200W Explosion Proof LightWIFI-CON

User ManualPart Number:

Important: Read all instructions prior to installation. EPL-NW200

Summary

Specifi cations

Installation

Mounting Examples

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev Date: V1 08/08/2016

Explosion-proof lighting is critical in environments where volatile fl ammable liquids or fl ammable gases and vapors are present. This LED explosion-proof light is safe to use in Class 1, Div 2 locations, such as oil refi neries, paint booths, fuel and chemical storage areas, and grain processing plants. The waterproof fl ood light has a vibration-resistant die cast aluminum housing and tempered glass lens to protect internal components and is designed to last.

EPL-NW200Intensity 18125 lumenReplacement For 400 Watt MHTotal Power Consumption 187.1 WattsOperating Voltage Range 120~277 VACBeam Angle 120 degreeLED Type & Quantity 3535 SMD x 156pcsColor Temperature 4300 KCRI 68 CRIOperating Temperature -22~122°F (-30~50 °C)IP Rating IP68LED Lifetime 50,000 HoursFixture Weight 26.5lbs (12.0Kg)Warranty 5 Year

Mounting the EPL-NW200 off ers several mounting options including ceiling mounting, pole mounting, pendant mounting, and wall mounting. Ceiling and wall applications are mounted using the adjustable swivel mount bracket found on the rear of the unit. Pendant and pole mounting applications are mounted from the ceiling or railing and are suspended by a rigid pipe via the 3/4” NPT hub on the back of the explosion proof fi xture. Wiring is fed through rigid pipe to the junction box and tied in to the fi xture’s lead wires, completing the electrical connection. See examples of mounting methods to the right.

• This product should be installed by a fully certifi ed electrician in accordance with local building and electrical codes. Electrician should be familiar with operation of the product and the hazards involved.

• Due to risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures. All electrical connections must be in 3/4” NPT conduit or pipe.

• Failure to properly support the fi xture during installation may cause damage or injury, for which the manufacturer is not responsible. Ensure the mounting method chosen will support the weight of the fi xture.

Warnings

Mounting

5yrSTANDARD

844

4

Installation:

- Fixture is equip with Bracket - Connection outlet : NPT 3/4” - Conduit and pole is not included in products. - All installation must conduct by qualify electrician. Mounting option Available: No. Model No. Option Available 1 CES-J40S A, B, C, D, F, G 2 CES-J100 A, B, C, D, E, F, G 3 CES-J200 A, B, C, D, E, F, G (Note: U-Bracket Mounting option is not available for CES-J40S)

4

Installation:

- Fixture is equip with Bracket - Connection outlet : NPT 3/4” - Conduit and pole is not included in products. - All installation must conduct by qualify electrician. Mounting option Available: No. Model No. Option Available 1 CES-J40S A, B, C, D, F, G 2 CES-J100 A, B, C, D, E, F, G 3 CES-J200 A, B, C, D, E, F, G (Note: U-Bracket Mounting option is not available for CES-J40S)

4

Installation:

- Fixture is equip with Bracket - Connection outlet : NPT 3/4” - Conduit and pole is not included in products. - All installation must conduct by qualify electrician. Mounting option Available: No. Model No. Option Available 1 CES-J40S A, B, C, D, F, G 2 CES-J100 A, B, C, D, E, F, G 3 CES-J200 A, B, C, D, E, F, G (Note: U-Bracket Mounting option is not available for CES-J40S)

4

Installation:

- Fixture is equip with Bracket - Connection outlet : NPT 3/4” - Conduit and pole is not included in products. - All installation must conduct by qualify electrician. Mounting option Available: No. Model No. Option Available 1 CES-J40S A, B, C, D, F, G 2 CES-J100 A, B, C, D, E, F, G 3 CES-J200 A, B, C, D, E, F, G (Note: U-Bracket Mounting option is not available for CES-J40S)

4

Installation:

- Fixture is equip with Bracket - Connection outlet : NPT 3/4” - Conduit and pole is not included in products. - All installation must conduct by qualify electrician. Mounting option Available: No. Model No. Option Available 1 CES-J40S A, B, C, D, F, G 2 CES-J100 A, B, C, D, E, F, G 3 CES-J200 A, B, C, D, E, F, G (Note: U-Bracket Mounting option is not available for CES-J40S)

U-Bracket Ceiling Mount Pendant Mount

Pole Mount

Wall Mount

U-Bracket Wall Mount

200W Explosion Proof LightWIFI-CON

User ManualPart Number:

Important: Read all instructions prior to installation. EPL-NW200

Dimensional Drawings

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

Rev Date: V1 08/08/2016

5yrSTANDARD

844