VCCI Test Report - Asusdlcdnet.asus.com/pub/ASUS/.../EMC_X99-DELUXE_II_JP... · VCCI Test Report Product Name ：Motherboard Model No. ：X99-DELUXE II ... The test report shall not

Report No：1630108R-ITJPP01V00

Page: 1 of 54

VCCI Test Report

Product Name ： Motherboard

Model No. ： X99-DELUXE II

Applicant ： ASUSTeK COMPUTER INC.

Address ： 4F, No. 150, Li-Te Rd., Peitou, Taipei, Taiwan

Date of Receipt ： 2016/03/02

Issued Date ： 2016/03/16

Report No. ： 1630108R-ITJPP01V00

Report Version ： V1.0

The test results relate only to the samples tested.

The test results shown in the test report are traceable to the national/international standard through the

calibration of the equipment and evaluated measurement uncertainty herein.

This report must not be used to claim product endorsement by TAF or any agency of the government.

The test report shall not be reproduced without the written approval of QuieTek Corporation.


Page: 2 of 54

Test Report Issued Date : 2016/03/16 Report No. : 1630108R-ITJPP01V00

Product Name : Motherboard

Applicant : ASUSTeK COMPUTER INC.

Address : 4F, No. 150, Li-Te Rd., Peitou, Taipei, Taiwan

Manufacturer : 1. INFO-TEK ELECTRONICS ( SUZHOU ) CO.,LTD.

2. Dongguan G-pro computer co.ltd

3. NBM Production(DongGuan)Co.,Ltd.

4. Amertek Computer(Shenzhen) Co.,LTD.

5. Boatek (Ji'an) Electronic Co.,Ltd.

6. Global Brands Manufacture (Dongguan) Ltd

7. PEGATRON CORPORATION Taoyuan Mfg.

8. PEGATRON Corporation Guishan Plant

Model No. : X99-DELUXE II

EUT Rated Voltage : Power By PC

EUT Test Voltage : AC 100 V / 50 Hz

Trade Name : ASUS

Applicable Standard : VCCI: 2015-04, Class B

Test Result : Complied

Performed Location : Quietek Corporation (Linkou Laboratory)

No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451,

Taiwan, R.O.C.

TEL:+866-2-8601-3788 / FAX:+886-2-8601-3789

Documented By :

( Senior Adm. Specialist / Jinn Chen )

Reviewed By :

( Assistant Engineer / Nordy Deng )

Approved By :

( Director / Vincent Lin )


Page: 3 of 54

Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scopes:

Taiwan R.O.C. : BSMI, NCC, TAF

Norway : DNV

USA : FCC

Japan : VCCI

The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/chinese/about/certificates.aspx?bval=5 The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below:

HsinChu Testing Laboratory :

No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected]

LinKou Testing Laboratory :

No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected]

Suzhou (China) Testing Laboratory :

No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China.TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected]


Page: 4 of 54

TABLE OF CONTENTS Description Page 1. General Information .................................................................................................... 5 1.1. EUT Description ................................................................................................... 5 1.2. Mode of Operation ............................................................................................... 6 1.3. Tested System Details ......................................................................................... 7 1.4. Configuration of Tested System ........................................................................... 8 1.5. EUT Exercise Software ........................................................................................ 9 2. Technical Test ........................................................................................................... 10 2.1. Summary of Test Result ..................................................................................... 10 2.2. List of Test Equipment ....................................................................................... 11 2.3. Measurement Uncertainty .................................................................................. 12 2.4. Test Environment ............................................................................................... 13 3. Conducted Emission ................................................................................................. 14 3.1. Test Specification ............................................................................................... 14 3.2. Test Setup .......................................................................................................... 14 3.3. Limit ................................................................................................................... 14 3.4. Test Procedure .................................................................................................. 15 3.5. Deviation from Test Standard ............................................................................. 15 3.6. Test Result ......................................................................................................... 16 3.7. Test Photograph ................................................................................................ 22 4. Conducted Emissions (Telecommunication Ports) .................................................... 23 4.1. Test Specification ............................................................................................... 23 4.2. Test Setup .......................................................................................................... 23 4.3. Limit ................................................................................................................... 23 4.4. Test Procedure .................................................................................................. 24 4.5. Deviation from Test Standard ............................................................................. 24 4.6. Test Result ......................................................................................................... 25 4.7. Test Photograph ................................................................................................ 43 5. Radiated Emission .................................................................................................... 44 5.1. Test Specification ............................................................................................... 44 5.2. Test Setup .......................................................................................................... 44 5.3. Limit ................................................................................................................... 45 5.4. Test Procedure .................................................................................................. 46 5.5. Deviation from Test Standard ............................................................................. 46 5.6. Test Result ......................................................................................................... 47 5.7. Test Photograph ................................................................................................ 51 6. Attachment ................................................................................................................ 53 　 EUT Photograph ................................................................................................ 53


