Upload
others
View
31
Download
0
Embed Size (px)
Citation preview
®
Delivering the Right Results
Supplies for Inorganic Analysis
i www.leco.com To order, call toll free: 1-800-292-6141
Mobile LaboratoriesLECO Corporation's unique mobile laboratories travelthroughout North America, bringing the latestinnovations in analytical instrumentation to yourneighborhood. Take the opportunity to view our productsin use as well as discuss everything from methods tomaintenance with knowledgeable technicians.LECO
The fleet includes four specially designed mobileLECOlaboratories for organic, materials characterization,metallographic, and spectrographic analyses. To find outmore about 's Mobile Laboratories or to obtain theLECOlatest schedule, call 269-983-5531, 800-292-6141(U.S. only), or log onto www.leco.com.
In 1936, the Laboratory Equipment Company introduced the first rapid carbon determinator to the Americaniron and steel industry. Today, over 80 years later, is recognized globally as a leader in the developmentLECOof high-quality analytical instrumentation, mass spectrometers, chromatographs, metallography and opticalequipment, and consumables.
Located in St. Joseph, Michigan—just 90 miles from both Chicago and Grand Rapids, Michigan— 'sLECOheadquarters is comprised of a multi-building campus. Each building contributes to a unique area of thecompany's success. At our state-of-the-art research and development center, teams of engineers worktogether to create and test ideas that will be incorporated into the next generation of instruments. Verticallyintegrated manufacturing capabilities allow quality to drive production—from stamped metal parts to complexelectronic assemblies, most components are produced in-house, allowing strict control over the entiremanufacturing and assembly process in accordance with the quality standards of -9001. Our GlobalISOSupport Center provides service and support after the sale of your instrument, as well as customer training
courses and the only fleet of mobile laboratories inNorth America featuring a hands-on experience withLECO products and specialists. A global network ofsales and support professionals, along with testingCEperformed at an on-site compliance testing center, helpstrengthen a commitment to worldwide excellence.
Whether it is a diverse array of analyticalinstrumentation, a new way to look at gas and liquidchromatography, rugged metallography products, ordedicated service support after the sale, stands byLECOa commitment to deliver the right results.
LECO Corporation
Table Of Contents
Ordering Information/General Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Information for Elemental Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Combustion/Fusion Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Crucibles and Electrode Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Tube Furnaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Combustion/Reaction Tubes and Glassware. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Primary Standards and Calibration Samples . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16
Evacuated Samplers and Pin Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Miscellaneous Operating Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-20
Upgrades and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
Conversion Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24
Spectroscopy Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Preventive Maintenance Agreements/Application Notes . . . . . . . . . . . . . . . . . . . . 26
Remote Diagnostics/Cornerstone Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To order, call toll free: 1-800-292-6141 www.leco.com ii
Support MaterialsA variety of support materials are available to LECOcustomers. Reference Cards offer exploded views of
individual instruments, indicating precise locations ofspare parts, necessary part numbers, and descriptions of
consumable products. Material Safety Data Sheets( ) are also available for a variety of chemicalMSDS
products offered through . These materialsLECOmay be obtained by contacting your salesLECO
representative, or by downloading the latestversion from our website, www.leco.com
To get the best results from your instrument, use only genuine consumables!LECO
Ordering Information/General Terms
1 www.leco.com To order, call toll free: 1-800-292-6141
VISA, Mastercard, and American Express Accepted.
Terms and Conditions• Terms: Net 30 days with approved credit.
• Prices shown are U.S. dollars, F.O.B. St. Joseph, Michigan.Freight charges are prepaid and added to the invoice.
• Sales taxes will be added where applicable.
• Returns must be approved in advance; re-stocking fee may beapplied. Return Material Authorization ( ) is required for all returns.RMAContact for information.LECO RMA
• Disclaimer: products are intended for use by professional laboratoryLECOpersonnel who are familiar with the handling of these materials. Ourproducts are not for use in household, drug, medical, or cosmeticapplications. The buyer and/or user assumes full responsibility for thesafe handling, storage, application, and proper disposal of all productsordered from this catalog.
• Complete and are included with quotations and invoices.TERMS CONDITIONS
• Prices, part numbers, and availability are subject to changewithout notice.
Ordering, Customer Assistance, and all Other Inquiries
800-292-6141 or269-985-5496
LECO Corporation3000 Lakeview AvenueSt. Joseph, 49085MI
[email protected] Purchase Orders orpricing information
[email protected] general inquiries
269-982-8977
Phone
Fax
*Only available in the .USA
On-Line Ordering Now Available!
• To receive your free username and password, call 800-292-6141
• Visit www.lecodirect.com
To order, call toll free: 1-800-292-6141 www.leco.com 2
Information for Elemental Analysis
LECO Corporation is the world leader in elemental determinators for various inorganicapplications. Carbon, Hydrogen, Nitrogen, Sulfur, Oxygen, and Moisture may bedetermined in various types of samples including metals, alloys, ores, and other inorganicmaterials. also offers instrumentation for organic matrices, time-of-flight massLECOspectrometers, optical microscopes, image analysis, and metallographic supplies.
LECO's determinators are designed with specific capabilities to match the requirements ofour customers and their respective industries. Many of the requirements that have beenestablished include precision/accuracy, sample size, instrument range, andhardware/software robustness. In order to obtain the highest level of performance, werecommend that our customers define the following parameters prior to operatingour instruments.
Desired Precision and Accuracy for your ApplicationThis is typically based on standards and a realistic sample size. Appropriate sample size isdetermined by proven method requirements, level of robustness, and desired samplepreparation. Standards are determined by availability and the level of certification requiredfor your laboratory. For examples, please refer to such organizations as and , orASTM ISOrefer to one of the Application Notes (page 26).LECO
Desired Sample PreparationThe level of sample preparation is directly correlated to the type of sample being analyzed.Some inorganic products may be analyzed as-is, directly from the industrial process.However, due to the nature of a majority of inorganic matrices, it may be required toabrade, etch, or clean the sample prior to its addition to a crucible or boat. Additionally,different materials may require different reagents, accelerators, or fluxes. Please refer topage 3 for more information regarding 's combustion/fusion supplies.LECO
Desired Level of Maintenance Commitment or Level of RobustnessThe amount of preventive maintenance performed on any elemental determinator isrelative to the instrument's ability to handle the amount and type of sample that isanalyzed. We have designed our instruments to maximize the level of robustness based onthe lowest amount of involvement by the operator; however, there are several measuresthat can be taken to maximize the longevity of the instrument; mainly, routinemaintenance, appropriate sample size, and the use of proper consumables for eachapplication. Refer to page 26 for more information on 's Preventive MaintenanceLECOAgreements ( s).PMA
At Corporation, we have several trained Application Scientists that are available toLECOhelp guide you through any question you may have. Please feel free to contact ourscientists at 800-292-6141.
