Upload
garry-underwood
View
252
Download
0
Embed Size (px)
Citation preview
VistA Imaging DisplayUser Guide
DEPARTMENT OF VETERANS AFFAIRS VA LEARNING UNIVERSITY
NATIONAL TRAINING AND EDUCATION OFFICE JUNE 2008
2
VistA imaging Display
VISTA IMAGING DISPLAY
There are minor changes in this document from previous versions of the documentation. The documentation reflects changes to the software with version 3_0P59.
This document is intended to be utilized as a user guide.
See the next slide for the Table of Contents and associated hyperlinks.
The last slide has a list of Resources for your information and convenience.
3
VistA imaging Display
TABLE OF CONTENTS
• MAIN DISPLAY WINDOW
• USER PREFERENCE BUTTON
• ABSTRACT/GROUP ABSTRACT WINDOW
• IMAGE LIST WINDOW
• FULL RESOLUTION VIEW
To select a specific topic, click the corresponding link:
To view all information, press ENTER to continue.
4
VistA imaging Display
LOGON
VistA Imaging Display is used in conjunction with CPRS to provide an integrated electronic medical record.
To open VistA Imaging Display:
Logon to CPRS, select the patient, click on the Tools Menu and select the menu option for VistA Imaging Display, (sites use different terminology such VI, Display, Imaging).
5
VistA imaging Display
VISTA IMAGING DISPLAY
After selecting Imaging Display from the Tools menu in CPRS, the Main Imaging Display window, the Abstract window and the Image List window generally open by default.
6
VistA imaging Display
MAIN DISPLAY WINDOW
7
VistA imaging Display
MAIN DISPLAY WINDOW
The Main VistA Imaging Display window has menus with file drop down selections. For 508 compliance which is Federal law, the Imaging software has shortcut key combinations.
The window displays the active filter.
All sites that the patient was seen at are displayed on the screen.
The local site 3 letter code is at the bottom left of the screen.
The notebook in the far bottom left corner is for troubleshooting.
8
VistA imaging Display
MENU SELECTIONS
Because you logon to VistA Imaging Display thru CPRS, Select Patient, Login, Logout, and Remote Login are grayed out.
Under the options menu you can open the Image List Filter, View Preference and Remote Image Views Configuration window.
By default, hints are active for the Main Display window.
The Shortcut Key Legend menu is available under the Options menu.
9
VistA imaging Display
MENU SELECTIONS
Under the View menu the Active windows selection has been added. This allows you to select the Main Display, Abstract, or Image List window by selecting from a list of choices.
The Reports window has not changed.
The Help for Imaging Display interfaces to an Imaging Web Help portal.
10
VistA imaging Display
MAIN DISPLAY WINDOW BUTTONS
11
VistA imaging Display
Main Display Window Buttons
Clicking the Image List button opens the Image List window. The features of the Image List window are discussed on later slides.
12
VistA imaging Display
Main Display Window Buttons
When selected, the Abstract window button activates the Abstract window. The window displays thumbnail representations of the full size image view. Details on the Abstract window are discussed on later slides.
13
VistA imaging Display
Main Display Window Buttons
The Image Filter Add Edit button activates the Image Filter Add/Edit window. Creating Filters is discussed on later slides.
14
VistA imaging Display
Main Display Window Buttons
The Health Summary Reports Window opens the Health Summary selection window and the EKG button activates the cardiology viewing window.
15
VistA imaging Display
Main Display Window Buttons
The Patient selection button is grayed out because the patient was selected thru CPRS.
The Remote Image View Configuration button opens the Remote Image View Configuration window and provides the ability to disconnect or connect to other sites.
16
VistA imaging Display
Main Display Window Buttons
The User Preference button activates the View Preference window. The Patient Selected tab, the Abstract & Group windows tab, and the Remote Image View tab are discussed in later slides.
17
VistA imaging Display
USER PREFERENCE BUTTON
18
VistA imaging Display
User Preference-Patient Selected Tab
The User Preference button activates the View Preference window. The Patient Selected tab determines what windows open by default when VistA Imaging Display is launched.
19
VistA imaging Display
User Preference-Abstract & Group Windows Tab
The Abstract & Group windows tab controls whether or not remote abstracts are viewable in the abstract and group abstract window. (See next slide.)
20
VistA imaging Display
User Preference-Abstract & Group Windows Tab
When the Display Remote Abstracts box is checked, the Remote Abstracts are viewable. When the Display Remote Abstracts box is not checked, “Abstract is on Remote Server” is displayed.
21
VistA imaging Display
User Preference- Remote Image View Tab
The View Preference window opens when the User Preference button is selected. The tab Remote Image View controls what remote images are displayed and controls whether or not you see other patient site locations on the Imaging Display window.
