Embed Size (px)
Citation preview
– U.S. Pavilion Companies at JEC World 2017 – The U.S. companies registered in the list below are looking for new customers and commercial partners all around the world. If you would like our assistance to connect with them, we will be happy to do so. The Paris Commercial Service will welcome you in Hall 6 within the U.S. Pavilion, Booth Q45. Please take the time to contact us so we can help
you make the most of your visit at the JEC fair.
We look forward to meeting you at JEC 2017!
http://www.jeccomposites.com
Booth Number: R31f
Web: http://www.accudyne.com
Product Description: ACCUDYNE SYSTEMS is an internationally recognized provider of custom automation equipment for producing intermediary materials, preforms and finished parts. For over twenty years, Accudyne has specialized in providing solutions to complex equipment processing challenges. Much of their work involves the design and manufacture of part specific equipment to automate difficult and/or labour-intensive processes. Their areas of expertise include tape and tow placement, cut and add on-the-fly, robotic pick-and-place, kitting, shape forming, debulking, wrapping, out-of-autoclave processing and cross-ply converting.
Contact Name: Michael Smoot
Email: [email protected]
ANGUIL ENVIRONMENTAL SYSTEMS
Booth Number: R39d
Web: http://www.anguil.com
Product Description: Anguil Environmental provides fully integrated systems for air pollution abatement at carbon fibre and composite operations located throughout the world. The company is intimately familiar with the capture, control and compliance hurdles that processing plants face with regards to volatile organic compounds, hydrogen cyanide (HCN), ammonia, silicone, nitrogen oxides (NOX), styrene and odorous emissions. Anguil designs, manufactures, services and installs energy-efficient Regenerative Thermal Oxidizers (RTOs) as well as Direct-Fired Thermal Oxidizers (DFTOs) that are specifically designed for carbon fibre ovens and furnaces.
Contact Name: Kevin Summ
Email: [email protected]
ACCUDYNE SYSTEMS
AUTOMATED DYNAMICS
Booth Number: R31c
Web: http://www.automateddynamics.com
Product Description: For over 30 years, Automated Dynamics has been a global leader in automated composite production. They specialise in the manufacturing of high-performance composite structures, development of advanced automation equipment, and solution-based engineering services. Through the use of a true out-of-autoclave (OoA) process, they bring additive manufacturing to continuous fibre thermoplastic composite parts; saving weight and improving reliability in today's most demanding engineering environments. They offer patented Automated Fibre Placement (AFP) technologies, and they have produced hundreds of thousands of composite parts for over 500 clients in 17 countries.
Contact Name: Adam Bush
Email: [email protected]
BRPH
Booth Number: R39a/R45
Web: http://www.brph.com
Product Description: For five decades, BRPH Architecture and Engineering services has helped shape the sites and facilities where the next generation of manufacturing is taking place. The BRPH team has designed some of the world’s most sophisticated composite manufacturing facilities for the world’s major OEMs and suppliers, including Boeing and Triumph Aerostructures. From 10,000 square foot operation centers to 1.2 million square foot assembly buildings, they are experts in complex composite manufacturing plants for nearly all of the world’s largest aviation companies.
Contact Name: Amandine Noel Crabtree
Email: [email protected]
CHAFEE CENTER FOR INTERNATIONAL BUSINESS
Booth Number: Q45g
Web: http://www.bryant.edu/chafeecenter
Product Description: Founded in 1988, the John H. Chafee Center for International Business at Bryant University works in partnership with the Rhode Island Commerce Corporation to assist companies with their international business needs. The Center provides comprehensive international trade services to help businesses expand into international markets. Services include organised trade events, business development programmes, training and one-on-one consulting. The Center also supports Bryant University's International Business Degree programme and other academic programmes.
Contact Name: Linda Woulfe
Email: [email protected]
CLEAR CARBON AND COMPONENTS INC.
Booth Number: Q45g
Web: http://www.clearcarbon.com
Product Description: Clear Carbon and Components (C3) specializes in developing and manufacturing high-end composite components for manufacturers and wholesale distributors in many different industries.
Experts in out-of-autoclave processing technology such as matched tooling, compression moulding, forged carbon, infusion and VARTM. Capability to take composite projects through all phases from design through to commercial production. 3D modelling and CNC machining expertise. Their capabilities gives them the ability to create their own tooling and develop new processing technologies.
