Universal Serial Bus (USB)Voyager™ M3i Protocol

Verification System

1.5M 12M 480M 5G

The Voyager M3i is Teledyne LeCroy's 6th generation USB protocol verification systemdesigned for the next evolution of universal serial bus known as SuperSpeed USB. LeveragingTeledyne LeCroy's extensive expertise in high-speed serial data analysis, the Voyager provides100% accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s.

USB Advisor™ T3 Analyzer

1.5M 12M 480M 5G

The USB Advisor T3 protocol analyzer is an inexpensive, small form-factor, but full featuredanalysis system for those testing USB 3.0 and USB 2.0 devices. It captures, displays, andanalyzes bus traffic using the CATC Trace display software. It automatically highlights protocolerrors while displaying a chronological list of packets with full decoding of USB device classes.

Mercury™ T2 Analyzer

1.5M 12M 480M

The Mercury T2 is the industry’s smallest, most affordable hardware-based USB 2.0 protocolanalyzer family that combines the defacto standard CATC Trace display with powerful analysisfeatures. The Mercury T2 fits into a shirt pocket yet provides much of the same lab qualityprotocol analysis offered in top-of-the-line USB analyzers.

USB 3.0 Test Suites

1.5M 12M 480M 5G

Teledyne LeCroy is the only company that offers a complete line of USB 3.0 test solutions covering transmitter test toprotocol test, and every step in between for comprehensive verification, debug and compliance, through our completeline of oscilloscopes, receiver test and protocol test solutions. See www.lecroy.com for more information on USB 3.0bundles.

Double Data Rate (DDR) SDRAMKib ™ 480 Th L C Kib ™ 480 i d l l l h id h i DDR3Kibra™ 480

DDR3 & DDR4

Protocol Analyzer

The LeCroy Kibra™ 480 is a stand-alone protocol analyzer that provides comprehensive DDR3and DDR4 JEDEC timing analysis. Sitting in-line on a live system, the analyzer uses a proprietaryprobe implementation to allow loss-less capture of high speed DDR transactions whileautomatically identifying timing and protocol violations.

Kibra™ 380 The LeCroy Kibra™ 380 is a stand alone DDR3 protocol analyzer that provides comprehensiveKibra™ 380

DDR3

Protocol Analyzer

The LeCroy Kibra 380 is a stand-alone DDR3 protocol analyzer that provides comprehensiveDDR3 bus and JEDEC timing analysis. Small and portable, the Kibra 380 is controlled over USBusing any Windows-based PC and offers state and timing waveform displays to allow fastdebugging of DDR3 systems and memory controllers.

IEEE 1394 (Firewire)FireInspector™ Analyzer

and Exerciser

100M 200M 400M

Teledyne LeCroy’s FireInspector IEEE 1394 Bus & Protocol Analyzer / Exerciser dramatically speeds "time to market" and simplifies complex development projects with its intuitive CATC Trace display of bus traffic. Advanced analysis features include a tree-structured topology view that updates dynamically with CSR and connection speed information.

Embedded InstrumentsIOTA™ Software Suite The Teledyne LeCroy IOTA Software Suite is designed to work with Intel's next generation

processors, bringing Teledyne LeCroy's world class protocol viewing and intuitive user interfaceto internal trace data from various sources as defined by Intel. The internal trace data isextracted from the system using the Intel provided pod and is fully decoded, time correlatedand viewed using IOTA Software Suite advanced visualization and analysis software.

1-800-5-LeCroyteledynelecroy.com

Local sales offices are located throughout the world.

Visit our website to find the most convenient location.

For other protocols, or for information on Teledyne LeCroy’s other product lines including our complete line of oscilloscopes see teledynelecroy com

©2012 by Teledyne LeCroy Corporation. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.Product brand names and logos are trademarks or requested trademarks of their respective holders.

PSGLINECARD 09/12

line of oscilloscopes, see teledynelecroy.com.

Protocol SolutionsProtocol SolutionsLine Card

Protocol Analyzers, Exercisers,Error Injectors and Compliance Test

Summit™ T3-8 Analyzer& Summit Z3-16 Exerciserfor PCI Express® 3.0 Sierra™ M6-4 and M6-2 Protocol Verification

Systems for 6G SAS/SATA

Voyager™ M3i Protocol

SierraFC™ M164 Analyzer

Verification System for USB 3.0

yfor 16G Fibre Channel

PCI ExpressSummit™ T3-16 Analyzer

2.5 GT/s 5 GT/s 8 GT/s

The Summit T3-16 is Teledyne LeCroy’s highest performance PCI Express protocol analyzer,and supports PCI Express 3.0; data rates of 2.5 GT/s, 5 GT/s and 8 GT/s; full data capture onbidirectional lane widths of x1, x2, x4, x8 and x16; and a full 8 GB of trace memory. The systemoffers advanced features such as performance monitoring, LTSSM, equalization decodes andmuch more.

Summit Z3-16 Exerciser

2.5 GT/s 5 GT/s 8 GT/s

The Summit Z3-16 is Teledyne LeCroy’s fourth generation protocol exerciser, with support forPCI Express at the Gen3 data rates of up to 8 GT/s. The Summit T3-16 Analyzer and SummitZ3-16 Exerciser provide a complete test and development system for engineers working on PCIExpress 3.0 designs.

