Vam Drilling Catalog

From simpleto complex drill strings,

VAM Drillingmanufactures it all.

Drill Pipe

Heavy Weight Drill Pipe

Drill Collars

Performance Drilling Systems

Services and Accessories

Vallourec Group

Our slogan Designed to Perform is the result of a long adventure which began over three years ago whenV&M TUBES Drilling Products, OMSCO Inc. and SMF-International came together to become VAM Drilling,now one of the most recognized producers of innovative drill stem products in the world. Since then, VAMDrilling has grown tremendously with the acquisition of DPAL and Protools in the Middle East and with theinvestment in a new welding line in the Vallourec & Mannesmann do Brasil Mill. VAM Drilling today is a trulyinternational drilling solutions provider supplying products and services close to where our clients are active.Through its vertical integration with the Vallourec Group, VAM Drilling is able to guarantee the superiorquality of its raw materials and to develop new steel grade technologies to ensure superior performance.

Our company has brought together experts with a variety of backgrounds in a number of locations, allworking towards the same common goal: bringing our clients the best possible products and services fortheir most challenging drilling needs.

Reaching our goal is made possible by the core values which are shared by every VAM Drilling employee:commitment towards our customers and their needs combined with the know-how to provide customized

solutions based on recognized processes and proven products.

Designed to Perform is VAM Drillings way of highlighting not only our innovative products,but also the values that our employees implement in their everyday tasks. Our products aredesigned for and our people are dedicated to bringing you optimum performance. At VAMDrilling, our success is measured by our clients satisfaction.

I hope you will enjoy our VAM Drilling Catalog, which summarizes our innovative service andproduct offer. We have done our best to provide you with the most detailed information possible,but since our offer is vast, if you have any additional questions please contact one of our nearestsales representatives. You will find a list of contacts on the inside back cover of this catalog.

Happy reading!

Why VAM Drilling is Designed to Perform

Dirk BisselVAM Drilling Managing Director

VAM DrillingVAM Drilling Designed to Perform . . . . . . . . . . . . . . . . . . . 1Vertical Integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Products From the Rig Floor to the BHA . . . . . . . . . . . . . . 3Engineering and R&D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Services Before Drilling Pre-Project Planning . . . . . . . . . . 5Services During Drilling Field Service . . . . . . . . . . . . . . . . 6Services After Drilling Machine Shops . . . . . . . . . . . . . . . . 7Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Corporate Responsibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

ConnectionsAPI Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11VAM Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12VAM EIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14VAM CDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

GradesHigh-Strength Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Sour Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Low-Temperature Grades . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Drill PipeDrill Pipe Designed to Go Deep . . . . . . . . . . . . . . . . . . . . 23Drill Pipe Manufacturing Flow Chart . . . . . . . . . . . . . . . . . . 24Drill Pipe and Tool Joint Data . . . . . . . . . . . . . . . . . . . . . . . 26Drill Pipe and Tool Joint Data Sour Service . . . . . . . . . . . 42Drill Pipe and Tool Joint Data High Performance. . . . . . . 48Drill Pipe Performance Datasheet. . . . . . . . . . . . . . . . . . . . 50Drill Pipe Inquiry Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Heavy Weight Drill Pipe (HWDP)Heavy Weight Drill Pipe (HWDP) Gradual Transitionand Weight in Complex Wells. . . . . . . . . . . . . . . . . . . . . . . . 53Heavy Weight Spiral Drill Pipe (HWSP) . . . . . . . . . . . . . . . 55Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Heavy Weight Drill Pipe (HWDP)Manufacturing Flow Chart. . . . . . . . . . . . . . . . . . . . . . . . . . 58Heavy Weight Drill Pipe Data . . . . . . . . . . . . . . . . . . . . . . . 60Heavy Weight Drill Pipe Data Sour Service . . . . . . . . . . . 66HWDP Performance Datasheet . . . . . . . . . . . . . . . . . . . . . 70Heavy Weight Drill Pipe (HWDP) Inquiry Form. . . . . . . . . . 72

The data provided in this catalog is for general information only. While every effort has been made to ensure the accuracy of all data and information contained herein, VAM Drilling assumesno responsibility or liability for loss, damage or injury resulting from the use of this material. All uses of the information presented in this catalog are at the users own risk and responsibility. 2011 VAM Drilling. Unless otherwise specified, the Vallourec Group and its subsidiaries are sole owners of all content including, and without limitation, all patents, trademarks, copyrightsand other intellectual property rights thereto.

Table of Contents

1 VAM Drilling

11 Connections

17 Grades

23 Drill Pipe

53 Heavy Weight Drill Pipe

Table of ContentsDrill Collars

Drill Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Spiral Drill Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Slip and Elevator Recesses . . . . . . . . . . . . . . . . . . . . . . . . 75Drill Collar Manufacturing Flow Chart . . . . . . . . . . . . . . . . . 76Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Hardbanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Drill Collar Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Drill Collar Performance Datasheet. . . . . . . . . . . . . . . . . . . 84Drill Collar Inquiry Form . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Performance Drilling SystemsHydroclean Reducing Non-Productive Time . . . . . . . . . 87Hydroclean Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89VAM DPR SR For Deepwater Completionand Workover Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 90VAM DPR HP For High-Pressure Ultra-Deep WaterCompletion and Workover Operations . . . . . . . . . . . . . . . . 91Landing Strings For Casing Running and SubseaEquipment Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Non-Magnetic Materials For Directional Drilling. . . . . . . . 93

AccessoriesKellys A VAM Drilling Standard. . . . . . . . . . . . . . . . . . . . . 95Square and Hexagonal Kellys Data . . . . . . . . . . . . . . . . . . 96Safety Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Upper and Lower Kelly Valves . . . . . . . . . . . . . . . . . . . . . . 98Upper and Lower Kelly Valves Data . . . . . . . . . . . . . . . . . . 99Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Check Valves Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Pup Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102Drill Stem Subs, Rotary Subs, Lift Subs and Lift Plugs. . . 103Drilling Stabilizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

OptionsClient Specifications and Inspections . . . . . . . . . . . . . . . . 105Hardbanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Make and Break Saves You Money . . . . . . . . . . . . . . . . 107Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Thread Compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Thread Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . inside back cover

73 Drill Collars

87 Performance Drilling Systems

95 Accessories

105 Options

The data provided in this catalog is for general information only. While every effort has been made to ensure the accuracy of all data and information contained herein, VAM Drilling assumesno responsibility or liability for loss, damage or injury resulting from the use of this material. All uses of the information presented in this catalog are at the users own risk and responsibility. 2011 VAM Drilling. Unless otherwise specified, the Vallourec Group and its subsidiaries are sole owners of all content including, and without limitation, all patents, trademarks, copyrightsand other intellectual property rights thereto.

VAM DrillingDesigned to Perform

VAM Drilling is afully integratedmanufacturer ofboth API andhigh-performancedrilling products.

VAM Drilling is one of the worlds largest fully integratedmanufacturers of drill pipe and associated drillstem products.All of our products are designed to meet the most demandingspecifications for todays drilling market. VAM Drilling is a subsidiaryof the Vallourec Group, a world leader in the design and productionof seamless steel tubes for diversified industrial applications (oil andgas, power generation, petrochemicals, automotive and mechanicalengineering industries).

The VAM Drilling product lines combine a full range of drilling tubularsand accessories. From the rig floor to the bottomhole assembly (BHA),VAM Drilling products are available in a variety of steel grades withstandard API or proprietary high-performance connections.

With performance manufacturing facilities in Brazil, France, theNetherlands, the United Arab Emirates and the United States,VAM Drilling supplies drilling products and services worldwideand has earned an international reputation for quality. Ourrepresentatives combine professionalism and responsivenessto ensure that our clients are completely satisfied.

1

At VAM Drillingwe are committed toour clients success. HEADQUARTERS

MANUFACTURING FACILITIES

REGIONAL SALES OFFICES

VAM Drilling is truly vertically integrated, providingdrillstem products from the mill to the well.VAM Drilling, through parent company Vallourec,has its own mills, ensuring continuous supply ofraw materials.

VAM Drilling receives green tubes from V&MTubes mills in Saint-Saulve (France); Mlheim(Germany); Youngstown, Ohio (USA); andBelo Horizonte (Brazil). Tubes are upset andheat-treated to the required specifications atVAM Drillings manufacturing plants in Europeand the United States. Other welding lines aresituated in South America and the United ArabEmirates. Tool joint forgings are supplied byVAM Drilling France and American producers,and are machined and phosphated prior to frictionwelding in VAM Drilling plants.

Vertical Integration

Being part of the Vallourec Groupensures VAM Drilling a continuoussupply of raw materials, to improvedelivery and to mitigate costs.

After the tubes have been upset, heat-treatedand welded to the tool joint, they are inspectedand can be coated internally and externallybefore shipment. Manufacturing includes bothAPI and high-performance products, such asVAM Drillings proprietary connections VAM EIS

and VAM Express; H2S resistant materials; orhigh-strength steel grades.

VAM Drillings plant in Cosne-sur-Loire (France)manufactures its patented Hydroclean productline. Bottom-hole assembly and accessoryproducts such as kellys, heavy weight drill pipe,rotary subs, non-magnetic drill collars, spiral-grooved drill collars, slick drill collars, safetyvalves, etc. are also produced in France, theUnited States and the United Arab Emirates.

ProductsFrom the Rig Floor to the BHA

Drill Pipe: 2-3/8 to 6-5/8, Range 2 and 3

Heavy Weight: 2-7/8 to 6-5/8, welded or integral

Drill Collars: 2-7/8 to 14, slick or spiral

API and High-Performance Connections:

API connections; VAM EIS: API compatible high-torque connections; VAM CDS: compatible with API and certain otherdouble-shoulder connections;

VAM Express: proprietary high-torque connections; VAM DPR SR and VAM DPR HP: proprietary gas-tightdrill pipe riser connections.

Steel Grades: API, Sour Service, high strength, coldtemperature, non-mag material grades.

Drillstem Accessories: Square or hexagonal kellys,kelly valves, drop-in check valves, IBOPs, pup joints,crossovers, subs.

Performance Drilling Systems: Hydroclean drillpipe, Hydroclean heavy weight, risers, landing strings.

VAM Drilling is more than a manufacturerof drilling tubulars, supplying a completerange of proprietary drillstem products.VAM Drilling also designs and providestailor-made systems to help clients

succeed in increasinglychallenging well profiles

and drilling programs.

VAM EIS proprietaryhigh-torque connections

VAM Drilling offers thefollowing standard product lines:

3

VAM Drilling is an industry leader in downhole product design andproduction. With its renowned engineering base, VAM Drilling isable to improve both the performance and the mechanical propertiesof products.

Because we are continually analyzing and improving our designparameters, we can guarantee that our materials and final productswill perform better than API and ISO standards and bring ourclients added value.

Research and Development

With research and developmentcapabilities that cover the entiredrill string production process (fromsteel development to final productmanufacturing), VAM Drilling is incomplete control of its own productionprocess and can answer mostcustomer needs internally.

VAM Drillings research anddevelopment resources includeindustry experts and experiencedengineering personnel, along with acomplete array of testing facilities. Inorder to better ensure the performanceof your products, VAM Drilling canapply combined drilling loads andsimulated field conditions in-houseon full-scale samples.

When a new product leaves ourresearch and testing facilities, youcan rest assured it has been fullyanalyzed, field tested and evaluatedand that it is ready for service.

Engineering

API has long been a reference for the oil and gas industry. Todaysdrilling conditions, however, are becoming increasingly complex,with deviated and extended reach wells and corrosive environments.This means that the demand for highly engineered products hasnever been greater.

VAM Drilling connects the dots betweencustomer needs for drilling products andthe processes required to produce them.

Engineering and R&D

Services Before DrillingPre-Project Planning

Drill string design: With efficient product selection supportfrom VAM Drilling during the planning phase, you canminimize your drilling risks, maximize operationalperformance and be more cost efficient.

Customer specification design: By working with usto define your own specific product manufacturingspecifications based on your expected drillingconditions, you can minimize drilling risks andmaximize drill string service life.

Rig crew and drilling contractor training (VAM Schools):Through VAM Schools you can build on your humancapital and solidify your teams understanding of theirdrilling environment. By maximizing their performance,you minimize your risks and costs.

Capacity reservations: As a privilegedVAM Drilling partner, you can be sure thatour products will be available for you, whenand where you need them, in the shortesttime available.

