Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
VENTILATIONduct and Fittings
INDUSTRIESAB
WWW.ABINDUSTRIES.COM.AU
2
METERS ONLY REBATED OR STRAIGHT SIDEDDid you know that A&B Industries is the manufacturer?
We manufacture and distribute the products directly to you.
There is no “middle man” this guarantees that you receive the
best possible product at the best possible price.
Great Product Design and Functionality
A&B Industries Product Manager and founder is a mechanical
tradesman who has been in the trade for over 25 years. His
experience means that the product is designed to ensure
that it functions the way it’s supposed to, that’s why we say
A&B Industries is “Designed by tradesmen for tradesmen”.
Our products are tested for reliability and safety. We have all
the relevant approvals needed for our products such as the
Australian Standards.
Complies to the Australian & New Zealand Standards
Product safety is a priority for us at A&B Industries. That is
why we ensure that products comply with the Australian &
New Zealand Standards.
What are Australian & New Zealand Standards (AUS/NZ)?
These Standards have been developed with a set of criteria’s
which the product must meet. To achieve this status, the
product must pass a series of tests in which it is put under
difficult conditions that are designed to be similar to those
that the item will endure in its day to day function. If the
product has passed these tests then it gains certification
under the Australian and New Zealand Standard.
It is a requirement by legislation that if a product needs
approval, then we must ensure that it is certified before it’s
sold to the customer. All Electrical manufacturers regardless
of whether they are a sole trader or large multinational
company must meet the same standard.
Our Gas Heating products are all audited yearly and Certified
by the Australian Gas Association to comply with strict Gas
Legislation.
Quallity Assurance
Our aim has always been to offer our customers Quality. We
use ISO 9001 Quality Management Systems.
100% Australian Owned
When you buy from A&B Industries you are supporting an
Australian family owned and managed company. We employ
around 20-30 full time and casual employees.
Certification & Accreditations
A&B is certified and accredited to the following standards: –
• ISO 9001:2008. Quality system helps ensure consistent
product and traceability.
• AS/NZS 4801:2001. OH&S system protects our work
force from dangers of working with sheet metal.
• NATA tested products – independently tested IP ratings
• AGA approved and tested
History
Key dates in the history of A&B are as follows:
• 1987 – A&B founded manufacturing Gas Heating and
some Electrical Products.
• 1998 – Formation of Domestic Enclosures Division
• 1998 – Move to new premises in Salisbury South SA to
increase capacity
• 2000 – Extension of Salisbury South premises completed
• 2007 – Celebrates 20 years of business.
• 2011 – Release of NBN enclosure system solution
• 2015 – Upgrade of existing plant to include new
conveyor line and CNC Turret press.
• 2015 – Re-branding of A&B, consolidating all divisions to
offer a unified vision for the future.
• 2016 - Installation of Powder Coating Oven and line.
Manufacturing Facilities
Adelaide – 2,000m²
Residential Commercial Electrical, Meter Enclosure, Gas
Heating, Wood Fire and Fencing products are primarily
manufactured from our facility in South Australia. Facilities
include the following equipment.
• 8 various style “G” Presses
• 2 Guillotines with a capacity to cut 3.0 MS up to 2400
long.
• 30 Ton 2500 x 1200 Nishimbo CNC Turret Press
• CNC Plasma Cutting
• Tig welding of Stainless Steel and Aluminium
• Mig welding facilities.
• 4 Mechanical Brake Presses for folding material 3.0 x 3m
long.
• Spot Welders.
• Flue Pipe forming and rolling machinery.
• Spray painting booth and conveyor line.
• Tool room facility to maintain and manufacture tooling
and jigs.
• Transport capability to give on time delivery.
3
ELECTRICAL ENCLOSURES
A&B Industries also like to highlight their ability to
manufacture non-standard equipment in: Galvanised steel,
stainless steel, aluminium, mild steel tubing etc.
• Switchboards and general purpose enclosures complete
with cut-outs, equipment mounting plates, rain hoods.
• Powder coating of our products in any colour
• Ducting and flashings.
• Galvanised protection cages in any size
• Customer’s Support Poles as specified by SAPN Guide for
Customer’s support poles
• Guillotining, bending, punching, welding, CNC Turret
Punching and CNC Plasma Cutting
Feel free to call us anytime during working hours for an
obligation free quotation and assistance in design.
A&B Industries have been supplying our
Wholesale Branches with various Electrical
Components using high quality and precision
work of complex fabrication tasks, managing
production requirements against workshop
commitments.
“
“
About A&B Industries
Welcome to our brand new brochure, we trust that this will
be of assistance to you.
A&B Industries is proud to be an Australian sheet metal
manufacturer with its factory located in the northern suburbs
of Adelaide in South Australia.
We specialize in the manufacture of high quality products and
components from galvanised, aluminium and stainless steel
sheets. We have also great expertise in the manufacture of
steel brackets, usually in hot dipped galvanised finish.
Over the past two decades A&B Industries have developed a
large range of standard products, enclosures and hot dipped
galvanised brackets for the Electrical, and Gas, Ventilation,
Wood Fire and Fencing Industries.
A&B Industries are also able to offer custom-built sheet metal
enclosures for the electrical/electronic industry, from single
units to small/medium production runs with obligation free
assistance in design and quotations.
CONTACT INFO
5 Bremen Drive, Salisbury South 5106, SA.
Phone: (08) 8281 1211
Fax: (08) 8281 7443
Website: www.abindustries.com.au
E-mail: [email protected]
Dust and fumes that are not sufficiently extracted from work areas can put businesses at high-risk of unclean work environments.
Product contamination, high wear and tear of mechanisms and risk of failure to electronic circuitry and wiring can cause your business to experience a loss of productivity. Modular and flexible ducting is the best choice for extraction materials.
A&b Industries is the trusted supplier to businesses that want quality fume and dust extraction systems. Flex duct is available in over 20 different types, designed to withstand the rigours of numerous industrial application. Backed by over 30 years of manufacturing excellence pays big dividends with durable, long-lasting qualities built into our products. Thank you for taking the time to view our catalogue.
