Vascular Accessory Portfolio rev. 02/13

Vascular Accessory PortfolioToshiba INFINIX-i FY12 Offering

rev. 02/13

Table of ContentsVascular Monitors

Monitor Carts

Digital Processor Options

Printers

Secondary Control Stands

3D Imaging Options

Table Accessories

Radiation Shields and Lamps

Equipment Booms

rev. 02/13

Vascular Monitors

rev. 02/13

SMD19102TCSTV Monitor, LCD, 19”

19” Grey Scale Flat Panel Display Monitor

• Resolution: 1280 x 1024• High contrast ratio 900:1 and luminance 1000 cd/m²

rev. 02/13

6GF6988-8AH02Base Plate for 19” LCD Desktop Monitor

Base Plate for 19” Gray Scale Flat Panel Display Monitor

rev. 02/13

DFP-LCD.100DFP LCD Monitor KIT (For Color Image Display)

• 21.3 LCD monitor• 1600 x 1200 display matrix• 280 cd/m2 luminance (typical)

rev. 02/13

XIDF-ESD801External Signal Display Kit

Provides display of output image from external system, such as IVUS, ECG, 3-D Angio, PACS or other workstation.

• Operator can select from up to four (4) external video signals for display at tableside via software selection menu on tableside monitors.

• This feature provides only display, not remote/tableside operation of external workstation.

• Includes 21” LCD Flat Panel Display

rev. 02/13

XIDF-RVC801Supplemental Review Console for DFP

Connects to the main control room console toprovide more precise playback and review options.

Specific controls more easily adjust the look and playback speed of reviewed images.

This includes:

Jog/shuttle wheel • Controls the playback speed of dynamic images • Enables frame-by-frame review of dynamic images

Separate adjustment controls for • Edge enhancement • Brightness • Contrast

RUNS forward or reverse or MAPS forward or reverse, conveniently located on either side of the jog/shuttle wheel

Display all the RUNS or all the MAPS

Save a MAP image

Select and display the original run used to create

the currently selected MAP image

rev. 02/13

XIDF-REF801/A1Additional Reference Monitor Output Signal

For Dual Plane system

• Provides an additional reference monitor output for tableside viewing

• Also necessary to purchase additional monitor

rev. 02/13


For Single Plane system

• Provides an additional reference monitor output for tableside viewing

• Also necessary to purchase additional monitor

rev. 02/13


For Biplane system

• Provides an additional reference monitor output for both lateral and AP planes

• Also necessary to purchase additional monitors

rev. 02/13

Monitor Carts

rev. 02/13

XAMC/LCDS/A.100LCD Monitor with Single Style Cart

Includes:

• Compact mobile cart, accommodates one monitor• One 19” black and white monitor• One 30m video cable

rev. 02/13

XAMC/LCDD/A.100LCD Monitor with Dual-Style Cart

Includes:

• Compact mobile cart, accommodates two monitors• One 19” black and white monitor• One 30m video cable

rev. 02/13

Digital Processor Options

rev. 02/13

XIDF-ROT801Rational Technology

Digital Processor option

The system has integrated multiple forms of rotation technology to include high-speed C-arm rotation for 3-D acquisition and 2-D rotational capabilities. High-speed rotation provides acquisition frame rates ideal for high-resolution 3-D reconstructions.

Enables rotational DA/DSA • DA up to 50 degrees per second • DSA up to 40 degrees per second

Required for 3D rotational capability

rev. 02/13

XIDF-STP801DSA Stepping

Digital Processor option enables DSA images displayed in real time

SpecificationsImage size: 1024x1024; 12-bitImage rate (FPS): 15, 10, 6, 3, 2, 1 can be selected at the time of installationStages: 8 (7 steps)Speed: 1.7 sec/step

Stroke:Enables rotational DA/DSA • DA up to 50 degrees per second • DSA up to 40 degrees per second

Maximum sweep: 1350 mm (53.1”) Three sweeps: • Set up exposures at fluoro dose levels (abdomen to feet) • Mask acquisition (feet to abdomen) •DSA exposures (abdomen to feet)

rev. 02/13

XIDF-QCA801QCA/LVA Measurement Software


Quantitative Coronary Analysis can be used to determine which diameter and length of stent to apply:

• Not necessary for point to point measurements, that is standard with DFP

Left Ventricular Analysis (LVA) can be used to measure the contractility of the heart and determine areas of infarction

rev. 02/13

XIDF-QCA802QCA Software Biplane Expansion


Required to enable biplane mode use of LVA

Left Ventricular Analysis (LVA) can be used to measure the contractility of the heart and determine areas of infraction

• XIDF-QCA801 is required to enable this

• Not compatible with XIDF-QCA804

rev. 02/13

XIDF-QCA803QVA Measurement Software


Required to enable biplane mode use of LVA

Quantitative Vessel Analysis (QVA) is similar to QCA but is used for peripheral vessels larger than 6mm in diameter (aorta, iliacs, subclavian, etc.)