Page: 5 of 54

1. General Information

1.1. EUT Description

Product Name Motherboard

Trade Name ASUS

Model No. X99-DELUXE II

Component

CPU Intel (R) i7-5960g, Speed: 3.5GHz

Mother Board ASUS, X99-DELUXE II

HDD WD, WD10EZEX

VGA Card ASUS, GTX950-2GD5

LAN Card On Board

Sound Card On Board

Power Supply AcBel, PCA013

DDR-RAM CORSAIR, CMV4GX4M1A2133C15 (DDR4-2133-4G)*8


Page: 6 of 54

1.2. Mode of Operation QuieTek has verified the construction and function in typical operation. All the test modes were

carried out with the EUT in normal operation, which was shown in this test report and defined as:

Pre-Test Mode

Mode 1:Intel i7-5960X 3GHz , HDMI 3840*2160/30Hz Mode 2:Intel i7-5960X 3GHz , HDMI 1600*1200/60Hz Mode 3:Intel i7-5960X 3GHz , HDMI 1280*1024/60Hz

Final Test Mode

Emission

Mode 1:Intel i7-5960X 3GHz , HDMI 3840*2160/30Hz


Page: 7 of 54

1.3. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including

inserted cards) are:

Product Manufacturer Model No. Serial No. Power Cord

1 Notebook PC DELL E5530 24QPXW1 Non-Shielded, 0.8m

2 Notebook PC Lenovo ThinkPad Edge E440 PF05HX2Z Non-Shielded, 0.8m

3 Wireless Router TP-LINK TL-WR1043ND 13463900123 Non-Shielded, 1.8m

4 LED Monitor DELL UP2414Q CN-0W09C2-74445-43D-033L Non-Shielded, 1.8m

5 Speaker PHILIPS SBP1100 HS1A0825057486 N/A

6 Speaker PHILIPS SBP1100 HS1A0825057523 N/A

7 Cambridge

SoundWorks

Creative S80130 AM01303200000941 Non-Shielded, 1.9m

8 IPod nano Apple A1236 7L8221YEY0P N/A

9 Microphone &

Earphone

Ergotech E201 N/A N/A

10 Keyboard Microsoft 1576 0065809413357 N/A

11 USB Mouse Microsoft 1113 N/A N/A

12 USB 3.0(2T) WD WDBACW0020HBK WCAZAL208151 Non-Shielded, 1.5m






18 USB 3.0(2T) WD WDBACW0020HBK WCAZAK408804 Non-Shielded, 1.5m





23 USB 3.1 type C

Dongle

Apple A1621 N/A N/A


Page: 8 of 54

1.4. Configuration of Tested System

Connection Diagram

Signal Cable Type Signal cable Description

A LAN Cable Non-shielded, 6.0m, two PCS.

B HDMI Cable Shielded, 1.8m

C Speaker Cable Non-shielded, 1.2m, two PCS.

D Fiber Cable Non-shielded, 1.5m

E Audio Cable Non-shielded, 1.6m

F Microphone & Earphone Cable Non-shielded, 2m

G USB Keyboard Cable Non-shielded, 1.8m

H USB Mouse Cable Non-shielded, 1.8m

I USB 3.0 Cable Shielded, 1.0m, eleven PCS.