Contact Name: Matt Dunham
Email: [email protected]
COMPOSITE ALLIANCE OF RHODE ISLAND
Booth Number: Q45g
Web: http://www.ricomposites.com
Product Description: Rhode Island’s East Bay is the home to more than 35 companies that focus primarily on carbon fibre and fibreglass composite manufacturing. Statewide, there are more than 50 composite companies in this industry. In addition to production companies, Rhode Island has supporting companies including product weavers such as Concordia Fibers; suppliers such as Gurit, Composites One and Core Composites; one of the country’s leading mould builders, Symmetrix; education and training providers such as IYRS and short-term training programmes such as the Marine Trades Pre-Apprenticeship Training Programme; research and advanced training facilities including University of Rhode Island, Roger Williams University and Rhode Island School of Design.
Contact Name: Wendy Mackie
Email: [email protected]
COMPOSITE SOLUTIONS CORPORATION
Booth Number: R39a/R45
Web: http://www.compositesolutions.com
Product Description: Composite Solutions manufactures high strength, lightweight composite structures and components for commercial and military aircraft, helicopters and business jets. They have extensive experience with commercial aerospace and defense contracts including Bell Helicopter, Boeing, McDonnell Douglas, Raisbeck Engineering, Airbus, Beechcraft and Sikorsky. Composite Solutions Corporation was founded in 1995 and since then has been supplying leading aircraft manufacturers with lightweight, high quality composite systems and components. They have earned the confidence of aerospace Original Equipment
Manufacturers (OEMs) and established themelves as a reliable and recognized partner.
Contact Name: William Zielinski
Email: [email protected]
CONCORDIA FIBERS
Booth Number: R31e
Web: http://www.concordiafibers.com
Product Description: Concordia Fibers pioneered the development of commingling carbon fibre with thermoplastic fibres to produce flexible thermoplastic prepregs for use in advanced thermoplastic composites. Concordia’s PEEK and PPS commingled yarns have been used in a variety of aerospace applications. Nylon, PET, and polypropylene commingled yarns have been used in consumer products including tennis racquets, bike frames, and hockey sticks. Concordia has specialized in the development of engineered yarns for technical fabrics since 1920. Other applications include twisted carbon fibre for weaving 3D preforms. As an ISO 9001:2008 company, they are committed to producing quality products with excellent customer service.
Contact Name: Randal Spencer
Email: [email protected]
ECONOMIC DEVELOPMENT ALLIANCE OF SKAGIT COUNTY
Booth Number: R39a/R45
Web: http://www.skagit.org
Product Description: EDASC promotes the economic development of Skagit County, Washington, USA. Located halfway between the high-tech and advanced manufacturing centres of Seattle and Vancouver, Canada, Skagit County is home to innovative world leaders in composites, precision tools, prototypes, metals, and engineering services bridging the aerospace, maritime, and energy industries. Skagit Valley College offers comprehensive training programmes in composites fabrication, and leads a US National Science Foundation-funded project to develop a composites recycling curriculum. EDASC seeks to meet companies and
research institutions interested in expansion into the United States, and in making connections with supply chain and education partners in Skagit County.
Contact Name: Sean Connell
Email: [email protected]
ES MANUFACTURING INC.
Booth Number: R39c
Web: http://www.esmfg.com
Product Description: World largest manufacturer of tools for the fiberglass and composite industries. Products include over 1000 different laminating rollers including thin fin, long groove, slotted paddle, bristle, aluminum, plastic, radius barrel, filet corner, bubble buster, quick release, economy and deluxe. Other products include spray guns, chopper guns, drum mixers, fiber cutters, micron gages, laminate gages, MEKP dispensers, demolding wedge, scissors, and various accessories.
Contact Name: Thomas Elder
Email: [email protected]
FIBER MATERIALS INC.
Booth Number: Q31b
Web: http://www.fibermaterialsinc.com
Product Description: FMI designs, develops & manufactures composite materials & components that perform in the most demanding applications & the most extreme environments. Their core strength is the ability to weave the most intricate fiber reinforcement designs & convert them to products which perform beyond the capabilities of conventional laminate composites, ceramics & metals. Leveraging this fabrication technique since ‘69, they have grown to be the leading supplier of propulsion hot components & thermal protection system materials in the space industry. Their products enable the most difficult missions, survive at the most
extreme temperatures & provide the utmost reliability to customers. They serve the US military, NASA & aerospace & industry customers.
