Upload
vibe-audio
View
227
Download
0
Tags:
Embed Size (px)
DESCRIPTION
2012 Brochure for Vibe Slick Matrix
Citation preview
• Perfect Fi t • Perfect Sound • For Your Car •Perfect Fi t • Perfect Sound • For Your Car •MATR IXMATR IX
CAR
AU
DIO
MA
TR
IX
the ng
R-V1
-V1
-V1
matrix cat 287 x 2106pp 151212_Layout 1 15/12/2011 17:46 Page 3
No matter the vehicle, Slick fits! Slick covers every possible location within the vehicle whether it’s a dash speaker, door speaker or underseat subwoofer enclosure
Slick-FitNo matter the vehicle, Slick fits! Slick covers every possible location within the vehiclewhether it’s a dash speaker, door speaker or underseasubwoofer enclosure
k FSlick-Fit
Connect the passive crossovers included with the component speaker kits to those included with the component woofers. This creates a 3 way system comprising of tweeters, midrange and bass drivers with the correct frequencies sent to each driver via the passive crossovers.
43M
M
• Shallow mount baskets and tweeters with minimal protrusion ensure that the Slick speakers are easily fit behind the factory grills. • Compact amplifiers are small enough to allow fitment under seats, in luggage compartment side panels and even in the glove compartment
Euro fit speaker baskets Slick 6 features a multifit flange that allows installation in many different applications. Slick 4 features snap off mounting lugs to accommodate, 4, 3 or even 2 hole installations
Super slim speaker baskets, High efficiency compact Class D amplifiers and shallow profile bass enclosures provide minimal mounting depths which ensure that the Slick Matrix products fit easily behind existing locations within the vehicle
The Slick Matrix vehicle specific speaker and bass packs come with all you need: mounting brackets, wiring and instructions and even the tools to do the install!
Shallow Mount
Heard Not Seen
Euro-Fit
Complete Kit
Component Speaker Kit
Component Woofers
PowerAmplifiers
SubwooferEnclosure
Slick Matrix Component Speaker kits are the perfect upgrade to your stock speaker. Each kit include tweeters, midrange drivers and crossovers, with kits available in a range of sizes and configurations to ensure easy fitment in your vehicle..
Slick Matrix component woofers include dedicated bass drivers and passive crossovers, with woofers available in sizes to fit any vehicle and give your system levels of bass performance like you’ve never experienced before.
Give your system even more power and control with a separate amplifier. All Slick Matrix amplifiers are compatible with your existing car stereo and will allow you to increase the volume even further without distortion.
The Slick Matrix vehicle specific bass packs are all you need to give your system a one box bass upgrade and add back the energy, excitement and emotion that your music is missing.
MATR IXMATR IXMATR IX
Perfect Fit, Perfect Sound,
Fits Any Car !
www.vibeaudio.co.ukCAT DATE STAMP 141211
matrix cat 287 x 2106pp 151212_Layout 1 15/12/2011 17:46 Page 1
STEP 2
X-OVER
STEP 1
Dual SpiderDual SpiderControl and stability of Control and stability of the cone with high the cone with high power handlingpower handling
Single MagnetSingle MagnetSingle ferrite magnet Single ferrite magnet for high power for high power handlinghandling
Spring TerminalSpring TerminalAllows ease of Allows ease of installation for heavy installation for heavy gauge cablegauge cable
One Piece PP One Piece PP ConeConeFor increased For increased depth and clarity depth and clarity of bassof bass
Inverted SurroundInverted SurroundOffers extended low Offers extended low frequency responsefrequency response
Alloy Torsion BasketAlloy Torsion BasketProvides rigidity and Provides rigidity and support for motor and support for motor and moving partsmoving parts
Rubber GasketRubber GasketEnsures a perfect Ensures a perfect seal when mounting seal when mounting the speakerthe speaker
Magnet BootMagnet BootRemovable rubber Removable rubber boot for magnet boot for magnet protectionprotection
Crossover IncludedThe crossovers of the SLICK matrix range are all designed to work together and can be connected as one. All crossovers are supplied with instructions for each speaker you choose.