Part No. Description Contents
501-171-HAZ Anhydrone - for H O absorption2 1 lb (454 g)
764-098 Cellulose - Traps SO3 1 lb (454 g) pkg
502-190 Copper Oxide Wire - for converting to and H to H O on 600 SeriesCO CO TCH2 2 2 100 g
502-705 Copper Sticks - for removal of O from inert carrier gas 100 g ampule
502-878 Copper Sticks - for removal of O from inert carrier gas 100 g
501-641 Copper Metal 1 lb (454 g)
502-656 Copper Turnings 60 g
502-177 Fine Quartz Wool 50 g
502-156 Fluorhib 1 lb (454 g)
502-493 Fluorhib HP 35 g
763-265 Glass Wool - packing material for reagent tubes 0.5 lb (227 g)
501-081 Glass Wool - packing material for reagent tubes 1 lb (454 g) box
501-073 Graphite Powder 100 g
502-351 Halogen Scrubber 50 g
502-136-HAZ Metal Trap Antimony 2 lb (908 g)
769-608-HAZ Metal Trap Antimony 200 g
769-610 Halogen Trap Reagent 225 g
502-176-HAZ Lecosorb (8/20 Mesh) - for removalCO2 500 g
502-174-HAZ Lecosorb (20/30 Mesh) - for removalCO2 500 g
501-060 Manganese Dioxide - scrubberSO2 60 g
501-587 Platinum/Silica - for converting to in combustion analysisCO CO2 15 g
767-385 Quartz Wool 1 oz 28 g
501-608 Quartz Wool 200 g
501-170 Rare Earth Copper Oxide - for converting to and H to H OCO CO2 2 2 50 g
761-747-HAZ Schutze™ Reagent - for converting toCO CO2 100 g
502-480-HAZ Schutze™ Reagent - for converting toCO CO2 500 g
General Combustion/Fusion Supplies
Reagents
3 www.leco.com To order, call toll free: 1-800-292-6141
Accelerators/Fluxes
Part No. Description Contents
501-264 Copper Chip Accelerator (-20 +30 mesh) 0.5 lb (227 g)
501-263 Copper Chip Accelerator (-20 +30 mesh) 3 lb (1.36 kg)
501-640 Copper Chip Accelerator (-20 +30 mesh) 20 lb (9 kg)
550-184 Copper Ring Accelerator 1 g ea. (1000/bottle)
502-492 HP Copper Accelerator 0.44 lb (200 g)
501-457 Tin Coated Copper Accelerator 3 lb (1.36 kg)
501-077 Iron Chip - standard grade (-6 +20 mesh) 2 lb (0.9 kg)
763-467 Iron Chip - standard grade (-6 +20 mesh) 25 lb (11.35 kg)
501-078 Iron Powder - low S 1 lb (0.45 kg)
502-231 HP Iron Chip - high purity (-6 +20 mesh) 1 lb (0.45 kg)
763-266 LECOCEL - tungsten (-20 +40 mesh) 5 lb (2.27 kg)
763-026 LECOCEL - tungsten (-20 +40 mesh) 30 lb (13.6 kg)
502-860 LECOCEL W - tungsten (-20 +40 mesh) 5 lb (2.27 kg)
502-861 LECOCEL W - tungsten (-20 +40 mesh) 30 lb (13.6 kg)
501-008 LECOCEL II - tungsten/tin, standard grade 5 lb (2.27 kg)
502-297 LECOCEL II - tungsten/tin, standard grade 30 lb (13.6 kg)
502-173 LECOCEL II HP - tungsten/tin, high purity 1.7 lb (0.75 kg)
763-263 LECOCEL III - tungsten (-12 +20 mesh) 5 lb (2.27 kg)
763-027 LECOCEL III - tungsten (-12 +20 mesh) 30 lb (13.6 kg)
502-857 LECOCEL III W - tungsten (-12 +20 mesh) 5 lb (2.27 kg)
502-858 LECOCEL III W - tungsten (-12 +20 mesh) 30 lb (13.6 kg)
501-598 Nibbled Nickel Flux 100 g bottle
502-344 Ultra High Purity Nickel Basket 1 g ea. (100/bottle)
502-345 Ultra High Purity Nickel Basket 1.5 g ea. (100/bottle)
502-822 Nickel Capsule - for under 100 mg of refractory materials 100/bottle
502-040 Tin Capsules - Large 100/bottle
502-040-100 Tin Capsules - Large 1000/bottle
501-059 Tin Capsules - Small 100/bottle
501-076 Tin Metal Accelerator (-20 +30 mesh) 2 lb (0.9 kg)
761-739 Tin Flux - for N/O/H determinations (0.5 g pellets) 1 lb (454 g)
764-242 Tin Flux - for N/O/H determinations (0.2 g pellets) 1 lb (454 g)
762-695 Tin Metal Accelerator (-20 +30 mesh) 25 lb (11.35 kg)
501-636-HAZ Vanadium Pentoxide 254 g
To order, call toll free: 1-800-292-6141 www.leco.com 4
General Combustion/Fusion Supplies
Crucibles and Electrode Tips
5 www.leco.com To order, call toll free: 1-800-292-6141
Inert Gas Fusion Crucibles for Oxygen, Nitrogen, and Hydrogen Determination736 Series, 836 Series, 400/500/600 Series, 602RHEN
Graphite Crucibles
Part No. Description Contents
619-895 High Temperature Crucibles for EN Systems 1000/pkg
764-330 Standard Crucibles for EN Systems 1000/pkg
775-433 Outer Crucibles for Standard Systems 50/pkg
775-892 Inner Crucibles for Standard Systems; Qty 100 100/pkg
775-431 Inner Crucibles for Standard Systems; Qty 1000 1000/pkg
776-000S High Temperature Flat Bottom Crucibles for Standard Systems 1000/pkg
776-247-100 Standard Crucibles for Standard Systems; Qty 100 100/pkg
776-247 Standard Crucibles for Standard Systems; Qty 1000 1000/pkg
782-795HD High Density Inner Crucibles for Standard Systems 1000/pkg
782-703-100 Large Outer Crucibles for Standard Systems; Qty 100 100/pkg
782-703 Large Outer Crucibles for Standard Systems; Qty 1000 1000/pkg
782-720-100 High Temperature Crucibles for Standard Systems; Qty 100 100/pkg
782-720 High Temperature Crucibles for Standard Systems; Qty 1000 1000/pkg
782-720SHD Large High Density High Temperature Crucibles for Standard Systems 1000/pkg
782-720S Large High Temperatue Crucibles for Standard Systems 1000/pkg
Lower Electrode Tips
Part No. Description Contents
619-896 Lower Electrode Tip - 619-895 crucibles with and without automation 1/pkg
611-351-183 Lower Electrode Tip - 764-330 crucibles without automation 1/pkg
611-351-180 Lower Electrode Tip - 764-330 crucibles with automation 1/pkg
625-710-207 Lower Electrode Tip - 776-000S crucibles without automation 1/pkg
611-351-182 Lower Electrode Tip - 776-247, 775-433, and 782-703 crucibles without automation 1/pkg
611-351-181 Lower Electrode Tip - 776-247 crucibles with automation 1/pkg
782-721 Lower Electrode Tip - 782-720 crucibles without automation 1/pkg
618-376 Lower Electrode Tip - 782-720 crucibles with automation 1/pkg
To order, call toll free: 1-800-292-6141 www.leco.com 6
Crucibles and Electrode Tips
782-795HD782-703
782-703-100
782-720-100
782-720
782-720S
782-720SHD
775-431
775-892
776-247-100
776-247775-433
619-895764-330
611-351-180 782-721
611-351-181 611-351-182
611-351-183619-896 618-376625-710-207
776-000S
Crucibles and Electrode Tips
7 www.leco.com To order, call toll free: 1-800-292-6141
RC612Part No. Description Contents
625-505-430 Nickel Boat 50/box
781-335 Quartz Boat 1/pkg
782-059 Nickel Liner 10/pkg
All Carbon and Sulfur Determinators:LECO/ 230, 600 Series, 744 Series, 844 SeriesCS WC CS
Part No. Description Contents
528-050 Ceramic Crucible - for typical carbon/sulfur analyses (same as 528-018, but in bags) 10 bags; 50 each
528-018 Ceramic Crucible - for typical carbon/sulfur analyses 1000/pkg
528-018HP Ceramic Crucible - Low Sulfur blank 1000/pkg
528-028 Standard Filtering Crucible - can be used with autoloadersLECO 100/box
528-028-500 Standard Filtering Crucible - can be used with autoloadersLECO 500/box
528-030 Filtering Crucible - for graphitic carbon determinations (not designed for automation) 100/box
528-038 Ceramic Crucible - heavy duty for extended burn time ( -12/ -112 Series)WR WR 1000/pkg
528-040Crucible Cover - with 4 mm hole, for use with 528-018 and 528-038 Crucibles
(not designed for automation)1000/box
528-042 Porous Crucible Cover - for use with 528-018 and 528-038 Crucibles for S titrators 1000/box
529-036 Crucible Liner - for use with 528-018 Crucibles (special applications) 10/pkg
619-880 Crucible Cover - with 10 mm hole, for use with 528-018 and 528-038 Crucibles 1000/box
619-880-100 Crucible Cover - with 10 mm hole, for use with 528-018 and 528-038 Crucibles 100/pkg
619-880
619-880-100(for automation)
625-505-430 781-335 782-059
528-018/528-018HP
528-050
528-028
528-028-500
528-030
528-040(not for
automation)
528-042
529-036
To order, call toll free: 1-800-292-6141 www.leco.com 8
Tube Furnaces
TF4 Tube Furnace
The LECO TF4 Quad Tube Furnace is a versatile, energy-efficient resistance furnace designed for burningoff crucibles in order to eliminate deviation caused by hydrocarbons or other contaminants released froma fresh crucible during analysis. Pre-burning crucibles is recommended prior to analysis in order tominimize blank levels and is required for ASTM compliance.
