Embed Size (px)
Citation preview
V-Gard Helmet SystemBecause your head deserves the best
Because every life has a purpose…
MSA also serves a wide variety of markets with a uniquerange of high performance helmets:
Fire and rescue helmets: with the unique Gallet F1 and•F2 ranges, MSA protects fire-fighters in more than80 countries worldwideLaw enforcement and ballistic helmets: supplying head•protection solutions to police and military around theglobeHelicopter and jet pilot helmets•
MSA has been in industrial helmets for over 50 years, and istoday the world leader for workers’ head protectionworldwide. The V-Gard product is a proven and a wellestablished brand, including the patented V shell design andtrademark. More than 120 Million helmets have been sold. TheV-Gard is the most recognised helmet in almost every regionwith the iconic “V“.
MSA – A global leader in Head Protection
MSAsafety.com
3
With the V-Gard series MSA offers four models givingperformance levels to optimally suit all major industrialapplications:
Oil, Gas and Petrochemicals•Utilities•Mining•Construction•Metal Processing•
Each helmet and its accessories provide a different level of protection and comfort.They should be selected depending on the hazards to which the wearer is exposed:
Prolonged or occasional use•Static or mobile use•Outdoor or indoor use•Exposure to falling objects•High temperatures•Liquid splashes•Exposure to electrical risks•Working at height•Confined spaces or low ceilings•Storage conditions, e.g. very low temperatures•
A risk analysis of the workplace and tasks is needed to ensure the correct and mosteconomic equipment is selected.
MSA V-Gard System – Applications and Needs
Industrial head protection: EN 397The aim of an industrial safety helmet is to protect the use against falling objects and consequently brain injury and skull fracture.
Mandatory tests
Optional testsEN 397 includes a number of optional tests on helmets where additional protection is claimed: very high(+150 °C) or very low (–30 °C) temperatures, splashes of molten metal, electrical voltages up to 440 V andlateral deformation. MSA also tested and certified products to Eurasian regulation following the GOSTstandard which are based on EN 397 test methods and with additional temperature performance such as –50 or +90 °C (depending on helmet model).
MSA high quality – high competencyMSA has operations on 6 continents, manufacturing high quality industrial helmets every minute, 365 daysa year.In MSA’s european center of competence for head protection in France, MSA has its own, internationallyaccredited and certified test laboratory. Right next to the production lines and Research and Developmentcenter, helmets for industrial workers, fire fighters, police, military and jet pilots are tested every day. Moderntechnology in conjunction with experience in high-tech head protection assure the highest quality standards.MSA helmets exceed standards requirements for various criteria and provide best-in-class resistance anddurability. For instance, penetration tests are always carried out after shock absorption to ensure continuityof protection.Modern production methods and quality programs ensure the conformity of all helmets produced.
Expertise, Approvals and Markings
Discover online ourexpertise and visit ourplant: use your smartphone and downloadthe following QR code
Impact absorption test
A 5kg round striker is•dropped onto the helmetfrom 1 meter
The maximum transmitted•force should not exceed5kN
Penetration test
A 3 kg pointed cone is•dropped onto the helmetfrom 1 meter
The striker should not•make contact with theheadform underneath thehelmet
Chinstrap anchorage
Initial 150 N applied, then•increased 20 N/ min untilfailure
Chinstrap anchorage•should release at aminimum force of 150 Nand no more than 250 N
Flame test
A burner pointing the•flame at 45° to any pointbetween 50 and 100 mmfrom the crown, during 10 seconds
No visible flame after •5 seconds
5
MSAsafety.com
Helmetshell
Storage time
(when helmet notused)
Service life(in addition to the
storage time)
HDPE
V-Gard 2 years +4 years
ABS
V-Gard 200 3 years +5 years
V-Gard 500 3 years +5 years
V-Gard 520 3 years +5 years
Nylon
ThermalGard 3 years +5 years
V-Gardsafe in
Electrical insulation approval: EN 397 440 V AC and EN 50365 1000 V AC
Antistatic testing for safe use in ATEX areas: EN 13463-1 As this risk is covered in the PPE directive, there is no related harmonised standard for PPE in explosive environments(ATEX), MSA selected the standard EN 13463-1 non-electrical equipment for use in hazardous areas to show suitability.
Lifetime guidelines for MSA industrial helmetsAs required by European regulations, MSA provides recommendation on industrial helmets service lifetime:
440 V AC from EN 397
This test is a current leakage test performed in 3 different•conditions to ensure there is no risk of the electrical currentbeing transmitted to the wearer in case a powered wire is incontact with the helmet. The voltage used for this test is 1200 V AC.
1000 V AC from EN 50365
Electrically insulating helmets for use on low voltage•installations.
They offer reliable protection against electric shock up to AC•1000 V or DC 1500 V. The voltage used for this test is 10 000 V.
MSA recommends writing the date of firstuse onto a sticker (supplied with eachhelmet) and then sticking into the shell.This is normally the point at which servicelife starts.
NOTE: the "date code" on the brim of yourMSA helmet is the date of manufacture(shell injection), not the actual startingdate of use, as the period betweenmanufacturing and actual distribution tothe worker can vary.
MSA solution for electriciansInsulated helmets and electric-arc protection visor and frame without any metal part
Certified according to eye and face protection standard EN 166, marking "8" - Short circuit electrical arc for •1.5 mm and 2.5 mm PC clear visors
V-Gard frame and moulded 2.5 mm PC visor have also been tested according to Class 1 (test with 4kA) for the •GS-ET-29 standard, supplementary requirements for the testing and certification of face shields for electricalworks.
EN 13463-1 for MSA helmetsPreventing electrostatic charge, all MSA V-Gard helmets aresuitable for use in ATEX environments.
Industry:•Dust: hazardous zones 20, 21, 22 (all zones) Gas: zones 1 and 2 with gas group IIA (Propane)
Mines: any type of extraction and any depth•
EN 13463-1 for MSA accessoriesTests have been done by the laboratory INERIS.
