Installation Guide

Note to the installer■ Beforeattemptingtoconnectoroperatethisproduct,pleasereadthelabelontherearofthemainmonitor.

■ Pleasereadthisguidecarefully,andinstalltheproductsafelyandcorrectlybyfollowingtheinstructions.Carefullyreadtheinformationfoundinthesectiontitled"Foryoursafety"inparticular.

■ Onlyuseattachments/accessoriesspecifiedbythemanufacturer.■ Theinstallationshallbecarriedoutinaccordancewithallapplicableinstallationrules.■ Panasonicassumesnoresponsibilityforinjuriesorpropertydamageresultingfromfailuresarisingoutofimproperinstallationoroperationinconsistentwiththisguide.Additionally,anyresultingmalfunctionwillnotbecoveredunderthewarranty.

■ Afterinstallation,makesuretoleavethisguidewiththecustomer.

For the Installation of door station and main monitor station

•VL-V554EXisasurfacemounttype,VL-V554UEXisaflushmounttype.

For your safetyTopreventsevereinjuryandlossoflife/property,readthissectioncarefullybeforeusingtheproducttoensureproperandsafeoperationofyourproduct.

WARNINGPreventingfire,electricshockandshortcircuits● Leaveinstallationworktothedealer.Installationworkrequirestechniqueandexperiences.Failuretoobservethismaycausefire,electricshock,injury,ordamagetotheproduct.Consultthedealer.● Electricalconnectionworkshouldbeperformedbycertifiedpersonnelonly.Certificationisrequiredforperformingelectricalconnectionwork.Consultyourdealer.● Useonlythespecifiedpowersupplyunit.● Donotattempttodisassembleormodify thisproduct.Contactanauthorisedservicecentreforrepairs.● Neverinstallwiringduringalightningstorm.● Donotconnectnon-specifieddevices.● Donotconnectapowercabletoaterminalthatisnotspecifiedinthisguide.●Whenopeningholes inwalls for installationorwiring,orwhensecuring thepowercable,makesureyoudonotdamageexistingwiringandductwork.● Donotmakeanywiringconnectionswhenthepowersupplyisturnedon.● Donotusethesuppliedpowersupplyunitforoutdoorinstallations(itisforindooruseonly).● Donotinstallthemainmonitorandpowersupplyunitinthefollowingplaces:- Placeswherethemainmonitorandpowersupplyunitmaybesplashedwithwaterorchemicals.- Placeswherethereisahighconcentrationofdust,orhighhumidity.● Donotperformanyactions(suchasfabricating,twisting,stretching,bundling,forciblybending,damaging,altering,exposingtoheatsources,orplacingheavyobjectsonthepowercable) thatmaydamagethepowercable.Usingtheproductwithadamagedpowercablemaycauseelectricshock,shortcircuits,or fire.Contactanauthorisedservicecentreforrepairs.●Whenexistingchimewiresareused, it ispossible that theycontainACvoltage.Contactanauthorisedservicecentre.

● Donot installorusetheproduct inhealthcare facilities ifanyregulationsposted inthearea instructyounot todoso.Hospitalsorhealthcare facilitiesmaybeusingequipmentthatcouldbesensitivetoexternalRF(radiofrequency)energy.● Donot install oruse thisproductnearautomatically controlleddevicessuchasautomaticdoorsandfirealarms.Radiowavesemitted fromthisproductmaycausesuchdevicestomalfunction,resultinginanaccident.

Preventingaccidentsandinjuries

CAUTION

● Ifthewiringisunderground,donotmakeanyconnectionsunderground.● Ifthewiringisunderground,useaprotectiontube.● Ifthewiringisoutdoors,useaprotectiontubeorasurgeprotector.

● Install theproductsecurelyadhering to the instructions in thisguide toprevent it fromfallingoff thewall.Avoid installingonto low-strengthwalls,suchasgypsumboard,ALC(autoclavedlightweightconcrete),concreteblock,orveneer(lessthan18mmthick)walls.

