Using Remote Test Network - Module 8 - ACTModule 8: Using the Remote Test Network . Module 8 explains how the COMPASS Internet National Remote Testing Network delivers placement testing

User Guide

Module 8: Using the Remote Test Network Module 8 explains how the COMPASS Internet National Remote Testing Network delivers placement testing services to students living across the country before they arrive on campus or who are interested in your online and distance learning course offerings.

NOTE: The remote testing feature is only available on the Internet version of COMPASS.

Contents Topic Page

Part I Registering a Student to Take a COMPASS Test at a Remote Test Site 2 Part II Scheduling a Remote Test 3 Part III Finding a Student’s Registration Number 7 Part IV Becoming a COMPASS Remote Test Site 9 Part V Administering a COMPASS Remote Test 13 Part VI Communicating with Students about Remote Testing 17

Using the COMPASS Remote Testing Network Page 2 of 18

Part I Registering a Student to Take a COMPASS Test at a Remote Test Site Campus administrators can configure a test center to offer remote tests. A remote test is administered at the request of one institution but taken at a test center owned by a different institution. The institution requesting the test receives the results and uses their units to pay for the testing. The institution whose test center administers the test does not retain the results nor use any of their units.

NOTE: Tests administered at high school outreach centers or other centers affiliated with local institutions are not considered remote tests.

Student Actions for Remote Testing

The student must register with the institution that they plan to attend and receive an email with their COMPASS registration number.

If the student arrives for testing without the registration number, the administrator can access

the number by following the instructions in Part III, Finding a Student’s Registration Number.

If your college collects a proctoring fee, collect it from the student.

NOTE: You do not need to collect the test fee from students who take remote tests at ACT Test centers. They prepay their fee when they register and schedule their test.


Part II Scheduling a Remote Test This section describes how COMPASS sites register a student to complete a remote test package. A student record, including demographic information, is created immediately after the remote test is scheduled. Your site is charged .4 unit to store this information. Additional units for the tests are charged upon test completion.

Complete the following to schedule a remote test.

Step Action

1 Log in to COMPASS.

NOTE: The SESSIONS tab is the default. If your site is set up for remote testing, a Remote Testing section displays. (Preview sites are ineligible for remote testing.)

2 Click the Schedule a Remote Test link in the Remote Testing section.

Result: The Start New Remote Test Registration screen displays.


Step Action

3 Type the Student’s Last Name and the Student ID. Click GO.

Result: The Schedule a Remote Test screen displays.

4 Type the student information including Name, Student ID, Date of Birth, Address, Phone and Email address.

NOTE: The email address must be valid. The student receives an email

containing the registration number, test center contact information and instructions.

5 Click a test package from the Test Package list.

6 Click the Select Test Center link.


Step Action

7 Click the State/Province drop-down and click a state on the Find Test Center screen. Click Continue.

8 Click the City drop-down and click a city on the Find Test Center screen. Click Continue. Result: A list of available test centers in the area displays.

9 Click Select where the testing will take place.

Result: The Schedule a Remote Test screen displays. The selected test

center information displays below the Testing Location section.

10 To select another test center, click the Change Test Center link and repeat the steps to select a state, city and/or test center.


Step Action

11 Click OK. Result: A Remote Test Successfully Scheduled Notification Email

Sent screen displays. NOTE: An automated confirmation email is sent to the student and to the

test center staff at the testing location. The email includes the unique 6-8 digit COMPASS remote testing registration number. The registration number is valid for 45 days. Repeat the steps above to generate a new registration number at no charge, if the original number is not used in 45 days.

12 Review information on the Remote Test Successfully Scheduled Notification Email Sent screen. Click Back to Sessions when you are finished.

Result: The SESSIONS screen displays.


Part III Finding a Student's Registration Number Complete the following to find a student’s registration number.

Step Action

1 Log in to COMPASS.

NOTE: The SESSIONS tab is the default. If your site is set up for remote testing, a Remote Testing section displays.

2 Click the Find a student’s Registration Number link in the Remote Testing section.

3 On the Find Registration Number screen, type the student’s last name and/or the student ID.

Field Enter Example

Full last name or the first few characters of the last name

Smith or Smi to find all the last names beginning with Smi

Student’s Last Name

% can be used as a wildcard

%MIT% or SM%H

Full student ID or the first few digits of the student ID

8525 Student ID

% can be used as a wildcard

%525

http://act.corporate.act.org/products/ptts/compass/Shared%20Documents/Compass%20Documentation/COMPASS%20Modules/Part%20III%20Finding%20a%20Student's%20Registration%20Number


Step Action

4 Click the Where did the student register? (optional) drop-down to select the location where the student initially registered for the remote test (not the location where the student is taking the exam).

5 Click GO. Result: A list of available test centers in the area displays.

If your search finds: Then:

More than one record that matches the search criteria

1. Click Select next to the student record you are looking for.

Result: A screen displays listing the student information. The registration number displays at the top of the screen.

OPTION: Print by clicking Print or click Re-Send this to Student to send the information to the student.

2. Click Back to Sessions when you are finished

Only one record that matches the search criteria

Result: The next screen displays a listing of the student information. The registration number displays at the top of the screen.

Click Back to Sessions when you are finished.

No records that match your search criteria

Click the Back button on the No Matches Found screen to enter new criteria.


Part IV Becoming a COMPASS Remote Test Site To have your remote testing site listed in ACT's remote testing directory, email ACT at [email protected] with your request and site information or call (800) 645-1992 during regular ACT business hours. Follow the prompts to reach ACT's Customer Service staff.

