Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Valves
Valves Range 1340 Double Check Valves PN16
Material Specification
1340 - 1/2" - 2"
No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon Nylon 66 4 Clip Stainless steel BS.ISO.15510 5 O Ring EPDM EN 2430:1995 6 Drain Screw DZR Brass BS EN 1982 CC491K
Valves Valves Range: 1340 Double Check Valves PN16
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1340 x 3 3 x x x x x x
Valve Suitability
1340 Temp (°C) Bar psi
Water -10 to 85°C PN16
Max. working parameters
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement
and BS 6282-1 Standards.
• ISO 228 parallel female ends.
• PN 16 from -10° to 85°C.
• Specifically designed to be used with water.
• Prevents back siphonage.
• Manufactured in accordance with BS EN 13959.
Double Check Valve - 1340
Order Code
ISO 288 threadSize DN A B
Weight (kg)
134050FF0160404 1/2" 15 70 17.3 0.10134050FF0160606 3/4" 20 85 19.8 0.17134050FF0160808 1" 25 100 22.8 0.27134050FF0161010 1 1/4" 32 120 26.1 0.40134050FF0161212 1 1/2" 40 138.5 30.3 0.58134050FF0161616 2" 50 183.2 35.8 1.30
Valves
Valves Range 1360 Horizontal Lift Check Valves PN32
Material Specification
1360 - 1/2" - 2"
No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Disc Bronze BS EN 1982 CC491K 4 Gasket Seal PTFE PTFE 5 ID Disc Aluminium EN 1706 LM6
Valves Valves Range: 1360 Horizontal Lift Check Valves PN32
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1360 3 3 3 3 3 x x x x
Valve Suitability
1360 Temp (°C) Bar psi
Water -10°C to + 100°C PN 32
Water at 200°C PN16
Max. working parameters
Specification:Valves are manufactured in accordance with BS 5154.
Disc is spherical shaped guided in the cap. Body seat is integral.
Connecting threads are in accordance with BS EN 10266 (ISO7) or ISO228.
This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
0 40 80 120 160 200 240
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Suitable for water and steam service.
• Metal to metal seat.
• Designed in accordance with BS 5154 and WRAS requirements.
• Threads to BS EN 10226 (ISO7).
• Suitable for LTHW and chilled systems.
Horizontal Lift Check Valve - 1360
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
136020RR0320404 1/2" 15 60 34 0.28136020RR0320606 3/4" 20 75 42 0.44136020RR0320808 1" 25 85 46 0.60136020RR0321010 1 1/4" 32 100 51 1.14136020RR0321212 1 1/2" 40 110 54 1.46136020RR0321616 2" 50 120 72 2.57
Valves
1451 - 1/2" - 2"
No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW
Valves Range 1451 Spring Check Non Return Valve
Material Specification
Valves Valves Range: 1451 Spring Check Non Return Valve
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1451 x 3 3 x 3* x x x x
Valve Suitability
1451 Temp (°C) Bar psi
Water -10°C to + 100°C PN 12/10 Min Operating Pressure
1/2" - 1" 12 bar @ 90°C -0.002 bar to + 0.04 bar
1/4" - 2" 10 bar @ 90°C Not suitable for hot working
Max. working parameters
* Limited to 5 bar max
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Brass core for improved strength and performance .
• PN12 up to 1", PN10 above 1".
• Threads to ISO228.
Non-Return Valve - 1451
Order Code
ISO228 ThreadSize DN A B
Weight (kg)
145110FF0120404 1/2" 15 12 47.5 33145110FF0120606 3/4" 20 12 51 42145110FF0120808 1" 25 12 58 47145110FF0101010 1 1/4" 32 10 72 59145110FF0101212 1 1/2" 40 10 83 67145110FF0101616 2" 50 10 91 83
Valves
Valves Range 1461 Foot Valve
Material Specification
1461 - 1/2" - 2"
No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW 7 Strainer Stainless Steel BS.ISO.15510 8 Strainer Adaptor Acetal Acetal
Valves Valves Range: 1461 Foot Valve
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1461 x 3 x 3 3* x x x x
Valve Suitability
1461 Temp (°C) Bar psi
Water -10°C to + 100°C PN 12/10 Min Operating Pressure
1/2" - 1" 12 bar @ 90°C Not Suitable for Hot working Pressure
1/4" - 2" 10 bar @ 90°C
Max. working parameters
* Limited to 5 bar max
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Stainless steel mesh strainer.