J mini Display Cable Shielded, 0.5m

K USB 3.1 type C Cable Shielded, 0.1m

L Antenna Cable Non-shielded, 0.8m

M USB 3.1 type C Cable Shielded, 0.05m


Page: 9 of 54

1.5. EUT Exercise Software

1 Setup the EUT and simulators as shown on 1.4.

2 Turn on the power of all equipment.

3 Personal Computer reads data from disk.

4 Personal Computer sends “H” pattern to printer, the printer will print “H” pattern on paper.

5 EUT Connect another simulation PC through LAN port and carry out Read/Write work each other.

6 Repeat the above procedure (3) to (5).


Page: 10 of 54

2. Technical Test

2.1. Summary of Test Result

No deviations from the test standards

Deviations from the test standards as below description:

Emission

Performed Item Normative References Test

Performed Deviation

Conducted Emission VCCI: 2015-04, Class B Yes No

Impedance Stabilization Network VCCI: 2015-04, Class B Yes No

Radiated Emission VCCI: 2015-04, Class B Yes No


Page: 11 of 54

2.2. List of Test Equipment Conducted Emission / SR2 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver R&S ESCI 100647 2016/01/18 LISN R&S ESH3-Z5 836679/020 2015/03/18 LISN R&S ENV216 100086 2015/03/18 Coaxial Cable QTK(Arnist) RG 400 LC017-RG 2015/06/24 Impedance Stabilization Network / SR2 Instrument Manufacturer Type No. Serial No Cal. Date Capacitive Voltage Probe Schaffner CVP2200A 18331 2015/10/30 EMI Test Receiver R&S ESCI 100647 2016/01/18 LISN R&S ESH3-Z5 836679/020 2015/03/18 LISN R&S ENV216 100086 2015/03/18 RF Current Probe FCC F-65 10KHz~1GHz 198 2015/11/03 Coaxial Cable QTK(Arnist) RG 400 LC017-RG 2015/06/24 BALANCED TELECOM ISN FCC FCC-TLISN-T2-02 20316 2015/08/03 Impedance Stabilization Network

Teseq ISN T800 30892 2015/11/25

Radiated Emission / Site5 Instrument Manufacturer Type No. Serial No Cal. Date Bilog Antenna Schaffner Chase CBL6112B 2919 2015/06/12 EMI Test Receiver R&S ESCS 30 100149 2015/06/09 Coaxial Cable QTK(Arnist) RG 214 LC005-RG 2015/06/19 Coaxial signal switch Arnist MP59B 6100034519 2015/06/19 Site5 NSA QTK N/A N/A 2015/06/19

Radiated Emission / CB7 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver R&S ESU26 100433 2015/09/03 Horn Antenna SCHWARZBECK 9120D 576 2015/11/25 Pre-Amplifier COM-POWER PAM-118 443019 2015/07/14 CB7 VSWR QTK N/A N/A 2015/06/25

VCCI Test Site: Test Item Test Site VCCI No. Conducted Emission SR1 C-2428 Conducted Emission SR2 C-3837 Conducted Emission SR8 C-3723 Conducted Emission (Telecommunication Port) SR1 T-1473 Conducted Emission (Telecommunication Port) SR2 T-1955 Conducted Emission (Telecommunication Port) SR8 T-1887 Radiated Emission Site 1 R-2231 Radiated Emission Site 2 R-2232 Radiated Emission Site 3 R-2233 Radiated Emission Site 4 R-2592 Radiated Emission Site 5 R-2593 Radiated Emission Site 6 R-2828 Radiated Emission Site 7 R-3748 Radiated Emission CB7 R-3107 Radiated Emission (Above 1GHz) CB7(9x6x6_Chamber) G-35


Page: 12 of 54

2.3. Measurement Uncertainty

Conducted Emission

The measurement uncertainty is evaluated as ± 2.26 dB.

Impedance Stabilization Network


Radiated Emission



Page: 13 of 54

2.4. Test Environment

Performed Item Items Required Actual

Temperature (C) 15-35 21

Conducted Emission Humidity (%RH) 25-75 27

Barometric pressure (mbar) 860-1060 950-1000


Impedance Stabilization Network Humidity (%RH) 25-75 27



Radiated Emission Humidity (%RH) 25-75 27



Page: 14 of 54

3. Conducted Emission

3.1. Test Specification

According to EMC Standard : VCCI

3.2. Test Setup

3.3. Limit

Limits

Frequency (MHz)

QP (dBμV)

AV (dBμV)

0.15 - 0.50 66 - 56 56 – 46

0.50-5.0 56 46

5.0 - 30 60 50

Remarks: In the above table, the tighter limit applies at the band edges.