TABLE OF CONTENTS (CLICK LINK TO BE DIRECTED TO PAGE)
1. Standard Modular Ducting
2. Ducting Accessories - Fittings
3. Ducting Accessories - Valves4. Ducting Accessories - Other7. Flexible Ducting - Polyurethane8. Flexible Ducting - PVC9. Flexible Ducting -Thermoplastic Rubber10. Flexible Ducting - External Helix
11. Flexible Ducting - Polyethylene
To contact us to ask questions or make an order, please phone 08 8281 1211 or email [email protected] For more information, visit our website www.abindustries.com.au
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
Call for quote on 304 2b Stainless Steel fittings
1.2 - Straight Ducting
MMaatteerriiaalllongitudinally lock formed galvanised ducts
SSiizzeessDiameter: 80mm – 1000mm0.5 m, 1.0m and 2.0m lengths Other dimensions available to order
Straight DuctingCode D
Dimensional Specifications
Dimensional specifications are given in the table below
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
Dimensional Specifications
Dimensional specifications are given inthe table below
MMaatteerriiaallPressed 1.0mm galvanised steel Smooth internal bore reduces pressure loss and wear
SSiizzeessDiameter: 80mm – 400mmBend angle: 7.5° to 90°R = 1.5 x D
Pressed BendsCode B
1.3 - Pressed Bends
5 Bremen Drive, Salisbury South 5106 SA.
08 8281 1211
Fax 08 8281 7443
www.abindustries.com.au
1.4 - Segmented Bends
MMaatteerriiaallSegmented galvanised steel bends
SSiizzeessDiameter: 450mm – 550mmBend angle: 7.5° to 90°Other dimensions available to orderR = 1.5 x D
Segmented BendsCode B
Dimensional Specifications
Dimensional specifications are given inthe table below
MMaatteerriiaall0.9mm galvanised steel with leverlock ring and rubber insert
SSiizzeessDiameter: 80mm to 500mm
Telescopic DuctingCode DTS
Dimensional Specifications
Dimensional specifications are given in the table below
1.5 - Telescopic Ducting
5 Bremen Drive, Salisbury South 5106 SA.
08 8281 1211
Fax 08 8281 7443
www.abindustries.com.au
1.6 - 30˚ Duct Entries
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessManufactured to order
DDiimmeennssiioonnssCustomer to specify A, B & C. Pleasenote that options are limited by thefact that A = C & A ≥ B
The branch determines the lengthL1. The duct entry can only be fittedto straight duct with the branchplaced centrally on the plate
If B < 300: X = 50mmIf B > 300: X = 100mm
CCaallccuullaattiioonnssL1 = See tableL2 = 1/2 - (L1 – (A/tg ))L3 = ((L1-L2)/cos ) – ((B/2) x tg )
EExxaammpplleeA = 700, B=350, C=700L1 = 950mmL2 = 0.5 – (950–(700/tg 29.6)) = 0.5 – (950–1332.22)L2 = 382.72 ~ 383mmL3 = ((950–383)/cos 29.6) – ((350/2) xtg 29.6) = 652.10 – 99.41L3 = 552.69 ~ 553mm
30˚ Duct Entries CODE DE30
Dimensional Specifications
Dimensional specifications are given inthe table below
˚
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessManufactured to order
DDiimmeennssiioonnssCustomer to specify A, B & C. Pleasenote that options are limited by thefact that A = C & A ≥ B
The branch determines the lengthL1. The duct entry can only be fittedto straight duct with the branchplaced centrally on the plate
If B < 300: X = 50mmIf B > 300: X = 100mm
CCaallccuullaattiioonnssL1 = See tableL2 = 1/2 - (L1 – (A/tg ))L3 = ((L1-L2)/cos ) – ((B/2) x tg )
EExxaammpplleeA = 550, B=500, C=550L1 = 1050mmL2 = 0.5 – (1050–(500/tg 44.8)) = 0.5 – (1050 – 553.85)L2 = -495.65 ~ -496mmL3 = ((1050 – 496)/cos 44.8) – ((550/2)x tg 44.8) = 2178.78 – 248.26L3 = 1930.52 ~ 1931mm
45˚ Duct Entries CODE DE45
Dimensional Specifications
Dimensional specifications are given inthe table below
1.7 - 45˚ Duct Entries
˚
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
1.8 - 30˚ Straight Branch Pieces
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessCommon sizes are a stock itemSpecial requirements are manufactured to order
DDiimmeennssiioonnssWhen placing an order, the measurements for A, B & C must be stated. Please note that the options are limited by the factthat A = C & A ≥ B
CCaallccuullaattiioonnssL1 = See tableL2 = (1/2) - (L1- (A / tg ))L3 = ((L1-L2) / cos )) - ((B/2) x tg )
EExxaammpplleeA=650, B=650, C=400L1 = 1050mmL2 = 0.5 – (1050–(650/tg 29.7)) = 0.5 – (1050 - 1139.57)L2 = 90.07 ~ 90mmL3 = ((1050 – 90)/cos 29.7) – ((650/2) x tg 29.7) = 1105.19 – 185.38L3 = 919.81 ~ 920mm
30˚ Straight Branch PiecesCode BPS30
Dimensional Specifications
Dimensional specifications are given inthe table below
˚
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
1.10 - 30˚ Conical Branch Pieces
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessCommon sizes are a stock itemSpecial requirements are Manufactured to order
DDiimmeennssiioonnssRefer to table – customer to specifyA, B, & C
Please note the Branch ‘B’ determines L1, as in the table below
The maximum diameter reductionbetween A & C is 200mm. B musthowever, not be larger then or equalto (A + C)/2
In the case of double branch pieces,the largest branch determinesLength L1
CCaallccuullaattiioonnssL1 = See tableL2 = (L1/2) - ((A+C) / (4 tg ))L3 = ((L1-L2) / cos ˚)) - ((B/2) x tg ˚)
EExxaammpplleeA=650, B=500, C=450L1 = 1250mmL2 = (1250/2) – ((650+450)/(4 x tg29.7)) = 625 – 482.13L2 = 182.87 ~ 183mmL3 = ((1250-183)/cos 29.7) – ((500/2) xtg 29.7) = 1228.37 – 142.60L3 = 1085.77 ~ 1086mm
30˚ Conical Branch PiecesCode BPC30
Dimensional Specifications
Dimensional specifications are given inthe table below
˚
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
Dimensional Specifications
45˚ Straight Branch PiecesCode BPS45
Dimensional specifications are given inthe table below
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessCommon sizes are a stock itemSpecial requirements are manufactured to order
DDiimmeennssiioonnssWhen placing an order, the measurements for A, B & C must be stated. Please note that the options are limited by the factthat A = C & A ≥ B
CCaallccuullaattiioonnssL1 = See tableL2 = (1/2) - (L1- (A / tg ))L3 = ((L1-L2) / cos )) - ((B/2) x tg )
EExxaammpplleeA=500, B=500, C=450L1 = 950mmL2 = 0.5 – (950–(500/tg 44.7)) = 0.5 – (950–505.26)L2 = -444.24 ~ - 444mmL3 = ((950 + 444)/cos 44.7) - ((500/2) x tg 44.7) = 1961.17 – 247.40L3 = 1713.77 ~ 1714mm