• Brass core for improved strength and performance.
• PN12 up to 1", PN10 above 1".
• Threads to ISO228.
Non-Return Valve - 1461
Order Code
ISO228 ThreadSize DN A B
Weight (kg)
146110FF0120404 1/2" 15 12 65 33146110FF0120606 3/4" 20 12 86 42146110FF0120808 1" 25 12 103.5 47146110FF0101010 1 1/4" 32 10 119 59146110FF0101212 1 1/2" 40 10 141.5 67146110FF0101616 2" 50 10 159 83
Valves
Valves Range 1470 Swing Check Valve PN25 (Brass)
Material Specification
1470 - 1/2" - 2"
No Component Material Specification 1 Body Brass BS EN 112165 CW617N 2 Cap Brass BS EN 112165 CW617N 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Brass BS EN 112165 CW617N 6 Seat Brass BS EN 112165 CW617N 7 Retaining Nut Brass BS EN 112165 CW617N
Valves Valves Range: 1470 Swing Check Valve PN25 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1470 3 3 3 3 x x x x x
Valve Suitability
1470 Temp (°C) Bar psi
Water -10°C to + 100°C PN25
at 186°C PN10.5
Max. working parameters
Specification:Brass Body.
Metal Disc, Screwed in Cap.
Operation is automatic using a swing type check.
Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.
Connecting threads are to BS EN 10226.
This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
0 30 60 90 120 150 180 210
186100
10.5
25
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Suitable for water and other liquids.
• Metal to metal seat.
• Horizontal swing check design.
• Choice of alternative disc material.
• Threads to BS EN 10226 (ISO 7).
• Threads to ISO228 available to order.
Swing Check Valve - 1470
Order Code
ISO7 ThreadSize DN A B
Weight (kg)
147010RR0250404 1/2" 15 60 42 0.26147010RR0250606 3/4" 20 70 48 0.37147010RR0250808 1" 25 80 54 0.64147010RR0251010 1 1/4" 32 90 60 0.92147010RR0251212 1 1/2" 40 100 70 1.26147010RR0251616 2" 50 110 80 1.95
Valves
Valves Range 1470 Swing Check Valve PN25 (Bronze)
Material Specification
1470 - 1/2" - 2"
No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Bronze BS EN 1982 CC491K 6 Seat Bronze BS EN 1982 CC491K 7 Retaining Nut Bronze BS EN 1982 CC491K
Valves Valves Range: 1470 Swing Check Valve PN25 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1470 3 3 3 3 3 x x x x
Valve Suitability
1470 Temp (°C) Bar psi
Water -10°C to + 100°C PN25
at 186°C PN10.5
Max. working parameters
Specification:Bronze Body
Metal Disc, Screwed in Cap.
Operation is automatic using a swing type check.
Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings.
This valve is not suitable for use on Group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Suitable for water and other liquids.
• Metal to metal seat.
• Horizontal swing check design.
• Choice of alternative disc material.
• Threads to BS EN 10226 ( ISO7).
• Suitable for LTHW and chilled systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
0 30 60 90 120 150 180 210
186100
10.5
25
Swing Check Valve - 1470
Order Code
ISO7 ThreadSize DN A B
Weight (kg)
147020RR0250404 1/2" 15 60 42 0.36147020RR0250606 3/4" 20 70 48 0.44147020RR0250808 1" 25 80 54 0.69147020RR0251010 1 1/4" 32 90 60 0.97147020RR0251212 1 1/2" 40 100 70 1.38147020RR0251616 2" 50 110 80 2.01
Valves
Valves Range S746 Drain Tap
Material Specification
S746 - 1/2"
No Component Material Specification 1 Body DZR BS EN12165 CW602N 2 Seat Washer NBR NBR 3 Washer Plate Brass BS EN12165 CW617N-DW 4 Spindle Brass BS EN12165 CW617N-DW 5 O Ring NBR NBR 6 Gland Nut Brass BS EN 12164 CW614N
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
2
Valves Valves Range: S746 Drain Tap
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) S746 x 3 3 x x x x x x
Valve Suitability
S746 Temp (°C) Bar psi Non Gas -30°C to + 110°C PN16/PN5
Max. working parameters
Specification Clause:
Designed and manufactured to BS 2879 Type 2
Dezincification Resistant
WRAS Approved
Pressure rating PN 16 at 30°C : PN 5 at 110°C
Operating Temperature Range 0 to 110°C
Loose key operation
This valve is excluded from the requirements of the Pressure Equipment Directive PED 97/23/EC Article 1 - 3.20
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Approved for drinking water applications.
