User Manual - KRIPPL-WATCHES · 2016-05-20 · user manual carefully, particularly the safety notes. Failure to heed this user manual may result in severe injury or to damage to the

Mit Ausnahme von Aldi Süd verwenden alle anderen Länder das Sempre Logo mit „R“.

SUNRISE ALARM CLOCK WITH MUSICAL ALARM AND RADIO

User ManualSpend a little Live a lot.

ID: #05007

myhansecontrol.c

om

MA

NUA

L

DEVELOPED IN GERMA

NY

User-friendlyManual

QR codes take you where you want to go quickly and easily

Whether you require product information, spare parts or accessories, details on warranties or aftersales services, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all.

What is a QR code?A QR code (QR = Quick Response) is a type of matrix that can be read with a smartphone camera and that contains a link to a website or contact details, for example.Advantage: You do not need to manually enter a website address or contact details.

This is how it worksTo scan the QR code, all you need is a smartphone with QR code reader software and an internet connection.* This type of software can be downloaded for free from your app store.

Try it out nowJust scan the QR code with your smartphone and find out more about the Aldi product you have purchased.*

Your Aldi Service PortalAll details mentioned above can also be found in the Aldi Service Portal at www.aldi.co.uk.

*Depending on your tariff plan you may be charged for the connection.

Dok.

/Rev

.-N

r. 9

3913

_201

6051

9

Overview ...........................................................................4Use ......................................................................................5Pack contents/parts .........................................................6General information .........................................................7

Reading and storing the user manual ............................. 7Explanation of symbols ...................................................... 7

Safety ............................................................................... 10Proper use ........................................................................... 10Safety notes ........................................................................ 10

First use ........................................................................... 16Checking the sunrise alarm clock and pack contents ......16Mains connection ................................................................17

Operation ........................................................................ 17Setting the date, time and language ............................. 18Setting the alarm and wake-up light ............................20Test the alarm in fast forward .......................................... 23Activating the alarm .......................................................... 23Deactivating the alarm ..................................................... 24

Radio ................................................................................25Searching and saving radio stations ............................. 25Sleep timer (radio) ............................................................. 26

Use as a light ................................................................... 27Night light ........................................................................... 27Sleep timer (light) ..............................................................28

LCD backlight ...................................................................29Resetting the settings ....................................................29Battery operation ...........................................................30

Changing the battery .......................................................30Cleaning ........................................................................... 31Storage ............................................................................32Troubleshooting .............................................................32Technical data .................................................................37Declaration of conformity ..............................................38Disposal ...........................................................................38

Disposing of the packaging .............................................38Disposing of the sunrise alarm clock ..............................39

Warranty card .................................................................. 41Warranty conditions .......................................................42

Contents

A

B

1

2

3

4 GB IRE

C

D

4

3

6

7

8

9 10

11

12

17

16

131415

18

5

5GB IRE

6

Pack contents/parts1 LCD 10 button

2 Mains cord with mains adapter

11 button

3 Base with battery compartment

12 button

4 button 13 button

5 Antenna cord 14 button

6 Female plug 15 button

7 RESET button 16 button

8 OFF/LO/HI slider 17 button

9 button 18 button

GB IRE

The pack contents include three type AAA 1.5 V batteries.

AFTER SALES SUPPORT

GB IREGeneral information

[email protected] IRE 00800 52323000

General informationReading and storing the user manual

This user manual accompanies this sunrise alarm clock with musical alarm and radio. It contains important information on start-up

and handling.

For improved readability, the sunrise alarm clock with musical alarm and radio will be referred to only as the “sunrise alarm clock” below.

Before using the sunrise alarm clock, read through the user manual carefully, particularly the safety notes. Failure to heed this user manual may result in severe injury or to damage to the sunrise alarm clock.

The user manual is based on the standards and rules in force in the European Union. When abroad, you must also observe country-specific guidelines and laws.

Store the user manual for future use. If you pass the sunrise alarm clock on to third parties, please be absolutely sure to include this user manual.

Explanation of symbolsThe following symbols and signal words are used in this user manual, on the sunrise alarm clock or on the packaging.

AFTER SALES SUPPORTGB IRE 00800 52323000

GB IRE General information

8 [email protected]

WARNING!This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided.

CAUTION!This signal symbol/word designates a hazard with low risk that, if not avoided, may result in minor or moderate injury.