Enhanced and third party inspections:Through its years of experience, VAM Drillinghas developed excellent working relationshipswith third party inspection companies andknows how to facilitate any inspection orinspection process.

Our goal is to ensure that your products aredelivered according to your specifications inthe shortest lead-times possible.

Connecting Customer Needs

At VAM Drilling, we know that a successful drilling project depends on the decisions made before the firstjoint of drill pipe is run through the rotary table. That is why VAM Drilling offers a wide range of services tohelp contractors and operators guarantee project success well in advance of the drilling phase. Our ultimategoal is to reduce lost time and maximize your operational performance. To meet this goal, we have engineersand specially trained staff prepared to assist you with:

5

Services During DrillingField Service

SERVICE OBJECTIVES AUDIENCE TOOLS

On-siteRig

Support

Assist with the running of VAM Drilling pipe on a dedicated rig.

Provide instructions to the drillers in real time to achieve:

Optimal torque, taking into account dope friction factorand PDS recommendations/wear status

Proper handling/cleaning of the pipes on deck,to and from the rig floor

Quick inspection and gauging of the pipes to determinewear status or if they are to be sent for inspection

Optimal (longer) service life for VAM Drillingsupplied products

Proper setup of equipment (top drive, tongs, ironroughnecks, gauges) to ensure proper handling of thepipe and connections.

Global Field Services

VAM Drilling understands that you may need assistance throughout your drilling program. To supportthis we provide a global service with field engineers who are trained professionals and have hands-ondrill pipe running experience. They can provide rig advisory and inspection services to ensure that yourVAM Drilling premium drill pipe is run in a manner that guarantees optimal performance. VAM Drillingfield service engineers are there where and when you need them.

Carrying out inspections on connections inorder to make all necessary recommendationsfor the repair of damaged pipe and rejectingpipe that has been damaged beyond saferunning guidelines.

Checking the suitability of make-up andhandling equipment in order to ensure thatcorrect parameters are being used.

Assisting in supervising drill pipe running andmaking recommendations as necessary toensure that VAM Drilling approved torqueand make-up procedures are applied. Uponcompletion of the job, a written report withinspection results and joint make-upperformance will be issued.

Field engineers are available for local support with: All VAM Field Service engineers regularlyattend VAM Drilling product training and havebeen trained in offshore survival techniques incompliance with european standards.

Major oil and gas companies and drillingcontractors have recognized the added valuethat can be gained through the use of ourVAM Drilling field engineers.

Drilling Crew VAM FieldProcedure

DP InspectionProcedure

Product DataSheet

RunningProcedures

I-Box

Services After DrillingMachine ShopsVAM Drilling Licensee Network

With more than 70 licensees strategically locatedto meet your needs, VAM Drilling has a localmachine shop network to provide any repair servicesthat may be necessary following the completion ofthe drilling program.

Authorized repair and accessory threading facilitiesare located in more than 40 countries. Every year, newsupport facilities are added to this list in order to ensurewe can provide back-up for exploration and developmentprojects, even in the most remote locations.

Quality Control

Each licensee is issued a completeset of TSLI (Technical Specificationsfor Licensees), which highlight thenecessary manufacturing andcontrolling procedures forthreading VAM connections.

Annual audits are performed byVAM representatives to ensure thatour licensed machine shops respectour strict quality standards. Accessto specially calibrated VAM gaugesis critical, so they are always ready

for immediate dispatch to licenseesin order to ensure continual productquality and prompt product delivery.

7

Quality

The performance of VAM Drillingproducts is critical to the drillingprocess, no matter what the conditionor where. Whether the application is fora shallow well in the Middle East or adeepwater HP/HT well in the Gulf ofMexico, VAM Drillings product qualityis never in question.

By monitoring quality at all stages ofproduct manufacturing from theseamless green tube to finished drillpipe and drillstem components VAMDrilling ensures a superior product.Adherence to the most rigorousindustry standards or unique customerspecifications (as well as VAM Drillingsstringent design specifications) ensuresthat the products delivered to the fieldare immediately suitable for use.

Where applicable, VAM Drilling productsare manufactured in compliance with thefollowing API standards:

API Specification 5DP (ISO 11961) API Specifications 7.1 & 7.2 (ISO10424:2004 & ISO 10424-2:2007)

API Recommended Practice 7G(ISO 10407:1993)

In addition, VAM Drilling products can besupplied with the following specifications:

NS1 DS1 IRP 1.8 Customer-supplied specification

VAM Drilling facilities meet the followingquality standards:

API Specification Q1 ISO 9001 ISO 11961

By monitoring quality at all stages ofmanufacturing, VAM Drilling ensuresa superior product.

By monitoring quality at all stages ofmanufacturing, VAM Drilling ensuresa superior product.

VAM Drilling guarantees superior products.

Corporate Responsibility

Health and Safety of Employees are Paramount

To that end, VAM Drilling has developed a policy to:

Consistently comply with international agreementsand national laws, while respecting and fulfillingcountry specific needs.

Deploy Continuous Improvement Teams (CIT) inthe context of a Total Quality Management (TQM)program.

Constantly optimize the performance of theworkforce, with vocational training programs andefficient Competency Management (CM) systems.

In recognition of these efforts, VAM Drillingwas awarded OHSAS 18001.

As part of the Vallourec Group, VAM Drilling bases its development on the operational excellence ofits staff and the high motivation of respected individuals. Because we manufacture some of the finestdownhole products in the industry, using high-tech, safety-oriented facilities, the health and safety ofall employees are paramount to the manufacturing process.

9

The health and safety of all employees areparamount to the manufacturing process.

Environment

As part of the Vallourec Group, VAMDrillings policy is to respect laws andregulations, prevent pollution in order tomaintain the earths biodiversity, andensure our continuous improvement inthis field and in others.

Our growth is based on an optimal useof resources, and more specificallynon-renewable resources such as rawmaterial and energy, and on an R&Dpolicy for clean technologies andenvironmentally friendly products.

Priorities of our environmental policy include:

Reduction of our carbon footprint; Avoidance of soil and water pollution; Reduction of water consumption, and adequatewastewater treatment;

Reduction of air pollution; Reduction and clean disposal of industrial waste; and Reduction of noise annoyance.

Each manufacturing facility methodically identifies itsenvironmental risks and puts the necessary measuresin place to prevent and control these on a daily basis.

All new investments or product developments includea study of their environmental impact.

In recognition of these efforts,VAM Drilling was awarded ISO 14001.

VAM Drilling Takes Care of Its Environment

API Connections

In addition to industry accepted API tool joint connections,VAM Drilling provides its advanced VAM EIS, VAM CDS

and VAM Express high-torque threads upon request.

VAM Drilling provides AmericanPetroleum Institute (API) certifiedconnections in a variety of pipelengths, diameters and steel gradesand is licensed for:

API Specification 5DP (ISO 11961)

API Specifications 7.1 & 7.2 (ISO10424:2004 & ISO 10424-2:2007)

API Recommended Practice 7G(ISO 10407:1993)

For detailed dimensional information,see API Specification 7.

11

VAM Express

Developed using the latestVAM connection technology,the patented VAM Express

connection incorporates aproprietary thread profileand high-performance double-shoulder design producingthe most rugged high-torqueconnection available today.The primary torque shoulderprovides initial seal and pre-load during make-up to fullrecommended torque and thesecondary torque shoulderprovides high-torque capacity.

Trip time is money.

With the easy stabbing

and quick make-up

of the VAM Express

high-performance

connections, drilling

contractors can save

valuable rig time,

resulting in significant

cost saving on

each well.

PRIMARY SEALING EXTERNAL SHOULDER

API THREAD FORM

1 reverse angle crest

Laid down 40 stabbing flank

Elliptical root

30 loading flank

VAM EXPRESS THREAD FORM

SECONDARY INTERNAL SHOULDER

VAM EXPRESS THREAD FORM

VAM Express high-performanceconnections run like API.

Typical Tool Joint Data and Comparison

CONNECTION TOOL JOINT MAKE-UP TORSIONAL TENSILETORQUE STRENGTH STRENGTH

TYPE SIZE OD (IN) ID (IN) (FT-LBS) (FT-LBS) (LBS)

API NC38 4-3/4 2-9/16 11,500 19,200 649,000

VX38 4-3/4 2-9/16 19,500 32,600 693,000VAM Express

VX39 4-7/8 2-13/16 20,100 33,500 713,000

API NC40 5-1/4 2-9/16 16,600 27,700 838,000

VX39 5 2-13/16 21,300 35,500 713,000VAM Express

VX40 5-1/4 3 25,400 42,300 818,000

API 5-1/2 FH 7-1/4 3-1/2 43,300 72,200 1,620,000

VX54 6-3/4 4 55,500 89,000 1,340,000VAM Express

VX57 7 4-1/4 58,800 94,200 1,400,000

Quick rig make-up. 67 turns from stab-in tofull make-up, similar to API connections withtrip-time savings up to 16% better than otherhigh-performance connections.

Higher torque. Torque capacity averages150 to 200% of that of API connections.

User friendly. Reduces stabbing damageand the need for stabbing or de-stabbingguides because of thread form design.

Durability. Reduces wedging risk, resultingin less thread damage and a low re-cut rate.

Strength. Allows change of OD/ID for improved hydraulic performance.

Gas-tight. Up to 5,000 psi differential working pressure.

The VAM Express (VX) thread form features a large, rounded stab crest and a laid down stab flankwhich allows easy stabbing of the connection. A back beveled crest reduces the chance of wedging thethread and increases the freedom of movement, allowing easy connection make-up. The elliptical rootincreases resistance to rotational-induced bending fatigue.

The patented VAM Express connection design provides:

VAM Express combines quickmake-up with exceptional

strength and durability.

Easy stabbing, higher torsional strength andextended service life save you time and money.

13

VAM EIS

VAM EIShigh-torque connections are fullyintermateable with API drill pipe connections.

VAM EIS is a high-torque

connection that is fully

intermateable with API connections

but incorporates a double-shoulder

tool joint design. As additional

torque is applied, the pin nose

makes contact with the internal

shoulder. The internal shoulder

absorbs the higher frictional load,

providing the connection with

improved torque capability.

VAM EIS

high-strength

double-shoulder

connections from

VAM Drilling set a

new connection

performance

standard at cost

efficiencies similar

to those of API

connections.

EXTERNAL SHOULDER

INTERNAL SHOULDER

API THREAD FORM

Higher Torque. Using theVAM EIS connections with current API ODs and IDsresults in torque capacity 50% higher (or more) than API.

Larger ID. Using VAM EIS improves hydraulicperformance while maintaining the required torque.

Smaller OD. Slimmer profile than currentAPI connections, while maintaining required strength,controlling torque and drag, and improving fishability.

Extended Service Life. Using the VAM EIS withstandard ODs and IDs results in an OD wear capability30% higher than API, which combined with a2 longer-than-standard tool joint, provides unbeatableservice life.

Flexibility. Intermateable with new or used API connections.

The additional torsional strength provides exceptional performance in the most difficult well conditions, such ashighly deviated or extended reach wells. This design also benefits service life, with a significantly greater wearcapability. VAM EIS is available in drill pipe sizes from 2-7/8 to 6-5/8 OD, including 5-7/8, and in a widerange of steel grades, including Sour Service and high strength. The VAM EIS tool joint design provides:

Additional torsional strength provides exceptionalperformance in the most difficult well conditions.

VAM EISdouble-shoulder connection isfully compatible with API connections.

15

VAM CDS

VAM CDS allows smaller ODsand larger IDs to achieve a slimmerprofile than current API connectionswhile maintaining the required torque.Alternatively, using the VAM CDSconnection with current API ODsand IDs results in connections witha 50% (or more) greater torquecapacity than API.

The VAM CDS connection offers:

Higher torsional strength

Improved hydraulics

Optimum for Sour Service

Longer service life

Full intermateability withcertain other double-shoulderconnections on the market andwith API connections.

VAM CDS offers significantly higher torsional performance thanAPI connections. The additional strength provides the highertorque required for deviated wells and drilling to extended depths.

Please contact your local VAM Drilling representative to confirmproduct compatibility.

VAM CDS high-torquedouble-shoulder connectionsare fully compatible withAPI and certain otherdouble-shoulder connectionsavailable on the market.

In deep well conditions,VAM CDS has additionaltorsional strength whichprovides exceptionalperformance.

