VIDYAVARDHAKA COLLEGE OF ENGINEERING · 2018-07-26 · Subject code 10ES42 Course code C210 COURSE OUTCOMES CO1 Distinguish between different architectures like CISC & RISC, Harvard

VIDYAVARDHAKA COLLEGE OF ENGINEERING P.B. No.206, Gokulam, III - Stage, Mysuru - 570 002, Karnataka, INDIA.

Phone: +91 821 4276230 / 231.

DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

----------------------------------------------------------------------------------------------------------------

Course Name Engineering Mathematics-III

Subject code 10MAT31

Course code C201

COURSE OUTCOMES

CO1 Apply Fourier series towards technical field and Solve integral equations using

Fourier Transform.

CO2 Derive and obtain the solutions of standard PDE. Find the solutions of numerous

boundary value problems of engineering such as conduction of heat, transverse

vibration of a string and etc.

CO3 Apply least square method to fit various curves for the given data and interpret the

relation, get familiar with the advent of high speed digital computers and increasing

demand for numerical answers to various problems, numerical techniques.

CO4 Apply various numerical techniques to obtain the solution of PDE.

CO5 Apply Z-Transform to obtain the solution of difference equations.

COURSE OUTCOME MAPPING WITH POs and PSOs

COs PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3

CO1 3 3 1 1 2 2

CO2 3 3 1 1 1

CO3 3 3 1 1 2 2

CO4 3 3 1 1 2 2

CO5 3 3 1 1 2 2

AVG 3 3 1 1 1.8 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Analog Electronic Circuits

Subject code 10ES32

Course code C202

COURSE OUTCOMES

CO1 Analyze diode circuits as rectifiers, clipping and clamping circuits.

CO2 Analyze and design simple BJT and FET amplifiers.

CO3 Classify power amplifiers based on power dissipation, efficiency and harmonic

distortion.

CO4 Select the type of oscillators for particular application.



CO1 3 3 3 2

CO2 3 3 3 2

CO3 3 3 3 2

CO4 3 3 3 2

AVG 3 3 3 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Logic Design

Subject code 10ES33

Course code C203

COURSE OUTCOMES

CO1 Understand principles of combinational logic circuits and Apply the Knowledge of

K-map, Q-M method, and MEV method for simplification of Boolean expression

CO2 Analyze and design combinational logic circuits based on given specifications.

CO3 Analysis of various flip-flops used as data storage element

CO4 Analyze and design sequential digital circuits like registers, counters

CO5 Apply the knowledge of Mealy and Moore models for the analysis and design of

synchronous sequential circuits



CO1 2 3

CO2 3 3 3 3

CO3 2 3 2

CO4 3 3 3 3

CO5 3 3 3 3

AVG 2.6 3 3 2.75


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Network Analysis

Subject code 10ES34

Course code C204

COURSE OUTCOMES

CO1 Acquire the basic concepts of electrical science to solve any complex electrical networks.

CO2 Analyse the problem and evaluate the data using graph theory..

CO3 Compute voltage or current for the complex networks by using various network theorems.

CO4 Design an electrical circuit to achieve resonance at desired frequency

CO5 Evaluate the parameters to determine current & voltage of two port network.

CO6 Solve the electrical networks under various responses by applying Laplace Transforms.



CO1 2 2 2

CO2 3 2

CO3 2 3 3

CO4 3

CO5 3

CO6 3

AVG 2 3 3 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Electrical & Electronic Measurements & Instrumentation

Subject code 10EE35

Course code C205

COURSE OUTCOMES

CO1 Identify and select the suitable bridges for the measurement of resistance, inductance

and capacitance.

CO2 Analyze the operation of CT and PT and design of shunts and multipliers used for the

extension of instrument ranges.

CO3 Compare the working principles, merits and demerits of different types of indicating

and integrating instruments.

CO4 Identify error sources and explain how their effects can be minimized in particular

measurement situations.

CO5 Explain the operation of various types of transducers, signal generators, function

generators, display devices and their applications.

CO6 Describe various types of units, standards of measurement and the methods of

measuring circuit parameters, power, voltage, current, phase and frequency using

analog and digital meters.



CO1 ` 2 2

CO2 3 3 2

CO3 2 2 2

CO4 2 2 2

CO5 2

CO6 2

AVG 2.16 2.25 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Electrical Power Generation

Subject code 10EE36

Course code C206

COURSE OUTCOMES

CO1 Discuss about the different sources available for electrical power generation.