Choose your woofers.The Slick woofer kit includes a pair of woofers and a pair of crossovers. Select the appropriate woofer size for your vehicle and connect the passive crossovers to the crossover in your comp kit. This creates a 3 way system comprising of tweeters, midrange and bass speakers with the correct frequencies sent to each speaker.
COMPONENT WOOFERST
Subwoofer
Upgrade
Upgrade
COMPONENT speakersT ComponentComponentWoofer and tweeter that Woofer and tweeter that can be mounted apart can be mounted apart for a better sound stagefor a better sound stage
Inverted SurroundInverted SurroundOffers extended low Offers extended low frequency responsefrequency response
IMPP ConeIMPP ConeRigid polypropelene Rigid polypropelene woofer cone for woofer cone for smooth, low basssmooth, low bass
Alloy Torsion Alloy Torsion BasketBasketProvides rigidity and Provides rigidity and support for motor support for motor and moving partsand moving parts
Spade TerminalsSpade TerminalsAllows ease of Allows ease of installationinstallation
Super SlimSuper SlimShallow Mounting Shallow Mounting DepthDepth
PEI TweeterPEI TweeterOffers extended Offers extended high frequency high frequency responseresponse
Y30 MagnetY30 MagnetSingle Y30 rated Single Y30 rated magnet. Higher magnet. Higher magnet ratings mean magnet ratings mean more powermore power
Y30
Component speaker kits expand on the already hugely successful range of 2 way component speaker kits with an even greater array of sizes ensuring complete compatibility with all vehicle types.
The All NEW Slick when standard sized speakers simply will not. Sizes ranging from 6” to the awesome 15” ensure that there is a subwoofer to suit every car.
PROVIDE THE BASS Choose your component kitThe Slick comp kits includes tweeters, a pair of midrange speakers and a pair of passive crossovers. Simply select the midrange speaker size for your vehicle
65
component kit
2-way
3“ (76mm)
40 watts
120 watts
20 watts RMS
87dB
80Hz - 25kHz
4 Ohms
1.4”(36mm)
2.8”(70mm)
1”(25mm)
Ferrite
3.5oz
Y30
Slick Stereo 2
Slick Stereo 4
component kit
2-way
4“ (100mm)
50 watts
150 watts
25 watts RMS
88dB
66Hz - 25kHz
4 Ohms
1.6”(41mm)
3.7”(93mm)
1”(25mm)
Ferrite
5.3oz
Y30
Slick Stereo 2
Slick Stereo 4
component kit
2-way
5.25“ (130mm)
70 watts
210 watts
35 watts RMS
90dB
60Hz - 25kHz
4 Ohms
1.8”(36mm)
4.5”(114mm)
1”(25mm)
Ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
component kit
2-way
6.5“ (165mm)
80 watts
240 watts
45 watts RMS
91dB
54Hz - 25kHz
4 Ohms
1.7”(44mm)
5.6”(143mm)
1”(25mm)
Ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
t kit
SLICK 3c
component kit
SLICK 4ccomponent kit
SLICK 5ccomponent kit
SLICK 6csubwoofer
1-way
10“ (275mm)
350 watts
1000 watts
175 watts RMS
88dB
30Hz - 1.7kHz
4 Ohms
5”(126mm)
9.1”(232mm)
