VACUUM TWEEZERS FOR ULTRA CLEAN HANDLINGground connection is by three wire power cord, and a push-button release vacuum pick-up handle (VVP-200-2.5MM). $ 463.00 price each Foot Switch

VACUUM TWEEZERS FORULTRA CLEAN HANDLING

Phone: 1-800-530-8377 For our complete line of tools and accessories, visit our online store at www.virtual-ii.com Email: [email protected] Catalog PUR-A 1

Photos are not to scale. Prices subject to change without notice.

TWEEZER-VAC® ELITE Vacuum Tweezer Kits

TWEEZER VAC® ELITE KitsThe TWEEZER-VAC® ELITE was developed as a result of customer concerns about firmly grasping critical components and not droppingthem due to a vacuum leak. This vacuum tweezer uses an integrated ten segment bar-graph-display visibly shows the vacuum level presentduring operation. The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graphdisplays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a user replaceable inlet filter thatprotects operation of the tool from dust particles.• 5 feet of coiled vacuum hose (VCH-2.5MM-5-BLK).• A set of ten vacuum tips (VCS-10-PUR).• Five vacuum tip holders on top of tool.• A vacuum pick-up handle (VVP-200-2.5MM).• Bar graph power-on and vacuum-level indicator.• Rubber no-skid feet.TV-1500-PUR10-110 The TWEEZER-VAC® ELITE 110 or 220 volts models come complete with the following accessories/features: 5 feet of TV-1500-PUR10-220 coiled vacuum hose (VCH-2.5MM-5-BLK), a set of ten PUREACLEAN™ blue, non-marking vacuum cups (VCS-10-PUR),

ESD ground connection is by three wire power cord, and a push-button release vacuum pick-up handle (VVP-200-2.5MM).$ 399.00 price each

ADJUST-A-VAC KitsThe ADJUST-A-VAC was developed as a result of customer concerns about manual handling of very thin/delicate substrates, wafers, MEMSdevices and other very fragile components. This vauum-tweezer allows the operator to adjust the vacuum level from just below atmosphericpressure to up to ten inches of mercury depending on the fragility of the part being handled. An integrated ten segment bar-graph-displayvisibly shows the vacuum level present during handling operations. The bar graph will show minmum vacuum pressure until a part is graspedand then the bar graph displays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a userreplaceable inlet filter that protects operation of the tool from dust particles. • Adjustable knob for vacuum level.• 5 feet of coiled vacuum hose (VCH-2.5MM-5-BLK).• A set of ten vacuum tips (VCS-10-PUR).• Five vacuum tip holders on top of tool.• A vacuum pick-up handle (VVP-200-2.5MM).• Bar graph power-on and vacuum-level indicator.AV-5000-PUR10-110 The ADJUST-A-VAC 110 or 220 volts models come complete with the following accessories/features: 5 feet of coiled AV-5000-PUR10-220 vacuum hose (VCH-2.5MM-5-BLK), a set of ten PUREACLEAN™ blue, non-marking vacuum cups (VCS-10-PUR), ESD

ground connection is by three wire power cord, and a push-button release vacuum pick-up handle (VVP-200-2.5MM).$ 463.00 price each

Foot Switch With Vacuum Pen For Use With The TWEEZER VAC® Elite and ADJUST-A-VACIncludes a foot switch and a vacuum pen with no control hole. This product requires a continuous vacuum source.VFS-2.5 Foot switch and a vacuum pen with no control hole. $ 57.20 price each

• ESD ground connection is by three wire power cord included.• Produces vacuum of up to ten inches of mercury.• Whisper-quiet operation. • Long-life pump.• Optional: Foot switch for component release. See below.

ADJUST-A-VAC Vacuum Tweezer Kits

AV-5000 ADJUST-A-VAC

TV-1500 TWEEZER VAC® ELITE

• Rubber no-skid feet.• ESD ground connection is by three wire power cord included.• Produces vacuum of up to ten inches of mercury.• Whisper-quiet operation. • Long-life pump.• Optional: Foot switch for component release. See below.

