Vetec Catalogue 2015

Vetec Aps • DenmarkPhone +45 65 90 58 02 • Fax. +45 65 91 88 02Email. [email protected] • www.vetec.dk

Vetec Asia Pacific Pte. ltd • SingaporePhone +65 6884 4002 • Hp. +65 8127 9082Email. [email protected] • www.vetec.sg 1

PRODUCT CATALOGUE DATA SHEETS

HIGH QUALITY WEIGHING AND OVERLOAD SOLUTIONS FOR HOISTS AND CRANES

STANDARD & CUSTOM-DESIGNED SOLUTIONS CONSTRUCTION, OFF-SHORE, MARINE & HARBOURS, WIND ENGERGY, AGRICULTURE AND TRANSPORT

Vetec Aps • Denmark - Phone +45 65 90 58 02 • Fax. +45 65 91 88 02 - Email. [email protected] • www.vetec.dk2

Content:

Dynamometer 3Handheld Display 4Mechanical Overload Switch 5Weighing & Overload System WT1 6Heavy duty Weighing & Overload System WT3 7Running Line Tensiometer 8Offshore Dynamometer 9Shackle Pin 10Load Pin Series 11Large Displays 12 Panel Meter 13Equilised Junction Box 14S Cell - Low capacity 15S Cell - High capacity 16Pressure Transducer 17Comp Cell 18Bellows Bending Beam 19ET Stainless Series 20Bolt-on 21 Tiger G2 22Transmitters (Tiger) 23Receivers (Tiger) 24

Vetec Aps • Denmark - Phone +45 65 90 58 02 • Fax. +45 65 91 88 02 - Email. [email protected] • www.vetec.dk 3

Specifications:

Applicationareas: Underhookcraneweighing.Craneandhoistcalibration andproofloadtesting.Capacity: 2T-120T.Accuracy: >0,2%.Safeoverload: 120%Materials: Highstrenghtsteel. Silverchromeplatedsurface.Charger: NIMH,4-10cell.IPclass: IP64Display: BrightLEDBatteries: AA1,5V(rechargeable)Operatingtime: 8-14hoursOperatingTemp: –20°C to +40°C

ItemNo:Capacity Dimensions Boltdia. WeightIncrement (T) (LxWxH) (mm) (kg) (kg)D2000-ALU-2T 2 200 x 100 x 66 20 1,20 1D2000A-6T 6,5 220 x 95 x 75,4 30 3,30 5D2000A-12T 12,5 250 x 95 x 83 35,5 4,55 10D2000A-25T 25 340 x 108 x 83 51,0 7,60 10D2000A-55T 55 440 x 160 x 94,4 73,0 19,10 50D2000A-120T 120 500 x 200 x 120,2 100,0 39,50 100

DynamometerD2000A

• Accuracy higher than 0,2% FS• Very clear red digit LED display / Visible at long distances and in

bright daylight• Compact size / high strenght steel• Fully serviceable parts• Built-in rechargeable batteries• Very easy to use• Available ex. stock ( DK )

Accessory options:

• Handheld display (2000B-6V-RTX).

• PCdatalogsoftware(DYNALOG)


Specifications:

Applicationareas: ForusewithVetecDynamometeronlyRange: Upto15minopenrangeNumberofchannels: 4+4Standardfrequency: 869.7500MHz(otherfrequenciesavailable)Communicationform: OnewayRFoutputpower: 5mWOperatingtime: 8-14hoursOperatingtemp.: –20°Cto+65°C.Batteries: AA1,5V(rechargeable)Charger: NIMH,4-10cell.(asDynamometer)Dimensions: L190xW104xH65Weight: 0,4kg.

• Handheld display for Vetec Dynamometer• Enables the measurements to be read from long distances and from

moving objects• Up to 8 Dynamometers with handheld display can be used in the

same area.• 8 frequencies, all in the 868-869 MHz area • Very easy to use

Handheld Display2000B-6V-RTX


Mechanical Overload SwitchSM4067 & SM4068

Specifications

Applicationareas: Loadlimitationofhoistingdevices,cranesand overheadcranes.Suitableforavarietyofindustrial environments,includinghigh-temperatureanddusty environments.

