Pag

e1

DPV MIL PTR2015 NATO- spc

TECHNICAL VEHICLE & ACCESSORIES DESCRIPTION

2015

VERSION: T-ATV 1200 MIL SPECS MODEL: 2015 REV AFX COLOUR: Mil specs

Document Control

Name Division Date

Author W. Meyer, SAND-X Motors Land Systems Sales 01.08.2014

Checked by SAND-X Motor Land Systems U. Eiselin

CEO 01.08.2014

Approved by SAND-X Motor Land Systems U. Eiselin

CEO 01.08.2014

Latest changes

Pag

e2

T-ATV 1200 MIL SPECS

PACKAGE HIGHLIGHTS

1200cc Rotax 4 stroke engine, Fuel injection, Automatic transmission, manual reverse, electrical start, Split RD liquid cooling system incl. Air-intake cool-X, 4 pistons breaking system, 42ltrs fuel tank, wide-stance roll over reduction, low pressure All Terrain tyres, SAND-X V fuel control, DESS key (digitally encoded security system) KYB Pro 36 aluminium rear shock with dual-speed and Aluminium Idle wheel, compression adjusters, Lightweight All Terrain track, Lightweight chrome front suspension lower A-arm, HPG Plus R aluminium front shocks with no-tool rebound adjuster, 285-mm / 12-inch low windshield with wind deflectors, Multi-function digital gauge with display, Electric fuel gauge This document, and the information contained herein is the intellectual property of SAND-X Motors. It is to be used only in conjunction with the specific proposal, contract, system or

equipment for which it was meant, and may not be used for any other purpose. The copyright has been applied to every page. SAND-X Motors reserves all rights to this document, also in the event of application for patents or registry of patents or designs. None of the information contained herein may be disclosed to third parties, nor may be reproduced, copied or transmitted in any way, shape or form, or by any means, electronic, mechanical, or otherwise, without the prior written permission of SAND-X Motors.

Pag

e3

SPECIFICATIONS

ENGINE Engine type Rotax 1203, liquid cooled, 4-Stroke,

D.O.H.C. with balancer shaft, dry sump Cylinders 3 Horsepower 130 (97kw) Displacement 1170.7 cc (71.4 in3) Bore 91 mm (3.58 in) Stroke 60 mm (2.36 in) Maximum horsepower engine RPM 7800 RPM Fuel injection system Multi point EFI, 52 mm

Throttle body Exhaust system Exhaust pipe, muffler Engine oil 10W60 synthetic 4-stroke oil Engine oil tank capacity Oil change with filter:

3.5 L (3.7 U.S quarts) Coolant Ethyl glycol/water mix (50%

coolant, 50% distilled water). Recommended fuel type Regular unleaded Fuel tank capacity 40 L (10.6 U.S. gal) Fuel Consumption 12.1 litres / 100 km DRIVE SYSTEM Drive pulley type TRA III Driven pulley type QRS Engagement 2800 RPM Small sprocket number of teeth 24 Large sprocket number of teeth 43 Drive sprocket number of teeth 8 Chaincase oil XP-S synthetic chaincase oil Chaincase oil capacity 250 ml (8.5 U.S. oz) DRIVE SYSTEM Brake system Hydraulic REV-XP brake type Brake system fluid DOT 4 Track nominal width 381 mm (15 in) Track nominal length 3051 mm Track profile height 31.8 mm (1.25 in) Track tension Deflection 30 - 35 mm (1-3/16 - 1-3/8 in)

Force (1) 7.3 kg (16 lb) ELECTRICAL SYSTEM Battery 18 A Lightning system output 12V/490 W Headlights bulb HI/LOW beam 2 x 60/55 Watts (H-4) Taillight bulb 2 x P 21/5 W Spark plug Type NGK CR8EKB (2)

Gap Not adjustable

Pag

e4

Fuses F1: Cluster 15 A F2: Fuel pump/starter solenoid/C.A.P.S.10 A F3: Cylinder 3 5 A F4: Cylinder 2 5 A F5: Cylinder 1 5 A F6: Taillight 20 A F7: Headlights 15 A F8: E-Reverse 20 A F9: Start button/clock 5 A F10: Rear accessories 15 A F11: Fans 20 A