Phone: 1-800-530-8377 For our complete line of tools and accessories, visit our online store at www.virtual-ii.com Email: [email protected] Catalog PUR-A2

TV-1000 Vacuum Tweezer Kits

TV-1000 TWEEZER VAC® KitsThis compact unit will handle a wide variety of parts used in industry today. The long-life diaphragm vacuum pump generates up to 10 inchesof mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. The TV-1000 comescomplete with the following features:• Lighted On/Off switch. • Whisper-quiet operation. • Long-life pump. • A set of seven PUREACLEAN™ vacuum tips, (VCS-7B-PUR).• A push-button release vacuum pick-up handle, (VVP-200).TV-1000-PUR-110 The TWEEZER-VAC® 110 or 220 volts models come complete with the following accessories/features: 5 feet of coiled TV-1000-PUR-220 vacuum hose 1/16" diameter (VCH-1/16-5), a set of seven PUREACLEAN™ blue, non-marking vacuum cups

(VCS-7B-PUR), and a push-button release vacuum pick-up handle (VVP-200). $ 250.20 price each

TV-1000 TWEEZER VAC® Kits With Small Parts TipsThis compact unit will handle a wide variety of parts used in industry today. The long-life diaphragm vacuum pump generates up to 10 inchesof mercury with an open air flow of 2.3 lpm. The unit connects to ground automatically with a three-wire power cord. The TV-1000 comescomplete with the following features:• Available in 110 or 220 volt models.• Lighted On/Off switch.• Whisper-quiet operation.• Long-life pump.• Push-button release vacuum pick-up handle (VVP-200).• A set of eight Delrin small parts tips (VSPT-KIT-8-BD).• A set of seven PUREACLEAN™ vacuum tips, (VCS-7B-PUR).TV-1000-SP8-PUR-110 The TWEEZER-VAC® 110 or 220 volts models come complete with the following accessories/features: 5 feet of coiledTV-1000-SP8-PUR-220 vacuum hose 1/16" diameter (VCH-1/16-5), a push-button release vacuum pick up handle (VVP-200), a set of seven

PUREACLEAN™ blue, non-marking vacuum cups (VCS-7B-PUR), a set of eight Delrin small parts tips (VSPT-TIPS-8-BD), and a 16 position tip organizer/holder (VTH-16). $ 491.20 price each

Replacement Bent Vacuum Tip KitsThis kit contains seven bent probes with 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), 3/8” (9.53mm), 1/2” (12.70mm), 5/8” (15.88mm),and 3/4” (19.05mm) cups.VCS-7B-PUR Replacement bent probe/cup PUREACLEAN™ blue, non-marking vacuum cups $ 41.30 price each

• 5 feet of coiled vacuum hose, 1/16” diameter, (VCH-1/16-5). • Rubber no-skid feet. • Side mounted handle holder. • Foot print measures 7-1/4” X 3” X 2-1/2” (185mm X 76mm X 64mm).

• Vacuum tips holder with sixteen locations (VTH-16).• Produces vacuum of up to 10 inches of mercury.• Rubber no-skid feet.• Side mounted handle holder.• Foot print measures 7-1/4" X 3" X 2-1/2" (185mm X 76mm X 64mm).


TV-1000-PUR-110 and TV-1000-PUR-220

TV-1000-SP8-PUR-110 and TV-1000-SP8-PUR-220


SMD-VAC™-HP Vacuum Tweezer Kits

SMD-VAC™-HPSMD-VAC™-HP, runs on 12 VDC @ 500mA w/ solenoid. With a precision pump and motor that generates up to 15 inches of mercury; this toolprovides additional pick-up power for handling small to very large size components. The compact tower design takes up a very small footprinton the bench. An electric eye pen holder on the side automatically shuts the unit off when the vacuum pen is placed in it. A jack on the rear ofthe V8100A series allows use of the optional foot switch to control vacuum during pick and place operations. The SMD-VAC™-HP comescomplete with the following features:• Quiet operation.• 5 feet of coiled vacuum hose, (VCH-1/16-5).• A set of seven PUREACLEAN™ vacuum tips, (VCS-7B-PUR).• A vacuum pick-up handle, (VVP-200).• 12 volt DC power source.• Lighted power on indicator.V8100A-PUR SMD-VAC™-HP for 110 or 220 Volts $ 462.10 price eachV8100A-FS-PUR SMD-VAC™-HP with foot switch, for 110 or 220 Volts $ 510.50 price each

