Alarm System Starter Kit

Model: SK-250

iPhone not included

Protect your Home the Smart Way!

User Manual

P/N: 101Y269-001 ©2017 SKYLINK GROUP.

1. Package Contents

1x Internet Hub 2x Motion Sensors

2x Door/Window Sensors

1x Keychain Remote

Mounting Accessories

2x Power Adapters

1x Indoor Wireless Pan & Tilt Camera

1x Ethernet Cable

NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.

2. Install the Internet Hub

1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.

2. Plug in the Power Adapter.

3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)

3. Insert Batteries for Sensors

1. Slightly push both sides of the Door/Window Sensor and pull out the cover to insert an AAA-Battery.

2. Use a coin to open the Motion Sensor and insert an AA-Battery.

4. Download the SkylinkNet App

1. Tap on App Store 2. Tap on Search Icon and search for “SkylinkNet.”

3. Tap on Free Buttonto download the App.

4. When download is completed,it will show on your HomeScreen.

NOTE: Only the “SkylinkNet” App will work withthe Internet Hub.

5. Create a SkylinkNet Account

1. Open the SkylinkNet App and tap on “Create Account.”

2. Enter your information and tap on “Sign Up.”

3. Check your email to activateyour account and tap on

“Continue” to log in.

4. Click on the link from the email to activate your account. 5. Now you are ready to login to your account.

6. Set up the Internet Hub

1. Tap on “Set up Hub.” 2. Tap on “Initialize a new Hub.”

3. Follow the instruction on screen to connect the Internet Hub.

5. Follow the instruction on screen to reset the Internet Hub and tap “Continue.”

4. Enter your information and tap on “Continue.”

6. Hub is added and you will see a green or red dot indicating if it’s connected to the Hub.

7. Add Sensors and Keychain Remote

1. Go to “More” and tapon “System Settings.”

2. Tap on “Setup Wizard.” 4. Tap on “Sensors” or “Security Remote.”

3. Tap on “Add Device.”

5. Select the type ofsensor you want to add.

6. Name your sensor andlocation and tap “Continue.”

7. Tap the “Learn Now”button and follow the videoto activate the sensor.

(If you select Security Remote, skip to Step 6)

8. Now trigger the sensorsto test if the SkylinkNet App is showing the sensor statuscorrectly.

NOTE: If motion is detected, a red LED light inside the sensor will flash. Sensor will not be triggered by new motion unless no motion has been detached for 15 seconds.

8. Setup Hub Keypad Password

1. Go to “More.” 2. Tap on “System Settings.” 4. Enter Passcode and tap on “Save.”

3. Tap on ”Hub Keypad Password.”

1. Go to “More.” 2. Tap on “System Settings.” 4. Set your time zone and tap on “Save.”

3. Tap on “Time Settings.”

9. Setup Time Zone

10. Home Screen Overview

Settings

Push Notification

Online/Offline

Sensors

Receivers

Menu Bar

Sensor activationThe blue sensor icons will turn red if its activated.

Receive push notification anytime a new activity takes place.

Settings for individual sensor,remote or receiver.

Shows the hub name and connection.

Choose between different screens.

.

Sensors icons are blue/red.

Push icons areblack.

11. Sensor Settings

Alarm Settings Push Notification Chime

Learn

Rename

DeleteSelect when this sensor should activate an alarm.

Select if you want to receive a push notification

during an alarm only or always when a sensor is activated.

If enabled, the Internet hubwill sound an alert chime when

this sensor is activated.

Learn the sensor with theInternet hub.

Change the name of this sensor.

Delete this sensor from the hub.

Tap on the gearicon to edit the settings of thisspecific sensor.

(Learn the sensor if you have selected“Learn Later” in Step 7 of “Add Sensorsand Keychain Remote).

12. Place the SensorsPlace each of the device in the appropriate locations (see example below).

The motion sensor can be mounted with a double-sided tape

or screws on a ceiling.

Mount the Door/Window Sensor on your door or window with a included double-sided tape.

It can be also installed to monitor or protect cabinets and safes.

Status of the Alarm System

Arm Home, Arm Away / Exit Delay

Slide to activatethe hub siren inemergency.

13. Alarm Screen Overview 14. Arm Home / Arm Away

Arm Home Arm Away / Exit Delay

Select “Arm Away” to protect your home when you’re away. This mode activates or triggers the alarm after a

default set of time, giving you enough time to get in and out ofyour house to arm/disarm the alarm system.

Select “Arm Home” to protect while you’re at home. This mode deactivates

motion sensors but leaves other sensors activated.

15. Disarm Alarm System

When an alarm is activated, apush notification will be sent toall users and your smartphone willplay an alarm sound.

Tap the “Disarm” Button to disarm the alarm system.

16. Keychain Remote

See all the recent activities of the Alarm Systemon the Event Log.

17. Event Log

3. Tap on “Event Log.”2. Tap on “System Settings.”1. Go to “More.”

Arm and disarm the alarm systemwith a keychainremote.

Arm Away

Arm Home

Disarm

Panic ButtonPress and hold the Panic Buttonfor 5 sec. to activate it.