SUSPENSION Front suspension REV-XP Front shock HPG clicker T/A aluminium Front suspension max. travel 229 mm (9 in) Rear suspension SC-5 Front arm shock X HPG T/A aluminium Rear arm shock HPG T/A aluminium Rear suspension max. Travel 381 mm (15 in) DIMENSIONS AND WEIGHT Vehicle overall length 2905mm (114.4 in) Vehicle overall width 1577 mm (62.1 in) Vehicle overall height 1217 mm (49.1 in) Seat height 780 mm (31.0 in) Dry weight 236 kg (520 lb) Max weight* 664 kg (1464 lb Max. payload 428 kg (incl. driver) * equipment, max. payload, all necessary operating consumables (e.g., motor oil and coolant), a full tank of fuel, incl. the weight of a 75 kilogram driver to follow European Directive 95/48/EC * equipment, max. payload, all necessary operating consumables (e.g., motor oil and coolant), a full tank of fuel, incl. the weight of a 75 kilogram driver to follow European Directive 95/48/EC OFF-ROAD CHARACTERISTICS: Approach angle* > 48 Departure angle 72 Ground clearance** not relevant track operated Turning Radius 6.3 m * approach angle can be increased by shifting the bodyweight towards the back of the vehicle when approaching an obstacle ** no ground clearance necessary due to the T-ATV Track-system

OPERATION OUTSIDE TEMPERATURES: from -35 c to + 60c

Pag

e5

EPA EMISSION STANDARTS: SAND-X T-ATV 1200 4-STROKE

Best Available Technology (BAT) Requirements

All Terrain Vehicle Air Emissions (g/kW-hr) Sound Emissions (dBA) Hydrocarbons Carbon Monoxide

Average 2-Stroke (Non-BAT) 150 400 78

EPA ATV Air Emission Requirements1 75 275

NPS BAT Requirements 152 120

3 73

4

2011 / 2012 SAND-X T-ATV ROTAX 1200 4-STROKE

FEL: 10 FEL: 119 72.6 - 75.1

1 EPA Family Emissions Limits (FEL) for ATVs are 75 for Hydrocarbons and 275 for Carbon Monoxide (2010 and 2011 model

years). (See Federal RegisterVol. 73, No. 123, Wednesday, June 25, 2008, page 35946) 2 Hydrocarbons: certified by EPA to a Family Emissions Limit (FEL) of 15 g/kW-hr or less.

3 Carbon Monoxide: certified by EPA to a Family Emissions Limit (FEL) of 120 g/kW-hr or less. Air emission figures for carbon

monoxide and hydrocarbons presented are either the Official Test Results (OTR) or the certified FEL. The Official Test Results are actual measured emissions. FEL's are not-to-exceed levels as certified byEPA.

4 Society of Automotive Engineers

testing procedures allow for a 2 dB tolerance over the sound level limit to provide for variations in test site, temperature gradients, wind velocity gradients, test equipment, and inherent differences in nominally identical vehicles. (It has been observed that under some test site conditions, variability in test results greater than 2 dB can be experienced.) Sound emission figures represent an average of Official TestResults.

5 YellowstoneBAT certification will expire at the end of the

2012

ATV All Terrain vehicle. Its key features include light weight, low emissions, wide power band and smooth running of the

engine. The motor is equipped with an electronic fuel injection system and its power band is wider than that of our

competitors corresponding models. There is plenty of torque throughout the entire power band (119Nm / 7500 rpm),

thanks to which the engine delivers good acceleration. The NER value indicating the EPA emissions of the engine is zero.