Drill better and faster with fullycompatible premium connections.

100

80

60

40

20

0

100f

t-lbs

+50%+51%

+57%

+54%

+54%

NC31 NC38 NC50 5-1/2 FH 6-5/8 FH

VAM CDS API

Torsional Performance VAM CDS vs API

Tool JointOD (in)ID (in)

TorsionalYield(ft-lbs)

Make-upTorque(ft-lbs)

API(120 ksi)

VAM CDS(130 ksi)

6-5/83-1/2

6-5/83-1/2

44,500 67,700

26,700 40,600

Tool Joint Comparison

Note: Data based on API NC50 and NC50 VAM CDSconnections. OD and ID were selected to bethe same for comparative purpose only.

High-Strength Material

17

High-Grade Material forLighter and Stronger Solutions

Complex drilling environments,including ultra-deep and extendedreach wells, deep offshore orhigh-temperature and high-pressureconditions, are a real challenge fordrilling contractors and operators.For the most challenging drillingprojects, VAM Drilling hasdeveloped high-strength gradesincluding VM-140 DP, VM-150 DPand VM-165 DP.

VAM Drilling guarantees thesuperior mechanical properties ofits steel alloys through proprietarychemistry, strict quality proceduresand true vertical integration fromsteel making to drill pipe heattreatment and dedicatedmanufacturing process controls.

High-strength grades are idealfor the lighter drill pipes requiredto minimize torque and drag inultra-extended reach wells. Byusing high-strength material toreduce tube body wall thickness,lighter drill pipe joints can bemanufactured without compromis-ing mechanical performance.Reducing wall thickness alsoimproves hydraulic programs,making it easier to reach drillingtargets efficiently.

When stronger tubulars are neededfor ultra-deep or landing stringapplications, high-grade materialsoffer additional tensile capacity ascompared to API grades.

25%

20%

15%

10%

5%

0

100ft-l

bs

Tensile and Torsional StrengthImprovement over S-135

(based on 5, 19.50 lbs/ft tube body)

VM-140 DP VM-150 DP VM-165 DP

Grade Yield Ultimate CharpyStrength Strength Impact (ft-lbs)(PSI) Min (PSI) Min Average,

10x7.5 at 4F

Proprietary materials can be manufactured in standard API sizes as wellas unique thin and thick wall configurations with different mechanicalproperties for each option.VAM Drilling encouragesyou to contact your closestVAM Drilling sales office todiscuss engineering specificfit-for-purpose solutions.

VM-140 DP 140,000 150,000 59VM-150 DP 150,000 160,000 44VM-165 DP 165,000 175,000 35

THICK WALL

For drill pipeapplications

For landing stringapplications

Thin wall islight weight,has less T&Dand betterhydraulicperformance

STANDARD WALL THIN WALL

VAM Drilling high-grade materialsare characterized by:

Superior proprietary chemistry; Precise manufacturingprocesses from steel making toheat treatment;

Improved tensile and torsionalstrengths;

Improved fracture toughnessand hardness; and

Lighter pipe bodies.

Sour Service

VAM Drilling offersthree levels of resistanceto Sour Serviceenvironments defined inthe NACE MR-0175-2004industry standard:

MS level: Mild Sour

S level: IntermediateSour

SS level: Severe Sour the SS level is fullycompliant with IRP 1.8requirements

The evolution of drilling programshas driven the industry to developinnovative solutions for extremeconditions such as Sour Serviceenvironments. Here, speciallydesigned drill pipes are essentialto provide the necessary H2Sresistance within the steel and toensure the safety of those workingin such harsh environments.

Vallourec & Mannesmann SourService proprietary grades arerenowned for their performance.This is reflected in the extensiveresearch and development facilities,which are combined with our

internationally recognized expertisein order to produce outstandingcritical service material. Today,VAM Drilling is able to guaranteethe superior performance of itsmaterial in the toughest sourenvironments around the world.

Due to theastringency of thesour environment,particularattention needsto be paid whenselecting and

characterizing adapted SourService steel grades. Controlling

critical manufacturing parametersis also a requirement to ensuresuperior product performance.Steel microstructure, chemicalcomposition, cleanliness and heattreatment process control areessential for high sulfide stresscracking resistance.

Specially designed drill pipes are essential toprovide necessary H2S resistance within the steel.

19

Mechanical parameters essentialfor drilling contractor and operatorsafety include controlled yieldstrength, restricted hardnessand improved fracture toughness.Our vertical integration with theVallourec Group, coupled with ourstrict quality control procedures,enables VAM Drilling to achievesuperior manufacturing parametercontrol and assure our clients ofsafety, reliability, and performance.

Domain 1:Mild Sour Service

00,0001 0,001 0,010,05 psi

pH

H2S partial pressure (psi)0,1 1 10

3,5

4

4,5

5

5,5

6

6,5

7

Domain 0:Non Sour Service

Domain 1:Mild Sour Service

VM-105 DP MS

VM-95 DP SVM-105 DP S VM-95 DP SS

VM-105 DP SSVM-95 DP SSVM-105 DP SS

Domain 2:Intermediate Sour Service

Domain 3:Severe Sour Service

Sour Service Drill Pipe

Sour Service

YS UTS SSCSour MinMax Min Material Threshold NACE SpecificationDomain Technical Name Pipe Part Ksi Ksi Type % SMYS Test Reference

Mild VM-105 DP MSpipe body 105120 115 H2S No

tool joint 120/ 140 API No

VM-95 DP Spipe body 95110 105 H2S 70 Yes

Severetool joint 105120 115 H2S 50 Yes

VM-105 DP Spipe body 105120 115 H2S 70 Yes

tool joint 105120 115 H2S 50 Yes

VM-95 DP SSpipe body 95110 105 H2S 85 Yes

Severetool joint 110125 125 H2S 65 Yes

VM-105 DP SSpipe body 105120 115 H2S 85 Yes

tool joint 110125 125 H2S 65 Yes

SMYS: Specified Minimum Yield Strength YS: Yield Strength UTS: Ultimate Tensile Strength NACE test as per NACE TM0177 Method A Solution A

YS UTS Hardness Min Single Impact SSCSour Technical Min Min Single Max Charpy Test Material Threshold NACEDomain Name Construction Ksi Ksi HRC ft-lb@+20C Type % SMYS Test

Mild VM-65 HW MS Welded65 95 22 24 H2S No

110 140 36 48 H2S No

Mild VM-110 HW MS Integral 110 140 36 48 H2S No


Sour Service Drill Pipe Offer

Our Sour Service drill pipe provides a superior resistanceto H2S as compared to standard grade drill pipe.

Sour Service HWDP Offer: Friction Welded or Integral Machined Bar Solutions

Our Sour Service HWDP is compliant with API specifications and is more resistant toH2S than standard grade HWDP.

Fully compliant with API

VAM Drilling specification

Fully compliant with IRP 1.8

VAM Drilling can maximize safety margins in H2S environments.

21

Toughness EquivalentYS UTS Hardness Min Single SSC

Sour Technical Min Min Single Max Impact Charpy Test Material Threshold NACEDomain Name Construction Ksi Ksi HRC ft-lb@+20C Type % SMYS Test

Severe VM-110 PUP S Integral 110 140 36 48 H2S 50 NoMild Sour Service DC and subs Integral 110 140 36 48 H2S No


Toughness EquivalentYS UTS Hardness Min Single SSC

Sour Technical Product Min Min Single Max Impact Charpy Test Material Threshold NACEDomain Name Type Construction Ksi Ksi HRC ft-lb@+20C Type % SMYS Test

Mild VM-110 HDP MS Hydroclean DP Welded 110 140 36 48 H2S NoMild VM-110 HHW MS Hydroclean HWDP Integral 100 135 36 48 H2S No


Connection API API VAM Express VAM EIS VAM CDS(Tool Joint Grade) (120 ksi) (105 ksi) (105 ksi) (105 ksi) (105 ksi)

Tool Joint OD 6-5/8 6-3/8 6-3/8 6-3/8 6-3/8

ID 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2

Torsional stength (ft-Ibs) 44,500 38,900 63,100 54,700 54,600

Make-up torque (ft-lbs) 26,700 23,300 39,400 32,800 32,800

Sour Service Hydroclean DP and Hydroclean HWDP

Sour Service Hydroclean DP and Hydroclean HWDP are also available.Both are well adapted to mild sour environments, where materials areexposed to low levels of H2S corrosion.

Sour Service DC and Accessories Offer

VAM Drilling can maximize safety margins in H2S environments with SourService drill collars, pup joints and accessories using ERS 425 material.

Sour Service Connections Offer

In extended reach wells, VAM Drilling can propose Sour Servicecompatible high-torque connections. High-torque connections makeup for lower yield strengths which occur in Sour Service grades.

Low-Temperature Grades

content of phosphorus and sulfur andalso a reduced content of inclusionand oxides increases the toleranceto damage and prevents fatiguecrack initiation.

This process control (micro alloyingaddition in the steel and heattreatment control) can successfullylower the transition temperature.Proprietary arctic grades already existfor temperatures as low as 40C.However, for high-strength drill pipe itis necessary to meet the drilling loadsin arctic conditions with temperaturesas low as 60C. VAM Drilling is atthe forefront of developing solutionsfor these types of environments.

Controlling critical manufacturingparameters is the key to reachtop-of-the-range products. Theparameters include:

Steel microstructure;

Chemical composition;

Cleanliness;

Heat treatment; and

Process control.

For further information or torequest special low-grade material,contact your nearest VAM Drillingsales office.

Technical Name VM-135 DP LTWorking Domain Low Temperature

Pipe BodyMinimum Yield Strength 135,000 psiUltimate Tensile Strength 150,000 psiMinimum Elongation API formula 7.3.2Minimum average Charpy Impact Valueat 60C (76F), standard size (7.5 X 10 mm) 60J 44 ft-lbs (100J/cm)

Tool JointMinimum Yield Strength 120,000 psiUltimate Tensile Strength 140,000 psiMinimum Elongation 13%Minimum Hardness 30 HRCMinimum average Charpy Impact Valueat 60C (76F), standard size (10 X 10 mm) 42J 31 ft-lbs (52.5 J/cm)

Weld ZoneMinimum Yield Strength Stronger than the pipe bodyMaximum Hardness 37HRCMinimum average Charpy Impact Valueat 60C (76F), standard size (10 X 10 mm) 42J 31 ft-lbs (52.5 J/cm)

Low-Temperature Grades

Maximizing Safety and

Performance in Low-

Temperature Environments

Arctic drilling is one of the most vividexamples of how the oil and gasindustry is called upon to adapt toever-increasing demand for energyresources. This evolution has driventhe industry to develop more suitabledrill string solutions adapted toextreme conditions, including arcticenvironments.

The need for such drill pipe wastriggered by the wells topology(mainly Eastern Europe, CIS, Alaskaand Canadian markets) where thefracture toughness behavior of drillpipe at temperatures as low as 60C(76F) has to be controlled andguaranteed. The underlying issuebehind this constraint is not relatedto the service temperature of thesetubulars, but instead to potentialdamage during ground transportationand handling in the arctic permafrost.Steel grade ductility decreasesdramatically below a certain temp-erature called transition temperature.The transition temperature is specificto the metallurgy and grade of steel.When the transition temperature ofthe steel grade is too high, the steelcan become brittle even at 20C.Therefore, it is desirable to use steelwith very low transition temperature,which is typically difficult to achievefor high-strength steel. Nevertheless,the transition temperature can beimproved by controlling the way thesteel is manufactured. In particular,the use of carbon steel with a low

Drill PipeDesigned to Go Deep

23

VAM Drilling drill pipe is designed to provide superiortechnical performance and a service lifetime exceedingmost current industry standards. VAM Drilling drill pipeis available with:

Proprietary oversized minimum internal upset (miu),for better fatigue resistance (where applicable);

Longer tool joints, providing a maximum re-cutcapability for longer service life; and

Higher toughness specification on pipe body, weldand tool joint, providing greater safety margins inextreme drilling conditions.

VAM Drilling tool joint forgings meet or exceed APIspecifications and tolerance requirements. Each jointis inspected to guarantee visual and dimensionalproperties, and tested to ensure proper mechanicalcharacteristics. All VAM Drilling tool joint forgings are:

100% thread-gauged;

100% magnetic-particle inspected;

Phos-coated (anti-galling treatment); and

Hardness-tested.