SMD-VAC™-HP Small Parts KitSMD-VAC™-HP, runs on 12 VDC @ 500mA w/ solenoid. With a precision pump and motor that generates up to 15 inches of mercury; this toolprovides additional pick-up power for handling small to very large size components. The compact tower design takes up a very small footprinton the bench. An electric eye pen holder on the side automatically shuts the unit off when the vacuum pen is placed in it. This kit includes 5feet of coiled vacuum hose 1/16" diameter (VCH-1/16-5), a set of seven PUREACLEAN™ vacuum tips (VCS-7B-PUR), a push-button releasevacuum pick-up handle (VVP-200), Foot Switch (VFS-1), a set of eight Delrin small parts tips (VSPT-TIPS-8-BD), a 16-position tiporganizer/holder. (VTH-16), and a wall power supply for operation.• Quiet operation.• 5 feet of coiled vacuum hose, (VCH-1/16-5).• A set of eight Delrin small parts tips (VSPT-KIT-8-BD).• A set of seven PUREACLEAN™ vacuum tips, (VCS-7B-PUR).• Vacuum tips holder with sixteen locations (VTH-16).• A vacuum pick-up handle, (VVP-200).• 12 volt DC power source.V8100A-SP8-PUR SMD-VAC™-HP Small Parts Kit without foot switch, for 110 or 220 Volts $ 655.80 price eachV8100A-FS-SP8-PUR SMD-VAC™-HP Small Parts Kit with foot switch, for 110 or 220 Volts $ 710.70 price each

Intake Replacement FiltersThis is a replacement for the hose-barb feed-thru filter. Just unscrew the hose-barb feed-thru on the front of the unit and replace the filter.VF-FT-FILTER-40M Feed-Thru Filter 40 Micron, includes a set of five replaceable filters. $ 40.00 price each

• Automatic vacuum pump ON/OFF control.• Rubber no-skid feet.• Grounding connection on rear of unit.• Produces vacuum of up to fifteen inches of mercury.• Auto voltage switching DC power supply.• Replaceable intake filter on front of unit.

• Lighted power on indicator.• Automatic vacuum pump ON/OFF control.• Rubber no-skid feet.• Grounding connection on rear of unit.• Produces vacuum of up to fifteen inches of mercury.• Auto voltage switching DC power supply.• Replaceable intake filter on front of unit.


V8100A-PUR and V8100A-FS-PUR

V8100A-SP8-PUR and V8100A-FS-SP8-PUR


PAC-VAC®PAC-VAC® vacuum tool kit, battery operated. The PAC-VAC® is battery operated and self-contained, runs up to eight hours continuously onone 9 volt alkaline battery. This versatile unit can be clipped to your belt or pocket for one-handed portable operation. This kit includes PAC-VAC®, 5 feet of coiled vacuum hose (VCH-1/16-5), a set of seven bent probes with 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), 3/8”(9.53mm), 1/2” (12.7mm), 5/8” (15.88mm) and 3/4” (19.05mm) PUREACLEAN™ blue, non-marking vacuum cups (VCS-7B-PUR), and a pushbutton vacuum pick-up handle (VVP-200). The PAC-VAC® comes complete with the following features:• Power on LED indicator.• A belt/pocket clip on the housing.• 5 feet of coiled vacuum hose, (VCH-1/16-5).• A set of seven PUREACLEAN™ vacuum tips, (VCS-7B-PUR).V3200-PUR7 PAC-VAC kit $ 237.70 price eachV3200-CLN-PUR7 PAC-VAC kit Clean room safe $ 352.80 price each

Push Button Vacuum Pen KitDesigned for picking up parts ranging from 1/8” (3.18mm) to several inches in size. This kit can be used with any of our luer slip tips. This kitis for the users who have an in-house vacuum system. This kit includes 5 feet of coiled vacuum hose (VCH-1/16-5), a set of seven bent probeswith 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), 3/8” (9.53mm), 1/2” (12.7mm), 5/8” (15.88mm) and 3/4” (19.05mm) PUREACLEAN™blue, non-marking vacuum cups (VCS-7B-PUR), Barbed fitting adapter (V3015-1/8-NPT) and a push button vacuum pick-up handle (VVP-200).Optional tips that can be used include our small part tips, the rigid delrin tips and our multiple cup tips. This product requires a continuousvacuum source.VV-PEN-KIT-PB-PUR Vacuum Pen kit $ 89.80 price each

