USED QUALITY Used Equipment MACHINERY FOR SALE · 28 April 2009 CanTech International USED QUALITY MACHINERY FOR SALE COMPLETE LINES • 2 Piece Alu. can line for beverage 211/206

April 2009 CanTech International 28

USED QUALITYMACHINERY FOR SALE

COMPLETE LINES

• 2 Piece Alu. can line for beverage 211/206

• Pail Drum Line 20 Ltr. Sargiani 1995

• 4/5 Ltr. Rectangular auto.cans line +ends line

• Aerosol Can making lines

• Sacmi Crown Cap line PVC FREE

• 3 Piece auto can line+tooling 211,300.307,401

PRINTING & COATING MACHINES/LINES

• Crabtree & Mailander 1or 2 color presses

• Crabtree Marquess 2 col Print+UV oven + 45”x38”

• Crabtree 1290-2 color+F1 coater+LTG oven

• Mailander 122/A-2 color(1995)+LTG oven 45”x38”

• 5 Color printing+coating line+ltg oven of 2000

WELDING MACHINES

• Soudronic NRZD 12 semi auto revised

• Soudronic FBB 5501 auto.welder+Frei oven

• Soudronic VAA K-100 auto.welder

• Smag auto welder for general line

• Ears welding machines auto & semi auto

• Soudronic VEAW-K50 auto. welder

GENERAL INDIVIDUALMACHINERY

• Coil Car & Upender v/good condition

• Angelus Seamers 60L–6 heads+120L

• KlingHammer STAV-Flanger/Seamer tools dia.153mm

• FMC-652 C1 Seamer 6 heads,tools 99mm

• FMI 8 head beader 99 mm dia

• Frei Body Forming machine 4/5Ltr rectangular cans

• SHIN-I Auto single slitters 42”+Waxing spray,1994

• Lubeca auto. one head seamer LW211

• MB 548 Beader tools 603 (153mm)

• MB 560 Beader tools 83mm

• Cevolani BQ48 auto Die flanger dia 127+153 mm

• MB 151 auto Die flanger, tools 99mm dia

• MB 200 F6 auto flanger, tools 65/99mm dia

• MB 334 CRS/F auto.seamer dia.52mm

• MB 65 Spin Flanger tools 211

• Cevolani AQ 58 auto Rectangular 2 Seamers

• Bliss 821 Dbl.Die stripfeed press+dbl.curler,

• Pail Auto. Expander – 292/285

• MGR auto.Single head Seamer dia 285mm

USED QUALITYMACHINERY FOR SALE

Y P INTERNATIONAL LTD.1 Basing Hill, London, NW11 8TE.

Tel: +44 (0)20 8458 0126Fax: +44 (0)20 8209 0591

Email: [email protected]

Used Equipment

14,000 square metres, containing machines and a

workshop for machine repair and overhauling.

MEL is another second-hand equipment company

based in Spain. Founded in 1995, the company has a

15,000 square metre warehouse, in which two indoor

stores have been constructed. The company tests all

machines in its workshops before sending them onto

the customer. In addition to individual machines for

can making lines, the company also can provide

complete two- and three-piece lines for installation.

Meanwhile, Can Making Solutions (CMS) of Linares,

Spain has developed a partnership with Talleres

Clementes, another Spanish firm, for rebuilding can

making machines. Over €2 million has been invested

in new tooling machines and in expansion of the

workshop, according to the company. High-level

rebuilt filling and seaming groups can now be manu-

factured by CMS, as well as producing tooling for the

machines.

YP International, based in the UK, supplies can

making equipment ranging from complete lines to

welding machines to printing and

coating lines. The firm also has a

selection of individual machines

such as welders, seamers, slitters

and beaders. Labeling and shrink

sleeve machines are also avail-

able from the company.

North America

US-based Container Fabrication

Machinery (CFM) has a facility in

Stockton, California, offering an

indoor showroom with array of can

making equipment from equip-

ment suppliers – two- and three-

piece can making, end making

lines for both steel and aluminium

including conversion presses, single and multi-lane

outputs. Also in stock are coil shearing lines, print-

ing and coating presses, machine shop and quality

control inspection systems. The 10-year-old firm also

currently offers a selection of new Soudronic welder

and Angelus seamer parts for sale.

Other CFM services include: asset management pro-

grammes; asset recovery programmes; plant liquida-

tion services; plant auction services; certified equip-

ment appraisals; and complete rebuilding facilities.

Brodie System of the US is a service provider as well

as a parts supplier, according to John Farrell, opera-

tions manager at Brodie. “We provide complete press

and coater rebuilds, as well as cylinder, roll and other

press component reconditioning in the two- and

three-piece can markets. We have seen continuous

demand for press ready exchange cylinders for the

Hoe press. We have increased our stock of exchange

cylinders in the 36”, 38-1/2” and 45” press widths to

accommodate customers. We have also increased

our stock in D&I blanket cylinder shafts to offer

expedited cylinder repairs in the two-piece market

as well.

“These improvements allow our customers to

rebuild their equipment with minimal downtime”, he

points out.

Farrell notes that the company has also been

collecting metal for reconditioning, in order to keep

prices stable for its customers: “We have invested in

maintaining an inventory of stainless steel and cop-

per required in the reconditioning process to insure no

interruption of our services and to stabilise prices due

to the constant changing market conditions.”

He concludes, “Whether we are reconditioning

copper rolls, printing cylinders, bearing housings, full

press rebuilds or small parts repairs, the pressure to

control costs without compromising quality endures.”

Meanwhile, AMJ Industries of the US has expanded

into Latin America with the opening last year of an

office in São Paolo, Brazil. The company supplies both

two- and three-piece machines and complete lines,

ranging from clean and respray projects to labour

intensive rebuild operations. Also available are mono-

bloc aluminium and collapsible tube machines.

Recent projects for AMJ include a rebuilt uncoiler

for a Chinese can maker, as well as rebuilding six

sheet lines for a US corporation. The firm also offers

technological upgrades on machines.

Lastly, US-based OKL Can Line offers a range of

new and refurbished parts assemblies for bodymak-

ers. The firm’s service department has an extensive

background in both Ragsdale and Standun machines

acquired through years of working in production

environments in can manufacturing plants around

the world. “This has given us a thorough working

knowledge of all the equipment in the D&I areas,”

according to the company. ❑

For further information, please visit:

www.cazander.com; www.memholland.nl;

www.maquinarialacueva.com; www.mel.es;

www.canmaking.net; www.canmakingsolutions.com;

www.ypinternational.co.uk; www.brodiesystem.com;

www.amjindustries.com; www.oklcan.com

Courtesy of Brodie System

P.27,28 USED EQUIPMENT***.indd 28 22/4/09 10:46:47

CanTech International April 2009 29

P.29-LaCueva,Rushserve.indd 29 21/4/09 09:17:55

April 2009 CanTech International

Cannex Preview

30

The Cannex exhibition in Guangzhou, China promises to show can makers what’s new for the still-growing Asian market

In a year that will undoubtedly be dominated by ongoing

economic concerns, Cannex Asia Pacific will be visiting

China, a country with a metal packaging sector that is

still experiencing growth. Metal cans represent a vital part

of the packaging mix for food and beverage companies,

personal care product manufacturers, industrial container

users and fancy can producers. The following is a selection

of the companies that will be exhibiting.

Going to Guangzhou

CTI Inks, stand 134US-based CTI Inks will be introducing three-piece thermochromic ink as well as thermochromic ink for aluminum bottles.

This adds to the company’s current offering of two-piece thermochromic inks for both aluminium and steel cans. The company will be displaying samples for all types. For further information, please visit www.ctiinks.com

KBA-Metalprint, stand 113In 2008 KBA-Metalprint developed a number of improve-ments which are aiding the performances of its printing machines. For the Metalstar 2 and Mailänder 222, a new ink duct with a nano-based material is available, thus reducing the time required for ink cleaning by half.

For the Sprint, the feeder 790 has been equipped with an automatic positioning control of the sucking head to maintain stable sheet separation. For special scroll designs a new aerodynamic lifting device ensures sheet flow on the infeed table without stoppages. Furthermore, new sheet guiding elements in front of the

impression cylinder of the Sprint ensures an improved material flow. All new features for the Sprint are availa-ble as an upgrade. On the LTG ovens, a new intelligent management of the air flow reduces gas consumption on LTG Drying ovens with incinerator significantly. It is achieved by a reduction of the exhaust air as well as the temperature in the burning chamber of the incin-erator during stand-by and changeover. The new air flow management provides a reduction of 10-15% in gas consumption, depending on the job structure.

For the LTG 470 and Mailänder 460 coating machines, KBA-MetalPrint has developed a new scraper system, enabling the customer to change the blade in less than a minute. The scraper is now independent and replace-ment is carried out by help of a special security guard. The new design also allows the blade to run with less pressure, which results in longer life time for both blade and bottom roller.

KBA-MetalPrint offers the successor model of the Mailänder 122A – the new generation Mailänder 222 printing machine. It is the ideal printing machine for small to medium sized can makers and customers who need flexibility and are printing on a wide range of materials. The Mailänder 222 is unique because of the gear system situated outside of the frame, which is a characteristic of high-end printing machines. It ensures a precise and long life time for gears and eliminates the danger of printing area spoilage.

The Mailänder 222 offers speeds up to 7,000 sheets per hour and a maximum printable sheet size up to 1200mm x 970mm. For further information please visit www.kba-metalprint.de

Applied Vision, stand 501Applied Vision Corporation of the US will be show-casing its new defect classification technology as well as the latest developments in KromaKing col-our inspection. The stand will also feature: Genius vision systems (inside can, converted end, food end, easy-open end, two- and three-piece can, shell, crown, cap and closure inspection) and VTRAC intelligent machine software.

“Our participation reinforces our commitment to provide the highest level of accessibility and support to every region we serve,” says Amir Novini, president and CEO of Applied Vision. For further information please visit www.appliedvision.com

Intralox, stand 211Representatives from Intralox will present solutions for metal can handling at Cannex. As of 1 April 2009, can manufacturers in China have access not only to Intralox’s service packages, but also to guaranteed expedited shipping. Every customer receives a solution that is cus-tomised to its specific requirements, backed by a written money-back guarantee for belt performance, and the following benefits:• Container team members dedicated to working direct-ly with customers on each continent Intralox serves • Corporate offices and assembly facilities worldwide, including in Shanghai, China and Tokyo, Japan• Customer service available 24/7• Over 25 years of experience applying conveyance best practices in the container industryFor further information, visit www.intralox.com

CTI’s range of thermochromic inks will be on display for two and three-piece cans

P.30,31 CANNEX***.indd 30 21/4/09 16:45:52

CanTech International April 2009

Cannex Preview

31

Mall+Herlan, stand 459Mall+Herlan of Germany sup-plies complete lines for the pro-duction of monobloc packag-ings made of aluminium. The company will be showing a Mall + Herlan printing machine type MHD with polytype printing unit, allowing users to decorate monobloc aluminium cans or bottles with up to nine colours, along with a DVD showing the production lines, and product samples manufactured on the machines.Mall+Herlan has also developed the newest printing unit in the industry, according to the com-pany. Thanks to the quick-change options on this print-ing machine, for example automatic roller and rubber blanket washing units, customers can reduce downtime when changing decoration by 50 per cent. With ever decreasing print run sizes, this new printing machine is claimed to increase line output by 10 per cent.For further information please visit www.mall-herlan.de

Sencon, stand 330The Sencon stand at Cannex will emphasise help-ing customers with spoilage reduction as well as showing how cost savings can be achieved through reduction in energy consumption and raw materials usage.

The company will be showcasing a mixture of established products, upgrades and extensions to its industry solutions, and new applications for some of its tried and tested technologies.

Sencon staff will be on hand to discuss the latest developments in lacquer detection, coat-ings measurement and leak testing. A wide range of coatings gauges, leak testers for both cans and ends, and oven loggers, plus a unique press protection (lac-quer detection) sensor will be on display.

For further information, please visit www.sencon.com

Sprimag, stand 424Sprimag is showing its advanced inside spray machines: HIL-34 and the bottom spray machine (to spray the outside bottom of the steel can) with features that will increase the productivity of the can manufacturing process and increase the can quality. The flexi-bility of the machine design allows for customer requests to modify the machines. For further information, please visit www.sprimag.com

Schuler, stand 477Schuler is presenting two presses at Cannex: the new DA 140 cupping press, for the production of two-part beverage cans, and the new generation of impact extrusion presses of the XS range with press forces of 150 to 1,200 tonnes – suited to the production of cans, tubes or other symmetrical bodies.

With a press force of 140 tonnes and max-imum speed of up to 350 strokes per minute, the DA 140 cupping press is designed for maximum output. Users generally oper-

ate at speeds of 250 strokes – corresponding to an output of around 3,000 cans per minute. Despite its high speed, a dynamic mass counterbalance means that the press can be mounted on dampening elements directly on the press shop floor. This enables fast integra-tion into existing manufacturing environments without major construction work.

Launched in 2006, Schuler’s XS range represents a new generation of impact extrusion presses with forces of 150 to 1,200 tonnes. A technical improvement is the modified knuckle-joint drive. In contrast to conventional presses, it boasts not three but four articulated joints and thus enables the press to reach higher stroking rates – up to 220 strokes per minute – while at the same time offering slower forming speeds. This results in a number of benefits with regard to production technology.

Schuler is also cooperating with can manufactur-ing experts TG Can on sales, die equipping and press peripherals. The company has facilities in the UK and the US.

For further information, please visit www.schuler-group.com

Micromec, stand 418Micromec is the European leader in tab die and conversion die production for metal packaging, the company says. Several studies it has carried out over the last few years has enabled the company to be in the forefront with regard to materials saving and long life of the components of its tools. The company plans and executes turnkey projects and conversion tools,

together with tab dies 0.25 mm thick and multiple lines on presses working at 500 rpm. The firm also plans and sells primary and second-ary scroll dies made of full carbide. Furthermore, it is an OEM supplier on behalf of the main worldwide EOE groups.For further information, please visit: www.micro-mec.com

Schuler impact extrusion press for aluminium can production

Sencon Hoverprobe and

coatings thickness gauge

The Sprimag spray machine HIL-34

P.30,31 CANNEX***.indd 31 21/4/09 16:45:59


Offering new and rebuiltcupping dies, shell dies and complete systems for thefood and beverage container industries as well as specialty metal forming systems and product development.

Visit us at www.standardengineeringgroup.com

3394 Miller Park Road, Suite 100Akron, Ohio 44312, USATel: +1 330 896 4700Fax: +1 330 896 4701

P.32-Roeslien, SEG.indd 30 21/4/09 09:25:06


For further information, please visit

www.adinaworld.com

New Products

Coca-Cola says it has refor-mulated its Emerald Mountain Blend Café Au Lait drink sold in the Japanese market in order to contain more quality cof-fee aroma and an enhanced refreshing aftertaste. This is achieved by using coffee beans processed via a high-tempera-ture roasting technique. The soft drinks giant notes that this prod-uct is the only one to feature the rare Emerald Mountain coffee beans. The packaging design has also been revised.

A new Emerald Mountain Blend

The US-based speciality drinks firm Adina for Life has launched its energy drink range of bever-ages based on coffee and milk. These include Vanilla Nut Case, Hazelnut Hook Up, Double Xxpresso and Mocha Madness. The drinks use Fair Trade organic Colombian cof-fee and are said to be devoid of preservat ives , artificial flavours and colours. The energy comes from the cof-fee’s caffeine and via added guarana.

The madness of Adina

Kronenbourg sparkles in CrownBrasseries Kronenbourg, a French brewery and part of the Carlsberg Group, is launch-ing a new fresh look for its Kronenbourg and 7.2 flagship beer cans using high qual-ity print technology from Crown Bevcan Europe & Middle East. The switch to high quality print is part of Kronenbourg’s plans to revamp its brand with a more innovative and visually appeal-ing package.

For the launch, Crown is supplying 33cl and 50cl print-ed cans, which include two revamped can designs devel-oped for the Kronenbourg and 7.2 brands. The new beer cans feature a higher definition golden Kronenbourg logo with sharp vivid images and defined shapes against a red or purple background. Images of water droplets around the logo are brought to life with high quality print. High quality print technol-ogy is designed to reproduce

and enhance detailed images such as faces, fruit and fine text on beverage cans. “This is very exciting for us, as it is the first time that Crown is providing high quality print technology on such a large scale,” says Caroline Archer-Reed, marketing direc-tor, Crown Bevcan Europe & Middle East.


www.coca-cola.com

Rexam does the ‘CanCan’Rexam has been chosen by Guy Anderson Wines to help bring its new wine brand ‘CanCan’ to the market, using 250ml alu-minium cans. The brand, to be official-ly launched at this year’s International Wine Fair in London, will initially introduce a Sauvignon Blanc from the South West of France to be fol-lowed up by a rosé Pinot Grigio and a sparkling Prosecco, both from Italy. Rexam first began helping to develop the wine in cans market back in 2006. Irene Martinez, category develop-ment manager at Rexam says “We are constantly keeping our eye on not only what brands are doing in the market and what packaging choices they are making but, just as importantly, what con-sumers are choosing and how their lifestyles are changing. We are seeing a gradual increase in

the number of off-trade drinking occasions. Consumers are mak-ing the choice to consume at home or on-the-go and pack-

aging wine in cans targets these occa-sions perfectly with its convenient, single serve and environ-mental benefits.”

CanCan is a pre-mium quality wine, created by leading French winemaker Thierry Boudinaud. It offers a great wine drinking experience and a smart, distinc-tive design along with the benefits of the can. 2009 looks set for further developments and success in the wine in cans market. The can is single serve and ideal for on-the-

go consumption, easy to store, recyclable and offering 360º branding.

For further information please visit

www.rexam.com


www.kronenbourg.com or

www.crowncork.com

P.33 NEW PRODS*.indd 37 21/4/09 16:47:10

2216 E. Miner Avenue,Stockton, CA 95205 USAT +1 (209) 4697384F +1 (209) [email protected]

World’s Largest Supplier of Quality Used Can Making Equipment

PAINT AND F STYLE CAN, SCROLL, CCCCCCOOOOOOAAAAAATTTTTTIIIIIINNNNNNGGGGGG,, CCCCCCOOOOOOIIIIIILLLLLL SSSSSSHHHHHHEEEEEEAAAAAARRRRRRIIIIIINNNNNNGGGGGG LLLLLLIIIIIINNNNNNEEEEEESSSSSS

RELEASED FOR SALE STILL INSTALLED AAAAAAAVVVVVVVAAAAAAAIIIIIIILLLLLLLAAAAAAABBBBBBBLLLLLLLEEEEEEE FFFFFFFOOOOOOOORRRRRRR IIIIIIIMMMMMMMMMMMMMMEEEEEEEDDDDDDDIIIIIIIAAAAAAATTTTTTTEEEEEEE DDDDDDDEEEEEEELLLLLLLIIIIIIIVVVVVVVEEEEEEERRRRRRRYYYYYYY

w w w. c a n m a k i n g . n e t

CONTINENTAL CAN CO DIE NECKERS MODEL 628BNM FULLY AUTOMATIC

SIX STATION, SEVERAL UNITS AVAILABLE WITH THE FOLLOWING CONFIGURATIONS 205 BODY PRENECK TO 203/204 TOP AND BOTTOM 205 BODY, 201 DIA TOP 204 DIA BOTTOM. FINAL DIE NECKING OPERATION OF A 202 DIAMETER CAN. 211 DIA BODY, 207.5 DIA TOPS, 210 DIA BOTTOMS. (3 UNITS AVAILABLE), 211 DIA BODY, 1ST OP PRE NECK FOR 210 DIA BOTTOM AND 207.5 DIA TOP, 202 DIA BODY, 201 DIA TOP AND 200 DIA BOTTOMS (2 UNITS AVAILABLE).