2.2” 2 layer
Ferrite
50oz
Y25
Slick Bass 1
subwoofer
1-way
12“ (323mm)
400 watts
1200 watts
200 watts RMS
90dB
25Hz - 1.5kHz
4 Ohms
5.2”(133mm)
10.8”(275mm)
2.2” 2 layer
Ferrite
50oz
Y25
Slick Bass 1
SLICK 5w SLICK 6w SLICK 8wbsubw foofer
SLICK s10subwb foofer
SLICK s12woofer
1-way
5.25“ (133mm)
80watts
240 watts
40 watts RMS
90dB
55Hz - 3.5kHz
4 Ohms
2”(51mm)
3.9”(100mm)
1”(25mm)
Ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
woofer
1-way
6.5“ (165mm)
90watts
270 watts
45 watts RMS
90dB
55Hz - 3.5kHz
4 Ohms
2”(51mm)
3.9”(100mm)
1”(25mm)
Ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
woofer
1-way
8“ (203mm)
250watts
750 watts
125 watts RMS
87dB
35Hz - 1.5kHz
4 Ohms
1.4”(36mm)
2.8”(70mm)
2”(51mm)
Neodymium
11oz
N35
Slick Bass 1
865
X-OVER
FFE
R
Component Subwoofers
Model code: SLICK3C-V2 SLICK4C-V2 SLICK 5 COMP SLICK 6 COMP Model code: SLICK5W-V2 SLICK6W-V2 SLICK8W-2 SLICK 10 SLICK 12 -V2 M
matrix cat 287 x 2106pp 151212_Layout 1 15/12/2011 17:46 Page 4
Offers extended low frequency response
POWER AMPLIFIERS
Upgrade
The all new range of micro Slick amplifiers continue the philosophy of easy fitment. The entire range use the very latest Class D topology and extruded heatsinks to provide maximum power from the smallest possible footprint. These amplifiers not only provide more volume than your factory radio could dream of but also offer far superior sound quality, clarity and bass response.
High Pass FilterHigh Pass FilterLimits low frequency Limits low frequency
outputoutput
MicroMicroSmall foot print, Small foot print, Maximum power Maximum power minimum spaceminimum space
Remote GainRemote GainAmplifier gain can be Amplifier gain can be controlled from the front controlled from the front of the vehicle of the vehicle
Bass EnhanceBass EnhanceBoosts EQ to overcome Boosts EQ to overcome road noiseroad noise
Class DClass DHigh efficiency High efficiency amplifier ideal for amplifier ideal for bassbass
MOSFET MOSFET High switching High switching speed and speed and greater stabilitygreater stability
Subsonic FilterSubsonic FilterLimits very low Limits very low frequency outputfrequency output
Low Pass FilterLow Pass FilterLimits the Limits the amount of high amount of high frequency outputfrequency output
For easy connection into a factory headunit VIBE recommend the DeltaBox Line Convertor.
Utilising the patent pending Auto Sense™ technology found in our high end amplifiers. The Deltabox Line Convertor connects to the speaker output of the headunit and provides a
line level signal for the amplifiers and also generates a remote turn on for the amplifier so there is no need to add separate switches or spend hours looking for a switched +12V supply.
The Deltabox Line Convertor can be installed behind the headunit or close to the amplifier.
