USER T USB TYPE - Mobifb.mobi.net.lb/Library/Files/Drivers/USB Dongle... · KYOCERA Proprietary & Confidential 4 1.8. Standards z EMC FCC part.15 Class B z Safety IEC60950 *iBurst

iBurst User Terminal USB type(UTU-03) Specification

KYOCERA Proprietary & Confidential

i

iBurst

USER TERMINAL USB TYPE (UTU03-1900D-LB-A)

Specification

Reference: S40T-AA-007 Revision: 1.2.0 (Cedarcom) Date: Oct 7, 2008

THIS SPECIFICATION IS SUBJECT TO CHANGE POSSIBLY IN THE FUTURE.



ii

Document Release History

Revision Date Description of Change

1.0.0 2008-7-10 First version 1.1.0 2008-9-12 Update 2.1.General Functionality, 3.2.USB Cable and 3.5.

Packing Structure 1.2.0 2008-10-7 Update 3.4. Label specification and 3.5. Packing Structure



iii

TABLE OF CONTENTS

1. SPECIFICATION ..............................................................................................................4 1.1. General Specification.........................................................................................................4 1.2. Outline view .......................................................................................................................5 1.3. Hardware Description ........................................................................................................7 1.4. LED indicators...................................................................................................................8 1.5. Radio Specifications...........................................................................................................9

1.5.1. Transmitter Specifications ........................................................................................................10 1.5.2. Receiver Specifications............................................................................................................. 11

1.6. Environmental Specifications ..........................................................................................12 1.6.1. Storage Specification................................................................................................................12 1.6.2. Transportation Specification.....................................................................................................12 1.6.3. Operating Specification............................................................................................................12

1.7. Physical Interface Specifications .....................................................................................13 1.7.1. USB Connector ........................................................................................................................13 1.7.2. Mechanical Hinges...................................................................................................................13 1.7.3. External Antenna Connector.....................................................................................................13

1.8. Standards .........................................................................................................................14 1.9. RoHS................................................................................................................................14

2. FUNCTION....................................................................................................................15 2.1. General Functionality ......................................................................................................15 2.2. Software ...........................................................................................................................16

2.2.1. Device drivers ..........................................................................................................................16 2.2.2. Utility software.........................................................................................................................16

2.3. Support OS.......................................................................................................................16 3. COMPONENTS STRUCTURE............................................................................................17

3.1. Components list................................................................................................................17 3.2. USB Cable........................................................................................................................18 3.3. Holder ..............................................................................................................................19 3.4. Label specification ...........................................................................................................20 3.5. Packing Structure.............................................................................................................21 3.6. Users Manual...................................................................................................................23



4

1. Specification 1.1. General Specification

Item Specification Comments Frequency range 1,900-1,920MHz Maximum transmit power 20dBm 3 dB (16-QAM) Class III

Down link 1,061Kbps （Max） Data rate Up link 346Kbps （Max） Mod Accuracy <6 % rms at Mod class 7 Protocol standard iBurst Protocol Specification v1.3 PC interface USB1.1 Antenna Extensible Helical Antenna Antenna Gain 0dBi Dimensions 39 (W) x 85 (H) x 12 (D)

85 mm

39 mm 12 mm

Weight 38g Except CAP Power consumption Max: 2.5W USB Bus Power Operating Temp. 0 to 40 C



5

1.2. Outline view

Figure. 1 Outline view with CAP



6

Figure. 2 Outline view removed CAP



7

1.3. Hardware Description

Figure. 3 Block diagram



8

1.4. LED indicators

Figure. 4 LED There is a dual color LED to indicate a communication status and a receive signal strength. The following shows the display specification.

Table. 1 Display specification

UT status Color LED state

Power OFF --- Lights out

Booting --- Lights out

Receive signal (Strongly) Green ---

Receive signal (weakly) Yellow ---

When the data is NOT transmitted/ received

Variable by signal strength

Lighting

When the data is transmitted/ received

Variable by signal strength

Flashing

Out of service Orange Lighting

Fault *1 Orange/Yellow Flashing

*1:When the temperature inside UT became anomaly, UT status will be the Fault.