Preventingelectricshock

Preventinginjury

1-62,4-chome,Minoshima,Hakata-ku,Fukuoka812-8531,Japan

©PanasonicSystemNetworksCo.,Ltd.2013PNQW3982ZA PC1113MT1113

VL-V554EX/VL-V554UEX

VL-MWD501EX

Doorstation Mainmonitorstation

Doorstationisdescribedas"doorphone"andMainmonitorstationisdescribedas"mainmonitor"inthisguide.

ModelNo. VL-SWD501EXVL-SWD501UEX

Wireless Video Intercom System

Toavoidmalfunctionorcommunicationdisturbances,donotinstallthedoorphoneorthemainmonitorinthefollowinglocations:- Placeswherevibrationoranyotherkindofimpactoccurs.- Placeswhereechoingisfrequent.- Placesnearahighconcentrationofdust,hydrogensulphide,ammonia,sulphur,ornoxiousfumes.

■ For the doorphone● Ifastronglightisshiningonthedoorphone,thevisitor’sfacemaynotbedistinguishable.Donotplacethedoorphoneinthefollowinglocations:- Wheremostofthebackgroundisthesky.- Wherethebackgroundisawhitewall,anddirectsunlightwillreflectoffit.- Wheredirectsunlightwillshineonthedoorphone.

● Donotplace thedoorphone in locationswhereechoingoccurs,as thiswill cause thedoorphonetobeepfrequently.● Dustprotection/waterprotectionisIP54.Onlywheninstallationworkspecifiedinthisguideisproperlyperformedandappropriatewaterprotectiontreatmentisperformed.●Makesuretherearofthedoorphoneisnotsubjecttowater.● Dependingontheinstallationlocation,condensationmayformonthedoorphone’slenscover.Thismaycauseimagestobecomeobscured.Condensationwilldissipateasthetemperaturerises.

■ For the main monitor● Install themainmonitoraway fromelectronicappliancessuchasTVs, radios,personalcomputers,airconditioners,boilercontrolpanelswith intercom,homesecurityequipment,wirelessdevices,ordigitalcordlessphones.● Donotinstallthemainmonitorinplaceswhereitwillbeaffectedbyextremelyhigh-frequencyradiowaves(nearbroadcastingantennasetc.).Thismaycausethedisplaytoflickeroraninterruptingnoisetooccur.● Leaveat least20cmofspaceabove,below,and to the leftand rightsidesof themainmonitor.Donotinstallonawallthatisdeeplyrecessed.● Donotinstallthemainmonitorinsideawall.● Besuretoinstallthemainmonitormorethan5mawayfromthedoorphone.● Theproduct operates in the frequency rangeof 1.88GHz to 1.90GHz, and theRFtransmissionpower is250mW(max.).Refer to the"Forbestperformance"section in theOperatingInstructions.● Inareassurroundedbyahighelectricalfield,disturbancesmayoccur inthemainmonitor’simageorsound.

Supplied accessories for installation■ For the doorphone

(EXonly)

Mountingbase×1

(UEXonly)

Flushmountingbox×1

Screw×4(Usedwheninstallingthedoorphone)(EX:4mmx12mm)(UEX:4mmx25mm)

Nameplate×2(incl.1spare) Hexwrench×1

■ For the main monitor

Mountingbracket×1

Cablebinder×1

■ Power supply unit and related items

Powersupplyunit×1

(PartNo.VL-PS240)Cablebinder×2

Important: ●You will need the following additional items to install and configure the doorphone and the main monitor. [Locally procured]- Screws(formountingbase:×2,formountingbracket:×2):Preparethescrews( thedrawingontheright)accordingtothematerial,structure,strengthandotherfactorsofthemountingareaandthetotalweightofobjectstobemounted.- Powercables(AC/DCcables),wires(fordoorphoneandotherconnections):Preparecablesandwiresoftheappropriatespecification.( "Wiretypeandlength")

Note:● Theillustrationsinthesuppliedmanual(s)mayvaryslightlyfromtheactualproduct.