Do not hesitate to contact our sales representativeswith special needs to evaluate feasibility.

One of the most critical sections in welded drill pipe is the transition zone between the tool joint and thepipe body. A smooth, gradual transition linked to the superior nature of the purity of our steel ensuresminimum stress concentration and greatly improves the fatigue life of the pipe.

VAM Drilling Drill Pipe Internal and External Upset Profile

VAM Drilling provides a complete line of drill string products, including a full range of jointed drill pipe in nominalsizes from 2-3/8 to 6-5/8 and in a wide range of wall thicknesses.

TOOL JOINT ID WELD LINE LONG SMOOTHMin TRANSITION

miu Radius

VAM Drilling drill pipe meets orexceeds API 5DP and ISO 11961specifications for the moststringent drilling conditions.

Drill Pipe Manufacturing Flow Chart

Upsetting HeatTreatment

Straightening

Forging HeatTreatment

Threading

Finishing andFinal Inspection

InternalPlastic Coating

(optional)Shipping

PhosCoating

Make-and-Break(optional)

Pipe Body

Tool Joint

25

MagneticParticle

Inspection

Inspection forLongitudinal DefectTransverse Defect

Wall Thickness

Hardbanding(optional)

FlashRemoval

HardnessCheck

Wet MagneticParticle and

Ultrasonic Inspection

FrictionWelding

HeatTreatment

of Weld

MagneticParticle

Inspection

ASSEMBLY

AlignmentInspection

Drill pipe is manufactured to customer requirements and, where applicable, to specificationssuch as API, ISO, NS1, DS1, IRP 1.8, etc. It is inspected 100% after completion.

2-7/8 10.40 E-75 EU 0.362 2.151 11,600 214,000 16,500 16,500 NC31 4-1/8 22-7/8 10.40 E-75 EU 0.362 2.151 11,600 214,000 16,500 16,500 NC31 4-1/8 2-1/8

2-7/8 10.40 X-95 IU 0.362 2.151 14,600 272,000 20,900 20,900 NC26 3-3/8 1-3/42-7/8 10.40 X-95 EU 0.362 2.151 14,600 272,000 20,900 20,900 NC31 4-1/8 2

2-7/8 10.40 G-105 EU 0.362 2.151 16,200 300,000 23,100 23,100 NC31 4-1/8 22-7/8 10.40 G-105 IU 0.362 2.151 16,200 300,000 23,100 23,100 NC26 VAM EIS 3-5/8 1-1/22-7/8 10.40 G-105 IU 0.362 2.151 16,200 300,000 23,100 23,100 NC26 VAM CDS 3-5/8 1-1/22-7/8 10.40 G-105 EU 0.362 2.151 16,200 300,000 23,100 23,100 NC31 VAM EIS 4-1/8 22-7/8 10.40 G-105 EU 0.362 2.151 16,200 300,000 23,100 23,100 NC31 VAM CDS 4-1/8 22-7/8 10.40 G-105 IU 0.362 2.151 16,200 300,000 23,100 23,100 VAM Express VX26 3-1/2 1-1/22-7/8 10.40 G-105 EU 0.362 2.151 16,200 300,000 23,100 23,100 VAM Express VX31 4 2-1/8

2-7/8 10.40 S-135 IU 0.362 2.151 20,800 386,000 29,700 29,700 2-7/8 PAC 3-1/8 1-1/22-7/8 10.40 S-135 EU 0.362 2.151 20,800 386,000 29,700 29,700 NC31 4-3/8 1-5/82-7/8 10.40 S-135 IU 0.362 2.151 20,800 386,000 29,700 29,700 2-7/8 PAC VAM EIS 3-1/8 1-1/22-7/8 10.40 S-135 IU 0.362 2.151 20,800 386,000 29,700 29,700 NC26 VAM EIS 3-5/8 1-1/22-7/8 10.40 S-135 IU 0.362 2.151 20,800 386,000 29,700 29,700 NC26 VAM CDS 3-5/8 1-1/22-7/8 10.40 S-135 IU 0.362 2.151 20,800 386,000 29,700 29,700 VAM Express VX24 3-1/8 1-1/22-7/8 10.40 S-135 IU 0.362 2.151 20,800 386,000 29,700 29,700 VAM Express VX26 3-5/8 1-1/2

Pipe Body Tool Joint

Drill Pipe and Tool Joint Data

NominalSize

in

Weight

ft-lbs

Grade UpsetWall

Thickness

in

ID

in

TorsionalStrength

ft-lbs

TensileStrength

lbs

Collapse

psi

Burst

psi

Connection OD

in

ID

in

Notes: All drill pipes are Range 2 (31-1/2 ft shoulder to shoulder) unless otherwise specified.API recommends a torsional ratio of 0.80 or greater.VAM EIS, VAM CDSand VAM Express are proprietary threads of VAM Drilling.Tong spaces are a minimum of 2 longer than API standard.Make-up torque values are recommended by VAM Drilling.

27

9 11 120 7,890 13,200 496,000 1.14 11.39 359 0.19 0.36 0.17 3-27/32 4,970 2-7/89 11 120 7,070 11,800 447,000 1.02 11.25 354 0.19 0.36 0.17 3-27/32 4,970 2-7/8

9 10 120 4,130 6,880 314,000 0.47 10.63 335 0.18 0.34 0.16 3-3/8 4,130 2-7/89 11 120 7,890 13,200 496,000 0.90 11.39 359 0.19 0.36 0.17 3-29/32 5,730 2-7/8

9 11 120 7,890 13,200 496,000 0.81 11.39 359 0.19 0.36 0.17 3-15/16 6,110 2-7/89 10 130 8,180 13,600 423,000 0.84 11.10 350 0.18 0.35 0.17 3-5/16 6,160 2-7/89 10 130 8,320 13,900 423,000 0.86 11.10 350 0.18 0.35 0.17 3-5/16 6,350 2-7/89 11 130 11,800 19,600 537,000 1.21 11.39 359 0.19 0.36 0.17 3-27/32 8,580 2-7/89 11 130 11,800 19,700 537,000 1.22 11.39 359 0.19 0.36 0.17 3-27/32 8,660 2-7/811 12 130 9,040 15,100 427,000 0.93 11.15 351 0.18 0.35 0.17 3-1/4 6,490 2-7/811 13 130 11,600 19,400 489,000 1.20 11.31 356 0.19 0.36 0.17 3-3/4 8,270 2-7/8

9 11 120 3,420 5,690 273,000 0.27 10.63 335 0.18 0.34 0.16 3-1/8 3,420 2-7/89 11 120 10,100 16,800 624,000 0.81 12.12 382 0.18 0.37 0.19 4-1/16 7,690 2-7/89 11 130 5,720 9,530 296,000 0.46 10.63 335 0.18 0.34 0.16 3-1/8 5,720 2-7/89 10 130 8,180 13,600 423,000 0.66 11.10 350 0.18 0.35 0.17 3-15/32 7,730 2-7/89 10 130 8,320 13,900 423,000 0.67 11.10 350 0.18 0.35 0.17 3-15/32 7,920 2-7/811 12 130 5,780 9,630 309,000 0.46 10.71 337 0.18 0.34 0.16 3-1/8 5,780 2-7/811 12 130 9,040 15,100 427,000 0.72 11.31 356 0.18 0.35 0.17 3-3/8 7,730 2-7/8

Tool Joint Assembly

2-7/8

NominalSize

in

TorsionalStrength

ft-lbs

Make-upTorque

ft-lbs

TensileStrength

lbsBoxin

MaterialYield

Strengthksi

Pinin

Tong LengthClosedEndgal/ft

OpenEndgal/ft

TorsionalRatio

ApproxWt/foot

lbs/ft

ApproxWeight

lbs

DisplacementOD

in

Make-up

ft-lbs

Capacity

gal/ft

Premium

3-1/2 13.30 E-75 EU 0.368 2.764 18,600 272,000 14,100 13,800 NC38 4-3/4 2-11/163-1/2 13.30 E-75 IU 0.368 2.764 18,600 272,000 14,100 13,800 NC31 VAM EIS 4-1/8 23-1/2 13.30 E-75 IU 0.368 2.764 18,600 272,000 14,100 13,800 NC31 VAM CDS 4-1/8 2

3-1/2 13.30 X-95 EU 0.368 2.764 23,500 344,000 17,900 17,500 NC38 5 2-9/163-1/2 13.30 X-95 EU 0.368 2.764 23,500 344,000 17,900 17,500 NC40 5-1/4 2-9/163-1/2 13.30 X-95 IU 0.368 2.764 23,500 344,000 17,900 17,500 NC31 VAM EIS 4-1/8 23-1/2 13.30 X-95 IU 0.368 2.764 23,500 344,000 17,900 17,500 NC31 VAM CDS 4-1/8 23-1/2 13.30 X-95 EU 0.368 2.764 23,500 344,000 17,900 17,500 NC38 VAM EIS 4-3/4 2-9/163-1/2 13.30 X-95 EU 0.368 2.764 23,500 344,000 17,900 17,500 NC38 VAM CDS 4-3/4 2-9/163-1/2 13.30 X-95 IU 0.368 2.764 23,500 344,000 17,900 17,500 VAM Express VX31 4-1/8 23-1/2 13.30 X-95 EU 0.368 2.764 23,500 344,000 17,900 17,500 VAM Express VX38 4-3/4 2-11/16

3-1/2 13.30 G-105 EU 0.368 2.764 26,000 380,000 19,800 19,300 NC38 5 2-1/83-1/2 13.30 G-105 EU 0.368 2.764 26,000 380,000 19,800 19,300 NC40 5-1/4 2-9/163-1/2 13.30 G-105 EU 0.368 2.764 26,000 380,000 19,800 19,300 NC38 VAM EIS 4-7/8 2-9/163-1/2 13.30 G-105 EU 0.368 2.764 26,000 380,000 19,800 19,300 NC38 VAM CDS 4-7/8 2-9/163-1/2 13.30 G-105 IU 0.368 2.764 26,000 380,000 19,800 19,300 VAM Express VX31 4-1/8 23-1/2 13.30 G-105 EU 0.368 2.764 26,000 380,000 19,800 19,300 VAM Express VX38 4-3/4 2-11/16

3-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 NC38 5 2-1/83-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 NC40 5-1/4 2-9/163-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 NC38 VAM EIS 4-7/8 2-9/163-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 NC38 VAM CDS 4-7/8 2-9/163-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 NC40 VAM EIS 5-1/4 2-9/163-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 NC40 VAM CDS 5-1/4 2-9/163-1/2 13.30 S-135 EU 0.368 2.764 33,400 489,000 25,400 24,800 VAM Express VX38 4-3/4 2-9/16

3-1/2 15.50 E-75 EU 0.449 2.602 21,100 323,000 16,800 16,800 NC38 5 2-9/163-1/2 15.50 E-75 IU 0.449 2.602 21,100 323,000 16,800 16,800 NC31 VAM EIS 4-1/4 23-1/2 15.50 E-75 IU 0.449 2.602 21,100 323,000 16,800 16,800 NC31 VAM CDS 4-1/4 23-1/2 15.50 E-75 IU 0.449 2.602 21,100 323,000 16,800 16,800 VAM Express VX31 4-1/8 23-1/2 15.50 E-75 EU 0.449 2.602 21,100 323,000 16,800 16,800 VAM Express VX38 4-3/4 2-9/16

3-1/2 15.50 X-95 EU 0.449 2.602 26,700 409,000 21,200 21,300 NC38 5 2-7/163-1/2 15.50 X-95 EU 0.449 2.602 26,700 409,000 21,200 21,300 NC40 5-1/4 2-9/163-1/2 15.50 X-95 EU 0.449 2.602 26,700 409,000 21,200 21,300 NC38 VAM EIS 4-7/8 2-9/163-1/2 15.50 X-95 EU 0.449 2.602 26,700 409,000 21,200 21,300 NC38 VAM EIS 4-3/4 2-9/163-1/2 15.50 X-95 EU 0.449 2.602 26,700 409,000 21,200 21,300 NC38 VAM CDS 4-3/4 2-9/163-1/2 15.50 X-95 EU 0.449 2.602 26,700 409,000 21,200 21,300 VAM Express VX38 4-3/4 2-9/16