External Antenna Connector (MMCX)

LED



9

1.5. Radio Specifications

Figure. 5 Block diagram（RF）



10

1.5.1. Transmitter Specifications The following table shows the transmitter specifications for iBurst UTU. The transmitter characteristics

are specified at the antenna terminal.

UItemU USpecificationU UCommentsU

Maximum Transmit Power Mod Class = 0 to 1 22 dBm Mod Class = 2 to 5 21 dBm Mod Class = 6 to 7 20 dBm Minimum Stream Power –20 dBm Transmit Power Error 3.0 dB Transmit Power Control Step Size 1.0 dB Tolerance: 0.5 dB Absolute Error 6.0 dB Frequency error 100 Hz Max. ( 0.053 ppm) Locked to BS Transmit burst timing error 0.25 Symbol Max. Modulation accuracy Mod Class = 0 to 3 10.0 %BrmsB Mod Class = 4 to 5 9.0 %BrmsB Mod Class = 6 7.0 %BrmsB Mod Class = 7 6.0 %BrmsB Occupied bandwidth 625 kHz Max. Adjacent Channel Power Ratio 625 kHz offset 35.0 dBc/ch Min. 1,250 kHz offset 45.0 dBc/ch Min. 1,875 kHz offset or more 50.0 dBc/ch Min. Out-of-Band Spurious Emission 9 kHz to 150 kHz –36.0 dBm/1 kHz Max. 150 kHz to 30 MHz –36.0 dBm/10 kHz Max. 30 MHz to 1 GHz –36.0 dBm/100 kHz Max. 1 GHz to 3.7 GHz –23.0 dBm/100 kHz Max. 3.7 GHz to 12.75 GHz –30.0 dBm/100 kHz Max. Out-of-Band Non-Spurious Emission 0 Hz | fBoffB | < 1 MHz –13.0 dBm/10 kHz Max. 1 MHz | fBoffB | < 5 MHz –13.0 dBm/1 MHz Max.

Ramp Up/Down transmit power +6.0 dB/10 sec Transmit OFF Power –65.0 dBm/1 MHz Max.



11

1.5.2. Receiver Specifications The following table shows the general receiver specifications for iBurst UTU. The receiver

characteristics are specified at the antenna terminal.

UItemU USpecificationU UCommentsU

Nominal quality FER 10P

–2PPP

Receive sensitivity Mod Class = 0 –107.5 dBm Max. Mod Class = 1 –105.7 dBm Max. Mod Class = 2 –104.2 dBm Max. Mod Class = 3 –101.3 dBm Max. Mod Class = 4 –99.1 dBm Max. Mod Class = 5 –96.9 dBm Max. Mod Class = 6 –94.8 dBm Max. Mod Class = 7 –93.5 dBm Max. Mod Class = 8 –91.6 dBm Max. Maximum Input Power(No damage) 0 dBm Maximum Input Power(1% FER) –35.0 dBm Out-of-Band Blocking 0.1 MHz – (X-15) MHz ≥ –23dBm X = 1900 MHz （Y+15） MHz – 12.75 GHz ≥ –23dBm Y = 1920 MHz Receiver Leakage Power ≤ –65dBm/1MHz DSSI Estimator Accuracy –105.0 dBm to –45.0 dBm ±4.0 dB –110.0 dBm to –105.0 dBm ±6.0 dB. SINR Estimator Accuracy SINR Range : -3 to 25 dB

±3.0 dB

Out-of-Band Receiver Radiated Power 9 kHz to 1 GHz –57.0 dBm/100 kHz Max. 1 GHz to 3.7 GHz –28.0 dBm/100 kHz Max. 3.7 GHz to 12.75 GHz –47.0 dBm/100 kHz Max.



12

1.6. Environmental Specifications

1.6.1. Storage Specification UT is compliant with ETSI (ETS300 019-1-1 Class 1.2) as the storage condition. Storage Temperature Range –25 to +55 C Storage Humidity Range 95 %RH No condensing

1.6.2. Transportation Specification UT is compliant with ETSI (ETS300 019-1-2 Class 2.2) as the transportation condition.