1.9 - 45˚ Straight Branch Pieces
˚
5 Bremen Drive, Salisbury South 5106, SA.
(08) 8281 1211
Fax (08) 8281 7443
www.abindustries.com.au
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessCommon sizes are a stock itemSpecial requirements are manufactured to order
DDiimmeennssiioonnssRefer to table – customer to specifyA, B, & C
Please note the Branch ‘B’ determines L1, as in the table below
The maximum diameter reductionbetween A & C is 200mm. B musthowever, not be larger then or equalto (A + C)/2
In the case of double branch pieces,the largest branch determinesLength L1
CCaallccuullaattiioonnssL2 = (L1/2) - ((A+C) / (4 tg ))L3 = ((L1-L2) / cos ˚)) - ((B/2) x tg ˚)
EExxaammpplleeA=500, B=300, C=350L1 = 600mmL2 = (600/2) – ((500+350)/(4 x tg 44.6))= 300 – 215.49L2 = 84.51 ~ 85mmL3 = ((600-85)/cos 44.6) – ((300/2) xtg 44.6) = 723.29 – 147.92L3 = 575.37 ~ 575mm
45˚ Conical Branch PiecesCode BPC45
Dimensional Specifications
Dimensional specifications are given inthe table below
1.11 - 45˚ Conical Branch Pieces
˚
1.12 - ‘T’ Pieces
MMaatteerriiaallGalvanised steel
SSiizzeessManufactured to orderAvailable from 80mm to 1000mmdiameter
DDiimmeennssiioonnssCustomer to specify A & B
‘T’ PiecesCode TP
Dimensional Specifications
Dimensional specifications are given inthe table below
˚
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessManufactured to orderAvailable from 80mm to 1000mmdiameterStandard angle 30˚ – others available on request
DDiimmeennssiioonnssCustomer to specify A, B & Cthe ‘Y’ pieces are manufactured toorder in other degrees and sizes.Please note A > B and A ≠ C it is thelargest value of B and C that mustbe applied in the calculation.
CCaallccuullaattiioonn ooff LL11 aanndd LL22 ffoorr 22 xx 3300°°L1 = (A x 0.134) + 50L2 = (B x 0.866) + 100
EExxaammpplleeA = B = C = 200L1 = (200 x 0.134) + 50 = 76.8L2 = (200 x 0.866) + 100 = 273.2
CCaallccuullaattiioonn ooff LL11 aanndd LL22 ffoorr 22 xx 4455°°L1 = (A x 0.207) + 50L2 = (B x 0.5) + 100
EExxaammpplleeA = B = C = 200L1 = (200 x 0.207) + 50 = 91.4L2 = (200 x 0.5) + 100 = 200
With conical ‘Y’ pieces where A > B,A < C and B = C, L1 and L2 must bespecified.
‘Y’ PiecesCode YP
Dimensional Specifications
Dimensional specifications are given in thetable below
1.13 - ‘Y’ Pieces
1.14 - Reducing Cones
MMaatteerriiaallSpot welded and made from 0.9mm galvanised steel
DDiimmeennssiioonnssRefer to tableOther specifications made to order
CCaallccuullaattiioonn ooff tthhee lleennggtthh LL ooff tthheettaappeerrThe difference between the large and the small diameter (D – d) of the reducing cone is plotted on the vertical axis (y) in the system of co-ordinates.
By following the line from this pointto the intersection, the length L isread in the corresponding point onthe horizontal axis (x) in the systemof co-ordinates.
Reducing ConesCode RC
Calculation of the length L of the taper
Dimensional specifications are given inthe table below
MMaatteerriiaall0.9mm galvanised steel, spot welded
SSiizzeessManufactured to orderspecify BU, LU & D
HHeeiigghhttH = 250mm + 0.5 x (maximum valueof LU – D) or (BU – D)
OOtthheerrTransition pieces are made to orderin any dimension. They can also beordered as asymmetrical units.