Dust only: PC and propionate visors•IIA/Dust: V-Gard helmets, lamp brackets, ear-muffs, frame, vinyle•stickers, chinguards
IIB/Dust: ChemPro goggle, textile stickers •IIC/Dust: Altimeter spectacles, chinstraps, knit cap•
Approvals
ModelDetails from page 8 to 9
Helm
et sh
ell m
ater
ial
Wei
ght (
incl
udin
g St
az-O
n)
Wei
ght (
inclu
ding
Fas-T
rac)
Peak
Rain
gut
ter
Vent
ilatio
n sy
stem
Colo
ur o
ptio
ns h
elm
et sh
ell
Susp
ensio
ns
EN 3
97 lo
w te
mpe
ratu
re
EN 3
97 la
tera
l def
orm
atio
n
EN 3
97 m
olte
n m
etal
EN 3
97 +
150°
C
EN 3
97 4
40 V
AC
V-GardThe ”all-round” helmet
HDPE 325 g 380 g Normal★★
Textile 4 points, 2 options: -Staz-On with slide
adjustment 52–62 cm;
- Fas-Trac with ratchetwheel adjustment
52–64 cm;
Fas-Trac with optionalleather sweatband or
optional foam andreplaceable sweatband
–30°C
V-Gard 200 ventedFunctional and stylish
ABS 315 g 370 g Short ★★
–30°C
V-Gard 200 non ventedFunctional and stylish
ABS 320 g 375 g Short ★★
–30°C
V-Gard 500 ventedComfort and protection
ABS 325 g 380 g Normal
★★
–30°C
V-Gard 500 non ventedFully featured for an unparalleledprotection
ABS 330 g 385 g Normal
★★
–30°C
V-Gard 520No peak safety helmet
ABS 315 g 370 g No peak ★★
–30°C
ThermalGardHigh temperature helmet
Nylon 450 g Normal ★Dedicated textile 4 points,
Fas-Trac with ratchet wheeladjustment 52–64 cm
–30°C
To easy get your individual helmet configuration, please use MSA configurator.* Marking added on demand
HDPE shell ABS shell
Key shell featuresFor the V-Gard helmet shells MSA uses either HDPE (HighDensity Polyethylene) or ABS (Acrylonitrile ButadieneStyrene).Both are UV stabilised materials.MSA’s HDPE shells offer good resistance to shocks. •MSA’s ABS shells have an higher resistance to shocks•and scratches and provide better lateral crushingprotection.
MSA also produces shells made with glass reinforcedpolyamide (Nylon) to offer better resistance to heatdeformation (+150 °C) and molten metal splash (MM).
MSA helmets are designed to have many options and canbe used with a wide range of accessories fully approved asan integrated head protection system.
V-Gard® – Head Protection System
Nylon shell
7
MSAsafety.com
Approvals OptionsDetails from page 10 to 13
Spare partsDetails on page 14
Accessories compatibilityDetails from page 15 to 27
EN 5
0365
(100
0 V
AC)
EN 1
3463
-1 a
ntist
atic
Eura
sian
appr
oval
s
Chin
stra
ps
Lam
p br
acke
t
Refle
ctiv
e st
icke
rs
Badg
e ho
lder
Logo
cust
omisa
tion
Swea
tban
ds a
ndsu
spen
sions
Fram
es a
nd v
isros
Ear-m
uffs
Win
ter l
iner
s, co
olin
g pa
dsan
d ne
ck ca
pes
Gogg
le a
ttach
men
t
Stow
-aw
ay e
ye p
rote
ctio
n
Zone
1, 2, 20, 21, 22
GOST-50°C
2-point
3-point(Fas-Trac)
Plastic front
Metal front
Plastic side
Sticker options:2 materials, 3 colours, 2 shapes
Zone 1, 2, 20, 21, 22
*Zone
1, 2, 20, 21, 22
Zone 1, 2, 20, 21, 22
Zone
1, 2, 20, 21, 22
Zone
1, 2, 20, 21, 22
2-point3-point
(Fas-Trac)4-point
GOST+150°C
2-point3-point
(Fas-Trac)
Key suspensions featuresWith over head straps made of woven polyester: it provides high comfort and long•term, consistent shock absorption performanceEnsure a consistent performance and comfort level even under the influence of•moisture or low temperaturesSophisticated 4 point attachment: good positioning, stability and better air•circulationPatented adjustment systems: Staz-On with slide and Fas-Trac with larger wheel•ratchet for quick adjustment even with glovesIdeal positioning of the harness through height and length adjustment: perfect•for use with full-face respiratory masksWipeable PVC sewn sweatband with possibility to order additional Terri-Band•sweatband (washable) for summer. For more comfort, leather sewn sweatbandavailable for Fas-Trac suspensionsPremium Fas-Trac version with ratchet cover and replaceable foam sweatband•
Staz-On harness Fas-Trac harness
■
■
■
■
■
■
■
■★
■★
GV X - 0 0 0 0 0 0 0 - Y Y YX X
V-Gard ★★Solid “all-round” helmet
The Original V-Gard, most popular style worldwide, >120 millions sold •Reliable, UV stabilised HDPE helmet shell•For many industrial applications the ideal and most economic solution•Antistatic testing according to EN 13463-1. Suitable for use in ATEX environments hazardous•zones 1, 2, 20, 21, 22Economic electrician helmet meeting EN 397 440 V AC and EN 50365 •GOST certified (-50°C)•
To easily get your individual helmetsconfiguration please ask for the electronicV-Gard configurator.
V-Gard 200★★Functional and stylish
Vented version UV stabilised ABS helmet shell offers good•resistance to scratchesLightweight•Stylish design•Short peak for improved upward vision•Effective ventilation system with larger•holes on the upper part: most ventilatedhelmet of the market with 445 mm² ofventilation holesLimited rain gutter•Provides lateral crushing protection•Antistatic testing according to EN 13463-1.•Suitable for use in ATEX environmentshazardous zones 1, 2, 20, 21, 22
Non vented version Benefits as described for vented version plus:
Ideal electrician helmet meeting •EN 397 440 V AC and EN 50365 1000 V AC(marking available on demand)
The V-Gard helmet range uses a specific part numbering system to enable each configuration to have aunique part number attached to it.
This part defines the shell, colour and suspension.