CONTINENTAL CAN CO SPIN FLANGER MODEL 626SF-1 FULLY AUTOMATIC

SIX STATION DUAL SIDED, SEVERAL UNITS AVAILABLE WITH THE FOLLOWING CONFIGURATIONS 211 DIA BODY, 207.5 TOPS AND 210 BOTTOMS. 202 DIA BODY, 201 TOPS AND 200 BOTTOMS (3 UNITS AVAILABLE) 205 DIA BODY, 202 TOPS AND 204 BOTTOMS. 202 DIAMETER NECKED IN CAN.

BORDEN 48 POCKET HIGH PRESSURE FULLY AUTOMATIC AEROSOL CANS

AIR TESTER MODEL 3-C-HP, , SET UP FOR 205 DIAMETER NECK END CANS, UNIT FEATURES HEAVY DUTY TIMING SCREW TO STAR INFEED DUAL WHEEL DISCHARGE, HYDE PARK MD20 UPGRADE, ALLEN BRADLEY PLC CONTROL UPGRADE, REBUILT AND UPGRADED IN 2005 VERY GOOD CONDITION.

BORDEN 36 POCKET HIGH PRESSURE FULLY AUTOMATIC AIR TESTER. UNIT

DESIGNED FOR 202 DIAMETER AEROSOL CANS, UNIT HAS 9 INCH STROKE, SPOOL VALVE NO CAN NO AIR, SPOOL VALVE TEST AIR, HYDE PARK MODEL MD2, MODEL MC128 AND DUAL PS10’S.


DESIGNED FOR 211 DIAMETER AEROSOL CANS. UNIT FEATURES TIMING SCREW TO STAR INFEED, SPOOL VALVE NO CAN NO AIR, SPOOL VALVE TEST AIR, DUAL WHEEL DISCHARGE, HYDE PARK MD20 UPGRADE, ALLEN BRADLEY PLC CONTROL UPGRADE.

BORDEN 24 POCKET TESTER, SET UP FOR 610 DIAMETER PAINT CANS.

UNIT FEATURES ELECTRIC CAN STOP, 8 INCH STROKE, NO CAN NO AIR SPOOL VALVE, SPOOL VALVE TEST AIR, DUAL WHEEL DISCHARGE, HYDE PARK MODEL MD2 MEMORY DISPLAY MODEL MC128 SINGLE PS10, MOUNTED OPERATOR CONTROLS AND POWER PANEL.

CONTINENTAL ST-4 SLITTER, 1ST OP HAS 6 SETS OF CARBIDE KNIVES,

2ND OP HAS 5 SETS OF CARBIDE KNIVES, BORDEN SHEET FEEDER, MAXIMUM SHEET SIZE 37X44 INCHES, WITH 6 FOOT LONG POWERED ROLLER CONVEYOR.

BLISS 5325 DUPLEX SLITTER, 1ST OP HAS 3 SETS OF CARBIDE KNIVES,

2ND OP HAS 5 SETS OF CARBIDE KNIVES. DEXTER FEEDER MODEL 6MTF, MAXIMUM SHEET SIZE 44X44, 4 FOOT LONG POWERED ROLLER CONVEYOR.

CONTINENTAL MODEL 361ST5, 1ST OP HAS 49 INCHES BETWEEN BEARING

BLOCKS, FITTED WITH HYDRAULIC HUBS AND CARBIDE CUTTERS, 6 SETS ON 1ST OP AND 8 SETS ON 2ND OP, 40 INCHES BETWEEN BEARING BLOCKS, INCLUDES DEXTER SHEET FEEDER MAXIMUM SHEET SIZE 36X44AND BODY BLANK STACKING TABLE.

BLISS MODEL 1225A SINGLE OPERATION SLITTER, 1ST OPERATION

TABLE HAND FEED, 40-1/2 INCHES BETWEEN BEARING BLOCKS WITH 9 SETS

OF TOOLED KNIVES.

CANCO DUPLEX SLITTER WITH DEXTER SHEET FEEDER, 1ST OPERATION

HAS 6 SETS OF CARBIDE KNIVES, 2ND OPERATION TABLE 8 SETS OF CARBIDE KNIVES, DEXTER SHEET FEEDER MODEL 6TF, MAXIMUM SHEET SIZE 36X36.

ANGELUS 41P AND 43P SEAMERS, SET UP FOR 211 DIAMETER AEROSOL

DOME BOTTOMS AND CONE TOPS.

ANGELUS MODEL 50P DF SEAMERS, SET UP TO SEAM 610 DIAMETER

PAINT CAN RINGS AND BOTTOMS, (2 UNITS AVAILABLE ONE FOR EACH OPERATION)

LANICO RAPID SINGLE HEAD MANUAL SEAMER, FEATURES 4 ROLL SINGLE

HEAD SEAMING STATION WITH FOOD PEDAL OPERATED LIFTER, SET UP ON 202 DIAMETER.AMECO BART 2 AUTOMATIC BODY BLANKS TRANSPORT SYSTEM,

FAEL HSW-P-EAR22-360 FULLY AUTOMATIC WELDER, SET UP TO ACCEPT

ROLL FORMED BODY BLANKS WITH EARS ATTACHED, TOOLED 610 DIAMETER. KATO BRUSHLESS FREQUENCY CONVERTER, OVERHEAD MAGNETIC DISCHARGE CONVEYOR. SET UP FOR LIQUID INSIDE SPRAY. (2 UNITS AVAILABLE)

FEDERAL 717FCM-2 EAR CLINCHER UNIT IS AUTOMATICALLY FED BODY

BLANKS FROM BART SYSTEM TRANSPORTED DOWN, HAS EARS CLINCHED ONTO BODY BLANKS.

CROWN MODEL 301 BEADER, TOOLED 610 DIA BY 708 HIGH. UNIT FEATURES

8 STATION BEADING TURRET WITH 2 UP, 2 DOWN BEAD PATTERNS.

BLH MODEL 302 DIE FLANGER, TOOLED 610 DIAMETER BY 708 HIGH.

UNIT FEATURES 4 STATION DIE FLANGING TURRET TO GRAVITY DISCHARGE.

FLYNN MODEL AF9 CURING OVEN, 9 METERS, SET UP WITH DUAL BANDS AT

4 INCHES APART ON CENTER.

BLISS 1103 SCROLL SHEAR TOOLED 610 DIAMETER, DIE BED CUT OUT,

DEXTER SHEET FEEDER MODEL TF MAXIMUM SHEET SIZE 38X38, 4 FOOT LONG POWERED ROLLER CONVEYOR. (2 UNITS AVAILABLE)

BLISS 1831 STRIP FED PRESS, SINGLE DIE, TOOLED FOR 610 DIAMETER, (2

UNITS AVAILABLE)

BLISS C 35 TON COMPONENT FED END PRESS, SLIDE ADJUSTMENT 2-

1/2 INCHES, STROKE 5 INCHES, TOOLED FOR 610 DIAMETER, SINGLE GREGORY KICKER, GRAVITY DISCHARGE (3 UNITS AVAILABLE).

CAMERON 314 STRIP FED PRESSES (5 UNITS AVAILABLE TOOLED FOR

200 AND 202 AEROSOL BOTTOMS, 211 AEROSOL TOPS).

BLISS MODEL 102S TRANSFER PRESS, FEATURES ROTARY DISK INFEED TO

RECIPROCATING FEED BAR, 5 OPERATION STATIONS, SET UP FOR 211 DIAMETER AEROSOL TOPS, DISCHARGE THROUGH 4 INCH WIDE FLAT BELT DISCHARGE.

CONTINENTAL CAN CO. 5CD LINERS, WITH THE FOLLOWING

CONFIGURATIONS 200DIAMETER AEROSOL DOME BOTTOMS. 211 DIAMETER AEROSOL BOTTOMS 211 DIAMETER AEROSOL TOPS

GRACE MODELS 19 and 24W SINGLE LANE LINERS, FITTED WITH

MECHANICAL GUN, PNEUMATIC END STOP, SET UP FOR WATER BASE COMPOUNDS.

GRACE MODEL HCE SINGLE LANE LINER WITH ELECTRIC GUN, UNIT

DISCHARGES DIRECTLY TO A SINGLE LANE PACKING STATION WITH A MAGNETIC WHEEL UPSTACKER, 3 FOOT LONG PACKING TRAY.

MOUNTAINGATE STYLE SINGLE LANE END CURING OVENS 42 INCH LONG

HEAT TUNNEL, MOUNTED POWER PANEL WITH RKC TEMPERATURE CONTROLLER. WITH VARIOUS CONFIGURATIONS TO INCLUDE 211 DIA AEROSOL DOME BOTTOMS 200 DIA AEROSOL CONE TOPS 112 DIA AEROSOL CONE TOPS 211 STANDARD BOTTOMS

PAINT CAN LINE SET FOR 610X711 AND 610X709 HEIGHT CURRENTLY RUNNING

711, EAR CLINCHING LINE FOR TO INCLUDE: 1) CONTINENTAL CAN 361-ST3 DUPLEX SLITTER WITH FEEDER, 2) BART II AUTOMATIC BODY BLANK ROBOT, 3) HOPKINS EAR CLINCHER, 4) FAEL BODY MAKER MODEL HSP22-360EC, KATO FREQUENCY CONVERTER, LIQUID INSIDE SPRAY, OVERHEAD MAGNETIC DISCHARGE CONVEYOR A270 WELD MONITOR, 5) MAGNETIC SPRAY CONVEYOR, 12 FEET LONG AND MAGNETIC ACCELERATING CONVEYOR, 6) FLYNN 9 METER CURING OVEN, 7) MAGNETIC OVER-THE-HUMP ELEVATOR, 8) ONE LOT OF HONE CHAIN CONVEYING, 9) ANGELUS 50P CF DOUBLE SEAMERS SET UP FOR 610 DIAMETER PAINT CAN RINGS AND BOTTOMS.

F STYLE CAN LINE FOR ONE GALLON CANS FACTORY FINISH IS

402X610X907 RATED FOR 90 CANS PER MINUTE TO INCLUDE; 1) CONTINENTAL CAN COMPANY MODEL 361-ST2 DUPLEX SLITTER WITH DEXTER SHEET FEEDER. 2) FAEL BODYMAKER MODEL MST12-360, 3) SABATIER EXPANDER, ‘F’ STYLE ONE GALLON CANS 4) FLYNN 9 METER CURING OVEN, 5) ACCELERATING CONVEYOR, 6)MAGNETIC OVER-THE-HUMP ELEVATOR, 7) BLISS MODEL 1420 DIE FLANGER, 8)ONE LOT OF HONE CHAIN CONVEYING, 9) ANGELUS MODEL 94P-6 DOUBLE SEAMER S FOR ‘F’ STYLE BOTTOMS AND TOPS, 11) THREADER FOR TOPS OF THE ENDS, 12) CURING OVEN, TOP DOWN CURING, 13) MAGNETIC OVER-THE-HUMP ELEVATOR, 14) BORDEN MODEL 500 24 POCKET AIR TESTER, 15) FUSION INC. HANDLE APPLICATOR CAN, 16) VIDEO JET MODEL EXCEL, 17) OVEN, TOP DOWN CURING FOR SOLDERED HANDLES, 18) MAGNETIC OVER-THE-HUMP ELEVATOR.

F STYLE ONE GALLON BOTTOMS AND TOPS CALLAHAN MODEL

GSE STRIP FED PRESSES, DUAL FEED SCREW UPSTACKER, END FED TO CAMERON MODEL 176 SINGLE LANE CURLER

F STYLE HANDLES FOR THE ONE GALLON CANS. 1) SINGLE

WHEEL UNCOILER, PINCH ROLL / COIL STRAIGHTENER SYSTEM WITH 8 SETS OF LEVELLING ROLLS, 2) BLISS MODEL 20C SINGLE DIE PRESS HANDLES ARE PREFORMED AND CUT, 3) HANDLES ARE GRAVITY FED TO A MAGNETIC BELT ELEVATOR, 4) LAZY SUSAN STYLE UNCOILER.

610 DIAMETER RING LINE ; 1) CONTINENTAL CAN MODEL 9BSS

SCROLL SHEAR, DIE BED CUT OUT, CURRENTLY UNTOOLED. 2) DEXTER SHEET FEEDER MODEL TF 44X44, 4 FOOT LONG POWERED ROLLER CONVEYOR, 3) CONTINENTAL CAN MODEL 175-AP STRIP FED PRESS, 1ST OPERATION PRESS, 4) INCLINE END ELEVATOR 6 FEET TALL, 5)

COMPONENT FED 2ND OPERATION PRESS MODEL 123P1, 6) 6 FOOT TALL INCLINE END ELEVATOR, 7) COMPONENT FED CONTINENTAL CAN COMPANY MODEL EEP 3RD OPERATION PRESS, SINGLE WHEEL 270 DEGREE SEGMENT CURLER.

610 DIAMETER PLUG LINE; 1) CONTINENTAL CAN COMPANY

MODEL 9A-SS SCROLL SHEAR, DIE BED CUT OUT, 2) DEXTER SHEET FEEDER 44X44, 3) CONTINENTAL CAN STRIP FED PRESS, 1ST OPERATION, 4) INCLINE END ELEVATOR, 5) CONTINENTAL CAN COMPANY 18W COMPONENT FED PRESS, 2ND OPERATION.

EAR SLITTER LINE – FOR THE 610 DIAMETER EARS; 1) CONTINENTAL

DUPLEX SLITTER WITH SHEET FEEDER, MODEL 305-GS-1, FITTED WITH CARBIDE KNIVES, 1ST OP TWO SETS, 2ND OP HAS SINGLE CHAIN ON CENTER AND ELEVEN SETS WITH A 10 POCKET ADJUSTABLE STACKING TABLE.

610 EAR PRESS – STAMPS OUT THE EARS FOR PAINT CANS. 1) 1ST OPERATION

CONTINENTAL STRIP FED PRESS, SINGLE LANE MAGNETIC ELEVATOR, 2) 2ND PRESS – TINENT MODEL NO. 123-P, COMPONENT FED PRESS, DOUBLE DIE, 3) 3RD OPERATION PRESS BLISS DOUBLE DIE, 24 INCH FLYWHEEL, GRAVITY DISCHARGE, DUAL LANE INCLINE ELEVATOR.

HELPER LINE FOR THE EAR PRESS CONTINENTAL CAN MODEL 207PGF,

DOUBLE DIE STRIP FED PRESS, VIBRATORY SYSTEM THAT SEPARATES THE EARS INTO TWO LANES TO A COMPONENT FED BLISS PRESS.

404 DIA PLUG LINE: 1) 1ST OPERATION PRESS CAMERON MODEL 313 STRIP

FED PRESS, 2) 11 FOOT HIGH MAGNETIC END ELEVATOR, 3) 2ND OPERATION COMPONENT FED PRESS CONTINENTAL MODEL 217, 4) 3 FOOT LONG MAGNETIC BELT INCLINE ELEVATOR, BAGGING STATION WITH MAGNETIC WHEEL UPSTACKER.

404 RING LINE: 1) 1ST OPERATION CAMERON MODEL 248 STRIP FED

PRESS, 11 FOOT MAGNETIC INCLINE BELT ELEVATOR, 2) BLISS 2ND OPERATION COMPONENT FED PRESS, 3)10 FOOT TALL MAGNETIC END ELEVATOR, 4) ROCKFORD 3RD OPERATION COMPONENT FED END PRESS, MODEL NO. 3S, 5) GRACE MODEL 2U SINGLE LANE LINER UNIT HAS ELECTRONIC GUN, 6) 3 FOOT LONG MAGNETIC INCLINE ELEVATOR, SINGLE LANE BAGGING STATION WITH A MAGNETIC WHEEL UPSTACKER.

404 DIAMETER BOTTOM ENDS; 1) CONTINENTAL CAN COMPANY

COMPONENT FED END PRESS MODEL 207-PCF-1, WITH SINGLE 270 DEGREE SEGMENT CURLER, 2) 5 FOOT LONG MAGNETIC INCLINE END ELEVATOR WITH 4 INCH WIDE BELTING AND 5 INCH WIDE FACE, 3) GRACE MODEL 19W8A SINGLE LANE LINER, UNIT HAS ELECTRONIC GUN DISCHARGES INTO A SINGLE LANE PACKING STATION WITH MAGNETIC DUAL UPSTACKER AND A 6 FOOT LONG BAGGING TRAY.

BLISS 1103 SCROLL SHEAR WITH DEXTER SHEET FEEDER. PRESS HAS

SLOT IN CENTER OF DIE BED, LAST RAN 610 DIAMETER ENDS, CUT IN CENTER OF DIE BED

UNITED CAN SCROLL SHEAR, SINGLE CHAIN ON CENTER TO DUAL

RECIPROCATING FEED BARS WITH FEED FINGERS, UNTOOLED, CUTOUT IN DIE BED AREA.

COMPLETE SCROLL SHEAR LINE, 6 FOOT LONG ROLLER INFEED CONVEYOR,

BORDEN 232 SHEET FEEDER, OXYDRY SHEET WAXER, BORDEN SCROLL SHEAR, DEXTER SCROLL STRIP STACKER. (2 LINES AVAILABLE TOOLED FOR 211 DIAMETER AEROSOL BOTTOMS)

COMPLETE SCROLL SHEAR LINE, 6 FOOT LINE POWERED ROLLER

CONVEYOR, DEXTER SHEET FEEDER, OXYDRY SHEET WAXER, CONTINENTAL CAN COMPANY 9B-SS SCROLL SHEAR, DEXTER SCROLL STRIP STACKER. (3 LINES AVAILABLE ONE EACH FOR 202, 200 AND 207.5)

LITTELL MODEL LM1E COIL CUTTING LINE MFG 1985 SERIAL NUMBER 87843-

85WITH DIGITAL CUT TO LENGTH AND 4 BOX CLASSIFIER INCLUDING THE FOLLOWING: 1) COMMON FRAME MOUNTED COIL UPENDER/COIL CAR/UNCOILER, UNIT CONFIGURED TO ALLOW STAGING OF TWO COILS AND HAVE UNCOILER LOADED WITH ONE COIL CAPACITY 25000LBS, 2) LIGHT BOX OPERATOR INSPECTION STATION, 3) LITTELL LEVELER WITH INTEGRATED PRATT & WHITNEY ROLLING MICROMETER, 4) LITTELL SHEAR INCLUDES INTEGRATED SEMS UV PINHOLE DETECTOR DIGITAL CUT TO LENGTH WITH THREE POST SHEAR, 5) LITTELL FOUR BOX CLASSIFIER UNIT HAS BOTH A & B PRIME PLATE STACKING BOXES AND TWO REJECT STACKING BOXES, ONE FOR PINHOLE AND ONE FOR OVER/UNDER GAGE, 6) DIGITAL CUT TO LENGTH SYSTEM IS ORMEC, CONTROLS ARE PLC ALSO INCLUDED IS MOTORIZED DIE LIFT TABLE AND PNEUMATIC GAUGING TABLE, ROCKWELL HARDNESS TESTER.