Square to Round Transition PieceCODE SQ-RD
1.15 - Square to Round Transition Piece
MMaatteerriiaall
Galvanised steel with nut and boltclosure
SSiizzeess
80mm to 550mm diameter
NNoottee
Should be used in association withDuct End Seals to ensure perfectsystem closure
Standard Lock RingCode SL
Dimensional Specifications
Dimensional specifications are given inthe table below
2.1- Standard Lock Ring
MMaatteerriiaall
Galvanised steel, hinged, with PVCseal and quick release lever lock
SSiizzeess
80mm to 550mm diameter
OOppttiioonnss
Available with RED - liner standard for use up to 60°CBLACK - liner for use up to 100°CGREY - liner for use up to 200°C
Lever Lock RingCode LL
Dimensional Specifications
PRODUCT PRODUCT CODECODE
D D mm mm
WeWeight / / 1010 p pcs kgkg
LL80 80 2.00 LL100 100 2.30 LL125 125 2.45 LL140 140 2.50 LL150 150 2.50 LL160 160 2.60 LL180 180 2.60 LL200 200 3.30 LL225 225 3.40 LL250 250 3.80 LL275 275 4.20 LL300 300 4.25 LL315 315 4.40 LL350 350 4.90 LL400 400 5.25 LL450 450 6.00 LL500 500 6.50 LL550 550 7.00
2.2 - Lever Lock Ring
Dimensional specifications are given inthe table below
2.3 - Wide Lock Ring
MMaatteerriiaall
Two piece galvanised steel lock ringwith nut and bolt closureFor use with large diameter ducting
SSiizzeess
200mm to 650mm diameter
OOppttiioonnss
Available with RED - liner standard for use up to 60°CBLACK - liner for use up to 100°CGREY - liner for use up to 200°C
Wide Lock RingCode WL
Dimensional Specifications
Dimensional specifications are given inthe table below
Dimensional Specifications
2.4 - Worm Drive Clamps
Dimensional specifications are given inthe table below
MMaatteerriiaall
Zinc plated steelor stainless steel
SSiizzeess
32mm to 300mm diameter
NNoottee
Smooth band to protect hoses and astrong torque rating
Worm Drive ClampsCode WDCG for standard clampsCode WDCS for stainless steel clamps
2.5 - Flexible Hose Spigots
MMaatteerriiaall
0.9mm galvanised steel
SSiizzeess
80mm to 400mm diameter
NNoottee
Used to join SpeedLock to EximoFlex products
Flexible Hose SpigotsCode FHS
Dimensional Specifications
MMaatteerriiaall
Profiled EPDM rubberFor use with standard lock rings
SSiizzeess
80mm to 400mm diameter
NNoottee
Made from EDPM rubber and usedto complete a seal when using ourStandard Lock Rings (Code SL). Onlyone seal is used per connection. Theseal is placed over the bead onSpeedLock Duct prior to assembly.Hardness is 80° shore and toleratestemperatures from -40° to 100°.
OOppttiioonnss
Also available in diameters 80-400 inNitril Rubber (Code DESN). Hardnessis 80° shore and operates from -15°to 80°. Nitril Rubber is resistant tooil, petrol and some acids.
Duct End SealsCode DESCode DESN (Nitril Rubber)
Dimensional Specifications
2.6 - Duct End Seals
Dimensional specifications are given inthe table below
2.7 - Flanges
MMaatteerriiaall
Hot galvanised flat iron
SSiizzeess
80mm to 1250mm diameter
OOppttiioonnss
Also available made from NitrilRubber (Code FR) and complimentour extensive range of flanges.Hardness is 65° shore operates from-10° to 70° resistant to oil, petrol andsome acids.
FlangesCode F (Galvanised)
Code FR (Nitril Rubber)
Dimensional Specifications
Dimensional specifications are given in the table below
MMaatteerriiaall6mm rolled and welded hot galvanised flat iron
SSiizzeess400mm to 1000mm diameter
OOppttiioonnssAlso available made from Nitril Rubber (Code FHR) to compliment our extensive range of flangeshardness is 65˚ shore operates from-10˚ to 70˚ and is resistent to oil,petrol and some acids
Heavy FlangesCode FH
Dimensional Specifications
5.4 - Flanges / Weld Ends
Dimensional specifications are given in the table below
Heavy Weld EndsCode WEH Dimensional Specifications
Dimensional specifications are given inthe table
MMaatteerriiaall2mm steel plate
SSiizzeess100mm to 600mm diameter
MMaatteerriiaall
2.0mm galvanised steel, 10mm hole
SSiizzeess
80mm to 315mm diameter
NNoottee
It is strongly recommended thatHanging Brackets and Bracket Legsbe used every second length of duct.
Hanging Brackets and Bracket LegsCode HB (Hanging Brackets)
Code WBL (Bracket Legs)80mm to 315mm
Dimensional Specifications
With legs For wall mounting
Suspended Bracket Legs
2.9 - Hanging Brackets and Bracket Legs
MMaatteerriiaall
3.0mm galvanised steel, 10mm hole
SSiizzeess
325mm to 800mm diameter
NNoottee
It is strongly recommended thatHanging Brackets and Bracket Legsbe used every second length of duct.
Hanging Brackets and Bracket LegsCode HB (Hanging Brackets)Code WBL (Bracket Legs)325mm to 800mm
Dimensional Specifications
2.10 - Hanging Brackets and Bracket Legs
With legs For wall mounting
Suspended Bracket Legs
Dimensional Specifications
MMaatteerriiaallPressed steel plate, painted, with2mm steel plate damper and brassbearings
SSiizzeess100mm to 300mm
OOppeerraattiioonnManually operatedAlso available with pneumatic orelectric operation as optional accessories
NNootteeThese diverters can be adjusted to45˚ operation though fitting aSpeedLock 15˚ bend to the left inletand one outlet
60˚ Branch Type Diverter ValvesCode DVBM
Dimensional specifications are given inthe table below
3.1 - 60˚ Branch Type Diverter Valves
MMaatteerriiaall
Pressed steel plate, painted, with2mm steel plate damper and brassbearings
SSiizzeess
100mm to 300mm
OOppeerraattiioonn
Manually operatedAlso available with pneumatic or electric operation as optionalaccessories
NNoottee
These diverters can be adjusted to45° operation through fitting aSpeedLock 15° bend to the inlet andone outlet
60˚ Trouser Type Diverter ValvesCode DVTM
Dimensional Specifications
3.2 - 60˚ Trouser Type Diverter Valves
Dimensional specifications are given inthe table below
MMaatteerriiaall
0.9mm galvanised steel with doubleplate damper
SSiizzeess
80mm to 500mm
OOppeerraattiioonn
Manually operated, with continuouslyvariable opening settings. 96% maximum closure.