Dimensions: W70xH145xL150Operatingtemp.: 0-80°CBelow0°Caheatingdeviceisrecommended.Materials: Housing: Nickelplatedsteel. Springs: Heattreatedspringsteel,accordingto GB/T 13304. Axles: CK45.Hysteresis: Max,4%FS

ItemNo:Wire Capacity WeightSM4067-2 6-13mm 500-1500kg.perreeving 2,45kgSM4067-4 6-13mm 1500-3000kg.perreeving 2,80kgSM4067-6 6-13mm 3000-5000kg.perreeving 3,15kg

SM4068-2 13-20mm 500-1500kg.perreeving 2,45kgSM4068-4 13-20mm 1500-3000kg.perreeving 2,80kgSM4068-6 13-20mm 3000-5000kg.perreeving 3,15kg

Switch: UI: 500V Utilisator: AC-15:230V/4A DC-13:24V/1A UL listed. IEC 60947-5-1

• Minimal lifting height reduction (only 150mm lenght)• Quick and precise installation with simple tools• Mounted on the dead end af the wire rope• An opening to the spring makes it possible to see when the

switch is adjusted correctly• Can be adjusted to fit different wire sizes and kg/ton• Avalible ex. stock (DK)

Accessory options:

• 2 limit switches


Specifications:

Applicationareas: Combinedloadindicationandloadlimitationsystem forhoistingdevices,cranesandoverheadcranes.Accuracy: <1%FS.OnUnit: 0,1%Mounted: 0,1%xwirediameterx2.Output: 2,0NomMV/VBalancedsignalCapacity: 5TonunitxreevingsforcranecapacityWireSize: 6-15mmMaterial: Alu7075Temperature: 0,0011MV/CInput: EXC.5-10VDCDimensions: L100mmxW62mmxH65mmWeight: 0,8kg.Cable: 3m.(Upto15masoption)

• Electronic Clamp-on solution for wire 6-15 mm. • Accuracy < 1% FS & overload protection• Universal fit• Minimal lifting height reduction / Compact size (L100 mm)• Quick and easy to install on the dead end of the wire rope• Available ex. stock (DK)

Note: A complete system consists of a WT1-N and an amplifier

Accessory options :

• Amplifier(OL3000A)• Localorremotedisplaywith

built-inamplifier• Remotecontrol(Tiger)• Forsomewiretypesa

compensationkitisrecom-mendedtoachieve<1%accuracy

Weighing & Overload SystemWT1-N


Heavy duty Weighing & Overload SystemWT3

Specifications FullLoadOutput: 1.0nommV/VZeroLoadOutput: <±5.0%Excitation(Max): 10(15)VAccuracy: <1 %FSRepeatability: <0,25%InputResistance: 375(±20)ΩOutputResistance: 350(±2)ΩCompensatedTemp.Range: 0to+60°COperatingTemp.: -10to+80°CTemp.CoefficientonZero: <0.0010%Capacity/°CTemp.CoefficientonSpan: <0.0010%Capacity/°CSafeOverload: 150 %Insulation: >500@100VdcMΩIPclass: IP68

ItemNo: Wire(mm) Load(kg)WT3-8-10 8-10 750WT3-11-13 11-13 1700WT3-14-16 14-16 3000WT3-18-19 18-19 4000WT3-20-22 20-22 5700WT3-24-26 24-26 7000WT3-27-28 27-28 9700WT3-29-32 29-32 12600WT3-33-35 33-35 15100WT3-36-38 36-38 17900

188 mm

27 m

m

45 m

m

80 m

m

25 mm

ATEX/IECExApprovedtoEx ia IIC T6

Ex tD A20 IP68 T85C

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

Specifications subject to change without notice

• Electronic Clamp-on solution for wire 8-38 mm.• Accuracy <1% FS & overload protection• Quick and easy to install on the dead end of the wire rope• Stainless steel construction

Note: A complete system consists of a WT3 and an amplifier

Accessory options:

• Amplifier(OL3000A)• Localorremotedisplay

withbuilt-inamplifier• Remotecontrol(Tiger)• Otherrangesavailableonrequest• Atexapprovalavailable.


Running Line TensiometerRLT

Specifications

Applicationareas: Combinedloadindicationandloadlimitationsystem forcranesandhoistswithmovingwires.