Page: 15 of 54

3.4. Test Procedure

The EUT and simulators are connected to the main power through a line impedance

stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the

measuring equipment. The peripheral devices are also connected to the main power through

a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination.

(Please refers to the block diagram of the test setup and photographs.)

Both sides of A.C. line are checked for maximum conducted interference. In order to find the

maximum emission, the relative positions of equipment and all of the interface cables must

be changed according to VCCI on conducted measurement.

Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using

a receiver bandwidth of 9kHz.

3.5. Deviation from Test Standard

No deviation.


Page: 16 of 54

3.6. Test Result

Site : SR2 Time : 2016/03/02 - 15:50

Limit : CISPR_B_00M_QP Margin : 10

EUT : Motherboard Probe : ENV_216_L1 - Line1

Power : AC 100V/50Hz Note : Mode 1


Page: 17 of 54

Site : SR2 Time : 2016/03/02 - 15:51




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.201 9.824 33.160 42.984 -21.559 64.543 QUASIPEAK

2 0.267 9.839 30.500 40.339 -22.318 62.657 QUASIPEAK

3 0.334 9.844 27.990 37.834 -22.909 60.743 QUASIPEAK

4 0.533 9.889 27.770 37.659 -18.341 56.000 QUASIPEAK

5 0.931 9.980 28.340 38.320 -17.680 56.000 QUASIPEAK

6 * 18.668 10.639 37.640 48.279 -11.721 60.000 QUASIPEAK

Note:

1. All Reading Levels are Quasi-Peak and average value.

2. " * ", means this data is the worst emission level.

3. Measurement Level = Reading Level + Correct Factor


Page: 18 of 54

Site : SR2 Time : 2016/03/02 - 15:51

Limit : CISPR_B_00M_AV Margin : 0



Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.201 9.824 25.170 34.994 -19.549 54.543 AVERAGE

2 0.267 9.839 28.070 37.909 -14.748 52.657 AVERAGE

3 0.334 9.844 25.970 35.814 -14.929 50.743 AVERAGE

4 0.533 9.889 26.920 36.809 -9.191 46.000 AVERAGE

5 0.931 9.980 27.810 37.790 -8.210 46.000 AVERAGE

6 * 18.668 10.639 31.340 41.979 -8.021 50.000 AVERAGE

Note:





Page: 19 of 54

Site : SR2 Time : 2016/03/02 - 15:51


EUT : Motherboard Probe : ENV_216_N - Line2



Page: 20 of 54

Site : SR2 Time : 2016/03/02 - 15:53




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.197 9.793 30.910 40.703 -23.954 64.657 QUASIPEAK

2 0.263 9.808 29.100 38.908 -23.863 62.771 QUASIPEAK

3 0.330 9.813 26.220 36.033 -24.824 60.857 QUASIPEAK

4 0.931 9.950 25.010 34.960 -21.040 56.000 QUASIPEAK

5 2.189 10.255 23.730 33.985 -22.015 56.000 QUASIPEAK

6 * 18.728 10.741 32.850 43.591 -16.409 60.000 QUASIPEAK

Note:





Page: 21 of 54

Site : SR2 Time : 2016/03/02 - 15:53

Limit : CISPR_B_00M_AV Margin : 0



Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.197 9.793 24.430 34.223 -20.434 54.657 AVERAGE

2 0.263 9.808 25.270 35.078 -17.693 52.771 AVERAGE

3 0.330 9.813 21.360 31.173 -19.684 50.857 AVERAGE

4 * 0.931 9.950 24.250 34.200 -11.800 46.000 AVERAGE

5 2.189 10.255 20.440 30.695 -15.305 46.000 AVERAGE

6 18.728 10.741 27.210 37.951 -12.049 50.000 AVERAGE

Note:





Page: 22 of 54

3.7. Test Photograph Test Mode : Mode 1:Intel i7-5960X 3GHz , HDMI 3840*2160/30Hz

Description : Front View of Conducted Test

Test Mode : Mode 1:Intel i7-5960X 3GHz , HDMI 3840*2160/30Hz

Description : Back View of Conducted Test


Page: 23 of 54

4. Conducted Emissions (Telecommunication Ports)



4.2. Test Setup

4.3. Limit

Limits

Frequency (MHz)

QP (dBμV)

AV (dBμV)

0.15 - 0.50 84 – 74 74 – 64

0.50 - 30 74 64

Remarks:

The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz~0.50

MHz.


Page: 24 of 54

4.4. Test Procedure

Telecommunication Port:

The mains voltage shall be supplied to the EUT via the LISN when the measurement of

telecommunication port is performed. The common mode disturbances at the

telecommunication port shall be connected to the ISN, which is 150 ohm impedance.

Both alternative cables are tested related to the LCL requested. The measurement range is

from 150kHz to 30MHz. The bandwidth of measurement is set to 9kHz.

The 75dB LCL ISN is used for cat. 6 cable, the 65dB LCL ISN is used for cat. 5 cable, 55dB

LCL ISN is used for cat. 3.


No deviation.


Page: 25 of 54

4.6. Test Result

Site : SR2 Time : 2016/03/02 - 16:04

Limit : ISN_Voltage_B_00M_QP Margin : 10

EUT : Motherboard Probe : TESEQ_T8 - Line1

Power : AC 100V/50Hz Note : Mode 1, LAN 1 ISN 10M


Page: 26 of 54

Site : SR2 Time : 2016/03/02 - 16:05




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 * 0.400 10.071 52.550 62.621 -14.236 76.857 QUASIPEAK

2 0.607 10.023 40.410 50.433 -23.567 74.000 QUASIPEAK

3 0.802 10.030 47.520 57.550 -16.450 74.000 QUASIPEAK

4 1.205 10.082 42.620 52.702 -21.298 74.000 QUASIPEAK

5 2.502 10.241 33.770 44.011 -29.989 74.000 QUASIPEAK

6 7.502 10.257 49.290 59.547 -14.453 74.000 QUASIPEAK

Note:





Page: 27 of 54

Site : SR2 Time : 2016/03/02 - 16:05

Limit : ISN_Voltage_B_00M_AV Margin : 0



Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 * 0.400 10.071 52.540 62.611 -4.246 66.857 AVERAGE

2 0.607 10.023 40.410 50.433 -13.567 64.000 AVERAGE

3 0.802 10.030 47.510 57.540 -6.460 64.000 AVERAGE

4 1.205 10.082 40.180 50.262 -13.738 64.000 AVERAGE

5 2.502 10.241 24.540 34.781 -29.219 64.000 AVERAGE

6 7.502 10.257 37.410 47.667 -16.333 64.000 AVERAGE

Note:





Page: 28 of 54

Site : SR2 Time : 2016/03/02 - 16:07





Page: 29 of 54

Site : SR2 Time : 2016/03/02 - 16:08




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.401 10.071 52.550 62.621 -14.208 76.829 QUASIPEAK

2 0.603 10.023 40.530 50.553 -23.447 74.000 QUASIPEAK

3 0.802 10.030 47.470 57.500 -16.500 74.000 QUASIPEAK

4 1.205 10.082 42.780 52.862 -21.138 74.000 QUASIPEAK

5 18.244 10.497 49.210 59.707 -14.293 74.000 QUASIPEAK

6 * 23.130 10.674 50.500 61.174 -12.826 74.000 QUASIPEAK

Note:





Page: 30 of 54

Site : SR2 Time : 2016/03/02 - 16:08




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 * 0.401 10.071 52.540 62.611 -4.218 66.829 AVERAGE

2 0.603 10.023 40.490 50.513 -13.487 64.000 AVERAGE

3 0.802 10.030 47.460 57.490 -6.510 64.000 AVERAGE

4 1.205 10.082 40.070 50.152 -13.848 64.000 AVERAGE

5 18.244 10.497 46.800 57.297 -6.703 64.000 AVERAGE

6 23.130 10.674 48.090 58.764 -5.236 64.000 AVERAGE

Note:





Page: 31 of 54

Site : SR2 Time : 2016/03/02 - 16:09



Power : AC 100V/50Hz Note : Mode 1, LAN 1 ISN 1G


Page: 32 of 54

Site : SR2 Time : 2016/03/02 - 16:10




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 * 0.401 10.071 52.550 62.621 -14.208 76.829 QUASIPEAK

2 0.607 10.023 40.450 50.473 -23.527 74.000 QUASIPEAK

3 0.802 10.030 47.620 57.650 -16.350 74.000 QUASIPEAK

4 1.205 10.082 42.700 52.782 -21.218 74.000 QUASIPEAK

5 22.369 10.645 37.340 47.985 -26.015 74.000 QUASIPEAK

6 29.212 10.898 37.840 48.738 -25.262 74.000 QUASIPEAK

Note:





Page: 33 of 54

Site : SR2 Time : 2016/03/02 - 16:10




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 * 0.401 10.071 52.540 62.611 -4.218 66.829 AVERAGE

2 0.607 10.023 40.210 50.233 -13.767 64.000 AVERAGE

3 0.802 10.030 47.610 57.640 -6.360 64.000 AVERAGE

4 1.205 10.082 39.890 49.972 -14.028 64.000 AVERAGE

5 22.369 10.645 32.210 42.855 -21.145 64.000 AVERAGE

6 29.212 10.898 32.630 43.528 -20.472 64.000 AVERAGE

Note:





Page: 34 of 54

Site : SR2 Time : 2016/03/02 - 16:18





Page: 35 of 54

Site : SR2 Time : 2016/03/02 - 16:20




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.400 10.071 44.190 54.261 -22.596 76.857 QUASIPEAK

2 0.603 10.023 42.280 52.303 -21.697 74.000 QUASIPEAK

3 0.802 10.030 39.850 49.880 -24.120 74.000 QUASIPEAK

4 1.209 10.083 44.540 54.623 -19.377 74.000 QUASIPEAK

5 * 7.501 10.257 50.040 60.298 -13.702 74.000 QUASIPEAK

6 13.752 10.385 40.550 50.935 -23.065 74.000 QUASIPEAK

Note:





Page: 36 of 54

Site : SR2 Time : 2016/03/02 - 16:20




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.400 10.071 44.180 54.251 -12.606 66.857 AVERAGE

2 0.603 10.023 42.270 52.293 -11.707 64.000 AVERAGE

3 0.802 10.030 39.260 49.290 -14.710 64.000 AVERAGE

4 * 1.209 10.083 44.530 54.613 -9.387 64.000 AVERAGE

5 7.501 10.257 37.710 47.968 -16.032 64.000 AVERAGE

6 13.752 10.385 29.330 39.715 -24.285 64.000 AVERAGE

Note:





Page: 37 of 54

Site : SR2 Time : 2016/03/02 - 16:21





Page: 38 of 54

Site : SR2 Time : 2016/03/02 - 16:22




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.400 10.071 44.190 54.261 -22.596 76.857 QUASIPEAK

2 0.607 10.023 42.150 52.173 -21.827 74.000 QUASIPEAK

3 0.802 10.030 39.830 49.860 -24.140 74.000 QUASIPEAK

4 1.209 10.083 44.610 54.693 -19.307 74.000 QUASIPEAK

5 18.244 10.497 49.480 59.977 -14.023 74.000 QUASIPEAK

6 * 23.129 10.673 50.670 61.344 -12.656 74.000 QUASIPEAK

Note:





Page: 39 of 54

Site : SR2 Time : 2016/03/02 - 16:22




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.400 10.071 44.180 54.251 -12.606 66.857 AVERAGE

2 0.607 10.023 42.140 52.163 -11.837 64.000 AVERAGE

3 0.802 10.030 39.260 49.290 -14.710 64.000 AVERAGE

4 1.209 10.083 44.600 54.683 -9.317 64.000 AVERAGE

5 18.244 10.497 46.960 57.457 -6.543 64.000 AVERAGE

6 * 23.129 10.673 48.090 58.764 -5.236 64.000 AVERAGE

Note:





Page: 40 of 54

Site : SR2 Time : 2016/03/02 - 16:23





Page: 41 of 54

Site : SR2 Time : 2016/03/02 - 16:24




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.400 10.071 44.190 54.261 -22.596 76.857 QUASIPEAK

2 0.603 10.023 42.400 52.423 -21.577 74.000 QUASIPEAK

3 0.802 10.030 39.960 49.990 -24.010 74.000 QUASIPEAK

4 * 1.209 10.083 44.610 54.693 -19.307 74.000 QUASIPEAK

5 4.634 10.224 28.880 39.104 -34.896 74.000 QUASIPEAK

6 25.380 10.756 37.990 48.746 -25.254 74.000 QUASIPEAK

Note:





Page: 42 of 54

Site : SR2 Time : 2016/03/02 - 16:24




Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV)

Margin

(dB)

Limit

(dBuV)

Detector Type

1 0.400 10.071 44.180 54.251 -12.606 66.857 AVERAGE

2 0.603 10.023 42.390 52.413 -11.587 64.000 AVERAGE

3 0.802 10.030 39.320 49.350 -14.650 64.000 AVERAGE

4 * 1.209 10.083 44.600 54.683 -9.317 64.000 AVERAGE

5 4.634 10.224 23.580 33.804 -30.196 64.000 AVERAGE

6 25.380 10.756 32.890 43.646 -20.354 64.000 AVERAGE

Note:





Page: 43 of 54


Description : Front View of ISN Test


Description : Back View of ISN Test


Page: 44 of 54

5. Radiated Emission



5.2. Test Setup

Under 1GHz Test Setup:

Above 1GHz Test Setup:


Page: 45 of 54

5.3. Limit

Under 1GHz test shall not exceed the following value:

Limits

Frequency (MHz)

Distance (m) dBμV/m

30 – 230 10 30

230 – 1000 10 37

Remark:

1. The tighter limit shall apply at the edge between two frequency bands.

2. Distance refers to the distance in meters between the measuring instrument antenna and

the closed point of any part of the device or system.

Above 1GHz test shall not exceed the following value:

Limits (dBμV/m)

Frequency

(GHz) Distance (m)

Peak limit

dB(μV/m)

Average limit

dB(μV/m)

1-3 3 70 50

3-6 3 74 54

NOTE: The lower limit applies at the transition frequency


Page: 46 of 54

5.4. Test Procedure

The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The

turn table can rotate 360 degrees to determine the position of the maximum emission level.

The EUT was positioned such that the distance from antenna to the EUT was 10 meters.

The antenna can move up and down between 1 meter and 4 meters to find out the maximum

emission level.

All cable leaving the table-top EUT for a connection outsidethe test site (for example, mains

cable, telephone lines, connections to auxiliary equipment located outside the test area) shall

be fitted with ferrite clamps placed on the floor at the point where the cable reached the floor.

Both horizontal and vertical polarization of the antenna are set on measurement. In order to

find the maximum emission, all of the interface cables must be manipulated according to

VCCI on radiated measurement.

Radiated emissions were invested over the frequency range from 30MHz to1GHz using a

receiver bandwidth of 120kHz. Radiated was performed at an antenna to EUT distance of 10

meters.

Conditional testing procedure:

The highest internal source of an EUT is defined as the highest frequency generated or

used within the EUT or on which the EUT operates or tunes.

If the highest frequency of the internal sources of the EUT is less than 108 MHz, the

measurement shall only be made up to 1 GHz.

If the highest frequency of the internal sources of the EUT is between 108 MHz and 500

MHz, the measurement shall only be made up to 2 GHz.

If the highest frequency of the internal sources of the EUT is between 500 MHz and 1

GHz, the measurement shall only be made up to 5 GHz.

If the highest frequency of the internal sources of the EUT is above 1 GHz, the

measurement shall be made up to 5 times the highest frequency or 6 GHz, whichever is

less.

It is placed with absorb on the ground between EUT and Antenna.


No deviation.