NOTICE!

This signal word warns against potential damages to property.

This symbol provides you with useful supplementary information on assembly or operation.

Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all applicable Community regulations for the European Economic Area.

AFTER SALES SUPPORT

GB IREGeneral information


The TÜV Süd seal certifies that the sunrise alarm clock is safe if used properly.

This symbol identifies electric devices corresponding to protection class II.

Products marked with this symbol may only be operated in indoor areas.

Products marked with this symbol have positive polarity.

This symbol identifies devices that are operated with direct current.

This symbol certifies conformity with class V energy saving criteria in accordance with the American Energy Star environmental standard.


GB IRE Safety

10 [email protected]

SafetyProper useThe sunrise alarm clock is designed for use as an alarm clock. It is also suitable for use as a light. It is only intended for private use in indoor rooms and not suitable for commercial or outdoor use.

Only use the sunrise alarm clock as described in this user manual. Any other use is deemed improper and may result in damage to property or even personal injury.

The manufacturer or vendor accepts no liability for damage caused by improper or incorrect use.

Safety notes

WARNING!

Risk of electric shock!Improper use, faulty electrical installation or excessive mains voltage may result in an electric shock.

− Only connect the sunrise alarm clock to an easily accessible socket so that you can quickly disconnect it from the mains in the event of a fault.

AFTER SALES SUPPORT

GB IRESafety


− Do not operate the sunrise alarm clock if it is visibly damaged or if the mains cord or mains adapter is defective.

− Only replace the damaged mains adapter with a mains adapter of the same type. In this case, contact the service address indicated on the warranty card.

− Do not open the housing; instead, have a qualified professional perform the repairs. In this case, contact the service address indicated on the warranty card.

− Do not immerse the sunrise alarm clock or the mains adapter in water or other liquids.

− Never touch the mains adapter with damp hands.

− Never pull the mains adapter out of the socket by the mains cord. Always do so by taking hold of the mains adapter.

− Never use the mains cord as a carrying handle.

− Keep the sunrise alarm clock and the mains adapter away from open fire and hot surfaces.

− Do not kink the mains cord and do not lay it over sharp edges.


GB IRE Safety


− Only use the sunrise alarm clock indoors. Never operate the sunrise alarm clock in wet rooms or in the rain.

− Never store the sunrise alarm clock such that there is a risk of it falling into a tub or a basin.

− Never reach to retrieve an electrical device if it has fallen in water. In such a case, immediately disconnect the mains plug.

− Make sure that children do not insert any objects in the sunrise alarm clock.

− Always switch the sunrise alarm clock off and pull the mains adapter out of the socket when you are not using it for a prolonged period, when you intend to clean it or in the event of a fault.

WARNING!

Danger for children and persons with impaired physical, sensory or mental capacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowledge (e.g. older children).

AFTER SALES SUPPORT

GB IRESafety


− This sunrise alarm clock may be used by persons with impaired physical, sensory or mental capacities or those lacking experience and knowledge if they are supervised or have been instructed in how to safely use the sunrise alarm clock and have understood the risks associated with operating it. Children must not play with the sunrise alarm clock. Cleaning and user maintenance must not be performed by children.

− Keep children away from the sunrise alarm clock and mains adapter.

− Do not allow children to play with the packaging wrapper. Children could put it in their mouth, swallow it and choke.

WARNING!

Risks associated with batteries!Improper handling of batteries could pose a risk to your health.

− Batteries may pose a risk to health if ingested. You should therefore store the batteries so that they are not accessible for small children.


GB IRE Safety


If you suspect that a battery has been swallowed or otherwise incorporated, seek immediate medical attention.

− Promptly remove an empty battery from the battery compartment. Otherwise it could leak. If a battery has leaked, avoid contact with your skin, eyes and mucous membranes. In the event of contact with battery acid, immediately flush the applicable areas with plenty of clean water and consult a physician.

− Do not throw batteries in fire. They could explode or release toxic vapours.

− To prevent batteries from leaking, do not charge them, do not disassemble them and do not short circuit them.

− Take the batteries out of the battery compartment as soon as they are empty.

− Only use batteries of the same type (see chapter “Technical data”).

− Do not use old and new batteries in combination with one another.

AFTER SALES SUPPORT

GB IRESafety


CAUTION!

Risk of injury! − Lay the mains cord so that it does not

pose a tripping hazard.