SHEET WAXING LINES CONSISTING OF; 1) DEXTER SHEET FEEDER WITH

10 FOOT LONG ROLLER CONVEYOR, 2) OXYDRY ELECTROSTATIC SHEET WAXER, 3) DEXTER MODEL PE SHEET STACKER SERIAL NUMBER 20931, MAXIMUM SHEET SIZE 36X44 INCHES. (2 LINES AVAILABLE)

COMPLETE 2 COLOR TANDEM PRINTING LINE WITH TRAILING

VARNISH UNIT, LINE IS CONFIGURED TO RUN BETWEEN 65-75 SHEETS PER MINUTE, WITH 36x45IN PRINTERS INCLUDES A EPIC DAMPENING SYSTEMS AND GRAPHICS MICROSYSTEM INC. COMPUTERIZED INK CONTROL SYSTEM. 2 LINES AVAILABLE STILL INSTALLED AND IN OPERATION

COMPLETE 2 COLOR TANDEM UV PRINTING LINE WITH TRAILING

VARNISH UNIT, FITTED WITH INTERDECK UV CURING SYSTEM. LINE IS CONFIGURED TO RUN BETWEEN 65-75 SHEETS PER MINUTE, WITH

36x45IN PRINTERS INCLUDES A EPIC DAMPENING SYSTEMS AND GRAPHICS MICROSYSTEM INC. COMPUTERIZED INK CONTROL SYSTEM STILL INSTALLED AND IN OPERATION

SHEET COATING LINE CONSISTING OF THE FOLLOWING: 1)DEXTER SHEET

FEEDER, 2) WAGNER 15X44 INCH COATER WITH DOUBLE SCRAPERS, 3) WAGNER SIX ZONE OVEN APPROXIMATELY 180 FEET LONG INCLUDING COOLING ZONES WITH MAXON BURNERS. OVEN DISCHARGE INCLUDES A MAGNETIC SHEET STRIPPER, 4) DEXTER 9000LB SHEET STACKER WITH WAGNER INLINE BUNDLE TURNER AND A 10 FOOT POWER ROLLER DISCHARGE CONVEYOR. (TWO LINES AVAILABLE)

HIGH SPEED SHEET COATING LINE CONSISTING OF; 1) DEXTER MODEL TF

9000LB SHEET FEEDER, MAXIMUM SHEET SIZE 44X44, 2) WAGNER 15 INCH SHEET COATER WITH DUAL SCRAPERS AND PNEUMATIC COATING FEED SYSTEM WITH DUAL NORDSON HEATERS. WET SHEET BLANK FEED TABLE, 3) YOUNG BROTHERS WICKET OVEN NATURAL GAS FIRED WITH FOUR HEATING ZONES AND COOLING ZONE OVERALL LENGTH IS 180 FEET WITH MANY UPGRADES INCLUDING HONEYWELL DIGITAL CIRCLE CHART RECORDER/TEMPERATURE RECORDER, ELECTRICAL CONTROLS FEATURE UPGRADE TO PLC, WITH GRAPHIC INTERFACE SCREEN, BELT DRIVEN SHEET STRIPPER, 4) DEXTER 9000LB FULLY AUTOMATIC SHEET STACKER 44X44 SHEET CAPACITY, 5) LUTHI BUNDLE TURNER MODEL BT-10R, 10 FOOT LONG POWERED ROLLER CONVEYOR.

HIGH SPEED SHEET COATING LINE CONSISTING OF;

1) DEXTER FULLY SHEET FEEDER MODEL 6MTF MAXIMUM SHEET SIZE 36X44 INCHES 2) WAGNER 15 INCH SPOT COATER WITH DUAL SCRAPERS, ANILOX METERING SYSTEM, WET SHEET OVEN INFEED CONVEYOR TABLE, 3) WAGNER 6 ZONE WICKET OVEN APPROXIMATELY 180 FEET LONG INCLUDING COOLING SECTION 6 HEATING ZONES, HONEYWELL DIGITAL CIRCLE CHART CONTROLLERS WITH ALLEN BRADLEY SLICK 504 ELECTRICAL CONTROLS AND ALLEN BRADLEY AC INVERTER DRIVES. OVEN DISCHARGE BELT DRIVEN SHEET STRIPPER, 4) WAGNER MODEL 6MBD AUTOMATIC SHEET STACKER MAXIMUM SHEET SIZE 36X44, 5) LUTHI INLINE BUNDLE TURNER 10 FOOT LONG POWER ROLLER CONVEYOR

VARIOUS MISCELLANEOUS EQUIPMENT ALSO AVAILABLE TO

INCLUDE VIDEO JET EXCEL 170i INK JET PRINTERS. (2 UNITS AVAILABLE) COATING ROLL GRINDING SYSTEM. WAGNER IN LINE BUNDLE TURNER, LANTECH SINGLE HIGH OFF LINE WRAPPER, WAGNER 15 INCH COATER, NIPPON WATER CHILLER, MAGNETIC ACCELERATOR CONVEYOR AND ELEVATORS, 300 FEET OF MILD STEEL CABLE TRACK, INCLINED MAGNETIC ELEVATOR,SINGLE LANE PACKING STATION, AUTOMATIC MAGNETIC BODY BLANK FEEDER.

PVATO

NENT F217, 4)NCLIN

)

WR.

L) 11OR, )

ED PRE3 FOOT

EL

A 1) 1SMODEL

)

T HIGH M2ND OSS

NRS

T FED B

OPERATIO313 STMAG

TGF,

ATORY INTO

SSLONF

ILS E COIL C

OPERAITT

IMOR/CORED

HAVAPAQL CUT

NCLUDINFRAME

IL CAR/UTO ALLOW

U

U1E CO

ERIAL NUMTO LENGT

G THE FMOU

IH

L CUBERANDD

KER. (FOR 202,

(

UTTING8784

AL S

COPNEUDUALBLAW

TH

CONS000LB ZE 44X

ER MATIA

0IZ

UL

ISPEISTIHEET4, 2)

ITOWER

TWO LINED SHEENG OF; 1

FEED

NHE

HEET STAUNDLE TU

ROLLER DES AVAILA

T C

ACH

VE, SEEL DIS

MEMORGLE PS1TRO

NOC

DIATURES EROKE, NO OOL VALVCHARGE,

Y

OONTR

KET TESTMETER PALECTRIC

CAN NOT

CADUAL W

D20 UPOL UPG

R, SET CH

L W TO

AN NO WHEEL

ADEDE. U

F4 IEB H

TOOUNIT FETURRET

FLYNN MMETEN

RAD PAT

MODELLED 610 DATURES 4 S

O GRAVO

E1 BEA

HIGH. U TURRETNS.2 DIEET

XNTO

DER, TOOFEATUR

WITH 2 UCODY

RTED BO

OLED

ALM8) 9) ANGE)

UP FOR 6)

AND BOT

FU

NVETIC AC

LYNN 9 METIC OVE

LOT OF LUS 50P10

SCH

MONITOYOR, 12 CCELERAT

ETER CR-THE-I

PRAARGE

R, FEEING RIV

)P22

)

CONVAY, OVE

CON) MAG

LONE, 3)FAEL , )

360EC, ERTER,

HEAD EYOR

2216 E. Miner Avenue,Stockton, CA 95205 USAT +1 (209) 4697384F +1 (209) [email protected]

World’s Largest Supplier of Quality Used Can Making Equipment

PAINT AND F STYLE CAN, SCROLL, CCCCCCOOOOOOAAAAAATTTTTTIIIIIINNNNNNGGGGGG,, CCCCCCOOOOOOIIIIIILLLLLL SSSSSSHHHHHHEEEEEEAAAAAARRRRRRIIIIIINNNNNNGGGGGG LLLLLLIIIIIINNNNNNEEEEEESSSSSS

RELEASED FOR SALE STILL INSTALLED AAAAAAAVVVVVVVAAAAAAAIIIIIIILLLLLLLAAAAAAABBBBBBBLLLLLLLEEEEEEE FFFFFFFOOOOOOOORRRRRRR IIIIIIIMMMMMMMMMMMMMMEEEEEEEDDDDDDDIIIIIIIAAAAAAATTTTTTTEEEEEEE DDDDDDDEEEEEEELLLLLLLIIIIIIIVVVVVVVEEEEEEERRRRRRRYYYYYYY

w w w. c a n m a k i n g . n e t

CONTINENTAL CAN CO DIE NECKERS MODEL 628BNM FULLY AUTOMATIC

SIX STATION, SEVERAL UNITS AVAILABLE WITH THE FOLLOWING CONFIGURATIONS 205 BODY PRENECK TO 203/204 TOP AND BOTTOM 205 BODY, 201 DIA TOP 204 DIA BOTTOM. FINAL DIE NECKING OPERATION OF A 202 DIAMETER CAN. 211 DIA BODY, 207.5 DIA TOPS, 210 DIA BOTTOMS. (3 UNITS AVAILABLE), 211 DIA BODY, 1ST OP PRE NECK FOR 210 DIA BOTTOM AND 207.5 DIA TOP, 202 DIA BODY, 201 DIA TOP AND 200 DIA BOTTOMS (2 UNITS AVAILABLE).

CONTINENTAL CAN CO SPIN FLANGER MODEL 626SF-1 FULLY AUTOMATIC

SIX STATION DUAL SIDED, SEVERAL UNITS AVAILABLE WITH THE FOLLOWING CONFIGURATIONS 211 DIA BODY, 207.5 TOPS AND 210 BOTTOMS. 202 DIA BODY, 201 TOPS AND 200 BOTTOMS (3 UNITS AVAILABLE) 205 DIA BODY, 202 TOPS AND 204 BOTTOMS. 202 DIAMETER NECKED IN CAN.

BORDEN 48 POCKET HIGH PRESSURE FULLY AUTOMATIC AEROSOL CANS

AIR TESTER MODEL 3-C-HP, , SET UP FOR 205 DIAMETER NECK END CANS, UNIT FEATURES HEAVY DUTY TIMING SCREW TO STAR INFEED DUAL WHEEL DISCHARGE, HYDE PARK MD20 UPGRADE, ALLEN BRADLEY PLC CONTROL UPGRADE, REBUILT AND UPGRADED IN 2005 VERY GOOD CONDITION.


DESIGNED FOR 202 DIAMETER AEROSOL CANS, UNIT HAS 9 INCH STROKE, SPOOL VALVE NO CAN NO AIR, SPOOL VALVE TEST AIR, HYDE PARK MODEL MD2, MODEL MC128 AND DUAL PS10’S.


DESIGNED FOR 211 DIAMETER AEROSOL CANS. UNIT FEATURES TIMING SCREW TO STAR INFEED, SPOOL VALVE NO CAN NO AIR, SPOOL VALVE TEST AIR, DUAL WHEEL DISCHARGE, HYDE PARK MD20 UPGRADE, ALLEN BRADLEY PLC CONTROL UPGRADE.

BORDEN 24 POCKET TESTER, SET UP FOR 610 DIAMETER PAINT CANS.

UNIT FEATURES ELECTRIC CAN STOP, 8 INCH STROKE, NO CAN NO AIR SPOOL VALVE, SPOOL VALVE TEST AIR, DUAL WHEEL DISCHARGE, HYDE PARK MODEL MD2 MEMORY DISPLAY MODEL MC128 SINGLE PS10, MOUNTED OPERATOR CONTROLS AND POWER PANEL.

CONTINENTAL ST-4 SLITTER, 1ST OP HAS 6 SETS OF CARBIDE KNIVES,

2ND OP HAS 5 SETS OF CARBIDE KNIVES, BORDEN SHEET FEEDER, MAXIMUM SHEET SIZE 37X44 INCHES, WITH 6 FOOT LONG POWERED ROLLER CONVEYOR.

BLISS 5325 DUPLEX SLITTER, 1ST OP HAS 3 SETS OF CARBIDE KNIVES,

2ND OP HAS 5 SETS OF CARBIDE KNIVES. DEXTER FEEDER MODEL 6MTF, MAXIMUM SHEET SIZE 44X44, 4 FOOT LONG POWERED ROLLER CONVEYOR.

CONTINENTAL MODEL 361ST5, 1ST OP HAS 49 INCHES BETWEEN BEARING

BLOCKS, FITTED WITH HYDRAULIC HUBS AND CARBIDE CUTTERS, 6 SETS ON 1ST OP AND 8 SETS ON 2ND OP, 40 INCHES BETWEEN BEARING BLOCKS, INCLUDES DEXTER SHEET FEEDER MAXIMUM SHEET SIZE 36X44AND BODY BLANK STACKING TABLE.

BLISS MODEL 1225A SINGLE OPERATION SLITTER, 1ST OPERATION

TABLE HAND FEED, 40-1/2 INCHES BETWEEN BEARING BLOCKS WITH 9 SETS

OF TOOLED KNIVES.

CANCO DUPLEX SLITTER WITH DEXTER SHEET FEEDER, 1ST OPERATION

HAS 6 SETS OF CARBIDE KNIVES, 2ND OPERATION TABLE 8 SETS OF CARBIDE KNIVES, DEXTER SHEET FEEDER MODEL 6TF, MAXIMUM SHEET SIZE 36X36.

ANGELUS 41P AND 43P SEAMERS, SET UP FOR 211 DIAMETER AEROSOL

DOME BOTTOMS AND CONE TOPS.

ANGELUS MODEL 50P DF SEAMERS, SET UP TO SEAM 610 DIAMETER

PAINT CAN RINGS AND BOTTOMS, (2 UNITS AVAILABLE ONE FOR EACH OPERATION)

LANICO RAPID SINGLE HEAD MANUAL SEAMER, FEATURES 4 ROLL SINGLE

HEAD SEAMING STATION WITH FOOD PEDAL OPERATED LIFTER, SET UP ON 202 DIAMETER.AMECO BART 2 AUTOMATIC BODY BLANKS TRANSPORT SYSTEM,

FAEL HSW-P-EAR22-360 FULLY AUTOMATIC WELDER, SET UP TO ACCEPT

ROLL FORMED BODY BLANKS WITH EARS ATTACHED, TOOLED 610 DIAMETER. KATO BRUSHLESS FREQUENCY CONVERTER, OVERHEAD MAGNETIC DISCHARGE CONVEYOR. SET UP FOR LIQUID INSIDE SPRAY. (2 UNITS AVAILABLE)

FEDERAL 717FCM-2 EAR CLINCHER UNIT IS AUTOMATICALLY FED BODY

BLANKS FROM BART SYSTEM TRANSPORTED DOWN, HAS EARS CLINCHED ONTO BODY BLANKS.

CROWN MODEL 301 BEADER, TOOLED 610 DIA BY 708 HIGH. UNIT FEATURES

8 STATION BEADING TURRET WITH 2 UP, 2 DOWN BEAD PATTERNS.

BLH MODEL 302 DIE FLANGER, TOOLED 610 DIAMETER BY 708 HIGH.

UNIT FEATURES 4 STATION DIE FLANGING TURRET TO GRAVITY DISCHARGE.

FLYNN MODEL AF9 CURING OVEN, 9 METERS, SET UP WITH DUAL BANDS AT

4 INCHES APART ON CENTER.

BLISS 1103 SCROLL SHEAR TOOLED 610 DIAMETER, DIE BED CUT OUT,

DEXTER SHEET FEEDER MODEL TF MAXIMUM SHEET SIZE 38X38, 4 FOOT LONG POWERED ROLLER CONVEYOR. (2 UNITS AVAILABLE)

BLISS 1831 STRIP FED PRESS, SINGLE DIE, TOOLED FOR 610 DIAMETER, (2

UNITS AVAILABLE)

BLISS C 35 TON COMPONENT FED END PRESS, SLIDE ADJUSTMENT 2-

1/2 INCHES, STROKE 5 INCHES, TOOLED FOR 610 DIAMETER, SINGLE GREGORY KICKER, GRAVITY DISCHARGE (3 UNITS AVAILABLE).

CAMERON 314 STRIP FED PRESSES (5 UNITS AVAILABLE TOOLED FOR

200 AND 202 AEROSOL BOTTOMS, 211 AEROSOL TOPS).

BLISS MODEL 102S TRANSFER PRESS, FEATURES ROTARY DISK INFEED TO

RECIPROCATING FEED BAR, 5 OPERATION STATIONS, SET UP FOR 211 DIAMETER AEROSOL TOPS, DISCHARGE THROUGH 4 INCH WIDE FLAT BELT DISCHARGE.

CONTINENTAL CAN CO. 5CD LINERS, WITH THE FOLLOWING

CONFIGURATIONS 200DIAMETER AEROSOL DOME BOTTOMS. 211 DIAMETER AEROSOL BOTTOMS 211 DIAMETER AEROSOL TOPS

GRACE MODELS 19 and 24W SINGLE LANE LINERS, FITTED WITH

MECHANICAL GUN, PNEUMATIC END STOP, SET UP FOR WATER BASE COMPOUNDS.

GRACE MODEL HCE SINGLE LANE LINER WITH ELECTRIC GUN, UNIT

DISCHARGES DIRECTLY TO A SINGLE LANE PACKING STATION WITH A MAGNETIC WHEEL UPSTACKER, 3 FOOT LONG PACKING TRAY.

MOUNTAINGATE STYLE SINGLE LANE END CURING OVENS 42 INCH LONG

HEAT TUNNEL, MOUNTED POWER PANEL WITH RKC TEMPERATURE CONTROLLER. WITH VARIOUS CONFIGURATIONS TO INCLUDE 211 DIA AEROSOL DOME BOTTOMS 200 DIA AEROSOL CONE TOPS 112 DIA AEROSOL CONE TOPS 211 STANDARD BOTTOMS

PAINT CAN LINE SET FOR 610X711 AND 610X709 HEIGHT CURRENTLY RUNNING

711, EAR CLINCHING LINE FOR TO INCLUDE: 1) CONTINENTAL CAN 361-ST3 DUPLEX SLITTER WITH FEEDER, 2) BART II AUTOMATIC BODY BLANK ROBOT, 3) HOPKINS EAR CLINCHER, 4) FAEL BODY MAKER MODEL HSP22-360EC, KATO FREQUENCY CONVERTER, LIQUID INSIDE SPRAY, OVERHEAD MAGNETIC DISCHARGE CONVEYOR A270 WELD MONITOR, 5) MAGNETIC SPRAY CONVEYOR, 12 FEET LONG AND MAGNETIC ACCELERATING CONVEYOR, 6) FLYNN 9 METER CURING OVEN, 7) MAGNETIC OVER-THE-HUMP ELEVATOR, 8) ONE LOT OF HONE CHAIN CONVEYING, 9) ANGELUS 50P CF DOUBLE SEAMERS SET UP FOR 610 DIAMETER PAINT CAN RINGS AND BOTTOMS.