Page: 47 of 54

5.6. Test Result

Site : Site5 Time : 2016/03/02 - 20:04


EUT : Motherboard Probe : Site5_CBL6112_10M_1506 - HORIZONTAL


Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV/m)

Margin

(dB)

Limit

(dBuV/m)

Detector Type

1 108.100 14.157 9.700 23.857 -6.143 30.000 QUASIPEAK

2 123.100 14.551 11.100 25.651 -4.349 30.000 QUASIPEAK

3 216.000 12.412 11.700 24.112 -5.888 30.000 QUASIPEAK

4 297.000 16.966 13.300 30.265 -6.735 37.000 QUASIPEAK

5 333.400 17.964 14.800 32.764 -4.236 37.000 QUASIPEAK

6 500.000 22.561 8.800 31.361 -5.639 37.000 QUASIPEAK

7 * 594.000 24.360 8.500 32.860 -4.140 37.000 QUASIPEAK

8 891.000 28.036 3.000 31.036 -5.964 37.000 QUASIPEAK

Note:

1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or

average measurements as necessary.




Page: 48 of 54

Site : Site5 Time : 2016/03/02 - 20:17


EUT : Motherboard Probe : Site5_CBL6112_10M_1506 - VERTICAL


Frequency

(MHz)

Correct Factor

(dB)

Reading Level

(dBuV)

Measure Level

(dBuV/m)

Margin

(dB)

Limit

(dBuV/m)

Detector Type

1 108.300 14.184 10.300 24.484 -5.516 30.000 QUASIPEAK

2 250.000 15.846 11.000 26.846 -10.154 37.000 QUASIPEAK

3 297.000 16.966 11.500 28.465 -8.535 37.000 QUASIPEAK

4 500.000 22.561 2.800 25.361 -11.639 37.000 QUASIPEAK

5 * 594.000 24.360 8.400 32.760 -4.240 37.000 QUASIPEAK

6 891.000 28.036 2.200 30.236 -6.764 37.000 QUASIPEAK

Note:






Page: 49 of 54

Site: CB7 Time: 2016/03/04 - 22:37

Limit: VCCI_B_(Above_1G) Margin: 0

Probe: CB7_Horn_9120D_1511 Polarity: Horizontal

EUT: Motherboard Power: AC 100V/50Hz

Note: Mode 1

No Flag Mark Frequency

(MHz)

Measure Level

(dBuV/m)

Reading Level

(dBuV)

Over Limit

(dB)

Limit

(dBuV/m)

Factor Type

1 1478.000 54.599 52.886 -15.401 70.000 1.713 PK

2 1478.000 43.813 42.100 -6.187 50.000 1.713 AV

3 2232.000 54.247 49.870 -15.753 70.000 4.377 PK

4 * 2232.000 44.377 40.000 -5.623 50.000 4.377 AV

Note:




3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp).


Page: 50 of 54

Site: CB7 Time: 2016/03/04 - 22:38

Limit: VCCI_B_(Above_1G) Margin: 0

Probe: CB7_Horn_9120D_1511 Polarity: Vertical

EUT: Motherboard Power: AC 100V/50Hz

Note: Mode 1

No Flag Mark Frequency

(MHz)

Measure Level

(dBuV/m)

Reading Level

(dBuV)

Over Limit

(dB)

Limit

(dBuV/m)

Factor Type

1 1475.000 52.508 50.800 -17.492 70.000 1.708 PK

2 * 1475.000 43.108 41.400 -6.892 50.000 1.708 AV

3 1590.000 53.825 51.620 -16.175 70.000 2.205 PK

4 1590.000 33.405 31.200 -16.595 50.000 2.205 AV

Note:




3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp).


Page: 51 of 54


Description : Front View of Radiated Test


Description : Back View of Radiated Test


Page: 52 of 54


Description : Front View of High Frequency Radiated Test


Page: 53 of 54

6. Attachment EUT Photograph

(1) EUT Photo

(2) EUT Photo


Page: 54 of 54

(3) EUT Photo

Documents

VCCI Test Report - Asusdlcdnet.asus.com/pub/ASUS/.../EMC_X99-DELUXE_II_JP... · VCCI Test Report Product Name ：Motherboard Model No. ：X99-DELUXE II ... The test report shall not