VALVES - damoon-co.com · RECEIVER VALVES 6120 6110 6120/33 Castel receiver valves can be used for liquid receivers of refrigerating systems operating with refrigerant fluids CFC,

69

VALVES

70

HERMETIC VALVES

– 6060, with right chargingconnection;

– 6070, with left chargingconnection.

The charging connection is shutoff by the back-seating of thespindle.

The materials used for the mainparts are:• ST-UNI EN 12165 - CW 617N

hot-forged brass for the mainbody;

• especially treated steel forthe spindle;

• aramidic and chloroprenegaskets for the gland seal;

• glass reinforced PBT for thecap.

MATERIALS

6020

6010/2

Hermetic valves are used insystems operating withhermetic compressors.They can be used withrefrigerant fluids CFC, HCFCand HFC.These valves are available inthe following types:• shut-off valves with

2 connections: 6010/2 and6012/22;

• valves with 3 connections (2 connections + 1charging/manometerconnection): 6020;

• monobloc valves with 3 connections (2 connections+ 1 charging/manometerconnection):

APPLICATIONS6010/2

6012/22

71

TABLE 1 - General Characteristics

6060

6070

6070/23M10

FluidTemperature

[°C]Dimensions [mm]

ConnectionsSolderCatalogue SAE flare

Number � � � �

[in.] [mm] [m3/h]

6010/2 1/4” 1/4” – 0,27

6012/22 – 1/4” 1/4” 0,27

6020/222 1/4” 1/4” 1/4” 0,39

6020/233 1/4” 3/8” 3/8” 1,20

6020/244 1/4” 1/2” 1/2” 2,20

6020/255 1/4” 5/8” 5/8” 2,80

6060/22M6 1/4” 1/4” 6 0,46

6070/23M8 1/4” 3/8” 8 1,29

6070/23M10 1/4” 3/8” 10 1,38

6070/24M12 1/4” 1/2” 12 2,55

6070/25M16 1/4” 5/8” 16 3,40

MAX

pres

sure

kvFa

ctor

Weight

[bar] min. max H1 H2 H3 H4 H5 I L1 L2 L3 P1

[g]

14 66 36 – 58 160–60 +130

14 66 36 29 55,5 145

25 51 61 115 62 360

25 51 61 115 67 370

26,5 52 68,5 127 77 52030

26,5 52 68,5 127 79 530

–60 +120 31 25,5 56,5 1 24 34 92 30,5 205

33,5 25,5 59 1 27 37 90 30,5 210

33,5 25,5 59 1 27 37 90 30,5 220

38,5 29,5 68 1 28 43,5 102 32,5 310

39,5 29,5 69 1 28 43,5 102 32,5 320

72

RECEIVER VALVES

61106120

6120/33

Castel receiver valves can beused for liquid receivers ofrefrigerating systems operatingwith refrigerant fluids CFC,HCFC and HFC.

6110, 6120 and 6132 valveshave 90° angle connections.6140 receiver valves haveconnections at 120°.Type 6132 also has anadditional male connectionwhich can be closed by theback seating of the spindle.


hot-forged brass for the mainbody;


• aramidic and chloroprenegaskets for gland seal;

• reinforced glass PBT for cap.

CONSTRUCTION

APPLICATIONS

73

TABLE 1 - General CharacteristicsCharging Connections kv MAX Fluid Dimensions

Catalogue Connections Factor Pressure Temperature [mm] WeightNumber SAE SAE NPT [°C]

flare flare [m3/h] [bar] min max H1 H2 L1 L2

[g]