Vacuum Pen Holder For PEN-VAC® And PRO-SERIES PEN-VAC®Bench mount holder with luer slip nubs to accommodate up to eight of our luer slip vacuum tips. Can be used with any of our vacuum handlesor vacuum pens. Helps protect the vacuum tips when not in use.VBM-3 Bench mount holder, holds up to eight luer slip vacuum tips $ 56.00 price each


Vacuum Pen with Rigid Tip 1.7" (43.18mm) Diameter For Large or Heavy Optics1.7” (43.18mm) lens tip mounted directly to a (VVP-200) vacuum handle with a 1/16” barbed hose fitting on the rear. This tool is for handlingextremely large and heavy lenses. The vacuum tip is mounted directly to a vacuum handle. No luer slip connection to come loose whenhandling lenses up to several pounds. This tip must be used with continuous vacuum systems only. Custom tip sizes are available, contactcustomer service for more information.VRT-1750-VVP200 Vacuum Pen with Rigid Tip $ 88.90 price each

PAC-VAC® Vacuum Tweezer System

• A vacuum pick-up handle, (VVP-200).• 9 volt disposable alkaline battery.• Lightweight - only 156 grams.• Produces vacuum of over ten inches of mercury.


CONTINUOUS VACUUM PENS AND ACCESSORIES

VACUUM PEN WITH RIGID TIP


SELF CONTAINED PEN-VAC® Vacuum Tweezer

PEN-VAC® Kit With 6 Probes + CupsPEN-VAC®, metal body kit with (3) bent and (3) straight probes with (2) each 1/4" (6.35mm), 3/8" (9.53mm), 1/2" (12.70mm) diameterPUREACLEAN™ blue, non-marking vacuum cups. These vacuum pens are ideal for handling residue sensitive items such as lenses or opticalfilters. No batteries required. Simply push the vacuum button, place the soft suction cup to the part to be handled, then release the button andthe part is firmly gripped. A second push of the button releases the part.V8901-HLM-PUR $ 72.00 price each

PRO-SERIES PEN-VAC® Kit With 6 Probes + CupsPEN-VAC PRO SERIES gray body, kit with (3) bent and (3) straight probes with (2) each 1/4" (6.35mm), 3/8" (9.53mm), 1/2" (12.70mm)diameter PUREACLEAN™ blue, non-marking vacuum cups. For handling residue sensitive items such as lenses or optical filters. Simply pushthe vacuum button, place the soft suction cup to the part to be handled, then release the button and the part is firmly gripped. A second push ofthe button releases the part.V8910-GR-HLM-PUR $ 52.80 price each

VACULA 3 Kit With Anti-Wobble Cone And 3/4" Vacuum CupOur most powerful self contained vacuum tweezer designed to handle residue sensitive items such as lenses or optical filters. The plunger inthe rear of the tool activates the vacuum, simply push the vacuum plunger, place the soft suction cup to the part to be handled, then release theplunger and the part is firmly gripped. A second push of the plunger releases the part. The VC-3-AW is provided with one PUREACLEAN™ blue,non-marking 3/4” (19.05mm) diameter vacuum cup, that slips onto a barbed anti-wobble fitting.VC-3-075-AW-PUR $ 72.50 price each

HANDI-VAC® Kit With 5 Probes + CupsHANDI-VAC® KIT, with (3) bent probes, (2) straight probes and (5) PUREACLEAN™ blue, non-marking vacuum cups; 1/8", 3/16", 1/4", 3/8" and1/2". Our vacuum-bulb type tools are the lowest cost pick-and-place tools available. These tools operate very similar to a tweezer. Simply squeezethe vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeezereleases the part.HV-KIT-II-PUR $ 28.00 price each

HANDI-VAC-2® With Anti-Wobble Cone And 3/4" Vacuum CupHANDI-VAC-2® with Anti-Wobble Tip and PUREACLEAN™ blue, non-marking 3/4" (19.05mm) Diameter vacuum cup. HANDI-VAC®-2 isdesigned to pick up larger parts and to minimize wobble. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled,then relax your squeeze and the part is firmly gripped. A second squeeze releases the part.HV2-075-AW-PUR $ 20.50 price each