3-1/2 15.50 G-105 EU 0.449 2.602 29,500 452,000 23,500 23,600 NC38 5 2-1/83-1/2 15.50 G-105 EU 0.449 2.602 29,500 452,000 23,500 23,600 NC40 5-1/4 2-9/163-1/2 15.50 G-105 EU 0.449 2.602 29,500 452,000 23,500 23,600 NC38 VAM EIS 4-3/4 2-9/163-1/2 15.50 G-105 EU 0.449 2.602 29,500 452,000 23,500 23,600 NC38 VAM CDS 4-3/4 2-9/163-1/2 15.50 G-105 EU 0.449 2.602 29,500 452,000 23,500 23,600 VAM Express VX38 4-3/4 2-9/16

3-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 NC40 5-1/2 2-1/43-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 NC38 VAM EIS 5 2-7/163-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 NC38 VAM CDS 5 2-7/163-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 NC40 VAM EIS 5-1/4 2-7/163-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 NC40 VAM CDS 5-1/4 2-7/163-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 VAM Express VX38 4-3/4 2-7/163-1/2 15.50 S-135 EU 0.449 2.602 38,000 581,000 30,200 30,300 VAM Express VX38 4-7/8 2-7/16



Pipe Body Tool JointNominalSize

in

Weight

ft-lbs

Grade UpsetWall

Thickness

in

ID

in

TorsionalStrength

ft-lbs

TensileStrength

lbs

Collapse

psi

Burst

psi

Connection OD

in

ID

in

29

10 12-1/2 120 10,800 18,100 587,000 0.97 14.44 455 0.31 0.53 0.22 4-1/2 7,270 3-1/29 11 130 11,800 19,600 537,000 1.06 14.12 445 0.30 0.51 0.22 3-27/32 8,580 3-1/29 11 130 11,800 19,700 537,000 1.06 14.12 445 0.30 0.51 0.22 3-27/32 8,660 3-1/2

10 12-1/2 120 12,100 20,100 649,000 0.86 15.07 475 0.31 0.54 0.23 4-19/32 8,820 3-1/29 12 120 16,600 27,700 838,000 1.18 15.36 484 0.31 0.54 0.23 4-27/32 9,600 3-1/29 11 130 11,800 19,600 537,000 0.84 14.12 445 0.30 0.51 0.22 3-7/8 8,990 3-1/29 11 130 11,800 19,700 537,000 0.84 14.12 445 0.30 0.51 0.22 3-7/8 9,070 3-1/210 12-1/2 130 17,000 28,300 703,000 1.21 14.63 461 0.31 0.53 0.22 4-15/32 11,900 3-1/210 12-1/2 130 17,100 28,500 703,000 1.21 14.63 461 0.31 0.53 0.22 4-15/32 12,000 3-1/211 13 130 13,300 22,200 542,000 0.94 14.36 452 0.30 0.51 0.22 3-3/4 8,970 3-1/212 15 130 17,200 28,600 626,000 1.22 14.78 466 0.31 0.54 0.23 4-3/8 11,800 3-1/2

10 12-1/2 120 15,900 26,500 842,000 1.02 15.68 494 0.30 0.54 0.24 4-21/32 9,880 3-1/29 12 120 16,600 27,700 838,000 1.07 15.36 484 0.31 0.54 0.23 4-7/8 10,200 3-1/210 12-1/2 130 17,700 29,400 703,000 1.13 14.85 468 0.31 0.53 0.23 4-15/32 11,900 3-1/210 12-1/2 130 17,700 29,500 703,000 1.13 14.85 468 0.31 0.53 0.23 4-15/32 12,000 3-1/211 13 130 13,300 22,200 542,000 0.85 14.36 452 0.30 0.51 0.22 3-13/16 9,780 3-1/212 15 130 17,200 28,600 626,000 1.10 14.78 466 0.31 0.54 0.23 4-3/8 11,800 3-1/2

10 12-1/2 120 15,900 26,500 842,000 0.79 15.68 494 0.30 0.54 0.24 4-13/16 12,600 3-1/29 12 120 16,600 27,700 838,000 0.83 15.36 484 0.31 0.54 0.23 5 12,600 3-1/210 12-1/2 130 17,700 29,400 703,000 0.88 14.85 468 0.31 0.53 0.23 4-17/32 13,000 3-1/210 12-1/2 130 17,700 29,500 703,000 0.88 14.85 468 0.31 0.53 0.23 4-1/2 12,500 3-1/29 12 130 24,700 41,100 908,000 1.23 15.36 484 0.31 0.54 0.23 4-27/32 17,000 3-1/29 12 130 24,700 41,200 908,000 1.23 15.36 484 0.31 0.54 0.23 4-27/32 17,100 3-1/212 15 130 19,500 32,600 693,000 0.98 14.99 472 0.31 0.54 0.23 4-3/8 12,900 3-1/2

10 12-1/2 120 12,100 20,100 649,000 0.95 17.13 540 0.28 0.54 0.26 4-17/32 7,790 3-1/29 11 130 11,800 19,700 537,000 0.94 16.37 516 0.26 0.51 0.25 3-27/32 8,580 3-1/29 11 130 11,800 19,700 537,000 0.94 16.37 516 0.26 0.51 0.25 3-27/32 8,660 3-1/211 13 130 13,300 22,200 542,000 1.05 16.42 517 0.26 0.51 0.25 3-3/4 8,970 3-1/212 15 130 19,500 32,600 693,000 1.54 17.03 537 0.28 0.54 0.26 4-3/8 12,900 3-1/2

10 12-1/2 120 13,200 22,000 708,000 0.83 17.32 546 0.27 0.54 0.26 4-21/32 9,880 3-1/29 12 120 16,600 27,700 838,000 1.04 17.43 549 0.28 0.54 0.27 4-7/8 10,200 3-1/210 12-1/2 130 17,700 29,400 703,000 1.10 16.91 533 0.28 0.53 0.26 4-15/32 11,900 3-1/210 12-1/2 130 17,000 28,300 703,000 1.06 16.70 526 0.28 0.53 0.26 4-15/32 11,900 3-1/210 12-1/2 130 17,100 28,500 703,000 1.07 16.70 526 0.28 0.53 0.26 4-15/32 12,000 3-1/212 15 130 19,500 32,600 693,000 1.22 17.03 537 0.28 0.54 0.26 4-3/8 12,900 3-1/2

10 12-1/2 120 15,900 26,500 842,000 0.90 17.74 559 0.27 0.54 0.27 4-23/32 11,000 3-1/29 12 120 16,600 27,700 838,000 0.94 17.43 549 0.28 0.54 0.27 4-15/16 11,400 3-1/210 12-1/2 130 17,000 28,300 703,000 0.96 16.70 526 0.28 0.53 0.26 4-15/32 11,900 3-1/210 12-1/2 130 17,100 28,500 703,000 0.96 16.70 526 0.28 0.53 0.26 4-15/32 12,000 3-1/212 15 130 19,500 32,600 693,000 1.10 17.03 537 0.28 0.54 0.26 4-3/8 12,900 3-1/2

9 12 120 19,600 32,700 980,000 0.86 18.34 578 0.27 0.55 0.28 5-3/32 14,400 3-1/210 12-1/2 130 19,900 33,200 767,000 0.88 17.32 546 0.27 0.54 0.26 4-9/16 14,500 3-1/210 12-1/2 130 19,900 33,200 767,000 0.87 17.32 546 0.27 0.54 0.26 4-17/32 14,000 3-1/29 12 130 26,700 44,500 972,000 1.17 17.61 555 0.27 0.54 0.27 4-27/32 18,000 3-1/29 12 130 26,300 43,800 972,000 1.16 17.61 555 0.27 0.54 0.27 4-27/32 17,600 3-1/212 15 130 20,800 34,600 757,000 0.91 17.24 543 0.27 0.54 0.26 4-13/32 14,400 3-1/212 15 130 21,800 36,300 757,000 0.96 17.49 551 0.27 0.54 0.27 4-13/32 14,400 3-1/2

3-1/2Tool Joint Assembly

NominalSize

in

TorsionalStrength

ft-lbs

Make-upTorque

ft-lbs

TensileStrength

lbsBoxin

MaterialYield

Strengthksi

Pinin


OpenEndgal/ft

TorsionalRatio

ApproxWt/foot

lbs/ft

ApproxWeight

lbs

DisplacementOD

in

Make-up

ft-lbs

Capacity

gal/ft

Premium

4 14.00 E-75 IU 0.330 3.340 23,300 285,000 11,400 10,800 NC38 5 2-7/164 14.00 E-75 IU 0.330 3.340 23,300 285,000 11,400 10,800 NC40 5-1/4 2-11/164 14.00 E-75 IU 0.330 3.340 23,300 285,000 11,400 10,800 NC38 VAM EIS 4-3/4 2-9/164 14.00 E-75 IU 0.330 3.340 23,300 285,000 11,400 10,800 NC38 VAM CDS 4-3/4 2-9/164 14.00 E-75 IU 0.330 3.340 23,300 285,000 11,400 10,800 VAM Express VX38 4-3/4 2-11/16

4 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 NC38 5 2-7/164 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 NC40 5-1/4 2-11/164 14.00 X-95 EU 0.330 3.340 29,500 361,000 14,400 13,700 NC46 6 3-1/44 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 NC38 VAM EIS 4-7/8 2-9/164 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 NC38 VAM CDS 4-7/8 2-9/164 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 NC40 VAM CDS 5-1/4 2-11/164 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 VAM Express VX38 4-7/8 2-9/164 14.00 X-95 IU 0.330 3.340 29,500 361,000 14,400 13,700 VAM Express VX39 4-7/8 2-13/16

4 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 NC40 5-1/2 2-7/164 14.00 G-105 EU 0.330 3.340 32,600 400,000 15,900 15,200 NC46 6 3-1/44 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 NC38 VAM EIS 5 2-7/164 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 NC38 VAM CDS 5 2-7/164 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 NC40 VAM EIS 5-1/4 2-9/164 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 NC40 VAM CDS 5-1/4 2-9/164 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 VAM Express VX38 4-7/8 2-9/164 14.00 G-105 IU 0.330 3.340 32,600 400,000 15,900 15,200 VAM Express VX39 5 2-13/16

4 14.00 S-135 EU 0.330 3.340 41,900 514,000 20,100 19,500 NC46 6 3 9 14 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 NC38 VAM EIS 5 2-7/164 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 NC38 VAM CDS 5 2-7/164 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 NC40 VAM EIS 5-1/4 2-9/164 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 NC40 VAM CDS 5-1/4 2-9/164 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 VAM Express VX38 5 2-7/164 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 VAM Express VX39 5 2-11/164 14.00 S-135 IU 0.330 3.340 41,900 514,000 20,100 19,500 VAM Express VX40 5-1/4 3

4 15.70 E-75 IU 0.380 3.240 25,800 324,000 12,900 12,500 NC38 5 2-7/164 15.70 E-75 IU 0.380 3.240 25,800 324,000 12,900 12,500 NC40 5-1/4 2-11/164 15.70 E-75 IU 0.380 3.240 25,800 324,000 12,900 12,500 NC38 VAM EIS 4-7/8 2-9/164 15.70 E-75 IU 0.380 3.240 25,800 324,000 12,900 12,500 NC38 VAM CDS 4-7/8 2-9/164 15.70 E-75 IU 0.380 3.240 25,800 324,000 12,900 12,500 VAM Express VX38 4-3/4 2-11/16

4 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 NC40 5-1/2 2-7/164 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 NC38 VAM EIS 4-7/8 2-9/164 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 NC38 VAM CDS 4-7/8 2-9/164 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 NC40 VAM EIS 5-1/4 2-9/164 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 NC40 VAM CDS 5-1/4 2-9/164 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 VAM Express VX38 4-7/8 2-9/164 15.70 X-95 IU 0.380 3.240 32,700 411,000 16,300 15,800 VAM Express VX39 5 2-11/16

4 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 NC40 5-1/2 2-7/164 15.70 G-105 EU 0.380 3.240 36,100 454,000 18,100 17,500 NC46 6 3 9 14 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 NC38 VAM EIS 5 2-7/164 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 NC38 VAM CDS 5 2-7/164 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 NC40 VAM EIS 5-1/4 2-9/164 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 NC40 VAM CDS 5-1/4 2-9/164 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 VAM Express VX38 5 2-7/164 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 VAM Express VX39 5 2-11/164 15.70 G-105 IU 0.380 3.240 36,100 454,000 18,100 17,500 VAM Express VX40 5-1/4 3

