RILESA ApSSupplier of drillingmachine and

Handling equipment to the Woodworking industry

UNI-X 2200

www.rilesa.dkrilesa@rilesa.dk

We also manufacture:

VAKMIX 6000

Vlg 1524

VAKMIX STAFET VAKMIX 6000P

VLGD 1524

VAKMIX STAFET

UNI-X

WinProfi

For long components support elements can eaisly be added. Theyare located with a simple clamp and ensure straightering of the workpiece.

Assembly of drill boxes takes place with a snap function and is simply locked with screw. The drill box can be freely turned between 0 and 90°.In the outer positions there are stops.

The drill groups unique design gives a high degree of adjusment flexibility.The centre distance between groups is 95 mm.Pneumatic over hydraulic drill feed. Drill speed, 4000 RPM.

The machine can be delivered with sideways displacement of the drilling group. The drilling group displace up to 100 mm, this function combined with programming of the drilling, do difficult drilling in one passage, possible.

Loading of components is very easy by pushing the strack in through thebrushes.The machine components are transported gently back to the operater.The conveyer can run continuously or in step mode.

The drilling boxes are designed forhigh speed drilling, 4500 RPM.The tool inserts can be chosen Between direct or snap assembly.Special drill boxes can be manufactured to specific customerrequirements.

The components are fed in pneumatically up to the reference stop and locked securly in this position.A unique safe regulated system makes sure the component is in place without pressmark.

The control system is integrated in the back of the machine, well protected against dust.There is room for future expansionsto be added.

The machine closed design with built in dust extraction gives the perfect place to work.Notice the sturdy construction of the machine body.

Notice the signal lamps. The operator uses these to make adjustments. The operator manually moves the drill groups into position checking the lights.Yellow to green = Tolerance.

Advanced control system interface aids the operation during set up.There you can key in all relevant data from the drawings.This information provides a good basis fast, precise set up.Programmes can be keyed in, edited, copied and saved.Settings are checked during operation.There can be chosen:In what order do you want to drill.Cross drilling, step drilling and bottom hole cleaning.Time counter and piece counter.How many components you want to drill before stopping.Common parameters can be chosen to increase the speed of programming.Selective languages etc.

UNI-X 2200One-man operated. 4-side drilling, in one pass.With Rilesa UNI-X drillingmachine you get precision, quality and extrem high capacity.It is well suited to both small and large dimensions. It has short set up time and minimalmaintenance.Polyurethane an guides ensure gentle handling of components.The restraining clamp automatically adjust to component width ensuring correct location to the zero point.

Specification:Length: 230-2200 mmWidth: 20-250 mmThickness: 10-80 mmTolerance: ±0,2 mmCapacity: up to 900 subjects/hours without crossdrilling

Technical data:Height: 1900 mmWidth: 1800 mmLength: 3600 mmWeight: 2200 kg