4mm

Precautions for installation

Wiring schematic diagramSetupcorrectlyaccordingtothefollowingwiringschematicdiagramand"Wiretypeandlength".● Forinformation,suchasordernumbers,aboutoptionaldevicesthatcanbeconnectedto,refertothe"Additional/replacementaccessories"sectionintheOperatingInstructions.

MAIN MONITOR

DOORPHONE 1

DOORPHONE 2

POWER SUPPLY UNIT

220-240VAC

Connectiondeviceforoptionoutput(Acontact)

*1MakesuretoonlyconnectelectricvehiclegatelockstotheS3/S4terminalsofthedoorphones.

*2MakesuretoonlyconnectelectricdoorlockstotheS1/S2terminalsofthedoorphones.

NP: Non-polarised

Powersupply

Powersupply

Powersupply

Powersupply

12VAC/DC

12VAC/DC

12VAC/DC

12VAC/DC

Electriclock(Electricvehiclegatelock)*1

Electriclock(Electricdoorlock)*2

Electriclock(Electricdoorlock)*2

Electriclock(Electricvehiclegatelock)*1

24VDC

Wire type and length

WiringrunWiretype*1

Diameter Length(Max.)

Mainmonitor–Doorphone

A

φ0.65mm 22AWG 100m

φ1.0mm 18AWG 130m

φ0.5mm CAT5 50m

Mainmonitor–Powersupplyunit

Bφ0.65mm 22AWG 10m

φ1.0mm 18AWG 20m

Powersupplyunit–ACpowersource

C φ1.2mm-φ2.0mm(17AWG-12AWG) Norequirement

Doorphone–Electriclock*2

D φ0.5mm-φ1.2mm(24AWG-17AWG)

Accordingtospecifi-cationofconnected

device.

Mainmonitor–Connectiondeviceforoption

output(Acontact)*2E φ0.5mm-φ1.2mm

(24AWG-17AWG)

Accordingtospecifi-cationofconnected

device.

*1Type:Single-paircablewithoutersheath(jacket)Conductor:Coppersolid● Acertifiedpowersupplywiringhastobeusedwiththisequipment.Therelevantnationalinstallationand/orequipmentregulationsshallbeconsidered.AcertifiedpowersupplywiringnotlighterthanordinarypolyvinylchlorideflexiblewiringaccordingtoIEC60227shallbeused.

*2Whenusinganelectriclockoraconnectiondeviceforoptionoutput(Acontact),selectadevicethatmeetsthefollowingguidelines:● Electriclockconnectionterminal(S1/S2,S3/S4):- N/Odryclosurecontact- 12VAC/DC,lessthan1A

●Connectiondeviceforoptionoutput(Acontact)terminal(OUT1/OUT2):- 24VAC/DC,lessthan0.3A(minimumcontact:5VDC1mA)

A D

DE

B

C

NP

NPNP

NP

NP

NP

NP

NP

ScrewA

Youcanusethe[Wide/Zoomsettings]settingonthemainmonitortoselecttheareathatisvisiblewhenavisitorcalls;availablesettingsare[Wide],[Zoom],and[All](entireimagedisplay).(Defaultsetting:[Wide])

● Thefollowingvaluesareforwhenthedoorphoneisinstalledinthestandardposition(thecentreof thedoorphone’sheight isapproximately1,450mm)andatadistanceofapproximately500mmfromthecameralens.

■ Installation height and area visible by the camera lens

When set to zoom

Displaysaportionofthewideimageat2timesthesize.● Becauseadigital zoom isused, the imagequalityof zoomdisplayislowerthanthatofwidedisplayorentireimagedisplay.

Imagedisplayedonmainmonitor:

● Youcanusethemainmonitor’s [Zoompositionsettings]settingtoselect thedesiredareavisiblewhenzooming.Refertothefollowingandconfigurethemainmonitor.

Entire image display

Theareaaboveandbelowthewideimageisvisible.

