7

7

6

5**1 7 6

28

3

4

10

9

11

12

109

10

9

7

10

10

10

**Note: On some bikes this 1/4" thick rubber washer is not required nor desired. To determine the best results for achieving the least vibration of your Love Jugs and horn assembly on your particular bike, Install the Vibration Master with and without this rubber washer. A couple of minutes of easy trial and error effort, to determine if you will use the rubber washer (You should see a difference especially at idle ) will insure you the best possible Love Jug's installation, for a lifetime of use. The second 1/4" rubber washer on the front of the unit must always be used.

ITEM NO. DESCRIPTION QTY.1 Love Jug's Stainless Steel Name Plate Bracket 12 New rubber vibration isolators 23 Stainless Steel (not polished) bracket 14 Stainless Steel (polished) cover 1

5** **Rubber disc 1/4" X 1.5" ** 26 5/16" -18 Hex Nut 27 5/16" Split Lock Washer 48 5/16" -18 X 1" Hex Bolt Head 29 5/16" Chrome Acorn Nut 310 5/16" CHROME Split Lock Washer 311 Stainless Steel Insert Bracket (not polished) 112 Your Existing Harley Chrome Horn Bracket 0