F STYLE CAN LINE FOR ONE GALLON CANS FACTORY FINISH IS

402X610X907 RATED FOR 90 CANS PER MINUTE TO INCLUDE; 1) CONTINENTAL CAN COMPANY MODEL 361-ST2 DUPLEX SLITTER WITH DEXTER SHEET FEEDER. 2) FAEL BODYMAKER MODEL MST12-360, 3) SABATIER EXPANDER, ‘F’ STYLE ONE GALLON CANS 4) FLYNN 9 METER CURING OVEN, 5) ACCELERATING CONVEYOR, 6)MAGNETIC OVER-THE-HUMP ELEVATOR, 7) BLISS MODEL 1420 DIE FLANGER, 8)ONE LOT OF HONE CHAIN CONVEYING, 9) ANGELUS MODEL 94P-6 DOUBLE SEAMER S FOR ‘F’ STYLE BOTTOMS AND TOPS, 11) THREADER FOR TOPS OF THE ENDS, 12) CURING OVEN, TOP DOWN CURING, 13) MAGNETIC OVER-THE-HUMP ELEVATOR, 14) BORDEN MODEL 500 24 POCKET AIR TESTER, 15) FUSION INC. HANDLE APPLICATOR CAN, 16) VIDEO JET MODEL EXCEL, 17) OVEN, TOP DOWN CURING FOR SOLDERED HANDLES, 18) MAGNETIC OVER-THE-HUMP ELEVATOR.

F STYLE ONE GALLON BOTTOMS AND TOPS CALLAHAN MODEL

GSE STRIP FED PRESSES, DUAL FEED SCREW UPSTACKER, END FED TO CAMERON MODEL 176 SINGLE LANE CURLER

F STYLE HANDLES FOR THE ONE GALLON CANS. 1) SINGLE

WHEEL UNCOILER, PINCH ROLL / COIL STRAIGHTENER SYSTEM WITH 8 SETS OF LEVELLING ROLLS, 2) BLISS MODEL 20C SINGLE DIE PRESS HANDLES ARE PREFORMED AND CUT, 3) HANDLES ARE GRAVITY FED TO A MAGNETIC BELT ELEVATOR, 4) LAZY SUSAN STYLE UNCOILER.

610 DIAMETER RING LINE ; 1) CONTINENTAL CAN MODEL 9BSS

SCROLL SHEAR, DIE BED CUT OUT, CURRENTLY UNTOOLED. 2) DEXTER SHEET FEEDER MODEL TF 44X44, 4 FOOT LONG POWERED ROLLER CONVEYOR, 3) CONTINENTAL CAN MODEL 175-AP STRIP FED PRESS, 1ST OPERATION PRESS, 4) INCLINE END ELEVATOR 6 FEET TALL, 5)

COMPONENT FED 2ND OPERATION PRESS MODEL 123P1, 6) 6 FOOT TALL INCLINE END ELEVATOR, 7) COMPONENT FED CONTINENTAL CAN COMPANY MODEL EEP 3RD OPERATION PRESS, SINGLE WHEEL 270 DEGREE SEGMENT CURLER.

610 DIAMETER PLUG LINE; 1) CONTINENTAL CAN COMPANY

MODEL 9A-SS SCROLL SHEAR, DIE BED CUT OUT, 2) DEXTER SHEET FEEDER 44X44, 3) CONTINENTAL CAN STRIP FED PRESS, 1ST OPERATION, 4) INCLINE END ELEVATOR, 5) CONTINENTAL CAN COMPANY 18W COMPONENT FED PRESS, 2ND OPERATION.

EAR SLITTER LINE – FOR THE 610 DIAMETER EARS; 1) CONTINENTAL

DUPLEX SLITTER WITH SHEET FEEDER, MODEL 305-GS-1, FITTED WITH CARBIDE KNIVES, 1ST OP TWO SETS, 2ND OP HAS SINGLE CHAIN ON CENTER AND ELEVEN SETS WITH A 10 POCKET ADJUSTABLE STACKING TABLE.

610 EAR PRESS – STAMPS OUT THE EARS FOR PAINT CANS. 1) 1ST OPERATION

CONTINENTAL STRIP FED PRESS, SINGLE LANE MAGNETIC ELEVATOR, 2) 2ND PRESS – TINENT MODEL NO. 123-P, COMPONENT FED PRESS, DOUBLE DIE, 3) 3RD OPERATION PRESS BLISS DOUBLE DIE, 24 INCH FLYWHEEL, GRAVITY DISCHARGE, DUAL LANE INCLINE ELEVATOR.

HELPER LINE FOR THE EAR PRESS CONTINENTAL CAN MODEL 207PGF,

DOUBLE DIE STRIP FED PRESS, VIBRATORY SYSTEM THAT SEPARATES THE EARS INTO TWO LANES TO A COMPONENT FED BLISS PRESS.

404 DIA PLUG LINE: 1) 1ST OPERATION PRESS CAMERON MODEL 313 STRIP

FED PRESS, 2) 11 FOOT HIGH MAGNETIC END ELEVATOR, 3) 2ND OPERATION COMPONENT FED PRESS CONTINENTAL MODEL 217, 4) 3 FOOT LONG MAGNETIC BELT INCLINE ELEVATOR, BAGGING STATION WITH MAGNETIC WHEEL UPSTACKER.

404 RING LINE: 1) 1ST OPERATION CAMERON MODEL 248 STRIP FED

PRESS, 11 FOOT MAGNETIC INCLINE BELT ELEVATOR, 2) BLISS 2ND OPERATION COMPONENT FED PRESS, 3)10 FOOT TALL MAGNETIC END ELEVATOR, 4) ROCKFORD 3RD OPERATION COMPONENT FED END PRESS, MODEL NO. 3S, 5) GRACE MODEL 2U SINGLE LANE LINER UNIT HAS ELECTRONIC GUN, 6) 3 FOOT LONG MAGNETIC INCLINE ELEVATOR, SINGLE LANE BAGGING STATION WITH A MAGNETIC WHEEL UPSTACKER.

404 DIAMETER BOTTOM ENDS; 1) CONTINENTAL CAN COMPANY

COMPONENT FED END PRESS MODEL 207-PCF-1, WITH SINGLE 270 DEGREE SEGMENT CURLER, 2) 5 FOOT LONG MAGNETIC INCLINE END ELEVATOR WITH 4 INCH WIDE BELTING AND 5 INCH WIDE FACE, 3) GRACE MODEL 19W8A SINGLE LANE LINER, UNIT HAS ELECTRONIC GUN DISCHARGES INTO A SINGLE LANE PACKING STATION WITH MAGNETIC DUAL UPSTACKER AND A 6 FOOT LONG BAGGING TRAY.

BLISS 1103 SCROLL SHEAR WITH DEXTER SHEET FEEDER. PRESS HAS

SLOT IN CENTER OF DIE BED, LAST RAN 610 DIAMETER ENDS, CUT IN CENTER OF DIE BED

UNITED CAN SCROLL SHEAR, SINGLE CHAIN ON CENTER TO DUAL

RECIPROCATING FEED BARS WITH FEED FINGERS, UNTOOLED, CUTOUT IN DIE BED AREA.

COMPLETE SCROLL SHEAR LINE, 6 FOOT LONG ROLLER INFEED CONVEYOR,

BORDEN 232 SHEET FEEDER, OXYDRY SHEET WAXER, BORDEN SCROLL SHEAR, DEXTER SCROLL STRIP STACKER. (2 LINES AVAILABLE TOOLED FOR 211 DIAMETER AEROSOL BOTTOMS)

COMPLETE SCROLL SHEAR LINE, 6 FOOT LINE POWERED ROLLER

CONVEYOR, DEXTER SHEET FEEDER, OXYDRY SHEET WAXER, CONTINENTAL CAN COMPANY 9B-SS SCROLL SHEAR, DEXTER SCROLL STRIP STACKER. (3 LINES AVAILABLE ONE EACH FOR 202, 200 AND 207.5)

LITTELL MODEL LM1E COIL CUTTING LINE MFG 1985 SERIAL NUMBER 87843-

85WITH DIGITAL CUT TO LENGTH AND 4 BOX CLASSIFIER INCLUDING THE FOLLOWING: 1) COMMON FRAME MOUNTED COIL UPENDER/COIL CAR/UNCOILER, UNIT CONFIGURED TO ALLOW STAGING OF TWO COILS AND HAVE UNCOILER LOADED WITH ONE COIL CAPACITY 25000LBS, 2) LIGHT BOX OPERATOR INSPECTION STATION, 3) LITTELL LEVELER WITH INTEGRATED PRATT & WHITNEY ROLLING MICROMETER, 4) LITTELL SHEAR INCLUDES INTEGRATED SEMS UV PINHOLE DETECTOR DIGITAL CUT TO LENGTH WITH THREE POST SHEAR, 5) LITTELL FOUR BOX CLASSIFIER UNIT HAS BOTH A & B PRIME PLATE STACKING BOXES AND TWO REJECT STACKING BOXES, ONE FOR PINHOLE AND ONE FOR OVER/UNDER GAGE, 6) DIGITAL CUT TO LENGTH SYSTEM IS ORMEC, CONTROLS ARE PLC ALSO INCLUDED IS MOTORIZED DIE LIFT TABLE AND PNEUMATIC GAUGING TABLE, ROCKWELL HARDNESS TESTER.

SHEET WAXING LINES CONSISTING OF; 1) DEXTER SHEET FEEDER WITH

10 FOOT LONG ROLLER CONVEYOR, 2) OXYDRY ELECTROSTATIC SHEET WAXER, 3) DEXTER MODEL PE SHEET STACKER SERIAL NUMBER 20931, MAXIMUM SHEET SIZE 36X44 INCHES. (2 LINES AVAILABLE)

COMPLETE 2 COLOR TANDEM PRINTING LINE WITH TRAILING

VARNISH UNIT, LINE IS CONFIGURED TO RUN BETWEEN 65-75 SHEETS PER MINUTE, WITH 36x45IN PRINTERS INCLUDES A EPIC DAMPENING SYSTEMS AND GRAPHICS MICROSYSTEM INC. COMPUTERIZED INK CONTROL SYSTEM. 2 LINES AVAILABLE STILL INSTALLED AND IN OPERATION

COMPLETE 2 COLOR TANDEM UV PRINTING LINE WITH TRAILING

VARNISH UNIT, FITTED WITH INTERDECK UV CURING SYSTEM. LINE IS CONFIGURED TO RUN BETWEEN 65-75 SHEETS PER MINUTE, WITH

36x45IN PRINTERS INCLUDES A EPIC DAMPENING SYSTEMS AND GRAPHICS MICROSYSTEM INC. COMPUTERIZED INK CONTROL SYSTEM STILL INSTALLED AND IN OPERATION

SHEET COATING LINE CONSISTING OF THE FOLLOWING: 1)DEXTER SHEET

FEEDER, 2) WAGNER 15X44 INCH COATER WITH DOUBLE SCRAPERS, 3) WAGNER SIX ZONE OVEN APPROXIMATELY 180 FEET LONG INCLUDING COOLING ZONES WITH MAXON BURNERS. OVEN DISCHARGE INCLUDES A MAGNETIC SHEET STRIPPER, 4) DEXTER 9000LB SHEET STACKER WITH WAGNER INLINE BUNDLE TURNER AND A 10 FOOT POWER ROLLER DISCHARGE CONVEYOR. (TWO LINES AVAILABLE)

HIGH SPEED SHEET COATING LINE CONSISTING OF; 1) DEXTER MODEL TF

9000LB SHEET FEEDER, MAXIMUM SHEET SIZE 44X44, 2) WAGNER 15 INCH SHEET COATER WITH DUAL SCRAPERS AND PNEUMATIC COATING FEED SYSTEM WITH DUAL NORDSON HEATERS. WET SHEET BLANK FEED TABLE, 3) YOUNG BROTHERS WICKET OVEN NATURAL GAS FIRED WITH FOUR HEATING ZONES AND COOLING ZONE OVERALL LENGTH IS 180 FEET WITH MANY UPGRADES INCLUDING HONEYWELL DIGITAL CIRCLE CHART RECORDER/TEMPERATURE RECORDER, ELECTRICAL CONTROLS FEATURE UPGRADE TO PLC, WITH GRAPHIC INTERFACE SCREEN, BELT DRIVEN SHEET STRIPPER, 4) DEXTER 9000LB FULLY AUTOMATIC SHEET STACKER 44X44 SHEET CAPACITY, 5) LUTHI BUNDLE TURNER MODEL BT-10R, 10 FOOT LONG POWERED ROLLER CONVEYOR.

HIGH SPEED SHEET COATING LINE CONSISTING OF;

1) DEXTER FULLY SHEET FEEDER MODEL 6MTF MAXIMUM SHEET SIZE 36X44 INCHES 2) WAGNER 15 INCH SPOT COATER WITH DUAL SCRAPERS, ANILOX METERING SYSTEM, WET SHEET OVEN INFEED CONVEYOR TABLE, 3) WAGNER 6 ZONE WICKET OVEN APPROXIMATELY 180 FEET LONG INCLUDING COOLING SECTION 6 HEATING ZONES, HONEYWELL DIGITAL CIRCLE CHART CONTROLLERS WITH ALLEN BRADLEY SLICK 504 ELECTRICAL CONTROLS AND ALLEN BRADLEY AC INVERTER DRIVES. OVEN DISCHARGE BELT DRIVEN SHEET STRIPPER, 4) WAGNER MODEL 6MBD AUTOMATIC SHEET STACKER MAXIMUM SHEET SIZE 36X44, 5) LUTHI INLINE BUNDLE TURNER 10 FOOT LONG POWER ROLLER CONVEYOR

VARIOUS MISCELLANEOUS EQUIPMENT ALSO AVAILABLE TO

INCLUDE VIDEO JET EXCEL 170i INK JET PRINTERS. (2 UNITS AVAILABLE) COATING ROLL GRINDING SYSTEM. WAGNER IN LINE BUNDLE TURNER, LANTECH SINGLE HIGH OFF LINE WRAPPER, WAGNER 15 INCH COATER, NIPPON WATER CHILLER, MAGNETIC ACCELERATOR CONVEYOR AND ELEVATORS, 300 FEET OF MILD STEEL CABLE TRACK, INCLINED MAGNETIC ELEVATOR,SINGLE LANE PACKING STATION, AUTOMATIC MAGNETIC BODY BLANK FEEDER.

PVATO

NENT F217, 4)NCLIN

)

WR.

L) 11OR, )

ED PRE3 FOOT

EL

A 1) 1SMODEL

)

T HIGH M2ND OSS

NRS

T FED B

OPERATIO313 STMAG

TGF,

ATORY INTO

SSLONF

ILS E COIL C

OPERAITT

IMOR/CORED

HAVAPAQL CUT

NCLUDINFRAME

IL CAR/UTO ALLOW

U

U1E CO

ERIAL NUMTO LENGT

G THE FMOU

IH

L CUBERANDD

KER. (FOR 202,

(

UTTING8784

AL S

COPNEUDUALBLAW

TH

CONS000LB ZE 44X

ER MATIA

0IZ

UL

ISPEISTIHEET4, 2)

ITOWER

TWO LINED SHEENG OF; 1

FEED

NHE

HEET STAUNDLE TU

ROLLER DES AVAILA

T C

ACH

VE, SEEL DIS

MEMORGLE PS1TRO

NOC

DIATURES EROKE, NO OOL VALVCHARGE,

Y

OONTR

KET TESTMETER PALECTRIC

CAN NOT

CADUAL W

D20 UPOL UPG

R, SET CH

L W TO

AN NO WHEEL

ADEDE. U

F4 IEB H

TOOUNIT FETURRET

FLYNN MMETEN

RAD PAT

MODELLED 610 DATURES 4 S

O GRAVO

E1 BEA

HIGH. U TURRETNS.2 DIEET

XNTO

DER, TOOFEATUR

WITH 2 UCODY

RTED BO

OLED

ALM8) 9) ANGE)

UP FOR 6)

AND BOT

FU

NVETIC AC

LYNN 9 METIC OVE

LOT OF LUS 50P10

SCH

MONITOYOR, 12 CCELERAT

ETER CR-THE-I

PRAARGE

R, FEEING RIV

)P22

)

CONVAY, OVE

CON) MAG

LONE, 3)FAEL , )

360EC, ERTER,

HEAD EYOR


New Products & Equipment

Intralox’s ThermoDrive linkupIntralox of the US has recently part-nered with US-based Mol Belting Systems in order to become the provider of ThermoDrive conveyor belting. ThermoDrive belting is a positive-drive, low-tension belting with a continuous, easy-to-clean surface. Like Intralox modular plas-tic belting, Intralox ThermoDrive belts are suited for hygienic appli-cations in food processing. With a 100% closed surface, these homogenous, thermoplastic belts can dramatically improve food safety, quality assurance, and operational efficiency.

ThermoDrive, LLC (a Mol Belting Systems subsidiary) will continue to manufacture ThermoDrive belt-ing, while Intralox will provide belt fabrication, sales, and support. Intralox ThermoDrive products

are currently available in the US, Canada and Europe. Service will soon be extended to Australia, New Zealand, Asia and Latin America.

Independent Can opts for second Metalstar

US can maker Independent Can has decided to order a KBA-Metalprint four-colour Metalstar 2 UV line. This is the second Metalstar 2 at the site, following the first installation of a six-colour Metalstar 2 in 2004. This printing line will be extended in a second step with a Sprint Revolver Coater Type 490, allowing the company to execute a six-colour print as well as applying the overvarnish in one pass. Commissioning is planned for the end of July 2009.

Pat Hennegan, general manag-er of lithography at Independent notes, “The decisive factor for our decision was the consistent quali-ty and productivity achieved with the Metalstar 2 as Independent Can is committed to remain on the cutting edge of metal deco-rating technology”. Independent Can specialises in high-quality specialty cans and general line

Victus of the US has launched a liquid supplement called Enterx Kidz for 1-13 year olds with spe-cial dietary needs. The Kidz prod-uct is a nutritional beverage for children that provides 32 mg of DHA per eight-ounce serving, as well as additional calories, protein and vitamins. The drink is lactose and glucose free. The prod-uct is sold on-line in the US and will be available in hospitals and care cent-ers in numer-ous coun-tries in South America.

A victory for Kidz


www.victus.com


www.kba-metalprint.de

and serves both the US and over-seas markets.