4 15.70 S-135 EU 0.380 3.240 46,500 583,000 23,200 22,400 NC46 6 3 9 14 15.70 S-135 IU 0.380 3.240 46,500 583,000 23,200 22,400 NC40 VAM EIS 5-1/4 2-9/164 15.70 S-135 IU 0.380 3.240 46,500 583,000 23,200 22,400 NC40 VAM CDS 5-1/4 2-9/164 15.70 S-135 IU 0.380 3.240 46,500 583,000 23,200 22,400 VAM Express VX39 5 2-11/164 15.70 S-135 IU 0.380 3.240 46,500 583,000 23,200 22,400 VAM Express VX40 5-1/2 2-11/16


Notes: All drill pipes are Range 2 (31-1/2 ft shoulder to shoulder) unless otherwise specified. API recommends a torsional ratio of 0.80 or greater.VAM EIS, VAM CDSand VAM Express are proprietary threads of VAM Drilling. Tong spaces are a minimum of 2 longer than API standard.Make-up torque values are recommended by VAM Drilling.


in

Weight

ft-lbs

Grade UpsetWall

Thickness

in

ID

in

TorsionalStrength

ft-lbs

TensileStrength

lbs

Collapse

psi

Burst

psi

Connection OD

in

ID

in

31

10 12-1/2 120 13,200 22,000 708,000 0.95 16.11 507 0.43 0.68 0.25 4-19/32 8,820 49 12 120 15,300 25,500 776,000 1.10 16.03 505 0.44 0.68 0.24 4-27/32 9,600 410 12-1/2 130 17,000 28,300 703,000 1.22 15.49 488 0.43 0.67 0.24 4-15/32 11,900 410 12-1/2 130 17,100 28,500 703,000 1.22 15.49 488 0.43 0.67 0.24 4-15/32 12,000 412 15 130 17,200 28,600 626,000 1.23 15.63 492 0.44 0.67 0.24 4-3/8 11,800 4

10 12-1/2 120 13,200 22,000 708,000 0.75 16.11 507 0.43 0.68 0.25 4-3/4 11,500 49 12 120 15,300 25,500 776,000 0.87 16.03 505 0.44 0.68 0.24 4-15/16 11,400 49 12 120 19,900 33,200 901,000 1.13 16.79 529 0.45 0.71 0.26 5-13/32 12,100 410 12-1/2 130 17,700 29,400 703,000 1.00 15.70 495 0.43 0.67 0.24 4-15/32 11,900 410 12-1/2 130 17,700 29,500 703,000 1.00 15.70 495 0.43 0.67 0.24 4-15/32 12,000 49 12 130 22,300 37,100 841,000 1.26 16.03 505 0.44 0.68 0.24 4-27/32 16,100 412 15 130 19,500 32,600 693,000 1.10 16.10 507 0.43 0.68 0.25 4-3/8 12,900 412 15 130 20,100 33,500 713,000 1.13 15.66 493 0.44 0.68 0.24 4-9/16 13,900 4

9 12 120 17,900 29,800 897,000 0.91 16.87 531 0.43 0.69 0.26 5 12,600 49 12 120 19,900 33,200 901,000 1.02 16.79 529 0.45 0.71 0.26 5-7/16 12,800 410 12-1/2 130 19,900 33,200 767,000 1.02 16.11 507 0.43 0.68 0.25 4-15/32 12,800 410 12-1/2 130 19,900 33,200 767,000 1.02 16.11 507 0.43 0.68 0.25 4-15/32 12,900 49 12 130 24,700 41,100 908,000 1.26 16.22 511 0.44 0.68 0.25 4-27/32 17,000 49 12 130 24,700 41,200 908,000 1.26 16.22 511 0.44 0.68 0.25 4-27/32 17,100 412 15 130 19,500 32,600 693,000 1.00 16.10 507 0.43 0.68 0.25 4-3/8 12,900 412 15 130 21,300 35,500 713,000 1.09 15.92 502 0.44 0.68 0.24 4-9/16 13,900 4

9 12 120 23,400 39,000 1,050,000 0.93 17.24 543 0.45 0.71 0.26 5-9/16 15,800 410 12-1/2 130 19,900 33,200 767,000 0.79 16.11 507 0.43 0.68 0.25 4-21/32 16,200 410 12-1/2 130 19,900 33,200 767,000 0.79 16.11 507 0.43 0.68 0.25 4-21/32 16,300 49 12 130 24,700 41,100 908,000 0.98 16.22 511 0.44 0.68 0.25 4-27/32 17,000 49 12 130 24,700 41,200 908,000 0.98 16.22 511 0.44 0.68 0.25 4-27/32 17,100 412 15 130 21,800 36,300 757,000 0.87 16.56 522 0.43 0.68 0.25 4-1/2 16,100 412 15 130 23,900 39,800 783,000 0.95 16.14 509 0.44 0.68 0.25 4-5/8 16,300 411 14 130 25,400 42,300 818,000 1.01 15.91 501 0.44 0.69 0.24 4-31/32 19,000 4

10 12-1/2 120 13,200 22,000 708,000 0.85 17.67 557 0.41 0.68 0.27 4-21/32 9,880 49 12 120 15,300 25,500 776,000 0.99 17.60 554 0.41 0.68 0.27 4-7/8 10,200 410 12-1/2 130 17,700 29,400 703,000 1.14 17.27 544 0.41 0.67 0.26 4-15/32 11,900 410 12-1/2 130 17,700 29,500 703,000 1.14 17.27 544 0.41 0.67 0.26 4-15/32 12,000 412 15 130 17,200 28,600 626,000 1.11 17.18 541 0.41 0.67 0.26 4-3/8 11,800 4

9 12 120 17,900 29,800 897,000 0.91 18.44 581 0.41 0.69 0.28 5 12,600 410 12-1/2 130 17,700 29,400 703,000 0.90 17.27 544 0.41 0.67 0.26 4-1/2 12,400 410 12-1/2 130 17,700 29,500 703,000 0.90 17.27 544 0.41 0.67 0.26 4-1/2 12,500 49 12 130 24,700 41,100 908,000 1.26 17.79 560 0.41 0.68 0.27 4-27/32 17,000 49 12 130 24,700 41,200 908,000 1.26 17.79 560 0.41 0.68 0.27 4-27/32 17,100 412 15 130 19,500 32,600 693,000 1.00 17.64 556 0.41 0.68 0.27 4-3/8 12,900 412 15 130 23,900 39,800 783,000 1.22 17.69 557 0.41 0.68 0.27 4-9/16 15,100 4

9 12 120 17,900 29,800 897,000 0.82 18.44 581 0.41 0.69 0.28 5-1/16 13,800 49 12 120 23,400 39,000 1,050,000 1.08 18.81 592 0.42 0.71 0.29 5-15/32 13,500 410 12-1/2 130 19,900 33,200 767,000 0.92 17.67 557 0.41 0.68 0.27 4-17/32 13,900 410 12-1/2 130 19,900 33,200 767,000 0.92 17.67 557 0.41 0.68 0.27 4-17/32 14,000 49 12 130 24,700 41,100 908,000 1.14 17.79 560 0.41 0.68 0.27 4-27/32 17,000 49 12 130 24,700 41,200 908,000 1.14 17.79 560 0.41 0.68 0.27 4-27/32 17,100 412 15 130 21,800 36,300 757,000 1.01 18.10 570 0.41 0.68 0.28 4-3/8 13,900 412 15 130 23,900 39,800 783,000 1.10 17.69 557 0.41 0.68 0.27 4-9/16 15,100 411 14 130 25,400 42,300 818,000 1.17 17.46 550 0.42 0.69 0.27 4-31/32 19,000 4

9 12 120 23,400 39,000 1,050,000 0.84 18.81 592 0.42 0.71 0.29 5-21/32 18,100 49 12 130 24,700 41,100 908,000 0.89 17.79 560 0.41 0.68 0.27 4-7/8 17,700 49 12 130 24,700 41,200 908,000 0.89 17.79 560 0.41 0.68 0.27 4-7/8 17,700 412 15 130 23,900 39,800 783,000 0.86 17.69 557 0.41 0.68 0.27 4-11/16 17,500 411 14 130 32,100 53,600 1,000,000 1.15 18.56 585 0.41 0.70 0.28 4-31/32 21,500 4

4Tool Joint Assembly

NominalSize

in

TorsionalStrength

ft-lbs

Make-upTorque

ft-lbs

TensileStrength

lbsBoxin

MaterialYield

Strengthksi

Pinin


OpenEndgal/ft

TorsionalRatio

ApproxWt/foot

lbs/ft

ApproxWeight

lbs

DisplacementOD

in

Make-up

ft-lbs

Capacity

gal/ft

Premium

4-1/2 16.60 E-75 IEU 0.337 3.826 30,800 331,000 10,400 9,830 NC46 6-1/4 34-1/2 16.60 E-75 IEU 0.337 3.826 30,800 331,000 10,400 9,830 NC46 6-1/4 3-1/44-1/2 16.60 E-75 EU 0.337 3.826 30,800 331,000 10,400 9,830 NC50 6-3/8 3-3/44-1/2 16.60 E-75 IEU 0.337 3.826 30,800 331,000 10,400 9,830 NC40 VAM CDS 5-1/4 2-11/16

4-1/2 16.60 X-95 IEU 0.337 3.826 39,000 419,000 12,800 12,500 NC46 6-1/4 34-1/2 16.60 X-95 EU 0.337 3.826 39,000 419,000 12,800 12,500 NC50 6-3/8 3-3/44-1/2 16.60 X-95 EU 0.337 3.826 39,000 419,000 12,800 12,500 NC50 6-5/8 3-3/4

4-1/2 16.60 G-105 IEU 0.337 3.826 43,100 463,000 13,800 13,800 NC46 6-1/4 34-1/2 16.60 G-105 EU 0.337 3.826 43,100 463,000 13,800 13,800 NC50 6-3/8 3-3/44-1/2 16.60 G-105 IEU 0.337 3.826 43,100 463,000 13,800 13,800 NC46 VAM EIS 6 3 9 14-1/2 16.60 G-105 IEU 0.337 3.826 43,100 463,000 13,800 13,800 NC46 VAM CDS 6 3 9 14-1/2 16.60 G-105 IEU 0.337 3.826 43,100 463,000 13,800 13,800 VAM Express VX46 6 3-3/4

4-1/2 16.60 S-135 IEU 0.337 3.826 55,500 595,000 16,800 17,700 NC46 6-1/4 2-3/44-1/2 16.60 S-135 EU 0.337 3.826 55,500 595,000 16,800 17,700 NC50 6-5/8 3-1/24-1/2 16.60 S-135 IEU 0.337 3.826 55,500 595,000 16,800 17,700 NC46 VAM EIS 6 3 9 14-1/2 16.60 S-135 IEU 0.337 3.826 55,500 595,000 16,800 17,700 NC46 VAM CDS 6 3 9 14-1/2 16.60 S-135 EU 0.337 3.826 55,500 595,000 16,800 17,700 NC50 VAM EIS 6-3/8 3-1/24-1/2 16.60 S-135 EU 0.337 3.826 55,500 595,000 16,800 17,700 NC50 VAM CDS 6-3/8 3-1/24-1/2 16.60 S-135 IEU 0.337 3.826 55,500 595,000 16,800 17,700 VAM Express VX46 6 3-1/2

4-1/2 20.00 E-75 IEU 0.430 3.640 36,900 412,000 13,000 12,500 NC46 6-1/4 34-1/2 20.00 E-75 EU 0.430 3.640 36,900 412,000 13,000 12,500 NC50 6-3/8 3-3/4

4-1/2 20.00 X-95 IEU 0.430 3.640 46,700 522,000 16,400 15,900 NC46 6-1/4 2-3/44-1/2 20.00 X-95 EU 0.430 3.640 46,700 522,000 16,400 15,900 NC50 6-3/8 3-1/2

4-1/2 20.00 G-105 EU 0.430 3.640 51,700 577,000 18,100 17,600 NC50 6-5/8 3-1/44-1/2 20.00 G-105 IEU 0.430 3.640 51,700 577,000 18,100 17,600 NC46 VAM EIS 6 3 9 14-1/2 20.00 G-105 IEU 0.430 3.640 51,700 577,000 18,100 17,600 NC46 VAM CDS 6 3 9 14-1/2 20.00 G-105 IEU 0.430 3.640 51,700 577,000 18,100 17,600 VAM Express VX46 6 3-1/2