Important:● Onthebottomsurfaceofthedoorphoneandthemountingbase,thereareholestoallowwatertodrain.Donotcoverthemupwheninstalling.●Whenexistingwiring(suchaschimewires)isused:- ItmaycontainACvoltagethatmaycauseelectricshockand/ordamagetheproduct.- Neverusethefollowingtypesofwiring.Consultaqualifiedtechnician/dealer.

VL-V554EX VL-V554UEX

1 Attachthemountingbasetothewallsecurely.

Mountingbase(accessory)

Wire(locallyprocured)

Wall

83.5mm

Screws(locallyprocured)×2

● Installthemountingbaseonaverticalflatwall.

1 Installtheflushmountingboxinthewall.

Flushmountingbox(accessory)

100mmKnockouthole*1

151mm

37mm

*1Onlyopentheknockoutholesasrequiredforthewiring.

2 Useahexwrench(accessory)toloosenscrewAandremovethefrontpanelofthedoor-phone.

ScrewA

Frontpanel

2mmhexwrench (accessory)

3 Connectthewires.

Terminalforthemainmonitor

<Rear view>

Terminalsfortheelectriclocks● Recommendedtorque:0.5N·m{5.1kgf·cm}●Maximumtorque:0.7N·m{7.1kgf·cm}

3-1Loosenthescrews.3-2Pushinthewirestotheterminalconnectors(non-polar),thentightenthescrews.

4 Attachthedoorphonetothemountingbase.

Screws(accessory)×4

4 Attachthedoorphonetotheflushmountingbox.

Screws(accessory)×4

5 AttachthenameplatetothedoorphoneandusescrewAtosecurethefrontpanel.●Writethenameonthenameplateasneeded.

Nameplate(accessory)

ScrewA ●Recommended torque:0.35N·m{3.6kgf·cm}

Approx.500

Approx.170°

Approx.2,250

Imagerange

Approx.115°

Approx.500

Imagedisplayedonmainmonitor:

Approx.1,600

Approx.650

Approx.1,450

Upanddown Leftandright(whenlookingfromabove)

Up ImagerangeApprox.2,050

Approx.500

Centreofdoorphone

Approx.45°

Centre (default)

Approx.45°

Approx.500

ImagerangeApprox.1,650

DownApprox.45°

Approx.500

Approx.1,400

Imagerange

Left

Approx.1,500Approx.1,450

Approx.550

Approx.1,450 Approx.1,250

Approx.400

Installing the doorphone■ About the installation location

● Thedevicemustbeinstalledinsideanelectricalpanelorcabinet.● Areadilyaccessibledisconnectdeviceshallbeincorporatedexternaltotheequipment.- Externaldisconnectdevicemustbecertifiedandhaveacreepageandclearancedistanceof3mmormore.

■ Precautions for wiring●Makesureyouturnoffthepoweratthebreakerbeforeperforminganywiringwork.● AlwaysconnectACorDCcables to theappropriateconnection terminals. IncorrectlyconnectingtheACorDCcablesmaydamagethepowersupplyunit.● Toprevent thepowercables fromdisconnectingandtopreventelectricshock,securethepowercablesusingthecablebinders(accessory)andattachthecablecovers.

How to connect the power cable (AC/DC)

1 StriptheAC/DCcablesasfollows:

7mm

45mm<ACcable>

<DCcable>25mm

7mm

2 Removethescrews(B)andthenremovethecablecovers(A).

3 ConnecttheAC/DCcabletotheACINterminal/DCOUTterminalonthetopandbottomofthepowersupplyunit,andthensecurethewiresbytighteningthescrews.

● Recommendedtorque:- ACterminal:0.4N·m{4.1kgf·cm}- DCterminal:0.45N·m{4.6kgf·cm}

<Frontview>ACcable*1

DCcable

Screws

*1

Cablebinders(accessory)

4 Usethecablebinders(accessory)tosecuretheAC/DCcables(double-coatedarea)tothepowersupplyunit.

5 Makesuretoreplacethecablecovers(A).

Connectthepowersupplyunit(accessory)andAC/DCcables(locallyprocured).