NOTICE!

Risk of damage!Improper handling of the sunrise alarm clock may result in damage.

− Do not place any objects on the sunrise alarm clock.

− Do not apply any pressure to the display and do not touch it with edged objects. Otherwise the display could break.

− Protect the sunrise alarm clock against dust. − Avoid very strong magnetic fields (e.g.

from electric welding machines or transformers) as they could interfere with the correct time measurement.

− Do not operate the sunrise alarm clock continuously at temperatures between 0 °C and –10 °C. Do not operate or store the sunrise alarm clock at temperatures under –10 °C and over 40 °C.


GB IRE First use


NOTICE!

Risk of short circuit!Improperly connecting the sunrise alarm clock may damage it.

− Only connect the sunrise alarm clock if the mains voltage of the socket corresponds to the nameplate specification of the mains adapter.

− Only use the sunrise alarm clock with the enclosed mains adapter.

First useChecking the sunrise alarm clock and pack contents

1. Take the sunrise alarm clock out of the packaging.2. Check to make sure that the delivery is complete

(see fig. A and B).3. Check whether the sunrise alarm clock or the

individual parts exhibit damage. If this is the case, do not use the sunrise alarm clock. Contact the manufacturer via the service address indicated on the warranty card.

AFTER SALES SUPPORT

GB IREOperation


The power supply of the sunrise alarm clock is provided by three type AAA 1.5 V batteries. The batteries have already been inserted in the battery compartment upon delivery, however, a battery insulating strip prevents contact with the sunrise alarm clock. It clearly protrudes between the battery compartment and the cover. You can pull it out without opening the battery compartment.

Mains connection1. Insert the barrel plug of the mains cord 2 in the

female plug 6 .

2. Insert the mains adapter in a socket.

The LCD 1 will illuminate.

OperationPlease note that the sunrise alarm clock is only fully functional when connected to the mains. During battery operation, only the clock and a single warning sound (“beep”) are activated.


GB IRE Operation


Setting the date, time and languageThe date, time and language can only be set in one continuous step. You cannot configure the individual functions separately.

1. Hold the button 16 down for approx. 3 seconds. The current year will start blinking on the LCD 1 .

After approx. 30 seconds of inactivity, the sunrise alarm clock will switch back to the normal display. Your settings up to this point will be saved. In this case, start the configuration process anew.

2. Push the button 11 or button 17 to set the year.

To fast forward or fast rewind while setting the current year, hold the or button down.

3. Once you have set the year, tap the button again. The current year will disappear and the current month will start to flash.

4. Push the or button to set the current month.5. Tap the button again. The current day will start to

flash.6. Push the or button to set the current day.7. Tap the button again. The current hours will start

to flash.

AFTER SALES SUPPORT

GB IREOperation


8. Push the or button to set the current hours.9. Tap the button again. The current minutes will

start to flash.10. Push the or button to set the current minutes.11. Tap the button again. The current hours/minutes

will disappear and the current hour format will start to flash.

12. Push the or button to select 12-hour or 24-hour format.If 24-hour format is selected, the date will be shown in “day/month” format. If 12-hour format is selected, the date will be shown in the “month/day” format.

13. Tap the button again. The current hour format will disappear and the current language will start flashing. You can choose from the following languages for the display of the day of the week:

Abbreviation LanguageGE German

EN English

FR French

DU Dutch

SP Spanish

IT Italian

14. Push the or button to select which language the days of the week will be displayed in.


GB IRE Operation


15. Tap the button again.

The date, time and language for the day of the week have now been set.

Setting the alarm and wake-up lightSetting the alarm is a continuous step from setting the alarm time to setting the wake-up light. You cannot configure the individual functions separately.

1. Hold the button 9 down for approx. 3 seconds. The current hour setting for the alarm time will flash on the LCD.

After approx. 30 seconds of inactivity, the sunrise alarm clock will switch back to the normal display. Your settings up to this point will be saved. In this case, start the configuration process anew.

2. Push the button 11 or button 17 to set the hours.

3. Then tap the button again. The current minute setting for the alarm time will start to flash.

4. Push the or button to set the minutes.

5. Tap the button again. The current status of the alarm will start to flash.

AFTER SALES SUPPORT

GB IREOperation


6. Push the or button to:• activate the alarm and alarm repeat ( ),• activate the alarm only ( ),• switch off the alarm (no symbol).