BULB-VAC™ With Anti-Wobble Cone And 3/4" Vacuum CupBULB-VAC™ with Anti-Wobble Tip and PUREACLEAN™ blue, non-marking 3/4" (19.05mm) Diameter vacuum cup. BULB-VAC™ with larger aircapacity than HANDI-VAC® is designed to pick up larger parts and to minimize wobble. Overall dimensions are 3.4" (86.4mm) long by 1.46"(37.1mm) wide. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part isfirmly gripped. A second squeeze releases the part.BVJ-075-AW-PUR $ 26.80 price each

PRO-SERIES PEN-VAC® Vacuum Tweezer

SELF CONTAINED VACULA 3 Vacuum Tweezer

LOW COST BULB-VAC™ Vacuum Tweezer

LOW COST HANDI-VAC® Vacuum Tweezer


PUREACLEAN™ VACUUM CUPS

Non-marking PUREACLEAN™ Vacuum CupsThe vacuum cup material is PUREACLEAN™, a catalytically cured proprietary rubber compound. This cup material is ideally suited forhandling residue sensitive items such as lenses or optical filters. • Operating temperature limits (-65˚F - 480˚F) (-55˚C - 250˚C).• Electrical properties: Greater than 1013 Ohms.V9013-PUR 1/8” (3.18mm) diameter vacuum cup $ 3.60 price each

V9018-PUR 3/16” (4.76mm) diameter vacuum cup $ 3.60 price each






Complete Kit of 7 Non-marking PUREACLEAN™ Vacuum CupsKit of seven vacuum cups 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), 3/8” (9.53mm), 1/2” (12.70mm), 5/8” (15.88mm), and 3/4”(19.05mm). The vacuum cup material is PUREACLEAN™, a catalytically cured proprietary rubber compound. This cup material is ideally suitedfor handling residue sensitive items such as lenses or optical filters. • Operating temperature limits (-65˚F - 480˚F) (-55˚C - 250˚C). • Electrical properties: Greater than 1013 Ohms.V9000K7-PUR $ 30.50 price each

Dimensions in Inches (millimeters)PART # SIZE A B C OD ID PS E

V9013-PUR-* 1/8 0.125(3.18) 0.160(4.06) 0.180(4.57) 0.100(2.54) 0.060(1.52) 0.055(1.40) 0.035(0.89) 10

V9018-PUR-* 3/16 0.188(4.76) 0.175(4.45) 0.200(5.08) 0.130(3.30) 0.060(1.52) 0.055(1.40) 0.035(0.89) 25

V9025-PUR-* 1/4 0.250(6.35) 0.160(4.06) 0.200(5.08) 0.120(3.04) 0.060(1.52) 0.055(1.40) 0.035(0.89) 60

V9038-PUR-* 3/8 0.375(9.53) 0.190(4.83) 0.250(6.35) 0.125(3.18) 0.060(1.52) 0.055(1.40) 0.035(0.89) 150

V9050-PUR-* 1/2 0.500(12.70) 0.190(4.83) 0.300(7.62) 0.160(4.06) 0.060(1.52) 0.055(1.40) 0.035(0.89) 250

V9062-PUR-* 5/8 0.625(15.88) 0.175(4.45) 0.315(8.00) 0.160(4.06) 0.060(1.52) 0.055(1.40) 0.035(0.89) 400

V9075-PUR-* 3/4 0.750(19.05) 0.140(3.56) 0.320(8.13) 0.160(4.06) 0.060(1.52) 0.055(1.40) 0.035(0.89) 600

Lifting force is directly proportional to the vacuum level and the area of the vacuum cup being used.

LiftingCapacity in Grams @ 6” of Mercury



C

B

A

EID OD

(Probe stop)



PROBES WITH NON-MARKING PUREACLEAN™ VACUUM CUPS

Straight & Bent Probes With Vacuum CupsThe vacuum cup material is PUREACLEAN™, a catalytically cured proprietary rubber compound. This cup material is ideally suited forhandling residue sensitive items such as lenses or optical filters.