Drain tap - S746
Order Code Size DN A B CWeight
(kg)
N746015000000 1/2” 15
Valves
Valves Range 1120 Gate Valve Handwheel – PN20 Light Pattern
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Handwheel version: 1120 - 1/2" - 2" No Component Material Specification
1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Material Specification
Valves Valves Range: 1120 Gate Valve Handwheel – PN20 Light Pattern
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1120 x 3 3 3 x x x x x
Valve Suitability
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Non-rising stem.
Handwheel operated.
Threaded bonnet.
One piece wedge.
Taper threaded BS EN 10226 (ISO 7-1) or parallel threaded to ISO228.
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100
0 30 60 90 120 150 180 210
1120 Temp (°C) bar psi
Water -10°C to + 100°C PN20
Max. working parameters
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Inside screw pattern with non rising stem.
• Designed in accordance with WRAS requirements .
• Designed in accordance with BS EN 12288.
• High quality brass construction.
• Not suitable for high temperature working.
• Threads to BS EN 10226 (ISO7).
• Available with ISO228 thread to order.
• Unique Conex handwheel.
Gate Valve - 1120
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112010RRW200404 1/2" 15 48 70 0.25112010RRW200606 3/4" 20 50 80 0.39 112010RRW200808 1" 25 60 90 0.58 112010RRW201010 11/4" 32 64 115 0.98 112010RRW201212 11/2" 40 69 125 1.10 112010RRW201616 2" 50 81 155 1.80
Valves
B
121110293481756
1413
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Handwheel version: 1001 - 15-54mm
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6 13 Compression Ring Brass BS 2872 CZ107 14 Compression nut Brass BS EN 12165 CW617N-DW
Valves Range 1001 Gate Valve Handwheel PN16 – Compression Material Specification
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Valves Valves Range: 1001 Gate Valve Handwheel PN16 – Compression
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1001 x 3 3 x x x x x x
Valve Suitability
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Non-rising stem.
Handwheel operated.
Threaded bonnet.
One piece wedge.
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100
0 30 60 90 120 150 180 210
1001 Temp (°C) bar psi Water -10°C to + 100°C PN16
Max. working parameters
Features and Benefits:
• Inside screw pattern with non rising stem.
• Designed in accordance with WRAS requirements.
• Designed in accordance with BS EN 12288.
• High quality brass construction.
• Not suitable for high temperature working.
• Unique Conex handwheel.
Gate Valve - 1001
Order Code Size DN A BWeight
(kg)
100110CCW16E-E- 15 48 85100110CCW16G-G- 22 53 98100110CCW16H-H- 28 66 105100110CCW16J-J- 35 68 122.5100110CCW16K-K- 42 72 145.7100110CCW16N-N- 54 92 170
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Lock Shield version: 1001 - 15-54mm 1121 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW602N 9 Ferrule Brass BS EN 12164 CW614N
Valves Range 1121 Gate Valve Lock Shield PN20 (Bronze)
Material Specification
Valves Valves Range: 1121 Gate Valve Lock Shield PN20 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1121 3 3 3 3 x x x x x
Valve Suitability
1121 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.
Bronze non-rising stem.
Lockshield key operated.
Bronze threaded bonnet.
Bronze one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Suitable for use with LTHW and chilled systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Designed in accordance with DIN 50930-6 CC499K.