Inverted SurroundInverted SurroundOffers extended low Offers extended low frequency responsefrequency response
IMPP ConeIMPP ConeRigid polypropelene Rigid polypropelene woofer cone for woofer cone for smooth, low basssmooth, low bass
Alloy Torsion BasketAlloy Torsion BasketProvides rigidity and Provides rigidity and support for motor and support for motor and moving partsmoving parts
PEI TweeterPEI TweeterOffers extended high Offers extended high frequency responsefrequency response
Spade TerminalsSpade TerminalsAllows ease of installationAllows ease of installation
Super SlimSuper SlimShallow Mounting DepthShallow Mounting Depth
Y30 MagnetY30 MagnetSingle Y30 rated Single Y30 rated magnet. Higher magnet. Higher magnet ratings mean magnet ratings mean more powermore power
Y30
coaxial speakers
Slick coaxial speakers are designed from the ground up to make installation simple and provide fantastic sound
EURO FIT Standard
MICRO Slick
4 x 90 watts
N/A
1 x 300 watts
1 x 515 watts
1750 watts
20Hz - 20kHz
0.1%
HPF/LPF/Subsonic
50Hz - 200Hz
2.3” (58mm)
16.5” (420mm)
6.4” (163mm)
5 channel
SLICK CHANNEL 5
2 Channel
2.3” (58mm)
7.9” (201mm)
6.4” (163mm)
2 x 75 watts
2 x 100 watts
1 x 200 watts
N/A
400 watts
20Hz - 20kHz
0.1%
HPF/LPF/FLAT
50Hz - 750Hz
SLICK STEREO 2
4 x 75 watts
4 x 100 watts
2 x 200 watts
N/A
800 watts
20Hz - 20kHz
0.1%
HPF/LPF/FLAT
50Hz - 750Hz
2.3” (58mm)
10.3” (261mm)
6.4” (163mm)
4 Channel
SLICK STEREO 4
N/A
N/A
1 x 400 watts
1 x 600 watts
1200 watts
10Hz - 500Hz
0.1%
LPF/Subsonic
40Hz - 220Hz
8.8” (218mm)
6.4” (163mm)
SLICK BASS 1
2.3” (58mm)
Mono Bass Ampcoaxialcoaxial
2-way
4” (100mm)
50 watts
150 watts
25 watts
88dB
66Hz - 25kHz
4Ω
1.8” (45mm)
3.4” (85mm)
1” (25mm)
ferrite
5.3oz
Y30
Slick Stereo 2
Slick Stereo 4
2-way
3” (76mm)
40 watts
120 watts
20 watts
87dB
80Hz - 25kHz
4Ω
1.4” (36mm)
2.8” (70mm)
1” (25mm)
ferrite
3.5oz
Y30
Slick Stereo 2
Slick Stereo 4
coaxial
2-way
5.25”
70 watts
210 watts
35 watts
90dB
60Hz - 25kHz
4Ω
2” (50mm)
3.9” (100mm)
1” (25mm)
ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
coaxial
2-way
5.25”x7.5”
80 watts
240 watts
40 watts
91dB
54Hz - 25kHz
4Ω
2.1” (54mm)
4.7”x7.1”
1” (25mm)
ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
coaxial
2-way
6.5” (165mm)
80 watts
240 watts
40 watts
91dB
54Hz - 25kHz
4Ω
2.1” (54mm)
5.7” (144mm)
1” (25mm)
ferrite
10oz
Y30
Slick Stereo 2
Slick Stereo 4
coaxial
2-way
6.25”x9.25”
140 watts
420 watts
70 watts
93dB
50Hz - 25kHz
4Ω
3” (75mm)
6.25”x9.25”
1” (25mm)
ferrite
20oz
Y30
Slick Stereo 2
Slick Stereo 4
i l
SLICK 4
i l
SLICK 3
i l
SLICK 5
i l
SLICK 57
i l
SLICK 6
i l
SLICK 692
coaxial
2-way
6.25”x9.25”
140 watts
420 watts
70 watts
93dB
50Hz - 25kHz
4Ω
3” (75mm)
6.25”x9.25”
1” (25mm)
ferrite
20oz
Y30
Slick Stereo 2
Slick Stereo 4
i l
SLICK 693
Adding a Slick amplifier will bring your music to life with more volume, better dynamics and improved bass delivery.