22
VistA imaging Display
ABSTRACT/GROUP ABSTRACT WINDOW
23
VistA imaging Display
ABSTRACT TOOL BAR
To activate the Toolbar in the event it is not in view, right click on an abstract and select Toolbar.
When the window doesn’t display all abstracts, click the next page or previous page button to move thru the abstracts in the abstract window.
The magnify button or de-magnify button enlarges or decreases the size of the abstracts, (remember it is not the full size image so enlarging the abstract will begin to display pixels with the enlarged size).
The double arrow button is a refresh button and will refresh the Abstract window.
Right click on the Toolbar to de-select the tool bar view, or move the Toolbar to the left of the window or the top of the window.
24
VistA imaging Display
ABSTRACT WINDOW-RIGHT CLICK
Right Click on an Abstract to open the selection window. Click on Image Information. An Information window opens with information about the image.
25
VistA imaging Display
ABSTRACT WINDOW-RESIZING
Abstracts can be resized. To resize the abstracts, right click on any abstract. Click on Resize the Abstracts, on the green rectangle put the mouse cursor on the lower corner and drag. Click the Finished button. Note the same procedure is followed for the Group Abstract window. The resizing will be saved if you click on the Options menu in the Main Display window and select to Save Settings Now or on Exit.
26
VistA imaging Display
SINGLE CAPTURE & GROUP CAPTURE
Single Capture
Group Capture
A single capture has either one image capture or a multiple page black and white capture. When the abstract is clicked the capture will open in the full resolution viewer. A Group capture generally has more than one image and when the abstract is clicked a group window opens. (Notice the difference in title bar colors.)
27
VistA imaging Display
IMAGE LIST WINDOW
28
VistA imaging Display
IMAGE LIST WINDOW
If the Image List window doesn’t open by default, the Image List window can be opened by clicking the Image List window button located on the Main Display window. The Image List window has various functions that are discussed on the next slides.
29
VistA imaging Display
IMAGE LIST WINDOW
The Image List window menus are discussed on the next slide. The view on this slide displays the Image List window with image preview and report preview activated.
30
VistA imaging Display
IMAGE LIST WINDOW
This slide displays the selections for each menu item on the Image List Window. The Help menu will open an online help program for VistA Imaging.
31
VistA imaging Display
IMAGE LIST TOOL BARActive Toolbar
The next slides will discuss the toolbar buttons on the Image List window. Note on this slide the toolbar is in view. If you are a first time user of the Imaging software the toolbar will be displayed. For the toolbar to remain in view, click on the Options menu on the Main Display window and click on either Save Settings Now, or click on Save Settings on Exit.
32
VistA imaging Display
IMAGE LIST TOOL BARMissing Toolbar
When the toolbar is missing from view, click on the Options menu on the Image List window and click on Toolbar. If you do not save the setting, the toolbar will not be active the next time you view the Image List window.
33
VistA imaging Display
IMAGE LIST TOOL BUTTONSThe camera button opens the image, or opens the group abstract window. The camera preview opens a pre-view of the image as seen on this slide. The report button opens the report in a separate window and the report pre-view opens a pre-view of the report as seen on this slide.
The camera and report icon with the blue square in the corner are preview buttons.
34
VistA imaging Display
IMAGE LIST TOOL BUTTONS
The arrow buttons adjust the column headings to the window or to the text. The column selector allows the user to select what columns are displayed. The abstract button opens the abstract window.
35
VistA imaging Display
IMAGE LIST TOOL BUTTONS
The patient selection button is grayed out, (gray face) as seen on this slide because the patient was selected in CPRS. The red arrow circle refreshes the information on the screen and the question mark opens an online user help feature.
36
VistA imaging Display
IMAGE LIST- FILTERS
Filters
Filters allow you to select the images you would like to view rather than every image/document captured. Filters are created as private or public and you can create your own private filters. This slide demonstrates clicking the Image Filter button from the Image List window which opens the Image Filter Add/Edit window. Public filters have a pound (#) sign and private filters do not. Creating private filters is discussed on the next slides.
37
VistA imaging Display
IMAGE LIST- PRIVATE FILTERS
The easiest way to create a private filter is by accepting the defaults for Date Range, Image Origin, and Clinical. Then select a choice from the drop down menus for Specialty, and/or Procedure/Event, and/or Type. (See next slide.)
38
VistA imaging Display
IMAGE LIST- PRIVATE FILTERS
Determine how the image or document was captured. Click on the “Clinical All” filter tab to view all data on the Image List View window. Look at the Image List window and view the column headings for Procedure, Type, and Specialty. Decide if you want to select from one or more of those fields. It is easier to select fewer choices as it limits what will display when the filter is created. (See next slide.)