• Lock shield key available.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1121
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112120RRK200404 1/2" 15 55 85 0.32112120RRK200606 3/4" 20 60 95 0.414112120RRK200808 1" 25 65 110 0.63112120RRK201010 1 1/4" 32 75 125 1.03112120RRK201212 1 1/2" 40 80 145 1.40112120RRK201616 2" 50 90 170 1.94112120RRK202020 2 1/2" 65 100 - -112120RRK202424 3" 80 115 - -112120RRK203232 4" 100 135 - -
Valves
Valves Range 1121 Gate Valve Handwheel PN20 (Bronze)
Material Specification
Handwheel version: 1121 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Valves Range: 1121 Gate Valve Handwheel PN20 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1121 3 3 3 3 x x x x x
Valve Suitability
1121 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.
Bronze non-rising stem.
Handwheel operated.
Bronze threaded bonnet.
Bronze one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Robust Construction ensures reliable in-process service.
• Designed in accordance with WRAS requirements.
• Designed in accordance with DIN 50930-6 CC499K.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1121
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112120RRW200404 1/2" 15 55 85 0.28112120RRW200606 3/4" 20 60 95 0.41112120RRW200808 1" 25 70 115 0.60112120RRW201010 1 1/4" 32 75 125 1.01112120RRW201212 1 1/2" 40 80 145 1.35112120RRW201616 2" 50 90 165 1.90112120RRW202020 2 1/2" 65 100 210 -112120RRW202424 3" 80 115 240 -112120RRW203232 4" 100 135 290 -
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1122 Gate Valve Handwheel PN20 (Brass)
Material Specification
Handwheel version: 1122 - 1/2" - 4"
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Valves Valves Range: 1122 Gate Valve Handwheel PN20 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1122 3 3 3 3 x x x x x
Valve Suitability
1122 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Non-rising stem.
Handwheel operated.
Threaded bonnet.
One piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Inside screw pattern with non rising stem.
• Designed in accordance with WRAS requirements.
• Designed in accordance with BS EN 12288.
• Robust design minimising pressure drop.
• High quality brass construction.
• Threads to BS EN 10226 (ISO7).
• Available with ISO228 thread.
Gate Valve - 1122
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112210RRW200404 1/2" 15 55 85 0.26
112210RRW200606 3/4" 20 60 95 0.40
112210RRW200808 1" 25 70 115 0.57112210RRW201010 1 1/4 32 75 125 0.96112210RRW201212 1 1/2" 40 80 145 1.13112210RRW201616 2" 50 90 165 1.81112210RRW202020 2 1/2" 65 100 210112210RRW202424 3" 80 115 240112210RRW203232 4" 100 135 290
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1122 Gate Valve Lock Shield PN20 (Brass)
Material Specification
Lock Shield version: 1122 - 1/2" - 4"
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer Brass BS EN 12165 CW617N-DW 9 Ferrule Brass BS EN 12164 CW614N
Valves Valves Range: 1122 Gate Valve Lock Shield PN20 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1122 3 3 3 3 x x x x x
Valve Suitability
1122 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Brass non-rising stem.
Lockshield key operated.
Brass threaded bonnet.
Brass one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Inside screen pattern with non rising stem.
• Lock shield key available.
• Designed in accordance with BS EN 12288.
• Threads in accordance with BS EN 10226 (ISO7).
Gate Valve - 1122
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112210RRK200404 1/2" 15 55 85 0.26112210RRK200606 3/4" 20 60 95 0.40112210RRK200808 1" 25 65 110 0.57112210RRK201010 1 1/4" 32 75 125 0.95112210RRK201212 1 1/2" 40 80 145 1.12112210RRK201616 2" 50 90 170 1.80112210RRK202020 2 1/2" 65 100112210RRK202424 3" 80 115112210RRK203232 4" 100 135
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1124 Gate Valve Handwheel PN20 (DZR)
Material Specification
Handwheel version: 1124 - 1/2" - 4"
No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW617N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Valves Valves Range: 1124 Gate Valve Handwheel PN20 (DZR)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1124 3 3 3 3 x x x x x
Valve Suitability
1124 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:DZR Brass Gate Valve designed in accordance with BS EN 12288.
DZR non-rising stem.
Handwheel operated.