6110/22 1/4” 1/4” 0,44 72 48 27,5 110

6110/23 1/4” 3/8” 0,45 77 50 29 135

6110/32 3/8” 1/4” 1,35 77 50 31 130

6110/33 3/8” 3/8” 1,35 77 50 31 140

6110/43 1/2” 3/8” 2,40 88 55,5 34,5 220

6110/44 1/2” 1/2” 3,40 92 55,5 34,5 235

6110/54 5/8” 1/2” 3,30 92 55,5 34,5 245

6110/66 3/4” 3/4” 6,00 –60 +130 128 88 42,5 675

6120/22 1/4” 1/4” 0,44 27,5 72 48 110

6120/23 1/4” 3/8” 0,45 30 30 77 50 130

6120/33 3/8” 3/8” 1,35 30 80 50 140

6120/43 1/2” 3/8” 2,40 30 93 55,5 225

6120/44 1/2” 1/2” 2,40 33 93 55,5 305

6120/54 5/8” 1/2” 3,30 33 94 55,5 245

6120/66 3/4” 3/4” 6,00 40 129,5 88 670

6132/22 1/4” 1/4” 1/4” 0,45 56 29 94 64 240

6132/33 1/4” 3/8” 3/8” 1,20–60 +120

56 29 97 64 250

6132/44 1/4” 1/2” 1/2” 2,20 63,5 36 114,5 77,5 375

6132/54 1/4” 5/8” 1/2” 3,85 63,5 36 117,5 77,5 365

6140/22 1/4” 1/4” 0,36–60 +130

57 69 46 115

6140/23 1/4” 3/8” 0,36 57 69 46 125

6132 6140

74

STOP VALVES

6165, 6175 and 6170 stopvalves are specially designedfor application on split airconditioners.They can be used withrefrigerant fluids CFC, HCFCand HFC.

The very compact design ofthese brass valves allowsminimum dimensional sizes andthe fixing flange complies withcurrent market requirements.Valves 6170 and 6175 must becompleted with valve core8394/A or 8394/B and cap andgasket type 8392/A, to beordered separately.


hot-forged brass for thebody;

• TN-UNI EN 12164 - CW 614Nbrass for spindle and cap;

• chloroprene rubber (CR) forouter seal gaskets.

Only for the 6170 group ofvalves, aramidic andchloroprene gaskets for thegland seals.

CONSTRUCTION

APPLICATIONS

TABLE 1 - General CharacteristicsConnections Fluid

Catalogue WayTemperature Dimensions [mm]

WeightNumber SAE SAE

[°C][g]

flare flare [in.] [mm] [m3/h] [bar] min max H1 H2 H3 L1 L2 L3 I

6165/222

– 1/4” 1/4” – 0,68 17 52 29 – – 113

6165/33 – 3/8” 3/8” – 1,70 17 52 30,5 – – 120

6175/33 1/4” 3/8” 3/8” – 1,70 17 52 8 30,5 29 59,5 38 135

6175/44 1/4” 1/2” 1/2” – 3,40 30 –20 +110 20 65 36 31 67 225

6175/55 3 1/4” 5/8” 5/8” 16 4,60 20 65 36 31 67 235

6170/66 1/4” 3/4” 3/4” – 9,00 28,5 10412

47 36 8350

655

6170/77 1/4” 7/8” 7/8” – 10,80 28,5 104 47 36 83 670

6165

61706175

6165/33 6175/33

kvFa

ctor

MA

XP

ress

ure

ODS Ø

Chargingconnec-

tions

Castel diaphragm valves areparticularly suitable for use onrefrigerating systems operatingwith refrigerant fluids CFC,HCFC and HFC.

Diaphragm valves don’t havegland seal. External sealing isensured by thin metal discs(diaphragms) ensuring hermeticsealing of the area throughwhich the fluid flows.


hot-forged brass for the bodyand the cap;

• nylon for the seat sealinggasket;

• harmonic steel for the spring.

