Device name, it is used to distinguish the different deviceDevice username: It is default admin (same as DVR system paswword)Device Password: It is default none (same as DVR system paswword)Channels: DVR channel

(5)Click “live”, then it will jump the follow picture

The product features, specifications, pictures, etc. should be subject to real products. We reserve the rights to modify all of them without notice.

Schedule recording：

1. Please go to DVR Main Menu > Setup > Schedule recording.

2. Double –click Left key of Mouse to someday( according to your needs)

3. Add the needed recording time(Start time-End time), then click“√”

Note: Time only can set “Hour” and “Minute”, No “seconds”

4. If you need every day (From Monday to Sunday) records, pls click”Copy”,then click “OK”

5. You can set every day recording, setting OK!