Capacity: 1-1000T.Accuracy: Downto1%.Wiresize: 10-38mmOutputsignal: 1mv/vatfullloadIPclass: IP67Relativehumidity: >98%Operatingtemp.: –20°Cto+60°C.Under0°Cthefreemovementsofthe wheelsmustbeobserved

ItemNo. Wire A B C Weight (mm) (mm) (mm) (mm) (Kg)RLT 13 13 720 225 180 14,5RLT 16 16 720 225 180 21,5 RLT 19 19 720 225 180 21,5 RLT 22 22 810 270 186 37RLT 25 25 810 270 186 37RLT 28 28 810 270 186 37RLT 32 32 963 297 188 56 RLT 35 35 963 297 188 56 RLT 38 38 963 297 188 56

• Weighing and overload system for moving wires• Heavy duty ball bearing construction• Hardened stainless load pin• 3 standard housing models• Wide assortment of mounting accessories

Note: A complete system consists of a running line and an amplifer

Accessory options:

• Amplifier(OL3000A)• Localorremotedisplaywith

built-inamplifier.• Payoutcounter• Availableingalvanisedsteelfor

corrosiveenvironments.• MountingArm

Item No. D (mm)

E (mm)

Weight (kg)

RLT MOUNTING ARM 1

810 1270 11

RLT MOUNTING ARM 2

850 1320 11

RLT MOUNTING ARM 3

850 1320 15


Item No. D (mm)

E (mm)

Weight (kg)

RLT MOUNTING ARM 1

810 1270 11

RLT MOUNTING ARM 2

850 1320 11

RLT MOUNTING ARM 3

850 1320 15

Offshore DynamometerD2000E

Specifications

Applicationareas: Underhookcraneweighing.Craneandhoist calibrationandproofloadtesting.Capacity: 1-500TAccuracy: <0,5%FullLoadOutput: 1,0nom.mV/VZeroLoadOutput: <1%Excitation(Max): 10(15)VRepeatability: <0,10%InputResisteance: 750ΩOutputResistance: 700ΩIPclass: IP66.IP67asoptionCompensatedTemp.Range: 0to+70°COperatingtemp.: –20°Cto+80°C.Temt.CoefficientonZero: <0,030%Capacity/°CTemp.CoefficientonSpan: <0,0050%Capacity/°CSafeOverload: 150%Insulation: >500@100VdcMΩ

Item No Capacity A B C D E Weight (T) (mm) (mm) (mm) (mm) (mm) (Kg) D2000E-5T-S 5 108 105 40 30 164 1,4 D2000E-12T-S 12 120 105 40 38 210 1,9 D2000E-25T-S 25 131 125 55 53 255 4,0 D2000E-35T-S 35 147 135 55 60 305 5,0 D2000E-50T-S 50 170 150 75 73 345 9,0 D2000E-100T-S 100 228 220 123 100 455 27,0 D2000E-250T-S 250 330 304 189 145 680 87

• Telemetry• Aluminium / very compact size• Black eloxed aluminium surface• IP66. IP67 as option• Range 200 m• For use with standard shackles

NOTE: The Dynamometer is as standard provided with hand-held display and suitcase.

Options:

• Otherrangesavailableonrequest• CabledVersion


Shackle PinSHA-PIN

SpecificationsCapacities: 5,10,25,50,100,250TFullLoadOutput: 1.0nom.mV/VZeroLoadOutput: <±0.004%Excitation(Max): 10(15)VAccuracy: <0.5%Repeatability: <0.10%InputResistance: 375 ΩOutputResistance: 350 ΩCompensatedTemp.Range: +20to+60°COperatingTemp.Range: -30to+70°CTemp.CoefficientonZero: <0.050%Capacity/°CTempCoefficientonSpan: <0.030%Capacity/°CSafeOverload: 150 %Insulation: >500@100Vdc MΩIPclass: IP68

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

A C

BT

L

O

Capacity(T) A B C D L T 5 120 60 25 30 90 45 10 150 76 32 35 110 50 25 225 106 45 50 170 75 50 325 145 68 70 150 105 100 420 203 92 95 350 130 250 625 305 115 127 475 215


Ex tD A20 IP68 T85C


• Stainless steel pin & bobbin• Greenpin Shackles• 4-20 mA output• Telemetry and cabled version

Options:

• Other ranges available on request

• Atex certification


Load Pin SeriesInternally gauged pins

SpecificationsCapacities: 0.1to1000+ TProofLoad: 150 %ofratedloadUltimatebreakingload: 500 %ofratedloadBridgeResistance: 350/700/1000 ohmsExcitation: 5to10 Volts(dc)Output: 1.0to1.5 mV/VNon-Linearity: ±1% typicalNon-Repeatability: ±0.04% optimumIPclass: IP67OperatingTemp.Range: -20to+70 °CTemp.CoefficientonZero: <0.02 %Capacity/°CTempCoefficientonSpan: <0.02 %Capacity/°CSignalcable: 5mpolyurethane4core