1.6.3. Operating Specification UT is compliant as the following operating condition. Operating Temperature Range 0 to +40 C Operating Humidity Range 5 to 95 % RH No condensing Operating Environment Indoor



13

1.7. Physical Interface Specifications

1.7.1. USB Connector

Table. 2 USB connector Item Specification

Connector A type Mating Life 1,500cycles

1.7.2. Mechanical Hinges

Table 3 Mechanical Hinge for Main body Item Specification

Hinge Hinge for Main body side Rotation Life 5,000 cycles(1cycle: 0→+90deg→0→-90deg→0 /4sec)

Table 4 Mechanical Hinge for USB connector

Item Specification Hinge Hinge for USB connecter side Rotation Life 5,000 cycles(1cycle: 0→+90deg→0→-90deg→0 /4sec)

1.7.3. External Antenna Connector

Table. 5 External Antenna connector Item Specification

Connector MMCX Coaxial Connector Spec. Impedance : 50ohm

VSWR : less than 1.25 Mating Life 1,000 cycles



14

1.8. Standards EMC FCC part.15 Class B Safety IEC60950

*iBurst User Terminal is designed to comply with all items above sec. (1.8), but it is not tested and

is not approved officially.

1.9. RoHS UTU is compliant with EU RoHS.



15

2. Function 2.1. General Functionality

UT provides wireless communication functions to end user.

1) PPP sessions connected between user devices and an iBurst base station gather and disseminate via PDSN

2) Upstream / downstream power control 3) Base station authentication and exchange of shared secret (iHap) 4) UT authentication (iTap) 5) Encryption/Decryption as Air Security (iSec) 6) Link Adaptation 7) QoS: 4 kinds of QoS (BE, VoIP, VoIP+ and VoIP-PBX) are supported.



16

2.2. Software The PC software includes PC drivers to allow operation of the UT under a variety of end user devices.

Kyocera provides PC software which is listed in below. Kyocera does not provide it as a setup CD which will be provided with UT as a package for end user. The contents of setup CD should be the software below.

The PC software includes. 1) Device drivers 2) Utility software to monitor UT status

2.2.1. Device drivers This device driver software provides PC-UT interface. After installing this software, PC’s operating

system is able to recognize UT.

2.2.2. Utility software This utility software provides the information about UT status on PC. This information keeps to be

renewed automatically. The information is shown by utility as follows.

a) Link Status

b) Link Speed

c) Frame Error Rate

d) Signal Strength

e) Current Data Rate (Download / Upload)

f) UTID

g) Software version

2.3. Support OS

Software supports the following operating systems.

1) Windows Vista (32bit version only)

2) Windows XP SP2 (32bit version only)

3) MAC OS 10.4 and 10.5 (Intel CPU and PowerPC) Software supports English language.



17

3. Components Structure 3.1. Components list

The following tables are components list Kyocera supply as commercial product from factory.

Table. 6 Component list Item Component Q’TY

1 UTU-03 with CAP (Set Assy.) 1 2 USB Cable 1 3 Holder 1 4 Product liability manual 1



18

3.2. USB Cable

Figure. 6 USB Cable



19

3.3. Holder

Figure. 7 Holder



20

3.4. Label specification

24

MADE IN JAPAN

・

UTID XXXXXXXXXXXXXXX

Ser.No. XXXXXXXXXXXSer.No. Barcode(CODE39)

UTID Barcode(CODE128)

・・・

Caution Handle with care. Do not disassemble. Keep unit dry.

Note1.

Note2.

・

0×××Note1.In this area indicate as follows

00001～(Reset for every production month-year)client unique codeproduction year:(Last two digit of year.(ex.2007 07))production month:(1,2,3 x,y,z)･･･

→

Note2.UTID is 15 numbers of decimal. UTID_BASE is changed into UTID. Ex) 00C0EE001110 001264384004368(00C0EE00 0012643840+1110 04368)→ → →

×××××

Cedarcom Broadband

USB Dongle

Figure. 8 Serial Number Label



21

3.5. Packing Structure

Figure. 9 Packing structure



22

Figure. 10 Label for packing



23

3.6. Users Manual Draft of the Users Manual written in English will be provided in electronic file by Kyocera. User’s

manual will be localized to match customer’s environment and prepared by the carrier.



24

End of document

Documents

USER T USB TYPE - Mobifb.mobi.net.lb/Library/Files/Drivers/USB Dongle... · KYOCERA Proprietary & Confidential 4 1.8. Standards z EMC FCC part.15 Class B z Safety IEC60950 *iBurst