CAUTIONInsertthecablesfirmlyallthewayintotheterminals.Ifthecablesarenotinsertedalltheway,heatmaybegenerated.

*1Makesurethattherearenobarewiresexposedoutsidetheproduct.

Screws(B)Cablecovers(A)

DCOUTterminal

ACcablebinderhole

ACINterminal

<Topview>

<Bottomview>

DCcablebinderhole

Power supply unit (with cable covers removed)

Attach to the DIN rail

Attachintheorderdescribedbelowsothathook(b)ispositionedatthebottom.

1 Hanghook(a)ontheDINrail(A).

2 Pullandholdtheleverdown(B).

3 Securehook(b)totheDINrail(C).

Hook(a)

A

B

C

Hook(b)

Main monitor installation position

Installing the main monitor

Mainmonitorinstallationposition

82.5mm

82.7mm

2 ConnecttheDCcableandwires.

● Connect thewirescorrectlyaccording to"Wiringschematicdiagram".

3 Mountthemainmonitortothemountingbracket.

3-1 Lineupthetabonthebottomofthebracketwiththegrooveonthemainmonitor(A).3-2 Lineupthetabonthetopofthebracketwiththegrooveonthemainmonitor,and

pushthemainmonitordownuntilitissecure(B).

Wall

1 Attachthemountingbrackettothewallsecurely.

● Install themountingbracketonaverticalflatwall.

ARemovescrewAandthenremovetheterminalcover.

B LoosenscrewBandpushinthewiresoftheDCcabletotheterminalconnectors(non-polar),thentightenthescrews.● Recommendedtorque:0.8N·m{8.2kgf·cm}

CUsethecablebinder(accessory)tosecuretheDCcable(double-coatedarea)tothemainmonitor.

D Makesuretoreplacetheterminalcover.

How to connect the DC cable:

Whilepressingonthebuttonwithapoint-edobjectsuchasascrewdriver,insertthewireintotheterminalconnector.(Todisconnectawire,whilepressingonthebutton,pulloutthewire.)

Barewireattip

9mm

Terminal Button

Wiringfromdoorphone

Important:Donotconnectthepowercable.(Damagemayoccur.)

How to make wiring connections:

Resetbutton

SDcardslot

20cm

20cm

20cm

20cm

Cablebinder(accessory)

12mm

Barewireattip ScrewB

● Forthefollowingreasons,leaveatleast20cmofspaceabove,below,andtotheleftandrightsidesofthemainmonitor:- Topreventmalfunctionandsoundcuttingout- ToensureSDcardscanbeinsertedandremoved,andtomakesuretheresetbuttoncanbeused(theSDcardslotisonthesideofthemainmonitor;theresetbuttonisonthebottom)

■ About the installation position of the main monitor and mounting bracket● Placethemainmonitorinalocationthatyoureyesarethesameheightasthecentreofthedisplay.

● Afterdecidingwheretoinstallthemainmonitor,attachthemountingbracket in the locationshownon theright.

Doorphone installation position Installing the power supply unit

Imagerange:Approx.900

Approx.500

Approx.85° Approx.170°

Centre (default)

Imagerange:Approx.900

Approx.85°

Right

Imagerange:Approx.900

Approx.500

Approx.170° Approx.85°

Approx.500

Approx.850

Approx.1,450

Approx.550

32mm

When set to wide (default)

Centreofdoorphone

Centreofdoorphone

Centreofdoorphone

Approx.95°

Centreofdoorphone

Approx.1,450 Approx.500

Approx.900Approx.170°

Approx.500

Approx.1,100

Approx.2,000

Imagerange

Imagedisplayedonmainmonitor:

Viewwhenlookingfromabove

Viewwhenlookingfromabove

(Units:mm)

Notes about electrical wiringMakesurenottopinchthewires(asshowntotheright)onthemountingbracketwheninstalling.● Donotforciblyattachtothemountingbracket.

Vertical,flatwall

Screws(locallyprocured)

Holeinwall

83.560

750

Mountingbracket

(Units:mm)

(Units:mm)

(Units:mm)

(Units:mm)