1
Vibration Analysis and Reliability Training & Certification Omega Consulng Engineers Pty Limited is recognized by Mobius Instute as an authorized training & examinaon centre to deliver training & cerficaon examinaons in accordance with ISO 18436 & ISO/IEC 17024 — Vibraon Analysis Categories 1-3 & Reliability. Category 1 This training is suitable for those who are new to vibraon analysis or have 6 months experience. The outcome of this training will help you to understand vibraon condion monitoring and how it predicts failures in rotang machines. The course is good for maintenance technicians/engineers and reliability engineers. Maintenance pracces Condion monitoring Principles of vibraon Introducon to vibraon measurement An introducon to the me waveform An introducon to the spectrum An introducon to forcing frequencies Explaining the different vibraon units A brief introducon to phase Data acquision A quick review of data acquision How do we measure vibraon? Where to place the sensor on the machine Understanding axial, radial, vercal, and horizontal readings A quick introducon to mounng the accelerometer and surface preparaon Naming convenons What are routesand how do you create them? Signal processing A quick tour of your analyzer Spectral averaging Vibraon analysis The spectrum analysis process What is resonance – a quick introducon Diagnosing common fault condions Seng alarm limits Date: 18 th to 21 st February 2019 Duraon: 3.5 days Training & 2 hours Exam Day Time Descripon 1 8.00 am — 5.00 pm Training 2 8.00 am — 5.00 pm Training 3 8.00 am — 5.00 pm Training 8.00 am — 12.00 pm Training 4 12.00 pm — 3.00 pm Exam Email: [email protected] Website: www.ocengineering.com.au Tel: +61 8 8447 7737 Category 1 Topics Covered: Send in your expression of interest before 15th January 2019 to [email protected] Locaon will be announced later but will be in one of the Suva hotels For more informaon visit: www.ocengineering.com.au www.mobiusinstute.com

Vibration Analysis and Reliability Training & Certification€¦ · Vibration Analysis and Reliability Training & Certification Omega Consulting Engineers Pty Limited is recognized

  • Upload
    others

  • View
    46

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Vibration Analysis and Reliability Training & Certification€¦ · Vibration Analysis and Reliability Training & Certification Omega Consulting Engineers Pty Limited is recognized

Vibration Analysis and Reliability

Training & Certification

Omega Consulting Engineers Pty Limited is recognized by Mobius Institute as an authorized

training & examination centre to deliver training & certification examinations in accordance with ISO

18436 & ISO/IEC 17024 — Vibration Analysis Categories 1-3 & Reliability.

Category 1

This training is suitable for those who are new to vibration analysis or have

6 months experience. The outcome of this training will help you to understand

vibration condition monitoring and how it predicts failures in rotating

machines. The course is good for maintenance technicians/engineers and

reliability engineers.

• Maintenance practices

• Condition monitoring

• Principles of vibration

• Introduction to vibration measurement

• An introduction to the time waveform

• An introduction to the spectrum

• An introduction to forcing frequencies

• Explaining the different vibration units

• A brief introduction to phase

• Data acquisition

• A quick review of data acquisition

• How do we measure vibration?

• Where to place the sensor on the machine

• Understanding axial, radial, vertical, and horizontal readings

• A quick introduction to mounting the accelerometer and surface preparation

• Naming conventions

• What are “routes” and how do you create them?

• Signal processing

• A quick tour of your analyzer

• Spectral averaging

• Vibration analysis

• The spectrum analysis process

• What is resonance – a quick introduction

• Diagnosing common fault conditions

• Setting alarm limits

Date: 18th to 21st February 2019

Duration: 3.5 days Training & 2 hours Exam

Day Time Description

1 8.00 am — 5.00 pm Training

2 8.00 am — 5.00 pm Training

3 8.00 am — 5.00 pm Training

8.00 am — 12.00 pm Training 4

12.00 pm — 3.00 pm Exam

Email: [email protected]

Website: www.ocengineering.com.au

Tel: +61 8 8447 7737

Category 1 Topics Covered:

Send in your expression of interest before 15th January 2019 to [email protected]

Location will be announced later

but will be in one of the Suva

hotels

For more information visit:

www.ocengineering.com.au

www.mobiusinstitute.com