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

Designed specifically for customers requirements as direct replacement for shackles and load bearing pins in lifting equipment

LOAD

BEARING SHEAVE BEARING


• Range 0,1 T to 1000 T• Sealed to IP68• Low deflection• Ideal for direct swap installation• Stainlees steel construction

Options:

• Specialanti-rotation/lockingplates

• InternalgreasewaysPlug/Socketbreakdownatpin

• Secondredundancygaugebridge

• Internalsignalamplifier WitnessbyLloydsReg.OfShipping, ABS etc.

• SingleshearpinsFullyWelded• Submersible• ATEXapproval


Large DisplaysD1002/4-L and D1004/4-L

Display functions• Total• Rate / Speed• Target ( ideal for production lines)• Frequency• Weight• Temperature• Humidity• Real Time• Elapsed Time• Power, RPM, Torque• Pressure• ... any combination of the above

The Fusion series has these benefits...• Easy to use, no-menu programming• Smart styling, slim, easy to install• Competitively priced• Remote setting from ground level• Modular options to suit your exact needs• Displays can be built to custom formats• Indoor and outdoor models• Fast, free technical support• Long warranty, extendable free of charge• Can be built with AlphaNumeric displays• Wide range of mounting and gland positions

Input signals for the Fusion• 4-20mA, 0-10V, 1-5V etc• Loadcells• PNP, NPN, Namur, Contact closure, etc• Serial Data RS232, 485, 422 etc.• Temperature sensors• Humidity sensor• Profibus DP• Logic Reset, Tare, Peak/Valley etc.

Sealing Standards

• IP65 for bottom glands, IP54 for top

What size digits are available?• 57 mm for up to 25 metres viewing• 102mm for up to 50 metres viewing• 150mm for up to 75 metres viewing• 200mm for up to 100 metres viewing• 300mm for up to 140 metres viewing• 400mm for up to 200 metres viewing

Which output options are possible?• 2 or 4 alarm SPST relays, 2x SPDT• 4-20mA, 0-10V or -10 to +10V analog• RS232, RS485, Ethernet data output


Panel MeterP1001/6

• Easy to use• Clear, variable brightness display• Available with digits up to 400mm high• Clear written manuals & video guides - online!• Saves you time and money• Generally available from stock• Plug-in options for quick upgrades• Calibration counter for audit trails• Adjustable menu timeout for new users

Plug-in Output options...Isolated and scalable Analogue output4-20mA - Option ANI0-10V - Option ANV-10 to +10V - Option ANB

Alarm relays rated 5A 250 VAC resistive2 alarms - Option AL24 alarms - Option AL42 x SPCO - Option SPCO2 x Solid state - Option DSS

Isolated Data output optionsRS232 - Option 232RS485 - Option 485Ethernet - Option ENProfibusDP-OptionPDP

These are among the easiest of programmable panel meters to com-mission. And they offer high precision with long term reliability. If you normally programme meters via a menu system, you will know how tedious and time consuming this can be. This is why we designed the INTUITIVE series - to save you time. The INTUITIVE family eliminates the need for menus. This means faster commissioning and less stress for you. Not only is the meter easy to adjust, the operating manual is clear, simple and easy to understand. You can directly access the setting you want with our unique “Quick-Step” method. If you want to calibrate the zero, or the scaling, or the analogue output, or the alarms, or the 11 point linearisation facility, you get directly to that setting, not down a long menu system via other steps or settings!

INT2-P ProcessI/Pfor4-20mA,0-10Vetc.INT2-I ProcessIntegratorforflowtotalisingINT2-T TemperatureJ,K,T,R,S,PT100INT2-L 4and6wireloadcells.10V120mAexc.INT2-R Resistancemeter.4wiresensing.INT2-C Counter/Rate6digits,fullyscalableINT2-S SerialDataI/PforslavedisplayINT2-H Chronometer/ElapsedtimerINT2-M Millivoltinput(shuntetc)

Panel cutout should be 92mm wide x 45mm high, +1mm, -0mm 1/8 DIN. Depth behind panel 125mm max, including cables. 350 grammes typical weight