7. Then tap the button again. You will now hear the preset alarm sound (beep). The number (09) and the symbol ( ) for the alarm sound will start to flash.

8. Push the or button to select the desired alarm sound. You can choose from the following sounds:

Alarm sound Number SymbolBird chirping 01

Babbling brook 02

Forest 03

Ocean waves 04

Rain 05

Harbour 06

Wind 07

City 08

Beep 09

Radio 10 FM (top left of the display)

9. Tap the button again. The current volume setting for the alarm will flash.


GB IRE Operation


10. Push the or button to select the desired volume between “1 VO” (very quiet) and “18 VO” (full volume). If you would like to deactivate the alarm sound, select “0 VO”.

11. Tap the button again. The display and the symbol for brightness of the light ( ) will start to flash.

12. Push the or button to select a brightness between “01” (very low) and “18” (very light). If you do not want the alarm clock to light up when the alarm sounds, select brightness “00”.

13. Tap the button again. The time for the wake-up sequence will start to flash.

14. Push the or button to set the time for the wake-up sequence (OFF, 05, 10, 15, 20, 25 or 30 minutes). The selection for the wake-up sequence will determine the number of minutes for activation of wake-up light before the alarm sounds at the set time. At the beginning of the wake-up sequence, the wake-up light will illuminate at a lower brightness and gradually become brighter until it has reached the set brightness at the set alarm time. The alarm sound will play at low volume at the set alarm time, then become increasingly louder and reach the set volume after 60 seconds.If you would only like the wake-up light to turn on at the set alarm time, select “OFF”.

AFTER SALES SUPPORT

GB IREOperation


15. Tap the button again.

You have now set the alarm of the sunrise alarm clock.

Test the alarm in fast forward − To test the alarm with the selected presets, tap the

button 12 .

Alarm fast forward does not work when the radio is activated as the button is need to set the station.

The brightness will increase from low to the set brightness during the first 10 seconds of the test. The corresponding brightness will be indicated on the LCD 1 while the symbol for brightness ( ) flashes.The volume of the alarm sound will increase from low to the set volume in the next 10 seconds of the test. The increasing volume will appear on the LCD while “VO” flashes next to it.

− If you would like to abort the test prematurely, tap the button again.

Activating the alarm1. To activate the alarm, briefly tap the button 9 .

The alarm symbol ( ) (for alarm sound 09 “beep”) or the alarm and note symbol ( ) (for alarm sounds 01–08) will appear on the LCD 1 .


GB IRE Operation


If you have selected the radio (alarm sound 10) as the alarm sound, the alarm symbol ( ) and “FM” will appear on the top left of the LCD.

2. Tap the button again to set the alarm to repeat. The symbol for the alarm repeat function ( ), the alarm symbol ( ) (with the “beep” alarm sound 09) or alarm and note symbol ( ) (with the alarm sounds 01–08) will appear on the LCD.If you have selected the radio (alarm sound 10) as the alarm sound, the symbol for the alarm repeat function ( ), the alarm symbol ( ) and “FM” will appear on the top left of the display.

− If you would like to deactivate the alarm, tap the button again.The symbol for the alarm repeat function ( ), the alarm symbol ( ) and the note symbol ( ) or “FM” will disappear on the LCD.

Deactivating the alarm − To permanently deactivate the alarm sound and

wake-up light, push the button 4 for approx. 3 seconds.The alarm will continue to be active and will sound at the same time the next day.

− To deactivate the alarm and wake-up light and activate the alarm repeat function, tap the button. The following will flash on the LCD 1 :

AFTER SALES SUPPORT

GB IRERadio


• Alarm symbol ( ) and alarm repeat symbol ( ) with alarm sound 09 (“beep”),

• Note symbol ( ) and alarm repeat symbol ( ) for alarm sounds 01–08,

• Alarm repeat symbol ( ) and, on the top left of the display, “FM” with the alarm sound 10 (radio).

The wake-up light will stay on with the set brightness. The alarm will repeat after 10 minutes have passed.

− If you don’t push a button, the alarm and light will continue to be active for 60 minutes after the set alarm time.

Radio − To activate the radio, push the button 14 .

The frequency will appear on the LCD 1 . − To improve reception, align the antenna cord 5

accordingly. − To decrease or increase the volume of the radio,

push the button 15 or the button 13 . − Push the button again to deactivate the radio.