This part defines theoptions (see pages 10-11)
This part defines thelogo print
(see pages 12-13)
V-Gard® – Helmet Range
Shell
1. V-Gard 4. V-Gard 500 vented5. V-Gard 500 non vented6. V-Gard 200 vented7. V-Gard 200 non vented8. ThermalGard9. V-Gard 520
Colour
1.White2.Yellow3.Red4.Green5.Blue6.Orange7.Grey (only V-Gard 500)8.Black(only V-Gard 500)9.High Viz orangeA.High Viz yellow
Suspension
1. Staz-On2. Fas-Trac4. Fas-Trac leather5. Fas-Trac
ThermalGard6. Staz-On +
Terri-Band7. Fas-Trac +
Terri-Band 8. Fas-Trac
Thermalgard + Terri-Band
9. Premium Fas-Trac(foam/ratchet cover)
9
MSAsafety.com
V-Gard 500★★Comfort and protection
V-Gard 520★★Non vented peakless safety helmet for work at height or confined spaces
Selection of 2, 3 or 4 points chinstrap (not fitted onto the helmet)•UV stabilised ABS helmet shell offers good resistance to scratches•Provides lateral crush protection•Built-in rain gutter for outdoor operations•Ideal design for adapting ear-muffs, visors or attaching headband of MSA eyewear with•goggle adapterAntistatic testing according to EN 13463-1. Suitable for use in ATEX environments hazardous•zones 1, 2, 20, 21, 22Ideal electrician helmet meeting EN 397 440 V AC and EN 50365 1000 V AC•V-Gard 520 helmet can be delivered with a badge holder on the front (see page 10)•
ThermalGard★
Safety helmet for use in high temperature environments•Glass reinforced polyamide (Nylon) injected shell•High temperature resistance +150°C EN 397 and GOST option•Protection against molten metal•Provides lateral crush protection•Special Fas-Trac ThermalGard suspension with ratchet•Selection of high-temperature frame, visors and flame retardant winter liners•
Vented version UV stabilised ABS helmet shell offering•good resistance to scratchesProvides lateral crush protection•Built-in rain gutter for outdoor operations•Ideal design for adapting ear-muffs, visors•or attaching headband of MSA eyewearwith goggle adapterAntistatic testing according to EN 13463-1.•Suitable for use in ATEX environmentshazardous zones 1, 2, 20, 21, 22Ventilation holes on the upper part for•optimized airflowV-Gard 500 helmet can be delivered with a•badge holder on the front (see page 10)
Non vented version Benefits as described for vented version plus:
Ideal electrician helmet meeting •EN 397 440 V AC and EN 50365 1000 V AC
(1) (2)
(3) (4)
1. 3. 4. 5. 6. 7.
9.
A.
B. C.
GV Y Y YX X X X 0 0 X0 X
To easily get your individual helmet's configurationplease ask for the electronic V-Gard configurator.
ChinstrapsMSA chinstraps ensure a secure fit and stability.
Easy to attach and remove from the shell thanks to plastic hooks•Reliable, comfortable and adjustable•Zebra design using contrast colours for webbing versions: highly visible•3 point version is perfectly adapted for work at height and doesn’t interfere with the ear muffs•
All MSA chinstraps comply with the requirements of EN 397 when fitted in the appropriatemanner to our range of V-Gard industrial safety helmets.
Badge holder for V-Gard 500/520The robust badge holder at the front is highly valueable for industries or construction sites whenseveral operators are involved in the same work area. A business card, a magnetic access controlbadge or cards with worker specific “InCaseOfEmergency” information, authorisation and licencescan be inserted.
Transparent plastic embossed to avoid scratches damage•Robust and watertight for outdoor applications•Ultra sonic welding which resists a tearing test of more than 10 kg•
Must be ordered together with the helmet.
When you need more than just a helmet MSA offers you various options providing additional protection,comfort levels and adaptations for environmental conditions.
Part No Description
9100001 2 point chinstrap webbing (1)
B0259378 2 point chinstrap elastic (2)
101475593 point chinstrap webbing (valid for all helmets with a Fas-Trac as the 3rd point connectsto the suspension ratchet knob) (3)
10148055 4 point chinstrap webbing (only valid for V-Gard 520) (4)
GA8403 Chin piece (can be added to the 3 point chinstrap for additional stability)
V-Gard® – Options
Shell - Colour - Suspensions(see page 8-9)
This part defines the options
Stickers
(x2), vinyl(x2), vinyl(x2), textile(x2), textile(x2), textile(x2) +(x2), vinyl(x2) +(x2), vinyl(x2) +(x1 rear), vinyl(x2), vinyl(x2), vinyl
0. None
Lamp brackets and badge holder
0. No1. Plastic, front2. Metal, front3. Plastic, side4. Rear loop only5. Badge holder
Chinstraps
0. No1. 2 pts, webbing2. 2 pts, elastic3. 3 pts, webbing
(with Fas-Tracsuspensions only)
4. 4 pts, webbing
Eye Protection
0. No1. Clear Stow-away2. Smoke Stow-away
Logo Configuration
000. No logoYYY. SpecificOne logo code perlogo configurationon the helmet (up to4 logos on 1 shell)
11
(1)
(2)
(3) (4)
(1)
(2)
(3)
MSAsafety.com
Reflective stickersIn many working conditions wearing high-visibility clothes is mandatory. The MSA stickersincrease the visibility of the wearer, especially when used in low light conditions to increase thecontrasts (when illuminated by a light source, such as headlights).
EN 471 compliant•Durable material•Available in various colours, materials and shapes:•Straight or curved (better visibilty from the top for applications such as crane driver and•workers on the ground)Vinyl (economic) or textile (premium quality)•Orange, grey or yellow•
MSA reflective stickers can be mounted within the production process (see the configuratoron page 10) or can be ordered separately as an accessory (with the following part numbers):
Other specials configurations available (please contact us): Rear loop only: retention clip transparent in the rear•Metal lamp bracket for helmet front, without rear loop•Plastic lamp bracket for helmet front, without rear loop•Metal lamp bracket front and plastic lamp bracket fixed on the right side of the helmet•Badge holder in front, plastic lamp bracket fixed on the right side of the helmet•
Type Yellow Orange Silver
Stickers (2 pcs) straight, vinyl (1) GA90002-JO N/A GA90002-BO
Stickers (2 pcs), curved, textile (2) GA90001-JO GA90001-RO GA90001-BO
Stickers (2 pcs) curved, vinyl (3) GA90003-JO N/A GA90003-BO
Lamp attachmentsMSA offers 3 optional lamp brackets which are mounted in the production process (so need tobe ordered with the helmet): plastic front, metal front, plastic side (MSA offers ATEX lamps - XS,XP LED and XP Xenon).V-Gard and V-Gard 500 with the plastic lamp brackets keep their electrical insulation (EN 397 440 V AC) and antistatic properties.