AnalogueOutput

No output -04-20mA -ANI0-10V -ANV-10/+10V -ANB

Meter input type

Process INT2-PIntegrator INT2-ITemp INT2-TLoadcell INT2-LOhms INT2-RChrono INT2-HCounter INT2-CRS232 INT2-S2RS485 INT2-S4Millivolt INT2-M

AlarmOutput

No alarms -02 alarms -AL24 alarms -AL42xSPCO -SPCODual SS - DSS

Serial DataOutput

No data -0RS232 -232RS485 -485Ethernet^ -ENProfibus^ -PDP

DisplayColour

Red -RGreen -GYellow -Y

SupplyVoltage

100-240VAC -AC11-30VDC -DC

SpecialRequirements

None -08 memories*^ -MEMIP67 cover -SPC4Factory Scaled -FSPlain lens -PLWall Box IP65 -WBRemote buttons^ -RBF Fast update^ -100X

Example part number = INT2-P-ANI-AL2-0-R-AC-SPC4-FS* Only available on -P and -L meters. ^ Reduces some options/specs.

Ordering Guide. Create a full part number like this:-

91,5 mm

44 mm

96 mm

48 mm

1/8DINformatcase,blackpolycarbonate,IP65front


Specifications Stainless steel caseIPclass: IP65Maximuminputvoltage: 24VdcMaximuminputcurrent: 700mAMaximuminputloadcellsignal: 1000mVTemperatureeffects: 50ppm/ºCProtectiondiodesagainstsurgesorelectrostaticdischargesInputsonscrewconnectorsorsolderingsquaresFourcellmodeldimensions: 155x158x45mmSixcellmodeldimensions: 190x132x50mm

Equilised Junction Box500kg to 20,000kg


• Stainless steel • IP 65• Fitted with electronic board for junction and equalisation af 4-6

load cels.• Terminal board with screws for easy connection of the load cells• Signal adjustment trimmers for accurate and reliable

equalisation.


S CellLow Capacity

Specifications Capacities: 10,25,50,100kgFullLoadOutput: 2.0(±0.25%)mV/VZeroLoadOutput: <±2.0%Excitation(Max): 10(15)VAccuracy: <0.03%Repeatability: <0.01%InputResistance: 375(±20)ΩOutputResistance: 350(±2)ΩCompensatedTemp.Range: -10to+40°COperatingTemp.: -20to+70°CTemp.CoefficientonZero: <0.0015%Capacity/°CTemp.CoefficientonSpan: <0.002%Capacity/°CSafeOverload: 150 %Insulation: >500@100VdcMΩIPclass: IP67

70 mm

Ø70 mm

35 mm

M8 x 1.2518 mm

PG7 x 10dp

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)


• Bolt on covers• Stainless steel• Sealed to IP67• Tension and compression• High accuracy

Options:

• Eye-bolts, compression fittings and instrumentation.


S cellHigh Capacity

Specifications Capacities: 250,500,1000,2000,5000,10000kgFullLoadOutput: 2.0(±0.25%)mV/VZeroLoadOutput: <±2.0%Excitation(Max): 10(15)VAccuracy: <0.03%Repeatability: <0.01%InputResistance: 375(±20)ΩOutputResistance: 350(±2)ΩCompensatedTemp.Range: -10to+40°COperatingTemp.Range: -20to+70°CTemp.CoefficientonZero: <0.0015%Capacity/°CTemp.CoefficientonSpan: <0.002%Capacity/°CSafeOverload: 150%Insulation: >500@100VdcMΩIPclass: IP68


Ex tD A20 IP68 T85C

H

W

H

B

D dia

thread T

A

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)


Capacity(kg) A W H B ØD TreadT 250,500 35 72.5 70 24.5 75 M12 x 1.75 1000,2000 45 95 95 30 100 M20 x 1.5 5000 57.5 120 120 40 125 M24 x 2 10000 65 141 145 55 152 M30 x 2 20000 8 188 190 070 200 M45 x 3

All dimensions in mm

• 250kg to 20,000kg• Welded covers• Stainless steel• Sealed to IP68• Tension and compression• High accuracy

Options:

• Eye-bolts,compressionfittings andinstrumentation.