Contact Name: Megan McMahon
Email: [email protected]
FINISH KARE MOLD RELEASE
Booth Number: Q45a
Web: http://www.FinishKare.com
Product Description: For over 35 years, Finish Kare has been manufacturing premium mould release products. Their complete line includes cleaners & sealers to prepare mould, wax & non-wax based (semi-permanent) mould release agents for multiple easy releases & compounds and polishes to rejuvenate used/old moulds. Their products are designed to work together to make sure moulds are producing at optimum performance. They also manufacture PVA, PV6, Mould Storage Wax, Edge Wax, Slurry/Polymer Hat wax, Traffic Wax, Concentrate Release Agents, Hand or Sprayable Interphase & Release Wax and Surfacing Agent.
Contact Name: Jitu Jhaveri
Email: [email protected]
GABRIEL PERFORMACNE PRODUCTS
Booth Number: Q31d
Web: http://www.gabrielchem.com
Product Description: Gabriel Performance Products, LLC is a market-leader in epoxy curing agents and phenoxy resin manufacturing. They produce an extensive line of epoxy curing agents based on polyamide and polymercaptan technology. These products find use in coatings, adhesives, sealants, and elastomer products (CASE) as well as composite applications. Gabriel is the leading manufacturer of phenoxy resins. Phenoxy resins are used as coatings and as additives for many polymer systems. Their products are sold under the VERSAMID, CAPCURE, GABEPRO and PHENOXY PK brand names.
Contact Name: Jeffrey Gates
Email: [email protected]
GENERAL PLASTICS MANUFACTURING COMPANY
Booth Number: R39a/R45
Web: http://www.generalplastics.com
Product Description: Aerospace OEMS and Tier 1 companies look to General Plastics for unique chemistry-based solutions, centered on their signature polyurethane foams. General Plastics supports engineer and design teams in diverse industries such as composite core, aerospace, tooling and prototyping. They supply LAST-A-FOAM® sheet stock, as well as machined and fabricated parts for composite-manufacturing applications. Regardless of particular applications, They garantee the quality and consistency of their HDU foam products and their ability to scale production to meet most demanding production needs.
Contact Name: Kris Hsin
Email: [email protected]
GLOBE MACHINE
Booth Number: R39b
Web: http://www.globemachine.com
Product Description: Globe Machine engineers and manufactures high capacity automated manufacturing systems for conversion of a multitude of composite materials utilized in a variety of applications. Globe’s patented RapidClave® cure technology offers a vastly improved and flexible process environment that has been demonstrated to achieve industry-leading fast cycles, as well as tightly controlled temperature gradients in complex laminates. Globe’s formatting and conversion process equipment is enabling high volume adoption of continuous fiber reinforced thermoplastic (CFRT) tape, empowering composite structural engineers to design parts of improved mechanical properties and mass savings. Globe designs and manufactures systems for a wide range of industries.
Contact Name: Jim Martin
Email: [email protected]
HEATCON COMPOSITE SYSTEMS
Booth Number: R39a/R45
Web: http://www.heatcon.com
Product Description: HEATCON Composite Systems has been involved in the support of advanced composite repairs since 1981. For over 35 years, the company has committed its time and product development to improving composite repair processes. As a leading global manufacturer and supplier of composite repair solutions, they provide a full range of hot bonders, accessories, technical services, and certified and non-certified materials to repair composite flight controls and other main aircraft parts. They specialize in working with aircraft manufacturers, defence organizations, commercial airlines and maintenance repair organizations (MROs). They also service other composite industries including automobile, marine and wind energy.
Contact Name: Mr. Alejandro
Email: [email protected]
IMPACT GUARD LLC
Booth Number: Q45c
Web: http://www.impactaurd.com
Product Description: Impact Guard manufactures a broad range of thermoplastic materials in both sheet and roll form. These materials are well suited for use in a wide range of industries and applications, and can be custom engineered to meet customers specific needs.
Contact Name: Sam Osten
Email: [email protected]
JANICKI INDUSTRIES
Booth Number: R39a/R45
Web: http://www.janicki.com
Product Description: Janicki Industries is a privately owned, full-service engineering and manufacturing company with facilities in Washington and Utah, USA. Janicki specializes in tooling and parts made of advanced composite materials and metals. They support the Aerospace, Marine, Energy, Military and Transportation Industries. Janicki is capable of tackling large complex projects, utilizing large-scale precise five-axis mills, curing ovens, autoclave, cleanroom and annealing furnace. They have extensive experience using many composite systems including: syntactic putty; carbon/fiberglass hybrid; carbon fiber; invar, aluminum and steel molds.