4-1/2 20.00 S-135 IEU 0.430 3.640 66,400 742,000 23,300 22,600 NC46 6-1/4 2-3/44-1/2 20.00 S-135 EU 0.430 3.640 66,400 742,000 23,300 22,600 NC50 6-5/8 34-1/2 20.00 S-135 IEU 0.430 3.640 66,400 742,000 23,300 22,600 NC46 VAM EIS 6 3 9 14-1/2 20.00 S-135 IEU 0.430 3.640 66,400 742,000 23,300 22,600 NC46 VAM CDS 6 3 9 14-1/2 20.00 S-135 EU 0.430 3.640 66,400 742,000 23,300 22,600 NC50 VAM EIS 6-3/8 3-1/24-1/2 20.00 S-135 EU 0.430 3.640 66,400 742,000 23,300 22,600 NC50 VAM CDS 6-3/8 3-1/24-1/2 20.00 S-135 IEU 0.430 3.640 66,400 742,000 23,300 22,600 VAM Express VX46 6 3 14-1/2 20.00 S-135 IEU 0.430 3.640 66,400 742,000 23,300 22,600 VAM Express VX46 6-1/4 3




in

Weight

ft-lbs

Grade UpsetWall

Thickness

in

ID

in

TorsionalStrength

ft-lbs

TensileStrength

lbs

Collapse

psi

Burst

psi

Connection OD

in

ID

in

33

9 12 120 23,400 39,000 1,050,000 1.27 19.85 625 0.57 0.88 0.30 5-13/32 12,100 4-1/29 12 120 19,900 33,200 901,000 1.08 19.39 611 0.58 0.88 0.30 5-13/32 12,100 4-1/29 12 120 22,400 37,300 939,000 1.21 18.93 596 0.59 0.88 0.29 5-13/16 14,100 4-1/29 12 130 22,300 37,100 841,000 1.20 18.34 578 0.57 0.85 0.28 4-27/32 16,100 4-1/2

9 12 120 23,400 39,000 1,050,000 1.00 19.85 625 0.57 0.88 0.30 5-17/32 15,000 4-1/29 12 120 22,400 37,300 939,000 0.96 18.93 596 0.59 0.88 0.29 5-27/32 14,900 4-1/29 12 120 22,400 37,300 939,000 0.96 19.50 614 0.59 0.89 0.30 5-27/32 14,900 4-1/2

9 12 120 23,400 39,000 1,050,000 0.90 19.85 625 0.57 0.88 0.30 5-19/32 16,500 4-1/29 12 120 22,400 37,300 939,000 0.86 18.93 596 0.59 0.88 0.29 5-29/32 16,600 4-1/29 12 130 35,900 59,800 1,140,000 1.39 19.30 608 0.57 0.87 0.29 5-13/32 23,400 4-1/29 12 130 35,800 59,700 1,140,000 1.38 19.30 608 0.57 0.87 0.29 5-13/32 23,600 4-1/211 14 130 31,600 50,700 923,000 1.18 18.30 576 0.59 0.87 0.28 5-5/8 22,800 4-1/2

9 12 120 26,600 44,400 1,180,000 0.80 20.27 638 0.57 0.88 0.31 5-25/32 21,200 4-1/29 12 120 26,700 44,500 1,110,000 0.80 20.03 631 0.59 0.89 0.31 6-1/16 21,000 4-1/29 12 130 35,900 59,800 1,140,000 1.08 19.30 608 0.57 0.87 0.29 5-13/32 23,400 4-1/29 12 130 35,800 59,700 1,140,000 1.08 19.30 608 0.57 0.87 0.29 5-13/32 23,600 4-1/29 12 130 40,600 67,700 1,200,000 1.22 19.45 613 0.59 0.88 0.30 5-13/16 26,800 4-1/29 12 130 40,600 67,700 1,200,000 1.22 19.45 613 0.59 0.88 0.30 5-13/16 26,900 4-1/211 14 130 37,600 60,200 1,110,000 1.09 18.87 594 0.59 0.87 0.29 5-5/8 26,600 4-1/2

9 12 120 23,400 39,000 1,050,000 1.06 23.15 729 0.52 0.88 0.35 5-1/2 14,300 4-1/29 12 120 22,400 37,300 939,000 1.01 22.23 700 0.54 0.88 0.34 5-13/16 14,100 4-1/2

9 12 120 26,600 44,400 1,180,000 0.95 23.57 742 0.52 0.88 0.36 5-21/32 18,100 4-1/29 12 120 26,700 44,500 1,110,000 0.95 22.76 717 0.54 0.88 0.35 5-15/16 17,500 4-1/2

9 12 120 30,700 51,200 1,270,000 0.99 23.83 751 0.53 0.89 0.36 6-1/32 20,100 4-1/29 12 130 35,900 59,800 1,140,000 1.16 22.61 712 0.52 0.87 0.35 5-13/32 23,400 4-1/29 12 130 35,800 59,700 1,140,000 1.16 22.61 712 0.52 0.87 0.35 5-13/32 23,600 4-1/211 14 130 37,600 60,200 1,110,000 1.17 22.14 697 0.54 0.87 0.34 5-5/8 26,600 4-1/2

9 12 120 26,600 44,400 1,180,000 0.67 23.57 742 0.52 0.88 0.36 5-15/16 25,300 4-1/29 12 120 34,500 57,500 1,420,000 0.87 24.29 765 0.52 0.89 0.37 6-7/32 25,600 4-1/29 12 130 35,900 59,800 1,140,000 0.90 22.61 712 0.52 0.87 0.35 5-15/32 25,000 4-1/29 12 130 35,800 59,700 1,140,000 0.90 22.61 712 0.52 0.87 0.35 5-15/32 25,100 4-1/29 12 130 40,600 67,700 1,200,000 1.02 22.76 717 0.54 0.88 0.35 5-13/16 26,800 4-1/29 12 130 40,600 67,700 1,200,000 1.02 22.76 717 0.54 0.88 0.35 5-13/16 26,900 4-1/211 14 130 41,000 65,700 1,440,000 0.99 23.17 730 0.52 0.87 0.35 5-5/8 30,000 4-1/211 14 130 48,900 78,400 1,440,000 1.18 23.80 750 0.52 0.88 0.36 5-5/8 30,000 4-1/2

4-1/2Tool Joint Assembly

NominalSize

in

TorsionalStrength

ft-lbs

Make-upTorque

ft-lbs

TensileStrength

lbsBoxin

MaterialYield

Strengthksi

Pinin


OpenEndgal/ft

TorsionalRatio

ApproxWt/foot

lbs/ft

ApproxWeight

lbs

DisplacementOD

in

Make-up

ft-lbs

Capacity

gal/ft

Premium

5 19.50 E-75 IEU 0.362 4.276 41,200 396,000 9,960 9,500 NC50 6-3/8 3-1/2

5 19.50 X-95 IEU 0.362 4.276 52,100 501,000 12,000 12,000 NC50 6-3/8 3-1/25 19.50 X-95 IEU 0.362 4.276 52,100 501,000 12,000 12,000 5-1/2 FH 7-1/4 3-3/45 19.50 X-95 IEU 0.362 4.276 52,100 501,000 12,000 12,000 NC50 VAM EIS 6-3/8 3-1/25 19.50 X-95 IEU 0.362 4.276 52,100 501,000 12,000 12,000 NC50 VAM CDS 6-3/8 3-1/25 19.50 X-95 IEU 0.362 4.276 52,100 501,000 12,000 12,000 VAM Express VX46 6 3-1/2

5 19.50 G-105 IEU 0.362 4.276 57,600 554,000 13,000 13,300 NC50 6-5/8 3-1/45 19.50 G-105 IEU 0.362 4.276 57,600 554,000 13,000 13,300 5-1/2 FH 7 4 15 19.50 G-105 IEU 0.362 4.276 57,600 554,000 13,000 13,300 NC50 VAM EIS 6-1/2 3-1/25 19.50 G-105 IEU 0.362 4.276 57,600 554,000 13,000 13,300 NC50 VAM CDS 6-1/2 3-1/25 19.50 G-105 IEU 0.362 4.276 57,600 554,000 13,000 13,300 VAM Express VX46 6 3-1/25 19.50 G-105 IEU 0.362 4.276 57,600 554,000 13,000 13,300 VAM Express VX50 6-1/2 4

5 19.50 S-135 IEU 0.362 4.276 74,100 712,000 15,700 17,100 NC50 6-5/8 2-3/45 19.50 S-135 IEU 0.362 4.276 74,100 712,000 15,700 17,100 5-1/2 FH 7-1/4 3-1/25 19.50 S-135 IEU 0.362 4.276 74,100 712,000 15,700 17,100 NC50 VAM EIS 6-5/8 3-1/25 19.50 S-135 IEU 0.362 4.276 74,100 712,000 15,700 17,100 NC50 VAM CDS 6-5/8 3-1/25 19.50 S-135 IEU 0.362 4.276 74,100 712,000 15,700 17,100 VAM Express VX46 6-1/2 3-1/45 19.50 S-135 IEU 0.362 4.276 74,100 712,000 15,700 17,100 VAM Express VX50 6-1/2 3-3/4

5 25.60 E-75 IEU 0.500 4.000 52,300 530,000 13,500 13,100 NC50 6-3/8 3-1/25 25.60 E-75 IEU 0.500 4.000 52,300 530,000 13,500 13,100 5-1/2 FH 7 3-3/4

5 25.60 X-95 IEU 0.500 4.000 66,200 672,000 17,100 16,600 NC50 6-5/8 35 25.60 X-95 IEU 0.500 4.000 66,200 672,000 17,100 16,600 5-1/2 FH 7 3-1/25 25.60 X-95 IEU 0.500 4.000 66,200 672,000 17,100 16,600 NC50 VAM EIS 6-3/8 3-1/25 25.60 X-95 IEU 0.500 4.000 66,200 672,000 17,100 16,600 NC50 VAM CDS 6-3/8 3-1/25 25.60 X-95 IEU 0.500 4.000 66,200 672,000 17,100 16,600 VAM Express VX46 6-1/4 3-1/25 25.60 X-95 IEU 0.500 4.000 66,200 672,000 17,100 16,600 VAM Express VX50 6-1/2 3-3/4

5 25.60 G-105 IEU 0.500 4.000 73,200 742,000 18,900 18,400 NC50 6-5/8 2-3/45 25.60 G-105 IEU 0.500 4.000 73,200 742,000 18,900 18,400 5-1/2 FH 7-1/4 3-1/25 25.60 G-105 IEU 0.500 4.000 73,200 742,000 18,900 18,400 NC50 VAM EIS 6-5/8 3-1/25 25.60 G-105 IEU 0.500 4.000 73,200 742,000 18,900 18,400 NC50 VAM CDS 6-5/8 3-1/25 25.60 G-105 IEU 0.500 4.000 73,200 742,000 18,900 18,400 VAM Express VX46 6-1/2 3-1/45 25.60 G-105 IEU 0.500 4.000 73,200 742,000 18,900 18,400 VAM Express VX50 6-1/2 3-3/4

5 25.60 S-135 IEU 0.500 4.000 94,100 954,000 24,300 23,600 5-1/2 FH 7-1/4 3-1/45 25.60 S-135 IEU 0.500 4.000 94,100 954,000 24,300 23,600 NC50 VAM EIS 6-5/8 3-1/45 25.60 S-135 IEU 0.500 4.000 94,100 954,000 24,300 23,600 NC50 VAM CDS 6-5/8 3-1/45 25.60 S-135 IEU 0.500 4.000 94,100 954,000 24,300 23,600 VAM Express VX46 6-1/2 3-1/45 25.60 S-135 IEU 0.500 4.000 94,100 954,000 24,300 23,600 VAM Express VX50 6-5/8 3-1/2




in

Weight

ft-lbs

Grade UpsetWall

Thickness

in

ID

in

TorsionalStrength

ft-lbs

TensileStrength

lbs

Collapse

psi

Burst

psi

Connection OD

in

ID

in

35

9 12 120 26,700 44,500 1,110,000 1.08 22.28 702 0.72 1.06 0.34 5-7/8 15,800 5

9 12 120 26,700 44,500 1,110,000 0.85 22.28 702 0.72 1.06 0.34 6-1/32 20,100 510 12 120 38,500 64,200 1,450,000 1.23 24.11 759 0.73 1.09 0.37 6-1/2 20,200 59 12 130 40,600 67,700 1,200,000 1.30 22.28 702 0.72 1.06 0.34 5-13/16 26,800 59 12 130 40,600 67,700 1,200,000 1.30 22.28 702 0.72 1.06 0.34 5-13/16 26,900 511 14 130 37,600 60,200 1,110,000 1.16 21.96 692 0.72 1.05 0.34 5-5/8 26,600 5

