Embed Size (px)
Citation preview
Applied Test Systems | P: +1-724-283-1212 | Email: [email protected] | www.atspa.com
VDO TouchVacuum Desgassing Oven
Touch-screen system with programmable featuresto remove the air bubbles from aged for
asphalt binder and other materials
Applied Test Systems 2 www.atspa.com
VDO Touch
NEW removable lid Vacuum Verification Port
Adjust for atmospheric
pressure
VDO lid rest
7 Inch Touch Screen display
Power indicator light
Applied Test Systems 3 www.atspa.com
VDO Touch
CE compliant power switch
End of cycle alarm
USB ports for software upgrades
Applied Test Systems 4 www.atspa.com
The VDO Touch offers a built-in touch screen. The 7 inch industrial strength touch-screen display is ideal for the newly designed software. Programmable test parameters allow the user to define a cycle for R&D or in the event that AASHTO R 28, ASTM D-6521, and EN 14769 test standards change.
Programmable Test Parameters
Applied Test Systems 5 www.atspa.com
Sample Capacity
Now test up to 8 four ounce samples or 4 eight ounce Samples
Applied Test Systems 6 www.atspa.com
Language Options
Because great roads are important everywhere in the world, the VDO Touch software comes pre-loaded with English, Spanish, Chinese, French, Italian, German, Russian, and Arabic.
Applied Test Systems 7 www.atspa.com
Remote Communication
Ethernet Connection is built into every VDO Touch and allows users to connect the VDO Touch to the internet or network. Once connected, users have the ability to connect to the VDO Touch with a smart device or PC.
Software Updates: The USB port on the back of the VDO touch also enable quick and easy software updates and upgrades.
Register your VDO Touch at www.atspa.com/register/ to be automatically notified of any future software updates and choose your preferred method of delivery for all future updates.
New product registration is available at Applied Test Systems. Go to http://www.atspa.
com/register/ to register your VDO Touch, PAV3, BBR3 or RTFO-Touch to be notified of any new software updates when they become available.
Applied Test Systems 8 www.atspa.com
Specifications
Specifications: To degass pressure aged materials according to AASHTO R28, ASTM D6521, and EN 14769
Unit design: - Self contained automatic vacuum system - Illuminated power light - Programmable touch screen controller: - Temperature: Room temperature - 200°C - Soak Time: up to 4,320 minutes - Degass Time: up to 4,320 minutes
Unit Dimensions: - 24 inches Wide x 16 inches Deep x 12 inches High
Operating Pressure: - Adjustable from 15 kPa to atmosphere
Pressure Safety release: - Solenoid valve
Inlet: - Internal air pump
Construction: - Stainless Steel
Sample Capacity: - Up to (8) four ounce samples or - Up to (4) eight ounce samples
Alarm: - Audio and visual alarm
Temperature Accuracy: - ± 5°C at 170°C
Vacuum Gage: - Indicated in both kPa and in. hg.
Power Requirements: - 230 VAC / 50-60 Hz or 115 VAC / 60Hz
Accessories: - VDO Verification Kit - Vacuum Gage (NIST traceable Optional) - Calibration Block - Vessel Cap - Thermometer (NIST traceable optional)
Specifications subject to change without notice
Applied Test Systems 9 www.atspa.com
Copyright © 2015 Applied Test Systems VDO Touch Product Bulletin # VDOT-10-15
For More Information Regarding the VDO Touch and Other Superpave Products, Contact Applied Test Systems!
+1-724-283-1212
[email protected] or [email protected]
www.atspa.com
154 East Brook LaneButler, PA 16002USA