V8908-S-B Bent 1/2” (12.7mm) probe with 1/8” (3.18mm) vacuum cup $ 5.10 price each

V8908-P-B Bent 1/2” (12.7mm) probe with 3/16” (4.76mm) vacuum cup $ 5.10 price each

V8908-M-B Bent 1/2” (12.7mm) probe with 1/4” (6.35mm) vacuum cup $ 5.10 price each

V8908-L-B Bent 1/2” (12.7mm) probe with 3/8” (9.53mm) vacuum cup $ 5.10 price each

V8908-H-B Bent 1/2” (12.7mm) probe with 1/2” (12.7mm) vacuum cup $ 5.10 price each

V8908-J-B Bent 1/2” (12.7mm) probe with 5/8” (15.88mm) vacuum cup $ 8.90 price each

V8908-K-B Bent 1/2” (12.7mm) probe with 3/4” (19.05mm) vacuum cup $ 8.90 price each

V8908-S-S Straight 1/2” (12.7mm) probe with 1/8” (3.18mm) vacuum cup $ 5.10 price each

V8908-P-S Straight 1/2” (12.7mm) probe with 3/16” (4.76mm) vacuum cup $ 5.10 price each

V8908-M-S Straight 1/2” (12.7mm) probe with 1/4” (6.35mm) vacuum cup $ 5.10 price each

V8908-L-S Straight 1/2” (12.7mm) probe with 3/8” (9.53mm) vacuum cup $ 5.10 price each

V8908-H-S Straight 1/2” (12.7mm) probe with 1/2” (12.7mm) vacuum cup $ 5.10 price each

V8908-J-S Straight 1/2” (12.7mm) probe with 5/8” (15.88mm) vacuum cup $ 8.90 price each

V8908-K-S Straight 1/2” (12.7mm) probe with 3/4” (19.05mm) vacuum cup $ 8.90 price each


Replacement Bent and Straight Vacuum Tip KitsThis kit contains five bent probes with 3/16” (4.76mm), 1/4” (6.35mm), 3/8” (9.53mm), 1/2” (12.7mm) cups and 3/4” (19.05mm) as well asfour straight probes with 3/16” (4.76mm), 1/4” (6.35mm), 3/8” (9.53mm), 1/2” (12.70mm) and 5/8” (15.88mm) cups.VCS-10-PUR Replacement bent and straight probe/cup PUREACLEAN™ blue, non-marking vacuum cups $ 55.90 price each

REPLACEMENT PROBES WITH PUREACLEAN™ VACUUM CUPS KIT


NON-MARKING DELRIN SMALL PARTS TIPS

Bent or Straight Delrin Small Parts Tips Delrin - temperature up to 212°F (100°C). These tips are designed for handling very tiny parts. Tips are made of Delrin plastic so there is nochance of static or mechanical damage. This product requires a continuous vacuum source.

VSPT0803-BD Bent 0.008" (.203mm) OD x 0.003" (.076mm) ID $ 39.90 price each

VSPT1005-BD Bent 0.010” (0.25mm) OD x 0.005” (0.13mm) ID $ 27.90 price each








VSPT0803-SD Straight 0.008" (.203mm) OD x 0.003" (.076mm) ID $ 39.90 price each

VSPT1005-SD Straight 0.010” (0.25mm) OD x 0.005” (0.13mm) ID $ 27.90 price each








Bent or Straight Rigid Handling TipsThese tips are designed for easy handling of optic lenses of all shapes and sizes. The deep cupped circular design will accommodate concave,convex and flat surfaces. Precision machined from Delrin insures contamination free lens handling. For lenses or optics that are smaller than 3.18mm (1/8”) see our small parts tips above. The following lens handling tips are mounted on a straightor bent 45° 1” (25.4mm) stainless steel probe with a luer slip hub. This product requires a continuous vacuum source.

VRT-125-B 1/8” (3.18mm) lens tip 45° bent probe VRT-125-S 1/8” (3.18mm) lens tip straight probe $ 24.50 price each






VRT-1000-B 1” (25.4mm) lens tip 45° bent probe VRT-1000-S 1” (25.4mm) lens tip straight probe $ 29.50 price each

RIGID DELRIN TIPS FOR OPTICS


ODID

1”(25.4mm)

30°

Delrin Tip

StainlessSteel

Zinc LuerFitting

2130 Victor PlaceColorado Springs, CO 80915 USA

Phone: 719-572-5566Toll Free: 800-530-8377Fax: 719-572-5504

Online Store: www.virtual-ii.comE-mail: [email protected]

Documents

VACUUM TWEEZERS FOR ULTRA CLEAN HANDLINGground connection is by three wire power cord, and a push-button release vacuum pick-up handle (VVP-200-2.5MM). $ 463.00 price each Foot Switch