In related news, the world’s sec-ond largest packaging manufac-turer Toyo Seikan is said to have placed an order for an eight-col-our Metalstar 2.

The line is be due to com-missioned in autumn 2009 and will provide printed metal sheets to the various factories of Toyo Seikan in Japan. It is one of the biggest metal decorators ever installed and configured, accord-ing to reports. The company had previously installed an eight-col-our Metalstar 2 in 2005, and this new machine is in addition to it. This project will further increase efficiency and competitiveness and strengthen the company’s market position in Japan.


www.intralox.com.

US-based organic food compa-ny Eden Foods has added four organic rice and beans prod-ucts to its six varieties of rice and beans: Spanish, Mexican, Curried, and Moroccan. All are packaged in bisphenol-A free 15-ounce cans, the firm notes. Spanish rice and pinto beans is enveloped in a sauce of 100% organic toma-toes, vegetables, herbs, and spic-es; mexican rice and black turtle beans offers 100% organic toma-toes, chillies, herbs, and spices; curried rice and green lentils fea-tures organic onions and organic curry spices such as turmeric; and Moroccan rice and garbanzo

beans has Lundberg o r g a n i c short grain rice and chickpeas s p i c e d with cori-ander, tur-meric, and cumin.

Eden Foods adds more BPA-free varieties

For further informaton, please visit

www.edenfoods.com

P.36 NEW EQUIPMENT*.indd 40 21/4/09 16:48:40


April 2009

Far East Steel Conference28-29 April, Sofitel Wanda, Beijing, ChinaContact: Metal Bulletin EventsE-mail:[email protected]: +44 20 7779 7999Web: www.metalbulletin.com/events

May 2009

12th Annual Aluminum Welding Conference and Exhibition5-6 May, Radisson Plaza Mississauga Toronto Airport, Toronto, Ontario, CanadaContact: American Welding SocietyTel: +1 305 443 9353 ext 455 E-mail: [email protected] Web: www.aws.org/w/a/conferences/aluminum

International Metal Decorators Association Conference21-22 May, Chicago Indian Lakes Resort, Illinois, USAContact: IMDATel: +1 410 252 5205Fax: +1 410 628 8079E-mail: [email protected]: www.metaldecorators.com

International Soft Drinks Conference 27 May, Grand Hotel, Vienna, AustriaContact: Canadean Corporate Marketing Department Tel: +44 1256 394210 E-mail: [email protected]: www.canadean.com.

June 2009

Pack & Gift - the Exhibition for Event-base and Promotional Packaging3-4 June, Porte de Versailles, Paris, FranceContact: IdiceE-mail: [email protected]: +33 4 74 73 42 33Web: www.packandgift.com

Cannex Asia Pacific8-10 June, Guangzhou, ChinaContact: SPG EventsTel: +44 1293 435100Fax: +44 1293 619988Web: www.spgevents.com

European Tube Manufacturers Association Congress10-12 June, Istanbul, TurkeyContact: Gregor Spengler, Etma Secretary General Tel: +49 211 4796 144 E-mail: [email protected] Web: www.etma-online.org

ProPak Asia17-20 June, BITEC, Bangkok, ThailandContact: Marek Szandrowski, Overseas Exhibition Services Tel: +44 20 7840 2108E-mail: [email protected]: www.propakasia.com

Expo Pack Mexico23-26 June, Centro Banamex, MexicoContact: Laura Thompson, PMMITel: +1 703 243 8555Fax: +1 703 243 8556E-mail: [email protected]: www.pmmi.org/expopack

July 2009

Propak China incorporating China BevTek 15-17 July, SNIEC, Shanghai, ChinaContact: Marek Szandrowski, Overseas Exhibition Services Tel: +44 20 7840 2108E-mail: [email protected]: www.propakchina.com

September 2009

Drinktec 200914-19 September, Munich, GermanyContact: Messe München

Tel: +49 89 9 49113 18E-mail [email protected]: www.drinktec.com

24th International Aluminium Conference14-16 September, Hilton Hotel, Düsseldorf, GermanyContact: Metal Bulletin EventsE-mail: [email protected]: +44 20 7779 7999Web: www.metalbulletin.com/events

Pack Print International23-26 September, BITEC, BangkokContact: Messe Duesseldorf Asia Pte Ltd, Singapore 099254Tel: +65 6332 9620E-mail: [email protected]: www.pack-print.de

November 2009

Asia CanTech 2009The Conference for Can Makers & Fillers in the Asia Pacific Region15-17 November, Royal Orchid Sheraton Hotel, Bangkok, ThailandContact: Chrissy PayneTel: +44 1474 532202E-mail: [email protected]: www.asia-can.com

Events Diary

Th e Technical Conference for Can Makers

and Fillers in the Asia Pacifi c Region

[email protected]

Can TechINTERNATIONAL

Organised by

Can TechCanCanTechAsia2009

Bangkok, Th ailand

Th e Technical Conference for Can MakersTh e Technical Conference for Can MakersTh e Technical Conference for Can Makers

CanCanCanCanCan2008 RATES HELD

15-17 NovemberRoyal Orchid Hotel

Bangkok, Th ailandBangkok, Th ailandBangkok, Th ailandBangkok, Th ailandBangkok, Th ailandBangkok, Th ailand

P.37 DIARY.indd 23 22/4/09 11:12:04

July/August 2008 CanTech International

Aerosol Manufacturing Equipment

CarnaudMetalbox Engineering plcDockfield RoadShipleyWest Yorkshire BD17 7AY UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com

Germann + Frei AGMartinsbruggstrasse 92CH-9016 St. GallenSwitzerlandTel: +41 71 282 16 40Fax: +41 71 282 16 50E-mail: [email protected]: www.germannfrei.ch

Lanico Maschinenbau Otto Niemsch GmbHPO Box 3065D-38020 BraunschweigGermanyTel: +49 531 809 060Fax: +49 531 809 0627E-mail: [email protected]: www.lanico.de

Shin-I Machinery Works Co Ltd No 43 Chung Cheng St Chingshui Taichung Taiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com

Styner + Bienz FormTech LtdFreiburgstrasse 5563172 NiederwangenSwitzerlandTel: +41 31 980 8111Fax: +41 31 980 8166E-mail: [email protected]: www.styner-bienz.com

Anilox Coating Systems

Anilox Metering TechnologyUnit NM10, The New Mill,George Street, MilnsbridgeHuddersfield HD3 4JD, UKTel: +44 1484 652 680Fax: + 44 1484 652 228E-mails: [email protected] [email protected] [email protected]: www.aniloxmt.com

John M Travis LtdGlobal Anilox and Printing SolutionsEast Coast USA, European and Asian Operations578 Overlook DriveLancaster, OH 43130, USATel: +1 740 689 2914Fax: +1 740 654 7159

West Coast USA and Latin American Operations27031 Trinity HeightsSan Antonio, TX 78261, USATel: +1 740 407 0685Fax: +1 830 438 5782E-mail: [email protected]: www.travisltd.com

Bailing Machines

Sargiani SpAVia Farnesiana 8429100 Piacenza ItalyTel: +39 0523 615 250Fax: +39 0523 593 938E-mail: [email protected]: www.sargiani.com

Base Reforming Machines

Belvac Production Machinery Inc237 Graves Mill Road LynchburgVA 24502-4203USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com

Base Reforming Machines

CarnaudMetalbox Engineering plcDockfield RoadShipleyWest Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com

Beading Units

CarnaudMetalbox Engineering plcDockfield Road, ShipleyWest Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com


Bearings

RBC Bearings IncOne Tribology Center102 Willenbrock RoadOxford, CT 06478, USATel: 800 390 3300 (toll free in US)Tel: +1 609 882 5050 (international)Fax: +1 609 882 5533E-mail: [email protected]: www.rbcbearings.com

Body Makers D+I

CarnaudMetalbox Engineering plcDockfield RoadShipleyW Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com

OKL Can Line Inc11235 Sebring DriveCincinnatiOH 45240USATel: +1 513 825 1655Fax: +1 513 825 1948E-mail: [email protected]: www.oklcan.com

Can Decorating Equipment

Intercan GroupTavistock House, Tavistock Street, BletchleyMilton KeynesMK2 2PG, UKTel: +44 1908 270041Fax: +44 1908 270043E-mail: [email protected]: www.intercan.co.uk

Can & Double Seam Testing Equipment

CMC-KUHNKE, Inc250 Falls Road, HudsonNew York 12534USATel: +1 518 828 9345Fax: +1 518 828 8580E-mail: [email protected]: www.cmc-kuhnke.com

CMC-KUHNKE, GmbHColditzstr. 34-36, Bau 18D-12099 BerlinGermanyTel: +49 30 2300 660Fax: +49 30 2300 6666E-mail: [email protected]: www.cmc-kuhnke.com

Wilkens-Anderson Company4525 West Division StreetChicagoIL 60651USATel: +1 773 384 4433Fax: +1 773 384 6260E-mail: [email protected]: www.waco-lab-supply.com

March 2009 CanTech International 38

To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203

Email: [email protected] guide

P.38-53 BUYERS GUIDE APRIL09.indd 38 21/4/09 10:06:31


To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected] Buyers guide

Can End Dies

Amador Varas SAc/Montalegre 3208915 BadalonaBarcelonaSpainTel: +34 933 952 954Fax: +34 933 954 904E-mail: [email protected]: www.amador-varas.com

Apex Tool Works Inc3200 Tollview DriveRolling MeadowsIL 60008USATel: +1 847 394 5810Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com

Euro Tecno Tool srlStrada Martinella92 Alberi di Vigatto43010 Parma, ItalyTel: +39 0521 645942Fax: +39 0521 645949E-mail: [email protected]: www.eurotecnotool.com

Standard Engineering Group, Inc3394 Miller Park Road, Suite 100AkronOhio 44312, USATel: +1 330 896 4700Fax: +1 330 896 4701Web: www.standardengineering-group.com

Can Line Control Systems

Roeslein & Associates Inc9200 Watson Road, Suite 200St LouisMO 63126-1528, USATel: +1 314 729 0055Fax: +1 314 729 0070E-mail: [email protected]: www.roeslein.com

Can Making Machines and Complete Lines

Golden Eagle Food Machinery Co

Shen Jia Men, Zhon Shan CityZhejiang Province, 316100ChinaTel: +86 580 366 3066Fax: +86 580 366 3633E-mail: manager@ goldeneagle-can-machinery.comWeb: www.goldeneagle-can-machinery.com

Hor Yang Machinery Industries Co LtdNo. 48, Sing Gong RdChuansing Industrial ParkShen Gang TownshipChang Hua County, 50971TaiwanTel: +886 4799 1567Fax: +886 4799 1509E-mail: [email protected]: www.horyang.com

MEL, Second Hand Canmaking Machinery Poligono Industrial El SequeroAvda del Ebro, 22 26150 Agoncillo - La RiojaSpain Tel: +34 609 448282 Fax: +34 941 431144 E-mail: [email protected] Web: www.mel.es

Sargiani SpAVia Farnesiana 8429100 PiacenzaItalyTel: +39 0523 615 250Fax: +39 0523 593 938E-mail: [email protected]: www.sargiani.com

Shin-I Machinery Works Co Ltd No 43 Chung Cheng St Chingshui TaichungTaiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com

Soudronic AGIndustriestrasse 35CH-8962 BergdietikonSwitzerlandTel: +41 44 743 66 66 Fax: +41 44 743 66 99E-mail: [email protected]: www.soudronic.com

Stuurman BVPO Box 35 1520 AA WormerveerThe NetherlandsTel: +31 75 6283551Fax: +31 75 6286037E-mail: [email protected]: www.stuurmanbv.com

Can Testing Equipment

BA.SCO srlVia Borgognone 910090 Trana (Torino)ItalyTel: +39 0119 33620Fax: +39 0119 355 763E-mail: [email protected]: www.basco-testers.com

Bonfiglioli Engineering SrlVia Rondona 3344018 Vigarano PieveFerraraItalyTel: +39 0532 715 631Fax: +39 0532 715 625E-mail: [email protected]: www.bonfiglioliengineering.com

CMC-KUHNKE, Inc250 Falls Road, HudsonNew York 12534, USATel: +1 518 828 9345Fax: +1 518 828 8580E-mail: [email protected]: www.cmc-kuhnke.com

CMC-KUHNKE, GmbHColditzstr. 34-36, Bau 18D-12099 BerlinGermanyTel: +49 30 2300 660Fax: +49 30 2300 6666E-mail: [email protected]: www.cmc-kuhnke.com

METOP ABQUALITY CONTROL

METOP AB Ringugnsgatan 1021616 LimhamnSweden Tel: +46 40 163235Fax: +46 40 164770E-mail: [email protected]: www.metop.com

Production Tool & Gage, Inc. 6557 Watson StreetUnion CityGA 30291, USA Tel: +1 770 964 5813Fax: +1 770 969 2801E-mail: [email protected]: www.productiontool.com

Sencon

Web: www.sencon.comNorth & South AmericaTel: +1 708 496 3100E-mail: [email protected]

Europe – Middle East – AsiaTel: +44 1905 755525E-mail: [email protected]

France – Spain – GermanyTel: +33 499 133 720E-mail: [email protected]

Versatile Technology2 Industrial Avenue, Notting HillVictoria 3168, AustraliaTel: +61 3 9548 8983Fax: +61 3 9548 8958E-mail: [email protected]: www.versatiletechnology.com.au








Wilco AGRigackerstr 11CH-5610 WohlenSwitzerlandTel: + 41 56 618 4343Fax: +41 56 618 4344E-mail: [email protected]: www.wilco.com

Yuan Rox Machinery Co LtdNo 69 Lane 22Sec 1 Hsin Jen Rd, Tai-Ping CityTaichung 411Taiwan ROC Tel: +886 4 227 550 11 Fax: +886 4 227 544 64 E-mail: [email protected] Web: www.yuanrox.com

Can Trimmers

Belvac Production Machinery Inc237 Graves Mill Road LynchburgVA 24502-4203, USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com


Can Washer Holdown Mats & Belts

Ashworth Bros, Inc 450 Armour DaleWinchesterVA 22601, USA Tel: +1 540 662 3494Fax: +1 540 662 3150E-mail: [email protected]: www.ashworth.com

Can Washers

Cincinnati Industrial Machinery4600 N. Mason-Montgomery RdMason, OH 45040, USAToll Free: 800 677 0076Tel: +1 513 923 5600 Fax: +1 513 923 5694E-mail: [email protected]: www.cinind.com

Can Washers/Ovens

Cincinnati Industrial Machinery4600 N. Mason-Montgomery RdMason, OH 45040USAToll Free: 800 677 0076Tel: +1 513 923 5600 Fax: +1 513 923 5694E-mail: [email protected]: www.cinind.com

Worldwide Headquarters:International Thermal Systems LLC4697 W Greenfield AvenueMilwaukee, WI 53214, USATel: +1 414 672 7700Fax: +1 414 672 8800E-mail: [email protected] Web: www.itsllcusa.com

European Office:International Thermal Systems Ltd11 Ham Common, RichmondLondon TW10 7JB, UKTel: +44 7900 191 352E-mail: [email protected]

Asian Office:ITS Industrial Thermal Equipment Co LtdTel: +86 21 6774 1033Fax: +86 21 6774 2860E-mail: [email protected]

VMI EPE Holland BVGelriaweg 168161 RK EpeThe NetherlandsTel: +31 578 679 111Fax: +31 578 621 317E-mail: [email protected]: www.vmi-group.com

Capping Machines

Sommetrade SLParque Tecnologico de Zamudio -Edificio 301, 48170 Zamudio (Vizcaya)SpainTel: +34 94 431 8611Fax: +34 94 431 8200E-mail: [email protected]: www.sommetrade.com

Cap Making Machines

Apex Tool Works Inc3200 Tollview DriveRolling MeadowsIL 60008USATel: +1 847 394 5810Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com

Bortolin Kemo SpACorso Lino Zanussi 34/b33080 Porcia (PN)ItalyTel: +39 0434 922 010Fax: +39 0434 921 733E-mail: [email protected]: www.bortolinkemo.com

Cantec GmbH & Co KGHelenenstrasse 149D-45143 EssenGermanyTel: +49 201 633 1461Fax: +49 201 633 1239E-mail: [email protected]: www.cantec.com

Rainer Naroska Engineering GmbHPlatanenstrasse 732108 Bad Salzuflen, GermanyTel: +49 5261 6606 0Fax: +49 5261 6606 30E-mail: [email protected]: www.naroska.com

Ceramic Can & End Tooling

Lieb Precision Tool, Inc1225 Aeroplaza DriveColorado SpringsCO 80916, USATel: +1 719 637 8713Fax: +1 719 596 3019Operation Manager: Mike SimonsonE-mail: [email protected] [email protected]: www.liebpt.com

Wallram GmbHKaninenberghoehe 5045136 EssenGermanyTel: +49 201 89636 660Fax: +49 201 89 63 630E-mail: [email protected] Web: www.wallram.de

Coating and Viscosity Control

opti-color GmbHVor dem Dorf 2-12D-31162 Bad SalzdetfurthGermanyTel: +49 5064 8077Fax: +49 5064 8187E-mail: [email protected]: www.opti-color.de

Coating Machines

Billhoefer Maschinenfabrik GmbH & Co KGGutenstetter Strasse 20D-90449 NuernbergGermanyTel: +49 911 657 850Fax: +49 911 657 8550E-mail: [email protected]: www.billhoefer.de


CanTech International April 2009

To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected]

Buyers guide

41

Coating Machines

Crabtree of Gateshead LtdKingsway, Team Valley Trading EstateGatesheadTyne & Wear NE11 0SU, UKTel: +44 191 487 5071Fax: +44 191 487 3997E-mail: [email protected]: www.crabpress.co.uk

KBA-MetalPrint GmbHWernerstr. 119-129D-70435 StuttgartGermanyTel: +49 711 69971-0Fax: +49 711 69971-670E-mail: [email protected]: www.kba-metalprint.de

Lance Machinery Co LtdNo 640-1, Sec 2, Jhanghe RdHemei TownshipChanghua County 508TaiwanTel: +886 4 736 1632Fax: +886 4 736 1693E-mail: [email protected]: www.lancecoater.com

Miotto EsteVia Talamoni 4I-20047 Brugherio (MI)ItalyTel: +39 0392 878 284Fax: +39 0398 84594E-mail: [email protected]: www.miottoeste.it

Coating Machines Bottom Rim


Coatings, Lacquers, Varnishes

World HeadquartersGrace Darex Packaging TW.R. Grace & Co - Conn.7500 Grace Drive, ColumbiaMO 21044, USATel: +1 410 531 4000Fax: +1 410 531 4367

North America 62 Whittemore AveCambridge, MA 02140, USATel: +1 617 498 4987Fax: +1 617 498 4433

Latin America Grace Brazil LtdaRua Albion, 229-10 Andor CJ101Lapa, Sao PauloAP/Brasil 05077-130Tel: +55 113649 2704Fax: +55 113649 2706

Asia Pacific W.R. Grace (Hong Kong) Ltd1010 Huai Hai ZhongShanghai 200031 , ChinaTel: +86 2154678