Baked Not Baked | Not Touched Not Baked | Touched
Analysis # C ppm S ppm C ppm S ppm C ppm S ppm
1 4.6 2.5 13.5 3.1 40.1 3.9
2 4.6 2.0 12.3 3.8 24.4 3.7
3 4.8 1.8 11.5 3.2 24.6 3.5
4 4.9 1.5 12.5 3.2 22.9 3.8
5 5.8 2.7 12.8 3.8 34.4 3.3
6 4.8 2.5 12.6 3.8 22.8 4.4
7 4.5 2.2 11.6 4.1 41.5 3.8
8 3.6 1.5 18.5 2.3 21.6 3.7
9 6.0 2.0 12.0 3.9 32.5 4.2
10 6.0 1.6 16.0 4.2 31.4 4.3
Average (ppm) 5.0 2.0 13.3 3.5 29.6 3.9
Std Dev 0.75 0.45 2.20 0.59 7.40 0.34
Table 1: Crucible Blank Level Comparison
TF1Part No. Description
614-470 Choke 30 Amp 1 MHz
190-009 Thumbscrew (TF1 only)
601-629 Retaining Ring (TF1 only)
528-314 Combustion Tube
601-012 O-Ring (combustion tube)
601-013 Heating Element
601-014 Heating Element Clamp
601-015 Braided Cable (Terminal to Element)
601-016 Braided Cable (Element to Element)
777-073 Thermocouple
777-242F Furnace Control Card
781-165-110 Solid State Relay
TF4
Part No. Description
529-046 Combustion Tube
626-001-377 Heating Element Assembly
*Items may be purchased individually
TF10Part No. Description
614-470 Choke 30 Amp 1 MHz
528-314 Combustion Tube
601-018 Insulation Strip
777-073 Thermocouple
777-295D Furnace Control Card
783-177 Heating Element
781-165-110 Solid State Relay
TF10 Spare Parts Kit* 616-687 includes:(2) 528-314 Combustion Tube(4) 601-018 Insulation Strip(1) 777-073 Thermocouple(1) 777-295D Furnace Control Card(6) 783-177 Heating Element(1) 781-165-110 Solid State Relay
Combustion/Reaction Tubes and Glassware
9 www.leco.com To order, call toll free: 1-800-292-6141
CF10 Gas Purifier
601-064 Catalyst Tube (Quartz)
601-065 Reagent Tube (Glass)
Carbon, Sulfur
CS WC230/ 230
601-390 Reagent Tube (Glass)
771-030 Filter Tube/Reagent Tube (Glass)
771-373 Reagent Tube (Glass)
772-739 Catalyst Heater Tube (Glass)
772-905 Combustion Tube (Quartz)
CS CSHS CSLS600/ 600/ 600/C600/S600/SHS SDR600/ 600
601-390 Reagent Tube (Glass)
604-112 Catalyst Tube (Quartz)
618-603 Catalyst Tube (Quartz)
771-030 Filter Tube/Reagent Tube (Glass)
771-373 Reagent Tube (Glass)
772-739 Catalyst Heater Tube (Glass)
772-905 Combustion Tube (Quartz)
CS CS844/C844/S844, 744/C744/S744
619-590-409 Incoming Catalyst Tube (Quartz)
619-590-412 Measure Catalyst Tube (Quartz)
619-591-314 Incoming Reagent Tube (Glass)
619-591-315 Furnace Reagent Tube (Glass)
619-591-683 Combustion Tube (Quartz)
619-591-740 Measure Reagent Tube (Glass)
RC612
617-548 Reagent Tube
625-505-125 Catalyst Heater Tube Rear (Quartz)
625-510-402 Reaction Tube (Quartz)
789-412 Catalyst Heater Tube (Quartz)
Refer to pages 10 and 11 for a visual guide to selecting the correct replacement tubesand glassware.
Hydrogen
DH603
617-548 Reagent Tube (Glass)
625-510-626 Reaction Tube (Quartz)
789-412 Catalyst Heater Tube (Quartz)
RHEN602
617-548 Reagent Tube (Glass)
789-412 Catalyst Tube (Quartz)
Oxygen, Nitrogen, Hydrogen
ONH ON OH NH ON/ / / /O/N/H836, /O/N736
617-716 Furnace Reagent Tube (Glass)
619-591-314 Incoming Reagent Tube (Glass)
625-710-392 Measure Catalyst Tube (Quartz)
625-711-116 Incoming Catalyst Tube (Quartz)
625-711-117 Measure Reagent Tube (Glass)
TCH ROH RH RHEN600/ 600/ 600/ 602/600/ 600/ 600, 500/ 500/TC RO TN TC RO500, 400/ 400/ 400TN TC RO TN
611-351-142 Catalyst Heater Tube (Quartz)
617-548 Reagent Tube (Glass)
617-716 Filter Tube (Glass)
618-809 Filter Tube, / / 500 (Glass)TC RO TN
789-412 Catalyst Heater Tube (Quartz)
Please Note: Quartz tubes are typically utilized for highertemperature applications (i.e., catalyst tubes). Glass reagent/filtertubes are designed for lower temperature applications. Glasstubes should be used in place of quartz tubes.not
Combustion/Reaction Tubes and Glassware
To order, call toll free: 1-800-292-6141 www.leco.com 10
Most commonly used items represented.
601-390
REAGENT
TUBE
(Glass)
6.0
0"
771-030
REAGENT
TUBE
(Glass)
4.0
0"
617-716
REAGENT
TUBE
(Glass)
4.2
5"
771-373
REAGENT
TUBE
(Glass)
6.0
0"
772-905
COMBUSTION
TUBE
(Quartz)
6.7
5"
604-112
CATALYST
TUBE
(Quartz)
19.0
0"
789-412
CATALYST
TUBE
(Quartz)
10.7
5"
772-739
CATALYST
TUBE
(Glass)
10.7
5"
611-351-142
CATALYST
TUBE
(Quartz)
10.7
5"
618-809
REAGENT
TUBE
(Glass)
11.4
0"
618-603
CATALYST
TUBE
(Quartz)
13.0
0"
625-510-402(Quartz)REACTION TUBE
RC AFTERBURNER612 with
625-510-626(Quartz)REACTION TUBE
DH603
617-548REAGENT
TUBE(Glass)
11.4
0"
625-505-125CATALYST
TUBE(Quartz)
10.7
0"
Combustion/Reaction Tubes and Glassware
11 www.leco.com To order, call toll free: 1-800-292-6141
Most commonly used items represented.
619-590-409
INCOMING
CATALYST TUBE
(Quartz)
625-711-117
MEASURE
REAGENT TUBE
(Glass)
625-711-116
INCOMING
CATALYST TUBE
(Quartz)
625-710-392
MEASURE
CATALYST TUBE
(Quartz)
619-591-314
INCOMING
REAGENT TUBE
(Glass)
619-591-740
MEASURE
REAGENT TUBE
(Glass)
619-591-683
COMBUSTION
TUBE
(Quartz)
619-591-315
FURNACE
REAGENT TUBE
(Glass)
619-590-412
MEASURE
CATALYST TUBE
(Quartz)
To order, call toll free: 1-800-292-6141 www.leco.com 12
Primary Standards and Calibration Samples
Calibration SamplesMoisture
Part No. Class Description Moisture Contents
502-091 LRM Calcium Oxalate 12.21% 50 g
Primary StandardsCarbon, Sulfur
Part No. Class Description % C % S % N Contents
501-718 NMI Low Alloy Steel Chips; Jernkontorets/Sweden; #40 0.596 0.192 0.0074 100 g
502-817 NMI High Alloy Steel Chips; Jernkontorets/Sweden; #37 0.0133 0.0009 150 g
502-808 NMI Silicon Steel Chips; /China; 31MIEC CE 0.074 0.0088 150 g
501-801 NMI White Cast Iron Chips; /United Kingdom; #489-1BCS 2.860 0.155 100 g
LECO LA ISO IECCorporation is A2 accredited in accordance with International Standards Organization / 17025:2005(Certificate No. 3285.01) and Guide 34:2009 (Certificate No. 3285.02) as a reference material producer. Productsdesignated with LRM or LCRM are manufactured and tested in compliance with ISO/IEC Guide 34:2009. Products
® ®
designated with NMI indicate that they are produced by a National Metrology Institute.
Information Iisted below is to be used only as a guide. Values listed represent an averagefrom multiple lots and approximate ranges are provided for comparative purposes only.Please call 800-292-6141 for exact chemistry and availability at the time of order.
All values in % unless otherwise indicated.Values in parentheses (x) are not certified and are included for information only.LCRM = LECO Certified Reference Material; LRM = LECO Reference Material and are registered trademarks of LECO Corporation.