9 12 120 30,700 51,200 1,270,000 0.89 23.35 735 0.71 1.07 0.36 6-3/32 21,900 510 12 120 33,400 55,700 1,270,000 0.97 22.84 720 0.74 1.08 0.35 6-9/16 22,300 59 12 130 40,800 67,900 1,200,000 1.18 22.56 711 0.72 1.06 0.34 5-13/16 26,800 59 12 130 40,600 67,700 1,200,000 1.17 22.56 711 0.72 1.06 0.34 5-13/16 26,900 511 14 130 37,600 60,200 1,110,000 1.05 21.96 692 0.72 1.05 0.34 5-5/8 26,600 511 14 130 42,700 68,400 1,130,000 1.19 22.03 694 0.73 1.07 0.34 6-1/32 29,000 5

9 12 120 38,000 63,400 1,550,000 0.86 24.23 763 0.70 1.07 0.37 6-5/16 28,400 510 12 120 43,300 72,200 1,620,000 0.97 24.67 777 0.72 1.09 0.38 6-3/4 28,700 59 12 130 40,900 68,200 1,200,000 0.92 22.85 720 0.72 1.07 0.35 5-7/8 28,700 59 12 130 40,600 67,700 1,200,000 0.91 22.85 720 0.72 1.07 0.35 5-7/8 28,800 511 14 130 47,800 76,700 1,280,000 1.03 23.76 748 0.71 1.07 0.36 5-5/8 30,000 511 14 130 49,200 78,900 1,330,000 1.06 22.64 713 0.73 1.07 0.35 6-1/32 33,300 5

9 12 120 26,700 44,500 1,110,000 0.85 27.72 873 0.64 1.06 0.42 6-1/32 20,100 510 12 120 37,700 62,900 1,450,000 1.20 28.84 908 0.64 1.08 0.44 6-1/2 20,200 5

9 12 120 34,500 57,500 1,420,000 0.87 29.24 921 0.62 1.07 0.45 6-7/32 25,600 510 12 120 37,700 62,900 1,620,000 0.95 29.39 926 0.64 1.08 0.45 6-21/32 25,500 59 12 130 40,600 67,700 1,200,000 1.02 27.72 873 0.64 1.06 0.42 5-13/16 26,800 59 12 130 40,600 67,700 1,200,000 1.02 27.72 873 0.64 1.06 0.42 5-13/16 26,900 511 14 130 40,000 64,200 1,110,000 0.97 27.95 880 0.63 1.06 0.43 5-5/8 26,600 511 14 130 49,200 78,900 1,330,000 1.19 28.02 882 0.64 1.07 0.43 6-1/32 33,300 5

9 12 120 38,000 63,400 1,550,000 0.87 29.66 934 0.62 1.07 0.45 6-9/32 27,400 510 12 120 43,300 72,200 1,620,000 0.99 30.06 947 0.64 1.09 0.46 6-23/32 27,600 59 12 130 40,900 68,200 1,200,000 0.93 28.28 891 0.64 1.07 0.43 5-27/32 27,700 59 12 130 40,600 67,700 1,200,000 0.92 28.28 891 0.64 1.07 0.43 5-27/32 27,900 511 14 130 47,800 76,700 1,280,000 1.05 29.13 918 0.63 1.07 0.45 5-5/8 30,000 511 14 130 49,200 78,900 1,330,000 1.08 28.02 882 0.64 1.07 0.43 6-1/32 33,300 5

10 12 120 47,200 78,700 1,780,000 0.84 30.58 963 0.63 1.09 0.47 6-15/16 35,400 59 12 130 48,500 80,900 1,370,000 0.86 28.78 907 0.63 1.07 0.44 6 35,800 59 12 130 48,300 80,600 1,380,000 0.86 28.78 907 0.63 1.07 0.44 6 35,900 511 14 130 47,800 76,700 1,280,000 0.81 29.13 918 0.63 1.07 0.45 5-7/8 37,200 511 14 130 57,700 92,400 1,510,000 0.98 28.92 911 0.63 1.08 0.44 6-1/32 37,200 5

5Tool Joint Assembly

NominalSize

in

TorsionalStrength

ft-lbs

Make-upTorque

ft-lbs

TensileStrength

lbsBoxin

MaterialYield

Strengthksi

Pinin


OpenEndgal/ft

TorsionalRatio

ApproxWt/foot

lbs/ft

ApproxWeight

lbs

DisplacementOD

in

Make-up

ft-lbs

Capacity

gal/ft

Premium

5-1/2 21.90 E-75 IEU 0.361 4.778 50,700 437,000 8,410 8,610 5-1/2 FH 7 4 1

5-1/2 21.90 X-95 IEU 0.361 4.778 64,200 554,000 10,000 10,900 5-1/2 FH 7 3-3/45-1/2 21.90 X-95 IEU 0.361 4.778 64,200 554,000 10,000 10,900 5-1/2 FH VAM EIS 7 4 15-1/2 21.90 X-95 IEU 0.361 4.778 64,200 554,000 10,000 10,900 5-1/2 FH VAM CDS 7 4 15-1/2 21.90 X-95 IEU 0.361 4.778 64,200 554,000 10,000 10,900 VAM Express VX50 6-5/8 45-1/2 21.90 X-95 IEU 0.361 4.778 64,200 554,000 10,000 10,900 VAM Express VX57 7 4-1/2

5-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 5-1/2 FH 7-1/4 3-1/25-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 NC50 VAM EIS 6-5/8 3-1/25-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 NC50 VAM CDS 6-5/8 3-1/25-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 5-1/2 FH VAM EIS 7 4 15-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 5-1/2 FH VAM CDS 7 4 15-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 VAM Express VX50 6-5/8 45-1/2 21.90 G-105 IEU 0.361 4.778 71,000 612,000 10,800 12,100 VAM Express VX57 7 4-1/2

5-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 5-1/2 FH 7-1/2 35-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 NC50 VAM EIS 6-5/8 3-1/45-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 NC50 VAM CDS 6-5/8 3-1/45-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 5-1/2 FH VAM EIS 7 4 15-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 VAM Express VX50 6-5/8 3-3/45-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 VAM Express VX54 6-3/4 45-1/2 21.90 S-135 IEU 0.361 4.778 91,300 787,000 12,700 15,500 VAM Express VX57 7 4-1/4

5-1/2 24.70 E-75 IEU 0.415 4.670 56,600 497,000 10,500 9,900 5-1/2 FH 7 4 1

5-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 5-1/2 FH 7-1/4 3-1/25-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 NC50 VAM EIS 6-5/8 3-1/45-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 NC50 VAM CDS 6-5/8 3-1/45-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 5-1/2 FH VAM EIS 7 4 15-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 VAM Express VX50 6-5/8 45-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 VAM Express VX54 6-5/8 4-1/45-1/2 24.70 X-95 IEU 0.415 4.670 71,700 630,000 12,900 12,500 VAM Express VX57 7 4-1/2

5-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 5-1/2 FH 7-1/4 3-1/25-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 NC50 VAM EIS 6-5/8 3-1/45-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 NC50 VAM CDS 6-5/8 3-1/45-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 5-1/2 FH VAM EIS 7 4 15-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 VAM Express VX50 6-5/8 3-3/45-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 VAM Express VX54 6-3/4 45-1/2 24.70 G-105 IEU 0.415 4.670 79,200 696,000 14,000 13,900 VAM Express VX57 7 4-1/4

5-1/2 24.70 S-135 IEU 0.415 4.670 102,000 895,000 17,000 17,800 5-1/2 FH 7-1/4 3-1/25-1/2 24.70 S-135 IEU 0.415 4.670 102,000 895,000 17,000 17,800 5-1/2 FH VAM EIS 7 4 15-1/2 24.70 S-135 IEU 0.415 4.670 102,000 895,000 17,000 17,800 5-1/2 FH VAM CDS 7 4 15-1/2 24.70 S-135 IEU 0.415 4.670 102,000 895,000 17,000 17,800 VAM Express VX54 6-3/4 45-1/2 24.70 S-135 IEU 0.415 4.670 102,000 895,000 17,000 17,800 VAM Express VX57 7 4-1/4




in

Weight

ft-lbs

Grade UpsetWall

Thickness

in

ID

in

TorsionalStrength

ft-lbs

TensileStrength

lbs

Collapse

psi

Burst

psi

Connection OD

in

ID

in

37

10 12 120 33,400 55,700 1,270,000 1.10 25.17 793 0.90 1.29 0.38 6-15/32 19,200 5-1/2

10 12 120 37,700 62,900 1,450,000 0.98 25.75 811 0.89 1.29 0.39 6-5/8 24,400 5-1/210 12 130 49,500 82,400 1,370,000 1.28 25.17 793 0.90 1.29 0.38 6-13/32 31,600 5-1/210 12 130 49,400 82,400 1,370,000 1.28 25.17 793 0.90 1.29 0.38 6-13/32 31,800 5-1/211 14 130 42,700 68,400 1,130,000 1.06 24.67 777 0.90 1.28 0.38 6-1/32 29,000 5-1/212 15 130 47,200 75,600 1,180,000 1.18 24.67 777 0.92 1.30 0.38 6-15/32 32,700 5-1/2

10 12 120 43,300 72,200 1,620,000 1.02 26.96 849 0.88 1.29 0.41 6-23/32 27,600 5-1/29 12 130 40,900 68,200 1,200,000 0.96 25.16 793 0.89 1.27 0.38 5-13/16 26,800 5-1/29 12 130 40,600 67,700 1,200,000 0.95 25.16 793 0.89 1.27 0.38 5-13/16 26,900 5-1/210 12 130 49,500 82,400 1,370,000 1.16 25.17 793 0.90 1.29 0.38 6-13/32 31,600 5-1/210 12 130 49,400 82,400 1,370,000 1.16 25.17 793 0.90 1.29 0.38 6-13/32 31,800 5-1/211 14 130 42,700 68,400 1,130,000 0.96 24.67 777 0.90 1.28 0.38 6-1/32 29,000 5-1/212 15 130 47,200 75,600 1,180,000 1.06 24.67 777 0.92 1.30 0.38 6-15/32 32,700 5-1/2

10 12 120 52,100 86,800 1,930,000 0.95 28.68 903 0.87 1.31 0.44 6-15/16 35,400 5-1/29 12 130 48,500 80,900 1,370,000 0.89 25.64 808 0.88 1.27 0.39 5-31/32 34,800 5-1/29 12 130 48,300 80,600 1,380,000 0.88 25.64 808 0.88 1.27 0.39 5-31/32 34,900 5-1/210 12 130 49,500 82,400 1,370,000 0.90 25.17 793 0.90 1.29 0.38 6-1/2 35,000 5-1/211 14 130 52,300 83,800 1,330,000 0.92 25.28 796 0.89 1.28 0.39 6-1/8 36,400 5-1/212 15 130 55,500 89,000 1,340,000 0.97 25.32 798 0.90 1.28 0.39 6-7/32 36,200 5-1/212 15 130 58,800 94,200 1,400,000 1.03 25.39 800 0.91 1.30 0.39 6-15/32 38,000 5-1/2

10 12 120 33,400 55,700 1,270,000 0.98 27.59 869 0.86 1.29 0.42 6-9/16 22,300 5-1/2

10 12 120 43,300 72,200 1,620,000 1.01 29.38 925 0.85 1.29 0.45 6-23/32 27,600 5-1/29 12 130 48,500 80,900 1,370,000 1.13 28.08 884 0.84 1.27 0.43 5-13/16 30,200 5-1/29 12 130 48,300 80,600 1,380,000 1.12 28.08 884 0.84 1.27 0.43 5-13/16 30,300 5-1/210 12 130 49,500 82,400 1,370,000 1.15 27.59 869 0.86 1.29

Documents

Vam Drilling Catalog