EuropeGrace GmbH & Co. KGIn der Hollerecke 167547 Worms, GermanyTel: +49 6241 403.00Fax: +49 6241 403 1211

Aluminum Container Coatings CenterGrace SistiagaPoligono Lastaola, Parcela 820120 Hermani, Gipuzkoa, SpainTel: +34 94 355 5414Fax: +34 94 333 1947E-mail: [email protected]

Internorm Kunststofftechnik GmbHRobert-Bosch-Str 549401 Damme, GermanyTel: +49 5491 9691-0Fax: +49 5491 9691-10E-mail: [email protected]: www.internorm.de

Headquarters : LINDGENS Metal

Decorating Coating & Inks ABBox 743, SE- 251 07 Helsingborg, SwedenTel: +46 42 10 88 00 Fax: +42 18 08 34E-mail: [email protected]: www.lindgens.com

LINDGENS MDC&I GmbHCarl-Leverkus Strasse 20,DE-40764 Langenfeldt, GermanyTel: +49 2173 26944 0 Fax: +492173 26944 10E-mail: [email protected]

LINDGENS MDC&IUnit 204 Anglesey Business Park Littleworth Road, HednesfordStaffordshire WS12 1NR, UKTel: +44 1543 87 70 70 Fax: +44 1543 87 70 71E-mail: [email protected]

LINDGENS MDC&I / US PartnerAlden & Ott Printing Inks616 East Brook Drive, Arlington Heights, IL 60005, USATel: +1 847 956 6830 Fax: +1 847 956 6509E-mail: [email protected]

LINDGENS MDC&I / Server Boya A.S.Istanbul Tuzla Kimya Sanayicileri, Organize Sanayi Bölgesi, Kristal Sok. No. 4, 34956 Tuzla, Istanbul, TurkeyTel: +90 216 593 10 30 Fax: +90 216 593 22 35E-mail: [email protected]

LINDGENS MDC&I3 p/o, 59a, office 423140003 Moscow reg, Lubercy, RussiaTel: +7 495 983 34 84Fax: +7 495 983 34 84E-mail: [email protected]

Schekolin AGIndustriestrasse 3FL 9487 Gamprin-BendernPrincipality of LiechtensteinTel. +423 375 75 75Fax +423 375 75 76E-mail: [email protected] Web: www.schekolin.com

North America: The Valspar Corporation Packaging Coatings Group2001 Tracy StreetPittsburgh, PA 15233, USATel: +1 412 766 9300Fax: +1 412 766 4517Web: www.valsparglobal.comE-mail: [email protected] America: The Valspar Corporation LtdaEstrada dos Casa, 5050Bairro AlvarengaSão Bernardo do CampoSP 09840-900BrazilTel: +55 11 4358 9224Fax: +55 11 4358 9228Europe: The Valspar (Switzerland) Corporation AGIndustriesstrasse 9, CH-8627GruningenSwitzerlandTel: +41 44 936 7777Fax: +41 44 936 7778

Asia: The Valspar (Singapore) Corporation Pte Ltd6 Tuas Avenue 8639221, SingaporeTel: +65 6862 0261Fax: +65 6862 0186

Coil Handling Systems

ASC Machine Tools Inc900 N Fancher RoadSpokaneWA 99212USATel: +1 509 534 6600Fax: +1 509 536 7658E-mail: [email protected]: www.ascmt.com

Littell International, Inc 1211 Tower RoadSchaumburgIL 60173USATel: +1 630 622 4700Fax: +1 630 622 4747E-mail: [email protected]: www.littell.com

Complete Can Lines (Three-Piece)

Gebrüder Leonhardt GmbH & Co KGBlema KircheisErdmann-Kircheis-Strasse 13-15D-08280 AueGermanyTel: +49 3771 278 221Fax: +49 3771 278 241E-mail: [email protected]: www.blema.de






42 April 2009 CanTech International


Shin-I Machinery Works Co Ltd No 43 Chung Cheng St , Chingshui TaichungTaiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com

Yuan Rox Machinery Co LtdNo 69 Lane 22, Sec 1 Hsin Jen RdTai-Ping City, Taichung 411Taiwan ROC Tel: +886 4 227 550 11 Fax: +886 4 227 544 64 E-mail: [email protected] Web: www.yuanrox.com

Zhejiang Longwen Machinery Co LtdHehuapuqiao, LinchengZhoushan, Zhejiang 316023 PR ChinaTel: +86 580 309 8399Fax: +86 580 3091717E-mail: [email protected] Web: www.longwen-mach.com

Complete Can Making Lines (Three-Piece) – Used

Container Fabrication Machinery2216 E Miner AvenueStocktonCA 95205USATel: +1 209 469 7384Fax: +1 209 469 4826E-mail: [email protected]: www.canmaking.net

MEL, Second Hand Canmaking Machinery Poligono Industrial El SequeroAvda del Ebro, 22 26150 Agoncillo - La Rioja , Spain Tel: +34 609 448282 Fax: +34 941 431144 E-mail: [email protected] Web: www.mel.es

Complete Can Lines (Two-Piece)

Bay-Kong Industrial Co, LtdNo 17, Lane 397, Yanping Road, Changhua City. TaiwanTel: +886 4 7116 311 Tel: +886 4 7116 325Fax: +886 4 7114 869E-mail: [email protected]


Omnitech International, Inc.5050 Osage Street, Suite 500DenverCO 80221USATel: +1 303 425 5083Fax: +1 303 420 1459E-mail: [email protected]: www.omnitechinternational.com

Rainer Naroska Engineering GmbHPlatanenstrasse 732108 Bad SalzuflenGermanyTel: +49 5261 6606 0Fax: +49 5261 6606 30E-mail: [email protected]: www.naroska.com

Roeslein & Associates Inc9200 Watson Road, Suite 200St LouisMO 63126-1528USATel: +1 314 729 0055Fax: +1 314 729 0070E-mail: [email protected]: www.roeslein.com

Complete Can Making Lines (Two-Piece) - Used

Container Fabrication Machinery2216 E Miner AvenueStocktonCA 95205, USATel: +1 209 469 7384Fax: +1 209 469 4826E-mail: [email protected]: www.canmaking.net

MEL, Second Hand Canmaking Machinery Poligono Industrial El SequeroAvda del Ebro, 22 26150 Agoncillo - La Rioja, Spain Tel: +34 609 448282 Fax: +34 941 431144 E-mail: [email protected] Web: www.mel.es

Complete End-Making Lines

Gebruder Leonhardt GmbH & Co KGBlema KircheisErdmann-Kircheis-Strasse 13-15D-08280 AueGermanyTel: +49 3771 278 221Fax: +49 3771 278 241E-mail: [email protected]: www.blema.de


Web: www.cevolani.it



Shin-I Machinery Works Co Ltd No 43 Chung Cheng St, Chingshui TaichungTaiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com.


Complete End-Making Lines – Used

Container Fabrication Machinery2216 E Miner AvenueStocktonCA 95205,USATel: +1 209 469 7384Fax: +1 209 469 4826E-mail: [email protected]: www.canmaking.net



Buyers guideTo advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected]

Complete End-Making Lines – Used


Compound Driers

Worldwide Headquarters:International Thermal Systems LLC4697 W Greenfield AvenueMilwaukee, WI 53214USATel: +1 414 672 7700Fax: +1 414 672 8800E-mail: [email protected] Web: www.itsllcusa.com

European Office:International Thermal Systems Ltd11 Ham Common, RichmondLondon TW10 7JB, UKTel: +44 7900 191 352E-mail: [email protected]

Asian Office:ITS Industrial Thermal Equipment Co LtdTel: +86 21 6774 1033Fax: +86 21 6774 2860E-mail: [email protected]

Compound Lining Equipment

CarnaudMetalbox Engineering plcDockfield Road, ShipleyW Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com

World HeadquartersGrace Darex Packaging TW.R. Grace & Co - Conn.7500 Grace DriveColumbiaMO 21044USATel: +1 410 531 4000Fax: +1 410 531 4367



Asia Pacific W.R. Grace (Hong Kong) Ltd1010 Huai Hai ZhongShanghai 200031, ChinaTel: +86 2154678

EuropeGrace GmbH & Co. KGIn der Hollerecke 167547 WormsGermanyTel: +49 6241 403.00Fax: +49 6241 403 1211

Container Presses

HEILBRONN Container Presses LtdWannenäckerstr 3674078 HeilbronnGermanyTel.: +49 7131 296 82Fax: +49 7131 296 64E-mail: [email protected] Web: www.heilbronn-container.com

Container Sealing Compounds

World HeadquartersGrace Darex Packaging TW.R. Grace & Co - Conn.7500 Grace Drive, ColumbiaMO 21044, USATel: +1 410 531 4000Fax: +1 410 531 4367




EuropeGrace GmbH & Co. KGIn der Hollerecke 167547 Worms, GermanyTel: +49 6241 403.00Fax: +49 6241 403 1211 Conveyors: Magnetic

Bunting Magnetics Co500 S Spencer AvenuePO Box 468Newton, KS 67114-0468USATel: +1 316 284 2020Fax: +1 316 283 4975E-mail: [email protected]: www.buntingmagnetics.com

Goudsmit Magnetic Systems B.V.PO Box 18, Petunialaan 19NL-5580 AA WaalreThe NetherlandsTel: +31 40221 3283Fax: +31 40221 7325E-mail: [email protected]: www.goudsmit-magnetics.nl

Conveyors: Plastic Belting & Chain

Ashworth Bros, Inc 450 Armour DaleWinchester, VA 22601, USA Tel: +1 540 662 3494Fax: +1 540 662 3150E-mail: [email protected]: www.ashworth.com

Habasit AGRoemerstrasse 1CH-4153 Reinach-BaselSwitzerlandTel: +41 61 715 1515Fax: +41 61 715 1555E-mail: [email protected]: www.habasit.com

Intralox LLC USA201 Laitram LaneHarahan, LA 70123, USAToll free: 1 888 414 2358Web: www.intralox.com(additional free phone numbers available on the internet)

Convolute & Round Cupping Tools

Wallram GmbHKaninenberghoehe 5045136 Essen GermanyTel: +49 201 89636 660Fax: +49 201 89 63 630E-mail: [email protected] Web: www.wallram.de

Cupper Die Sets

Standard Engineering Group, Inc3394 Miller Park Road, Suite 100Akron, Ohio 44312USATel: +1 330 896 4700Fax: +1 330 896 4701Web: www.standardengineering-group.com

TG Can Technology Ltd34 Burners Lane, Kiln FarmMilton Keynes MK11 3HB, UKTel: +44 1908 561 444Fax: +44 1908 307 519E-mail: [email protected]

Curler Tooling

Apex Tool Works Inc3200 Tollview DriveRolling MeadowsIL 60008USATel: +1 847 394 5810 Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com

D&I Can Making Lubricants

North America: Henkel Technologies, Metal Packaging Group32100 Stephenson HighwayMadison Heights, MI 48071, USATel: +1 800 521 6895Fax: +1 248 588 0486Web: www.henkel.usE-mail: [email protected]: Emily Mullins or Eric Slamans






Europe: Henkel Technologies, Metal Packaging GroupHenkelstrasse 67D-40191 Düsseldorf, GermanyTel: +31 653 286 030Fax: +49 211 798 189 80E-mail: [email protected]: Tom KleinschmidtAsia Pacific: Henkel (China) Co Ltd, Beijing OfficeRm 905, Hyundai Motor Tower, #38 Xiaoyun Road, Chaoyang District, Beijing 100027, PR ChinaTel: +86 10 8453 8686Fax: +86 10 8453 8198E-mail: [email protected]: Gao BingSouth America: Henkel Ltda, Metal Packaging GroupRua Karl Huller 136, Jd Canhema,09941-410 Diadema, Sao Paulo, BrazilTel: +55 11 3205 8955Fax: +55 11 3205 8722 Web: www.henkel.com.brE-mail: [email protected]: Marcelo Cardaci or Ronaldo Gerloff

D&I Can Tooling

QUALITY &RELIABILITY

International Container SupplyCustomer Service – USA7333 Paragon Road, St 100Centerville, OH 45459, USATel: +1 937 291 0228Fax: +1 937 291 0236E-mail: [email protected]: www.icscangroup.net

Customer Service – China Tel: +86 137 05 288211E-mail: [email protected]

Customer Service – MexicoTel: +52 5555 779087E-mail: [email protected]

Customer Service – ThailandTel: +66 86 558 3033E-mail: [email protected]

Lieb Precision Tool, Inc1225 Aeroplaza Drive, Colorado SpringsCO 80916, USATel: +1 719 637 8713Fax: +1 719 596 3019Operation Manager: Mike SimonsonE-mail: [email protected] [email protected]: www.liebpt.com

Sandvik Hard Materials Sandvik Española SAHard Materials Division, Pol. Ind. Roca C/ Verneda, s/n 08107 Martorelles (Barcelona), Spain Tel: +34 93 571 7500 Fax: +34 93 571 7650E-mail: [email protected]: www.hardmaterials.sandvik.com

TG Can Technology Ltd34 Burners Lane, Kiln FarmMilton Keynes MK11 3HB, UKTel: +44 1908 561 444Fax: +44 1908 307 519 E-mail: [email protected]

Wallram GmbHKaninenberghoehe 5045136 Essen, GermanyTel: +49 201 89636 660Fax: +49 201 89 63 630E-mail: [email protected] Web: www.wallram.de

D&I Cup Tooling


International Container SupplyCustomer Service – USA7333 Paragon Road, St 100CentervilleOH 45459, USATel: +1 937 291 0228Fax: +1 937 291 0236E-mail: [email protected]: www.icscangroup.netCustomer Service – China Tel: +86 137 05 288211E-mail: [email protected] Service – MexicoTel: +52 5555 779087E-mail: [email protected] Service – ThailandTel: +66 86 558 3033E-mail: [email protected]


Domers/Bottom Formers

Pride Engineering, Inc9401 73rd Avenue North, Suite 200Brooklyn ParkMN 55428, USA Tel: +1 763 427 6250Fax: +1 763 427 6226E-mail: [email protected]

Domers & Dome Stations

CarnaudMetalbox Engineering plcDockfield Road, ShipleyWest Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com

Double Sheet Detection

Prime Controls, Inc4551 Gateway CircleDaytonOhio 45440-1711, USA Tel: +1 866 435 8659Fax: +1 937 435 2091E-mail: [email protected]: www.primecontrols.com

DRD Can Making Equipment


Shin-I Machinery Works Co Ltd No 43 Chung Cheng St , Chingshui Taichung , Taiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com

Wallram GmbHKaninenberghoehe 5045136 EssenGermanyTel: +49 201 89636 660Fax: +49 201 89 63 630E-mail: [email protected] Web: www.wallram.de

Drum & Pail Manufacturing Equip.

Yuan Rox Machinery Co LtdNo 69 Lane 22Sec 1 Hsin Jen Rd, Tai-Ping CityTaichung 411Taiwan ROC Tel: +886 4 227 550 11 Fax: +886 4 227 544 64 E-mail: [email protected] Web: www.yuanrox.com

Drying Ovens



KBA-MetalPrint GmbHWernerstr. 119-129D-70435 StuttgartGermanyTel: +49 71169971-0Fax: +49 711 69971-670E-mail: [email protected]: www.kba-metalprint.de



To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected] Buyers guideDrying Ovens


sellacan Industrieofen GmbHDaimlerstr 12D-32791 LageGermanyTel: +49 5232 69900Fax: +49 5232 699028E-mail: [email protected]: www.sellacan.de

Easy Open End Manufacturing Machinery

DRT Mfg. Co.618 Greenmount BlvdDaytonOH 45419, USATel: +1 937 298 7391Fax: +1 937 298 7190E-mail: [email protected]: www.drtmfgco.com

SLAC Precision Equipment (Suzhou) Inc628 Shixu RoadWuzhong District Cangshu Develop Zone, SuzhouChina 215156Tel: +86 512 662 48 533Fax: +86 512 662 48 020E-mail: [email protected]: www.slac.cn


Easy Open Ends

DivFood – A Division of Nampak Metal Packaging Limited25 Richard Carte RoadMobeni, Kwazulu-NatalSouth AfricaTel: +27 31 450 5874Fax: +27 31 450 5882E-mail: [email protected]: www.nampak.com

Envases Universales de México SA de CVCalzada de Guadalupe 504Col. Centro de Cuautitlán (Estado de México)54758 MéxicoTel: +52 55 58 994 900Fax: +52 55 58 702 020E-mail: [email protected]: www.envasesuniversales.com

Gilpin and Company, Inc2014 Springhill Court, BirminghamAL 35242, USATel: +1 631 251 6736Fax: +1 631 251 6736E-mail: [email protected]: www.gilpinezo.com

Global Ends SAPoligono Industrial de CeutiC /Rio Mundo 3E-30562 Ceuti (Murcia)SpainTel: +34 968 687 840Fax: +34 968 687 684E-mail: [email protected]: www.globalends.com

MIVISA Envases SAUPoligono Industrial Los Pinos30565 Las Torres de CotillasMurciaSpainTel:+34 968 364400Fax: +34 968 364442E-mail: [email protected]: www.mivisa.com

Sonoco Phoenix Inc3075 Brookline RoadNorth CantonOH 44720USATel: +1 3302442312Fax: +1 330 966 7744E-mail: [email protected]

Easy Open End Repair Coat System

www.gracedarex.com World HeadquartersGrace Darex Packaging TW.R. Grace & Co - Conn.7500 Grace Drive, ColumbiaMO 21044, USATel: +1 410 531 4000Fax: +1 410 531 4367





Easy Open End Testing Equipment


Easy Open & Peel-off Membrane Ends

Parliament International LtdSheridan House17 St Ann’s Road, HarrowMiddlesex HA1 1JU, UKTel: +44 20 8861 3505Fax: +44 20 8861 2025E-mail: [email protected]: www.parliament-group.co.uk

End Bags, Kraft

Stonehouse Paper & Bag Mills LtdLower Mills, StonehouseGlos GL10 2BD, UKTel: +44 1453 822173Fax: +44 1453 822174E-mail: [email protected]

End Compound Liners

www.gracedarex.com World HeadquartersGrace Darex Packaging W.R. Grace & Co - Conn.7500 Grace Drive, ColumbiaMO 21044, USATel: +1 410 531 4000Fax: +1 410 531 4367North America 62 Whittemore AveCambridge, MA 02140, USATel: +1 617 498 4987Fax: +1 617 498 4433



EuropeGrace GmbH & Co. KGIn der Hollerecke 167547 Worms, GermanyTel: +49 6241 403.00Fax: +49 6241 403 1211






End Line Balancers & Balancer Trays

Clevertech Industrial AutomationVia Brodolini 18/A42020 Cadelbosco (RE)ItalyTel: +39 0522 911 330Fax: +39 0522 911 201E-mail: [email protected]: www.clevertech.it