Part No. Class Description % C % S % O % N Hydrogen Contents
502-414 LRM Steel Disk (1 g) 0.0189 0.0003 100 g
502-863 LRM Steel Pellet (1 g) 0.0360 0.0066 (0.0014) 0.0056 (0.4 ppm) 100 g
Disks and Pellets
Oxygen, Nitrogen
Part No. Class Description % C % O % N Contents
502-399 NMI Iron Powder; Jernkontorets/Sweden; #47 0.370 0.69 0.0062 35 g
Moisture
Part No. Class Description Crystalline H O2 Contents
501-919 NMI SARM SABS-4 Norite; 0.33% 100 g
Primary Standards and Calibration Samples
13 www.leco.com To order, call toll free: 1-800-292-6141
Information Iisted below is to be used only as a guide. Values listed represent an averagefrom multiple lots and approximate ranges are provided for comparative purposes only.Please call 800-292-6141 for exact chemistry and availability at the time of order.
LECO LA ISO IECCorporation is A2 accredited in accordance with International Standards Organization / 17025:2005(Certificate No. 3285.01) and Guide 34:2009 (Certificate No. 3285.02) as a reference material producer.Productsdesignated with LRM or LCRM are manufactured and tested in compliance with ISO/IEC Guide 34:2009. Productsdesignated with NMI indicate that they are produced by a National Metrology Institute.
Part No. Class Description % C % S % O % N Hydrogen Contents
501-676 LRM Steel Pin (1.0 g) 0.133 0.0058 454 g
501-993 Steel Pin (0.5 g) 0.0048 50 g
502-060 LCRM Steel Pin (5.0 g) 6.17 ppm 125 g
502-198 LRM Steel Pin (1.0 g) 0.0038 100 g
502-257 LRM Steel Pin (1.0 g) 0.0032 0.0660 100 g
502-494 Steel Pin (0.5 g) 0.0482 50 g
502-712 LCRM Steel Pin (1.0 g) 0.0014 0.0010 0.0016 0.0006 (0.7 ppm) 100 g
502-855 LRM Steel Pin (1.0 g) 0.0460 0.0126 0.0121 0.067 6.7 ppm 100 g
502-856 LRM Steel Pin (1.0 g) 0.0520 0.0016 0.0032 0.066 5.1 ppm 100 g
502-868 LRM Steel Pin (1.0 g) 0.0540 0.0163 0.0090 0.0072 (0.7 ppm) 100 g
502-874 LRM Steel Pin (1.0 g) 0.0535 0.0154 0.0366 0.0023 (2.1 ppm) 100 g
502-884 LRM Steel Pin (1.0 g) 0.800 0.0050 0.0036 0.0045 (1.3 ppm) 100 g
502-887 LRM Steel Pin (1.0 g) 0.0037 0.229 10.4 ppm 100 g
502-893 LCRM Steel Pin (1.0 g) 0.807 0.0135 0.0039 0.0021 (1.4 ppm) 100 g
502-894 LCRM Steel Pin (1.0 g) 0.691 0.0101 100 g
502-895 LCRM Steel Pin (1.0 g) 0.181 0.0044 0.0024 0.0048 (0.6 ppm) 100 g
502-903 LCRM Steel Pin (1.0 g) 0.0040 0.0509 4.4 ppm 100 g
502-904 LCRM Steel Pin (0.5 g) 0.052 0.0026 0.0034 0.0512 (2.4 ppm) 50 g
502-913 LCRM Steel Pin (1.0 g) 0.066 0.0049 0.0066 0.0557 3.5 PPM 100 g
502-916 LCRM Steel Pin (0.5 g) 0.383 0.0078 0.0032 0.0068 (0.9 ppm) 100 g
502-918 LCRM Steel Ring (1.0 g) 0.0120 0.0267 200 g
501-149 LRM Copper Pin (1.0 g) 0.0543 100 g
501-953 LRM Copper Pin (1.0 g) 0.00032 100 g
502-411 Nickel Pin (1.0 g) 0.00024 100 g
502-867 LRM Titanium Pin (0.12 g) 0.0230 0.1400 0.012 (29 ppm) 24 g
502-876 LCRM Titanium Pin (0.12 g) 0.009 0.311 0.006 15.2 ppm 24 g
502-879 LCRM Titanium Pin (0.12 g) 0.0160 0.1000 0.0140 (63 ppm) 24 g
502-888 LRM Titanium Pin (0.12 g) 0.049 0.354 0.006 27 ppm 24 g
502-891 LCRM Titanium Pin (0.12 g) 0.011 0.117 0.010 101 ppm 24 g
502-921 LCRM Titanium Pin (0.12 g) 0.007 0.066 0.007 (31.7 ppm) 24 g
502-890 LCRM Zirconium Pin (0.12 g) 0.0145 0.141 0.0020 9.1 ppm 24 g
Pins and Rings
All values in % unless otherwise indicated.Values in parentheses (x) are not certified and are included for information only.LCRM = LECO Certified Reference Material; LRM = LECO Reference Material and are registered trademarks of LECO Corporation.
Primary Standards and Calibration Samples
To order, call toll free: 1-800-292-6141 www.leco.com 14
Information Iisted below is to be used only as a guide. Values listed represent an averagefrom multiple lots and approximate ranges are provided for comparative purposes only.Please call 800-292-6141 for exact chemistry and availability at the time of order.
LECO LA ISO IECCorporation is A2 accredited in accordance with International Standards Organization / 17025:2005(Certificate No. 3285.01) and Guide 34:2009 (Certificate No. 3285.02) as a reference material producer. Productsdesignated with LRM or LCRM are manufactured and tested in compliance with ISO/IEC Guide 34:2009. Productsdesignated with NMI indicate that they are produced by a National Metrology Institute.
Part No. Class Description % C % S % O % N Hydrogen Contents
501-950 LRM Iron Chip 0.0062 0.0046 100 g
502-704 LCRM Steel Chip 0.0007 0.0001 0.0216 0.0002 (0.4 ppm) 100 g
502-698 LCRM Cast Iron Powder 2.16 0.013 150 g
502-899 LCRM Cast Iron Powder 3.19 0.045 100 g
502-919 LCRM Cast Iron Powder 3.81 0.115 150 g
502-920 LCRM Cast Iron Powder 4.88 0.013 150 g
502-813 LRM Fly Ash 1.07 1.32 20 g
502-843 Fly Ash 42.4 0.29 20 g
502-138 Iron III Oxide Powder 30.2 10 g
502-702 LCRM Iron Powder 0.342 0.0100 1.10 0.0079 (6 ppm) 100 g
502-924 LCRM Nickel Chip 0.0059 0.00056 100 g
502-318 LRM Ore 0.19 0.66 25 g
502-319 LRM Ore 2.19 0.66 25 g
502-635 Ore 0.55 45.0 25 g
502-693 LCRM Ore 2.07 2.27 25 g
502-139 LRM Silicon Dioxide Powder 53.2 10 g
502-630 LRM Synthetic Carbon 0.53 50 g
502-632 LCRM Synthetic Carbon 0.13 50 g
502-696 LCRM Synthetic Carbon 1.00 50 g
502-905 LCRM Synthetic Carbon 5.00 50 g
502-706-HAZ LCRM Titanium Powder 279 ppm 25 g
502-707-HAZ LCRM Titanium Powder 276 ppm 25 g
502-708-HAZ LCRM Titanium Powder 259 ppm 25 g
501-123 LRM Tungsten Carbide Powder 6.26 100 g
502-141 LRM Tungsten Trioxide Powder 20.7 10 g
502-908 LCRM Zirconium Dioxide Powder 25.8 10 g
Chips and Powders
All values in % unless otherwise indicated.Values in parentheses (x) are not certified and are included for information only.LCRM = LECO Certified Reference Material; LRM = LECO Reference Material and are registered trademarks of LECO Corporation.
15 www.leco.com To order, call toll free: 1-800-292-6141
See individual consumable and spares reference cards for precise location of o-rings formost instruments. For exact o-ring sizes, please refer to the drawings on page 16.