• XIDF-QCA801 is required to enable this

rev. 02/13

XIDF-QCA804QCA/QVA Measurement Software


This option enables both QCA and QVA measurement capabilities:


rev. 02/13

Printers

rev. 02/13

HORIZON/SF-CTCodonics Horizon SF Multimedia Dry Imager

The Horizon® SF is an intelligent, desktop dry film imager that produces superior diagnostic-quality medical films as well as color and grayscale paper images fast, conveniently and affordably.

• Dye-diffusion and direct thermal

• Supports DICOM, ISG and PostScript

• Up to 100 films per hour

• Three supply cassettes, 50-100 sheets each

• Media Sizes: 8”x10”, A, A4

• Media: DirectVista® Blue Film, DirectVista Grayscale Paper, Chroma Vista® Color Paper

rev. 02/13

HORIZON/CI-VLCodonics Horizon CI Multimedia Dry Imager

• Dye-diffusion and direct thermal



• Three receive trays, 50-100 sheets each


• Media Sizes: 8”x10”, 14”x17”, A, A4

• Media: DirectVista® Film (blue and clear), DirectVista Grayscale Paper, Chroma Vista® Color Paper

rev. 02/13

HORIZON/GS-VLCodonics Horizon GS Multimedia Dry Imager

• Direct thermal



• Three receive trays, 50 sheets each


• Media Sizes: 8”x10”, 14”x17”, A, A4

• Media: DirectVista® Film (blue and clear), DirectVista Grayscale Paper

rev. 02/13

Secondary Control Stands

rev. 02/13

XGCP-830AASecondary Control Stand

For CAS-830A Single Plane system

Second control unit (satellite console) for Infinix-i Ceiling mounted single plane systems. Joystick control and function buttons virtually duplicates all functions on the HyperHandle tableside control and includes roll around mounting stand.

Console Stand

rev. 02/13


For Dual Plane system

Second control unit (satellite console) for Infinix-i Dual Plane system. Joystick control and function buttons virtually duplicates all functions on the HyperHandle tableside control and includes roll around mounting stand.

Console Stand

rev. 02/13


For CAS-880A and CAS-830B Single Plane System

Second control unit (satellite console) for all Infinix-i single plane floor mount systems. Joystick control and function buttons virtually duplicates all functions on the HyperHandle tableside control and includes roll around mounting stand.

Console Stand

rev. 02/13


For Biplane System

Second control unit (satellite console) for Infinix-i Biplane Systems. Joystick control and function buttons virtually duplicates all functions on the HyperHandle tableside control and includes roll around mounting stand.

rev. 02/13

Insert Chapter3D Imaging Options

rev. 02/13

XIDF-3DP802/A1Volume Navigation 3D Roadmap Software

• Infinix-i software option to provide 3-D Angio image super-imposed over live fluoroscopy

• Superimposed 3-D image is linked to all system mechanical movements to maintain accurate alignment of 3-D image with fluoroscopy projection as c-arm or table position changes

• Device enhance processing improves visualization of fine metallic interventional devices

• Simple, convenient user interface for manual adjustment, if desired

• Multiple display modes, solid or hollow vessel with transparency adjustment

Prerequisite: XIDF-3DI801, XIDF-ROT801 and XIDF-3DP801/B2 software and hardware (3D-ANGIO-KIT/5.100)

Live fluoroscopy(without injection)

3D volumerendering of vessel

3D Roadmap(Real time)

rev. 02/13

XIDF-TAV803TAVR Software Kit for Angio Workstation

3Mensio Valves software • Integrated transcatheter aortic valve replacement (TAVR) Planning software from PIE Medical Imaging B.V. • Performs the aortic valve analysis and detects the best working angle from 3DCTA or XA3D image data• Provides access route planning/analysis to confirm best approach for individual patient• The optimal angle converts to the Infinix-i c-arm by tableside operation (Auto-Angle)