CO2 Analyse the process involved in generating electrical power using different sources and their

environmental issues.

CO3 Explain the importance of economic aspects in power generation.

CO4 Acquire knowledge about the effects of power factor in setting up the tariff and its improvement.

CO5 Explain the operation of a substation, its types, and different Bus bar schemes in a substation.

CO6 Summarize the importance of grounding systems and different types of grounding in power system

engineering.



CO1 2 2 2 1

CO2 2 3 2 1 2

CO3 2

CO4 2 2

CO5 2

CO6 2 2 1 2

AVG 2 2 2.5 2 2 1 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Analog Electronics Lab

Subject code 10ESL37

Course code C207

COURSE OUTCOMES

CO1 Design and test diode clipping ,clamping circuits and rectifier circuits.

CO2 Solve DC circuits using Thevenin’s and maximum power transfer theorem.

CO3 Analyze the characteristics of series and parallel resonant circuits.

CO4 Obtain the frequency response of BJT RC-Coupled Amplifier and Emitter Follower.

CO5 Design and generate sustained oscillations for RC and LC Oscillators.



CO1 3 3 3 2 2

CO2 3 3 3 2 2

CO3 3 3 3 2 2

CO4 3 3 3 2 2

CO5 3 3 3 2 2

AVG 3 3 3 2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Logic Design Lab

Subject code 10EEL38

Course code C208

COURSE OUTCOMES

CO1 Demonstrate the knowledge of Boolean laws and K-map for simplification of

Boolean expression.

CO2 Use universal gates and ICs for code conversion and arithmetic operations.

CO3 Verify various flip-flops used as data storage elements.

CO4 Design and demonstrate sequential digital circuits like registers and counters



CO1 3 2 2 1 2

CO2 3 2 2 2 2

CO3 3 2 2 2

CO4 3 2 2 2 2 2

AVG 3 2 2 2 1.75 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Engineering Mathematics-IV

Subject code 10MAT41

Course code C209

COURSE OUTCOMES

CO1 Employ different numerical methods to solve the ordinary differential equations of

first and second order, simultaneous ODE of first order

CO2 Apply the concept of function of complex variables in various fields. Develop problem

solving skills using Cauchy-Reimann equation and apply of Cauchy – Reimann

equation to solve flow problems in electric field. Understand Cauchy’s theorem and

Cauchy’s integral formula to evaluate complex integrals.

CO3 Apply special functions like Bessel function to solve the boundary value problems with

axial symmetry and Legendre polynomial to solve boundary value problems with

spherical symmetry.

CO4 Use the knowledge of probability and be familiar with various probability distributions

which enable to fit a mathematical model to the given data. Apply Baye’s rule to find

the posteriori probability when the apriori probability is known.

CO5 Employ the concept of population, sample, Sampling and to draw inference about

population based on numerical data obtained from the sample using Student’s t- test

and Chi-square test



CO1 3 3 1 1 2

CO2 3 3 1 1 1

CO3 3 3 1 1 1

CO4 3 3 1 1 2 2

CO5 3 3 1 1 2 2

AVG 3 3 1 1 1.6 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Microcontroller

Subject code 10ES42

Course code C210

COURSE OUTCOMES

CO1 Distinguish between different architectures like CISC & RISC, Harvard & von

Neumann, 8255, 8051 and MSP430 microcontroller families.

CO2 Analyse the complete architectural behaviour of 8051, MSP430 and its internal

operations.

CO3 List the complete instruction set available for programming 8051 and MSP430

microcontroller with its functionality.

CO4 Apply logical thinking skills for writing programmes in C as well as assembly level

language for different applications .

CO5 Perform design based calculations for timing and counting operations using 8051 and

MSP430



CO1 3 3 3 3

CO2 3 3 3 3

CO3 3 3 1 3 3 3

CO4 3 3 3 3 3 3

CO5 3 3 3 1 3 2

AVG 3 3 3 1 3 3 2.66


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Control Systems

Subject code 10ES43

Course code C211

COURSE OUTCOMES

CO1 Understand mathematical modeling for simple mechanical & electrical systems by

applying block diagram reduction techniques & Signal Flow Graph.

CO2 Analyze the given first & second order systems under time & frequency domain.

CO3 Evaluate the stability of the system with the aid of Bode Plots, Nyquist Plot &

Root Locus.