OOppttiioonnss
Can be fitted with electric or pneumatic operation as an optionalaccessory. Please ask us for specifications
Throttle ValvesCode TV
Dimensional Specifications
3.3 - Throttle Valves
Diameter: 80mm - 100mm Diameter: 180mm - 400mm
Dimensional specifications are given inthe table below
MMaatteerriiaall
Pressed 3mm steel plate, painted inhigh gloss enamel, with six rotorblades and rubber vanesThree phase geared motorDirect coupled shaft with flangedbearing
SSiizzeess
250mm to 2000mm
General Purpose Rotary ValvesCode GPRV
Dimensional Specifications
CapCapacityty at at 20r20rpm, m, 50% fu% full ll pocketckets s
PROPRODUCT UCT CODCODE
A A mm mm
B B mm mm
C C mm mm
D D mm mm
WeWeight kg kg
m3/h/h cfcfm m GPRV250 250 315 1 x 150 350 45 10 6 GPRV500 500 565 3 x 150 415 65 20 12 GPRV750 750 815 4 x 150 415 80 32 19 GPRV1000 1000 1065 6 x 150 415 90 42 25 GPRV1500 1500 1565 9 x 150 415 120 63 37 GPRV2000 2000 2065 13 x 150 580 150 83 49
Capacity at 16rpm,50% full pockets
PRODUCTCODE
Amm
Bmm
Cmm
Dmm
Weight kg
m3/h cfm
3.4 - General Purpose Rotary Valves
Pressure Loss Chart
MMaatteerriiaall
Pressed 3mm steel plate, painted inhigh gloss enamel, with eight rotorblades and rubber vanes Direct coupled rotor shaft withflanged bearing
SSiizzeess
500mm to 1000mm
High Throughput Rotary ValvesCode HTRV
Dimensional Specifications
Capacity at 20rpm,50% full pockets
PRODUCTCODE
Amm
Bmm
Cmm
Dmm
Weightkg
m3/h cfm
CaCapacicity a at 16rpm,m, 50% full p50% full pockets s
PRODPRODUCT UCT CODECODE
A A mm mm
B B mm mm
C C mm mm
D D mm mm
WeiWeight kgkg
m3/h/h cfcfm HTRV500 500 580 4 x 135 525 140 60 35 HTRV750 750 830 5 x 158 525 185 90 53 HTRV1000 1000 1080 8 x 130 610 260 120 71
3.5 - High Throughput Rotary Valves
Pressure Loss Chart
MMaatteerriiaall
Cast iron casing and end platespainted in high gloss enamel, withsix armed mild steel rotor and nylonor vulkolan vanesDirect coupled rotor shaft withflanged bearing
SSiizzeess
250mm and 350mm
AAvvaaiillaabbllee vvaarriiaannttss
Eight armed rotor – airtight to4000mm WG (standard 500mm WG)High temperature bearings – up to250˚CStainless steel rotor
High Pressure Rotary ValvesCode HPRV
Dimensional Specifications
CaCapacipacityty a at 32 32rpm, m, 70%70% f full po pockets ckets
PRODPRODUCT UCT CODECODE
A A mm mm
B B mm mm
C C mmmm
D D mm mm
E E mmmm
F F mm mm
WeiWeight kg kg
m3/h/h HPRV250 250 320 290 799.5 330 970 120 8.75 HPRV350 350 420 390 904.5 400 1124.5 145 27.75
3.6 - High Pressure Rotary Valves
MMaatteerriiaall0.9mm galvanised steel with 2mmsteel plate gate
SSiizzeess80mm to 300mm diameter
OOppeerraattiioonnManually operated
Standard Blast GateCode BG
Dimensional Specifications
Description specifications of the diameter(D) are given in the table below
4.1 - Standard Blast Gate
Description specifications of the length(L) are given in the table below
MMaatteerriiaall0.9mm galvanised steel with 2mmsteel plate gate and flex connection
SSiizzeess80mm to 200mm diameter
OOppeerraattiioonnManually operated
Standard Blast Gate HosetailCode BGHT
4.2 - Standard Blast Gate Hosetail
Dimensional Specifications
Description specifications of the diameter(D) are given in the table below
Description specifications of the length(L) are given in the table below
MMaatteerriiaallGalvanised steel, with steel plategate and polyether PEHD gaskets
SSiizzeess80mm – 200mm
OOppeerraattiioonnManually operated
Sealed Blast Gate Code BGS (to 200mm diameter)
Dimensional Specifications
Dimensional specifications are given in thetable below
4.3 - Sealed Blast Gate 200mm
MMaatteerriiaallGalvanised steel, with steel plategate and polyether PEHD gaskets
SSiizzeess225mm to 400mm
OOppeerraattiioonnManually operated
Sealed Blast Gate Code BGS (225mm – 400mm)
Dimensional Specifications
4.4 - Sealed Blast Gate 250mm - 400mm
MMaatteerriiaallZinc plated steel with flexible rubbergaskets and sealing rings
SSiizzeess80mm to 250mm
OOppeerraattiioonnPneumatic, 5 to 8 barNormal working pressure 0.6mpa
Pneumatic Blast Gate Code BG(size)SP
Dimensional Specifications
4.5 - Pneumatic Blast Gate
Dimensional specifications are given in thetable below
Specification for noise reduction in dB for different frequencies are covered in the adjoining table.
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessAvailable from 100mm to 1250mm
Ducting SilencersCode DS
Code DSB with baffle plate
Noise Reduction Table
4.6 - Ducting Silencers
without baffle with baffle
MMaatteerriiaall0.9mm galvanised steelSupplied with grill
SSiizzeessAvailable in 100mm, 125mm and150mm
Floor SweepsCode FS
Dimensional Specifications
4.7 - Floor Sweeps
MMaatteerriiaall0.9mm galvanised steel
SSiizzeessManufactured to order
Lathe Hood KitsCode LHK
Dimensional Specifications
4.8 - Lathe Hood Kits
MMaatteerriiaallGalvanised steel
SSiizzeessManufactured to orderAvailable from 80mm to 1000mmdiameter
Clean Out DoorsCode COD
Dimensional Specifications
4.9 - Clean Out Doors
MMaatteerriiaallPerspex with 0.9mm galvanised steelcasing
SSiizzeessTo order
Duct windowsCode DW
4.10 - Duct Windows / Air Vents
Duct Windows - Code DW
MMaatteerriiaall0.9mm galvanised steel
SSiizzeess80mm to 200mm
Air VentsCode AV
Dimensional Specifications
Air Vents Code AV
MMaatteerriiaallGalvanised steelFitted with bird mesh, cone andwater outlet
SSiizzeess80mm to 1000mmManufactured to order
Jet CapCode JC
Dimensional Specifications
4.11 - Jet Cap
MMaatteerriiaallPolyester-polyurethane
WWaallll TThhiicckknneessss0.4mm
CCoolloouurrClear
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 100° C
SSuuppeerriioorr TTeecchhnnoollooggyyPolyFlex Light contains a uniqueorganic compound which is added to the Polyurethane and attracts air borne moisture to create a continuous circuit that removes static build up as product movesthrough the duct. PolyFlex Light does not lose its antistatic propertiesas it wears, and the helix does notrequire grounding.