Model code: SLICK3-V4 SLICK4-V3 SLICK5-V3 SLICK57-V1 SLICK6 -V3 SLICK69.2-V2 SLICK69.3-V2
Model code: SLICKSTEREO2 -V1 SLICKSTEREO4 -V1 SLICKBASS1 -V1 SLICKCHANNEL5-V1
matrix cat 287 x 2106pp 151212_Layout 1 15/12/2011 17:46 Page 5
COMPACT ENCLSOURES
e e d e y d ,
rLow Pass Filter
utfrequency output
SLR ENCLSOURES
Acoustic SuspensionAcoustic SuspensionSealed enclosure offers Sealed enclosure offers high power handlinghigh power handling
N-WedgeN-WedgeEliminates negative Eliminates negative effects of sealed effects of sealed enclosure designenclosure design
SLICK 12 COMPACT
One Piece PP ConeOne Piece PP ConeFor increased depth For increased depth and clarity of bassand clarity of bass
Inverted SurroundInverted SurroundOffers extended low Offers extended low frequency responsefrequency response
Rubber GasketRubber GasketEnsures a perfect Ensures a perfect seal when mounting seal when mounting the speakerthe speaker
Active EnclosureActive EnclosureSubwoofer enclosure Subwoofer enclosure with integrated amplifierwith integrated amplifier
TurboportTurboportDual flared port for Dual flared port for smoother airflow and smoother airflow and cleaner basscleaner bass
Bass ReflexBass ReflexPorted subwoofer Ported subwoofer enclosure delivers enclosure delivers boosted bass responseboosted bass response
Active Active EnclosureEnclosureSubwoofer Subwoofer enclosure with enclosure with integrated integrated amplifieramplifier
A.R.B.S.S.A.R.B.S.S.Anti Resonance Bass Anti Resonance Bass Support SystemSupport System
Super SlimSuper SlimShallow mounting Shallow mounting depthdepth
Pressure Wedge 2Pressure Wedge 2Mount facing or away Mount facing or away from passengersfrom passengers
Box GripBox GripSpecially designed carry Specially designed carry handle built into AR.B.S.S.handle built into AR.B.S.S.
Port plug
Port PlugPort PlugAllows easy conversion Allows easy conversion from bass reflex to from bass reflex to acoustic suspensionacoustic suspension
SLICK 8 OPTISOUND
The Slick COMPACT
enclosure
vented
14.1” (359mm)
15.5” (393mm)
12.4” (200mm)
LiteAir 12
4Ω
450 watts
1350 watts
N/A
1
tight bass
PowerBox™ Bass
1 (included)
e
3
15
3
9
nclosure
vented
” (75mm)
10.6” (285mm)
” (380mm)
LiteAir 8
4Ω
00 watts
00 watts
N/A
labyrinth slot port
tight bass
PowerBox™ Bass
1 (included)
Enclosures are designed to work either in conjunction with your existing speakers or as an addition to the Slick speaker upgrades. Ultra shallow 8” enclosures can even be installed under your seat!
Enclosure
Upgrade
SLR 12 ACTIVE
SLR 12TACTIVE
enclosure
sealed
14.2” (360mm)
15.7” (400mm)
15.7” (400mm)
Slick 12
4Ω
400 watts
1200 watts
N/A
N/A
deep smooth bass
PowerBox™
Bass 1
enclosure
VENTED
14.2” (360mm)
31.4” (800mm)
15.7” (400mm)
2 x Slick 12
4Ω
800 watts
2400 watts
N/A
Letter box
deep smooth bass
PowerBox™
Bass 1
Upgrade
SLR enclosures are loaded with the Slick component subwoofers. These enclosures are precisely tuned to extract the best performance from the subwoofer while at the same time minimising the amount of space taken up in the luggage compartment.
The Slick SLR
ACTIVE ENCLOSURE
ERE
The Slick Matrix offers both compact enclosures which are designed to fit into small spaces such as under a seat or rear of seat. The Powerbass SLR enclosures are deliver massive bass without taking up the entire luggage area due to the unique N-wedge enclosure design
For best connectivity use
Model code: LITEAIRC12-V1 LITEAIRAUTO8A-V1 Model code: SLR12A-V1 SLR12TA-V1
VSAWK4-V1 VSAWK8-V1
matrix cat 287 x 2106pp 151212_Layout 1 15/12/2011 17:46 Page 6
MA
TR
IX
Perfect Fit, Perfect Sound, Fits Any Car !System Pack Examples (see online for more)
Honda Civic
Slick Car Packs contain everything you need to upgrade the OEM audio in your car. The components in each Slick pack are chosen to give the best audio performance in your specific vehicle, whilst ensuring easy fitment in existing speaker locations. Slick packs include the mounting brackets, wiring accessories and adapters necessary for fitment making it the easiest way to replace your system with minimal effort.
