VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 1 of 13

Spiral Gasket – BF

flange size flange range dD dIFR dIR dOD dIGS dIG dOG dOFR dOGS dOR

1” cl. 150 23.5 26.6 26.9 27.5 31.8 31.8 47.8 50.8 50.8 66.8 1” cl. 300 23.5 26.6 26.9 27.5 31.8 31.8 47.8 50.8 50.8 73.2 1” cl. 400-600 23.5 26.6 26.9 27.5 31.8 31.8 47.8 50.8 50.8 73.2 1” cl. 900-1500 23.5 26.6 26.9 27.5 31.8 31.8 47.8 50.8 50.8 79.5 1” cl. 2500 23.5 26.6 26.9 27.5 31.8 31.8 47.8 50.8 50.8 85.9 1.25” cl. 150 32.0 35.1 38.1 35.7 41.5 47.8 60.5 63.5 63.5 76.2 1.25” cl. 300 32.0 35.1 38.1 35.7 41.5 47.8 60.5 63.5 63.5 82.6 1.25” cl. 400-600 32.0 35.1 38.1 35.7 41.5 47.8 60.5 63.5 63.5 82.6 1.25” cl. 900-1500 32.0 35.1 33.3 35.7 39.8 39.6 60.5 63.5 63.5 88.9 1.25” cl. 2500 32.0 35.1 33.3 35.7 39.8 39.6 60.5 63.5 63.5 104.9 1.5” cl. 150 44.0 40.9 44.5 47.3 52.4 54.1 69.9 73.0 73.0 85.9 1.5” cl. 300 44.0 40.9 44.5 47.3 52.4 54.1 69.9 73.0 73.0 95.3 1.5” cl. 400-600 44.0 40.9 44.5 47.3 52.4 54.1 69.9 73.0 73.0 95.3 1.5” cl. 900-1500 32.0 40.9 41.4 35.7 41.5 47.8 69.9 73.0 73.0 98.6 1.5” cl. 2500 32.0 40.9 41.4 35.7 41.5 47.8 69.9 73.0 73.0 117.6 2” cl. 150 57.0 52.5 55.6 63.5 70.2 69.9 85.9 92.1 92.1 104.9 2” cl. 300 57.0 52.5 55.6 63.5 70.2 69.9 85.9 92.1 92.1 111.3 2” cl. 400-600 57.0 52.5 55.6 63.5 70.2 69.9 85.9 92.1 92.1 111.3 2” cl. 900-1500 44.0 52.5 52.3 47.3 55.4 58.7 85.9 92.1 92.1 143.0 2” cl. 2500 44.0 52.5 52.3 47.3 55.4 58.7 85.9 92.1 92.1 146.1 2.5” cl. 150 57.0 62.7 66.5 63.5 70.2 82.6 98.6 104.8 104.8 124.0 2.5” cl. 300 57.0 62.7 66.5 63.5 70.2 82.6 98.6 104.8 104.8 130.3 2.5” cl. 400-600 57.0 62.7 66.5 63.5 70.2 82.6 98.6 104.8 104.8 130.3 2.5” cl. 900-1500 57.0 62.7 63.5 63.5 70.2 69.9 98.6 104.8 104.8 165.1 2.5” cl. 2500 57.0 62.7 63.5 63.5 70.2 69.9 98.6 104.8 104.8 168.4 3” cl. 150 88.5 77.9 81.0 92.7 101.0 101.6 120.7 127.0 127.0 136.7 3” cl. 300 81.0 77.9 81.0 92.7 101.0 101.6 120.7 127.0 127.0 149.4 3” cl. 400-600 81.0 77.9 81.0 92.7 101.0 101.6 120.7 127.0 127.0 149.4 3” cl. 900 81.0 77.9 78.7 84.8 93.0 95.3 120.7 127.0 127.0 168.4 3” cl. 1500 81.0 77.9 78.7 84.8 93.0 92.2 120.7 127.0 127.0 174.8 3” cl. 2500 81.0 77.9 78.7 84.8 93.0 92.2 120.7 127.0 127.0 196.9 4” cl. 150 81.0 102.3 106.4 92.7 101.0 127.0 149.4 157.2 157.2 174.8 4” cl. 300 81.0 102.3 106.4 92.7 101.0 127.0 149.4 157.2 157.2 181.1 4” cl. 400 81.0 102.3 102.6 92.7 101.0 120.7 149.4 157.2 157.2 177.8 4” cl. 600 81.0 102.3 102.6 92.7 101.0 120.7 149.4 157.2 157.2 193.8 4” cl. 900 81.0 102.3 102.6 92.7 101.0 120.7 149.4 157.2 157.2 206.5 4” cl. 1500 81.0 102.3 97.8 92.7 101.0 117.6 149.4 157.2 157.2 209.6 4” cl. 2500 81.0 102.3 97.8 92.7 101.0 117.6 149.4 157.2 157.2 235.0