CAAS A-Valve software• TAVR viewing angle software• Detects the best working angle from two 2-D XA images• The optimal angle converts to the Infinix-i c-arm by tableside operation (Auto-Angle)• Also used for post-deployment valve analysis such as aortic wall apposition and/orpara-valvular leak Includes 32 hours on-site Applications training

Prerequisite: DFP-8000A/W4 with v4.40 software minimum; XIDF-ROT801 Rotational DSA Kit; XIDF-AWS801 Angio Workstation; 3D-ANGIO-KIT/5.100or 3D-ANGIO-VES/2.100

rev. 02/13

XIDF-LCI801Low Contrast Imaging

This option is available on all mid-size (12”x12”) and large (12”x16”) Field-of-View (FOV) flat-panel detectors.

This feature provides for the acquisition and display of “CT-like” imaging. • Select acquisition of 2-D image data sets of approximately 250, 400 or 600 images/projections. Approximate acquisition times: - 250 images: 10 seconds - 400 images: 15 seconds - 600 images: 20 seconds

• The higher the image number, the better the resolution of the resulting 3-D volume and MPR’s (Multi-Planar Reformations).

• Image display parameters are optimized to low-contrast image densities, and are particularly useful for soft-tissue diagnosis.

• LCI images are transferred and displayed on the 3-D workstation automatically from the DFP-8000 upon completion of acquisition

Prerequisite: XIDF-3DI801, XIDF-ROT801 and XIDF-AWS801 software and hardware (3D-ANGIO-KIT/5.100)

rev. 02/13

XIDF-3DP8033D Multi Modality Fusion Roadmap Software

3D Multi Modality Fusion Roadmap is a software application that enables overlay of live 2D fluoro images, with previously acquired 3D image data sets, to enhance 3D anatomical reference. The previously acquired 3D data sets can be rendered from either a CT scanner or the Toshiba Infinix-i systems using LCI or 3D Angio.

3D volumes are rendered using the Infinix-i 3D reconstruction PC, then projected on the Infinix-i exam room monitor where it is overlaid by live 2D fluoro images. This functionality enables real-time integration of 3D anatomical information to better aid clinical guidance and procedure planning. Automated C-Arm positioning is integrated with the 3D anatomical reference image for enhanced clinical workflow.

rev. 02/13

CV-3D3D QCA Measurement Software

Stand alone workstation and Software

Includes QCA301 software for reconstruction of single and bifurcated segments of coronary vessels for lesion assessment

Includes QCA302 hardware which interfaces to the DFP for transmission of 2D angio images

rev. 02/13

Table Accessories

rev. 02/13

XBFS-880SAdditional Footswitch for Single Plane and Dual Plane

Compatible with software V3.30 and later

SOI is required to combine for upgrading systems manufactured before February 2005

rev. 02/13

XBFS-880BAdditional Footswitch for Biplane

Compatible with software V3.30 and later

SOI is required to combine for upgrading systems manufactured before February 2005

rev. 02/13

XBAC-001ATable Top Arm Board

For CAT-850B and CAT-880B tables

Wide width table top option for additional arm support

rev. 02/13

XBAR-001AArm Rest


This comes standard with new CAT-850B equipped system

Optional for CAT-880B equipped system

rev. 02/13

XBAR-110ADual Arm Rest


rev. 02/13

XBHG-001AAbove Head Hand Grips

For CAT-850B table

rev. 02/13

XBAR-110ADual Arm Rest


rev. 02/13

XBFG-001AFree-Slide Mushroom Grip

For CAT-850B, CAT-870B, and CAT-880B

Mushroom switch that releases the table brake, allowing for a free floating table top in lateral and longitudinal directions

Note this same operation can be done using the standard hyper handle

Can connect up to two per system

rev. 02/13

XBFG-850BTabletop Control Console

For CAT-850

Free-slide mushroom grip withadditional functionality

Able to connect one per system

rev. 02/13

XBHR-001AHead-End Mushroom Grip

For CAT-850B table

This option is valuable for EP where head end procedures are performed

Includes free-slide mushroom grip

rev. 02/13

XBER-001AExtension Rail


This allows the table and c-arm controls to be further forward on the table. Allows doctors to maneuver the table/C-arm and image replay functions easily for pediatric patients