CO4 Evaluate the state variables & obtain the solution for state equations.



CO1 3 3 2

CO2 3 3 3 3

CO3 3 3

CO4 3 3

AVG 3 3 3 3


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Field Theory

Subject code 10EE44

Course code C212

COURSE OUTCOMES

CO1 Interpret Electric and Magnetic field properties with Gauss’ law, Divergence, Curl and

Maxwell’s Equation.

CO2 Analyze boundary conditions for static electric and magnetic fields.

CO3 Evaluation of potential, Current, current density and Energy for Static Electric and

Magnetic Field.

CO4 Estimate Force between differential current elements, current to Steady electric and

magnetic field.

CO5 Analyze of magnetization for the simplification of potentials, permeability and mutual

inductance in magnetic fields.

CO6 Illustrate uniform plane waves, its boundary condition and categorize reflection of

uniform plane waves under different medium.



CO1 3 3 1

CO2 3 3 1

CO3 3 3 1 2

CO4 3 3 1 2

CO5 3 3 1 2

CO6 3 2 1

AVG 3 2.8 1 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Power Electronics

Subject code 10EE45

Course code C213

COURSE OUTCOMES

CO1 Understand the different types of power semiconductor devices.

CO2 Analyze different gate and base drives for power devices.

CO3 Analyze and compare natural and forced commutation techniques.

CO4 Analyze the working of power electronic converters for different loads.

CO5 Identify protective circuits and select suitable remedial measures for a given

application.



CO1 2 3 2 2 2

CO2 3 3 2 2 2

CO3 3 3 2 2 2

CO4 2 3 2 2 2

CO5 2 2 2

2

2

AVG 2.4 2.8 2 2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Transformers And Induction Machines

Subject code 10EE46

Course code C214

COURSE OUTCOMES

CO1 Identify the type of transformers and induction machines, and describe its construction,

principle, operation and various tests conducted on it.

CO2 Determine the performance of transformer and induction motors.

CO3 Identify various type of connections of transformers and determine load sharing.

CO4 Identify the methods of starting and speed control of three-phase induction motors.

CO5 Select a suitable type of transformer and induction machine for a given application.



CO1 3 2

CO2 3 2 2

CO3 3 1 2

CO4 2 2

CO5 2 2

AVG 2.6 1.5 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Microcontroller Lab

Subject code 10ESL47

Course code C215

COURSE OUTCOMES

CO1 Analyze the given problem and solve with simplified approach.

CO2 Perform design based calculations to arrive at the output.

CO3 Write assembly language program to arrive at the output.

CO4 Write C program to solve the given problem.

CO5 Interface hardware with software and make the external device to operate.

CO6 Debug the programs written in C and Assembly language program.



CO1 3 3 1 3 2 2 2

CO2 3 3 2 1 3 3 2 2

CO3 3 3 2 2 3 3 2 2

CO4 3 3 2 2 3 3 2 2

CO5 3 3 2 2 3 2 2

CO6 2 2 2 2 3 2 2

AVG 2.8 2.8 1.8 1.8 3 2.5 2 2


Phone: +91 821 4276230 / 231.


---------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Analyze the input/output characteristics for MOSFET, IGBT and SCR.

CO2 Demonstrate the speed control of Universal motor and DC motor using power devices.

CO3 Analyze natural and forced commutation techniques using SCRs.

CO4 Demonstrate the application of AC voltage controllers for different loads.

CO5 Demonstrate the working of Controlled Rectifiers and inverters for different loads.


Course Name Power Electronics Lab


Course code C216


CO1 2 2 2 2 2

2

CO2 3 3 2 2 2

2

CO3 3 3 2 2 2

2

CO4 3 3 2 2 2

2

CO5 3 3 2 2 2

2

AVG 2.8 2.8 2 2 2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Illustrate the management functions and importance of planning

CO2 Categorise the types of organizations, nature of directing, and steps in controlling of

the organization

CO3 Discuss the evaluation and concept of entrepreneurship and intrapreneurship

CO4 Analyse the objectives of SSI and impact of globalization on SSI

CO5 Justify the need and significance of project management with report of different study

techniques

CO6 Compare the different schemes and institutional support for startups or SSI


Course Name Management And Entreprenuership

Subject code 10AL51

Course code C301


CO1 2 2

CO2 2 1 1 1

CO3 1

CO4 2 2 2

CO5 3 3 3

CO6 2

AVG 1.4 1.2 1.6 1.2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Signals And Systems

Subject code 10EE52

Course code C302

COURSE OUTCOMES

CO1 Identify the signals as continuous time, discrete time, even, odd, periodic, nonperiodic,

energy and power signals.