Contact Name: Steven Lynn
Email: [email protected]
KAMAN AEROSYSTEMS
Booth Number: Q45e
Web: http://www.kaman.com
Product Description: KAMAN Aerospace Composites Structures provides composite and metal bonded parts, including tooling for the Aerospace market. From its 5 sites in Connecticut, Vermont and Wichita USA plus Darwen UK and JV in Goa, India it totals 800+ employees, 16 autoclaves and 600,000 sq ft floor space. All KAMAN sites are ISO9001, AS9100 and Nadcap accredited for layup, autoclave, oven/ press curing, RTM, filament winding, metal bond, paint, and assembly. Products include aircraft doors, flight control surfaces, winglets, lightweight fairings, radomes, electronic enclosures, helicopter rotor blades, etc.. KAMAN Tooling Ltd designs and manufactures large mold and rout tooling, trim jigs, assembly and transportation fixtures and work stations.
Contact Name: David Owen
Email: [email protected]
LITZLER/PSC
Booth Number: R31a
Web: http://www.calitzler.com
Product Description: Litzler manufactures a wide range of custom machines for the composites industry. For carbon fibre production, Litzler supplies oxidation ovens with the patented G5 End-seal, plasma oxidation ovens, and complete carbon fibre lines including roll stands, tension stands, sizing and surface treatment. Complete line coordination with Litzler automation drives and controls. Litzler manufactures all major types of prepreg machinery: solution, hot melt and thermoplastic systems for both fabric and UD tape. Metering rolls feature up to 0.00005 inch (0.0127 mm) TIR precision and complete control systems with the latest designs.
Hot melt and thermoplastic machines feature unique compaction rolls that offer precision tolerances.
Contact Name: Susan Beohmerle
Email: [email protected]
MAINE INTERNATIONAL TRADE CENTER
Booth Number: Q31b
Web: http://www.mitc.com
Product Description: The state of Maine is home to a robust composite manufacturing industry supported by strong R & D. It has a long history in transportation as Amos Whitney, co-founder of Pratt & Whitney, was born in Maine and to this day, the state is home to one of the company’s highest quality output plants in the world.
The boat-building heritage spans four centuries and ranges from one of only two U.S. Navy shipbuilding yards in the country, to small luxury and utility boats as well as composite infrastructure. The textile industry has spawned new generations of advanced materials with products range from flame retardant fabrics to fiberglass and composite materials in all manner of applications from aerospace and ballistics to medical and scientific.
Contact Name: Maria McIntyre
Email: [email protected]
MAINE MARINE COMPOSITES
Booth Number: Q31b
Web: http://www.mainemarinecomposites.com
Product Description: Maine Marine Composites (MMC) is an ocean engineering firm that provides complete solutions for complex engineering problems and offshore energy and aquaculture systems.Specializing in computer-aided design and analysis, MMC addresses complex hydrodynamic and ocean engineering problems including sea keeping analysis and mooring systems designs.
Contact Name: Stephen Von Vogt
Email: [email protected]
MASTER APPLIANCES CORP.
Booth Number: R39e
Web: http://www.masterappliance.com
Product Description: Surface Temperature Control Heat Guns....Master is North America's leading designer and manufacturer of professional quality heat tools for industry. They are proud to introduce new 230V, CE Certified, ProHeat STC® Surface Temperature Control Heat Guns, with electronically integrated IR Sensor and Laser Targeting System. These heat guns are ideal for hand layup of prepreg composite materials. Located near Chicago in the USA, Master offers a full range of electronic heat guns, heat blowers and butane-powered soldering irons, torches and flameless heat tools.
Contact Name: John Brott
Email: [email protected]
MCCOY MACHINERY
Booth Number: Q31f
Web: http://www.mccoymachinery.com
Product Description: For more than 50 years, MMC has been a leader in typical and specialty creels as well as tension control technology. With revolutionary new designs like the unique waist high yarn sheet, the MMC prepreg unrolling creels are leading the way. Tension control is available in multiple forms including dead weight, spring, and pneumatically-controlled zones. Driven specialty and prepreg creels are also available for individual end tension control and real-time tension monitoring. MMC offers tension controlled creels for carbon, aramid, glass, prepreg, hybrid, wire, medical, hollow and PAN precursor fibres. Applications include warping, weaving, dipping, prepreg, pultrusion, coating, fibre placement and further processing of single strands.