CS WC230/ 230
Part No. O-Ring Location
605-700-087 Package O-Ring 230
772-520 Reagent Tube/Filter Tube
772-738 Catalyst Heater Tube/Reagent Tube
781-424 Dust Filter Tube Assembly
762-058 Dust Filter Assembly/Combustion Tube
601-920 Bottom of Combustion Tube
CS CSHS CSLS600/ 600/ 600/C600/S600/600/ 600SHS SDR
Part No. O-Ring Location
601-920 Combustion Tube
765-976 Reagent Tube Seal
772-520 Reagent Tube
772-738 Catalyst Heater Tube/Assembly Furnace
CS CS844/C844/S844, 744/C744/S744
Part No. O-Ring Location
617-083 Catalyst Block
619-591-385Combustion Tube Upper/Compression Ring
619-592-490 CS844/C844/S844 O-Ring Pack
619-592-926 Combustion Tube Lower
772-520 Catalyst Tube/Reagent Tube
762-058 Dust Filter
765-976 Catalyst Tube/Reagent Tube
774-489 Combustion Tube Ring
778-114 Catalyst Tube
DH603
Part No. O-Ring Location
602-802 Combustion Tube
617-083 Catalyst Block
765-976 Reagent Tube
772-520 Reagent Tube/Catalyst Heater Tube
773-913 Piercer
ONH ON OH NH ON/ / / /O/N/H836, /O/N736
Part No. O-Ring Location
601-684 Loading Head Assembly
617-083 Catalyst Block
701-147 Screen Filter
762-058 Loading Head Assembly
765-976Reagent Tube/ Scrubber/OMILower Electrode Assembly
772-520 Catalyst Tube/Reagent Tube/Screen Filter
778-114 Combustion Tube
RC612
Part No. O-Ring Location
601-442 Catalyst Block/Catalyst Heater Tube
602-802 Combustion Tube
617-083 Catalyst Block
765-976 Reagent Tube
772-520 Catalyst Heater Tube/Reagent Tube
TCH ROH RH RHEN TC600/ 600/ 600/ 602/ 600/600/ 600, 500/ 500/ 500, 400/RO TN TC RO TN TC400/ 400RO TN
Part No. O-Ring Location
156-002 Lower Electrode Assembly
602-803 Loading Head Assembly
617-083 Incoming Scrubber/Catalyst Heater
617-440 Loading Head Filter Assembly
765-976 Incoming Scrubber
772-520 Reagent Tubes
773-913 Loading Head/ CellTC
774-425 Loading Head Assembly
778-114 Incoming Scrubber Assembly
O-Rings
To order, call toll free: 1-800-292-6141 www.leco.com 16
Drawings to Scale.
778-114
156-002
772-520
601-920
781-424
772-738
774-489
762-058
602-802601-442
773-913
602-803
617-440
619-591-385
619-592-926
765-976
617-083
601-684
701-147
O-Rings
17 www.leco.com To order, call toll free: 1-800-292-6141
Evacuated Samplers and Pin Tubes
903-9A3-184
DIFFUSIBLE
903-9B3-194
DIFFUSIBLE
511-038 21.5-inch Pin Tube Holder—aconvenient tool for safely inserting the pin tube.
511-040 31-inch Pin Tube Holder—a convenienttool for safely inserting the pin tube.
Evacuated Pin Tubes for Rapid Sampling of Molten MetalsCarbon • Sulfur • Oxygen • Nitrogen • Hydrogen
Part No. Pin Tube Type Inside Diameter Length Qty.
511-036-150 Standard 4 mm ±0.2 mm (0.159" ±0.009") 146 mm (5.75") 1500
511-039-150 Standard 3.5 mm ±0.2 mm (0.139" ±0.009") 146 mm (5.75") 1500
511-037-150 Precision 4 mm ±0.025 mm (0.159" ±0.001") 146 mm (5.75") 1500
511-244 High Vacuum 6 mm (0.236") 160 mm (6.30") 150
Evacuated Steel Sampler with Inner Steel Pin
903-9A3-174 3-foot Cardboard, 6-inch Non-Splash Sleeve without Anti-Skull Coat
903-9A3-184 3-foot Cardboard, 6-inch Non-Splash Sleeve with Anti-Skull Coat
903-9A3-124 3-foot Cardboard, 12-inch Non-Splash Sleeve without Anti-Skull Coat
903-9A3-194 3-foot Cardboard, 12-inch Non-Splash Sleeve with Anti-Skull Coat
Evacuated Steel Sampler with Quartz Lining
903-9B3-174 3-foot Cardboard, 6-inch Non-Splash Sleeve without Anti-Skull Coat
903-9B3-184 3-foot Cardboard, 6-inch Non-Splash Sleeve with Anti-Skull Coat
903-9B3-124 3-foot Cardboard, 12-inch Non-Splash Sleeve without Anti-Skull Coat
903-9B3-194 3-foot Cardboard, 12-inch Non-Splash Sleeve with Anti-Skull Coat
Evacuated Pin Tubes—for rapid sampling ofmolten metals.
To order, call toll free: 1-800-292-6141 www.leco.com 18
Common Accessories
501-241 Vacuum Grease
501-614 Spatula
502-023 Glass Funnel
503-032 Glass Scoop
603-350 O-Ring Installation Tool
617-997 Metal Funnel
619-995 Bar Code Reader
619-591-699 0.1 Micron Filter
625-510-619 Manual Tubing Cutter 0.375 - 1.125 Dia
625-711-260 Doser Screen/Stem Removal Tool
760-138 Tweezers, Straight
761-929 Crucible Tong
762-515 O-Ring Removal Tool
766-053 Crucible Tweezers, Curved
773-579 Stainless Steel Scoop
775-307 Filter Tool (Thumbscrew)
Miscellaneous Operating AccessoriesRefer to page 20 for a visual guide of Miscellaneous Operating Accessories.
Carbon and Sulfur Determinators
Common Parts
501-082 Wire Brush
501-110Silicone Tubing (Pinch Valve/Dust Box,CS230/CS600/WC600)
501-110-009 Pinch Valve Tubing (744 & 844 Series)
601-483-100 Paper
601-484 Printer Ribbon Cartridge
775-306 Secondary Filter
782-880 Cassette Vacuum Filter, 0.3 Micron
619-591-454 Cloth Vacuum Bag
619-591-456 HEPA Vacuum Filter
619-591-622Disposable Vacuum Bag, 5/pkg; plusFilters, 2/pkg
612-717 Trap Tube Assembly (WC230 only)
Maintenance Parts Kits
104-144 C/S/CS230
104-149 C/S/CS600
104-156C/CS744 with Manual Cleaner andPerformance Pkg
104-157C/CS744 with Autocleaner andPerformance Pkg
104-158 C/CS744 with Manual Cleaner
104-159 C/CS744 with Autocleaner
104-160 S744 with Performance Pkg
104-161 S744 with Manual Cleaner
104-153 CS844
104-154 S844
104-155 C844
19 www.leco.com To order, call toll free: 1-800-292-6141
Miscellaneous Operating Accessories
RC612
614-704 Air Filter
625-505-137 Quartz Boat Tweezers
625-505-430 Nickel Boats
625-510-608Dual Flowmeter Kit50-1000 (0.25-5.75 L)CC
780-044 Boat Puller
781-335 Quartz Boats
782-059 Nickel Liners
Hydrogen Determinators
DH603
614-704 Air Filter
625-510-146 Sample Puller
625-510-222 Piercer Needle
778-625 Piercer Seals
RHEN602
104-151 Maintenance Parts Kit, 602RHEN
625-711-186 EN Electrode Cleaning Brush Assembly
619-802 EN Electrode Cleaning Brush (only)
761-744 Molecular Sieve Assembly
Refer to page 20 for a visual guide of Miscellaneous Operating Accessories.