AApppplliiccaattiioonnss Suction of air, dusts, oil and petrolfumes
PPrrooppeerrttiieess • antistatic @ < 10 ohms• excellent flexibility• good abrasion resistance• good compressibility• excellent resistance to oil and
petrol fumes
8
7.1 - PolyFlex Light
PolyFlex LightLight weight and very flexible polyurethane ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
material
spring steel helix
MMaatteerriiaallPolyester-polyurethane
WWaallll TThhiicckknneessss25mm to 99mm = 0.5mm100mm to 500mm = 0.6mm
CCoolloouurrClear
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 100° C
SSuuppeerriioorr TTeecchhnnoollooggyyPolyFlex contains a unique organiccompound which is added to the Polyurethane and attracts air borne moisture to create a continuous circuit that removes static build up as product movesthrough the duct. PolyFlex does notlose its antistatic properties as itwears and the helix does not require grounding.
AApppplliiccaattiioonnss Suction of air, dusts, oil and petrolfumes
PPrrooppeerrttiieess • antistatic @ < 10 ohms• excellent flexibility• good abrasion resistance• good compressibility• excellent resistance to oil and
petrol fumes
8
7.2 - PolyFlex
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
PolyFlexMedium weight and very flexible polyurethane ducting
0.45
0.40
0.35
0.30
0.29
0.28
0.25
0.25
0.25
0.25
0.22
0.20
0.18
0.165
0.15
0.15
0.12
0.12
0.10
0.10
0.10
0.10
0.09
0.09
0.06
0.06
0.06
0.05
0.04
0.02
1.80
1.65
1.50
1.40
1.35
1.30
1.10
1.10
1.10
1.10
0.90
0.80
0.70
0.65
0.60
0.50
0.40
0.30
0.25
0.25
0.25
0.25
0.20
0.20
0.15
0.13
0.12
0.11
0.10
0.08
0.110
0.160
0.180
0.220
0.245
0.270
0.470
0.474
0.474
0.474
0.530
0.590
0.650
0.720
0.790
0.850
0.980
1.050
1.180
1.272
1.364
1.456
1.670
1.880
2.050
2.250
2.450
2.650
2.850
3.250
material
spring steel helix, PVC coated
MMaatteerriiaallPolyester-polyurethane
WWaallll TThhiicckknneessss25mm – 39mm = 0.8mm40mm – 99mm = 1.0mm100mm – 139mm = 1.15mm140mm – 210mm = 1.2mm215mm – 500mm = 1.4mm
CCoolloouurrClear
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 100° C
SSuuppeerriioorr TTeecchhnnoollooggyyPolyFlex Heavy contains a uniqueorganic compound which is added to the Polyurethane and attracts air borne moisture to create a continuous circuit that removes static build up as product movesthrough the duct. PolyFlex Heavydoes not lose its antistatic propertiesas it wears and the helix does notrequire grounding.
AApppplliiccaattiioonnss Suction of abrasive materials andtransport of granules
PPrrooppeerrttiieess • antistatic @ < 10 ohms• solid construction• good oil resistance• excellent abrasion resistance
smooth bore
8
7.3 - PolyFlex Heavy
PolyFlex HeavyHeavy weight and flexible Polyurethane ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
material
spring steel helix, PVC coated
7.2a 01cFlex
Material Polyelhe<-Polyurethane
Wall Thickness 8011l!l lo 140mm = 0.6511l!l 160mm to 50011l!l = 0.80mm
COiour Clear
Single Length 10m rOlls / can cut length to O(der
Temperature Resistance - 40'C up to + 1 00'C
Application Suction of dust and particles in woodwooongindustnes, especially used on CNC prooessing centres.
Properties - Flame retardant act()(ding to DIN 410281
- Resi
stant to hydrolysis and nicrobes - Good abrasion resistance- Excellent flexibility- Resistant to oil and patrols- Free of halogen and softeners- Electrically conductive according toBGI 739-2 by grounding the wire
CncFlex Medium wei9ht ond very flexible polyurelhone ductin9
material
I
�ZZ�\\�11�\�
Technical Data Further diameters. ava1lable upon request Technical dala are based on +2o·c.