CONSTRUCTION

APPLICATIONS

75

DIAPHRAGM VALVES

TABLE 1 - General CharacteristicsConnections Fluid

Catalogue Temperature Dimensions [mm] WeightNumber SAE NPT [°C] [g]

flare [in.] [mm] [m3/h] [bar] min max d D H1 H2 L1 L2 I

6210/2 1/4” – – –68

58– 36

200

6220/2 – – 1/4” –0,28

54 53 195

6210/3 3/8” – – –1,00

74 325

6220/3 – – 3/8” –4,5 52

61 300

6210/4 1/2” – – –1,30 72

78– 38

335

6220/4 – – 1/2” – 53,5 70 305

6210/5 5/8” – – –1,80

78 340

6220/5 – – 5/8” 16 71 300

6210/6 3/4” – – – 28 – 35 + 90 98 655

6220/6 – – 3/4” – 3,65 6,2 60 86 62,5 92 – 50 580

6220/7 – – 7/8” – 94 645

6230/22 1/4” 1/4” – – 0,50 82 34 280

6230/33 3/8” 3/8” – – 1,40 – 82 37 – – 285

6230/44 1/2” 1/2” – – 1,6052

86,553,5

37 305

6260/2 1/4” – – – 0,35 68 35 340

6260/3 3/8” – – – 0,90 4,5 72 72 36 38 355

6260/4 1/2” – – – 1,35 74 37 380

6210/4

kvFa

ctor

MA

XP

ress

ure

ODS Ø

76

6210 6220

6230

6260

N.B. When the valve 6260 is closed, connections A-B are openand C is stopped; when opened, all connections are open.

77

ROTALOCK VALVES

Castel Rotalock valves can beused for refrigerating systemsoperating with refrigerant fluidsCFC, HCFC and HFC.

Rotalock valves can bemounted with 7910 and 7990gaskets, and ensure fastinstallation and safe sealing.Tightness is assured by thetorque of the ring on thecoupling. Before tightening it ispossible to turn the valve inevery direction. All Rotalockvalves have an additional maleconnection which can beexcluded by the back sealing of

CONSTRUCTION

APPLICATIONS


the spindle.Couplings and gaskets have tobe ordered separately.

The materials used for the mainparts are:– for the valves:

• ST-UNI EN 12165 - CW 617 Nhot-forged brass for themain body;

• especially treated steel forthe spindle and the ring;


• glass reinforced PBT forcap.

– for couplings:• steel for welding

– for gaskets:• P.T.F.E.

Coupling Gasket Charging Connections MAX FluidCatalogue catalogue catalogue connections Pressures Temperature Dimensions [mm] WeightNumber number number SAE Ring [°C] [g]

SAEflare flare [m3/h] [bar] min max H1 H2 L1 L2

6310/2 1/4” 1/4” 0,46 68,5 33,5 94 64 290

6310/3 7910/6 7990/6 1/4” 3/8” 3/4” UNF 1,35 68,5 33,5 97 64 300

6310/4 1/4” 1/2” 1,35 68,5 33,5 97 64 300

6320/3 1/4” 3/8” 1,40 30 –60 +120 69,5 34,5 97 64 330

6320/47910/8 7990/8

1/4” 1/2”1” UNS

3,10 72 36,5 114,5 77,5 400

6320/5 1/4” 5/8” 3,40 72 36,5 117,5 77,5 415

6320/6 1/4” 3/4” 3,40 72 36,5 118 77,5 425

Valves63106320

Gasket7990

Coupling7910

63106320

6310/3

kvFa

ctor

78

CAPPED VALVES

6410 6420

6410/4

Capped valves can be mountedin any point of the refrigeratingsystem using refrigerant fluidsCFC, HCFC and HFC.

Capped valves consist of twomain parts: the body and thespindle assembly.


hot-forged brass for body;• especially treated steel for

spindle;• aramidic and chloroprene

gaskets for gland seal;• glass reinforced PBT for cap.

When mounting the 6420 valve,the valve body must be

INSTALLATION

CONSTRUCTION

APPLICATIONS

soldered to the piping afterremoval the spindle assembly.

