Upload
phamdiep
View
221
Download
0
Embed Size (px)
Citation preview
www.pumpmaster.com.au
General Tech DataVertical Multistage In-Line Pumps
Pumpmaster Australia Pty Ltd. Ph: +61 2 4822 4999
Vertical Multistage In-Line Pumps
Performance range 50Hz
Water Supply & Pressure BoostingPressure boostong in buildings, hotels, residential complexesPressure booster stations, supply of water networksPressure boosting for industrial water supply
Irrigation & AgricultureGreenhousesSprinkler irrigationField & general irrigation
Water TreatmentWater Softners and de-mineralizationReverse Osmosis systemsDistillation systemsFiltration
Industry
Washing & cleaning systemsFire fighting systemsCar washing facilitiesProcess water systemsMachine tools (cooling lubricants)
Heating, Ventilation & Air-Conditioning
BoilersInduction HeatingHeat exchangersRefrigerationCooling towers and systemsTemperature control systems
www.pumpmaster.com.au
The SCV, SBV & SSV pumps are non-self priming vertical multistage in-line design, flange or victaulic coupling with equally sized suction and discharge ports. Stage construction with stainless steel impellers, chambers and pressure casing. Pump stub shaft and motor shaft are directly close coupled (IEC Standard). All pumps equipped with cartridge type mechanical seal for easy maintenance.
SCV, SBV & SSV pumps have different pump sizes and various numbers of stages to provide the flow and pressure required.
Vertical Multistage In-Line Pumps
Description
General Tech Data
Applications
Pumpmaster Australia Pty Ltd. Ph: +61 2 4822 4999
SCV:Cast Iron & StainlessSteel AISI 304 (EN 1.4301)
SBV:StainlessSteel AISI 304 (EN 1.4301)
SSV:StainlessSteel AISI 316 (EN 1.4401)
Mains Connection 1~
(Permissible voltagetolerance ± 10%)
Mains Connection 3~
(Permissible voltagetolerance ± 10%)
SCV:Flanged Pipe Con.
SBV, SSV:Flanged Pipe Con.
SBV, SSV:Victaulic Pipe Con.
Mechanical Seals
Elastomers
Mechanical Seal
www.pumpmaster.com.au
Viton fitted as standard (EPDM available on request)
DN100 DN 100
DN 40 DN 50 DN 50 DN65 DN 80 DN 100
DN 40 DN 50 DN 50 DN65 DN 80
DN 32 DN 33 DN 50
Silicone Carbide fitted as standard
N/A N/AR 4R 2 R 3R 1¼DN 51 DN 52
DN100
50°C
N/A N/ADN 34
DN 32 DN 33 DN 34R 1¼ R 1¼
•
DN 25/ DN 25/ DN 25/DN 33 DN 34
Enclosure Class IP 55Ambient Temperature
• •
DN 32DN 25/ DN 25/ DN 25/
• •
0.37 - 7.5kW 220-240/380-415V 50HzFrom 11kW 380-415V 50Hz
• • • •
220-240V 50Hz
• • •
• • •
4-45 5.5-45
Insulation Class F
•
• • •
• • • •
• • • • • • •
20-15 to +120
21.5
Nominal Flow (m³/hr)
Flow Range (m³/hr)
6430-85 45-120
21.5 21.8
Motor Power (kW)
Fluid Temp (°C)
Max. Pressure (bar)
1.5-300.37-2.2 0.37-3 0.37-5.5 0.37-7.5
23 24
3-451.1-15 1.1-18.5
15-40 22-583323 24.3 27.5
0.7-2.43 90
1.2-4.5 2.5-8.5 5-13 8.5-23.5 10.5-295 10 15 20 32
Vertical Multistage In-Line Pumps
31
45
Pumpmaster Australia Pty Ltd. Ph: +61 2 4822 4999
Cartridge type mechanical seal made of Silicon Carbide/Silicon Carbide/Viton or EPDM. Based on the type of application, alternative materials are available for the seal and elastomers. The mechanical seal cartridge can be replaced in minutes without special tools and without dismantling the pump.
