USER GUIDE 2.6APPLE FINAL CUT PRO X

• Adobe® Premiere Pro 12 or later• Adobe® Lightroom® 7.4 or later• Adobe® Lightroom® 2015.1 to 2015.14(Stand alone versions 6.0 to 6.14)• Apple Final Cut Pro X 10.4.5.• Windows® 10, Windows® 8.1, Windows® 7• Mac® OS 10.12 and 10.13

CONNECTING AND SETTING UP LOUPEDECK+

We know you may be eager to begin editing with your Loupedeck+, however you must first download the Loupedeck software. Internet connection is required to download the software

How to Set up your Loupedeck+:

1. Download & install the latest Loupedeck software v 2.6 by visitingwww.loupedeck.com/setup2. Connect the USB cable to your computer’s USB port

How to Set up your Loupedeck+ with Apple Final Cut Pro X:

1. Make sure you're using English keyboard layout2. Go to System Preferences -> Keyboard -> Input Sources ->

Push “Add”3. Select “English ABC" or "English ABC Extended” and accept

Color Wheels:

1. Open Final Cut Pro X2. Go to Final Cut Pro -> Preferences -> General ->Color Correction3. Select “Color Wheels” and accept

LOUPEDECK+ AND FINAL CUT PRO X

The Loupedeck+TM console for Adobe Lightroom Classic CCTM, Aurora HDR, Adobe Premiere Pro CC and Final Cut Pro X. Final Cut Pro X is the latest software to be integrated, making the Loupedeck+ compatible with both photo and video.

Within this user guide you will learn how to setup your Loupedeck+ with Final Cut Pro X as well as the basic functions needed to begin the editing process. Please read this user guide to its entirety, so you can experience everything the Loupedeck+ has to offer.

Loupedeck+ works seamlessly with MacOS and Windows operating systems, running the software versions listed below:

Color explanations :

BASIC LAYER

FN LAYER

CUSTOM MODE LAYER

CUSTOM MODE FN LAYER

WORKING WITH LOUPEDECK+

In Final Cut Pro X, Loupedeck is fully customizable to match your personal editing workflow. We have selected some factory default functions, so you can begin editing immediately.

We have also added printable cheat-sheets to help guide you through your first steps of using Loupedeck+. For your own settings, please print blank Loupedeck+ layout sheets, located on the last page.

Loupedeck+ has basic commands such as, exposure and contrast on the default layer. Pressing FN and using the same dials and buttons will create a second layer, called the FN layer.

Loupedeck+ also has a “Custom Mode” which can be activated by pressing the “Custom Mode” button (LED will be lit when Custom Mode is activated). This will open all of the dials for extra customization as a third layer. When “Custom Mode” is enabled by pressing FN, you will have an alternative “Custom Mode” with FN, which makes four different layers of possibilities to master Final Cut Pro! When using “Custom Mode”, all functions on buttons D1 and D2 dials are the same as in the default layer. When “Custom Mode” with FN is activated, all of the functions on buttons D1 and D2 dials are the same as in the FN layer.

By starting to use Loupedeck+ in steps you will experience a fast and more efficient learning curve!

HOW TO CUSTOMIZE YOUR SETTINGS?

After installing Loupedeck+ your application will appear as below:

Within the upper right corner, you will find the Device and Application dropdown menus. From the Application menu select “Final Cut Pro X”

On the configuration UI: Click the button you wish to configure with your mouse. Some buttons and dials are grouped together. If you click on the “Control Dial” the following dialog will open:

Within the left column, you will find the current functions for buttons and dials. In the middle column you can select different Final Cut Pro X functions. Currently, Command is marked with an arrow under the function (rotate or press).

“Search for Action”, is recommended due to the large amount of Final Cut Pro X functions listed within Loupedeck configuration software.

Please note, in some cases the naming of the function within the Loupedeck+ configuration software differs from the naming presented in Final Cut Pro X.

You will find the second level by clicking FN-switch from bottom-left corner. All of these commands are available in Loupedeck+ when you have FN button pressed down.

All changes are automatically saved, no additional actions are necessary to apply changes. When “Cancel” is pressed all changes will be discarded.