End Roll Palletizers & Depalletizers


INEMUR - Ingenieria Electromecanica MurcianaPoligono Industrial El CortijoC/Esmeralda S/N30560 Alguazas, MurciaSpainTel: +34 968 38 8038Fax: +34 968 38 8040E-mail: [email protected]: www.inemur.com

End & Tab Conversion Tooling

DRT Mfg. Co.618 Greenmount BlvdDaytonOH 45419USATel: +1 937 298 7391Fax: +1 937 298 7190E-mail: [email protected]: www.drtmfgco.com

DRT GmbH & Co KGHansestrasse 49D-38112 BraunschweigGermanyTel: +49 531 231 620Fax: +49 531 231 6244E-mail: [email protected]: www.drt-europe.de

Adena Tool Corporation4201 Little York RoadDayton, OH 45414USATel: +1 937 890 8428Fax: +1 937 890 0723E-mail: [email protected]: www.adenatool.com


International Container SupplyCustomer Service – USA7333 Paragon Road, St 100CentervilleOH 45459, USATel: +1 937 291 0228Fax: +1 937 291 0236E-mail: [email protected]: www.icscangroup.netCustomer Service – China Tel: +86 137 05 288211E-mail: [email protected] Service – MexicoTel: +52 5555 779087E-mail: [email protected] Service – ThailandTel: +66 86 558 3033E-mail: [email protected]

Micromec SrlVia Palermo 3720090 Assago (MI), ItalyTel: +39 02 488 8611Fax: +39 02 488 86133E-mail: [email protected]: www.micromec.com

End Testing Equipment

CMC-KUHNKE, Inc250 Falls Road, HudsonNew York 12534, USATel: +1 518 828 9345Fax: +1 518 828 8580E-mail: [email protected]: www.cmc-kuhnke.com

CMC-KUHNKE, GmbHColditzstr. 34-36, Bau 18D-12099 Berlin, GermanyTel: +49 30 2300 660Fax: +49 30 2300 6666E-mail: [email protected]: www.cmc-kuhnke.com

METOP ABQUALITY CONTROL

METOP AB Ringugnsgatan 1021616 LimhamnSweden Tel: +46 40 163235Fax: +46 40 164770E-mail: [email protected]: www.metop.com

Ovec Systems Ltd8 Aberdeen RoadChapelhall Industrial EstateAirdrie ML6 8QH, ScotlandTel: +44 1236 770699Fax: +44 1236 770898E-mail: [email protected] Web: www.ovec.co.uk

End Wrapping/Unwrapping


CSW Machinery BVRigastraat 167418 EW DeventerP.O. Box 810, 7400 AV DeventerThe Netherlands Tel: +31 570 678 700Fax: +31 570 633 985E-mail: [email protected]

INEMUR - Ingenieria Electromecanica MurcianaPoligono Industrial El CortijoC/Esmeralda S/N, 30560 AlguazasMurciaSpainTel: +34 968 38 8038Fax: +34 968 38 8040E-mail: [email protected]: www.inemur.com

Engineering & Installation Services

OKL Can Line Inc11235 Sebring Drive,CincinnatiOH 45240, USATel: +1 513 825 1655Fax: +1 513 825 1948E-mail: [email protected]: www.oklcan.com

Omnitech International Inc6355 Ward Road, Suite 400Arvada CO 80004 - 3823, USATel: +1 303 425 5083Fax: +1 303 420 1459E-mail: [email protected]

Roeslein & Associates Inc9200 Watson Road, Suite 200St LouisMO 63126-1528USATel: +1 314 729 0055Fax: +1 314 729 0070E-mail: [email protected]: www.roeslein.com

Flanging Machines

Belvac Production Machinery Inc237 Graves Mill RoadLynchburgVA 24502-4203USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com




To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected] Buyers guide Flanging Machines


Induction Curing & Drying Systems

Sprimag Spritzmaschinenbau GmbH & Co KGHenriettenstrasse 9073230 Kirchheim/TeckGermanyTel: +49 7021 5790Fax: +49 7021 417 60E-mail: [email protected]: www.sprimag.de

Inside Spray Control

Sencon




Inside/Outside Spray Machines

Sprimag Spritzmaschinenbau GmbH & Co KGHenriettenstrasse 9073230 Kirchheim/TeckGermanyTel: +49 7021 5790Fax: +49 7021 417 60E-mail: [email protected]: www.sprimag.de

Inspection Systems

ALTEK Company245 East Elm StreetPO Box 1128CT 06790, USATel: +1 860 482 7628Fax: +1 860 496 0255E-mail: [email protected]: www.altekcompany.com

Applied Vision Corporation2020 Vision Lane, AkronOH 44223, USATel: +1 330 926 2222Fax: +1 330 926 2250E-mail: [email protected]: www.appliedvision.com


CMC-KUHNKE, Inc250 Falls RoadHudsonNew York 12534, USATel: +1 518 828 9345Fax: +1 518 828 8580E-mail: [email protected]: www.cmc-kuhnke.comCMC-KUHNKE, GmbHColditzstr. 34-36, Bau 18D-12099 Berlin, GermanyTel: +49 30 2300 660Fax: +49 30 2300 6666E-mail: [email protected]: www.cmc-kuhnke.com

ibea GmbHKleine Bahnstrasse 8D-22525 HamburgGermanyTel: +49 40 6898 870Fax: +49 40 6898 8729E-mail: [email protected]: www.ibea.de

OneVision Corporation5805A Chandler CourtWestervilleOH 43082, USATel: +1 614 794 1144Fax: +1 614 794 3366E-mail: [email protected]: www.onevisioncorp.com

Pressco Technology Inc29200 Aurora RoadClevelandOH 44124, USATel: +1 440 498 2600Fax: +1 440 498 2615E-mail: [email protected]: www.pressco.com

QUISS GmbHLilienthalstrasse 582178 PuchheimGermanyTel: +49 89 894 590Fax: +49 89 894 59111E-mail: [email protected]: www.quiss.com

Sencon

Web: www.sencon.comNorth & South AmericaTel: +1 708 496 3100E-mail: [email protected] – Middle East – AsiaTel: +44 1905 755525E-mail: [email protected] – Spain – GermanyTel: +33 499 133 720E-mail: [email protected]

Laminating on Metal Sheets


Leak Detection


Wilco AGRigackerstr 11CH-5610 WohlenSwitzerlandTel: + 41 56 618 4343Fax: +41 56 618 4344E-mail: [email protected]: www.wilco.com

Yuan Rox Machinery Co LtdNo 69 Lane 22Sec 1 Hsin Jen RdTai-Ping CityTaichung 411Taiwan ROC Tel: +886 4 227 550 11 Fax: +886 4 227 544 64 E-mail: [email protected] Web: www.yuanrox.com

Leak Testers

ibea GmbHKleine Bahnstrasse 8D-22525 HamburgGermanyTel: +49 40 6898 870Fax: +49 40 6898 8729E-mail: [email protected]: www.ibea.de

InnoScan K/SSødalsparken 118220 BrabrandDenmarkTel +45 86 26 5677Fax +45 86 26 5678E-mail: [email protected]: www.innoscan.dk






Sencon




Light Testers

Belvac Production Machinery Inc237 Graves Mill Road , LynchburgVA 24502-4203USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com

SenconWeb: www.sencon.comNorth & South AmericaTel: +1 708 496 3100E-mail: [email protected]



Line Installation & Maintenance

Littell International, Inc1211 Tower RoadSchaumburgIL 60173USATel: +1 630 622 4700Fax: +1 630 622 4747E-mail: [email protected]: www.littell.com

Lubrication Technology

Chemtool IncorporatedContainer Technology Group8200 Ridgefield Road, PO Box 538Crystal LakeIL 60039-0538, USACall Today! Bob Mack or Mike WintersTel: +1 815 459 1250Fax: +1 815 459 1955E-mail: [email protected] Web: www.chemtool.com/ctg

Lug Cap Manufacturing Lines

Apex Tool Works Inc3200 Tollview DriveRolling Meadows, IL 60008, USATel: +1 847 394 5810 Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com


Rainer Naroska Engineering GmbHPlatanenstrasse 732108 Bad Salzuflen GermanyTel: +49 5261 6606 0Fax: +49 5261 6606 30E-mail: [email protected]: www.naroska.com


Shin-I Machinery Works Co Ltd No 43 Chung Cheng St ChingshuiTaichungTaiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com

Magnetic Decorator Cylinders

Bunting Magnetics Co500 S. Spencer AvenuePO Box 468NewtonKS 67114-0468USATel: +1 316 284 2020Fax: +1 316 283 4975E-mail: [email protected]: www.buntingmagnetics.com

T. D. Wright Inc292 Walnut StreetSt PaulMN 55102USATel: +1 651 227 1302Fax: +1 651 227 4465E-mail: [email protected]: www.tdwright.com

Metal Decorating Equipment

Crabtree of Gateshead LtdKingswayTeam Valley Trading EstateGatesheadTyne & Wear NE11 0SU, UKTel: +44 191 487 5071Fax: +44 191 487 3997E-mail: [email protected]: www.crabpress.co.uk



Metal Decorating Equipment (Hoe Printing Press)

Perm Machine & Tool CoPO Box 6609660 Industrial Drive, St JohnIndiana 46373, USATel: +1 219 365 5000Fax: +1 219 365 4847E-mail: [email protected]: www.permmachine.com

Metal Decorating Inks & Coatings (Speciality)

Chromatic Technologies, Inc4870 Centennial Blvd. Ste. 126Colorado SpringsCO 80919USATel: +1 719 592 1557Fax: +1 719 592 1455E-mail: [email protected] Web: www.ctiinks.com

Metal Decorating Inks & Coatings

DIC Coatings – SpainPoligono Ind El Campillo 11Parcela 548500 Gallarta Vizcaya, SpainTel: +34 946 361 999Fax: +34 946 363 451E-mail: [email protected] Web: www.diccoatings.com

DIC Coatings – UKUnit 10, Hermes RoadGillmoss Industrial EstateLiverpool L11 0ED, UKTel: +44 151 548 1134Fax: +44 151 548 0649E-mail: [email protected]: www.diccoatings.com

DIC Coatings – Japan5-58 Sakashita 3-chomeItabashi-ku, Tokyo 174-8520, Japan



To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected]

Buyers guideE-mail: dic-chemicoat@ mc.dic.co.jpWeb: www.diccoatings.comSun Chemical Zao, RussiaAeroportovskaya Street 14140150, BykovoRamenski Area, Moscow RegionRussiaTel: +7 495 933 13 03Fax: +7 495 933 13 09Sun Chemical do Brasil LtdaAvda Justino de Maio, 140Guarulhos, Sao Paulo 07222-000BrazilTel: +55 11 6462 2500Fax: +55 11 6462 2527Sun Chemical Mexico SA de CVAlce Blanco No 20 Esq Calle 9 Col. Sta María Nativitas53370 Naucalpan de Juárez, Edo. De MéxicoMéxicoTel: +55 5333 2200Fax: +55 5373 4705PT DIC GraphicsJL. Rawagelam III Blok II L. Kav 8-9Kawasan Ind. Pulogadung Jakarta13012 IndonesiaTel: +62 21 461 3525Fax: +62 21 461 3524Dainippon Ink & Chemicals (Thailand) Co LtdWijan, 159 Sammit Bldg., 21 Soi Asok, Sukhumvit 21 RdNorth Klong Toei, WattanaBangkok 10110ThailandTel: +66 2 260 6630 7Fax: +66 2 260 6641 2 Shanghai DIC Ink Co Ltd (Shanghai DIC)3888 HuMing Road201108 ShanghaiChinaTel: +86 21 64890888Fax: +86 21 64895842

INX International Ink Co. 10820 Withers Cove Park DriveCharlotteNC 28278, USA Tel: +1 704 372 2080Fax: +1 704 372 2087E-mail: [email protected]: www.inxinternational.com

Headquarters LINDGENS Metal Decorating Coating & Inks ABBox 743, SE- 251 07 Helsingborg, SwedenTel: +46 42 10 88 00 Fax: +42 18 08 34E-mail: [email protected]: www.lindgens.comLINDGENS MDC&I GmbHCarl-Leverkus Strasse 20,DE-40764 Langenfeldt, GermanyTel: +49 2173 26944 0 Fax: +492173 26944 10E-mail: [email protected] MDC&IUnit 204 Anglesey Business Park Littleworth Road, HednesfordStaffordshireWS12 1NR, United KingdomTel: +44 1543 87 70 70 Fax: +44 1543 87 70 71E-mail: [email protected] LINDGENS MDC&I / US PartnerAlden & Ott Printing Inks616 East Brook Drive, 60005 Arlington Heights, IL, USATel: +1 847 956 6830 Fax: +1 847 956 6509E-mail: [email protected] LINDGENS MDC&I / Server Boya A.S.Istanbul Tuzla Kimya Sanayicileri, Organize Sanayi Bölgesi, Kristal Sok. No. 4, 34956 Tuzla, Istanbul, TurkeyTel: +90 216 593 10 30 Fax: +90 216 593 22 35E-mail: [email protected] MDC&I3 p/o, 59a, office 423140003 Moscow reg, Lubercy, RussiaTel: +7 495 983 34 84Fax: +7 495 983 34 84E-mail: [email protected]

Necker Tooling

Lieb Precision Tool, Inc1225 Aeroplaza DriveColorado SpringsCO 80916, USATel: +1 719 637 8713Fax: +1 719 596 3019Operation Manager: Mike SimonsonE-mail: [email protected] [email protected]: www.liebpt.com


Necking Machines

Belvac Production Machinery Inc237 Graves Mill Road Lynchburg, VA 24502-4203, USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com

CarnaudMetalbox Engineering plcDockfield Road, Shipley, W Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com



Oven Loggers

SenconWeb: www.sencon.comNorth & South AmericaTel: +1 708 496 3100E-mail: [email protected] – Middle East – AsiaTel: +44 1905 755525E-mail: [email protected] – Spain – GermanyTel: +33 499 133 720E-mail: [email protected]

Ovens, Oxidizers and Incinerators

ES&TEnvironmental Services & Technologies Inc. Headquarters4941 41st Street CourtMoline, IL 61265USATel: +1 309 762 9551Fax: +1 309 762 9561E-mail: [email protected]: www.envsrv.com

Palletizing Equipment

Goudsmit Magnetic Systems B.V.PO Box 18, Petunialaan 19NL-5580 AA WaalreThe NetherlandsTel: +31 40221 3283Fax: +31 40221 7325E-mail: [email protected]: www.goudsmit-magnetics.nl

Palletizers/Depalletizers & Pallet Conveying

Busse/SJI Corporation124 N Columbus StreetRandolph, WI 53956, USATel: +1 920 326 3131Fax: +1 920 326 3134E-mail: [email protected]: www.arrowheadsystems.com


Eclipse Magnetics LtdUnits 1-4 Vulcan RoadSheffield S9 1EWUKTel: +44 114 2250 538Fax: +44 114 2250 610E-mail: [email protected]: www.eclipse-magnetics.co.uk






Goudsmit Magnetic Systems B.V.PO Box 18Petunialaan 19NL-5580 AA WaalreThe NetherlandsTel: +31 40221 3283Fax: +31 40221 7325E-mail: [email protected]: www.goudsmit-magnetics.nl

INEMUR - Ingenieria Electromecanica MurcianaPoligono Industrial El CortijoC/Esmeralda S/N30560 AlguazasMurcia, SpainTel: +34 968 38 8038Fax: +34 968 38 8040E-mail: [email protected]: www.inemur.com

Parting Machines


Parts for Canmakers

OKL Can Line Inc11235 Sebring DriveCincinnatiOH 45240, USATel: +1 513 825 1655Fax: +1 513 825 1948E-mail: [email protected]: www.oklcan.com

Peelable Membrane Ends

O. Kleiner AG - Flexible PackagingSchützenmattweg 26CH-5610 Wohlen, SwitzerlandTel.: +41 56 618 47 00Fax: +41 56 618 47 01E-mail: [email protected]: www.okleiner.chWeb: www.canpeel.com

Peelable Membrane Ends Machinery

Soudronic AGIndustriestrasse 35CH-8962 Bergdietikon, SwitzerlandTel: +41 44 743 66 66 Fax: +41 44 743 66 99E-mail: [email protected]: www.soudronic.com

Rainer Naroska Engineering GmbHPlatanenstrasse 732108 Bad Salzuflen, GermanyTel: +49 5261 6606 0Fax: +49 5261 6606 30E-mail: [email protected]: www.naroska.com

Peel Off Aluminium Membrane Ends

DivFoodA Division of Nampak Metal Packaging 25 Richard Carte RoadMobeni, Kwazulu-NatalSouth AfricaTel: +27 31 450 5874Fax: +27 31 450 5882E-mail: [email protected]: www.nampak.com

Peel Off Ends

MIVISA Envases SAUPoligono Industrial Los Pinos30565 Las Torres de CotillasMurcia, SpainTel:+34 968 364400Fax: +34 968 364442E-mail: [email protected]: www.mivisa.com

Peel Off Membrane Ends

Gilpin and Company, Inc2014 Springhill CourtBirminghamAL 35242, USATel: +1 631 251 6736Fax: +1 631 251 6736E-mail: [email protected]: www.gilpinezo.com

Powder/Lacquer Weld Seam Protection Systems and Gas Curers

Frei AGHofenstrasse 18CH-9300 WittenbachSwitzerlandTel: +41 71 292 3434Fax: +41 71 292 3400E-mail: [email protected]: www.frei-ag.com

Yuan Rox Machinery Co LtdNo 69 Lane 22, Sec 1 Hsin Jen RdTai-Ping CityTaichung 411Taiwan ROC Tel: +886 4 227 550 11 Fax: +886 4 227 544 64 E-mail: [email protected] Web: www.yuanrox.com

Refurbished Equipment

www.gracedarex.com World HeadquartersGrace Darex Packaging TW.R. Grace & Co - Conn.7500 Grace DriveColumbiaMO 21044, USATel: +1 410 531 4000Fax: +1 410 531 4367

North America 62 Whittemore AveCambridgeMA 02140, USATel: +1 617 498 4987Fax: +1 617 498 4433


Asia Pacific W.R. Grace (Hong Kong) Ltd1010 Huai Hai ZhongShanghai 200031ChinaTel: +86 2154678


UnimaQ LtdUnit 2, Pinfold LaneLlay South Industrial EstateLlayWrexham LL12 0PX, UKTel: +44 1978 855 558Fax: +44 1978 855 573Mobile: (+44) 7720 468 309E-mail: [email protected]: www.unimaq.co.uk

Scores & Embossing Tooling


International Container SupplyCustomer Service – USA7333 Paragon Road, St 100CentervilleOH 45459, USATel: +1 937 291 0228Fax: +1 937 291 0236E-mail: [email protected]: www.icscangroup.net

Customer Service – China Tel: +86 137 05 288211E-mail: [email protected]

Customer Service – MexicoTel: +52 5555 779087E-mail: [email protected] Service – ThailandTel: +66 86 558 3033E-mail: [email protected]