CO2 Solve CT and DT signals in time domain using different techniques like convolution,

Fourier Transform and Z transform

CO3 Analyse the behavior of signals in different domains through predefined properties

CO4 Apply initial conditions to solve difference and differential equations

CO5 Evaluate the properties of systems to identify the for its stability, causality, time

invariance etc.,

CO6 Determine transfer function & frequency response of continuos time and discrete time

signals



CO1 2 3 1

CO2 2 3 3 2 2 2

CO3 1 3 2 2

CO4 1 3 2 3

CO5 3 1 1 2 3

CO6 2 2 2 1 2 1 2

AVG 1.33 2.33 1.5 1.5 1 0.16 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Understand a typical transmission and distribution scheme and the effect of high

voltage application in power transmission system.

CO2 Design a transmission line with appropriate sag and tension satisfying all constraints

CO3 Distinguish and compare different types of insulators and use insulators as per the

requirement

CO4 Analyze the effect of corona losses in transmission system for efficient design and use

Underground cables for distribution.

CO5 Evaluate transmission line parameters, performance of transmission lines based on

voltage and distance

CO6 Design radial or ring main distribution system.


Course Name Transmission And Distribution

Subject code 10EE53

Course code C303


CO1 2

CO2 3 3 3 3

CO3 2 2 3

CO4 2 3 2 2 2

CO5 3 3 3

CO6 3 2 3 3

AVG 2.5 2.75 2.75 2 2 3 2.67


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name DC Machines And Synchronous Machines

Subject code 10EE54

Course code C304

COURSE OUTCOMES

CO1 Describe aspects of constructional details, principle of operation, and performance

of DC Machines and A.C. Machines

CO2 Describe an understanding of the fundamental control practices associated with AC

and DC machines

CO3 Explain the construction and operation of Synchronous machines and evaluate the regulation

of synchronous machines by different methods.

CO4 Analyze and assess the performance characteristics of DC motors by conducting suitable tests

CO5 Select appropriate electrical machines based on characteristics and applications.



CO1 3 2 3

CO2 2 2 3

CO3 2 2 2

CO4 3 2 2

CO5 2 2 2

AVG 2.4 2 2.4


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Modern Control Theory

Subject code 10EE55

Course code C305

COURSE OUTCOMES

CO1 Analyze and design of state model of linear system, interpretation of state model and transfer

function

CO2 Solve for Eigen values and Eigen vectors for stability analysis of linear System.

CO3 Deduce the solutions to state equation, and Analyse the stability of linear system through

controllability and observability

CO4 Inspection of pole placement for the stability analysis of linear system and necessary condition

for pole placement through kalman’s, Gilbert’s test, state observer and state controller

CO5 Analyze basic controller, integration of controllers and generalization of non linear systems and

its behavior.

CO6 Illustrate phase plane methods and liapnov’s criterion for non linear system stability analysis



CO1 3 3 1 1 3

CO2 3 3 1 2

CO3 3 3 1 1 2

CO4 3 3 2

CO5 3 2 1 1

CO6 2 2

AVG 2.83 2.66 1 1 1.8


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Linear Integrated Circuits And Applications

Subject code 10EE56

Course code C306

COURSE OUTCOMES


CO1 Analyze the working of an Op-amps as AC amplifiers

CO2 Analyze frequency response and compensation techniques of op-amps.

CO3 Apply op-amps in signal processing circuits and non-linear circuits.

CO4 Construct active filters and signal generators using Op-amps.

CO5 Design Op-amps circuits as DC voltage regulators, IC filters, PLL and Power

amplifiers.


CO1 2 2 3 3

CO2 2 2 1 3

CO3 3 2 2 2

CO4 3 2 3 3

CO5 3 2 3 3

AVG 2.6 2 2.4 2.8


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Measurements And Circuit Simulation Laboratory


Course code C307

COURSE OUTCOMES

CO1 Acquire ability to perform accurate measurements of electrical quantities using

measuring instruments.

CO2 Design and analyze the performance of the various electronic circuits for the given

specifications using PSPICE software.

CO3 Verify the theoretical and analytical results using experimental setup for the

measurement of Active power, Reactive Power, and Power Factor.