Extension Rail

rev. 02/13

XBET-001ATable Top Extension


XBER-001A is required for this item

rev. 02/13

XBAM-001ATable Accessory Rail

For CAT-880B table only

Additional table accessory rail for head-end area highlighted in red in lower left image

rev. 02/13

XBDB-001ADrape Holder

For CAT-880B table

For head-end area highlighted in red in lower left image.

rev. 02/13

MIAB-600Rest Easy Armboard

For CAT-850B/870B table

For Prone patient position

rev. 02/13

MIAB-880Rest Easy Armboard

For CAT-880B table

For Prone patient position

rev. 02/13

345AFSAnti-Fatigue Floor Mat

For All Infinix-i configurations

rev. 02/13

DSA-2CHead Positioner

For CAT-850B table

(current design not compatible with CAT-880B)

rev. 02/13

21557Replacement Pads for DSA-2C

For CAT-850B table

rev. 02/13

9406Supine Arm Support

For All Infinix-i tables

New design, spring 2012, replaces prior “smoked-colored acrylic” design

rev. 02/13

9407Knee Support Pad

For CAT-850B table

Infinix Knee Support Pad - 9.11” x 21.88” x 18.33” white coated foam knee support for Infinix tables

rev. 02/13

94092” Table Pad

For CAT-850B/870B tables

Hybrid Foam Table Pad measuring 2” x 27.6” x 86.6” with black stretch vinyl cover

rev. 02/13

94103” Table Pad


Hybrid Foam Table Pad measuring 3” x 27.6” x 86.6” with black stretch vinyl cover

rev. 02/13

9411Head Holder Kit


Infinix Head Holder Kit - Effective immobilization and comfortable positioning tool for a patient’s head during vascular imaging procedures. Includes head holder, forehead strap and pads, and neck wedges

rev. 02/13

94122” Thick Work Area Pad

For All CAT tables

Work Area Pad - 2” x 27.6” x 29.5“ padwith black stretch vinyl cover for usewith 2” Table pads

rev. 02/13

94133” Thick Work Area Pad

For All CAT tables

Work Area Pad - 3” x 27.6” x 29.5“ padwith black stretch vinyl cover for usewith 3” Table pads

rev. 02/13

9414AEP Table Width Extender


Infinix carbon fiber EP table width extender, also provides for attachment of CARTO heart mapping device via bottom-side nylon rails, Dimensions: head section width 11”, shoulder width 27.56”, overall length 55.12”

rev. 02/13

941530” Removable Rail

For All CFI Medical Table width extenders

Rail Dimensions are 10mm x 25mm (European Rail spec size)

rev. 02/13

9416Neuro Adapter

For All CFI Medical Table width extenders

For CAT-850B/870B tablesIncludes set of two 15” removable accessory rails for narrowed head-end, providing for attachment of Mayfield or Sugita cranial fixation devices for neurosurgery

rev. 02/13

9417Bariatric Table Width Extender

For CAT-850B table

Equipped with safety strap slots, safety straps must be ordered separately

rev. 02/13

9424Bariatric Strap Set

For CAT-850B table, Infinix Strap Set, Bariatric, set of 3, for use with the 9417 Bariatric Extension w/strap slots

One shown, three provided

rev. 02/13

9425Foot-End Accessory Rail

For All Infinix-i tables with standard accessory rails – not compatible with extendable accessory rail set XBER-001A

rev. 02/13

9445Foot-End Accessory Rail for XBER-001A

For CAT-850B and CAT-880B tables with Extendable rail option XBER-001A - will NOT fit onto standard accessory rails

rev. 02/13

9429Neuro Adaptor Pad

Made to fit Infinix Neuro Adaptor 9416 for CAT-850B, and 9441 Neuro Adaptor forCAT-880B

rev. 02/13

943115” Detachable Rail

For CFI Medical Table width extenders (cannot be attached directly to Infinix-i tabletop

9.4 mm x 28.5 mm x 15” Removable Accessory Rail for use with all table extensions. Sold individually, not soldas a set.