Micromec SrlVia Palermo 3720090 Assago (MI)ItalyTel: +39 02 488 8611Fax: +39 02 488 86133E-mail: [email protected]: www.micromec.com

Scroll Dies

Apex Tool Works Inc3200 Tollview DriveRolling MeadowsIL 60008USATel: +1 847 394 5810 Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com



To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected] Buyers guide

Scroll Dies

Micromec SrlVia Palermo 3720090 Assago (MI), ItalyTel: +39 02 488 8611Fax: +39 02 488 86133E-mail: [email protected]: www.micromec.com

Zhejiang Hengli Shearing Machinery Co, Ltd9 Huishan Road, Mogan Mountain Economic Development Zone,Deqing, Zhejiang ProvinceChina 313200Tel: +86 572 8832016 +86 572 8832000Fax: +86 572 8832222 E-mail: [email protected]: www.hangzhouhengli.en. alibaba.com

Scroll Shears/Press Automation

Clevertech Industrial AutomationVia Brodolini 18/A42020 Cadelbosco (RE), ItalyTel: +39 0522 911 330Fax: +39 0522 911 201E-mail: [email protected]: www.clevertech.it

Sealing Compounds

Foreco SRLVia Kennedy 7520010 Marcallo con CasoneMilan, ItalyTel: +39 02 976 1939Fax: +39 02 972 53021E-mail: [email protected]: www.foreco.it

www.gracedarex.com World HeadquartersGrace Darex Packaging TW.R. Grace & Co - Conn.7500 Grace Drive, ColumbiaMO 21044, USATel: +1 410 531 4000Fax: +1 410 531 4367





Seaming Chucks & Rolls


IMETA srlStrada Burla 279A43100 ParmaItalyTel: +39 0521 211411Fax: +39 0521 211419E-mail: [email protected]: www.imetasrl.com

Seaming Machines

Ferrum LtdBahnstrasse 18CH-5102 RupperswilSwitzerlandTel: +41 62 889 1311Fax: +41 62 889 1310E-mail: [email protected]: www.ferrum.ch

FMC Technologies NVBreedstraat 3B-9100 Sint-NiklaasBelgiumTel: +32 3 780 1211Fax: +32 3 777 7955

US Office: 2300 Industrial Avenue Box AMadera, CA 93639, USATel: +1 559 661 3200Fax: +1559 661 3156

Hong Kong Office:Room 1402, Ming An PlazaPhase 1, 8 Sunning Road,Causeway BayHong KongTel: +852 2808 4624Fax: +852 2576 3801E-mail : [email protected]: www.fmcfoodtech.com

Hor Yang Machinery Industries Co LtdNo. 48, Sing Gong RdChuansing Industrial ParkShen Gang TownshipChang Hua County50971, TaiwanTel: +886 4799 1567Fax: +886 4799 1509E-mail: [email protected]: www.horyang.com


Montajes Conserveros De Galicia (MCG)Polígono Industrial Rebullón, Nave 10PO Box 109236416 Mos-Vigo (Pontevedra), SpainTel: +34 986 26 61 46Fax: +34 986 48 71 35Contact: +34 629 877 051E-mail: [email protected]: www.mcg.com.es

Sargiani SpAVia Farnesiana 8429100 Piacenza, ItalyTel: +39 0523 615 250Fax: +39 0523 593 938E-mail: [email protected]: www.sargiani.com

Sommetrade SLParque Tecnologico de Zamudio -Edificio 30148170 Zamudio (Vizcaya), SpainTel: +34 94 431 8611Fax: +34 94 431 8200E-mail: [email protected]: www.sommetrade.com

Sensor Technology

Sencon

Web: www.sencon.comNorth & South AmericaTel: +1 708 496 3100E-mail: [email protected] – Middle East – AsiaTel: +44 1905 755525E-mail: [email protected] – Spain – GermanyTel: +33 499 133 720E-mail: [email protected]

Sheet Coating Control

SenconWeb: www.sencon.comNorth & South AmericaTel: +1 708 496 3100E-mail: [email protected] – Middle East – AsiaTel: +44 1905 755525E-mail: [email protected] – Spain – GermanyTel: +33 499 133 720E-mail: [email protected]

Sheet Feed Presses








Sankyo America IncPO Box 433810655 State Route 47Sidney, OH 45365-4338, USATel: +1 937 498 4901Fax: +1 937 498 4338E-mail: [email protected]: www.sankyoamerica.com

Shin-I Machinery Works Co Ltd No 43 Chung Cheng St ChingshuiTaichung, Taiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com

Sheeting Lines

Littell International, Inc 1211 Tower RoadSchaumburgIL 60173, USATel: +1 630 622 4700Fax: +1 630 622 4747E-mail: [email protected]: www.littell.com

Zhejiang Hengli Shearing Machinery Co, Ltd9 Huishan Road , Mogan Mountain Economic Development Zone,Deqing, Zhejiang ProvinceChina 313200Tel: +86 572 8832016 +86 572 8832000Fax: +86 572 8832222 E-mail: [email protected]: www.hangzhouhengli.en.alibaba.com

Shell Tooling

Apex Tool Works Inc3200 Tollview DriveRolling MeadowsIlL 60008, USATel: +1 847 394 5810 Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com


International Container SupplyCustomer Service – USA7333 Paragon Road, St 100Centerville, OH 45459, USATel: +1 937 291 0228Fax: +1 937 291 0236E-mail: [email protected]: www.icscangroup.netCustomer Service – China Tel: +86 137 05 288211E-mail: [email protected] Service – MexicoTel: +52 5555 779087E-mail: [email protected] Service – ThailandTel: +66 86 558 3033E-mail: [email protected]

Slitter Equipment

Cepak Produzione srlVia G Galilei 23 42027 Montecchio Emilia (RE)ItalyTel: +39 0522 866 203Fax: +39 0522 866 064E-mail: [email protected]

Stretch Forming Machines


Thermal Oxidizers


Turnkey Can Making Lines

Cantec GmbH & Co KGHelenenstrasse 149D-45143 Essen, GermanyTel: +49 201 633 1461Fax: +49 201 633 1239E-mail: [email protected]: www.cantec.com

Twist Off Caps

MIVISA Envases SAUPoligono Industrial Los Pinos30565 Las Torres de CotillasMurcia, SpainTel:+34 968 364400Fax: +34 968 364442E-mail: [email protected]: www.mivisa.com

Used/Refurbished End Equipment

MEL, Second Hand Canmaking Machinery Poligono Industrial El SequeroAvda del Ebro, 22 26150 Agoncillo - La Rioja Spain Tel: +34 609 448282 Fax: +34 941 431144 E-mail: [email protected] Web: www.mel.es

Stuurman BVPO Box 35 1520 AA WormerveerThe NetherlandsTel: +31 75 6283551Fax: +31 75 6286037E-mail: [email protected]: www.stuurmanbv.com

Used/Refurbished Equipment

Can Making Solutions SLCorredera San Marcos 37 3oB23700 Linares (Jaén)SpainTel: +34 953 606 375Fax: +34 953 691 857 E-mail: [email protected]

Web: www.canmakingsolutions.com

Cazander Bros. & Sis. BVRing 403241 CR MiddelharnisThe NetherlandsTel: +31 187 471000Fax: +31 187 471005E-mail: [email protected] Address:Kaagstraat 5b8102 GZ RaalteThe Netherlands

Container Fabrication Machinery2216 E Miner AvenueStocktonCA 95205, USATel: +1 209 469 7384Fax: +1 209 469 4826E-mail: [email protected]: www.canmaking.net

Lacueva Can Making Machinery S.L.Pol.industrial El RoturoParcela 1, 26511 El Villar De Arnedo La Rioja, SpainTel: +34 941 130918Fax: +34 941 135113E-mail: [email protected] Web: www.maquinarialacueva.com


OKL Can Line Inc11235 Sebring DriveCincinnati,OH 45240USATel: +1 513 825 1655Fax: +1 513 825 1948E-mail: [email protected]: www.oklcan.com



To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203Email: [email protected] Buyers guide Used/Refurbished Equipment

Stuurman BVPO Box 35 , 1520 AA Wormerveer,The NetherlandsTel: +31 75 6283551Fax: +31 75 6286037E-mail: [email protected]: www.stuurmanbv.com

Used/Refurbished Metal Decorating Equipment

Brodie System, Inc 1539 West Elizabeth AveLinden, NJ 07036USATel: +1 908 862 8620Fax: +1 908 862 8632E-mail: [email protected]: www.brodiesystem.com



Perm Machine & Tool CoPO Box 6609660 Industrial Drive,St JohnIndiana 46373USATel: +1 219 365 5000Fax: +1 219 365 4847E-mail: [email protected]: www.permmachine.com

UV Curing Equipment

IST Metz GmbHLauterstrasse 14-18D-72622 Nürtingen, GermanyTel: +49 7022 6002 0Fax: +49 7022 6002 76E-mail: [email protected]: www.ist-uv.com

KBA-MetalPrint GmbHWernerstr. 119-129D-70435 Stuttgart, GermanyTel: +49 71169971-0Fax: +49 711 69971-670E-mail: [email protected]: www.kba-metalprint.de

Roeslein & Associates Inc9200 Watson Road, Suite 200St LouisMO 63126-1528, USATel: +1 314 729 0055Fax: +1 314 729 0070E-mail: [email protected]: www.roeslein.com

Wagner Coater Parts

Perm Machine & Tool CoPO Box 6609660 Industrial DriveSt JohnIndiana 46373, USATel: +1 219 365 5000Fax: +1 219 365 4847E-mail: [email protected]: www.permmachine.com

Washer Mats & Belts

Ashworth Bros, Inc 450 Armour DaleWinchesterVA 22601USA Tel: +1 540 662 3494Fax: +1 540 662 3150E-mail: [email protected]: www.ashworth.com

Washers for Cans


Worldwide Headquarters:International Thermal Systems LLC4697 W Greenfield AvenueMilwaukee, WI 53214, USATel: +1 414 672 7700Fax: +1 414 672 8800E-mail: [email protected] Web: www.itsllcusa.comEuropean Office:International Thermal Systems Ltd11 Ham Common, RichmondLondon TW10 7JB, UKTel: +44 7900 191 352E-mail: [email protected] Office:ITS Industrial Thermal Equipment Co LtdTel: +86 21 6774 1033Fax: +86 21 6774 2860E-mail: [email protected]

VMI EPE Holland BVGelriaweg 168161 RK Epe, The NetherlandsTel: +31 578 679 111Fax: +31 578 621 317E-mail: [email protected]: www.vmi-group.com

Welding Machines


International Container SupplyCustomer Service – USA7333 Paragon Road, St 100Centerville, OH 45459, USATel: +1 937 291 0228Fax: +1 937 291 0236E-mail: [email protected]: www.icscangroup.netCustomer Service – China Tel: +86 137 05 288211E-mail: [email protected] Service – MexicoTel: +52 5555 779087E-mail: [email protected] Service – ThailandTel: +66 86 558 3033

E-mail: [email protected]

Can Man Aktiengesellschaft Mülisacker 221CH-5705 HallwilSwitzerlandTel: +41 62 777 4440Fax: +41 62 777 4441E-mail: [email protected]: www.canman.chMember of SWISSCAN NetworkWeb: www.swisscan.net

Welding Machines for Drums & Pails


Welding Machines & Weld Seam Protection

Yuan Rox Machinery Co LtdNo 69 Lane 22, Sec 1 Hsin Jen RdTai-Ping CityTaichung 411Taiwan ROC Tel: +886 4 227 550 11 Fax: +886 4 227 544 64 E-mail: [email protected] Web: www.yuanrox.com

Wicket and Chains for Sheet Fed Ovens

Perm Machine & Tool CoPO Box 6609660 Industrial Drive, St JohnIndiana 46373, USATel: +1 219 365 5000Fax: +1 219 365 4847E-mail: [email protected]: www.permmachine.com


The Brewers of Europe is a diverse organisation, con-

sisting of brewer organisations from the EU member

states, plus Switzerland, Norway and Turkey. The Euro

zone has a diverse range of brewers and a diverse range

of problems to tackle in the brewing arena. In western

Europe, there is the issue of decreasing consumption and

production. This has deepened this year because of the

financial crisis, and has included Russia. However, we can’t

complain when compared to other sectors – our indus-

try has dropped by 1.5 to 4 per cent, depending on the

country, but this is less than other sectors

have seen.

The worst outcome so far has been

seen in Germany and the UK. The latter

has seen closures of pubs on a large scale.

The issue of a minimum price per unit,

while it has been tabled, remains a threat

in the UK. It’s not a good thing for brewers.

Other countries are also suffering, such as

the Netherlands.

Meanwhile, countries that are con-

tinuing to do well are the big export-

ers – Belgium, the Czech Republic and

Denmark. They are compensated for the

drop in domestic consumption by the

export market.

Our big challenge is working with legis-

lation on a country-by-country basis. We

try to get the various national govern-

ments to vote for the brewing sector, on

important issues such as advertising bans or limits. There is

already a complete ban on beer advertising in Sweden

and France, and this is worrying.

We also campaign against excise duties on beer. There

are around 3,000 small brewers in Europe, so excise duties

fall heavily on them. The big multinational companies can

go somewhere else, but the small brewers account for

2.6 million jobs in Europe, and excise duties discriminate

against, and are very heavily damaging for, the small and

medium-sized brewers.

We also work to provide advice on the environment for

our members – on water conservation, energy use and

other items affecting their businesses.

Overall, the outlook for brewers is good, I think. After all,

the beer sector has been going on for thousands of years

in Europe, and one-quarter of all beer produced globally

is produced in Europe. Also, the big four multinationals

all have their headquarters here – ABInBev, SABMiller,

Heineken and Carlsberg. This is a unique situation that

doesn’t exist in other sectors and we should be proud of

that.

The brewing market is changing, and that is not neces-

sarily a bad thing. Some brewers get merged, some go out

of business, and then others take their place. Our member-

ship has been getting larger, with our national organisations

reporting increases in membership as well. For example, in

France, five years ago there were 40 members, and this

has now increased to 70 members in the

national organisation. However, it is not a

good thing to kill fledgling businesses with

more excise taxes.

No two countries in Europe have the

same policy on packaging, nor the same

preferences – some countries prefer beer

in cans, while others seem to like glass

bottles.

There has been no European harmo-

nisation on packaging as of yet, but I

believe both metal and glass will contin-

ue to have a future in Europe. The recy-

cling issue continues to be an important

one and the day will come when there

will be one directive from the EU about

packaging for beers, but it is a very sensi-

tive issue – and one of national pride in

some cases.

Another issue for brewers is labelling for

ingredients and nutrition. Fortunately for us, we have noth-

ing to hide from the consumer – it is an agricultural product.

It is a good product when consumers drink it in moderation,

and we only ask that there is no discrimination against beer

on behalf other alcoholic drinks – we only wish for a level

playing field with wine, spirits and so forth. q

Candid

April 2009 CanTech International

Candid (adj.truthful and straightforward; frank)

Rodolphe deLooz-Corswarem, Secretary General, The Brewers of Europe discusses the future of beer in Europe

If you would like to be

featured in the Candid

column, or you know

someone who would,

please contact

Suzanne Christiansen.

Email:

[email protected]

Tel: +44 1474 532 202

54

Beer: some facts

• Germany drinks the most beer in Europe – 118 litres

per capita annually

• Sweden is very fond of cans – 64.2% of beer con-

sumed in the country is sold in a can

• In the UK, 55% of beer sold is draught, and cans repre-

sent a strong 29.8% of all beer consumed

Source: The Brewers of Europe, 2004/05

P.54 CANDID April**.indd 1 22/4/09 15:50:06

There is only one wayto make sure you see

EVERY issue ofCanTech International

Name .....................................................................................

Job Title .................................................................................

Company Name ..................................................................

Delivery Address ...................................................................

................................................................................................

Town/City ..............................................................................

County/State ........................................................................

Postal/Zip Code ...................................................................

Country ..................................................................................

Telephone .............................................................................

Fax ..........................................................................................

E-mail .....................................................................................

Subscription rates (tick one box)

ONE YEAR (tick one box) ❒ $185 ❒ €133

TWO YEAR (tick one box)❒ $320 ❒ €234

❒ Yes I want to subscribe to CanTech International

Signature ................................................. Date .....................

Payment options (tick one option)

❒ I enclose a cheque for..................(amount) payable to Bell Publishing Ltd

❒ Please send an invoice to the above address

❒ Please charge ..................(amount) to my

❒ Mastercard ❒ VISA

Card No. ........................................................................

Expiry Date ......................................................................

SEND TO: CanTech International, Bell Publishing Ltd, The Maltings, 57 Bath Street, Gravesend, Kent DA11 0DF, UKFAX TO: +44 1474 532203

For only €133/$185 you will receive your own personal copy of CanTech International for 12 months. You will also receive FREE OF CHARGE:

■ Unlimited password access to our on-line library of news and features@ www.cantechonline.com – FREE!

■ Weekly electronic newsletter with up-to-the-minute information – FREE!

Subscribe on-line NOW: www.cantechonline.com

CT0

409

Can TechINTE RN

AT I ONA L

SEPTEMBER/OCTOBER 2008

Supplier Profile 2008

Asia Focus

Interview

Greg Stokes

Tooling

developments

��

��

Can TechINTERNATIONAL

Supplier Profile

CanCan TechINTE RNAT I ONA L JANUARY/FEBRUARY 2009

Asia CanTech review

Award winnersEnds & end makingInspection

Aerosols

��

��

There is only one wayto make sure you see

CanTech International

For only €133/$185 you will receive your own personal copy of

TechINTE RNAT I ONA L JANUARY/FEBRUARY 2009

review

Can TechINTE RN

AT I ONA L

MARCH 2009

Three-piece update

Handling & Conveying

Tinplate pricing

Japan

��

��

IBC-CT SUBS ADAPR.indd 1 22/4/09 10:40:13

Simplify like never before, with Feature Suppression Technology.TM

4 Wax Marks (Pass)

1 Scrap In Die (Fail)

2 Coating Scratches (Fail)

2 Clipouts (Fail)

3 Compound Voids (Fail)

1 Single Inspection Tool

Introducing a breakthrough inspection solution for three-piece can beaded areas. Now just one tool, instead of several, lets machine vision suppress the variations and simplify the image so it can be inspected as a whole. It takes a Genius® system with new Feature Suppression Technology to bring this unprecedented simplicity and effectiveness to your operations. Detect the defects without false rejects in beaded areas and more. Feature Suppression is one of our powerful new technologies dedicated to maximizing your performance and profi tability. That’s pure Genius.

Feature Suppression Technology suppresses image variations created by rings in the beaded area (left), resulting in a simplifi ed image (right) that improves inspection capability.

(Actual container defect)

www.appliedvision.com

AVC_0083_Ads2009_CanTech.indd 3 1/12/09 1:27:41 PM

Documents

USED QUALITY Used Equipment MACHINERY FOR SALE · 28 April 2009 CanTech International USED QUALITY MACHINERY FOR SALE COMPLETE LINES • 2 Piece Alu. can line for beverage 211/206