Embed Size (px)
Citation preview
8/6/2019 Vector Adhesive Metering Station
http://slidepdf.com/reader/full/vector-adhesive-metering-station 1/2
The Vector™ metering station can be mounted directly to a Vector™ distribution manifold or remotely metered. The
adhesive is delivered with the extreme accuracy of up to ±0.5% at the point of application.
Vector™ - Metering Station
Vector™ Metering Station:
• Metering platform shares a common pump base with other applicators including slot, spray, and bead.
• Pumps can be configured every 50mm to supply a single hose output.
• Vector pumps can be changed-out in less than five minutes, minimizing changeover time.
• Pump/hose outputs range from 0.4cc/rev to 6.8cc/rev.
• Vector™ metering platform is capable of up to four individual metered pump/hose outputs per station.
• AC or servo motor and precision gearbox for accurate speed control of pumps (1 to 45 RPM).
• Standard metering platform is available in widths of 100mm, 200mm, 300mm, 400mm, 500mm, and 600mm.
• Features adjustable or pre-set pressure reliefs of up to 85 BAR.
• The metering station can be located remotely (RMS - Remote Metering Station), or locally mounted (LMS - Local
Metering Station) at the distribution manifold.
Reliability
Accuracy
Versatility
The Vector™ pump has a proven
reliability in providing continuous
duty over a long life cycle.
AC or precision servo motor
and gear box provide accurate
adhesive delivery rates.
The meter adapter can be easily
removed and can be replaced by
a slot or spray adapter.
Vector™ Platform shown with optional servo motor.
Vector™ Quick-Change Metering Pumps
1 2 3
The Dyna t e c D i f f e r e n c e . . .
Vector™ Advanced Metering Platform
Reliability, accuracy, and versatility are the foundations of the
Vector™ Modular Metering Platform. By assuring the metering
accuracy of up to ±0.5%, savings across the board will be
significant. Common parts across the different platforms of
metering, spray, and slot die reduce the number of spare parts
and simplify maintenance procedures.
8/6/2019 Vector Adhesive Metering Station
http://slidepdf.com/reader/full/vector-adhesive-metering-station 2/2
ASIAITW Dynatec Hong KongUnit A-B, 11/Fl., LeahanderCentre 28Wang Wo Tsai StreetTsuen Wan NT Hong Kong
AMERICASITW Dynatec31 Volunteer DriveHendersonville, TN 37075Telephone 615•824•3634+1.800.860.6150Fax [email protected]
JAPANITW Dynatec K.K.Tsukimura Building 5th Floor26-11, Nishikamata 7-chomeOta-ku, Tokyo 144-0051, JapanTelephone +81.3.5703.5501Fax [email protected]
EUROPE, AFRICA MIDDLE EASTITW Dynatec GmbHIndustriestrasse 28D-40822 Mettmann, GeTelephone +49.210.491Fax [email protected]
Visit us at www.itwdynatec.
© 12/2008 ITW Dynatec
TW Dynatec reserves the right to discontinue or change specifications, esigns, materials and equipment without notice or obligation.
Vector™ - Metering Station
Vector™ Platform shown with optional servo motor.
METERED
OUTLETS
OPTIONAL
ADHESIVE RETURN
ADHESIVE SUPPLY
M8 - 1.25
3PLCS
EACH SIDE
PRESSURE
BLEED VALVE
DIM A = 463 + (NUMBER OF PUMPS X 25)
DIM B = 83 + (NUMBER OF PUMPS X 25)
System Specifications:
Operating Temperature 10 to 218°C (50 to 425°F)
Adhesive Add-on Rates 0.4 to 150cc/min/pump
Electrical Service Standard 240 VAC 1 Phase 50/60 Hz
Working Viscosity 500 - 30,000 cps
Temperature Zones 1 Adhesive, 1 Air Heater
Available Pump Sizes:
0.4 cc/rev 0.9 cc/rev
0.5 cc/rev 1.0 cc/rev
0.6 cc/rev 1.7 cc/rev
0.7 cc/rev 3.34 cc/rev
0.8 cc/rev
Available Head Sizes:
100mm 4 Pump
200mm 8 Pump
300mm 12 Pump
400mm 16 Pump
500mm 20 Pump
600mm 24 Pump