When the latter is repositioned,the operation is completed.

79

TABLE 1 - General CharacteristicsConnections kv MAX Fluid

WeightCatalogue SAE FlareFactor Pressures temperature Dimensions [mm]

[g]Number [°C]

male female [in.] [mm] [m3/h] [bar] min max d H1 H2 I L1 L2 L3 P1

6410/2 1/4” – – – 68 305

6420/2 – – 1/4” –0,40

57 300

6410/3 3/8” – – – 74 325

6420/3 – – 3/8” – 1,00 61 305

6420/M10 – – – 10 61 305

6410/4 1/2” – – – 4,5 85,5 67 38 78 330

6420/M12 – – – 12 1,45 70 305

6420/4 – – 1/2” – 30 –60 +120 70 – – – 305

6410/5 5/8” – – –1,70

78 330

6420/5 – – 5/8” 16 71 305

6410/6 3/4” – – – 98 695

6420/M18 – – – 18 92 700

6420/6 – – 3/4” – 3,50 6,2 113 89,5 50 92 685

6420/M22 – – – 22 94 690

6420/7 – – 7/8” – 94 690

6460/22A 1/4” 1/4” – – 0,35 4,5 85,5 67 38 97 34 51 35 395

6460/22A

80

GLOBE VALVES

Globe valves can be used onrefrigerating systems in order tointercept the refrigerant fluidsCFC, HCFC and HFC.

Globe valves are manufacturedin two basic types: 6510 withstraight connections and 6530with angle connections.Valves 6520, which havestraight connections, aresupplied with flanges. In thisapplication, copper pipe issoldered on a brass bush andnot directly on the valve.Globe valves have large orificesto keep the pressure drop to aminimum. On the top of thecaps there is a square seat,fitting it on the spindle it ispossible to use the cap as anoperating wrench.


hot-forged brass for body,plug and cap;

• especially treated steel forspindle;

• aramidic and chloroprenegaskets for gland seal;

• chloroprene rubber (CR) forouter seal gaskets;

• P.T.F.E. for seat gasket.

CONSTRUCTION

APPLICATIONS

6510

6510/9

81

TABLE 1 - General CharacteristicsConnections kv MAX Fluid

WeightCatalogue ODS ØFactor Pressures Temperature Dimensions [mm]

[g]Number [°C]

[in.] [mm] [m3/h] [bar] min max A B H H1 L ❑

6510/M22 – 227,1

1415

6510/7 7/8” – 1420

6510/M28 – 288,4

22 94 136 28,5 100 601320

6510/9 1.1/8” – 1320

6510/11 1.3/8” 35 15,0 25 126 166 34 118 68 1885

6510/13 1.5/8” –25

3600

6510/M42 – 42 30 138199 37 141 88

3620

6510/17 2.1/8” 54 40,0 215 42,5 173 104 4930

6520/7 7/8” – 7,1 2280

6520/9 1.1/8” – 8,423 94 136 28,5 170 60

2150

6520/11 1.3/8” 35 15 – 126 166 34 185 68 3865

6520/13 1.5/8” –25

5845

6520/M42 – 4224 138 199 37 217 88

5835

6520/17 2.1/8” 54 40,0 25 – 215 42,5 255 104 8705

6530/M22 – 228,2

1305

6530/7 7/8” – 1305

6530/M28 – 289,1

22 94 147 44,5 50 601240

6530/9 1.1/8” – 1240

6530/11 1.3/8” 35 18,7 25 126 165 52,5 59 68 1895

6530/13 1.5/8” –38

5165

6530/M42 – 42 30 138 238 65 86,5 104 5165

6530/17 2.1/8” 54 48,5 4900

65306520

–3530 +100

82

BALL VALVES

6590 ball valves have beenexclusively designed andmanufactured for refrigeratingsystems operating withrefrigerant fluids CFC, HCFCand HFC.