Carbon and Moisture DeterminatorsNitrogen and Oxygen Determinators
Common Parts
502-374-100 Particulate Filter Glass, 25 mm, 100/pkg
611-373 Lower Electrode Insert Wrench
619-591-724 Coolant, 900 ml
620-760 Vacuum Filter, 3 gal
625-710-880 O-Ring Pack
783-785-110-HAZ Supelco™ OMI Filter
ONH836/ON836/OH836/NH836/O836/N836/H836
104-152 Maintenance Parts Kit, ONH/OH/H836
TCH600, TC500, TC400 Series
104-145 Maintenance Parts Kit, TC400/500/600
104-146 Maintenance Parts Kit, TN400/500/600
104-147 Maintenance Parts Kit, RO400/500/600
104-148 Maintenance Parts Kit, ROH600/TCH600
617-528 Oxygen Scrubber Sealing Cap
617-726 Oxygen Scrubber Removal Tool
619-982 Lower Autocleaner Brush, EN
625-711-186Cleaning Brush Assembly (619-803 BrushOnly)
625-711-182Cleaning Brush Assembly (774-652 BrushOnly)
775-306 Secondary Filter
775-416Small Cleaning Brush Assembly (188-012Brush Only)
783-301 Lower Autocleaner Brush, Std
To order, call toll free: 1-800-292-6141 www.leco.com 20
780-044 Boat Puller
775-416 Small Cleaning Brush Assembly
188-012 Brush (only)
774-652Brush
(only)
625-711-182Brush Assembly
(All Series Lower Electrode Brush)
761-929 Crucible Tongs
502-023Funnel
501-614Spatula
503-032Glass Accelerator Scoop
760-138 Tweezers, Straight766-053 Crucible Tweezers, Curved
773-579Stainless Steel Scoop
Miscellaneous Operating Accessories
619-802Brush (only)
625-711-186Brush Assembly
( Series Brush)EN
617-997Funnel
611-373Lower Electrode Insert Wrench
619-982Brush Assembly
( Series Brush)EN
783-301Lower Autocleaner
Brush, Std
21 www.leco.com To order, call toll free: 1-800-292-6141
Upgrades and OptionsBalances
751-050-110 3-Place Balance/Interface Kit (1.0 mg)
751-350-110 4-Place Balance/Interface Kit (0.1 mg)
751-700-120 5-Place Balance/Interface Kit (0.01 mg)
751-600-1206-Place Balance/Interface Kit(0.001 mg)
CS230
259-059UPGR Software Upgrade
CF10 Gas Purification Unit
617-249-HAZ CS Halogen Trap Kit
621-891 Vacuum Cleaner Kit
621-895Windows Upgrade Kit(Software, Comm Cable)
621-896PC PCUpgrade Kit ( , Monitor, Keyboard,Mouse, and Software)PC
621-897 Autocleaner Kit (requires 621-891)
625-513G Shuttle Loader Kit (without autocleaner)
625-514G Shuttle Loader/Autocleaner Kit
CS600
259-034UPGR Software Upgrade
604-570-110ADA-200 Automatic AcceleratorDispenser (120 V~, 60 Hz, 15 W)
604-570-120ADA-200 Automatic AcceleratorDispenser (220 V~, 50/60 Hz, 15 W)
617-249-HAZ CS Halogen Trap Kit
618-430G Batch Loader Kit
625-505-980 Balston Filter Upgrade Kit
625-510-624Kit Carrier Gas Conversion Helium toArgon / 600CSLS SLS
625-511G Shuttle Loader Kit ( 3185 and below)SN
625-512G Shuttle Loader Kit ( 3186 and above)SN
744 Series
619-591-790 Element Filter for 619-590-485 10AF
259-078UPGR Software Kit Upgrade C/ /S SeriesCS
619-591-840 Kit Shuttle Loader C/S 60-Pos
619-592-490 Pack O-Ring C/ /S844CS
782-880 Filter Vacuum 0.3 Micron
619-592-150 Kit Trap Fluorine/Chlorine
619-592-685Kit Upgrade Fan Variable Speed w/oSoftware
619-591-845 Kit Loader Shuttle C/S 10 Pos
619-592-750Kit Add-On Cleaner ManualNon-Heated Filter
619-592-752Kit Add-On Autocleaner Non-HeatedFilter
619-592-754Kit Add-On Monitor TouchscreenMounted
625-711-693Kit Assembly Card Furnace Fan ControlC/S/CS
625-711-855 Element Filter for 625-711-840
844 Series
259-078UPGR Software Upgrade
619-592-150 Fl/Cl Trap Kit
619-591-454 Bag Vacuum Cloth Permanent
619-591-456 Filter VacuumHEPA
619-591-622Bag Vacuum Disposable (5 pk) andFilters (2 pk)
619-591-790 Element Filter for 619-590-485 10AF
259-078UPGR Software Kit Upgrade C/ /S SeriesCS
619-592-150 Kit Trap Fluorine/Chlorine
619-591-840 Kit Loader Shuttle C/S 60-Pos
619-592-490 Pack O-Ring C/ /S844CS
619-591-845 Kit Loader Shuttle C/S 10-Pos
782-880 Filter Vacuum 0.3 Micron
619-593-542 Hose Vacuum
619-592-504 Kit Replacement Vacuum Dust 744/844
619-592-670Kit Upgrade Fan Variable Speedw/Software
619-592-672Kit Upgrade Fan Variable Speed
3084 w/CardSN �
619-592-674Kit Upgrade Fan Variable Speed SN
�3084 w/o Card
619-593-162Assembly Cap/Lance Filter Dust HeatedManual
619-593-161Assembly Cap/Lance Filter DustNon-Heated Manual
625-711-855 Element Filter for 625-711-840
619-592-895 Kit Cooling Control Upgrade
DH603
259-069UPGR Software Upgrade
High Purity Gas Regulators
619-592-405 2 Stg Ultra High Purity Inert Gas Kit
619-592-407 2 Stg Air Kit
619-592-408 2 Stg High Purity KitCO2
619-592-403 2 Stg High Purity Oxygen Kit
619-592-404 2 Stg High Purity Hydrogen Kit
619-592-406 2 Stg High Purity Inert Gas Kit
To order, call toll free: 1-800-292-6141 www.leco.com 22
Upgrades and Options736 Series
259-081UPGR Software Kit Upgrade O/N/H Series
621-377Purifier Power 15 k /10.5 kWVA( Only)USA
625-710-880 Pack O-Ring
625-711-465 Kit Bracket Hood Vent
625-711-470 Kit Add-On Autocleaner O/N/H
625-712-206Kit Add-On 20-Pos Crucible Shuttle
Loader 3131SN �
625-711-736 Kit Add-On Carousel Sample 20-Pos
625-712-210Kit Add-On 20-Pos Crucible Shuttle
Loader /Sample Carousel 3131SN �
625-711-855Replacement Element Filter for625-711-840
625-711-887 Kit Sound Reduction Vacuum Enclosure
625-711-885Kit Liquid to Liquid to Dual CoolingConversion
836 Series
259-081UPGR Software Upgrade
625-711-180Liquid-Liquid Heat ExchangerAdd-On Kit
619-591-790 Element Filter for 619-590-485
259-081UPGR Software Kit Upgrade O/N/H Series
621-377Purifier Power 15 k /10.5 kWVA( Only)USA
625-710-880 Pack O-Ring
625-711-729Kit Upgrade Filter Furnace Disc SN3044-3279
625-711-855Replacement Element Filter for625-711-840
625-711-887 Kit Sound Reduction Vacuum Enclosure
625-712-204Kit Add-On 20-Pos Crucible Shuttle
Loader 3130SN �
625-712-206Kit Add-On 20-Pos Crucible Shuttle
Loader 3131SN �
625-712-208 Kit Add-On 20-Pos Sample Carousel
625-712-210Kit Add-On 20-Pos Crucible Shuttle
Loader/Sample Carousel 3130SN �
625-711-740Kit Add-On 20-Pos Crucible Shuttle
Loader/Sample Carousel 3131SN �
625-711-470 Kit Add-On Autocleaner O/N/H
625-711-472 Autocleaner Upgrade Kit, 3083SN �
625-712-180 Ar Cell Upgrade KitTC
625-712-182Kit Variable Speed Cabinet Fan,
3121-3419SN
625-712-184Kit Variable Speed Cabinet Fan,
3120SN DN REVG
625-712-186Kit Variable Speed Cabinet Fan,
3120SN DN REVF
Printer Kits
601-480-110 Dot Matrix Printer Kit ( )USB
621-453-110 Deskjet Printer Kit
RC612
259-063UPGR Software Upgrade
620-400-210 Autoloader Add-On Kit
625-507 Incoming Gas Purifier
625-510-622 Autoloader to Manual Conversion
ROSi600
259-074UPGR Software Upgrade
625-501-938GAutocleaner/Batch Loader Kit
( 3726)SN �
625-501-940GAutocleaner/Batch Loader Kit
( 3725)SN �
625-501-942G Batch Loader Kit ( 3726)SN �
TC TCH400/500/600, 600*
259-074UPGR Software Upgrade
617-834 Incoming Gas Scrubber Kit**
617-837 Gas Dose Kit (N/O)**
621-422 Vacuum Cleaner
625-501-917Autocleaner Kit ( 500 3180;TC SN �
600 3276)TC SN �
625-501-919Autocleaner Kit ( 500 3181-3329;TC SNTC SN600 3277-3725)