The Rotax 4-TEC 1200 is an electronic fuel-injected three cylinder engine which boasts plenty of torque, higher low-end torque for better acceleration and low emissions with industry leading fuel economy and a distinct performance sound. SAND-X T-ATs built on the lightweight REV-X platform and equipped with the Rotax 4-TEC 1200 engine have lower emissions with virtually no smoke or smell making it one of the cleanest in the industry with the United States' Environmental Protection Agency's normalized emissions rating of zero

Pag

e6

ACCESSORIES CATALOG

ITEM NUMBER DESCRIPTION 901214071 BASE PROTECTION PLATE MILITARY FRONT

901214072 AXLE PROTECTION PLATE LEFT & RIGHT

901214767 ELEC. WINCH 1500LBS MIN. CAPACITY

901214801 EQUIPMENT RACK BACK

901214810 REAR TRAILER HOOK SYSTEM

901214060 PROTE-X BALLISTIC WINDSHIELD SYSTEM

901214073 DUSTSHIELDS FRONT L+R

901214001 FRONT TIRE RUNFLAT SYSTEM

901214010 GPS NAVIGATION SYSTEM

901213061 FR. GUN RK INCL. ROT. SWINGARM

901214063 ROTATABLE REAR M60 MACHINE GUN STAND

901214064 M60 CONNECTOR ADAPTER INCL. PINTLE

901214065 BALLISTIC RADIATOR SIDE PROTECTION

901214011 INFRARED FRONT LIGHT

Pag

e7

901214071 BASE PROTECTION PLATE MILITARY FRONT

Non-armoured 5mm Impact plate designed in cooperation with the German Special Forces KSK. Base protection plate against mechanical impacts from surface objects. 5mm Aluminium prevents the vehicle from damages on the engine and chassis of the vehicle during operation. This is NOT a ballistic protection.

Scope of delivery: - 5mm Base protection Plate

- Installation package

901214072 AXLE PROTECTION PLATE LEFT & RIGHT

Non-armoured 5mm Aluminium Left & Right axle swing arm protection plates against impacts from surface objects. This system prevents the vehicle from damages on the steering system from mechanical impacts. This is not a ballistic protection.

Scope of delivery: - 5mm Base Axle protection set (left & right)

- Painted in vehicle color

- Installation package

Pag

e8

901214767 ELEC. WINCH 1500LBS MIN. CAPACITY

the Warn Vantage 2000-S includes lightweight, easy-to-handle synthetic rope, best-in-class performance, and 907 kg of pulling capacity. You'll ride the trails with confidence knowing you can get out of a "stuck" situation. This winch is also great for plow lifting.

15m x 4mm synthetic rope with black powder-coated hawse fairlead

Fully sealed motor and drive train to keep the elements out

Differential planetary gear train, dynamic brake.

High strength composite end housing

Permanent magnet motor

Includes handlebar-mounted mini rocker control

CE Compliant

SAND-X T-ATV front bumper Standard (not winch compatible)

Pag

e9

Winch compatible T-ATV front bumper

Scope of delivery: - Winch compatible vehicle front

- Electrical Winch 12V min. 1500lbs

- Winch installation

- Wiring 12 V

- Handlebar control panel installation

- Chassis installed front plug

Pag

e10

901214801 EQUIPMENT RACK BACK

Multipurpose equipment rack for storage, ammunition carriage and other purposes. The Equipment rack, specially designed for the T-ATV 1200 vehicle, can be used in combination with armament solutions, back footrests and towing systems.

Scope of delivery: - Steel welded Equipment rack

- Painted in vehicle color

- Armament, footrest and towing system preparations (if

combined with any)

Pag

e11

901214810 REAR TRAILER HOOK SYSTEM

T-ATV1200 designed Rear Trailer hook towing system, can be combined with rear footrests from the Rear Armament solutions. The towing system is equipped with a 2" Hitch Ball and chassis included steel strengthening panels.

Scope of delivery: - Steel welded U-bar

- Painted in vehicle color

- Removable / replaceable 2 Hitch ball

- Chassis Steel strengthenings left & right

- Armament, footrest and towing system preparations (if

combined with any)

Pag

e12

901214060 PROTE-X BALLISTIC WINDSHIELD SYSTEM

PROTECTION LEVEL B6 Ballistic glass B6 Ballistic steel

B6 armoring is a level of protection specified in the CEN ballistic guidelines (European Normalization). It specifies that the material can defeat multiple 7.62x51mm assault rifle rounds. This system requires export certification from the Ministry of Foreign Affairs in the United Arab Emirates.