Searching and saving radio stations1. To select a radio station (USW), push the button 11

or button 17 until you have found the desired frequency.


GB IRE Radio


To start searching for stations, push and hold the or button for approx. 3 seconds. The radio will stop scanning once it has located the frequency of the next radio station.

2. To save the located radio station, push and hold the button 14 for approx. 3 seconds. The number for

the channel will appear on the LCD 1 instead of the frequency. The “MEM” display next to it will start flashing.

3. To choose a number between 01 and 08, push the button 12 .

4. To save the radio station under the desired number, push the button again.

5. To subsequently select the channel when the radio is activated, push the button 12 until the desired number appears.

Sleep timer (radio)When the sleep timer function is activated, the radio will automatically deactivate after a preset time.

1. To set the sleep timer function for the radio, push the button 4 for approx. 3 seconds in radio mode. The screen for activating the sleep timer will appear on the LCD 1 (default setting: OFF).

AFTER SALES SUPPORT

GB IREUse as a light


2. To set the amount of minutes until the radio switches off, tap the button again. You can choose between 15, 30, 45 and 60 minutes. If you select OFF, the radio will continue to run until it is deactivated manually.

The display for activating the sleep timer will turn off after approx. 5 seconds.

Use as a lightThe sunrise alarm clock can also be used as a light.

− Tap the button 4 to switch the normal light on or off.

− Push the button 10 or button 18 to set the brightness.

Night lightThe sunrise alarm clock also has a night light in various colours.

1. To activate the night light, first switch the normal light off.

2. Push the button 10 . The night light will illuminate.

3. You can choose from the following colours for the night light by pressing the button again:


GB IRE Use as a light


Selection Colour Selection ColourC1 Red C5 Pink

C2 Green C6 Light blue

C3 Blue C7 White

C4 Yellow C8 automatic cycling through all colours

C0 Night light off*

*“C0” will disappear after a few seconds.

The brightness of the night light cannot be controlled.

Sleep timer (light)When the sleep timer function is activated, the light will automatically deactivate after a preset time.

The sleep timer function only works with the normal wake-up light and not with the night light.

1. To activate the sleep timer function for the light, push the button 4 for approx. 3 seconds while the light is on. The display for activating the timer will appear on the LCD 1 .

AFTER SALES SUPPORT

GB IRELCD backlight


2. To set the amount of minutes until the light switches off, tap the button again. You can choose between 15, 30, 45 and 60 minutes.If you select “OFF”, the light will illuminate until it is manually deactivated.

The display for activating the sleep timer will turn off after approx. 5 seconds.

LCD backlightYou can use the OFF/LO/HIGH slider 8 on the back of the alarm clock to control the backlight of the LCD 1 in 3 different levels.

• The backlight is deactivated in the “OFF” position. • In the “LO” position, the backlight is set to low

brightness.• In the “HI” position, the backlight is set to

maximum brightness.

Resetting the settings − If irregular characters appear on the LCD 1

or the sunrise alarm clock does not respond to your entry, push the RESET button 7 on the back of the sunrise alarm clock. This will reset the microprocessor.

Please keep in mind that all settings (time, alarm, etc.) will be lost during a reset.


GB IRE Battery operation


Battery operationTo ensure that the alarm continues to function after a power failure, the sunrise alarm clock is equipped with three 1.5 V type AAA batteries as a back-up.

In battery operation, only the clock and a single alarm sound (“beep”) are acti-vated. In the event of a power failure, the beep alarm will always activate at the set time (even if you have selected a different alarm sound). The wake-up light and LCD backlight will not work in battery operation. The radio and use as a light are not possible in battery operation.

Changing the batteryFrom time to time, check the back-up batteries so that the clock of sunrise alarm clock continues to operate in the event of a power failure and the alarm will sound. To do so, proceed as follows:

1. Open the cover of the battery compartment in the base 3 .

2. Insert new batteries (three 1.5 V type AAA batteries) with the correct polarity.

3. Put the cover back on.

AFTER SALES SUPPORT

GB IRECleaning


Cleaning

NOTICE!

Risk of short circuit! Water that has penetrated the housing may cause a short circuit.

− Never submerge the sunrise alarm clock in water or other liquids.

− Make sure that no water or other liquids penetrate the housing.

NOTICE!

Risk of damage!Improper cleaning may damage the sunrise alarm clock.

