7/28/2019 V7 & Higher SAS Note SN-012357_ _sam.S249.Ex.msg_
a Connectio...
1/2
higher SAS Note SN-012357: "sam.S249.ex.msg: A connection to ...
http://support.sas.com/techsup/unotes/SN/012/012
3/1/2006
support.sas.com>Technical Support --NavigateourSite--
6--NavigateourSite--
TS Home|Intro to Services|News and Info|Contact TS|Site
Map|FAQ|Feedback
SN-012357
"sam.S249.ex.msg: A connection to server host could not be
established on port 8591. Either there is no server listening
forconnections or the server is too busy to access any
newconnections."
When you test the Workspace server connection in the SAS
ManagementConsole (SMC), this error message might appear if the
Workspace serverhas not been added to the SASMain - Spawner
definition when youconfigured the Object Spawner in the New Server
Wizard.
Likewise, if the Stored Process server has been omitted, the
same errormessage might appear when testing its connection.
Solution:Add the Workspace server to the SASMain - Spawner
definition:
1. Open the SAS Management Console and expand Server Manager.2.
Locate SASMain - Spawner, right click, and select Properties.3.
Select the Servers tab (notice what is in 'Selected Servers':
you should see SASMain - Workspace server and SASMain -
StoredProcess server).
4. If either is not listed in 'Selected Servers', choose the
missingone from 'Available servers', move it to 'Selected Servers',
andchoose OK.
5. Then close the Object Spawner, stop and restart your
Metadataserver, start the Object Spawner and test the
connections.
Server connections can be tested by using Server Manager in the
SMC.
1. Expand Server Manager and expand SASMain.2. Expand SASMain -
Logical Workspace server.3. Click SASMain - Workspace server.4. In
the right pane, right-click on Connection: SASMain - Workspace
server.5. Choose Test Connection (log in, if necessary).6. If
successful, this message appears: Test Connection Successful!
This has also been seen when you did not start your Object
Spawner,before testing the Workspace Server. To start your Object
Spawner,perform the following:
Click Start>Programs>SAS>*ProjectName*\Start SAS Object
Spawner.
Product: Base SAS
Component: General System Issues
Priority: N/A
Note Type: Usage Issue
Date: Mon, 23 Jan 2006
Operating System and Source Fix Information
System Release Reported Release Fixed
7/28/2019 V7 & Higher SAS Note SN-012357_ _sam.S249.Ex.msg_
a Connectio...
2/2
higher SAS Note SN-012357: "sam.S249.ex.msg: A connection to ...
http://support.sas.com/techsup/unotes/SN/012/012
3/1/2006
Windows NT 9.1 TS1M0
Windows 2000 Datacenter Server 9.1 TS1M0
Windows 2000 Professional 9.1 TS1M0
Windows 2000 Server and Advanced Server 9.1 TS1M0
Windows 2003 Server and Advanced Server 9.1 TS1M0
Windows XP 9.1 TS1M0
Unless otherwise stated above, no fixes are available for this
issue.
Search|Contact Us|Terms of Use & Legal Information|Privacy
StatementCopyright 2006 SAS Institute Inc. All Rights Reserved.