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 2 of 13

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 3 of 13

Spiral Gasket – US

flange size flange range dIR dIGS dIG dOG dOGS dOR

0.5” cl. 150 14.2 15.8 19.1 31.8 34.9 47.8 0.5” cl. 300 14.2 15.8 19.1 31.8 34.9 54.1 0.5” cl. 400-600 14.2 15.8 19.1 31.8 34.9 54.1 0.5” cl. 900-1500 14.2 15.8 19.1 31.8 34.9 63.5 0.5” cl. 2500 14.2 N.A. 19.1 31.8 34.9 69.9 0.75” cl. 150 20.6 21.0 25.4 39.6 42.9 57.2 0.75” cl. 300 20.6 21.0 25.4 39.6 42.9 66.8 0.75” cl. 400-600 20.6 21.0 25.4 39.6 42.9 66.8 0.75” cl. 900-1500 20.6 21.0 25.4 39.6 42.9 69.9 0.75” cl. 2500 20.6 N.A. 25.4 39.6 42.9 76.2 1” cl. 150 26.9 26.6 31.8 47.8 50.8 66.8 1” cl. 300 26.9 26.6 31.8 47.8 50.8 73.2 1” cl. 400-600 26.9 26.6 31.8 47.8 50.8 73.2 1” cl. 900-1500 26.9 26.6 31.8 47.8 50.8 79.5 1” cl. 2500 26.9 N.A. 31.8 47.8 50.8 85.9 1.25” cl. 150 38.1 35.1 47.8 60.5 63.5 76.2 1.25” cl. 300 38.1 35.1 47.8 60.5 63.5 82.6 1.25” cl. 400-600 38.1 35.1 47.8 60.5 63.5 82.6 1.25” cl. 900-1500 33.3 35.1 39.6 60.5 63.5 88.9 1.25” cl. 2500 33.3 N.A. 39.6 60.5 63.5 104.9 1.5” cl. 150 44.5 40.9 54.1 69.9 73.0 85.9 1.5” cl. 300 44.5 40.9 54.1 69.9 73.0 95.3 1.5” cl. 400-600 44.5 40.9 54.1 69.9 73.0 95.3 1.5” cl. 900-1500 41.4 40.9 47.8 69.9 73.0 98.6 1.5” cl. 2500 41.4 N.A. 47.8 69.9 73.0 117.6 2” cl. 150 55.6 47.0 69.9 85.9 92.1 104.9 2” cl. 300 55.6 47.0 69.9 85.9 92.1 111.3 2” cl. 400-600 55.6 47.0 69.9 85.9 92.1 111.3 2” cl. 900-1500 52.3 47.0 58.7 85.9 92.1 143.0 2” cl. 2500 52.3 N.A. 58.7 85.9 92.1 146.1 2.5” cl. 150 66.5 47.0 82.6 98.6 104.8 124.0 2.5” cl. 300 66.5 47.0 82.6 98.6 104.8 130.3 2.5” cl. 400-600 66.5 47.0 82.6 98.6 104.8 130.3 2.5” cl. 900-1500 63.5 47.0 69.9 98.6 104.8 165.1 2.5” cl. 2500 63.5 N.A. 69.9 98.6 104.8 168.4 3” cl. 150 81.0 47.0 101.6 120.7 127.0 136.7 3” cl. 300 81.0 47.0 101.6 120.7 127.0 149.4 3” cl. 400-600 81.0 47.0 101.6 120.7 127.0 149.4 3” cl. 900 78.7 47.0 95.3 120.7 127.0 168.4 3” cl. 1500 78.7 47.0 92.2 120.7 127.0 174.8 3” cl.2500 78.7 N.A. 92.2 120.7 127.0 196.9 4” cl. 150 106.4 47.0 127.0 149.4 157.2 174.8 4” cl. 300 106.4 47.0 127.0 149.4 157.2 181.1 4” cl. 400 102.6 47.0 120.7 149.4 157.2 177.8 4” cl. 600 102.6 47.0 120.7 149.4 157.2 193.8 4” cl. 900 102.6 47.0 120.7 149.4 157.2 206.5 4” cl. 1500 97.8 47.0 117.6 149.4 157.2 209.6 4” cl. 2500 97.8 N.A. 117.6 149.4 157.2 235.0

