User Guide - GPO Display | Visual Solutions€¦ · Mento-Pen2.0 offers the functions listed below. All functions can be used by selecting the corresponding icons in menu bar. 2.1

www.gpodisplay.com Mento-Pen

Interactive whiteboard software

Before operating the unit, please read this manual thoroughly, and retain it for future reference

User Guide [Meto-Pen]


Introduction

☞ Mento-Pen is software for writing & drawing on touch screens, saving notes/annotation onscreen and other functions ☞ Mento-Pen maximizes the impact of E-Whiteboards in educational settings

Program Disc USB Unlock dongle


Installation requirements for Mento-Pen 2.0

Hardware

PC supported (Windows XP and above) CPU Intel Pentium 4 1.4Ghz, AMD Athlon XP 1500+ or above RAM 512MB (Window version of vista or above will need 1GB of memory.) or above Over 1GB extra room of hard disk. Depending on the amount of data to be saved, more space on hard disk may be necessary. Resolution of video card : 640X480 or above.

Software

OS: MS-Windows XP, MS-Windows Vista MS-Windows 7, MS-Windows 8 32/64bit Windows Installer 3.1 NET Framework 3.5 SP1 / 4.0


Mento-Pen Installation

1. Installation files

1.1 Installation files consist of “setup.exe” and “MentoPen2Setup_New.msi”. “setup.exe” 1.2 In the event that “.NET Framework 3.5” is in the installation program, please run “setup.exe”. 1.3 In the event that “.NET Framework 3.5” is not in the installation program, Mento-Pen 2.0 may not work properly. Download and install “.NET Framework 3.5” from http://www.anamit.com. Installation time depends on PC specifications.

2. Program Installation

2.1 When you perform "setup.exe", ".NET Framework" installation window that asks whether you want to accept. Please choose [Accept]



2.2 NET Framework automatically downloads and installs from link on website. While .NET Framework 3.5 is installing, those running versions of Windows OS pre-Windows7 may be subject to longer installation times.

2.3 When .NET Framework 3.5 installation is complete, Mento-Pen 2.0 installation will start.

2.4 This screen is shown at completion of installation. Please choose [Close]



2.5 After Installation is complete, there is "Mento-Pen 2.0“ icon on the screen of your computer

Installation information

Installation route C:\Program Files\AnamIT\MentoPen2 Library C:\Library C:\Library\Content01 : Textbook C:\Library\Content02 : Lesson C:\Library\Content03 : multimedia


Operation

1.1 Execute Mento-Pen2.0 icon on wallpaper.

1. Start

Note. This program can be played when Mento-Pen2.0 unlock dongle and touch sensor of interactive whiteboard's cable are connected to PC's USB port.

1.2 Mento-Pen 2.0 main menu icons

ICON Main Menu Functions

Line drawing Straight, Vertical, Horizontal, Round, Square, Free Drawing

Pen Normal, Highlighter

Pen color Black, White, Blue, Red (total 27 colors)

Line Thickness Thickness level 1 ~ 45

Eraser Normal, Portion, All Eraser

Board Screen Green, White, Black, Blue, background color (total 8 colors)

Recording Compatible files : AVI, WMV, FLV, SWF

Saved List View Saved screen list view

Library Contents library function

Toolbar Switch Movable Toolbar, Left,/Right side, Top/Bottom side


Operation

ICON Main Menu Functions

Mode Switch Writing, Window mode

Partial Capture Save selected portion

Multi Writing Up to 10 points at the same time

Virtual Keyboard Open virtual keyboard

Window Explorer Open Windows explorer

Internet Explorer Open Internet Explorer

Calculator Open calculator

Document Word document shortcuts

Print Print the current screen

JPG saving Save the writing screen to JPG file

Sensor setting Setting program for Interactive whiteboard camera sensor

Program info. Mento-Pen 2.0 Program info.

Configuration Configuration for Mento-Pen 2.0 user

Close Program Closing


Operation

2. Specific Icon Functions

Mento-Pen2.0 offers the functions listed below. All functions can be used by selecting the corresponding icons in menu bar.

2.1 Line Drawing

Select the type of lines.

Specific functions

ICON Menu Functions

Free Drawing Free drawing

Straight Line Draw the straight by connecting two end points.

Vertical Draw vertical line by connecting two end points.

Horizontal Draw horizontal line by connecting two end points.

Round Draw circles by connecting two end points.

Square Draw squares by connecting two end points.


Operation

2.2 Pen type

Select the type of pens.

Specific functions

ICON Menu Functions

Normal Pen Stylus or finger are used for writing.