BASIC LAYER FACTORY DEFAULT FUNCTIONS

PASTE

COPY PASTE SELECTCLIP

MATCH FRAMEFn

IN OUT

BLADE

DELETE

ARROW

TOOL

TRIM TOOL

RANGE TOOL

GO TO NEXT / PREVEDIT POINT

STEP BACK 1 FRAME

PRESS:TOGGLES BETWEEN

ZOOM TO FIT & ZOOM

STEP FORWARD1 FRAME

PREVIOUSEDIT POINT

NEXTEDIT

POINT

PLAYFULLSCREEN

TIMELINE

LIBRARY WINDOW

VIEWERWINDOW

INSPECTOR

ADD/BASIC LOWER

THIRD

SELECT ALL

ADDKEYFRAME

TRIMSELECTION

NAVIGATE1 FRAME

ROTATE: GO TO NEXT/

PREVIOUS10 FRAMES

PRESS:BLADE

TOGGLEMATCHCOLOR

ROTATE: ZOOM

PRESS:TRIM TO PLAYHEAD

FN LAYERFACTORY DEFAULT FUNCTIONS

PASTEATTRIBUTES

Fn

IMPORT

GO TO SEQUENCE START

CLEARIN

CLEAROUT BLADE

ALL TRACKS

INSERT

MUTE

TRIMSELECTION

DESELECTALL

PREVIOUSKEYFRAME

CHANDEMARKER

GO TO NEXT/PREVIOUS10 FRAME

NUDGE CLIPSELECTION UP

NUDGE CLIPSELECTION

DOWN

NUDGE CLIPSELECTIONLEFT ONE

FRAME

NUDGE CLIPSELECTIONRIGHT ONE

FRAME

HIGHLIGHTS:Y AXIS

HIGHLIGHTS:X AXIS

MIDTONES:X AXIS

HIGHLIGHTS:BRIGHTNESS

(Z)

CHANGEKEYFRAME

NAVIGATE10 FRAMES

NUDGEHORIZONTALLY

NUDGE MANYVERTICALLY

NUDGEVERTICALLY

NUDGEMANYHORIZONTALLY

GO TO NEXT/ PREV

MARKER

DELETE

GO TO SEQUENCE END

COPYATTRIBUTES

TRANSITION

AUDIOEDITOR NEXT

KEYFRAME

CUSTOM MODE LAYERFACTORY DEFAULT FUNCTIONS

COLOR WHEELSHADOWS R

ADJUSTVOLUME

COLOR WHEELSHADOWS B

COLOR WHEELSHADOWS G

COLOR WHEELMIDTONES B

COLOR WHEELMIDTONES G

COLOR WHEELMIDTONES R

COLOR WHEELHIGHLIGHTS B

COLOR WHEELHIGHLIGHTS G

COLOR WHEELHIGHLIGHTS R

CUSTOM MODE WITH FN LAYERFACTORY DEFAULT FUNCTIONS

MASTER

COLOR WHEEL R

Fn

MASTER

COLOR WHEEL B

MASTER

COLOR WHEEL G

GENERAL BUTTONS

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION

FUNCTION

CUSTOM MODE

UNDO

REDO

CUT

COPY

PASTE

PASTE ATTRIBUTES

EXPORT

IMPORT

FULL SCREEEN

OPENS SECOND (Fn) LEVEL OF COMMANDS

PRESSING CUSTOM MODE OPENS THIRD LEVEL OF COMMANDS WHICH INCLUDES ALL BASIC DIALS. LED LIGHT INDICATES WHEN CUSTOM MODE IS ACTIVATED

PRESSING UNDO WILL REVERT THE EDIT MADE

PRESSING FN + UNDO WILL REVERT THE EDIT MADE

DELETES SELECTED MATERIAL OR MATERIAL BETWEEN IN AND OUT PUT. LEAVES A CAP TO TIMELINE. SAME FUNCTION ALSO UNDER FN+C6

COPIES SELECTED MATERIAL FROM TIMELINE

PASTES COPIED MATERIAL TO TIMELINE WHERE YOUR PLAYHEAD IS LOCATED

TRIGGERS POP-UP WHERE YOU CAN SELECT WHICH ATTRIBUTES WILL BE COPIED. WHEN WORKING WITH COLOR GRADING, COPY LUMETRI EFFECT BY SELECTING EFFECT ATTRIBUTES OR CLIP VOLUME AND APPROVE SELECTION. IF YOU HAVE ALREADY APPLIED LUMETRI EFFECT TO A CLIP THAT YOU ARE PASTING ATTRIBUTES TO, A DUPLICATE LUMETRI EFFECT WIL BE CREATED, WHICH IS NOT ADVISED.