Pressure TransducerUnderhook/Inline Load Link

Specifications Capacities: 250,500,1000,2000,5000,10000kgFullLoadOutput: 2.0(±0.25%)mV/VZeroLoadOutput: <±2.0%Excitation(Max): 10(15)VAccuracy: <0.03%Repeatability: <0.01%InputResistance: 375(±20)ΩOutputResistance: 350(±2)ΩCompensatedTemp.Range: -10to+40°COperatingTemp.: -20to+70°CTemp.CoefficientonZero: <0.0015%Capacity/°CTemp.CoefficientonSpan: <0.002%Capacity/°CSafeOverload: 150%Insulation: >500@100VdcMΩIPclass: IP68


Ex tD A20 IP68 T85C

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

Capacity(T) A B C D E F G H ØJ W1 W2 ØI 250 – 2000 135 25.4 76.2 38.1 26 16 58.5 28 13 22 27 M12x1.75 5000 170 38.1 95.3 50.8 36 20 76 39 21 28.5 36 Ø21 10000 220 50.8 120.7 68 46 26 105 52 26 35.5 50 Ø26



W2

W1

Options:

• Vesselmountingkit,loadbuttonandinstrumentation.

• Welded covers• Stainless steel• Sealed to IP68• ATEX certification available• Integral mounting base• High accuracy

hole threaded or thruI dia

2 holesJ dia

A

G

E

C FB

D

hole threaded or thruI dia

2 holesJ dia

A

G

E

C FB

D


Comp Cell500kg to 20,000kg

Specifications Capacities: 0.5,1,2,5,10,20tonneFullLoadOutput: 2.0(±0.25%)mV/VZeroLoadOutput: <±2.0%Excitation(Max): 10(15)VAccuracy: <0.25%Repeatability: <0.1%InputResistance: 750(±20)ΩOutputResistance: 700(±2)ΩCompensatedTemp.: -10to+50°COperatingTemp.Range: -20to+70°CTemp.CoefficientonZero: <0.005%Capacity/°CTemp.CoefficientonSpan: <0.005%Capacity/°CSafeOverload: 150%Insulation: >500@100VdcMΩIPclass: IP68

Capacity(t) H B W R D T P 0.5, 1 21 4 10 50 59 M3x7 42 2, 5, 10, 20 35 5 20 150 98 M6x18 72

WRadius R

B

H

Threaded Holes TOn PCD P

Diameter D

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)


All dimensiuns in mm

• Low height• Stainless steel• Sealed to IP68• Compression load cell• Integral load button• Welded cover


Bellows Bending BeamInternally gauged pins

SpecificationsRatedoutput 2±0.1%mV/VAccuracyclass 3000n.OIMLCombinederror <±0.017%Nonrepeatability <±0.015%Creep30mins <±0.016%Tempeffectonzero <±0.001%/ºCTempeffectonspan <±0.001%/ºCCompensatedtemprange -10to+40°COperatingTemp.Range -20to+50°CSafeoverload 150%Ultimateoverload 200%Zerobalance <1%Inputresistance 400±20ΩOutputresistance 350±3ΩInsulationresistance >5000M@100VDCSupplyVoltage(nominal) 10VMaxVoltage 15V



Ex tD A20 IP68 T85C

Range10-200Kg ØA ØB C D E F ØG 42 34 20 24,5 42 53,5 8,2 ØH J K L M N P 27 10 82 120 18 10 30 4mscreenedpolyurethanecable,Construction17/4/PHstainlesssteel

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

• Hermetically sealed, fully welded construction• Easy to install• Ranges 10kg to 200kg• Atex versions available• Suitable for belt and tank weighing, bag fillers and platforms• Easy installation

FED

A B CK

N

P

GG

J

L

M


ET Stainless SeriesUnderhook/Inline Load Link

SpecificationsCapacities: 1.5,2.5,5.0,7.5,10.0,12.5,15.0,20.0,25.0TFullLoadOutput: 1(nominal)mV/VZeroLoadOutput: <±2.0%Excitation(Max): 10(15)VAccuracy: <0.1%Repeatability: <0.05%InputResistance: 375(±20)ΩOutputResistance: 350(±2)ΩCompensatedTemp.Range: 0to+60°COperatingTemp.: -10to+80°CTemp.CoefficientonZero: <0.0010%Capacity/°CTempCoefficientonSpan: <0.0010%Capacity/°CSafeOverload: 300%Insulation: >500@100VdcMΩIPclass: IP68

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

A

Ø

B

DC

Type A B C D Dia. 1.5 te 175 110 70 17 16 2.5/5 te 185 120 70 25 20/26 7.5 te 200 135 70 25 30 10/12.5/15 te 270 170 90 30 36/39/43 20/25 te 350 220 120 50 52