CO4 Identify and select suitable AC bridges and DC bridges for the measurements of

electrical circuit parameters.

CO5 Calculate the different errors of the equipment and understand the necessity of

calibration.

CO6 Demonstrate basic communication skills by working in groups on laboratory

experiments and the thoughtful discussion and interpretation of data.



CO1 3 2 2 2

CO2 3 2 3 2 2 2 2

CO3 3 2 2 2

CO4 2 2 2 2

CO5 2 2 2 2

CO6 2 2 2

AVG 2.5 2 3 2 2 2 2 2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Transformers And Induction Machines Laboratory


Course code C308

COURSE OUTCOMES

CO1 Test the polarity of a single phase transformers and determine [4] its performance

through short circuit and open circuit tests or Sumpner’s test if two identical

transformers are available or by direct load test.

CO2 Determine the load shared by single-phase transformers of different KVA rating

connected in parallel and performance of three single-phase transformers connected in

star-delta.

CO3 Demonstrate the Scott-connection used for converting three-phase AC supply to two-

phase AC supply.

CO4 Determine the performance characteristics of single-phase induction motors, three-

phase induction motors and three-phase induction generators by conducting load test.

CO5 Determine the parameters of equivalent circuit and performance quantities of a three-

phase induction motor by conducting no-load and blocked rotor tests.

CO6 Demonstrate the speed control of three phase induction motor by rotor resistance

control method.



CO1 3 2 1 2 2 2 2

CO2 3 1 2 2 2 2

CO3 3 1 2 2 2 2

CO4 2 2 2 2 2 2

CO5 3 2 2 2 2 2

CO6 2 2 2 2 2

AVG 2.7 1.6 1 2 2 2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Power System Analysis And Stability

Subject code 10EE61

Course code C309

COURSE OUTCOMES

CO1 Construct impedance diagram for a given power system.(Application)

CO2 Analyze and estimate fault current and short circuit MVA for a given power system for a

symmetrical faults. (Analyze)

CO3 Illustrate the importance of symmetrical components in solving unsymmetrical vectors

and Construct the sequence network of the power system. (Comprehension and

Synthesis)

CO4 Solve for short circuit current and post fault voltages for the given power system under

different fault conditions with and without reactance like; LG,LLG, LL etc.(Application)

CO5 Classify power system stability and analyze the power system for transient stability

studies. (Comprehension and analysis)

CO6 Examine the performance of induction motor when the supply voltage is unbalanced and

when one line open.(Analysis)



CO1 3 2

CO2 3 3 2 3

CO3 3 3 2 3

CO4 3 3 2 3

CO5 3 3 2 2

CO6 3 3 - 2

AVG 3 2.83 2 2.6


Phone: +91 821 4276230 / 231.


---------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1

Discuss the necessity of power system protection and the different protective devices

available for the same.

CO2 Identify the requirements of circuit breaking and protective relaying in a power system.

CO3 Explain the concept of Zones of Protection, testing of Circuit breakers, DC and AC

circuit breaking, Different protection schemes.

CO4 Summarize the concept of arc production and lightning, their causes and effects and

process involved to interrupt.

CO5 Classify the different types of protective devices, the advancement in their design and

their operation.


Course Name Switchgear And Protection

Subject code 10EE62

Course code C310


CO1 2 1 2

CO2 2 2

CO3 2 2

CO4 2 2 2

CO5 2 1

AVG 2 2 2 2 1 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Switchgear And Protection

Subject code 10EE63

Course code C311

COURSE OUTCOMES

CO1 Select conducting, insulating and magnetic material that used to design electrical

machines.

CO2 Design armature and field of dc machine and evaluate its performance.

CO3 Design of single and three phase transformer considering main dimensions,

windings and cooling system

CO4 Design of induction motor considering stator winding, squirrel cage rotor and phase

wound rotor and evaluate its performance.

CO5 Design of stator and rotor of salient and non salient pole synchronous machine with

the impact of specific Loadings and short circuit ratio.



CO1 2 3

CO2 3 2 3 2 2

CO3 3 2 3 2 2

CO4 3 2 3 2 2

CO5 3 2 3 2 2

AVG 2.8 2 3 2.2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Analyze various signals using the Discrete Fourier transform (DFT), Inverse Discrete

Fourier transform (IDFT) and its properties to commensurate the desired output.