rev. 02/13

9432Bariatric Table Width Extender


Detachable rails sold separately (part 9415)

rev. 02/13

9434Hybrid Table Adaptor

For CAT-880B table

Hybrid OR table extender – widens table to 22” from original 18” width, and provides flat clamping surface for attachment of Accessory rails

rev. 02/13

9438Accessory Rail Set

For All CFI Medical Infinix-I table wideners 9414A, 9416, 9417, 9432, 9434, 9441

Designed to OR spec rail size (9.4mm thick x 28.5mm high) and includes Clark socket “notches” between clamp assemblies for quick and easy attach/detach

rev. 02/13

9441Hybrid Table Adaptor

For All CFI Medical Infinix-I table wideners 9414A, 9416, 9417, 9432, 9434, 9441

Designed to OR spec rail size (9.4mm thick x 28.5mm high) and includes Clark socket “notches” between clamp assemblies for quick and easy attach/detach

rev. 02/13

94482” Table Pad

Made to exact shape of CAT-880B tabletop

Hybrid Foam Table Pad memory/eva hybrid foam pad for CAT880B with black stretch vinyl cover

rev. 02/13

Radiation Shieldsand Lights

rev. 02/13

CAT-TRS/V2Table Mounted Radiation Shield

Lower body protection shield with one removable upper shield (225mm)

rev. 02/13

WD2571Portable Radiation Shield

Steel plate body (Pb 1.00 mm), height adjustable lead acrylic shield (Pb 0.50 mm); Width: 77.5 cm, Height: 115 - 188 cm

rev. 02/13

Quoting Process Steps For Mavig Ceiling Solutions

1. Select one of the three initial options; • 2.5M Ceiling Track • 4.0M Ceiling Track • 360 Fixed Column

2. Choose up to two options from below categories; • Radiation Shields • Surgical Lights (max of 1 per configuration) • Dual Monitor Suspension Arm

rev. 02/13

2.5M-CEILING-TRACK2.5M Ceiling Track for Radiation Shields, Lights and Monitors

Includes: • 2.5M Ceiling Track • 360 Column with one electrified pin for mounting surgical light • Brake handle strap

Supports up to 2 devices, only 1 light per suspension

rev. 02/13

4.0M-CEILING-TRACK4.0M Ceiling Track for Radiation Shields, Lights and Monitors

Includes: • 4.0M Ceiling Track • 360 Column with one electrified pin for mounting surgical light • Brake handle strap


rev. 02/13

360-FIXEDFixed 360 Ceiling Column

Includes: • Ceiling mounting plate • 360 Column with one electrified pin for mounting surgical light


rev. 02/13

OT50001-USContour Cut Shield with 75/90cm Ext Spring Arm

Includes: • Extension spring arm (75/90cm) with 75 degrees of vertical range

• Contour cut radiation shield (Pb 0.50mm)

rev. 02/13

OT9001-USContour Cut Shield with 95/90cm Ext Spring Arm


• Contour cut radiation shield (Pb 0.50mm)

rev. 02/13

OT50002Mavig Center Mount Rectangular Shield (50x40cm)


• Radiation shield (Pb 0.50mm)

rev. 02/13


with Lead Rubber Panels



rev. 02/13


with Contour Cut-Out



rev. 02/13




• Lateral Mount Radiation shield (Pb 0.50mm) with lead rubber panels

rev. 02/13





rev. 02/13





rev. 02/13

SURGICAL-LIGHTS-OC Option Class for Surgical Lights

Includes: • 2.5M Track Cable Spooler

A maximum of one (1) light can be selected per ceiling track system, see next slides for options

rev. 02/13

Single Color vs. Multicolor Surgical Lights

MultiColor lights enable application specific control of light output for optimal viewing based on tissue type and field texture

Five different color temperature settings (Kelvin) • 3750 • 4000 • 4250 • 4500 • 4750

Color setting can be changed using the lamp key pad or by turning the handle ring

rev. 02/13

LE70043 Mavig M130F LED Lamp

Includes: • Includes extension spring arm (75/90cm) with 95 degrees of vertical range

Technical Specifications LED 130 FCentral light intensity at a distanceof 1 meter

60.000

Color rendering index R(a) general 95Focusable light field size (in cm) 14-25

focusableColor temperature (Kelvin) 4500Electronic light intensity control at the lamp head

50%-100%

Temperature increase in head area 0,5° CTotal power consumption 20 WNumber of LEDs 19Lifespan of LEDs > 40.000 hWorking distance (in cm) 70 -140Height adjustment (in cm) 119Diameter of the lamp head (in cm) 33

rev. 02/13


LE70044 Mavig M2 SC LED Lamp - Single Color White

Technical Specifications LED 2 SCCentral light intensity at a dis-tanceof 1 meter

100.000

Color rendering index R(a) at 4500 kelvin

95

Focusable light field size (in cm) 14-28Color temperature (Kelvin) 4500Electronic light intensity control at the lamp head