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 4 of 13

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 5 of 13

Spiral Gasket – USL

flange size flange range dIR dIGS dIG dOG dOGS dOR

0.5” cl. 150 14.2 15.8 19.1 31.8 34.9 47.8 0.5” cl. 300 14.2 15.8 19.1 31.8 34.9 54.1 0.5” cl. 400-600 14.2 15.8 19.1 31.8 34.9 54.1 0.5” cl. 900-1500 14.2 N.A. 19.1 31.8 34.9 63.5 0.5” cl. 2500 14.2 N.A. 19.1 31.8 34.9 69.9 0.75” cl. 150 20.6 21.0 25.4 39.6 42.9 57.2 0.75” cl. 300 20.6 21.0 25.4 39.6 42.9 66.8 0.75” cl. 400-600 20.6 21.0 25.4 39.6 42.9 66.8 0.75” cl. 900-1500 20.6 N.A. 25.4 39.6 42.9 69.9 0.75” cl. 2500 20.6 N.A. 25.4 39.6 42.9 76.2 1” cl. 150 26.9 26.6 31.8 47.8 50.8 66.8 1” cl. 300 26.9 26.6 31.8 47.8 50.8 73.2 1” cl. 400-600 26.9 26.6 31.8 47.8 50.8 73.2 1” cl. 900-1500 26.9 N.A. 31.8 47.8 50.8 79.5 1” cl. 2500 26.9 N.A. 31.8 47.8 50.8 85.9 1.25” cl. 150 38.1 35.1 47.8 60.5 63.5 76.2 1.25” cl. 300 38.1 35.1 47.8 60.5 63.5 82.6 1.25” cl. 400-600 38.1 35.1 47.8 60.5 63.5 82.6 1.25” cl. 900-1500 33.3 N.A. 39.6 60.5 63.5 88.9 1.25” cl. 2500 33.3 N.A. 39.6 60.5 63.5 104.9 1.5” cl. 150 44.5 40.9 54.1 69.9 73.0 85.9 1.5” cl. 300 44.5 40.9 54.1 69.9 73.0 95.3 1.5” cl. 400-600 44.5 40.9 54.1 69.9 73.0 95.3 1.5” cl. 900-1500 41.4 N.A. 47.8 69.9 73.0 98.6 1.5” cl. 2500 41.4 N.A. 47.8 69.9 73.0 117.6 2” cl. 150 55.6 52.5 69.9 85.9 92.1 104.9 2” cl. 300 55.6 52.5 69.9 85.9 92.1 111.3 2” cl. 400-600 55.6 52.5 69.9 85.9 92.1 111.3 2” cl. 900-1500 52.3 N.A. 58.7 85.9 92.1 143.0 2” cl. 2500 52.3 N.A. 58.7 85.9 92.1 146.1 2.5” cl. 150 66.5 62.7 82.6 98.6 104.8 124.0 2.5” cl. 300 66.5 62.7 82.6 98.6 104.8 130.3 2.5” cl. 400-600 66.5 62.7 82.6 98.6 104.8 130.3 2.5” cl. 900-1500 63.5 N.A. 69.9 98.6 104.8 165.1 2.5” cl. 2500 63.5 N.A. 69.9 98.6 104.8 168.4 3” cl. 150 81.0 81.0 101.6 120.7 127.0 136.7 3” cl. 300 81.0 81.0 101.6 120.7 127.0 149.4 3” cl. 400-600 81.0 81.0 101.6 120.7 127.0 149.4 3” cl. 900 78.7 N.A. 95.3 120.7 127.0 168.4 3” cl. 1500 78.7 81.0 92.2 120.7 127.0 174.8 3” cl.2500 78.7 N.A. 92.2 120.7 127.0 196.9 4” cl. 150 106.4 81.0 127.0 149.4 157.2 174.8 4” cl. 300 106.4 81.0 127.0 149.4 157.2 181.1 4” cl. 400 102.6 81.0 120.7 149.4 157.2 177.8 4” cl. 600 102.6 81.0 120.7 149.4 157.2 193.8 4” cl. 900 102.6 N.A. 120.7 149.4 157.2 206.5 4” cl. 1500 97.8 81.0 117.6 149.4 157.2 209.6 4” cl. 2500 97.8 N.A. 117.6 149.4 157.2 235.0