The valve design ensures theinternal equilibrium of pressureswhen the valve is closed,permits the bi-directional flowof the refrigerant and,consequently, the assembly onthe plant without taking intoaccount the direction of therefrigerant.The assembling of the spindle

CONSTRUCTION

APPLICATIONS

6590/M42

from the inside prevents anyrisk of explosion.The opening and closing of thevalve is realised by turning thespindle one fourth of a turn. A standstill in turning realiseseither a full opening or a fullclosing, moreover the arrowprinted on the spindle headshows the flow direction.Electric welding of the bodiesand “O ring“ assembled on thespindle prevent leaks.


hot-forged brass for body;• ST-UNI EN 12165 - CW 617N

chromium plated brass ball;• especially treated steel for

the spindle;• P.T.F.E. for ball gaskets;• chloroprene rubber (CR) for

outer seal gaskets;• solder copper connections;• glass reinforced PBT for cap.

83


CatalogueConnections Ball kv MAX Fluid Dimensions [mm]

WeightNumber ODS Ø port Factor Pressure Temperature [°C]

[g][in.] [mm] [mm] [m3/h] [bar] min max A B C D F G

6585/M6 (1) – 60,8

260

6585/2 (1) 1/4” – 260

6590/3 3/8” –3 121

265

6590/M10 – 10 10 73 20 53 265

6590/M12 – 12 270

6590/4 1/2” – 5 270

6591/5 5/8” 16 138 285

6590/5 5/8” 16 380

6590/M18 – 1815 14,5

14180 24 56

390

6590/6 3/4” – 390

6591/7 7/8” 22 177 400

6590/7 7/8” 22 175 745

6591/M28 – 28 19 24206

95,5 27,5 68 760

6591/9 1.1/8” – 760

6590/M28 – 28206

1000

6590/9 1.1/8” – 25 40 101,5 30 71,5 1000

6591/11 1.3/8” 35 248 1050

6590/11 1.3/8” 35 2000

6591/13 1.5/8” – 32 68 247 117 38 79 2000

6591/M42 – 42 2000

6590/13 1.5/8” – 3100

6590/M42 – 42 38 100262

130 45 85 3100

6591/17 2.1/8” 54 292 3150

6590/17 2.1/8” 5450 178 303 150 55 95

5000

6591/21 2.5/8” – 5000

30 –45 +150

30 M6

18 M5

(1) Bodies without electric welding, chloroprene rubber (CR) for outer seal gasket.

84

These valves are normallymounted on the body of therefrigerating compressor, onboth suction and dischargesides. They can be used withrefrigerant fluids CFC, HCFCand HFC.

Compressor valves have athreaded connection that canbe used both as charging orgauge connection. Thecharging connection is cut offby the back-seating of thespindle. The compressor valvesare oval flanged with SAE-FLARE connection to fit copperpipes through a suitable nut.

The materials used in theconstruction of the main partsare:• ST-UNI EN 12165 - CW 617N

hot-forged brass for thebody, flange and bush;



• steel for the cap;• glass reinforced PBT for the

cap.

CONSTRUCTION

APPLICATIONS

COMPRESSOR VALVES


CatalogueConnections Distance Flange kv MAX Fluid Dimensions [mm]

WeightNumber

SAE flare between fixing fixing Ø Factor Pressure Temperature[g]

centers [mm] [mm] [m3/h] [bar] [°C]D1 H1 H2 H3 L1 L2

6640/3 3/8” 2,33-60

36 110 395

6640/4 1/2”40÷41 9,5

2,8530 ÷ 14 15 52 58

38 112 405

6640/5 5/8” 3,50+120

42 116 420

6640/6 3/4” 3,70 42 116 440

6640

6640/4

Documents

VALVES - damoon-co.com · RECEIVER VALVES 6120 6110 6120/33 Castel receiver valves can be used for liquid receivers of refrigerating systems operating with refrigerant fluids CFC,