CO2 Apply the concept of FFT to compute DFT and IDFT of Real sequence.

CO3 Design different types of FIR and IIR filters to get the required output based on the

given Input.

CO4 Implement digital filters in a variety of forms:-Direct form I & II, Parallel,

Cascade and lattice structure.


Course Name Digital Signal Processing

Subject code 10EE64

Course code C312

Cos PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3

CO1 3 3 2

CO2 3 3 2

CO3 3 3 3 3

CO4 3 3 2

AVG 3 3 3 2.25


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

Course Name Computer Aided Electrical Drawing

Subject code 10EE65

Course code C313

COURSE OUTCOMES

CO1 Identify the major CAD tools required for Electrical engineering drawing.

CO2 Design and Draw AC and DC winding diagrams.

CO3 Sketch the singe line diagram of a power system as per the Data given with proper

placement of all equipments.

CO4 Sketch the assembly and Sectional view of transformers using AutoCAD.

CO5 Sketch the assembly and Sectional view of electrical machines (AC and DC) using

AutoCAD.



CO1 3 2 1

CO2 2 3 3 2 2

CO3 2 3 2 2

CO4 2 3 2 1 2

CO5 2 3 2 1 2

AVG 2 3 3 2 1 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Determine the performance and load characteristics of DC machines and field current

characteristics of a synchronous motor.

CO2 Demonstrate several tests like Swinburne’s test, Hopkinson’s test, Field’s test and

retardation test, conducted on DC machines.

CO3 Demonstrate the speed control of DC motors by different methods like armature voltage

control, flux control and Ward Leonard method.

CO4 Conduct slip test and determine voltage regulation of an alternator.

CO5 Determine the performance of synchronous generator connected to infinite bus.

CO6 Measure reactance of synchronous generator and calculate currents for different fault

conditions.


Course Name DC Machines And Synchronous Machines Laboratory


Course code C315


CO1 3 1 2

CO2 3 1 2

CO3 3 1 2

CO4 3 1 2 2

CO5 3 2 2 2

CO6 3 2 2 2

AVG 3 2 2 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Demonstrate DC and AC servo motors.

CO2 Design different types of compensators & Controllers obtain its corresponding

frequency response curves.

CO3 Evaluate the stability of the system with the aid of Bode Plots, Nyquist Plot &

Root Locus & compare the same by using Matlab.

CO4 Obtain/Inspect the Response Curves for different damping ratios.


Course Name Control Systems Laboratory


Course code C316


CO1 3 3 3

CO2 2 3 3 3 3 3

CO3 3 3 3 3 3

CO4 3 3 3

AVG 2 3 3 3 3 3 3 3


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Understand the concept of network topology and represent the power

system network by network graph

CO2 Formulate bus admittance matrix and bus impedance matrix for a given

system using algorithms

CO3 Analyze and obtain solution of load flow problem using iterative methods

CO4 Analyze the problem of economic dispatch and obtain the solution of

economic scheduling of thermal and hydrothermal plants

CO5 Obtgain the solution of swing equation by numerical methods and

represent the synchronous machine and load for transient stability

studies.


Course Name Computer Techniques In Power System Analysis

Subject code 10EE71

Course code C401


CO1 2 2

CO2 2 3

CO3 3 3 2 2 3

CO4 3 2 2 2 3

CO5 3 2 3

AVG 2.6 2.4 2 2 3


Phone: +91 821 4276230 / 231.


---------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Discuss the areas of electrical power utilization in domestic and industrial applications.

CO2 Explain the application of electrical power in domestic application such as Heating and illumination.

CO3 Explain the application of electrical power in industrial application such as Extraction and refining of

Metals, Welding, and Traction.

CO4 Identify the need for Electrical power control in Traction systems, methods available and the factors to

be considered for the same.

CO5 Summarise the importance and evolution of hybrid vehicles and their applications.


Course Name Electrical Power Utilization

Subject code 10EE72

Course code C402


CO1 2 2

CO2 2 2 2

CO3 2 2

CO4 2 2

CO5 2 1

AVG 2 2 2 1 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Understand the need for generation of High voltages in laboratories and know

how high voltages are developed, its applications and advantages.

CO2 Understand the procedure involved in generation of different types of High

voltages

CO3 Analyse the behavior of different types of insulators under high voltage

application supported by several theories

CO4 Identify the instruments that can be used for measuring different types of high

voltages.