Part No Description
Options when ordering a helmet
Plastic lamp bracket for helmet front, black retention clip in the rear (1)
Metal lamp bracket for helmet front, transparent retention clip in the rear (2)
Plastic lamp bracket fixed on the right side of the helmet, for MSA PELI lamps (XS, XP, XP LED) (3)
GA1466 Lamp XS, LED, ATEX Zone 0 (only for plastic side bracket) (4)
GA1457 Lamp XP, Xenon, ATEX Zone 1 (only for plastic side bracket)
GA1464 Lamp XP LED, ATEX Zone 0 (only for plastic side bracket)
V-Gard® – Customisation Options
Express customisation process (1 week for•an existing logo)Top-quality printing, durable and weather-•provenUp to 4 logos per helmet can be printed•(front, rear, left, right). On V-Gard 500, logoon peak is also possible.Possible to print logo, pictures and text•Minimum order quantities start with 20•helmets
Pad printing serviceMSA integrated process includes made in France clichés/plates, ink mixture,production
2 colour technologies:•- Pantone: solid colour or colour gradient,
up to 8 colours per logo- Image 2000™ Service: Unique feature of
MSA logoexpress premium printing 4Cprocess, you can even print pictures or verycomplicated logos, relevant using highcolour. White background needed excepton white shells.
Logo customisation
Why to customise your helmet ?
To avoid logo distortion due to the curvature of the shell MSA's skilled graphic designers workon each logo individually to ensure an accurate representation of your logo !
Use PPE as a branding vector for the company on site•Strengthen the pride of your workers as a company or in a•communityPromote the safety image of your company•Spread messages to the workers eg. “Think Safety”•Promote a specific event such as "year of", "50 years of the•company…"
Identify your workers when they are operating on construction•sites along with other contractorsIdentify the particular status or function of the wearer such as•“Safety officer”, “Team Manager”, "Maintenance"Identify the first aid workers•
13
MSAsafety.com
Sticker approved with all MSA helmets duringpenetration and shocks tests, and after hot andcold conditioning.
Table with helmet models and dimensions per side
Individual namingMSA offers the front badge holder option to insert ID card and identify each worker on a site. If you prefer or need individual naming MSA providesyou with a cost effective solution to have the name of each user on an individual sticker. This allows individual traceability of the PPE.
How to proceed ?1. Just ask your local MSA contact to get the Excel form and provide us with•the list of your workers.
2. You will receive then the individual stickers easily applied by the end user when•the helmet is delivered.
Option available from 40 units (mixed names).
Logo Express easy processFor new logo:1. Select your helmets2. Send your vectorial logo (eps, ai, cdr) or
high resolution bitmaps (bmp, jpg, tif )with the info on 4C or pantone colourcode and logo size to your localdistributor.
3. Approve as soon as possible the validationform your distributor will send you within3 days.
4. MSA produces your logoed helmetswithin two weeks.
For existing logo:1. Just place the order with your dedicated
P/N (for each logo configuration: a dedicated P/N)
2. MSA produces your logoed helmetswithin 1 week
Please contact us for any specific requests such as bigger dimensions or different locations than standard ones, MSA integrated Logo Express department can support you with their expertise.
Models Peak Front Sides Rear
V-Gard N/A 60 x 90 mm 60 x 90 mm 60 x 90 mm
V-Gard 200 N/A 60 x 90 mm 60 x 90 mm 60 x 90 mm
V-Gard 500 30 x 30 mm 60 x 90 mm 60 x 90 mm 30 x 80 mm
V-Gard 520 N/A 60 x 90 mm 60 x 90 mm 30 x 80 mm
Validation form
(5)
(1) (2) (3) (4)
SweatbandsMSA helmets have suspensions with PVC or leather sewn sweatband. In hot environment or summer conditions, you can add a sweatband inwashable and reusable terrycotton to the PVC or leather one.MSA also offers a premium Fas-Trac suspension with foam replaceable sweatband and foam ratchet cover. There is one suspension with boththese options, but you can also order the parts separately.
Part No Description
10109261 Fas-Trac suspension with PVC sweatband sewn (1)
10109230 Staz-On suspension with PVC sweatband sewn (2)
10110605 Fas-Trac suspension with leather sweatband sewn (3)
GA90018 ThermalGard Fas-Trac suspension with PVC sweatband sewn
CH504431 Premium Fas-Trac suspension with foam replaceable sweatband and ratchet cover (4)
D6178016 Visitors cap non woven (5)
Part No Description
696688 Washable Terri-Band sweatband for all MSA suspensions
GA90030Sweatband with foam (10 pcs), fits all MSA suspensions with ahook/loop closure
GA90027Kit for MSA Fas-Trac Premium suspension: foam sweatband andfoam ratchet cover (10 pcs of each)
V-Gard 500 Fas-Trac with foamsweatband
Fas-Trac harness with Terri-Band
V-Gard® – Spare Parts
Suspensions spare partsFor hygienic reason and depending on user inspection, suspensions should be changed regularly. Also discover the visitor cap non woven accessorywhich can be used below all MSA suspensions.
15
MSAsafety.com
V-Gard accessory system is an integrated solution to protect your face, eyes, neck and chin. Frames, visorsand chin protectors have been designed and certified as a system with MSA helmets to ensure productcompatibility, a crucial component of compliance and safety. With its trully global platform, MSA offers idealprotection around the globe.
V-Gard Accessory System – Frames
V-Gard standard frame10121266
V-Gard standard frameElevated Temperature (ET)version10121267
V-Gard standard frame withdebris control10115730
Standard frame slotadaptor replacement10117496
Standard frames
V-Gard universal frame10121268
V-Gard universal frame, with debris control10115822
Universal frame heavy dutyrubber strap replacement10117495
Universal frames
V-Gard® – Face Protection
Slot adapters compatible with all MSA helmets and included in each•frame packageSuitable for electrical applications as standard frame contains no•metal partsSloped design makes it easy to clean the frame as rubbish just slides•off the frameWorks with or without ear muffs - Adapter is stowable in case you use•ear muffs, no more lost parts
Standard frames can be ordered with or without debris control•Replaceable debris control creates a tight seal between helmet and•frame reducing potential ingress of contaminantsElevated Temperature (ET) version designed to withstand•temperatures of 177 °C without warping, cracking or crazing
Heavy-duty, flat rubber strap allows easy and secure placement of•universal frame on a helmetPivot location leaves accessories slots open so that other safety•equipment like existing ear muffs can be usedSloped design makes it easy to clean the frame as rubbish just slide•off the frame
Universal frames can be ordered with or without debris control •Replaceable debris control creates a tight seal between helmet and•frame reducing potential ingress of contaminantsSuitable for electrical applications as universal frame contains no•metal parts
V-Gard Accessory System – Visors
Markings on frames and visors according to EN 166Filter class and scal number
Increases with decreasing luminous•transmittance through the visor:
Choosing the proper V-Gard visor
Material
Polycarbonate
Suitable for most applications where impact and splash hazards exist. Available in a variety of sizes and thicknesses, sheet orinjection moulded versions. Moulded visors are optically corrected and therefore offer very good view and reduce fatigueduring work. Their chemical and heat resistance is better as they are thicker and not as stressed as flat visors. Flat visors are theperfect solution for general and basic applications offering a good price/performance ratio.