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 6 of 13

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 7 of 13

Grooved Gasket – BF

flange size flange range dD dIFR dOD dIGS dIG dOG dOFR dOGS dOR

1” cl. 150 23.5 26.6 27.5 31.8 32.0 47.8 50.8 50.8 66.8 1” cl. 300 23.5 26.6 27.5 31.8 32.0 47.8 50.8 50.8 73.2 1” cl. 400-600 23.5 26.6 27.5 31.8 32.0 47.8 50.8 50.8 73.2 1” cl. 900-1500 23.5 26.6 27.5 31.8 32.0 47.8 50.8 50.8 79.5 1” cl. 2500 23.5 26.6 27.5 31.8 32.0 47.8 50.8 50.8 85.9 1.25” cl. 150 32.0 35.1 35.7 41.5 40.0 60.5 63.5 63.5 76.2 1.25” cl. 300 32.0 35.1 35.7 41.5 40.0 60.5 63.5 63.5 82.6 1.25” cl. 400-600 32.0 35.1 35.7 41.5 40.0 60.5 63.5 63.5 82.6 1.25” cl. 900-1500 32.0 35.1 35.7 39.8 40.0 60.5 63.5 63.5 88.9 1.25” cl. 2500 32.0 35.1 35.7 39.8 40.0 60.5 63.5 63.5 104.9 1.5” cl. 150 44.0 40.9 47.3 52.4 45.0 69.9 73.0 73.0 85.9 1.5” cl. 300 44.0 40.9 47.3 52.4 45.0 69.9 73.0 73.0 95.3 1.5” cl. 400-600 44.0 40.9 47.3 52.4 45.0 69.9 73.0 73.0 95.3 1.5” cl. 900-1500 32.0 40.9 35.7 41.5 45.0 69.9 73.0 73.0 98.6 1.5” cl. 2500 32.0 40.9 35.7 41.5 45.0 69.9 73.0 73.0 117.6 2” cl. 150 57.0 52.5 63.5 70.2 60.0 85.9 92.1 92.1 104.9 2” cl. 300 57.0 52.5 63.5 70.2 60.0 85.9 92.1 92.1 111.3 2” cl. 400-600 57.0 52.5 63.5 70.2 60.0 85.9 92.1 92.1 111.3 2” cl. 900-1500 44.0 52.5 47.3 55.4 60.0 85.9 92.1 92.1 143.0 2” cl. 2500 44.0 52.5 47.3 55.4 60.0 85.9 92.1 92.1 146.1 2.5” cl. 150 57.0 62.7 63.5 70.2 70.0 98.6 104.8 104.8 124.0 2.5” cl. 300 57.0 62.7 63.5 70.2 70.0 98.6 104.8 104.8 130.3 2.5” cl. 400-600 57.0 62.7 63.5 70.2 70.0 98.6 104.8 104.8 130.3 2.5” cl. 900-1500 57.0 62.7 63.5 70.2 70.0 98.6 104.8 104.8 165.1 2.5” cl. 2500 57.0 62.7 63.5 70.2 70.0 98.6 104.8 104.8 168.4 3” cl. 150 88.5 77.9 92.7 101.0 85.0 120.7 127.0 127.0 136.7 3” cl. 300 81.0 77.9 92.7 101.0 85.0 120.7 127.0 127.0 149.4 3” cl. 400-600 81.0 77.9 92.7 101.0 85.0 120.7 127.0 127.0 149.4 3” cl. 900 81.0 77.9 84.8 93.0 85.0 120.7 127.0 127.0 168.4 3” cl. 1500 81.0 77.9 84.8 93.0 85.0 120.7 127.0 127.0 174.8 3” cl. 2500 81.0 77.9 84.8 93.0 85.0 120.7 127.0 127.0 196.9 4” cl. 150 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 174.8 4” cl. 300 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 181.1 4” cl. 400 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 177.8 4” cl. 600 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 193.8 4” cl. 900 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 206.5 4” cl. 1500 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 209.6 4” cl. 2500 81.0 102.3 92.7 101.0 100.0 149.4 157.2 157.2 235.0