− Do not use any aggressive cleaners, brushes with metal or nylon bristles or sharp or metallic cleaning utensils such as knives, hard scrapers and the like. They could damage the surfaces.

− Make sure that no drops of water remain on the display. Water may cause permanent discolouration.


GB IRE Storage


− Do not apply pressure to the display when cleaning.

1. Disconnect the sunrise alarm clock from the mains before cleaning.

2. Only clean the surface of the sunrise alarm clock with a soft, damp, lint-free cloth.

Storage − Disconnect the sunrise alarm clock from the mains if

you are not using it for a prolonged period of time. − Store the sunrise alarm clock in a dry, frost-free

place. Also make sure that the sunrise alarm clock is not exposed to temperatures below –10 °C or above 40 °C and is not exposed to direct sunlight when in storage.

TroubleshootingFault Possible cause and solution

The sunrise alarm clock is not working.

The mains cord 2 is not properly inserted in the female plug 6 of the sunrise alarm clock or the mains adapter is not properly connected with the socket.

− Make sure that the female plug and the mains adapter are correctly inserted.

AFTER SALES SUPPORT

GB IRETroubleshooting


The sunrise alarm clock is not working.

There is currently a power failure.

− Check the power supply by connecting another device to the socket.

The mains adapter is damaged.

− Contact the service address provided on the warranty card.

Different functions cannot be adjusted.

The sunrise alarm clock is in battery operation and as a result, not all functions are available.

− Connect the sunrise alarm clock to a socket.

The microprocessor in the sunrise alarm clock must be reset.

− Push the RESET button 7 on the back of the sunrise alarm clock or pull the mains adapter out of the socket and then connect the sunrise alarm clock to the mains. As a result, the sunrise alarm clock will be reset to the factory settings.


GB IRE Troubleshooting


The light will not illuminate if the wake-up alarm is triggered.

The brightness has been set too low or the wake-up light is deactivated.

− Set the brightness or activate the light as described in the chapter “Operation”.

The alarm clock does not sound when the wake-up alarm is triggered.

The volume has been set too low or the sound as a wake-up alarm has been deactivated.

− Set the volume or activate the sound as described in the chapter “Operation”.

If you selected the radio as an alarm sound, the radio may be defective.

− Push the button 14 after you have switched off the alarm clock. If the radio still doesn’t work, contact the service address specified on the warranty card.

AFTER SALES SUPPORT

GB IRETroubleshooting


The radio crackles or is not working.

The radio signal is too weak.

− Set the frequency as described in the chapter “Radio”.

− Adjust the position of the antenna cord 5 .

The radio function is defective.

− Contact the service address provided on the warranty card.

The alarm was activated the day before, but not today.

The alarm function is disabled.

− Set the alarm function for the next day and the next time it activates, switch the alarm sound and light off by pushing or holding down the button 4 . The alarm will continue to be active and will sound at the same time the next day.

The volume and/or brightness are set too low.

− Set the volume and/or brightness as described in the chapter “Operation”.


GB IRE Troubleshooting


The alarm was activated the day before, but not today.

The power supply was interrupted and the back-up batteries ran out.

− Connect the sunrise alarm clock to the mains and set it again if necessary.

The wake-up light turns on too early or too late.

The selected brightness is not suitable for you.

− Select a higher brightness if you wake up too late or a lower intensity if you wake up too early. (See chapter “Operation” for the setting.)

The sunrise alarm clock is not level with your head.

− Make sure that the sunrise alarm clock is in line with your head and that it is not covered by bed or your blanket or pillow.

AFTER SALES SUPPORT

GB IRETechnical data


Technical dataSunrise alarm clock:

Model: AE6-WEL-27Article number: 93660

Mains adapter:

Manufacturer: Dong Guan City Gang Qi Electronics Co., Ltd.

Model/type: GQ05-075050-ABInput: 100–240 V~/50–60 Hz,

0.3 A max.Output: 7.5 V 500 mA

Batteries: 3× 1.5 V type AAA batteries(3× 1.5 V DC 50 μA LR03/R03/AAA)


GB IRE Declaration of conformity


Declaration of conformityEMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Ecodesign Directive 2009/125/EC, RoHS Directive 2011/65/EU:

Short text of the declaration of conformity: Krippl-Watches hereby declares that the sunrise alarm clock (model no. AE6-WEL-27) complies with the fundamental requirements and other applicable provisions of the directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.