PRESSING EXPORT OPENS THE EXPORT SETTINGS WINDOW

OPENS THE IMPORT WINDOW

PRESSING SCREEN MODE CREATES A FULL SCREEN

FN

CUSTOM MODE

UNDO

REDO

FN + REDO

COPY

PASTE

FN+PASTE

EXPORT

FN + EXPORT

FULL SCREEN MODE

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION´

NAVIGATING

FAST BACKWARDS. PRESS 2 OR MORE TIMES AND SPEED WILL INCREASE

PLAY AND STOP IN TIMELINE, SOURCE MONITOR AND PROGRAM MONITOR

FAST FORWARD. PRESS 2 OR MORE TIMES AND SPEED WILL INCREASE

SELECT CLIPS IN TIMELINE

LETS YOU PASTE MATERIAL INTO SEQUENCE

PRESSING --/COL TOGGLES MATCH COLOR

GO BACK ONE FRAME IN TIMELINE, SOURCE MONITOR OR PROJECT MONITOR

GO FOWRARD ONE FRAME IN TIMELINE, SOURCE MONITOR OR PROJECT

JUMP EASILY TO NEXT EDITPOINT IN TIMELINE. REMEMBER TO HAVE RIGHT TRACKS ACTIVE

JUMP EASILY TO PREVIOUS EDITING POINT IN TIMELINE. REMEMBER TO HAVE RIGHT TRACKS ACTIVE

MOVES SELECTED CLIP(S) IN TIMELINE ONE FRAME TO LEFT

MOVES SELECTED CLIP(S) IN TIMELINE ONE FRAME TO RIGHT

MOVES SELECTED CLIP(S) TO VIDEO/AUDIO TRACK UNDERNEATH

MOVES SELECTED CLIP(S) TO VIDEO/AUDIO TRACK ABOVE

RED LINE (1)

YELLOW LINE (2)

GREEN LINE (3)

BLUE LINE (4)

PURPLE LINE (5)

-- / COL

ARROW RIGHT ( > )

ARROW LEFT ( < )

ARROW DOWN ( v )

ARROW UP ( ^ )

FN + ARROW LEFT ( < )

FN + ARROW RIGHT ( > )

FN + ARROWDOWN ( v )

FN + ARROW UP ( ^ )

SHUTTLE LEFT

PLAY-STOP TOGGLE

SHUTTLE RIGHT

SELECTION TOOL

PASTE

TOGGLE MATCH COLOR

BACK 1 FRAME

STEP FORWARD 1 FRAME

GO TO NEXT EDIT POINT

GO TO PREVIOUS EDIT POINT

NUDGE CLIP SELECTION LEFT ONE FRAME

NUDGE CLIP SELECTION RIGHT ONE FRAME

NUDGE CLIP SELECTIONDOWN

NUDGE CLIP SELECTION UP

SELECT SELECT TOOL

SELECT TRIM TOOL

GO TO SEQUENCE START

RANGE SELECTION TOOL

GO TO SEQUENCE END

CONTROL DIAL

SELECT NEXT EDIT

ZOOM

CHANGE MARKER

GO TO NEXT / PREVOUS 10 FRAMES

GO TO NEXT OR PREVIOUS FRAME

TRIM

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION

LETS YOU TO SELECT AND MOVE CLIPS

ALLOWS YOU TO CHANGE CLIPS IN AND OUT WITHOUT CHANGING DURATION OF THE CLIP.

LETS YOU JUMP DIRECTLY TO BEGINNING OF A SEQUENCE.

WITH RANGE SELECTION TOOL YOU'RE ABLE TO SELECT PART OF CLIP

LETS YOU JUMP DIRECTLY TO END OF A SEQUENCE

ROTATING CONTROL DIAL WILL GO TO NEXT OR PREVIOUS EDIT POINT.