1
9064
General Tech Data
Product Data
20Range SCV, SBV, SSV15105 4532
www.pumpmaster.com.au
General Tech DataVertical Multistage In-Line Pumps
Maximum Operating Limits
SCV, SBV, SSV 1
Maximum Inlet PressureStages
10 bar
Maximum Operation Pressure
25 bar2 - 36
18 36 15 bar
16 barSCV, SBV, SSV 10
Stages
10 bar31 - 362 - 29
2 - 3625 bar2 - 36SCV, SBV, SSV 3
15 bar
1 - 6 8 bar
SCV, SBV, SSV 5
2 - 36 25 bar 2 - 16 10 bar
17 - 221 - 16
SCV, SBV, SSV 151 - 10 16 bar 1 - 3 8 bar
7 - 22 10 bar25 bar
12 - 17 25 bar 4 - 17 10 barSCV, SBV, SSV 20
1 - 10 16 bar 1 - 3 8 bar12 - 17 25 bar 4 - 17 10 bar
SCV, SBV, SSV 32(1 - 1) - 7 16 bar (1 - 1) - 4 4 bar
(8 - 2) - 14 30 bar (5 - 2) - 10 10 bar(11 - 2) - 14 15 bar
(12 - 2) - (13 - 2)(6 - 2) - 11
SCV, SBV, SSV 45(1 - 1) - 5 16 bar (1 - 1) - 2 4 bar
(3 - 2) - 5 10 bar(6 - 2) - (13 - 2) 15 bar33 bar
30 bar
15 bar
SCV, SBV, SSV 64(1 - 1) - 5 16 bar (1 - 1) - (2 - 2) 4 bar
(6 - 2) - (8 - 1) 30 bar (2 - 1) - (4 - 2) 10 bar(4 - 1) - (8 - 1)
SCV, SBV, SSV 90(1 - 1) - 4 16 bar (1 - 1) - 1 4 bar
(5 - 2) - 6 30 bar (2 - 1) - (3 - 2) 10 bar3 - 6 15 bar
Pumpmaster Australia Pty Ltd. Ph: +61 2 4822 4999
www.pumpmaster.com.au
MPIF FC0525
MPIF FC0525 SINT C11 MPIF
FC0525 SINT C11
General Tech Data
36
56
EuropePos.
EuropeAUS
Vertical Multistage In-Line Pumps
Construction
SBV 1,3,5,10,15,20
EN-GJS-450-10
SSV 1,3,5,10,15,20Standard Standard StandardName Material
SCV 1,3,5,10,15,20
AUSEuropeAUS
1.4301 AISI 304 1.4401 AISI 316
ATSM 65-45-12
EN-GJS-450-10
ATSM 65-45-12
Pump Head Cover Stainless Steel
ATSM 25B
EN-GJL-200Cast IronPump head
N/A
18 Impeller Stainless Steel 1.4301 AISI 316
37 Shaft Stainless Steel 1.4057 AISI 431 1.4057 AISI 431 1.4401 AISI 316
AISI 316
82 Elastomers Viton
48 Outer Sleeve Stainless Steel 1.4301 AISI 304 1.4301
AISI 316
24 Neck Ring PTFE
12 Chamber Stainless Steel 1.4301 AISI 304 1.4301
Base - SBV, SSV Stainless Steel 1.4301 AISI 304
EN-GJL-200
Pumpmaster Australia Pty Ltd. Ph: +61 2 4822 4999
Silicon Carbide/Viton
N/A
ASTM 25B
Base - SCV Cast Iron EN-GJL-200
ASTM 25B
N/A
N/A
1.4401 AISI 316
ASTM 25B
AISI 304 1.4401
AISI 304
Cast Iron
1.4301 AISI 304 1.4401
EN-GJL-200Base Plate
SINT C11
AISI 304 1.4401
59
57 Mechanical Seal Cartridge Type
44 Coupling Fe-Cu-C
62
SCV - 1,3,5,10,15,20 SBV/SSV - 1,3,5,10,15,20
www.pumpmaster.com.auPumpmaster Australia Pty Ltd. Ph: +61 2 4822 4999
42 Bottom Bearing Ring Tungsten Carbide Tungsten Carbide/Tungsten Carbide
57 Mechanical Seal Cartridge Type Silicon Carbide/Viton
EN-GJL-250
ASTM 35B
EN-GJL-250
ASTM 35B
14 Bearing Ring POB + Graphite + PTFE
Cast Iron N/A
59Base - SCV Cast Iron EN-GJL-
250ASTM 35B
62 Base Plate
N/A
Base - SBV, SSV Stainless Steel N/A 1.4301 AISI 304 1.4401 AISI 316
1.4401 AISI 316
24 Neck Ring PTFE Carbon Fiber + POB + PTFE
12 Chamber Stainless Steel
1.4301
1.4301 AISI 304 1.4301
AISI 304AISI 304 1.4301
AISI 304
AISI 316
1.4401 AISI 316
82 Elastomers Viton
48 Outer Sleeve Stainless Steel
37 Shaft Stainless Steel 1.4057 AISI 431 1.4057 AISI 431 1.4401
ATSM 35B
18 Impeller Stainless Steel 1.4301 AISI 304 1.4301 AISI 304 1.4401 AISI 316
AISI 304
53 Motor Bracket Cast Iron EN-GJL-250
EN-GJL-250
ATSM 35B
1.4301
EN-GJL-250
Europe AUS
ATSM 35B
Europe
AISI 3161.4401
Standard StandardSBV 32, 45, 64, 90
Vertical Multistage In-Line Pumps
Construction
Pos. Name MaterialAUS
SCV 32, 45, 64, 90
Europe AUS
SSV 32, 45, 64, 90Standard
36 Pump headStainless Steel
Cast Iron EN-GJL-250
ATSM 35B
Bronze
General Tech Data
SCV - 32, 45, 64, 90 SBV/SSV - 32, 45, 64, 90