An ACT staff person will ensure you are set up for remote testing and have your site added to the directory: www.act.org/compass/advant/remote.html

Complete the following steps to activate the COMPASS Internet System Remote Testing feature which allows your site to administer another test center's test packages on their behalf.

Step Action

1 Log in to COMPASS and click the SITES tab.

NOTE: The SITES tab only displays if the staff member has administrative rights to at least one of the functions on the tab.

2 Click Edit to view or edit the campus information.

Result: A screen displays your test center name and setup information.

mailto:[email protected]://www.act.org/compass/advant/remote.html


Step Action

3 Scroll down to the Test Center Status section. Select the Remote Testing checkbox to activate the testing center as a part of the national list of remote testing sites available. (Preview sites are ineligible.)

NOTE: Do not select the Remote testing checkbox for high school students who will test at high school outreach testing centers.

4 Type the cost of the test in the Fee students must pay to take remote test field.

5 Select the checkbox for the method of payment(s) accepted, in the Accepted payment methods section.

6 Type the hours of operation in the Hours Test Center is open field.


Step Action

7 Select the Require an appointment to take a remote test at this Test Center checkbox, if the students must make an appointment to take the test.

Type the information in the Contact Name, Contact Phone, and Contact Email fields.

8 OPTIONAL: Type the following information in the Additional instuctions for remote testing students box. E.g.,:

Items students should bring with them (picture ID, payment, registration email, etc.)

Time to arrive prior to testing

What building to go to

Where to park

Whom to call with questions NOTE: The additional instructions are emailed to each student when they

register for remote testing at your site.

9 Type the number of report copies to print after the test in the Report Copies field.


Step Action

10 Click Browse and select the location where these files will be stored.

11 Click OK to activate the information. Result: The information displayed in the License/Status column for your

campus test center is updated to read Local and Remote Testing.


Part V Administering a COMPASS Remote Test Complete the following to administer COMPASS tests to remote testing students. NOTE: Verify that the Remote testing checkbox is selected as outlined in Step 3 of Section IV,

Becoming a COMPASS Remote Test Site.

Step Action

1 On the Desktop, double-click the COMPASS Test Launcher icon.

2 On the Staff Login to Test Launcher screen, type your Staff ID and Password. Click Login.

3 If your campus has more than one test center, click Select where the testing is taking place.

NOTE: This screen only displays if your campus has more than one test center. If this screen does not display, go to step 4.


Step Action

4 If the student has a registration number, click the Launch a Test Package for another campus link in the Remote Testing section. Go to Step 8.

If the student does not have a registration number, go to Step 5.

Result: The Remote Testing Student Login screen displays and the workstation is ready to begin testing.

5 Click the Find a student’s Registration Number link in the Remote Testing section.

Result: The Find Registration Number screen displays.

6 Type the Student’s Last Name and Student ID. To narrow your search, click the Where did the student register drop-down and click the state where the student registered for the test. Click GO.

Result: A list of available test centers in the area displays.


Step Action

7 Select the student who is taking the test. NOTE: If there is only one test center at your site, you will not see this

screen.

Result: A screen displays listing the student information. The registration

number displays at the top of the screen.


Step Action

8 Type the following information:

The student’s last name. The name must be exactly as shown on the student’s remote testing registration email.

The COMPASS remote testing registration number.

9 Click CLICK HERE TO BEGIN.

Result: The test package that was preselected by the requesting college launches. The student is able to take the test as they would on campus.

Upon completion of the remote test, a Student Advising Report prints displaying the cut scores and course placement messages of the requesting institution.

NOTE: For additional copies of the student’s COMPASS record, the student must contact the requesting institution.


Part VI Communicating with Students about Remote Testing The following resources can make your institution more accessible to students all over the country. Web Pages Include information about remote testing on your web pages within the following topics:

Admissions application

Course registration process

Placement testing requirements

Advising services

Academic development and support services Recruiting and/or Admissions Letters Include in recruiting and admissions letters how remote testing makes the test results available prior to summer orientation.

Letters to students whose academic readiness places them on the “borderline” or “need further development” category

Based on the students test results, provide suggestions and resources they can use to build their skills.

Include an offer to re-test on campus to those who work on their skill development with the goal that they may qualify for placement into a higher level course.

Communications regarding online Internet instructional services With remote testing, the student can complete an initial assessment of their current academic skills. The assessment helps their course selection through your Internet instructional services.


Share the following information with your students to help them prepare for the COMPASS test: Before taking the COMPASS tests

Review the sample test questions at www.act.org/compass/sample/.

Request suggestions and resources from your college to help you with test preparation.

COMPASS testing is untimed. Each test takes approximately 20-30 minutes to complete.

Schedule enough time for testing.

Ask the testing center what you need to bring to the test (picture ID, registration number, any fee payments, etc.).

Arrive at the testing facility 30 minutes early. During testing

Read the directions for each test.

You will not be able to ask test questions once testing begins.

After you have completed the tests

Review your COMPASS Student Advising Report.

Talk to your college advisor and instructors about your results and ask questions about your courses and/or your program of study.

http://www.act.org/compass/sample/

Part I Registering a Student to Take a COMPASS Test at a Remote Test SitePart II Scheduling a Remote TestPart III Finding a Student's Registration NumberPart IV Becoming a COMPASS Remote Test SitePart V Administering a COMPASS Remote TestPart VI Communicating with Students about Remote Testing