Contact Name: Kevin Ahlstrom
Email: [email protected]
MONTALVO
Booth Number: Q31b
Web: http://www.montalvo.com
Product Description: Automated processing, continuous processing, improved product quality, increased production speeds and reduced scrap are critical for composites manufacturers to meet increasing demand and high volume manufacturing. High quality automated tension control is the key to unlocking all of these benefits. Montalvo is a worldwide industry leader in web tension control for the composites industry and have created innovative and cost effective technologies to meet the unique demands of composites manufacturing, while easily integrating them into existing processes. Montalvo has been recognized for their composites tension control knowledge and expertise as conference speakers as well as contributors to JEC magazine and CompositesWorld magazine.
Contact Name: Larry Jones
Email: [email protected]
NEW ENGLAND BOATWORKS
Booth Number: Q45g
Web: http://www.NEBoatworks.com
Product Description: Founded in 1988, New England Boatworks Inc. has built a reputation as a “CAN DO” company. Whether repairing a race boat overnight so it can keep racing, building a composite clock tower & delivering it to downtown Manhattan or designing & fabricating composite & metal assemblies & components. NEB has stock tooling for wheels, pedestals, & sprits that may work for your project. For more customized parts, the engineers at NEB can machine plugs & molds. NEB offers a wide range of services including: Custom autoclave cured composite components, Construction of architectural & artistic structures, Construction of state-of-the-art sail & power yachts, Design & engineering services, 3-D Scanning, reverse engineering, 5 axis machining, & more.
Founded in 1988, New England Boatworks Inc. has built a reputation as a “CAN DO” company. Whether repairing a race boat overnight so it can keep racing, building a composite clock tower & delivering it to downtown Manhattan or designing & fabricating composite & metal assemblies & components. NEB has stock tooling for wheels, pedestals, & sprits that may work for your project. For more customized parts, the engineers at NEB can machine plugs & molds. NEB offers a wide range of services including: Custom autoclave cured composite components, Construction of architectural & artistic structures, Construction of state-of-the-art sail & power yachts, Design & engineering services, 3-D Scanning, reverse engineering, 5 axis machining, & more.
Contact Name: Abigail Smith
Email: [email protected]
PHOENIX EQUIPMENT COMPANY
Booth Number: Q31c
Web: http://www.phoenixequipment.com
Product Description: Phoenix composites equipment, located in largo, fl usa, is a manufacturer of plural equipment for the composite industry. Their product offering includes spray up equipment for polyester, polyurea and epoxy resin in pump sizes ranging from 1gpm to 16gpm. phoenix also builds stainless steel impregnation systems for epoxy and polyester resin, monitoring equipment, heaters and speciality custom equipment. Additionally, they are now building loop-sealing equipment.
Contact Name: Lauren McGehee
Email: [email protected]
PORT OF PORT ANGELES
Booth Number: R39a/R45
Web: http://www.portofpa.com
Product Description: The Port of Port Angeles is ready to meet the needs of the composite industry.
• Composite Manufacturing Campus
• 7 manufacturing buildings (250,000 ft2) and room for growth
• Access to composite tenants with autoclaves, non-destructive testing lab, finishing areas
• Deep water harbor, airports, available property with industrial zoning
• Low electricity rates, proximity to markets and a skilled workforce
• Composite Recycling Technology Center (CRTC)
• State of the art facility housing carbon fiber manufacturing expertise and equipment, workforce training, and collaborative environment
Contact Name: Daniel Binswanger
Email: [email protected]
PSC, INC.
Booth Number: R31a
Web: http://www.pscrfheat.com
Product Description: PSC designs and manufactures High Frequency (HF) dryers. Their state of the art fiberglass roving dryers are the world standard and are used by the most advanced fiberglass manufacturing companies. Their unique design allows for easy automation to reduce labor cost and handling damage. PSC dryers are also used for fiberglass mat and chopped strand. For composites processing, PSC HF pre-heaters are used in many pultrusion lines with significantly higher line speeds for thick parts. Their HF pre-heaters can also be used to quickly heat SMC parts prior to molding.