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 8 of 13

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 9 of 13

Grooved Gasket – US

flange size flange range dIGS dIG dOG dOGS dOR

0.5” cl. 150 15.8 20.0 31.8 34.9 47.8 0.5” cl. 300 15.8 20.0 31.8 34.9 54.1 0.5” cl. 400-600 15.8 20.0 31.8 34.9 54.1 0.5” cl. 900-1500 15.8 20.0 31.8 34.9 63.5 0.5” cl. 2500 N.A. 20.0 31.8 34.9 69.9 0.75” cl. 150 21.0 25.0 39.6 42.9 57.2 0.75” cl. 300 21.0 25.0 39.6 42.9 66.8 0.75” cl. 400-600 21.0 25.0 39.6 42.9 66.8 0.75” cl. 900-1500 21.0 25.0 39.6 42.9 69.9 0.75” cl. 2500 N.A. 25.0 39.6 42.9 76.2 1” cl. 150 26.6 32.0 47.8 50.8 66.8 1” cl. 300 26.6 32.0 47.8 50.8 73.2 1” cl. 400-600 26.6 32.0 47.8 50.8 73.2 1” cl. 900-1500 26.6 32.0 47.8 50.8 79.5 1” cl. 2500 N.A. 32.0 47.8 50.8 85.9 1.25” cl. 150 35.1 40.0 60.5 63.5 76.2 1.25” cl. 300 35.1 40.0 60.5 63.5 82.6 1.25” cl. 400-600 35.1 40.0 60.5 63.5 82.6 1.25” cl. 900-1500 35.1 40.0 60.5 63.5 88.9 1.25” cl. 2500 N.A. 40.0 60.5 63.5 104.9 1.5” cl. 150 40.9 45.0 69.9 73.0 85.9 1.5” cl. 300 40.9 45.0 69.9 73.0 95.3 1.5” cl. 400-600 40.9 45.0 69.9 73.0 95.3 1.5” cl. 900-1500 40.9 45.0 69.9 73.0 98.6 1.5” cl. 2500 N.A. 45.0 69.9 73.0 117.6 2” cl. 150 47.0 60.0 85.9 92.1 104.9 2” cl. 300 47.0 60.0 85.9 92.1 111.3 2” cl. 400-600 47.0 60.0 85.9 92.1 111.3 2” cl. 900-1500 47.0 60.0 85.9 92.1 143.0 2” cl. 2500 N.A. 60.0 85.9 92.1 146.1 2.5” cl. 150 47.0 70.0 98.6 104.8 124.0 2.5” cl. 300 47.0 70.0 98.6 104.8 130.3 2.5” cl. 400-600 47.0 70.0 98.6 104.8 130.3 2.5” cl. 900-1500 47.0 70.0 98.6 104.8 165.1 2.5” cl. 2500 N.A. 70.0 98.6 104.8 168.4 3” cl. 150 47.0 85.0 120.7 127.0 136.7 3” cl. 300 47.0 85.0 120.7 127.0 149.4 3” cl. 400-600 47.0 85.0 120.7 127.0 149.4 3” cl. 900 47.0 85.0 120.7 127.0 168.4 3” cl. 1500 47.0 85.0 120.7 127.0 174.8 3” cl.2500 N.A. 85.0 120.7 127.0 196.9 4” cl. 150 47.0 100.0 149.4 157.2 174.8 4” cl. 300 47.0 100.0 149.4 157.2 181.1 4” cl. 400 47.0 100.0 149.4 157.2 177.8 4” cl. 600 47.0 100.0 149.4 157.2 193.8 4” cl. 900 47.0 100.0 149.4 157.2 206.5 4” cl. 1500 47.0 100.0 149.4 157.2 209.6 4” cl. 2500 N.A. 100.0 149.4 157.2 235.0