DZR Brass threaded bonnet.
DZR Brass one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Dezincification resistant brass construction .
• Lock shield key available.
• Limits fungal growth and reduces system corrosion.
• Designed in accordance with BS EN 12288.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1124
Order Code
BS EN 10226 (ISO 07) threadSize DN A B
Weight (kg)
112450RRW200404 1/2" 15 55 85 0.28112450RRW200606 3/4" 20 60 95 0.41112450RRW20080 1" 25 65 115 0.61
112450RRW201010 11/4" 32 75 125 1.01112450RRW201212 11/2" 40 80 145 1.16112450RRW201616 2" 50 90 165 1.90112450RRW202020 2 ½" 65 100 210 -112450RRW202424 3" 80 115 240 -112450RRW203232 4" 100 135 290 -
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1124 Gate Valve Lock Shield PN20 (DZR)
Material Specification
Lock Shield version: 1124- 1/2" - 4"
No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW602N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Ferrule Brass BS EN 12164 CW614N
Valves Valves Range: 1124 Gate Valve Lock Shield PN20 (DZR)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1124 3 3 3 3 x x x x x
Valve Suitability
1124 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:DZR Brass Gate Valve designed in accordance with BS EN 12288.
DZR Brass non-rising stem.
Lockshield key operated.
DZR threaded bonnet.
DZR one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Non-rising stem design.
• Designed in accordance with WRAS requirements.
• Designed in accordance with BS EN 12288.
• Dezincification resistant brass prevents system corrosion and reduces fungal growth.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1124
Order Code
BS EN 10226 (ISO 7) taper thread
Size DN A BWeight
(kg)
112450RRK200404 1/2" 15 55 85 0.26112450RRK200606 3/4" 20 60 95 0.40112450RRK200808 1" 25 65 110 0.57112450RRK201010 11/4" 32 75 125 0.96112450RRK201212 11/2" 40 80 145 1.13112450RRK201616 2" 50 90 170 1.81112450RRK202020 2 ½" 65 100 - -112450RRK202424 3" 80 115 - -112450RRK203232 4" 100 135 - -
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1126 Gate Valve Handwheel PN32 (Bronze)
Material Specification
Handwheel version: 1126 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Valves Valves Range: 1126 Gate Valve Handwheel PN32 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1126 3 3 3 3 x x x x x
Valve Suitability
1126 Temp (°C) bar psi Water -10°C to + 100°C PN32 at 186°C PN14
Max. working parameters
Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.
Bronze non-rising stem.
Handwheel operated.
Bronze threaded bonnet.
Bronze one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
14
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• High quality bronze construction suitable for pressure of up to 32 bar.
• Designed in accordance with DIN 50930-6 CC499K.
• Threads according to BS EN 10226.
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1126
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112620RRW320404 1/2" 15 55 85 0.36112620RRW320606 3/4" 20 60 95 0.69112620RRW320808 1" 25 70 115 1.02112620RRW321010 1 1/4" 32 75 125 1.57112620RRW321212 1 1/2" 40 80 145 2.44112620RRW321616 2" 50 90 165 3.43112620RRW322020 2 1/2" 65 100 210 -112620RRW322424 3" 80 115 240 -112620RRW323232 4" 100 135 290 -
Valves
This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
Valves Range 1130 Globe Valve Resilient Seat PN32
Material Specification
Handwheel version: 1130 - 1/2" - 4"
No Component Material Specification 1 Handwheel Aluminium EN 1706 LM6 2 Rating Disc Aluminium EN 1706 LM6 3 Handwheel Nut Brass BS EN 12165 CW617N-DW 4 Stem Bronze BS EN 1982 CC491K 5 Packing Nut Bronze BS EN 12165 CW617N-DW 6 Packing PTFE PTFE 7 Bonnet Bronze BS EN 1982 CC491K 8 Core DZR Brass BS EN 12164 CW602N 9 Bonnet Washer Brass BS EN 12165 CW617N-DW 10 Body Bronze BS EN 1982 CC491K 11 Seat PTFE PTFE 12 Core retention Nut Brass BS EN 12165 CW617N-DW 13 Seat Nut Brass BS EN 12165 CW617N-DW
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Valves Valves Range: 1130 Globe Valve Resilient Seat PN32
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1130 3 3 3 3 3* 3* 3* 3* x*Limited to 10 bar.