625-501-915GAutocleaner Kit ( 500 3330;TC SN �
TC SN600 3726)�
625-501-923GAutocleaner/Batch Loader Kit ( 500TC
3180; 600 3276)SN TC� �
625-501-925GAutocleaner/Batch Loader Kit ( 500TCSN TC SN3181-3329; 600 3277-3725)
625-501-921GAutocleaner/Batch Loader Kit ( 500TC
3330; 600 3726)SN TC SN� �
625-501-927GBatch Loader Kit ( 500 3330;TC SN �
600 3726)TC �
625-711-887 Kit Sound Reduction Vacuum Enclosure
625-712-220 Kit Chiller Recirculating 230V FamilyTC
633-103-065 Kit Chiller Recirculating 115V FamilyTC
633-103-119TC TN TCH/ 400/500/600/ 600 ArgonCarrier Gas Conversion Kit
*Automation is not available for 400 Series DeterminatorsTC**Standard on 600 Series DeterminatorsTC
23 www.leco.com To order, call toll free: 1-800-292-6141
Conversion KitsCS230 Series
621-578 CS230 to CS230CL
621-836 S230 to S230DR
621-837 S230 to 230CS
621-838 S230 to 230CS CL
621-839 S230 to 230CS CH
621-840 S230 to S230SH DR
621-841 S230 to 230SH CS SH
621-842 S230 to 230SH CS CSH
621-843 C230 to 230CS
621-844 C230 to 230CS SH
621-845 C230 to C230CL CLH
621-846 C230 to 230CL CS CL
621-847 C230 to C230CH CLH
621-848 C230 to 230CH CS CH
621-849 C230 to 230CH CS CSH
621-850 CS CS SH230 to 230
621-851 CS CH CS CSH230 to 230
621-852 CS SH CS CSH230 to 230
CS600 Series
619-938 SHS SDR600 to 600
619-939 S600 to 600SDR
621-350G SHS CSHS600 to 600
621-368 CS CSHS600 to 600
625-351G S600 to 600CS
625-352 C600 to 600CS
625-501-980 CS CSLS600 to 600
CS744 Series
619-592-740 C/ 744 to C/ 744-PCS CS
619-592-742 S744 to S744-PS
619-592-744 S744- to 744-PPS CS
619-592-746 C744 to 744CS
619-592-748 S744 to 744CS
CS844 Series
619-592-912 S844 to 844CS
619-592-910 C844 to 844CS
DH603 Series
625-515 DH DH603 to 603D
• Unit must be returned to the Global Support Center for installationLECO
• Unit must be in working order prior to shipment to LECO
• Customer is responsible for shipping charge both to and from LECO
• Conversion kit cost does not include labor
• Conversion process includes Preventive Maintenance service
• Please call 269-985-5497 or contact your local Sales Engineer for more informationLECO
Conversion KitsTC400 Series
621-424 TN TC400 to 400
621-425 RO TC400 to 400
TC500 Series
617-991 TN TC500C to 500C
617-994 RO TC500C to 500C
617-995 RO TC500 to 500
TC600 Series
618-481 TC TCH600 to 600
618-682 RO600 to ROH600
619-890 RO TC600 to 600
621-297 RH TCH600 to 600
621-298 RO TCH600 to 600
621-299 TN TCH600 to 600
621-997 TN TC600 to 600
• Unit must be returned to the Global Support Center for installationLECO
• Unit must be in working order prior to shipment to LECO
• Customer is responsible for shipping charge both to and from LECO
• Conversion kit cost does not include labor
• Conversion process includes Preventive Maintenance service
• Please call 269-985-5497 or contact your local Sales Engineer for more informationLECO
To order, call toll free: 1-800-292-6141 www.leco.com 24
ON736 Series
625-712-130N736 to N736-P;
736 to 736-PON ON
625-712-132N736 to 736;ONN736-P to 736-PON
625-712-134 N736 to 736-PON
625-712-136-HAZ O736 to O736-P
625-712-138 O736 to 736ON
625-712-140-HAZ O736 to 736-PON
625-712-142 O736-P to 736-PON
ONH836 Series
625-712-102 H836 to 836ONH
625-712-104 N836 to 836ONH
625-712-106 NH ONH836 to 836
625-712-108 O836 to 836ONH
625-712-110 OH ONH836 to 836
625-712-112 ON ONH836 to 836
625-712-114 O836 to 836ON
625-712-116 O836 to 836OH
625-712-118 N836 to 836ON
625-712-120 H836 to 836OH
625-712-122 N836 to 836NH
625-712-124 H836 to 836NH
Spectroscopy Spare Parts
25 www.leco.com To order, call toll free: 1-800-292-6141
GDS850 Spare Parts
190-005 Screw Isolator Ceramic Lamp
502-396 Sample Cooling Fluid
578-672 O-Ring 214 Non-heated
607-302 Filter Element 2-inch Dia
607-303 Filter Element Odor Mist
610-380 Retainer Puck RF
610-384 Screw Retainer Puck RF
611-351-192 Mg/Fl Window, Non-Hardened
611-351-250 Mg/FL Window, Hardened
612-310 O-Ring 327 Slidegate
612-509 Fomblin Grease
612-677 Isolator Ceramic Lamp
612-805O-Ring 019 (One for Non-heated,Two For Heated)
612-815 Anode Removable 4 mm 98
612-819 Spacer Lamp Screw
612-823 Anode Removable 2 mm 98
612-857 Base Lamp Cu 98RF
612-859 Anode Removable 4 mm 98RF
612-879 Kit Lamp 4 mm Rebuild 98
615-989-010 Heater (Heated )
618-386Anode Removable 2 mm w/GapSmall
618-940 Fiber Gasket Ring Heated
775-314 O-Ring 132 Heated
Common Spare PartsGDS
502-234-HAZ Reagent Anhydrous Alcohol 500 ml
502-237 Wipes Foam 25/pk
502-629 Paper Lens Tissue Cleaning 100
534-356 O-Ring 110 Small Red Inner
607-315 O-Ring Blue
607-399 Sleeve Lamp 4 mm
607-406 O-Ring Large Red Outer
609-114 O-Ring 109 Small 2mm Red Inner
616-999 Assy Cathode 2 mm–4 mm Plt
618-296 Spacer Lamp Inner 4 mm
618-297 Spacer Lamp Inner 2 mm Small
618-382 O-Ring 009 Small 2 mm Lamp Face
618-384 Assy Reamer/Facer 2 mm Small
618-385Sleeve Cathode 2 mmw/Gap S
618-389 Assy Cathode 2 mm w/Gap Plt
619-572 Drill 4 mm
621-339 Assy Reamer/Facer 4 mm
779-377 Oil Vacuum Pump 400 ml
GDS500 Spare Parts
156-003 O-Ring 023 Lens To Inner
601-579 O-Ring 119 Spring Spacer
607-306 Anode 4 mm
607-623 O-Ring Inner Lens Assembly
607-768 Anode Removable 2 mm Std
611-351-263 Valve Sol Vacuum Enable
612-657 Screw Fastener Lamp Delrin
615-797 Swab Cotton Tip 6-inch Lg 100/pk
615-923 Suprasil Window
615-961 Suprasil Window Assembly
618-158 O-Ring Package
618-228 Lamp Rebuild Kit 4 mm
618-229 Lamp Rebuild Kit 2 mm Standard
618-388Anode Removable 2 mm w/GapSmall
702-656 Filter Exhaust w/ ElementDXS
760-226 O-Ring 016 Small Lamp Block
771-446 O-Ring 029 Lens Outer
778-114 O-Ring 111 Poppet Valve
779-513 O-Ring 135 Large Lamp Block
Preventive Maintenance/Application NotesPreventive Maintenance Agreements
PMA LECO PMAs are a smart, convenient way to help you prevent unexpected downtime and associated costs. With s,trained service specialists perform maintenance checks on your instrument (including cleanings and flow-pathLECOrebuilds) on a regularly scheduled basis. One, all-inclusive part number covering routine parts, labor, and travel can beeasily purchased and renewed.
Notes: • Replacement parts and labor that may be necessary to repair an instrumentare included in this package.not
• s conducted outside the contiguous United States will incur additional travel expenses.PMA
Start maximizing your production today with s from . To receive a quote or for more detailed information,PMA LECOplease call 269-985-5497.
Application Notes
Register for free access to 's extensive library of application notes, journal articles, and other resourcesLECOat www.leco.com/registration. To request an analytical application notes (209-050-069), complete theCDrequest form at www.leco.com/contact-us, or call us toll-free at 800-292-6141.
To order, call toll free: 1-800-292-6141 www.leco.com 26
Inorganic Instruments Part No.
