VAIBHAV RANGRAO PATIL

84 b Patil Galli, A/P - Red, Tal- Shirala, Dist- Sangli,(MH) - 415408Contact: +91 9405327999 (OR) +91 8806635502; Email: r.vaibhavpatil@gmail.com

WORK EXPERIENCE

Working as Maintenance Engineer MAKJAI LABORATARIES PVT. LTD. Kolhapur, From JAN 2016 to Present.

RESPONSIBILITIES: Responsible for maintaining and repairing heavy equipment required in the day to

day working

Analysis of machine failures

Estimation of maintenance costs

Assessing the needs of equipment replacements, spare parts

Assessment of the required tools for the maintenance of the equipment

Adopt and implement a detailed maintenance plan to minimize failures resulting in

stoppage of work

Preventive Maintenance to all the Machines on Weekly, Monthly And Quarterly

Basis

EDUCATIONAL CREDENTIALS

B.E. (Mechanical), 2015Rajarambapu Institute of Technology, Rajaramnagar (Sangli), Shivaji University; 58.82%

Higher Secondary School, 2009Vidyamandir Junior College, Islampur (Sangli); 62.00%

Senior Secondary School, 2007New English School, Shirala (Sangli); 78.76%

Software Proficiency Auto-CAD. CATIA

Industrial Training

Training at Hematic Motors Pvt. ltd., Karad.

Projects Undertaken

Design Modification in Armature Shaft Molding Die sponsored by ‘Kulkarni Power Tools Ltd.’ (KPT).

Problem Statement: Armature shaft moulding machine is used to form coating on ‘Armature Shafts’ of

various dimensions. Different die was required for different dimension of shaft. For

each new slot of shaft die has to be changed. Thus, it requires lot of human effort to

change die having weight approximately 500kg and after changing it has to be

heated to 1500 C. This whole process takes about 2 hrs, which implies lot of

production loss. Thus, main objective of project is to find feasible solution in order

to minimise production loss and human effort.

Provided solution:

A die of larger size was considered as fixed die. Then sleeves having outer

dimensions similar to fixed die and inner dimensions similar to shaft are modelled

in Pro-E. These sleeves are attached to one plate, which only have to change at the

time of shaft slot change.

This panel, with sleeves, may have weight approximately 2 kg. Thus one man

can lift it easily. Since the larger die is fixed on machine it will take hardly 10 to 15

min to heat sleeves to 1500. Sleeves for each shaft size can be manufactured and

used. Thus this solution fulfils both requirements.

Extra-Curricular Activities

Worked as a Co-ordinate of culture Committee in 2013. “KART – FORCE” Event Head in TRAILBLAZER 2012-13

Member of Program Committee of National level Technical Symposium Quantum 2012

Founder and Committee member of Student Development Association in R.I.T

Worked as member of Program Committee of MESA for 2011-12 Worked as Secretary of

Treasure Committee of MESA for 2010-11

Co-curricular achievements

Secured 1st prize in National level Technical Event ‘Cannon-shot’ in Vertex2011 held at Walchand Collage of Engineering, Sangli

Winner of R.I.T. ‘Cultural Festival 2013’

Participated in various Technical events like Khymera2010, Déjà vu etc. &

achieved prizes in sports

Secured Scholarship of Secondary School Scholarship exam 2004

Personal Information Date of birth: 10th July 1992.

Gender: Male

Nationality: Indian.

Marital Status : Single

Language Proficiency: English, Hindi , Marathi

Hobbies: Writing, Drawing sketch

I hereby declare that the above furnished details are fully true to the best of my

knowledge and belief.

Date : / /

Place :(Vaibhav Rangrao Patil)