FN + ROTATING CONTROL DIAL WILL GO TO NEXT EDIT AND SELECT IT

LETS YOU ZOOM YOUR TIMELINE

ROTATING WILL NAVIGATE BETWEEN MARKERS

ROTATING D2 WILL GO BACK OR FOWARD IN TIMELINE 10 FRAMES. PRESSING D2 SPLITS THE CLIP FROM PLAYHEAD

PRESSING FN + ROTATING D2 WILL GO TO NEXT OR PREVIOUS FRAME.

ROTATING DIAL WILL MOVE 1 FRAME AND PRESSIN WILL MAKE A TRIM.

L1

L2

FN + L2

L3

FN + L3

CONTROL DIAL

FN + CON-TROL DIAL

D1

FN + D1

D2

FN + D2

CLARITY

CUSTOMIZABLE BUTTONS (L1-L3) AND DIALS (CONTROL DIAL, D1 & D2)

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION´

CUSTOMIZABLE BUTTONS (C1-C6)

SELECTS THE CLIP WHERE PLAYHEAD IS LOCATED

OPENS TO THE EXACT FRAME AS SOURCE MONITOR WHEREPLAYHEAD IS LOCATED IN SEQUENCE. LETS YOU EASILY VIEWYOUR MATERIAL WHITOUT OPENING IN SEQUENCE.

LETS YOU CHOOSE EXACT POINT FROM TIMELINE, SOURCE MONITOR OR PROGRAM MONITOR. EASY TO COPY AND PASTE MATERIAL FROM ONE POINT TO ANOTHER WITH HELP OF IN AND OUTPOINTS.

SAME AS MARK IN (INPOINT) BUT WORKS AS OUTPOINT

REMOVES SELECTED INPOINT. PRESSING DIAL WILL RESET

REMOVES SELECTED OUTPOINT. PRESSING DIAL WILL RESET

LETS YOU CUT TO SELECTED VIDEO OR AUDIO FRAME IN SEQUENCE.IF LINK IS ON, CUT WILL COME TO VIDEO OR AUDIO

MAKES A CUT TO ALL MATERIAL IN ACTIVE TRACKS IN SEQUENCE TO ALL TRACKS

PRESSING C6 OR FN + UNDO, DELETES SELECTED MATERIAL OR MATERIALS BETWEEN IN AND OUT POINTS. AUTOMATICALLY CLOSES CAP IN TIMELINE

INSERTS MEDIA FROM LIBRARY TO TIMELINE

C1

C2

C3

C4

FN + C3

FN + C4

C5

FN + C5

C6

FN + C6

SELECT CLIP AT PLAYHEAD

REVEAL IN BROWSER

MARK IN

MARK OUT

CLEAR IN

CLEAR OUT

BLADE AT PLAYHEAD

BLADE ALL

DELETE

INSERT MEDIA

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION

P1

P2

P3

P4

FN + P4

P5

FN + P5

P6

FN + P6

P7

CUSTOMIZABLE BUTTONS (P1-P8)

TIMELINE

EVENT LIBRARY

VIEWER

INSPECTOR

MUTE TRACK

GO TO COLOR BOARD

TRIM SELECTION

SELECT ALL

DESELECT ALL

ADD KEYFRAME

PRESSING P1 SELECTS TIMELINE

PRESSING P2 ACTIVATES EVENT LIBRARY

PRESSING P3 ACTIVATES PROGRAM MONITOR

PRESSING P4 ACTIVATES INSPECTOR WINDOW

PRESSING FN + P4 MUTES SELECTED CLIP / TRACK

PRESSING P5 OPENS COLOR BOARD

PRESSING FN + P5 TRIM SELECTED CLIP

PRESSING P6 SELECTS ALL MATERIAL IN SEQUENCE

D PRESSING FN + P6 ESELECTS ALL MATERIAL IN SEQUENCE

PRESSING P7 ADDS A KEYFRAME

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION

TEMPERATURE

TINT

EXPOSURE

CONTRAST

HIGHLIGHTS

SHADOWS

WHITES

BLACKS

SATURATION

BASIC CORRECTIONS & CREATIVE (BASIC DIALS)