Mesh Provides maximum ventilation in humid working conditions. Lightweight and durable great for outdoor applications such asbrush clearing and trimming. Does not provide splash protection.
Propionate Provides superior chemical splash resistance mainly against organic chemicals such as solvants. Available in injection mouldedversion for a great optical quality and reliable resistance not as stressed as flat visors.
Colour / Tint
Clear Provides maximum light transmission. Good for indoor use applications, or outdoor use in low-light conditions.
Green tint Helps alleviate eye strain and fatigue by reducing excessive glare and light transmittance. With Ultraviolet (UV) filter, great foroutdoor use in bright light conditions.
Shade 3 IR / Shade 5 IR
Helps protect against infrared (IR) up to Shade 3 and Shade 5, as applicable, as well as ultraviolet (UV) radiation. Perfect forautogenous welding, metal pouring, gas soldering, light cutting and brazing applications.
Coatings
Anti-fog Controls condensation build-up on inside of visor surface. Great for humid conditions.
Anti-scratch Provides excellent scratch resistance, extending visor life. A “must have” in abrasive work environments.
Reflective Reflects radiant heat, keeping the wearer comfortable in elevated temperature environments, such as manufacturing plantswith blast furnaces. Available in clear and green tint.
OptionsChin protectors V-Gard chin protectors provide additional protection to the face and neck from impacts, chemical splash and arc flash making
them suitable for applications in forestry, chemical industry, utilities, etc.
Debris control Provides additional protection against debris and chemical splash and reduces the possibility of debris or chemical entrybetween the visor frames and the front of the helmet.
V-Gard® – Face Protection
2 Ultra violet radiation
2-C UV radiation with enhancedcolour recognition
2C-1.2UV filter with enhanced colourrecognition, light transmission74.4% - 100% (UV EN 170)
2-2 UV filter, light transmission 29.1%- 43.2% (UV EN 170)
4-3 / 3 Shade 3 filter according to EN 171(IR) and EN 169 (welding)
4-5 / 5 Shade 5 filter according to EN 171(IR) and EN 169 (welding)
1 Highest optical quality forpermanent use
Optical quality
Mechanical strength
F High speed particles with lowenergy impact (45 m/s)
B High speed particles withmedium energy impact (120 m/s)
T Additional resistance at extremetemperatures (-5 and +55 °C)
Field of useOffers protection against:•
3 Liquid droplets and splash
8 Short circuit electric arc
9Non-adherence of molten metaland resistance to penetration ofhot solids
K Resistance to surface damage byfine particles
N Resistance to fogging
R Enhanced reflectance >60% inthe infrared (780-2000 nm)
17
MSAsafety.com
Chemical Family Representative Chemical
Polycarbonate clear flat sheet
(1-1.5 mm thick),uncoated
(10115836, 10115837,10115863, 10115840)
Polycarbonate clear flat sheet (1.5 mm thick),
coated(10154949, 10154950,10154961, 10154962)
Polycarbonatemoulded, clear (2.5 mm thick),
coated(10115844, 10115853,
10115845)
Propionate clearmoulded
(2.5 mm thick),uncoated
(10115851, 10115855,10115856)
Organic Chemicals
Alcohol Ethanol *** *** *** ***
Aldehyde Butyraldehyde NR NR * *
Aliphatic Hydrocarbon Gasoline *(1) NR *** *
Aromatic Hydrocarbon Toluene NR NR * *
Ester Butyl acetate NR NR * *
Ether Ethyl ether * * * *
Ketone Methyl isobutyl ketone (MIBK) NR NR NR *
Inorganic Chemicals
Inorganic acid Hydrochloric acid (35% wt) *** NR *** ***
Inorganic baseAmmonium hydroxide (28% wt) *** *** *** ***
Sodium hydroxide (25% wt) *** NR *** ***
Other
Bug spray DEET NR NR * *
Three-star (***): No crackingobserved on visor undermicroscope after chemical spray.Only negligible haze may havebeen observed. The visor passesimpact testing at 120 m/s afterspray.
Two-star (**): No crackingobserved on visor undermicroscope after chemical spray.Slight haze may have beenobserved, but an assessment ofthe extent of visor usability as aresult is subjective. The visorpasses impact testing at 120 m/safter spray.
One-star (*): No crackingobserved on visor by un-aidedeye after chemical spray. Visiblehaze may have been observed,but an assessment of the extentof visor usability as a result issubjective. The visor passesimpact testing at 120 m/s afterspray.
NR (not recommended):Crack(s) and/or severe warpand/or severe haze (i.e., thatwhich renders the visorunusable) can be observed onvisor after chemical spray; or thevisor fails impact testing at 120 m/s after spray.
Chemical application quick reference guideThe results shown in the table below were obtained under lab conditions (23 ± 2˚C and 25 ± 5% relative humidity) in the MSA test labs.For testing purposes, V-Gard visors were secured to V-Gard frames in the “as worn” position. Because each working environment is unique it is recommended you test your selected visor to see actual performance based on external factorsand individual chemicals blend and concentrations. The results shown in this Quick Reference Guide are intended as a guide only to help in theselection of the proper V-Gard face protection products. While the table shows the performance against certain chemicals, it is not intended tobe all-inclusive and such testing is not required by safety standards.Use only V-Gard frames or V-Gard Headgear with V-Gard visors. Other product combinations are not certified and may not function as intended.
In all cases, visor should be inspected and replaced if damaged in any way that renders it unusable in a particular environment.
(1) Not Recommended (NR) against this chemical when using a PC, clear flat, uncoated, 1.52 mm visor (10115840).