50%-100%

Temperature increase in head area

0,5° C

Total power consumption 35 WNumber of LEDs 21Lifespan of LEDs > 40.000 hWorking distance (in cm) 70 -140Height adjustment (in cm) 118Diameter of the lamp head (in cm) 49

rev. 02/13

LE70045 Mavig M2 SC LED Lamp - Multicolor


Technical Specifications LED 2 MCCentral light intensity at a distanceof 1 meter

100.000

Color rendering index R(a) at 4500 kelvin > 96Focusable light field size (in cm) 14-28Color temperature (Kelvin) 3750,4000,

4250, 4500, 4750

Electronic light intensity control at the lamp head

50%-100%

Temperature increase in head area 0,5° CTotal power consumption 90 WNumber of LEDs 84Lifespan of LEDs > 40.000 hWorking distance (in cm) 70 -140Height adjustment (in cm) 118Diameter of the lamp head (in cm) 49

rev. 02/13

LE70072 Mavig M3 SC LED Lamp - Single Color Light


Technical Specifications LED 2 SSCLight intensity at a distanceof 1 meter

130.000

Color rendering index R(a) 95Color rendering index R9 (red) -Focusable light field size (in cm) 17-28Color temperature (Kelvin) 4500Electronic light intensity control at the lamp head

Standard

Dimming range 5 - 100%Temperature increase in head area 0,5° CTotal power consumption 45 WNumber of LEDs 28Lifespan of LEDs > 40.000 hWorking distance (in cm) 60 -150Height adjustment (in cm) 118Diameter of the lamp head (in cm) 57

rev. 02/13

LE70074 Mavig M3 MC LED Lamp - Multicolor



130.000

Color rendering index R(a) at 4300 Kelvin

> 96

Color rendering index R9 (red) at 4300 Kelvin

> 90

Focusable light field size (in cm) 17-28Color temperature (Kelvin) 3750, 4000,

4250, 4500, 4750


Standard


rev. 02/13

LE70078 Mavig M3 MC LED Lamp with Video - Multicolor



130.000

Color rendering index R(a) at 4300 Kelvin

> 96

Color rendering index R9 (red) at 4300 Kelvin

> 90

Focusable light field size (in cm) 17-28Color temperature (Kelvin) 3750, 4000,

4250, 4500, 4750


Standard


rev. 02/13

MONITOR-SUSPENSION-OC Dual Monitor Suspension Arm

Includes: • Portegra2 Monitor Support for Two Monitors • MAVIG Portegra2 Non-Electrified Spring Arm (75/91 cm) with 95 degrees of vertical range

• Cable Holders for Ceiling Track

15 kg maximum load supportVESA 100 MountsExternally cabledMonitors sold separately

rev. 02/13

Equipment Booms

rev. 02/13

STD-EQ-BOOM Equipment Boom, Fixed Height - Standard Configuration

Components: • Fixed-height, dual-arm, ceiling-mounted system fixed with friction-based stability controls - 39.5” upper arm - 31.5” lower arm

• One installation kit with mounting plate

• One center-aligned carrier – 36”x22”, containing 28 blank faceplates for customization

• Six, 20A duplex red receptacles

• Three, 22” shelves

• One wing bar with a four-hook IV tree

• One basket – 13”x6.5”x 4” (can be rack mounted)

rev. 02/13

EP-FH-EQ-BOOM Equipment Boom, Fixed Height - Premier Configuration

Components: • Fixed-height, dual-arm, ceiling-mounted system fixed with friction-based stability controls - 39.5” upper arm - 31.5” lower arm



• Eight, 20A duplex red receptacles


• One locking metal drawer (serves as a fourth shelf)

• Medical gas outlets for air, oxygen, vacuum and nitrogen


• One basket – 13” x 6.5” x 4” (can be rack mounted)

rev. 02/13

EP-AH-EQ-BOOM Equipment Boom, Adjustable Height - Premier Configuration

Components: • Adjustable-height, dual-arm, ceiling-mounted system fixed with friction-based stability controls - 39.5” upper arm - 31.5” lower arm



• Eight, 20A duplex red receptacles


• One locking metal drawer (serves as a fourth shelf)

• Medical gas outlets for air, oxygen, vacuum and nitrogen


• One basket – 13” x 6.5” x 4” (can be rack mounted)

rev. 02/13

rev. 02/13

Documents

Vascular Accessory Portfolio rev. 02/13