C/S/ 230 Carbon/Sulfur (1 Visit)CS 104-109-HAZ
C/S/ 600 Carbon/Sulfur (1 Visit)CS 104-117-HAZ
C/ 744 Carbon/Sulfur Auto Clean No Perform (1 Visit)CS 104-137-HAZ
C/ 744 Carbon/Sulfur Auto Clean w/Perform (1 Visit)CS 104-135-HAZ
C/ 744 Carbon/Sulfur Man Clean No Perform (1 Visit)CS 104-136-HAZ
C/ 744 Carbon/Sulfur Man Clean w/Perform (1 Visit)CS 104-134-HAZ
C844 Carbon (1 Visit) 104-133-HAZ
CS844 Carbon/Sulfur (1 Visit) 104-131-HAZ
DH603 Hydrogen (1 Visit) 104-178-HAZ
ON/O/N736 Oxygen/Nitrogen w/Perform (1 Visit) 104-180-HAZ
ON/O/N736 Oxygen/Nitrogen No Perform (1 Visit) 104-182-HAZ
ON/O/N836 Oxygen/Nitrogen (1 Visit) 104-130-HAZ
ONH OH/ /H836 Oxygen/Nitrogen/Hydrogen (1 Visit) 104-129-HAZ
RC612 Carbon/Moisture (1 Visit) 104-172-HAZ
RHEN602 Hydrogen (1 Visit) 104-128-HAZ
RO500/600 Oxygen (1 Visit) 104-115-HAZ
ROH TCH600/ 600 Oxygen/Hydrogen (1 Visit) 104-116-HAZ
S744 Sulfur Man Clean No Perform (1 Visit) 104-139-HAZ
S744 Sulfur w/Perform (1 Visit) 104-138-HAZ
S844 Sulfur (1 Visit) 104-132-HAZ
TC600 Nitrogen/Oxygen (1 Visit) 104-113-HAZ
TN500/600 Nitrogen (1 Visit) 104-114-HAZ
WC230 Carbon (1 Visit) 104-174-HAZ
WC600 Carbon (1 Visit) 104-176-HAZ
Spectrometers
NOTE PMA: Spectrometer kits do not include travel or expenses.Please contact Service for a price estimate.LECO Part No.
GDS500 Standard (1 Visit) 104-140
GDS500 Extended (1 Visit) 104-141
GDS850 Standard (1 Visit) 104-142
GDS850 Extended (1 Visit) 104-143
27 www.leco.com To order, call toll free: 1-800-292-6141
SmartLine Internet-Based Remote Diagnostics®
SmartLine provides you with an online support connection between your instrument and 's GlobalLECOSupport Center, allowing trained service specialists to remotely operate your instrument as if they were rightthere with you.
How it Works1. Simply call 's Global Support Center at 269-982-5497 during normal working hours to get yourLECO
session code*.2. Log onto http://rc.leco.com and enter your session code.3. accepts the connection. Your session has begun!LECO SmartLine
* 's normal working hours are Monday through Friday, 8:00 a.m. to 5:00 p.m. . Additional sessionsLECO ESToutside normal business hours can also be scheduled by appointment.
To contact regarding any service-related issue, call 269-982-5497.LECO
Remote Diagnostics/Cornerstone Mobile
Description Part No.
SmartLine Start-Up (includes five hours of on-line support) 710-198-B/O
SmartLine Renewal (Five-hour time blocks, valid for one year from date of purchase) 710-199-B/O
Description Part No.
1 Year Mobile SubscriptionCornerstone 619-592-882-B/O
3 Year Mobile SubscriptionCornerstone 619-592-899-B/O
Cornerstone Mobile®
The Mobile remote viewing option allows users of ’s brand softwareCornerstone CornerstoneLECOplatform to view data, plots, and instrument status from the convenience of their mobile device orcomputer. Available for Android™ devices, iPhone , iPad , and Windows 10-compatible personal
® ® ®
computers.
Standard connectivity infrastructure utilizes an Internet-based server to securely pass authentication andinstrument data between the instrument and the mobile device or computer. Server softwareCornerstonemay also be deployed on the customer’s own private network. Data is retained only by the Cornerstoneinstrument, is not stored on the Internet-based server, and is not accessible by any mobile device once theinstrument disconnects from the server.
Contact Information
International Offices/Subsidiaries
United States Canada Outside United States/Canada800-292-6141 • 269-985-5496 800-268-0215 • 905-564-6577 269-985-5496Fax: 269-982-8987 Fax: 905-564-6582 Fax: 269-982-8987
Email/LECO Web [email protected] • www.leco.com
To order, call toll free: 1-800-292-6141 www.leco.com 28
AfricaLECO Africa (Pty.) Ltd.Kempton Park, South AfricaPh: 27-11-974-1681www.lecoafrica.co.za
ArgentinaLECO Argentina S.A.Buenos Aires, C.F., ArgentinaPh: 54-114-523-8077www.lecoarg.com.ar
AustraliaLECO Australia Pty. Ltd.Castle Hill, NSW, AustraliaPh: 61-2-9849-5900www.leco.com.au
BrazilLECO Instrumentos Ltda.Rio De Janeiro, BrazilPh: 55-212-538-4250www.lecobrasil.com.br
CanadaLECO Instruments ULCMississauga, Ontario, CanadaPh: 905-564-6577www.leco.com
ChinaLECO Corp/Beijing OfficeBeijing, ChinaPh: 86-10-6512-8877www.lecochina.com.cn
Czech RepublicLECO Instrumente Plzen s.r.o.Plzen/Czech RepublicPh: 420-37-751-0811http://ceu.leco-europe.com
FranceLECO FranceGARGES-Les-GONESSE;Cedex, FrancePh: 33-134-45-4600http://fr.leco-europe.com
GermanyLECO Instrumente GmbHMönchengladbach, GermanyPh: 49-2166-687-0http://nl.leco-europe.com
Hong KongLECO Instruments Hong Kong Ltd.Kowloon, Hong KongPh: 852-2387-7028www.lecochina.com.cn
ItalyLECO Italy S.R.L.Milan, ItalyPh: 39-02-953-43391http://it.leco-europe.com
JapanLECO Japan CorporationTokyo, JapanPh: 813-6891-5800www.leco.co.jp
KoreaLECO Korea Co. Ltd.Gyeonggi-Do, KoreaPh: 82-31-478-2441www.leco.co.kr
MalaysiaLECO Instruments (M) Sdn. Bhd.Selangor, D.E. MalaysiaPh: 60-3-7770-2100www.leco.com.my
MexicoLECO Mexico, S de RL de CVMonterrey, NL CP 64900 MexicoPh: 52-81-83-49-4384www.lecomexico.com
Middle EastLECO Middle East International FZEDubai, United Arab EmiratesPh: 971-4-3209667http://mena.leco-europe.com
The NetherlandsLECO Europe B.V.AG Geleen, The NetherlandsPh: 31-46-4747473http://nl.leco-europe.com
PeruLECO Instrumentos PeruLima, PeruPh: 511-719-6124www.leco.com
PolandLECO Polska Sp.zo.oTichy, PolandPh: 48-32-2000-760http://baltic.leco-europe.com
RussiaZ.A.O. LECO Center MoscowMoscow, RussiaPh: 7495-710-3818http://ru.leco-europe.com
SpainLECO Instrumentos S.L.Madrid, SpainPh: 3491-803-1250http://es.leco-europe.com
SwedenLECO Corporation Svenska AB183 62 Täby, SwedenPh: 468-594-11000http://neu.leco-europe.com
TaiwanLECO Instruments Taiwan Ltd.Taipei, Taiwan R.O.C.Ph: 886-2-2518-4699www.leco.com.tw
ThailandLECO Instruments (Thailand) Ltd.Bangkok, ThailandPh: 66-2-886-4350www.leco.com
UkrainePE LECO UkraineKiev, UkrainePh: 380-44-494-1720http://ua.leco-europe.com
United KingdomLECO Instruments (U.K.) Ltd.Stockport, Cheshire, EnglandPh: 44-161-487-5900http://uk.leco-europe.com
VietnamLECO Vietnam, Co., LTDHo Chi Minh City, VietnamPh: 8428 3851 2886www.leco.com
Page 1 of 1 3/09
®
Consumable Order Form1-800-292-6141 • [email protected] • www.leco.com
To place an order, complete and fax to: 269-982-8977 Contact Name ____________________________ LECO Acct No. ______________________
Phone _______________ Fax _______________ email _____________________________
Ship To _____________________________
___________________________________
___________________________________
___________________________________
___________________________________
Bill To ______________________________
___________________________________
___________________________________
___________________________________
___________________________________
Method of Payment ❒ Tax Exempt ❒ Purchase Order (Number) _________________
❒ Credit Card (Number) _____________________________ Exp. Date ______________
Name of Cardholder __________________________________________________________
Shipping ❒ Prepay & Charge ❒ COD
❒ Collect (if UPS or FED-X, your collect account number is required) __________________
Freight Method ❒ UPS ❒ UPS Next Day ❒ UPS 2nd Day
❒ Other __________________________________________________________________
❒ Ship Complete ❒ OK to ship partial
LECO Part No. Description Qty. Price
❒ Order Confirmation Requested
Terms Net 30 • FOB St. Joseph, Michigan