UVFits with earmuffs
Works with chinprotectors Impact Anti-Scratch Anti-fog Tinted Welding
(shade)Arc Elevated
temperatureChemicalresistant
Molten metalsplash
Polycarbonate sheet visorsIdeal for a protection from flying debris, splash or spray.•Sides of visor are contoured towards face for a closer fit and improved resistance to impact and•splash hazards.UV protection and good optical quality for permanent use.•
Sheet V-Gard visor, PC, clear, 203x432x1 mmEN 166 (2C-1.2 1B)
10115836
10115837*
**
Sheet V-Gard visor, PC, clear,241x432x1 mmEN 166 (2C-1,2 1B) 10115863
Sheet V-Gard visor, PC, clear,203x432x1.5 mmEN 166 (2C-1,2 1B 389)
10115840 EN 166/8
Sheet V-Gard visor, PC, clear, AF/AS,203x432x1.5 mmEN 166 (2C-1,2 1B 389 KN)
10154949
10154950*
**
EN 166/8
EN 166/8
Sheet V-Gard visor, PC, green tinted,AF/AS, 203x432x1.5 mm EN 166 (2-2 1 B 39 KN)
10154961
10154962*
**
Mesh visorsOptimised face coverage: Lenght 203mm x width 432mm•Durable, stainless steel, bound with heavy-duty plastic•Meets requirements for EN1731:2006•Luminous transmittance: >76 %•Specific shaping to integrate with hearing protection•
Mesh visor10155774
Mesh visor with plastic edge,compatible with a chin protector10155775
V-Gard® – Face Protection
* For chin protector adaptation (retractable chin protector: 97 mm in height, standard chin protector: 72.6 mm in height).
19
MSAsafety.com
Moulded V-Gard visor, PC, clear, AF/AS235x432x2.5 mmEN 166 (2C-1,2 1BT 389 KN)264x432x2.5 mmEN 166 (2C-1,2 1BT 389 KN)
10115844
10115853
(1)
EN 166/8(1)
EN 166/8
Moulded V-Gard visor, PC, green tinted, AF/AS235x432x2.5 mm EN 166 (2-2 1BT 39 KN)
10115845
Moulded V-Gard visor, PC, Shade 3 IR,203x432x1.8 mmEN 166 (3.0/4-3 1BT 39)
10115859
10115860*
**
Moulded V-Gard visor, PC, Shade 5 IR,203x432x1.8 mmEN 166 (5.0/4-5 1BT 39)
10115861
10115862*
**
Polycarbonate moulded visorsV-Gard PC moulded visors keep workers safe and comfortable in environments such as steel/smelting plantswhere they are exposed to high levels of heat and/or excessive glare. They are developed for heavy duty use andare thicker than most visors in the marketplace, which not only ensures impact resistance, but also reduces heatwarping. Moulded for superior optical quality.
Polycarbonate shaded moulded visorsV-Gard PC shaded moulded visors protect against damage from impact and infrared (IR) radiation. Designed forautogenous welding, metal pouring, gas soldering, and light cutting/brazing, they have been engineered forheavy-duty use. They are thick for high impact and heat resistance.
Moulded V-Gard visor, PC, clear reflective coated241x450x1.8 mm - EN 166 (2C-2,5 1BT3R)
10115848
Moulded V-Gard visor, PC, green reflective coated241x450x1.8 mm - EN 166 (2-4 1BT3R)
10115850
Polycarbonate reflective coated moulded visorsV-Gard polycarbonate reflective coated visors deflect a significant amount of heat. The reflective coating helpsfilter IR radiation and dissipate radiant heat. They are EN 166 ‘R’ certified: spectral reflectance of IR between 780nmand 2000nm is >60%, helping to protect skin and eyes from IR exposure. Clear or tinted versions are available fordark vs. glare-riddled environments.
* For chin protector adaptation (retractable chin protector: 97 mm in height, standard chin protector: 72.6 mm in height).
(1) Tested according to GS-ET-29 class 1 (4kA)
MSA – Hearing Protection
V-Gard Accessory System – Chin Protectors
Moulded V-Gard visor, Propionate, clear,203x432x2.5 mm - EN 166 (MSA 1B3)
10115855
10115856*
**
Moulded V-Gard visor, Propion,ate, clear,235x457x2.5 mm - EN 166 (MSA 1B3)
10115851
Part No Description
10115828 Retractable chin protector97 mm in height
Part No Description
10115827 Standard chin protector72.6 mm in height
Retractable chin protectorUnique retractable plates allow greater flexibility of head movement•both up and down, as well as side to side Opaque material ensures safety and standards compliance with clear,•tinted, shaded and coated V-Gard visors
Standard chin protectorCompact and lightweight design provides additional protection•between chin and neck areaOpaque material ensures safety and standards compliance with clear,•tinted, shaded and coated V-Gard visors
V-Gard® – Face Protection
Propionate moulded visorsV-Gard Propionate Visors provide good impact and splash protection especially for those applications wherechemical splash hazards exist. They are moulded and thicker with higher impact resistance than compareableacetate visors in the marketplace. Superior optical quality for permanent use.
* For chin protector adaptation (retractable chin protector: 97 mm in height, standard chin protector: 72.6 mm in height).
V-Gard chin protectors provide extra protection from impact, arc flash and splash hazards to face and neck, approved in combination with framesand visors.
ArcTintedFits with earmuffs
Works with chinprotectors Impact Anti-Scratch Anti-fog UV Welding
(shade)Elevatedtemperature
Chemicalresistant
Molten metalsplash
21
MSAsafety.com
Classic Line ear muffsRange of muffs designed to provide economic and reliable solution for most environments where hearingprotection is required.
Patented spring design offers low pressure tension and a good level of comfort•Three distinct wearing positions for ease of use•Excellent grip even when wearing gloves•
Accessories for left/RIGHT ear muffs
10092878 Hygiene kits for left/RIGHT Low
10092879 Hygiene kits for left/RIGHT Medium
10092880 Hygiene kits for left/RIGHT High
10094605 Hygiene kits for electronic left/RIGHT
Part No Description
SOR10012 SNR 26 dB, H=29 dB, M=23 dB, L=15 dB
Part No Description
SOR12012 SNR 31 dB, H=32 dB, M=28 dB, L=22 dB
EXCEXC features unique moulded inserts to ensure excellent noiseattenuation for medium noise levels and provide enough space for theears inside the cup.