You can access the complete text for the declaration of conformity on our website:

http://www.produktservice.info

EAN: 20036508

DisposalDisposing of the packaging

www.recyclenow.com

BOXCARDwidely

recycled

TRAYPLASTIC

check localrecycling

BLISTER

Dispose of the packaging separated into single type materials. Dispose of card-board and carton as waste paper and foils via the recyclable material collection service.

AFTER SALES SUPPORT

GB IREDisposal


Disposing of the sunrise alarm clock(Applicable in the European Union and other European states with systems for the separate collection of reusable waste materials)

Old devices must not be disposed of with household waste! This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This sunrise alarm clock must be disposed of at a designated collection point. This can occur, for example, by handing it in at an authorised collecting point for the recycling of waste electrical and electronic equipment. Improper handling of waste equipment may have negative consequences for the environment and human health due to potentially hazardous substances that are often contained in electrical and electronic equipment. By properly disposing of this product, you are also contributing to the effective use of natural resources. You can obtain information on collection points for waste equipment from your municipal administration, public waste disposal authority, an authorised body for the disposal of waste electrical and electronic equipment or your waste disposal company.


GB IRE Disposal


Batteries and rechargeable batteries must not be disposed of with household waste!

As the end user you are required by law to bring all batteries and rechargeable batteries, regardless whether they contain harmful substances* or not, to a collection point run by

the communal authority or borough or to a retailer, so that they can be disposed of in an environmentally friendly manner. Only turn in the batteries at your collection point in a discharged state.

* labelled with: Cd = cadmium, Hg = mercury, Pb = lead

GB IRE

3 YEARS

WARRANTY

Description of malfunction:

If after contacting the manufacturer you are re-quested to return the faulty product please return the completed warranty card together with it.

Krippl-Watches Freepost code: RLTU-ZYZE-SKLG Picadilly 180 W1J 9HF London UNITED KINGDOM

[email protected]

Your details:

Name Address

E-mail Date of purchase*: * We recommend you keep the receipt with this warranty card.

Location of purchase

Phone lines available Monday to Friday, 7am–7pm.

Toll-free hotline. Calls from mobiles may vary.

WARRANTY CARD

AFTER SALES SUPPORT

MODEL: AE6-WEL-27 PRODUCT CODE: 93660 10/2016

www.produktservice.info00800 52323000GB IRE

Mit Ausnahme von Aldi Süd verwenden alle anderen Länder das Sempre Logo mit „R“.

SUNRISE ALARM CLOCK WITH MUSICAL ALARM AND RADIO

GB IRE

Warranty conditionsDear Customer,

The ALDI warranty offers you extensive benefits:

Warranty period: 3 years from date of purchase.

Costs: Free repair/exchange. No transport costs.

Hotline: Toll-free hotline.

ADVICE: Please contact our service hotline by phone, e-mail or fax before sending in the device. This allows us to provide support in the event of possible operator errors.

In order to make a claim under the warranty, please send us:

• the faulty item together with the original purchase receipt and the completed warranty card.

• the product with all components included in the packaging.

The warranty does not cover damage caused by:

• Accident or unanticipated events (e.g. lightning, water, fire).

• Improper use or transport. • Disregard of the safety and maintenance

instructions.• Other improper treatment or modification.

GB IRE

After the expiry of the warranty period, you still have the possibility to have your product repaired at your own ex-pense. If the repair or the estimate of costs is not free of charge you will be informed accordingly in advance.This warranty does not affect your statutory rights. In the event that a product is received for repair, neither the service company nor the seller will assume any liability for data or settings possibly stored on the product by the customer.

Spend a little Live a lot.

Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 3 years after date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product, please contact us via our helpline support services, details of which are to be found both in this manual and on the product itself.

PRODUCED IN CHINA FOR:ALDI STORES LTD. PO BOX 26, ATHERSTONEWARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.PO BOX 726, NAAS, CO. KILDARE.Visit us at www.aldi.com

AFTER SALES SUPPORT

MODEL: AE6-WEL-27 PRODUCT CODE: 93660 10/2016YEARS

WARRANTY

GB IRE

www.produktservice.info

00800 52323000IREGB 3

Documents

User Manual - KRIPPL-WATCHES · 2016-05-20 · user manual carefully, particularly the safety notes. Failure to heed this user manual may result in severe injury or to damage to the