PRODUCT Internal Weight
CODE Diameter kg/m
CNCFLEX80 82mm 0.65
CNCFLEX100 102mm 0.80
CNCFLEX120 127mm 0.95
CNCFLEX140 140mm 1.11
CNCFLEX160 160mm 1.79
CNCFLEX180 180mm 2.00
CNCFLEX200 203mm 2.22
CNCFLEX250 254mm 2.76
CNCFLEX300 300mm 3.30
CNCFLEX325 325mm 3.57
CNCFLEX350 356mm 3.84
CNCFLEX400 406mm 4.38
CNCFLEX450 456mm 4.92
CNCFLEX500 508mm 5.46
spring steel helix, PVC coated
Bend Rad Max work Max mm Pressure bar Vaet1um bar
80 0.35 0.20
100 0.30 0.15
120 0.30 0.12
140 0.20 0.10
160 0.20 0.08
180 0.15 0.07
200 0.15 0.05
250 0.10 0.04
300 0.05 0.03
325 0.03 0.03
350 0.02 0.02
400 0.02 0.02
450 0.01 0.01
500 0.01 0.01
MMaatteerriiaallPolyurethanethickness 1.4mm
WWaallll TThhiicckknneessss1.4mm
CCoolloouurrClear with a green helix
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 100° C
SSuuppeerriioorr TTeecchhnnoollooggyyGranuFlex contains a unique organic compound which is added to the Polyurethane and attracts airborne moisture to create a continuous circuit that removes static build up as product movesthrough the duct. GranuFlex doesnot lose its antistatic properties as it wears and the helix does not require grounding
AApppplliiccaattiioonnss Suction and discharging of abrasivematerials, especially in the grain andplastics industries
PPrrooppeerrttiieess• antistatic @ < 10 ohms• very smooth bore• excellent abrasion resistance• resistant to oil and petrols• non toxic• free of halogen and softeners
8
7.4 - GranuFlex
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
GranuFlexHeavy weight and flexible polyurethane ducting
material
spring steel helix
MMaatteerriiaallPolyester-polyurethane
WWaallll TThhiicckknneessss25mm – 99mm = 0.5mm100mm – 500mm = 0.6mm
CCoolloouurrClear
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 100° C
SSuuppeerriioorr TTeecchhnnoollooggyyFoodFlex contains an organic compound which is resistant tomould, fungus microbes and hydrolysis. Being built into the product it continues to perform evenas the wall deteriorates during use,unlike others with a simple coatingof inhibitors.
AApppplliiccaattiioonnss Suction and transport of light weight materials in food and pharmaceutical industries
PPrrooppeerrttiieess• resistant to hydrolysis and
microbes• solid construction• good oil resistance• excellent abrasion resistance• smooth bore
7.5 - FoodFlex
FoodFlexMedium weight and flexible Polyurethane food grade ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
material
spring steel helix
MMaatteerriiaallPolyvinyl Chloride (PVC)
WWaallll TThhiicckknneessss0.4mm
CCoolloouurrClear
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee0° up to + 70° C
AApppplliiccaattiioonnss Suction of air, fumes and light dusts
PPrrooppeerrttiieess • excellent flexibility• good compressibility
8.1 - ClearFlex
ClearFlexLight weight and very flexible PVC ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
0.40
0.40
0.40
0.40
0.35
0.35
0.35
0.30
0.25
0.23
0.20
0.18
0.15
0.08
0.06
0.05
0.05
0.04
0.03
0.02
0.02
0.02
0.01
0.01
0.20
0.20
0.10
spring steel helix
material
MMaatteerriiaallPolyvinyl Chloride (PVC)
WWaallll TThhiicckknneessss13mm to 99mm diameter - 0.5mm100mm to 400mm diameter - 0.6mm
CCoolloouurrClear
SSiinnggllee LLeennggtthh 10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee0° up to + 70° C
AApppplliiccaattiioonnss Low pressure air, fume and dust handling and cable conduit
PPrrooppeerrttiieess • high flexibility• smooth bore
8.2 - ClearFlex - Heavy
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
ClearFlex HeavyMedium weight and flexible PVC ducting
0.110
0.170
0.240
0.265
0.290
0.460
0.630
0.700
0.750
0.790
0.890
0.980
1.180
1.435
1.690
2.100
2.520
2.930
1.90
1.70
1.40
1.35
1.30
1.05
0.80
0.70
0.65
0.60
0.50
0.40
0.25
0.23
0.20
0.15
0.12
0.10
0.55
0.45
0.30
0.29
0.28
0.24
0.20
0.18
0.17
0.15
0.13
0.12
0.10
0.10
0.09
0.08
0.06
0.06
spring steel helix, PVC coated
material
Characteristics:
Other:
LiquiFlex Eximo Liquif/ex the one hose for all liquid transfer needs.
Liquiflex has high resistance to Internal pressure, which means one hose for numerous diverse
applications including a number in the food and beverage industry. Crush Resistant it can
withstand extremes of temperature, hot and cold. Liquiftex is clear food grade PVC with a red
anti-shock PVC Reinforced Helix.
Technical Data ur t ,;r ramaters avarlabla upon request
Technical da � arc based on +2o•c
Code Dia - ID
mm
LiquiFlex035 35
LiquiFlex038 38
LiquiFlex040 40
LiquiFlex050 50
LiquiFlex060 60
LiquiFlex063 63
LiquiFlex070 70
LiquiFlex080 80
LiquiFlex090 90
LiquiFlexl00 100
LiquiFlex120 120
LiquiFlex150 150
Dia - OD Weight Bend Max Max
mm kg/m Radius Work press Vacuum
mm Bar Bar
43.0 0.60 225 9.00 0.90
48.6 0.76 260 9.00 0.90
50.6 0.76 260 9.00 0.90
59.0 1.05 270 8.00 0.90
69.4 1.24 300 8.00 0.85
72.4 1.24 300 8.00 0.85
80.2 1.65 380 7.00 0.85
92.0 1.88 400 7.00 0.85
103.0 2.20 450 5.00 0.85
114.0 2.80 500 4.00 0.85
136.0 3.60 600 4.00 0.80
168.0 5.13 750 3.00 0.80
8.3 - TempVent / Antistatic
MMaatteerriiaallPVC-coated-polyester fabric
WWaallll TThhiicckknneessss0.6mm
CCoolloouurrSafety yellow
SSiinnggllee LLeennggtthh3, 5, 6, 10 & 12m
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 80° C
AApppplliiccaattiioonnss Air-conditioning and ventilation inheavy duty environmentscooling and heating of tentssuction of dust and solvent fumes
AAvvaaiillaabbllee vvaarriiaannttssAvailable in combinations of cuffends for fixing to spigots and endrings for joining individual lengthswith quick release clamps
PPrrooppeerrttiieess • good flexibility• flame retardant• good compressibility• outer wearstrip profile