FRONTFRONTFRONT
REARREARREAR
FRONTFRONTFRONT
REARREARREAR
PACK CONTENTSPACK CONTENTSPACK CONTENTS
PACK CONTENTSPACK CONTENTSPACK CONTENTS
PACK CONTENTSPACK CONTENTSPACK CONTENTS
PACK CONTENTSPACK CONTENTSPACK CONTENTS
PACK CONTENTSPACK CONTENTSPACK CONTENTS
• 1 x pair of 6” woofers with 3 way crossovers• 1 x pair of 4” midrange • 1 x pair of 6” midrange speakers with 2 way crossovers• 2 x pairs of 1” tweeters• 1 x Op�sound 8• 2 x pairs of speaker moun�ng brackets• 1 x tool pack and wiring kit
• 2 x pairs of 6” midrange speakers with 2 way crossovers• 2 x pairs of 1” tweeters• 1 x Op�sound 8• 2 x pairs of speaker moun�ng brackets• 1 x tool pack and wiring kit• Fixings and screws
The one-box solution contains everything you need for your specific car modelCarefully selected components to give the best audio performance with the easiest possible installation. Perfect stealth OEM fitment with aftermarket performance Contains the fitment accessories and wiring required for installation
Bass GeneratorLine convertor
The VIBE Fastplug is a quick release
car amplifier connector.
Ideal for use with active bass
enclosures, The VIBE fastplug
allows fast, safe, convenient removal
for when boot space is required.
IN
CLICK
OUT
!
WARNING :
This product is capable of causing permanent
damage to your subwoofer and audio system.
VIBE will not be held responsible for any damage
caused to your audio system by the misuse of this
product.
Deltabox line convertorThe Deltabox line convertor provides the perfect
solution for integrating your aftermarket amplifier with your OEM headunit.
Not only does the delta box line convertor derive a low level RCA input for your amplifier from the speaker
output of the headunit but thanks to
The easy way to add an amplifier to your
vehicle without changing your
existing headunit.
VIBE's AUTO SENSE technology also provides a remote turn on for your amplifier so there is no need to
add a separate switch or locate an ignition switched +12V supply in the vehicle.
MODEL :DELTABOXLC-V1
MODEL :FASTPLUG MODEL ROLL: AVSDR-V1
MODEL 2PCS: AVSD2-V1
MODEL :DELTABOXBG-V1
11
• 2 x pairs of 5” midrange speakers with 2 way crossovers• 2 x pairs of 1” tweeters• 1 x pair of 6”x9” speakers• 1 x Op�sound 8• 1 x pair of speaker moun�ng brackets• 1 x tool pack and wiring kit• Fixings and screws
• 2 x pairs of 5”x7” coaxial speakers• 1 x Op�sound 8• 1 x tool pack and wiring kit• Fixings and screws
• 1 x pair of 6” midrange speakers with 2 way crossovers• 1 x pair of 1” tweeters• 1 x pair of 6” coaxial speakers• 1 x Op�sound 8• 2 x pairs of speaker moun�ng brackets• 1 x tool pack and wiring kit• Fixings and screws
VW Golf
Audi A3
BMW Mini
Ford Fiesta
FRONTFRONTFRONT
REARREARREAR
FRONTFRONTFRONT
REARREARREAR
FRONTFRONTFRONT
REARREARREAR
EXTREMEBASS
matrix cat 287 x 2106pp 151212_Layout 1 15/12/2011 17:46 Page 2