39
VistA imaging Display
IMAGE LIST – PRIVATE FILTERS
In this example, “IMAGE” is selected from the Type field. Notice that various images are represented because the type “Image” is broad and can include multiple Specialties. In this case it would be better to create the filter based on Specialty.
40
VistA imaging Display
IMAGE LIST- PRIVATE FILTERS
In this example the filter was created based on the Specialty Dermatology so only the Dermatology images appear. The filtering is specific to the particular specialty so only what is captured to the specialty appears in the Abstract and Image List window.
41
VistA imaging Display
PRIVATE FILTER CREATION
Creation of the a Private Filter starts with Date Range selection. The default is All Dates. To select a different Date Range or create a Date Range, click on the drop down arrow on the Date Range window, select a choice or click on Select Range and create your own Date Range.
42
VistA imaging Display
PRIVATE FILTER CREATIONAccept the default for Image Origin, click the appropriate box for the Origin.
Select the Specialty.
Click on Save As and type in a name for the filter. Click Save.
Click OK on the Add/Edit window.
43
VistA imaging Display
PRIVATE FILTER CREATION
The Main Display window displays the current filter, the Abstract window displays the abstract or abstracts associated with the filter, and there is a tab for the filter on the Image List window. To make the filter the default filter when VI opens, click on the Options menu in the Main Display window and either click on Save Settings Now, or check to Save Settings on Exit.
44
VistA imaging Display
FULL RESOLUTION VIEW
45
VistA imaging Display
FULL RESOLUTION VIEWThis slide demonstrates opening a capture that was saved as a single capture rather than a study. Note the clear title bar in the Abstract window. Opening a capture that was saved as single opens directly into the full resolution viewer and does not open in a group window.
46
VistA imaging Display
FULL RESOLUTION VIEW
This screen demonstrates opening a group capture. Note the black title bar. Click on the Abstract or the Image List information and the Group abstract opens. Click on an abstract and it opens in the Full Resolution viewer window.
47
VistA imaging Display
FULL RESOLUTION VIEW
This slide displays the menu selections for Full Resolution View. Tool bar buttons can also be used to manipulate the image as well as the menu choices. To determine what a button does, hover the mouse over the associated button.
48
VistA imaging Display
FULL RESOLUTION VIEWWhen the Full Resolution View opens the default layout is 1x1. The next slide demonstrates how to change the layout. Multiple images or documents can be viewed in the window at the same time. To place multiple images or documents on the window click on the abstract or group abstract until the desired number is noted on the window.
49
VistA imaging Display
FULL RESOLUTION VIEW
The Layout Menu has various configurations to arrange documents and images in the Full Resolution View window. When you select a layout that you want to be the default layout for future viewing, select the Layout and then in the Main Display window click on the Options menu and click on Save Settings now, or check Save Settings on Exit.
50
VistA imaging Display
FULL RESOLUTION VIEW
Tool button titles left to right
Apply to All
Refresh
Fit to Window
Fit to Height
Fit to Width
Actual Size
Flip Vertically
Flip Horizontally
Rotate Left
Rotate Right
Invert
Pan
Mouse Magnify
Selected Area Zoom
Open Pan Window
Maximize
Tile Images
Close Selected Image
Close All Images
51
VistA imaging Display
FULL RESOLUTION VIEW
When you have selected the number of images that you want to view, click on the Layout menu to select a different layout view if so desired.
52
VistA imaging Display
FULL RESOLUTION VIEW
After you make a Layout selection, click on a tool bar button to adjust the image in the window. In this view there are 3 images and the adjustment can be made to all 3 at the same time. (See next slide)
53
VistA imaging Display
FULL RESOLUTION VIEW
On this screen, the Layout was changed to 1x3. The Apply to All button was selected to make changes to all images, and the images were adjusted to Fit to Image Height.
54
VistA imaging Display
FULL RESOLUTION VIEW
To remove an image from view: click on the image that you want to remove from view and then click on the Close Selected Images button.
55
VistA imaging Display
FULL RESOLUTION VIEW
After the image is removed from view, you can change the Layout. If you want to remove all images from view, it is best to just exit the window by clicking on the X in the upper right corner.
56
VistA imaging Display
Additional Information Resources Related to VistA Imaging:
VistA Imaging Training Home Page:
http://vaww.VistAU.Med.VA.Gov/VI
Health Systems Design & Development Imaging System Home Page: http://vaww.va.gov/imaging
E-mail inquires can be made thru MS Outlook to the VI training team at: