Upload
arvind-kakade
View
174
Download
3
Embed Size (px)
Citation preview
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 1
INTRODUCTION ABOUT M/s VINAYAKA CONTROLS AND INSTRUMENTATION.
We are pleased to introduce ourselves as one of the leading power, control and automation panel manufacturing / service establishment based in Peenya, Bangalore and engaged in the business of Design, Engineering, Manufacturing, Erection and Commissioning of all types of electrical panels, SS Panels and service provider etc since 2006 in VIJAYALAKSHMI POWER CONTROLS AND AUTOMATION & changed to VINAYAKA CONTROLS AND INSTRUMENTAITON since 2010. CIRTIFICATIONS:-
� OBTAINING CIRTIFICATES FOR ISO 9000 – 2001 from TUV to maintain the quality
of the products within 2 Months.
� OBTAINING CIRTIFICATES FROM CPRI for LT panels within 3 Months.
SYSTEM INTEGATORS OF:-
� for the PLC / DCS, Drives and Instrumentation Products.
Further we are govt. class – I electrical contractor license holder & we can undertake turn key Industrial and commercial project electrification works, UG cabling works, Transmission lines and substation works etc. We also providing the lisoning work with EB supplier, Electrical inspectorate and other govt. departments connected with Electrical Supply. We are professionally managed industry promoted by well experienced technocrats and are well equipped with adequate infrastructure to design and manufacturer of all types of panels required
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 2
for plant electrification, which makes us very competitive in this field compared to others in terms of quality, delivery and prices.
INDICATIVE LIST OF Activity that WE Undertake:-
01. Electrical & Building Control Panels.
02. Motor Control Center (MCC) , Power Control Center (PCC) and Power Distribution
Board (PDB)
03. Control Logic panels without PLC.
04. DCS / PLC / SCADA Panels & Control desks with MIMIC or without MIMIC.
05. Automation Panels for Machines, Process Industries & OEM’s.
06. Protective and Relay Panels.
07. Automatic P.F. Correction / Auto Load sharing Panels / DG Synchronization Panels.
08. A.C / D.C Drives for Energy saving purpose / Process Sync Panels etc
09. DC Rectifier Panels.
10. P.I.D. Control Panels.
11. Stainless Steel Control Panels for various safety zones.
12. Generator Control / Turbine Sync Panel up to 30MW.
13. Engine Test Bed Control Panel.
14. Automation and Instrumentation test kits for collages.
15. Bus Duct up to 5000A, COPPER / ALUMINIUM.
16. HT / LT SUPPLY AND INSTALATION WORK.
17. Turn Key Electrification job’s
� VARIOUS TYPE OF PANELS AND WORKS WE ARE HANDLING IN VINAYAKA CONTROLS AND INSTRUMENTATION
1.POWER DISTRIBUTION cum AUTOMATIC POWER FACTOR CONTROL PANELS
1. After the transformer, POWER DISTRIBUTION BOARD cum FULLY AUTOMATIC
POWER FACTOR PANEL will be installed.
2. It has got ELECTRICITY INPUTS from the Government and DG input (Based on the
requirement of customers can be designed).
3. Panel is having protection from Earth leakage / under voltage / Over voltage / Single
Phasing protection for EB Supply side input.
4. Panel is having Metering for DG –1 /2 supply side input.
5. It has got Output change over switches based on the requirements of the Customers
6. We are using heavy duty SCHNEIDER CAPACITOR AND ACCESSORIES which will
ensure UNITY POWER FACTOR all the time.
7. APFC Panel is having cylindrical type APP Capacitor Heavy duty type divided into equal
16 Stages based on KVAr requirements of the customer.
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 3
8. We can use 7% detuned type reactors across the capacitor based on the Harmonic level
control of the system.
9. The price for the panel will vary according the size of the Mill.
10. Picture shown is just nominal picture of the Panel. But will vary based on the actual
requirements of the customers.
POWER DISTRIBUTION cum AUTOMATIC POWER FACTOR CONTROL PANELS.
2. PLC CONTROLLED / SEMI AUTOMATIC / MANUAL WITH MIMIC for VARIOUS
APPLICATIONS. FOR RICE MILLING SECTION FROM 2- 32TPH
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 4
SILKY AUTOMATION FOR FURNACE CONTROL
FOR STONE CRUSHER APPLICATION FOR PAPER MILLS SYNCH RONIZATION OF WITH DRIVES ROLLERS WITH DRIVES
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 5
PADDY CLEANING / PARBOILING / DRIER
ABB MAKE PLC, DISPLAY / DRIVES / INSTRUMENTATION
BUS DUCTS
WATER TREATMENT PLANT / METERING BOARD AND APARTMENT PANEL
Series 40..50
CS31 on AC500-eCo COM1
Modbus on AC500-eCo COM2 (option)
HMIModbus
slave
Series 90
Modbus master
S500 I/O
CS31-interface + I/O
Series 90
AC500-eCo, your PLC from ABBAC500-eCo Integration 3
CS31 master
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 6
ENERGY MANAGEMENT SYSTEM WITH APFC / DRIVES
WORKING PHILOSOPHY OF OUR PANELS IN PROCESS CONTROLS � The panel will be installed near the process where the system needs to be controlled.
� Panel can be operated in 3 Modes.
� PUSH BUTTONS ON THE MIMIC DIAGRAM IN MANUAL LOCAL MODE.
� ON / OFF SELECTOR SWITCH NEAR BY MOTOR IN MANUAL REMOTE MODE.
� ON / OFF CONTROLED BY PLC IN FULLY AUTOMATIC MODE.
� User friendly, Trouble free, self diagnostic facility with Energy savings.
� This panel will work on the logics build in the PLC & operate sequential manner ON/OFF
control of all motors based on the level and trip conditions.
� We have provided huge MIMIC in front of the panel which will indicate the entire machine
status of all the motors like ON/OFF/TRIP with buzzer for high level and trip different tone.
� Panel is provided with Touch panel for self diagnostic of the Mill if any problem occurs.
Operator can look and correct the problems based on the instructions given in this touch
panel without any trouble.
� Panel is provided with AUTO / MANUAL Selection options.
� In AUTO entire mill will be under control of PLC.
� PLC / DRIVES / SCADA required for the project is of ABB make as we are the system
Integrator of ABB.
� In MANUAL we have provided two options LOCAL (From MIMIC Buttons in front of the
Panel and REMOTE from switches provided nearby for all motors or PV or SV
independently.
� We can controls the temperature / time with PLC in Parboiling and Drier in case of total
automation required to be done with AUTOMATIC STEAM REGULATING VALVE AND
PNEUMATIC ON / OFF CONROLS OF STEAM.
The Main Advantage of the PLC Based Mill section panel is, • I t will start all the motors sequentially one by one which will avoid Maximum Demand
Indicator Shoot.
• If any machine or elevator is tripped in between, the back side machine will switched off
automatically saves lot of energy. Further give the alarm audio visible (in touch panel) to the
operator to check the problem without stopping the mill
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 7
• If any High level is occurred while running the PLC will close the input feeding by closing the
required gate. Further give the alarm audio visible (in touch panel) to the operator to check
the problem without stopping the mill
• One person is required to drive the entire mill with our panel.
• Our PLC panel will save the energy, manpower, less breakdown, less maintenance,
preventive maintenance chart, Power monitoring through PLC, Flow can be monitoring.
Power calculation can be given per bag basis by taking the details from flow meter and
Energy meter.
• We can provide SMS facility for any breakdown / mill status / custom built info to the
customer trough PLC.
• We can give the SCADA (Supervisory Control and Data Acquisition computer system) to
control and monitor the entire mill by the owner of the company via PLC.
• We can provide internet facility to access and control the mill when owner.
• Picture shown is just nominal picture of the Panel. But will vary based on the actual
requirements of the customers.
Constructional Specification of the Control Panel / PLC Panels / Drive Panels etc
� Type – Double Hinged Single Front Door & Double Hinged Single Back Door Mounting
Floor Mounted Sheet Type – CRCA Sheet Steel.
� Thickness: Load Bearing – 2.0 MM, Non-Load Bearing – 1.6 MM, Gland Plate – 3.0MM
(UD)
� Power Bus bar Specification - Type: A – Grade Aluminium, • Conductivity – 0.8A Per Sq.
MM, Insulation – Colour coded PVC Sleeves of 1.1kV Grade,
� Earth Bus bar Specification - Type – A – Grade Aluminium, Size – 50x6 MM, Control
Cables – Cu flexible cables of 1.5-2.5 Sq MM.
� Paint Specification - Type – Powder Coated, Code – RAL-7035, Cable Entry Detail – To
Be Provided at the time of design.
� Name Plate – Anodized Al.
� Eye Bolts – To Be Provided
� Panel Auto Illumination System – To Be Provided
� Heater & Thermostats – To Be Provided
TERMS AND CONDITIONS OF OUR COMPANY: PORT OF LOADING : BANGALORE, INDIA. PAYMENTS TERMS : Ex works Prices 40% advance 60% against Performa Invoice before dispatch. TAXES : 2% against “C” Form OR full taxes TIME OF SHIPMENT : WITHIN 4-6 WEEKS OR 45 DAYS FROM DATE OF PO and ADVANCE
VVVVIIIINANANANAYYYYAKAKAKAKAAAA CCCCONTROLS ONTROLS ONTROLS ONTROLS AAAAND ND ND ND IIIINSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATIONNSTRUMENTATION
# 1, BALAJINAGAR, 10TH MAIN, THIGALARAPALYA MAIN ROAD, PEENYA 2ND
STAGE, BENGALURU – 560 058, KARNATAKA, INDIA
PHONE NO. +919945210644 / +917204005001
Web site: http://www.indiamart.com/vci/
Email – [email protected] / [email protected]
Page 8
INSURANCE : EXTRA AT ACTUAL TO BE COVERED BY CUSTOMER WOODEN PACKING : EXTRA AT ACUTALS TO BE COVERED BY CUSTOMER PARTIAL OF SHIPMENT: NOT ALLOWED TRANSPORTER: ANY TRANSPORTER FROM INDIA. TRANSPORTATION CHARGES TO BE BORNE BY CUSTOMER. VALIDITY : OFFER WILL BE VALID FOR THIRTY DAYS FROM THE DATE HEREOF AND
THEREAFTER AND SUBJECT TO OUR WRITTEN CONFIRMATION IS REQUIRED
GUARANTEE :DEFECTIVE ITEMS, IF ANY AS A CONSEQUENCE OF FAULTY MATERIAL /
WORKMANSHIP WILL BE REPAIRED / REPLACE FREE OF COST WITHIN THE GUARANTEE PERIOD OF EIGHTEEN MONTHS FROM THE DATE OF COMMISSIONING OR TWENTY FOUR MONTHS FROM THE DATE OF DISPATCH WHICHEVER IS EARLIER. IF NEED ARISES THE ITEM TO BE DELIVERED AND COLLECTED FROM OUR WORKS AT YOUR COST. ALL ORDERS PLACED ON US OR ANY CONTRACT ENTERED INTO CANNOT BE CANCELLED WITHOUT PRIOR CONSENT IN WRITING. ALL DISPUTES ARISING OUT OF SALES OR ON WHATEVER ACCOUNT WILL BE SUBJECTED SETTLEMENT WITH IN BANGALORE JURISDICTION
BANK INFORMATIONS ARE
• NAME : VINAYAKA CONTROLS AND INSTRUMENTATION
• BANK : STATE BANK OF INDIA.
• BRANCH : HESARGHATTA ROAD. BANGALORE – 560090
• ACCOUNT NO : 31036443667
• IFS CODE : SBIN0010499
For VINAYAKA CONTROLS AND INSTRUMENTATION.
Arvind T Kakade
Managing Partner
+919916404822 / +917204005001