Valve Suitability
1130 Temp (°C) bar psi
Water -10°C to + 100°C PN32
Water at 196°C PN14
Gas -10°C to + 60°C PN5
Max. working parameters
Specification Clause:Globe Valve manufactured in accordance with BS 5154: 1991 Series B, PN32.
End Connections are Taper threaded to BS EN 10226-2 (ISO 7-1).
Design incorporates a replacable resilient seat disc retained on the stem by a nut.
Body seat is integral to the body.
Handwheel operated.
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Sat
urat
ed s
team
Temperature oC100 186
0 30 60 90 120 150 180 210
14
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Provides accurate regulations and control of flow.
• Rising stem design.
• High quality bronze construction.
• Robust and compact design.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Globe Valve - 1130
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
113020RRW320404 1/2" 15 60 95 0.30113020RRW320606 3/4" 20 65 100 0.54113020RRW320808 1" 25 80 115 0.84113020RRW321010 1 1/4" 32 90 135 1.36113020RRW321212 1 1/2" 40 100 155 1.76113020RRW321616 2" 50 120 174 2.97113020RRW322020 2 1/2" 65 145 - 4.14113020RRW322424 3" 80 200 - 5.68113020RRW323232 4" 100 - - -
Valves
This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.
Valves Range 1131 Globe Valve – Metal to Metal Seat PN32
Material Specification
Handwheel version: 1131 - 1/2" - 4"
No Component Material Specification 1 Handwheel Aluminium EN 1706 LM6 2 Rating Disc Aluminium EN 1706 LM6 3 Handwheel Nut Brass BS EN 12165 CW617N-DW 4 Stem Bronze BS EN 1982 CC491K 5 Packing Nut Bronze BS EN 12165 CW617N-DW 6 Packing PTFE PTFE 7 Bonnet Bronze BS EN 1982 CC491K 8 Core DZR Brass BS EN 12164 CW602N 9 Bonnet Washer PTFE PTFE 10 Body Bronze BS EN 1982 CC491K
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Valves Valves Range: 1131 Globe Valve – Metal to Metal Seat PN32
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1131 3 3 3 3 3 x x x x
Valve Suitability
1131 Temp (°C) bar psi
Water -10°C to + 100°C PN32
Water at 196°C PN14
Max. working parameters
Specification Clause:Globe Valve manufactured in accordance with BS 5154: 1991 Series B, PN32.
End Connections are Taper threaded to BS EN 10226-2 (ISO 7-1).
Design incorporates a metal seat disc retained on the stem.
Body seat is integral to the body.
Handwheel operated.
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Sat
urat
ed s
team
Temperature oC100 186
0 30 60 90 120 150 180 210
14
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with BS 5154.
• Designed in accordance with WRAS requirements.
• Provides accurate regulations and control of flow using a rising stem design.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Globe Valve - 1131
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
113120RRW320404 1/2" 15 60 95 0.31113120RRW320606 3/4" 20 65 100 0.54113120RRW320808 1" 25 80 115 0.84113120RRW321010 1 1/4" 32 90 135 1.36113120RRW321212 1 1/2" 40 100 155 1.76113120RRW321616 2" 50 120 174 2.62113120RRW322020 2 1/2" 65 145 - 4.14113120RRW322424 3" 80 200 - 5.68113120RRW323232 4" 100 - - -
Valves
Scale and dirt can cause problems and damage to equipment installed in pipe systems. The installation of Conex Strainers will assist in reducing problems which might occur due to extraneous matter in pipe runs. Conex Strainers are a low cost investment ensuring a rapid return as they will assist in reducing system downtime and lowering maintenance costs.