HPEIn environments with very high noise levels, especially in lowfrequencies, HPE offers reliable protection. Thick, soft, foam-filledcushions provide good comfort and perfect seal.
left/RIGHT ear muffs
Passive ear muffs Unique muffs designed to account for theanatomical individuality of the user
Individual ear cups, left and right. The most•comfortable protection on the market Helmet mounted and headband muff•models3 distinct wearing positions of helmet•mounted models3 attenuations levels•4 colours: blue, white, yellow, grey•
MSA – Hearing Protection
left/RIGHT passive ear muffs
LOW SNR 25 dB (H=27 dB, M=22 dB, L=15 dB) 10087438 10087439 10087437 10101995
MEDIUM SNR 28 dB (H=29 dB, M=25 dB, L=17 dB) 10087429 10087430 10087428 10101996
HIGH SNR 31 dB (H=32 dB, M=28 dB, L=21 dB) 10087423 10087424 10087422 10101997
left/RIGHT electronic ear muffs SNR 27 dB (H=31 dB, M=24 dB, L=16 dB) CutOff Pro
10111826 CutOff Pro
10111823 Dual Pro
10111832 FM Pro
10111829
Electronic ear muffs Muffs enabling protection and listening at the same time
Level dependent hearing protector CutOff: face-to-face•communication, hearing and amplification of importantsound and warning signals while beeing protectedHearing protector Radio FM: excellent radio reception•and superior sound qualityDual: combination of CutOff and FM•All feature e.g.:•Sound levels from microphones and speakers are limited•to max 82 dB(A)Easy to use - operated by three distinct push buttons•Battery save and low battery warning system•
MSA – Eye Protection
MSA offers a full range of high quality spectacles and googles. The following are just a selection. Please ask for separate leaflets.
The following selected models are the perfect solution to fix the headband on the rain gutter ofa V-Gard 500 or 520 helmet with two special brackets.
Integrated eye protection Stow-away Fully integrated head and eye protection. The Stow-away “stows away” inside the helmet when eye•protection is not required - protecting the visor from damage. Extremely comfortable, with no pressurepoints behind the ears. Compatible with helmet mounted ear muffs.•For V-Gard and V-Gard 200 helmets.•
Part No Description
10002674 Stow-away visor, clear, coated antifog
10002675 Stow-away visor, tinted
AltimeterHybrid design for universal use.
Delivered with comfortable headband and•lenght adjustable soft templesHeadband option is ideal for use with ear•muffsComplete eye enclosure and superior shock•absorption.Sightgard anti-fog coating with good•antiscratch propertiesHeadband can be opened with one click•without taking off the helmet
ChemProFresh look, safe fit and completeprotection.
Protects against impacts, liquids, coarse dust•and metal splash."Soft touch" body adapts perfectly to the•faceCoating options: Sightgard+ or OptiRock•Exchangeable lens•Indirect but effective ventilation •
FlexiChemComfortable goggle with increasedchemical resistance.
With an acetate lens it protects against•splashes and large dust particlesThe pliable frame and indirect ventilation•enhances comfort and fitSightgard+ premium anti-fog coating •EN 166 "N" with good anti-scratch properties.
Part No Description
10145583 Altimeter (with temples and headband) smoke, Sightgard coating, Premium UV400, EN 166: 5-2.5 MSA 1 FT CE
10153915 Altimeter (with temples and headband) clear, Sightgard coating, Premium UV400, EN 166: 2C-1.2 MSA 1 FT CE
10145597 ChemPro clear, OptiRock coating (durable high performance anti-fog coating with outstanding anti-scratch properties EN 166 "KN"), EN 166: 2C-1.2 MSA 1 BT 349KN CE
10104671 ChemPro clear, Sightgard+ coating (premium antifog coating EN 166 “N” with good anti-scratch properties), EN 166: 2C-1.2 MSA 1 BT 349N CE
10145578 FlexiChem clear, Sightgard+ coating (premium antifog coating EN 166 “N” with good anti-scratch properties), EN 166: 2C-1.2 MSA 1 FT 34 N CE
Part No Description
GA9006 Bracket to attach a goggle to V-Gard 500/520 (2 clips)
23
MSAsafety.com
V-Gard® – Kits
V-Gard accessory system kits are designed to offer easy customer solutions for a variety of needs – all in oneconvenient box.
V-Gard forestry kits
BasicIdeal for lumberjacking
Orange V-Gard helmet with Staz-On•Standard V-Gard frame•V-Gard metal mesh visor•EXC ear muffs 27 dB•
PremiumComplete kit for forest activities
Orange V-Gard 500 helmet vented with •Fas-TracStandard V-Gard frame•V-Gard metal mesh visor•left/RIGHT ear muff 28 dB•PVC neck cape•
Premium with chinguardIdeal for tree lumberjacking and trimming
Orange V-Gard 500 helmet vented with •Fas-TracStandard V-Gard frame•V-Gard metal mesh visor with slots for•chinguardleft/RIGHT ear muffs 28 dB•PVC neck cape•Retractable chinguard•
Part No Description
GV161-001700E-000 Basic
GV462-0017004-000 Premium (without reflective stickers)
GV462-0017044-000 Premium (with reflective stickers)
GV462-0018004-000 Premium with chinguard (without reflective stickers)
GV462-0018044-000 Premium with chinguard (with reflective stickers)
Part No Description
GV512-0024000-000 Basic electrician kit
High visibility versions (optional reflective stickers)•Visors adapted to the shape of the ears-muffs•Widest face coverage•
Retractable chinguard option•Robust frame to withstand chainsaw rebound•
BasicIdeal for short-circuit electrical arc.
White V-Gard 500 helmet non vented, with •Fas-Trac; EN 397 440 V AC and EN 50365 certifiedStandard V-Gard frame – EN 166: 389 BT•V-Gard sheet visor, 203x432x1,5mm – EN 166 •(2C-1,2 1B 389)
Electrician kit
Flame retardancy The MSA winter liners offer 2 level of protection against flame
Supreme liners garments are made of special flame resistant fibers. Flame resistance cannot be removed by washing.•Select liners garments have been chemically treated to ensure flame retardancy up to 50 washings.•
The flame resistance performance of our Select and Supreme liners have been tested at the specialist notified testhouse BTTG according to ISO EN 14116 paragraph 6.1, 6.1.4 . Test reports are available on request.
Electrical arc The Supreme liners in addition to cold and flame performance, offerprotection from arc exposure:
Resistant to exposure to an ATPV (Arc Thermal Performance Value)•of 8 cal/cm²
• Tested to ASTM F 1959/F 1959M-06 aƐ1 test method•Perfect combination with V-Gard 500 unvented, V-Gard frame and 2.5 mm PC GS-ET-29 •arc tested visor.
