Embed Size (px)
Citation preview
DESIGN WITH US AND SAVE YOUR COST
DESIGN WITH US AND SAVE YOUR COST
Expertise In
Fire Protection
•DESIGN
•COORDINATION
•3D MODULING
•STOCK-LISTING
•ESTIMATION
We Vermont India are situated in state capital of Jharkhand at
Ranchi. Our design team have 15 year of experience in the field of
Fire Protection Design, Estimation, Coordination and 3d- muddling
and are fully dedicated to various United State clients all over the
states. To insure good quality work with in the time we have one sr.
design engineer dedicated for each company to understand their
way of design and requirements. We have office inside the Campus
of Software Technologies Parks of India to make working enjoyment
healthy and clean. Which have 24 hour electricity, high speed
internet and canteen facility in the Campus.
Sprinkler/Hydrant system design: We provide complete sets of drawings which includes, Detailing, Riser Diagram, Seismic Calculation (if needed), 3D Fire pump assembly diagram, Hydraulic Calculation.. The proven ability to develop, layout turn-key fire sprinkler systems, on time and on budget. We offer the unique combination of managerial and technical expertise essential to complete any new or retrofit fire sprinkler design project.
Expert Design Team, offering
Detailed Specs and Design Concepts
Feasibility Planning and Budgeting
Hydraulic Calculations.
Advanced 3D CAD Design Capabilities
Extensive Knowledge of Fire Protection Requirements and Codes.
Wet Pipe Fire Sprinkler System.
Fire Hydrant System.
Dry Fire Sprinkler System.
Deluge Fire Sprinkler System.
Pre-action Fire Sprinkler System.
ESFR Fire Sprinkler System.
In-Rack Fire Sprinkler System.
Fire pumps are necessary any time a water supply is not capable of providing the pressure required by the sprinkler system design. Occasionally, there is insufficient city supply or no water supply and the pump must be supplied from a ground storage tank or other static source.
We have designed pumps in accordance with NPFA 20, the standard for Installation of Stationary Pumps for Fire Protection.
We are regularly involved in the following types of electric and diesel motor driven fire pump assembly Designing:
Split Case Horizontal
Split Case Vertical
Vertical In-Line
Vertical Turbine
Packaged Skid Mounted
3D FIRE PUMP
Building Models and BIM Technology
Fire Suppression and Fire Sprinkler System Design
Vermont India has created 3D fire protection drawings since 2000. We currently have Specialized designers and the best fire protection software titles available.
Within the fire protection industry and fire sprinkler system design, we lead the pack with our advanced software, 3D capabilities, and collision checking experience. We have coordinated hundreds of fire suppression projects using 3D software
"Building models and BIM technology will certainly become the standard representation and practice for construction within most of our lifetimes."
We provide complete sets of Material and shop fabrication
drawing which helps in figure-out actual material installed, and
also fitter knows which pipe materials/ pipes need to install
where.
We provide estimated quantity of materials used in the projects, your work is to put the value and labor cost, which saves lots of time of project manager, one can concentrates more to bring projects.
DRAWINGS SETUP WITH GIVEN TITAL BLOCK
START
PLACE STANDPIPE AND RUN BULK AND TAKE APPROVAL
APPROVED
YES
NO
SETUP STPS CALCULATION AND RISER DIAGRAM
SELECT SPRINKLER HEAD AND SEND FOR APPROVAL
FINALIZE PUMP SIZE STP SIZE AND SEND FOR APPROVAL
APPROVED YES
NO
APPROVED
YES
NO
FINISH HEAD AND PIPE LAYOUT AND SEND FOR APPROVAL
FINISH FLOOR CALCULATIONS AND SIZE ALL PIPES
APPROVED YES
NO
APPROVED YES
NO
FINISH PRV CALCULATION IF REQUIRED
FINISH 3D FIRE PUMP DESIGN
APPROVED YES
NO
FINISH GENERAL NOTES DETAIL PAGES AND SITE PLAN. SNED
FOR APPROVAL
S
T
E
P
3
APPROVED YES
NO
STEP 1 STEP 2
FINAL PDF
FINAL PDF
FINAL PDF
STEP
4
COMBINED
AND SUBMITT
STEP 5
STOP
STEP 6
COORDINATION
PIPE LISTING
AS - BUILT
STEP 4