Scope of delivery:

- Chassis Strengthening XL

- Modification of the side panels

- Ballistic front Windshield

- Ballistic side triangular side-shields

- Certification of the Ballistic parts

Pag

e13

901214073 DUSTSHIELDS FRONT L+R

Lightweight left & right side dustshields for the use of the vehicle in wet conditions. Scope of delivery:

- Lightweight Dustshields (left & right)

- Painted in vehicle color

- Cross beam installation

901214001 FRONT TIRE RUNFLAT SYSTEM

Tire pressure can be adjusted to suit the riders need and the terrain just like normal with the T-ATV1200 Runflat solution. The high perform foam inserts are only in use when the tire is compressed or a puncture occurs. The system is made to protect the tire and rim in the event of a tire puncture and allow you to ride at a reduced speed to your pit, camp or transport vehicle to make necessary

Pag

e14

repairs. Until a tire puncture occurs, the inserts ride inside the tire casing and regular air pressure supports your tire sidewall, so you can adjust pressure as you need just like normal!

The T-ATV1200 Runflat system is designed to assist in carrying the vehicle load on the tire sidewall in the event of a tire puncture. Materials consisting of open cell, high impact, and high density foam help to support the height and width of the tires. If a tire puncture occurs, Inserts assist in keeping the tire bead from coming off the rim and help prevent additional tire and rim damage by supporting the tire sidewall load.

Scope of delivery: - Runflat inserts for Tire Size 22 x 7 R10

- Operation ready installed

901214010 GPS NAVIGATION SYSTEM

Garmin Monterra Very rugged, portable, multi-functional GPS device with extra large color display, based on the Android operating system. Supports wireless networks. Highly suitable as hand held device and as navigation device in vehicles. Fast change between different user interfaces and operation modes through adjustable profiles, shortcuts and dashboards. Rich feature set and very easy to use. Graphical interface with multi-touchscreen. Supports the US GPS and the Russian GLONASS satellites. 4" color multi-touch display Built-in 3-axis electronic compass Built-in 8 megapixel autofocus digital camera Rugged and durable ArmorSuit MilitaryShield - Garmin Monterra GPS Screen Protector Shield Compatibility - Specifically designed for Garmin Monterra 010-01065-00 (4-Inch) Only

Pag

e15

Long-Lasting Protection from Scratches, Bubble Free, Significantly Reduces Dust, Oil & Fingerprint Smudges Exceptionally Clear & Smooth Glass-Like Surface Self-Healing Technology & Military Grade Material Designed to be Ultra Tough for your device Amps Rugged Mount with aud.-power

GPS map Egypt for Garmin Navigation systems The Egypt map from the OpenStreetMap project provides excellent routable roadmaps for Egypt. These maps are converted to use them legal and free of charge on any Garmin GPS device. Since the Open Street Map project is open source and depending on the contributions of users to gather the map data, it is not complete for some regions. General the maps are great for routing especially in cities and on main overland routes. Scope of delivery:

- Garmin Monterra GPS Navigation System

- ArmorSuit MilitaryShield Screen Protector

- Amps Rugged Mount with aud.-power - Egypt maps installed - Vehicle Wiring / installation

- SAND-X T-ATV Cockpit GPS Carrier preparation

Pag

e16

901213061 FR. GUN RK INCL. ROT. SWINGARM System Description: The T-ATV1200 MIL Front Gun Rack Incl. Rotatable Swingarm is a double-articulated arm that incorporates an integrated travel lock, friction locks and improve lanyards for the Quick-Release Pins. The Swing Arm allows the driver a safe and convenient arms operation away from the mounting source and efficient transportation of the designated weapon solution. System requirement for the installation of the T-ATV1200 MIL Front Gun Rack Incl. Rotatable Swingarm:

- T-ATV1200 side equipment carriage (Illustration 2.0)

A. Rotatable Swingarm Assy Side Equipment Carriage

Elevation angle: Given level elevation angle when the armament is used

connected to the side armament carriage. Armament can be released quickly from installation to be used handheld without any elevation angle restrictions.

