VENTIL TEST EQUIPMENT B.V.

Oder 1 (Forepark)

2491 DD Den Haag

The Netherlands

T. +31 70 3209327

F. +31 70 3203737

E. sales@venti l .n l

ABN-AMRO Bank Account. No.: 41.20.17.652 - VAT No: NL801688279B01 - Chamber of Commerce Den Haag Reg. No: 27140421

INNOVATORS IN VALVE TESTING

VENTIL TEST UNITS

FOR BUTTERFLY VALVES

Ventil manufactures a wide variety of test units for pressure- and performance testing of butterfly

valves in the range 1 – 86”.

A) RANGE

Although it is possible to manufacture a test unit for a

extended range of diameters, the majority of the

customers prefers to have a certain limited range. This

generally corresponds with a certain production line and

enables us to accommodate the range of butterfly valves

with top flanges, gear boxes or actuators. By limiting the

range, the test units can be designed and equipped for its

specific purpose and the valves are quickly and easily

positioned, clamped and tested without placing any

adapters or resetting of the clamping system. The common

working ranges are:

• 1 – 8”

• 8 – 16”

• 16 – 28”

• 28 - 48”

• 48 - 86”

Please state the required range(s):

VENTIL TEST EQUIPMENT B.V.

Oder 1 (Forepark)

2491 DD Den Haag

The Netherlands

T. +31 70 3209327

F. +31 70 3203737

E. sales@venti l .n l

ABN-AMRO Bank Account. No.: 41.20.17.652 - VAT No: NL801688279B01 - Chamber of Commerce Den Haag Reg. No: 27140421

INNOVATORS IN VALVE TESTING

B) APPLICATION

The installed test system can be adapted to maximum pressure class. We therefore ask you to state

the required pressure classes:

Minimum size and pressure class for each range:

Biggest valve in the highest pressure class for each range:

Types (Waver / double flanged / Rubber lined / High performance:

C) POSITION

For easy and accurate positioning, clamping and testing these test units features a vertical clamping

system (valve spindle horizontal). Smaller valves up to 8” can be positioned by hand. Bigger valves

need to be positioned by crane and commonly the test unit is than completed with a transport table

(see pic 2) to place the valve externally and slide it into the clamping system.

Alternatively the units can be completed with eccentric clamping (see pic 3). In this case the top flange

is always positioned outside and no spacer adapters are required for the top flange, actuator or

gearbox.

A second possibility is to have a double clamping table. This enables the operator to already place to

second valve, while the first is being tested.

VENTIL TEST EQUIPMENT B.V.

Oder 1 (Forepark)

2491 DD Den Haag

The Netherlands

T. +31 70 3209327

F. +31 70 3203737

E. sales@venti l .n l

ABN-AMRO Bank Account. No.: 41.20.17.652 - VAT No: NL801688279B01 - Chamber of Commerce Den Haag Reg. No: 27140421

INNOVATORS IN VALVE TESTING

OPTIONAL PARTS AND SYSTEMS;

Please state your preference:

1) SEMI AUTOMATIC OR FULL AUTOMATIC

The Ventil test unit can be completed with 3 different operation systems;

• Fully manual

Simple, but effective hand operation. The operator controls the test procedure and decides if the

valves is ‘pass‘ or ‘fail’.

• Touch screen

The operator selects the valve and the pre-programmed procedure from the menu starts the test.

The system automatically fills the valve and executes the test procedure. The system gives a pass

/ fail signal.

• Computer Registration

The operator selects the valve from the valve management system and starts the test. The system

automatically fills the valve and executes one test or a total test sequence. The system gives a

pass / fail signal. The total test sequence can be programmed for each valve by yourselves.

Please state your preference

2) VISUAL INSPECTION

Optionally the clamping system features an

inspection facility for visually detecting seat

leakage by looking on the seat on the outlet side.

VENTIL TEST EQUIPMENT B.V.

Oder 1 (Forepark)

2491 DD Den Haag

The Netherlands

T. +31 70 3209327

F. +31 70 3203737

E. sales@venti l .n l

ABN-AMRO Bank Account. No.: 41.20.17.652 - VAT No: NL801688279B01 - Chamber of Commerce Den Haag Reg. No: 27140421

INNOVATORS IN VALVE TESTING

3) VALVE OPERATION (AVPS)

Optionally each test unit can be completed with a valve

operation and torque (AVPS) system. This hydraulic and

computer operated system opens and closes the valve in

between the body and seat test and can measure the force

for opening and closing. The available range is 0 – 50,000

Nm.