Contact Name: Susan Beohmerle
Email: [email protected]
RHODE ISLAND ECONOMIC DEVELOPMENT COPRORATION
Booth Number: Q45g
Web: http://www.commerceri.com
Product Description: Rhode Island is a state thriving on collaboration, innovation and entrepreneurship. Spearheaded by Governor Gina M. Raimondo and led by the Rhode Island Commerce Corporation, the state is focused on making it easier and more desirable to do business through tools such as, workforce training, tax incentives, financing vehicles and infrastructure enhancements. Rhode Island is home to 75 companies engaged in many aspects of composite building, providing a wealth of trained professionals and knowledge. Their robust talent pipeline is supported by leading research institutions and career programs that graduate ready-to-work individuals trained in composites.
Contact Name: Katherine Therieau
Email: [email protected]
STONER MOLDING SOLUTIONS
Booth Number: R31d
Web: http://www.stonersolutions.com
Product Description: Stoner Molding Solutions is a US based manufacturer of mold release agents providing solutions for composites, PU, and thermoplastics. They have a world wide presence with offices in the US, UK, Mexico City, and Hong Kong and 57 international distributors. Brands include Honey Wax, KantStik, TraSys and Releasomers.
New for 2017 is the introduction of Honey Wax Hydro Speed. This innovative product is a solvent free version of Honey Wax. It is totally non hazardous, nonflammable, and spreads and wipes off 50% faster than traditional paste waxes. A companion product to this is LM 17, a solvent free economical wax to replace traditional edge and flange waxes. Samples will be available during JEC.
Contact Name: Win Doolittle
Email: [email protected]
SWORL REUSABLE VACCUM BAGS
Booth Number: Q31a
Web: http://www.sworl.com
Product Description:
Demonstrations of Spray materials and SSM3 equipment for use in creating net shape reusable vacuum bags (RVB), will be conducted DAILY AT BOOTH Q31a. SWORL bags are being used for infusion,OoA,& prepreg apps. SWORL is aerospace contamination level compliant. SWORL bags are being used with all resin systems, PE-VE-PU-EP-Ph. SWORL's UNIQUE features include: multi spray layer adhesion, WORLDS highest BAG strength, reinforcement is NOT required making SWORL bags lighter in weight. SWORL bags can be made to include molded in breather and resin channels. All accessories necessary to make & use bags are available. SSM-3 spray equip is low cost, light weight, portable and delivers ready to spray. Training & Technical assistance available.
Contact Name: Larry Audette
Email: [email protected]
TEX TECH INDUSTRIES INC.
Booth Number: Q31b
Web: http://www.textechindustries.com
Product Description: Since it started manufacturing engineered textiles in 1904, Tex Tech has grown to be one of the world's leading needle and woven felt manufacturers. The flagship Maine manufacturing facility is 200,000 sq. ft. and to the Tex Tech technical and R & D centers. A market leader in high-performance textiles, now including 3D woven fabrics, Tex Tech manufactures over 7,000 products in Thailand and the UK. Tex Tech’s highly-engineered materials are industry leaders for personal and product protection, as well as a range of industrial applications. M-Aramids (Nomex), P-Aramids (Kevlar), Basofil and Pre-Ox Pan are just a few of the many fibers used by Tex Tech to develop its long list of high quality, high-performing products.
Contact Name: Keith Sharp
Email: [email protected]
THERMWOOD
Booth Number: Q31e
Web: http://www.thermwood.com
Product Description: Thermwood Corporation, located in Southern Indiana and established in 1969, offers both three & five axis CNC machining centers ideally suited for the production, fabrication & trimming of wood, plastics, non-ferrous metals, composites and other advanced materials. Thermwood also offers a Large Scale Additive Manufacturing (LSAM) system for 3D printing reinforced thermoplastic composite materials for producing industrial tooling, molds, patterns, masters, plugs and fixtures for various industries. Thermwood is a US based company with dealers and distributors worldwide. Thermwood has a technical service organization that provides support, machine installation, training, retrofits, custom programming and production assistance.