Water Repellancy Supreme and Value •liners are waterrepellent for outdooroperations,performance Grade 3according to AATCC 222010
Knit capCan be worn under any model of helmet•Perfect ear protection without obstructing•visionHelmet remains stable on the head•
Attachment to helmet suspension2 velcro straps, wrapped around helmet headband•Offers proper stability and position•Easy to don, no adjustment required•
MSA offers three categories of V-Gard winter liners:Supreme: multiple layers, permanent flame retardance, arc thermal performance, water repellent. •Select: 2 layers of fabric, limited flame performance (25 or 50 washings). •Value: provides excellent protection against cold with maximum economy.•
All range is auto-certified Category 1 according to the following annex II of the PPE directive: “6.7 Clothing and/or accessories (whether or notdetachable) designed and manufactured to provide protection against weather conditions which are neither exceptional nor extreme, forprofessional use”. In addition, these liners have been added to the MSA V-Gard safety helmets certificates after checking of penetration and shockstest when used with helmets.
Neck pocket for warming pack(Supreme only)
Integrated pocket 9.5 x 5.7 cm to place a•warming pack for enhanced warmthWarming pack not supplied with liners,•available in most sporting goods retailers
Ear muffs compatibilityQuilted, adjustable flaps to provide continuous•cold protection with or without ear muffsFor use with earmuffs – won’t compromise•attenuation levelsEarflap opens and stores with hook and loop on•back of liner when in use with ear muffs
V-Gard® – Winter Liners
25
MSAsafety.com
Part No Description Lenght Warmth level
Flameretardancy
Water repellency
Withstands arcexposure
Can be worn with earmuffs
Sale Units in pcs
V-Gard Supreme Liners
10118425 V-Gard Supreme liner 370 mm 3
10118427 V-Gard Supreme liner, 2-piece
370 mm 3
V-Gard Select Liners
10129659 V-Gard Select liner, 2-piece
370 mm 12
10118423 V-Gard Select liner 370 mm 12
10118424 V-Gard Select liner, Yellow high visibility
370 mm 12
10118426 V-Gard Select neck gaiter 260 mm 6
V-Gard Value Liners
10118417 V-Gard Value liner knit cap 300 mm 12
10118418V-Gard value liner can be worn over or under helmet
370 mm 12
10118419 V-Gard Value liner 280 mm 12
10118422 V-Gard Value liner 370 mm 12
How it works?A water management system created from the HyperKewl™ fabric absorbs and releases water within the multi-layered material.
Simply submerge the product in water for 1 minute allowing the HyperKewl™ fabric to absorb the water•Gently squeeze out the excess water, wipe dry and wear•Before first use: follow activation proceeding above and let the product dry completely. This is necessary for the cooling fabric fibers to set•into the product.For washing: soap and water only (max 100 washes)•
MSA offers two innovative cooling pads. HyperKew™ evaporative cooling provides extended relief from heat fatigue and heat stress.Lightweight, durable and non-toxic•Easy to activate and re-usable•5-10 hours of cooling relief per soaking 6 to 12°C lower than the•outside temperature!
CE certified (PPE category 1)•Both have passed testing to EN 397•Accessories in V-Gard certificate•
Crown coolerProtect from dangerous heat•Hook and loop conveniently attaches easily to V-Gard helmet•suspensionsColours: royal blue•
Crown cooler with neck shadeProtect neck and head from dangerous heat and sun•Hook and loop conveniently attaches to V-Gard helmet suspensions•Colours: Hi-Viz yellow/lime (meets EN 471 requirements)•
V-Gard® – Cooling Pads V-Gard® – Neck Capes
MSA - Environmentally Sensitive
Part No Description
GA90022 Crown cooler
Part No Description
GA90023 Crown cooler + neck shade
27
MSAsafety.com
V-Gard® – Neck Capes
MSA - Environmentally Sensitive
Neck capes provides protection from wind and rain, dust, debris and liquid splash.Two different washable neck capes are available with all MSA helmet models. Both neck capes have to be fitted to the two rear tabs of the MSAsuspensions.
Part No Description
GA90005 PVC fluo orange neckcape
T1900700 Nomex orange neckcape
PVC fluo orangeneckcape
Protects from•wind, rain, debrisand liquid splashMainly used in•forestryapplications
Nomex orangeneckcape
Protects from•limited flamespreadMainly used for•OGP* applicationsor steel industries
* Oil, Gas and Petrochemicals
The MSA head protection range design is environmentally friendly and the production plant takes full account of all environmental considerationsin the manufacturing process, from the selection of raw material suppliers to shipping. All the plastic material wastage during operations orhelmets used for laboratory tests are sorted and recycled with all the plant waste (paper, etc). Globally MSA is compliant with all the latestenviromental directives such as the REACH, regulations for chemical components used in our products. All these aspects are written into our"Plant Safety & Environment Guideline and Policies" which are available on request.
At MSA, Every Life has a Purpose.
MSAsafety.com
MSA V-Gard is a protection icon in the PPE worldYou can find V-Gard helmets around the world in different markets and industries.MSA V-Gards are the most recognised industrial helmets globally. Everybody knows its "V" shape, not only workers but famous people aroundthe globe.Everyday you will see in movies, TV programs and TV news V-Gard helmets on the heads of celebrities: Beyonce, the Chilean miners, the FrenchPrime Minister, the street art creator JonOne and even Walker the bear at a Scottish zoo for who's favourite toy is a V-Gard.Let's play recognise the "V" and send us any funny pictures or pictures of famous people wearing V-Gards.
V-Gard is our brand but also your brand.
Your direct contact
Subject to change without noticeID 06-104.2 GB/01
MSA Europe Thiemannstrasse 112059 BerlinGermanyPhone +49 (0)30 68 86-0Fax +49 (0)30 68 86-15 58E-mail [email protected]
MSA International 1000 Cranberry Woods DriveCranberry Township, PA 16066USAPhone +1-724-776-8626Fax +1-724-741-1559E-mail [email protected]
Thank you for reading this data sheet.
For pricing or for further information, please contact us at our UK Office, using the details below.
UK OfficeKeison Products,
P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England.Tel: +44 (0)330 088 0560Fax: +44 (0)1245 808399
Email: [email protected]
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