CO5 Perform various tests on electrical apparatus to know its insulation strength.


Course Name High Voltage Engineering

Subject code 10EE73

Course code C403


CO1 3 3

1

CO2 3 3 1 1

CO3 3 3 1 3

CO4 3 3 2 3

CO5 3 3

AVG 3 3 1 2 2.2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Examine the structure of electrical drive systems and explain its role in various

applications.

CO2 Analyse the operations like starting, braking and transient conditions of ac motor

and dc motor drives.

CO3 Differentiate the classes of motor duty and determine motor current, torque and

power ratings.

CO4 Analyse the power electronic based speed/torque control of ac and dc motor drives.

CO5 Distinguish between the open loop and closed loop operations of variable frequency

drives.

CO6 Apply the knowledge of different types of drives used in overall process of steel

mill, cement mill, paper mill and textile mill.


Course Name Industrial Drives And Applications

Subject code 10EE74

Course code C404


CO1 2 1

CO2 3 3 3

CO3 3 2

CO4 3 1 3 2

CO5 3 1 2

CO6 2 2

AVG 2.7 1.6 2.5 2


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Identify the protection methods to be employed under system failure.

CO2 Demonstrate the working of different types of relays and Verify its characteristics

CO3 Analyse the insulation behaviour under various high voltage application for different

distances.

CO4 Perform tests to know the Breakdown strength of insulators under consideration.

CO5 Measure the distances required between different types of conductors for the given

breakdown strength considering air insulating media.


Course Name Relay And High Voltage Lab


Course code C407


CO1 3 3 3

CO2 3 3 3

CO3 3 3 3

CO4 3 3 3

CO5 3 3 3

AVG 3 3 3 3


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Compute bus admittance matrix for the given electric network

CO2 Develop a program to estimate efficiency and regulation for a given transmission

line

CO3 Develop a program to assess stability of power system

CO4 Develop program to plot power angle curve for a given system

CO5 Analyze power system problem using modern tool


Course Name Power System Simulation Laboratory


Course code C408


CO1 3 3 3 2 3 3

CO2 3 3 2 3 2 3 3

CO3 3 3 3 3 2 3 3

CO4 3 3 2 3 2 3 3

CO5 3 3 3 3 2 3 3

AVG 3 3 2.5 3 2 3 3


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Relate the principles of estimation to prepare the comparative price statement for

electrical estimation

CO2 Design the installation and positioning of equipment for residential/commercial

wiring system

CO3 Verify the methods of installations, and identify reason for the excess recording in

the energy meter.

CO4 Determine the of size of conductor for overhead transmission line, And Estimate the

cost of erecting

CO5 Estimate and compare the indoor and outdoor substations with key diagrams


Course Name Electrical Design Estimation And Costing

Subject code 10EE81

Course code C409


CO1 2 2 1 1 - 1

CO2 3 2 3 3 3 - 3 3

CO3 2 2 1 3 2 3

CO4 2 2 1 2 2 2 2 2

CO5 3 2 1 1 1 2 1

AVG 2.4 2 1.4 1.4 1 1.2 2 1.8


Phone: +91 821 4276230 / 231.


----------------------------------------------------------------------------------------------------------------

COURSE OUTCOMES

CO1 Illustrate the concept of SCADA system, Tie line power flow, real time monitoring of power

system, state estimation and Deduce an expression for frequency deviation in an interconnected

power system .(comprehension and Analysis)

CO2 Develop Automatic Generation and load frequency control for a single area and multi area power

system(synthesis)

CO3 Apply reactive power control scheme to improve the voltage in power system and solve voltage

stability problem (application).

CO4 Identify the importance of unit commitment in a power system and employ unit commitment

algorithm for economic operation of power system (knowledge and application)

CO5 Analyze the power system for security and contingency Analysis.(analysis)

CO6 Evaluate the reliability indices for the power system and perform state estimation.(evaluate)


Course Name Power System Operation And Control

Subject code 10EE82

Course code C410


CO1 2 3 2

CO2 3 3 3 3

CO3 3 3 3 3

CO4 3 3 2 3

CO5 3 3 2 3

CO6 3 3 2

AVG 3 3 2.5 2.7

Documents

VIDYAVARDHAKA COLLEGE OF ENGINEERING · 2018-07-26 · Subject code 10ES42 Course code C210 COURSE OUTCOMES CO1 Distinguish between different architectures like CISC & RISC, Harvard