Upload
elton-cervera
View
59
Download
2
Tags:
Embed Size (px)
Citation preview
+ Spreader Adjusters: adds 2’ of adjustable width every 6”
+ Tamping Pads: safely and easily push the shield in the ditch
+ Leg Kit: puts the shield on 24” stilts for more pipe clearance
+ Corner Connectors: join two sidewalls together (90°)
+ Rigging Sling: 60° rating of 900 - 18,200 lbs.
+ T1 Trench Plate: put alongside shield to increase depth rating
+ Drop ‘Ons: attach to spreaders to give more coverage
+ Owners Manual: learn how to use and care for your V-Panel
Note: there are many more accessories available, just call and ask.
copyright (c) 2010 | kundel industries | all rights reserved p. 330.259.9009 | f. 330.259.9001 | www.kundel.com
24
System Kit Size(overall height) (height x length)
Weight(lbs)
6’ tall - V-Panel Kit
8’ tall - V-Panel Kit
10’ tall - V-Panel Kit
12’ tall - V-Panel Kit
6’ x 6’6’ x 8‘6’ x 10’6’ x 12’
C - soil ratingB - soil ratingA - soil rating
29’22’17’13’
67’50’38’28’
38’29’22’17’
841111813961638
1040133216301950
1280170321292552
1448192724092888
8’ x 6’8’ x 8‘8’ x 10’8’ x 12’
27’20’15’12’
61’44’31’24’
35’26’19’15’
29’23’18’14’
66’49’35’28’
38’29’22’17’
28’21’17’14’
62’45’31’26’
36’27’21’17’
10’ x 6’10’ x 8‘10’ x 10’10’ x 12’
12’ x 6’12’ x 8‘12’ x 10’12’ x 12’
- Kit and size information - note: many more kit options are available
Steel walers and patented panels (Patent # 7,611,908)Tough steel horizontal walers make up the skeleton of V-Panel kits. Each waler comes
standard with an internal locking system designed to be used with vertical sidewall panels
(V-panels). By unlocking the waler, it can vertically adjusted to allow for greater pipe
clearance. Attached to the walers are extruded aluminum V-Panels. Each panel can be
individually adjusted (up and down) without leaving the ditch. We recommend using the
V-Panel kit in pipe populated work areas.
Knife edges and pounding padsEach vertical panel comes standard with pounding pads and knife bottoms. Pounding pads
allow the V-Panel shield to be �rmly pressed into a ditch without damaging panels. Knife
bottoms aid this process by helping the panel cut into the dirt as you drive. Did you know
that knife bottom also keep your box straight as its being pushed down?
End Bracket & drop ‘onsEnd brackets attach spreader beams. Panels are then
attached to create drop ‘ons (see below). Use drop ‘ons and
close o� ends to create a safer working area.
spreader beam
exploded view
assembled view
unassembled view
end bracket
V-Panel Kit V-PANEL | Data Sheet
- Accessories for V-Panel -