Field of view: 90 Degrees Firing unit: MANUAL: at the weapon

Controlling the weapon: 1. MANUAL: use of the weapon released from the side

armament carriage.

Pag

e17

2. MANUAL: use of the swingarm installed weapon on a given elevation level. Field of view up to 90 Degrees.

Scope of delivery:

- Rotatable Swing-arm assembly

- Vehicle side equipment carriage

- Four (4) sealed bearings,

- Stop Locks

- Fast release bolts

- Aluminum weapon holder

Specifications:

Material: MS STEEL by CNC Bearings: four (4) Brand: SKF

Payload: 15 kg Color: Desert camo TECHNICAL DRAWING 901213061 FRONT GUN RACK INCL. ROTATABLE SWINGARM Patent pending Intl. patent application filed at the Swiss federal patent office CH-3003 Berne

Pag

e18

901214063 ROTATABLE REAR M60 MACHINE GUN STAND System Description: Vehicle installed, telescopic weapon carrier and operations solution for rearward sitting passenger during operations or driver-usage on stop position. Foot-rests for optimum grip and stability of the rifleman when operating the weapon on the tripod.

Field of view 180 Degrees Elevation angle: 45 Degrees Firing unit: MANUAL at the weapon Controlling the weapon: 1. Manual use of the weapon installed on rear tripod.

2. Manual use of the weapon released from the rear tripod Infinitely variable telescopic gear-adjustment: (+ - 10 cm)

Pag

e19

Scope of delivery: - MS Steel construction Rotatable Stand

- Height adjustment gear system

- Shock absorber plate

- Back footrests (4)

- stand cover

Specification: Material: MS STEEL

Bearings: two (2) Brand: SKF Payload: 55 kg Color: Desert camo TECHNICAL DRAWING 901214063 ROTATABLE REAR M60 MACHINE GUN STAND Patent pending Intl. patent application filed at the Swiss federal patent office CH-3003 Berne

Pag

e20

901214064 M60 CONNECTOR ADAPTER INCL. PINTLE PINTLE MOUNT

MACHINE GUN MOUNT

This system, made in the USA, requires export certification from the Ministry of Foreign Affairs in the United Arab Emirates.

Scope of delivery:

- M60 PINTLE MOUNT

- M60 Machine Gun Mount

Pag

e21

901214065 BALLISTIC RADIATOR SIDE PROTECTION

RADIATOR SIDE PROTECTION LEVEL:

B6 Ballistic steel B6 armoring is a level of protection specified in the CEN ballistic guidelines (European Normalization). It specifies that the material can defeat multiple 7.62x51mm assault rifle rounds.

Scope of delivery:

- Chassis Strengthening XL

- Radiator mounting upgrade

- Ballistic Radiator Side Protection Left & Right

- Certification of the Ballistic parts

Pag

e22

901214011 INFRARED FRONT LIGHT

This Infrared lights were developed to do their duty in the harshest environments and with features not found on other vehicle lights, while enhancing soldier safety. The light is now an installed factory kit on many new Humvees and can be ordered for Humvees and many other vehicles as a retrofit. This illuminator is popular where extreme use is commonplace. The professional installation of the Infrared Lights on the T-ATV1200 includes a special designed front radiator protection rack incl. Infrared light mounting and cable conduit to the 12V battery of the vehicle. An additional on /off button and blackout switch can be found in the T-ATV1200 cockpit for comfortable use of this lights. This infrared light is used as a running light (low beam) for low speed maneuvers and a high intensity (high beam) headlight mode for high speed maneuvers. This light has automatic voltage sending for use on either 12V or 24V systems. This item cannot be exported outside the US without export license.

Scope of delivery:

- Radiator mounting upgrade incl. IR Lights mounting

- Cable conduit connected to the main Battery

- Wiring and cables

- Infrared light

- Cockpit On/Off button

- Black out switch