Highlight Pen Highlighter (translucent color)

) Select Select area and control movement/size


Operation

2.3 Pen Color

Select colors

Specific functions

ICON Menu Functions

27 Pen Colors

2.4 Line Thickness

Select line thickness

Specific functions

ICON Menu Functions

The range of line thickness : 1~45


Operation

2.5 Eraser : Erase the drawing and writing

Select the Eraser

Specific functions

ICON Menu Functions

Normal Eraser Normal eraser function

Unit Eraser Erase selected area

All Eraser Erase all drawing/ writing

2.6 Board Screen

Select the board color

Specific functions

ICON Menu Functions

select 8 board colors and saved image


Operation

2.7 Recording : Record content displayed on screen

Select the Record

Specific functions

2.8 Saved List View

Specific functions

ICON Menu Functions

Move to other saved pages

Show the saved page list view after writing and move to other saved pages

ICON Menu Functions

Rec.

Record screen function. Select Type/Size, Frame, Audio Input functions

Stop.

Shows saved page list. Note. Saved list will be deleted after closing Mento-Pen2.0.


Operation

2.9 Library

Select the Content Library

Specific functions

2.10 Toolbar Switch : Change the location of toolbar.

Specific functions

ICON Menu Functions

Movable toolbar

Left side fixed

ICON Menu Functions

Content Library Textbook, Lesson, Multimedia library. Select the saved content

Note. When running image or video files from menu [Library>Multimedia], you can zoom in/out using two point touch gesture.

Select the Contents Library


Operation

2.10 Toolbar Switch

Specific functions ICON Menu Functions

Right side fixed

Top side fixed

Bottom side fixed

2.11 Mode Switch : Writing / Windows mode switch

Specific functions

ICON Menu Funcions

Windows mode Mode for using windows functions

Writing mode Mode for using writing functions


Operation

2.12 Multi Writing : Up to 10 points at the same time (when supported by display)

Specific functions ICON Menu Functions

Multi writing Run multi writing program

When Multi writing is selected, the window shown below will appear. Multi-writing allows for multiple user to simultaneously use pen, eraser, color and thickness functions.


Operation

2.13 Printer : Print the current screen

Specific functions

ICON Menu Functions

Printer Print the current screen

2.14 Shortcut Menu : Shortcut function for writing mode and windows mode

ICON Menu Functions

Virtual Keyboard Open virtual keyboard

Window Explorer Enter Windows Explorer

Internet Explorer Open Internet Explorer

Calculator Open calculator

Document Play Word , PPT document


Operation

2.15 JPG Saving: save the current screen to JPG file

Specific functions

ICON Menu Functions

JPG saving Save the current screen to JPG file

2.16 Sensor Setting: Setting program for interactive whiteboard camera sensor and configuration for Mento-pen 2.0 user.

ICON Menu Functions

Configuration Configuration for Mento-Pen user

T3000 Setting program for Interactive

whiteboard camera sensor

Sensor settings screen when the program is executed.


Operation

Select calibration to reset sensor coordinates.

Follow the blinking red cross. A beep will sound as soon as you presses the blinking red cross. Another will sound as you take the pointer off the screen. Move to another blinking red cross. There are nine crosses in total.


Operation

Specific functions

2.17 Partial Capture Setting: Save selected portion on writing area.

ICON Menu Functions

Partial Capture Save selected portion

Specific functions

2.18 Close : Close Mento-Pen 2.0

ICON Menu Functions

Close program


Operation

Specific functions

2.19 The bottom of Menu

ICON Menu Functions

Undo Undo writing

Redo Redo writing

Save Save writing

Load Load writing

Extension/ contraction

Extension/contraction of writing board


Operation

3. Content Library

3.1 Content Library consists of textbook library, lesson library and multimedia library.

3.2 In the picture to the right, the left list shows categories and list on the right shows the content of the selected category.

3.3 Click "+" button on the bottom of category to add a category.


Operation

3.4 Click "-” button the below category to delete a category.

3.5 Click "Pen mark" button below category to change a category name

3.6 Click "Rotation mark" button below category to refresh a category list.


Operation

3.7 Find content using the search section on the top portion of content list and double-click the selected content to execute.

3.8 Click "+" button on the bottom of content list to add content

3.9 Click "-" (second button on the bottom of content list) to delete a piece of content


Operation

3.10 Click "Pen mark" third button on the bottom of content list to change content name.

3.11 Click "Rotation mark" forth button on the bottom of content list to refresh content

3.12 If you double-click an item in the content list, selected content will begin playback.

Note. The screens shown to the right shows a static image. As mentioned, icons consist of [Move/Write], [All Eraser], [Close] button. [Move/Write] button is a toggle-type button and can be applied to images or video


Operation

In addition, images can be zoomed in/out through gesture.

* The picture to the left shows a video being played.

* *While playing videos, you can zoom in/out through gesture.

Documents

User Guide - GPO Display | Visual Solutions€¦ · Mento-Pen2.0 offers the functions listed below. All functions can be used by selecting the corresponding icons in menu bar. 2.1