TempVentLight weight flexible PVC ventilation ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
1.200
1.200
1.200
1.200
1.440
1.440
1.440
1.440
1.440
2.675
2.675
2.675
2.675
3.300
3.300
3.300
3.300
0.550
0.550
0.550
0.550
0.350
0.350
0.350
0.350
0.350
0.225
0.225
0.225
0.225
0.200
0.200
0.200
0.200
spring steel helix
end ring
material
Antistatic
1.440
1.440
1.440
1.440
2.675
2.675
2.675
2.675
3.300
3.300
3.300
3.300
0.350
0.350
0.350
0.350
0.225
0.225
0.225
0.225
0.200
0.200
0.200
0.200
AAnnttiissttaattiicc
MMaatteerriiaallReinforced PVC
CCoolloouurrWhite / other colours to order
LLeennggtthh15, 25, 50m standard, other lengthsavailable on order up to 100m
TTeemmppeerraattuurree RReessiissttaannccee– 0° up to + 50° C
AApppplliiccaattiioonnss Forced ventilation in mining and tunnelling
AAvvaaiillaabbllee vvaarriiaannttssComes with suspension strip, hooksand wires available with cuff couplings or endrings
PPrrooppeerrttiieess • antistatic• light weight• flame retardant• rot resistant
8.4 - TempVent LayFlat
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
TempVent LayFlatAntistatic, flame retardant, layflat ducting
Antistatic
MMaatteerriiaallThermoplastic rubber
WWaallll TThhiicckknneessss0.4mm
CCoolloouurrBlack
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 150° C
AApppplliiccaattiioonnss Suction of chemical fumes and gaseseven under mechanical influence
PPrrooppeerrttiieess • very good chemical resistance to
fumes of acids and solvents• UV and ozone resistant• rot proofed• withstands severe flexing
9.1 - SunFlex
SunFlexUV resistant light weight and very flexible thermoplastic rubber ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
0.090
0.140
0.160
0.210
0.250
0.250
0.310
0.330
0.445
0.560
0.700
0.730
0.680
0.820
1.270
1.600
1.450
1.550
1.780
2.000
2.250
0.45
0.40
0.35
0.35
0.35
0.35
0.20
0.20
0.20
0.15
0.13
0.12
0.11
0.09
0.08
0.07
0.05
0.04
0.04
0.03
0.03
0.20
0.20
0.15
0.10
0.08
0.08
0.07
0.06
0.06
0.05
0.04
0.04
0.04
0.03
0.02
0.02
0.01
0.01
0.01
0.01
0.01
spring steel helix
material
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
MMaatteerriiaallThermoplastic rubber coated-polyester fabric
WWaallll TThhiicckknneessss0.4mm
CCoolloouurrBlack
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 150° C
AApppplliiccaattiioonnss Suction of exhaust fumes, chemicalfumes and gases even undermechanical influence
PPrrooppeerrttiieess • very good chemical resistance to
fumes of acids and solvents UVand ozone resistant
• rot proofed• withstands severe flexing• compatible with over floor reel
systems• fully crush recoverable
ExFlexLight weight and very flexible THERMOPLASTIC RUBBER ducting
polyamide helix
material
9.2 - ExFlex
wear strip profile
85 0.41100 0.53105 0.69190 0.87250 1.20300 1.44
MMaatteerriiaallPVC-coated-polyester fabric
WWaallll TThhiicckknneessss0.2mm
CCoolloouurrGrey
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 30° up to + 100° C
AApppplliiccaattiioonnss Air-conditioningsuction of air, welding fumes andlight dusts
PPrrooppeerrttiieess • abrasion resistant outer
helix• Available in flame retardant
according to DIN-4102• good compressibility
10.1 - WeldFlex
WeldFlexLight weight and very flexible PVC ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
spring steel helix
material
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
MMaatteerriiaallSilicone coated glass fabric
WWaallll TThhiicckknneessss0.4mm
CCoolloouurrSilver-grey
SSiinnggllee LLeennggtthh10m rolls / cut lengths to order
TTeemmppeerraattuurree RReessiissttaannccee– 60° C to + 300° C.
AApppplliiccaattiioonnssSuction of hot fumes, gases or dustsin all fields of industry
PPrrooppeerrttiieess• excellent temperature resistance• flame retardant• abrasion resistance outer helix• excellent axial compressibility
HotFlexLight weight and very flexible silicone ducting
spring steel helix
material
10.2 - HotFlex
MMaatteerriiaallPolyethylene
CCoolloouurrYellow-black
SSiinnggllee LLeennggtthh20m rolls other lengths available onorder
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 60° C
AApppplliiccaattiioonnss Suction and conveyance of liquidsand materials especially in sanitary,sewer pumping and heavy dutyindustrial
CCoonnnneeccttoorrss A full range of camlocks and bauercouplings available
PPrrooppeerrttiieess • fully crush recoverable• excellent chemical resistance• light weight• good flexibility• good compressibility• outer wearstrip profile.
11.1 - YellowBelly
YellowBellyLight weight and flexible high vacuum polyethylene ducting
Technical DataFurther diameters available upon request.
Technical data are based on +20˚C.
cap profile
base profile
Technical DataFurther diameters available upon request.Technical data are based on +20˚C.
MMaatteerriiaallPolyethylene
CCoolloouurrBlack
SSiinnggllee LLeennggtthh10m rolls other lengths available onorder
TTeemmppeerraattuurree RReessiissttaannccee– 40° up to + 60° C
AApppplliiccaattiioonnss Suction and conveyance of liquidsand dry materials especially in heavy duty industrial
CCoonnnneeccttoorrss A full range of camlocks and bauercouplings available
PPrrooppeerrttiieess • antistatic @ < 10 ohms• fully crush recoverable• excellent chemical resistance• light weight• good flexibility• good compressibility• outer wearstrip profile
3
YellowBelly No-BiteLight weight and flexible high vacuum antistatic polyethylene ducting
11.2 - YellowBelly No - Bite
cap profile
base profile
5 Bremen Drive, Salisbury South 5106 SA. 08 8281 1211Fax: 08 8281 [email protected]
INDUSTRIESAB
CONTACT INFO
5 Bremen Drive, Salisbury South 5106, SA.
Phone: (08) 8281 1211
Fax: (08) 8281 7443
Website: www.abindustries.com.au
E-mail: [email protected]
WWW.ABINDUSTRIES.COM.AU