1802 - 1/2" - 4"
No Component Material Specification 1 O - Ring EPDM EN 2430:1995 2 Blanking Plug DZR Brass BS EN 12164 CW602N 3 Rating Disc Aluminium EN 1706 LM6 4 Washer PTFE PTFE 5 Cap Brass BS EN 12165 CW617N-DW 6 Filter Screen Stainless Steel BS.ISO.15510 7 Body Brass BS EN 12165 CW617N-DW
Valves Range 1802 Y Pattern Strainer PN16 (Brass)
Y Pattern Strainer - 1802
Order Code
BS EN 10226 (ISO 07) threadSize DN A B
Weight (kg)
180210RR0160404 1/2" 15 65 42 0.152180210RR0160606 3/4" 20 75 50 0.246180210RR0160808 1" 25 90 56 0.358180210RR0161010 1 1/4" 32 110 65 0.584180210RR0161212 1 1/2" 40 120 75 0.868180210RR0161616 2" 50 135 90 1.270180210RR0162020 2 1/2" 65180210RR0162424 3" 80180210RR0163232 4" 100
Valves Valves Range: 1802 Y Pattern Strainer PN16 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1802 x 3 3 3 3 x x x x
Valve Suitability
1802 Temp (°C) Bar psi
Water -10°C to + 120°C PN16
Max. working parameters
Specification:Brass Body.
Stainless Steel SS304 Screen.
Brass screw in Cap.
End connections to BS EN 10226 (ISO7) or to ISO228.
Pressure rating PN16 16 bar -10 to +100 degrees C. 7 bar At 170 degrees C.
Test pressure 24 bar hydraulic.
• The fluid to be transported is limited to Group 2 liquids i.e. non-hazardous and on no account should these valves be used for any Group 2 Gases, Group 1 Liquids or Group1 Gases.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
7
100 170
0 30 60 90 120 150 180 210
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Streamlined design in order to minimise pressure drop.
• Stainless steel mesh.
• Robust and compact design.
• Drilled and tapped for test point bosses available to order.
• Threads in accordance with BS EN 10226 (ISO7).
Valves
Scale and dirt can cause problems and damage to equipment installed in pipe systems. The installation of Conex Strainers will assist in reducing problems which might occur due to extraneous matter in pipe runs. Conex Strainers are a low cost investment ensuring a rapid return as they will assist in reducing system downtime and lowering maintenance costs.
1804 - 1/2" - 4"
No Component Material Specification 1 O - Ring EPDM EN 2430:1995 2 Balancing Plugs DZR Brass BS EN 12164 CW602N 3 Rating Disc Aluminium EN 1706 LM6 4 Washer PTFE PTFE 5 Cap Bronze BS EN 1982 CC491K 6 Screen Stainless Steel BS.ISO.15510
7 Body Bronze BS EN 1982 CC491K
Valves Range 1804 Y Pattern Strainer PN16 (Bronze)
Y Pattern Strainer - 1802
Order Code
BS EN 10226 (ISO 07) threadSize DN A B
Weight (kg)
180420RR0160404 1/2" 15 65 42 0.21180420RR0160606 3/4" 20 75 50 0.32180420RR0160808 1" 25 90 56 0.48180420RR0161010 11/4" 32 110 65 0.76180420RR0161212 11/2" 40 120 75 1.00180420RR0161616 2" 50 135 90 1.61180420RR0162020 2 1/2" 65180420RR0162424 3" 80180420RR0163232 4" 100
Valves Valves Range: 1804 Y Pattern Strainer PN16 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1804 x 3 3 3 3 x x x x
Valve Suitability
1804 Temp (°C) Bar psi
Water -10°C to + 100°C PN16
Max. working parameters
Specification:Bronze Body.
Stainless Steel SS304 Screen.
Bronze screw in Cap.
End connections to BS EN 10226 (ISO7).
Pressure rating PN16 16 bar -10 to +100 degrees C. 7 bar At 170 degrees C.
Test pressure 24 bar hydraulic.
• The fluid to be transported is limited to Group 2 liquids i.e. non-hazardous and on no account should these valves be used for any Group 2 Gases, Group 1 Liquids or Group1 Gases.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
7
100 170
0 30 60 90 120 150 180 210
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Integral test bosses allows for measurement of flow.
• Suitable for LTHW and chilled systems.
• Available with drilled and tapped bosses to order.
• Bronze body with streamlined internal contour to minimise pressure drop across valve.
• Stainless steel screen.
• Threads to BS EN 10226 (ISO7).