´

ADJUSTS THE TEMPERATURE THE VIDEO CLIP

ADJUSTS THE TINT IN THE VIDEO CLIP

ADJUSTS THE EXPSOURE IN THE VIDEO CLIP

ADJUSTS THE CONTRAST IN THE VIDEO CLIP

ADJUSTS THE HIGHLIGHTS IN THE VIDEO CLIP

ADJUSTS THE SHADOWS IN THE VIDEO CLIP

ADJUSTS ADJUST VOLUME OF THE TRACK

ADJUSTS THE MIDTONES IN THE VIDEO CLIP

ADJUSTS THE SATURATION IN THE VIDEO CLIP

TEMPERATURE

TINT

EXPSOURE

CONTRAST

HIGHTLIGHTS

SHADOWS

ADJUST VOLUME

MIDTONES

SATURATION

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION

TEMPERATURE

TINT

VIBRANCE

CONTRAST

CLARITY

EXPOSURE

SHADOWS

HIGHLIGHTS

WHITES

CUSTOM MODE COLOR WHEELS (FIRST LAYER)

ROTATING TEMPERATURE WILL CONTROL HIGHLIGHT COLOR WHEEL BY INCREASING OR DECREASING RED COLOR

ROTATING TINT WILL CONTROL HIGHLIGHT COLOR WHEEL BY INCREASING OR DECREASING BLUE COLOR

ROTATING VIBRANCE WILL WILL CONTROL HIGHLIGHT COLOR WHEEL BY INCREASING OR DECREASING GREEN COLOR

ROTATING CONTRAST WILL CONTROL SHADOWS COLOR WHEEL BY INCREASING OR DECREASING RED COLOR

ROTATING CLRATIY WILL CONTROL SHADOWS COLOR WHEEL BY INCREASING OR DECREASING BLUE COLOR

ROTATING EXPOSURE WILL CONTROL SHADOWS COLOR WHEEL BY INCREASING OR DECREASING GREEN COLOR

ROTATING SHADOWS WILL CONTROL MIDTONES COLOR WHEEL BY INCREASING OR DECREASING RED COLOR

ROTATING HIGHLIGHTS WILL CONTROL MIDTONES COLOR WHEEL BY INCREASING OR DECREASING BLUE COLOR

ROTATING WHITES WILL CONTROL MIDTONES COLOR WHEEL BY INCREASING OR DECREASING GREEN COLOR

HIGHLIGHT COLOR WHEEL RED

HIGHLIGHT COLOR WHEEL BLUE

HIGHLIGHT COLOR WHEEL GREEN

SHADOWS COLOR WHEEL RED

SHADOWS COLOR WHEEL BLUE

SHADOWS COLOR WHEEL GREEN

MIDTONES COLOR WHEEL RED

MIDTONES COLOR WHEEL BLUE

MIDTONES COLOR WHEEL GREEN

CONTROL IN LD+ COMMAND IN LOUPEDECK+ DESCRIPTION OF THE FUNCTION

FN + CONTRAST

FN + CLARITY

FN + EXPOSURE

FN + CUSTOM MODE (SECOND LAYER)

PRESSING FN AND ROTATING CONTRAST WILL CONTROL MASTER COLOR WHEEL BY INCREASING OR DECREASING RED COLOR

PRESSING FN AND ROTATING CONTRAST WILL CONTROL MASTER COLOR WHEEL BY INCREASING OR DECREASING BLUE COLOR

PRESSING FN AND ROTATING CONTRAST WILL CONTROL MASTER COLOR WHEEL BY INCREASING OR DECREASING BLUE COLOR

MASTER COLOR WHEEL RED

MASTER COLOR WHEEL BLUE

MASTER COLOR WHEEL GREEN

THIRD PARTY TRADEMARKS AND ITEMS

Apple Final Cut Pro X is Copyright © 2019 Apple Inc. All rights reserved.

Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.

Copyright (c) 2019 Loupedeck Ltd. All rights reserved.

Visit our website for further support and information at www.loupedeck.com.

QUESTIONS?

Encountered something unexpected? Here are a few helpful hints.

I'm not able to do any color and exposure adjustments?You have to select "Color Wheels" as a standard color correction tool.Final Cut Pro -> Preferences -> General -> Color Correction -> Color Wheels

Some functions are missing? You have to restart Final Cut Pro once after installing Loupedeck software. Also if you're not using English keyboard layout, go through "How to Set up your Loupedeck+ with Apple Final Cut Pro X" on page 2.

You can find FAQs and support at www.loupedeck.com/support

LOUPEDECK CUSTOM LAYOUT FORM

WWW.LOUPEDECK.COM