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 10 of 13

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 11 of 13

Grooved Gasket – USL

flange size flange range dIGS dIG dOG dOGS dOR

0.5” cl. 150 15.8 20.0 31.8 34.9 47.8 0.5” cl. 300 15.8 20.0 31.8 34.9 54.1 0.5” cl. 400-600 15.8 20.0 31.8 34.9 54.1 0.5” cl. 900-1500 N.A. 20.0 31.8 34.9 63.5 0.5” cl. 2500 N.A. 20.0 31.8 34.9 69.9 0.75” cl. 150 21.0 25.0 39.6 42.9 57.2 0.75” cl. 300 21.0 25.0 39.6 42.9 66.8 0.75” cl. 400-600 21.0 25.0 39.6 42.9 66.8 0.75” cl. 900-1500 N.A. 25.0 39.6 42.9 69.9 0.75” cl. 2500 N.A. 25.0 39.6 42.9 76.2 1” cl. 150 26.6 32.0 47.8 50.8 66.8 1” cl. 300 26.6 32.0 47.8 50.8 73.2 1” cl. 400-600 26.6 32.0 47.8 50.8 73.2 1” cl. 900-1500 N.A. 32.0 47.8 50.8 79.5 1” cl. 2500 N.A. 32.0 47.8 50.8 85.9 1.25” cl. 150 35.1 40.0 60.5 63.5 76.2 1.25” cl. 300 35.1 40.0 60.5 63.5 82.6 1.25” cl. 400-600 35.1 40.0 60.5 63.5 82.6 1.25” cl. 900-1500 N.A. 40.0 60.5 63.5 88.9 1.25” cl. 2500 N.A. 40.0 60.5 63.5 104.9 1.5” cl. 150 40.9 45.0 69.9 73.0 85.9 1.5” cl. 300 40.9 45.0 69.9 73.0 95.3 1.5” cl. 400-600 40.9 45.0 69.9 73.0 95.3 1.5” cl. 900-1500 N.A. 45.0 69.9 73.0 98.6 1.5” cl. 2500 N.A. 45.0 69.9 73.0 117.6 2” cl. 150 52.5 60.0 85.9 92.1 104.9 2” cl. 300 52.5 60.0 85.9 92.1 111.3 2” cl. 400-600 52.5 60.0 85.9 92.1 111.3 2” cl. 900-1500 N.A. 60.0 85.9 92.1 143.0 2” cl. 2500 N.A. 60.0 85.9 92.1 146.1 2.5” cl. 150 62.7 70.0 98.6 104.8 124.0 2.5” cl. 300 62.7 70.0 98.6 104.8 130.3 2.5” cl. 400-600 62.7 70.0 98.6 104.8 130.3 2.5” cl. 900-1500 N.A. 70.0 98.6 104.8 165.1 2.5” cl. 2500 N.A. 70.0 98.6 104.8 168.4 3” cl. 150 81.0 85.0 120.7 127.0 136.7 3” cl. 300 81.0 85.0 120.7 127.0 149.4 3” cl. 400-600 81.0 85.0 120.7 127.0 149.4 3” cl. 900 N.A. 85.0 120.7 127.0 168.4 3” cl. 1500 81.0 85.0 120.7 127.0 174.8 3” cl.2500 N.A. 85.0 120.7 127.0 196.9 4” cl. 150 81.0 100.0 149.4 157.2 174.8 4” cl. 300 81.0 100.0 149.4 157.2 181.1 4” cl. 400 81.0 100.0 149.4 157.2 177.8 4” cl. 600 81.0 100.0 149.4 157.2 193.8 4” cl. 900 N.A. 100.0 149.4 157.2 206.5 4” cl. 1500 81.0 100.0 149.4 157.2 209.6 4” cl. 2500 N.A. 100.0 149.4 157.2 235.0

VII – ADDENDA GASKET DIMENSIONS ASME B16.20

page 12 of 13

Holland – United Kingdom – Romania – India – Thailand – Dubai – USA

To our knowledge, the information contained herein is accurate as of the date of this document. However neither Badotherm, nor its affiliates makes any warranty, express or limited, or accepts any liability in connection with this information or its use. This information is for technical skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other product. The user alone finally determines suitability of any information or material in contemplated use, the manner of use and whether any patents are infringed. This information gives typical properties only.

Badotherm reserves the right to make changes to the specifications and materials without prior notice. The latest version of the datasheet can be found on www.badotherm.com. © 2001 Badotherm, all rights reserved. Trademarks and/or other products referenced herein are either trademarks or registered trademarks of Badotherm.

modified 20-04-2018 page 13 of 13