Contact Name: Jason Susnjara
Email: [email protected]
TMP, A DIVISION OF FRENCH
Booth Number: R31b
Web: http://www.frenchoil.com
Product Description: TMP, A Division of French custom designs, manufactures and supports technologically advanced hydraulic presses with advanced controls for greater press control and press flexibility. Press capacities generally range from 5 to 2,000 tons with a variety of platen sizes for high temperature heating. Their experienced team of engineers partner with customers to understand their process and provide custom press systems that improve part quality and yield lower overall production costs. TMP Press Systems include compression, lamination, transfer and vacuum presses; stand alone and turnkey systems; laboratory to large size platens; multiple daylight openings; automated preheat & material handling; high temperature heating to 1200 °F.
Contact Name: Tayte Lutz
Email: [email protected]
TRI-MACK PLASTICS MANUFACTURING CORP.
Booth Number: Q45g
Web: http://www.trimack.com
Product Description: Tri-Mack manufactures high-temperature thermoplastic components for critical aerospace and industrial applications. Using a collaborative engineering approach, they work closely with customers to develop high-quality solutions that meet cost, weight and performance goals. Tri-Mack’s Advanced Composites Centre features automated processing of UD thermoplastic composites from layup to formed shape. Their broad capabilities include injection moulding, tool making, multi-axis machining, bonding and assembly. Tri-Mack’s hybrid moulding technology combines UD thermoplastic composites with injection moulding, producing formed shapes and complex overmoulded assemblies straight from the mould. Tri-Mack is ISO9001:2008, AS9100 and NADCAP certified.
Contact Name: Jamie Bagely
Email: [email protected]
UNIVERSITY OF MAINE
Booth Number: Q31b
Web: http://www.composites.unmaine.edu
Product Description: The University of Maine Advanced Structures and Composites Center is a world-leading, interdisciplinary center for research, education, and economic development encompassing material sciences, manufacturing, and engineering of composites and structures. The Center is a 9,300 square meter ISO 17025-accredited testing laboratory with more than 150 full and part time personnel. Since 1996, the Center has: financially supported more than 2,000 positions for undergraduate and graduate students; served more than 500 industrial and governmental clients, formed 14 spinoff companies through licensing agreements of patents or trade secrets, built the longest carbon-fiber composite vessel for the US Navy.
Contact Name: David Erb, Jr.
Email: [email protected]
UTAH ADVANCED MATERIALS & MANUF. INITIATIVE
Booth Number: Q45b
Web: http://www.uammi.com
Product Description: The Utah Advanced Materials and Manufacturing Initiative (UAMMI) brings together public, private, community, industry and education partners to assure growth and sustainability of some of Utah’s most important manufacturing clusters in Aerospace/Defense, Outdoor Products and Transportation Equipment. Utah is home to the largest US manufacturing site for carbon fibers and some pioneering leaders such was Orbital ATK, Boeing, Albany, Radius and many more.Utah has more than 50 years of history in the development and advancement of these materials and has a worldwide reputation as one of the leaders in this industry.
Contact Name: Jeff Edwards
Email: [email protected]
UTAH COMPOSITES INDUSTRY
Booth Number: Q45b
Web: http://www.uammi.com
Product Description: Utah has a thriving advanced composites industry with more than 50 years of experience in manufacturing and R&D. Aerospace companies like Boeing, Orbital ATK, Hexcel, Janicki, Albany International and Radius Engineering have major operations in the state, along with recreation companies like Black Diamond, Hoyt, Easton and Reynolds. Utah has more than 100 companies and 10,000 workers in composites jobs. They also have strong training programs, with production, technician and engineering education programs at their universities and community colleges across the state. It is home to the most active SAMPE chapter and one of the fastest growing economies in the USA.
Contact Name: Jeff Edwards
Email: [email protected]
WABASH MPI / CARVER, INC.
Booth Number: Q45d
Web: http://www.wabashmpi.com
Product Description: Wabash MPI/Carver Inc. are premier manufacturers of presses for the composite industry. Whether your needs are laboratory, testing or full-scale production, Wabash and Carver can meet your requirements. They have a full line of standard hydraulic and pneumatic presses in capacities that range from 0.5 to 1200 tons (MT) and platen sizes from 6in X 6in (15cm X 15cm) to 6ft X 12ft (2m X 4m). Wabash MPI and Carver Inc. can also custom engineer a press system for your specific application. Options include eject systems, data acquisition, recipe storage, bladder and core pull circuits and many more. Visit their booth in the US Pavilion with your application requirements and let them help specify a hydraulic or pneumatic press to fit your needs.
Contact Name: David Singer
Email: [email protected]