• Range 1.5 to 25 tonne• For use with standard shackle• Robust Stainless Steel Construction• Sealed to IP68

Options:

• Otherrangesavailableonrequest• Integralconnectororfixedcable

option.• Carrycasefortransportationand

storageoflinkavailable


Bolt-onChassis Mount Cell

Specifications Capacities: 10TFullLoadOutput: 1.2(±0.25%)mV/VZeroLoadOutput: <±2.0%Excitation(Max): 10(15)VAccuracy: <0.05%Repeatability: <0.01%InputResistance: 750(±20)ΩOutputResistance: 700(±2)ΩCompensatedTemp.Range: -10to+50°COperatingTemp.: -20to+70°CTemp.CoefficientonZero: <0.005%Capacity/°CTemp.CoefficientonSpan: <0.005%Capacity/°CSafeOverload: 150%Insulation: >500@100VdcMΩEnvironmentalProtection: IP68

+ve exc (red)

+ve sig (green)

-ve exc (blue)

-ve sig (yellow)

Capacity(te) A B C D E F G ØH 10t 198 152 269 326 57 63 M24 33

A

B

C

D

E

FG

H


All dimensiuns in mm

Options:

• Alternativecapacitiesavailableon request.

• Low height• Stainless load cell• Sealed to IP68• High accuracy


Tiger G2Radio controlled lifting

Tiger has been developed for radio controlled lifting applications and can be used to control different types of cranes, EOT c ranes, container cranes and more. When you control your application with Tiger you get qualities such as duplex communication, CANopen and Modbus - all in the same system. You also work with the maximum level of security since the system is equipped with an approved stop function, according to SIL 3, IEC 61508.

When it comes to technology, security, functionality and flexibility, Tiger fulfills the demands of controlling advanced lifting applications. The sys-tems software can be easily mod fied. This means that we can adapt the system to fit your needs.

Futhermore, the Tiger system complies to a high safety standard and is CSA certified.

TX-6


10 buttons + display

Article no.: TG-T3-4-0000Frequency: 433 MHz, 69 channelsBattery: Re-chargeable/ exchangeable Weight: ~ 300 g incl. batteries Dimensions: ~ 80 x 210 x 40 mmProtection: IP65Relays: Up to 10x2 functionsTemperature: -20 to +55°CCode comb.: 4.2 B

Joystick 2x2

Article no.: TG-T4-11-0000Frequency: 433 MHz, 69 channelsBattery: Re-chargeable/ exchangeable Weight: ~ 1200 g incl. batteriesDimensions: ~ 210 x 140 x 130 mmProtection: IP65Relays: Up to 2x2 functionsTemperature: -20 to +55°CCode comb.: 4.2 B

12 buttons

Article no.: TG-T3-5-0000Frequency: 433 MHz, 69 channelsBattery: Re-chargeable/ exchangeable Weight: ~ 300 g incl. batteries Dimensions: ~ 80 x 210 x 40 mmProtection: IP65Relays: Up to 12x2 functionsTemperature: -20 to +55°CCode comb.: 4.2 B

Joystick 2x4

Article no.: TG-T3-4-0000Frequency: 433 MHz, 69 channelsBattery: Re-chargeable/ exchangeable Weight: ~ 1200 g incl. batteriesDimensions: ~ 210 x 140 x 130 mmProtection: IP65Relays: Up to 2x4 functionsTemperature: -20 to +55°CCode comb.: 4.2 B

Transmitters (Tiger)10 button + display, 12 butten Joystick 2x2, Joystick 2x4

JOYSTICK 2X2 AND 2X4

10 BUTTONS+ display

12 BUTTONS


16 relays

Article no.: TG-R1-1-0000Frequency: 433 MHz, 69 channelsPower supply: Multi Dimensions: ~ 256 x 217 x 85 mmProtection: IP66Relays: 16Temperature: -20 to +55°CCode comb.: 4.2 B

16 relays


32 relays


Receivers (Tiger)16 Relays, 32 Relays, 16 relays Anybus


Notes :


Notes :


Notes :

28

VETEC APSLucernemarken 18a DK-5260 Odense SPhone. +45 65 91 98 02 Fax. +45 65 91 88 02Email. [email protected]

VETEC ASIA PACIFIC PTE. LTD.809 French Road Kitchener Complex#06-164 Singapore 200809Phone. +65 81 27 90 82 Email: [email protected]

Documents

Vetec Catalogue 2015