Summit T3-8 Analyzer

2.5 GT/s 5 GT/s 8 GT/s

The Summit T3-8 supports PCI Express 3.0 in a smaller package designed for lane widths up tox8. Features include data rates of 2.5 GT/s, 5 GT/s and 8 GT/s; full data capture on bidirectionallane widths of x1, x2, x4 and x8 (x16 is available using two units); and 4 GB of trace memory.The system offers performance monitoring, LTSSM, equalization decodes and much more.

Summit T28 Analyzer

2.5 GT/s 5 GT/s

The Summit T28 supports PCI Express 2.0 designs in a compact and economical package.Features include data rates of 2.5 GT/s and 5 GT/s; full data capture on bidirectional lane widthsof x1, x2, x4 and x8; and 4 GB of trace memory. The system offers performance monitoring,LTSSM, equalization decodes and much more.

Edge™ T1-4 Analyzer

2.5 GT/s

The Edge T1-4 Analyzer allows for full bi-directional slot card interposer capture and decode ofx4, x2 and x1 PCI Express links. This analyzer leverages the intuitive and powerful CATC Traceanalysis software system, embedding a deep understanding of the PCI Express protocolhierarchy and intricacies.

PCIe Gen2 Protocol Test

Card

2.5 GT/s 5 GT/s

The Teledyne LeCroy Protocol Test Card (PTC) is a multimodal test board used for checkingadherence to the protocol-oriented sections of the PCI Express 2.0 specification. The TeledyneLeCroy Protocol Test Card has been selected by the PCI-SIG® as the official compliance testtool for PCI Express 2.0 at PCI-SIG Workshops.

ProtoSync® PE

Oscilloscope Decode

2 5 GT/s 5 GT/s 8 GT/s

Provided as an option to Teledyne LeCroy’s WaveMaster® and WavePro® Series ofoscilloscopes, ProtoSync PE goes beyond simple decode annotation and provides the intuitiveCATC Trace and BitTracer views of the captured waveform, with a time and zoom correlation ofphysical layer signals, protocol packets, and logic analyzer byte views on a single instrument.

2.5 GT/s 5 GT/s 8 GT/s

SimPASS™ PE Simulation Analysis

2.5 GT/s 5 GT/s 8 GT/s

Teledyne LeCroy’s new SimPASS PE software application brings all the analytical and decodingpower of a protocol analyzer to the pre-silicon stage of simulation design verification. Decode,troubleshoot and debug your simulation code before taking the expensive step of committingthe design to silicon.

2.5 GT/s 5 GT/s 8 GT/s

Interposers and Probes Teledyne LeCroy offers the industry’s widest range of PCI Express interposers and probes, including a wide variety ofspecialty probes designed to make it simple and easy to probe sophisticated high-speed serial designs..

90 Degree ServerInterposer

AMC Interposer VPX Interposer External Cable Interposer

ExpressCardInterposer

Active Slot Mini Card ExpressModule Passive Slot XMC InterposerInterposer Interposer

pInterposer

Passive Slot Interposer

XMC Interposer

Mid-bus ProbeMulti-lead Probe (solder down)

HP Blade Server Interposer

Compact PCI Serial Interposer

Serial Attached SCSI (SAS)

and Serial ATA (SATA)Sierra™ M6-4 Protocol

Verification System

1.5G 3G 6G

The Sierra M6-4 SAS/SATA test solutions support data rates up to 6 Gb/s, and provide analysis,traffic generation, emulation, error injection, and compliance test capabilities in one flexibleplatform. The Sierra product family sets new standards for performance while incorporating acomplete set of features in a single, economical system.

a d Se a (S )

Sierra M6-2 Protocol

Verification System

1.5G 3G 6G

The Sierra™ M6-2 system provides an economical alternative to the industry-leading Sierra M6-4for customers that require only 1 or 2 SAS/SATA ports. While providing all of the trafficgeneration, emulation, error injection, and compliance test capabilities of the M6-4 the SierraM6-2 delivers this in a more compact package with significant cost savings.

Sierra M6-1 Analyzer

Systems

1.5G 3G 6G

The Sierra M6-1 Analyzer models are ultra-portable single port systems capable of operating at1.5, 3 or 6 Gb/s SAS or SATA data rates, and equipped with 2 or 4 GB of memory. Sierra M6-1Analyzers are software compatible with the Teledyne LeCroy SAS/SATA Protocol Suite, andoffer world class analysis or error injection at price points within reach of every budget.

1.5G 3G 6G

Sierra M6-1 InFusion

Systems

1 5G 3G 6G

The Sierra M6-1 InFusion model performs as a stand-alone 1.5, 3, 6 Gb/s error injector, allowingengineers to modify traffic in order to verify real-world fault handling. The Sierra M6-1 InFusion issoftware compatible with the Teledyne LeCroy SAS/SATA Protocol Suite and is the ideal tool forstress testing systems while running real traffic and actual workloads.

1.5G 3G 6G

STX A6-4 Analyzer

1.5G 3G 6G

The STX A6-4 is an affordable, full-featured protocol analyzer that supports SAS and SATA up to6 Gb/s speeds. The STX A6-4 can be configured as a 1-, 2- or 4-port analyzer, with trace depthup to 8 GB, and can also be cascaded with other STX A6-4 units, increasing the number ofphysical links that can be monitored (up to 32 physical links).

Fibre ChannelSierraFC™ M164 Protocol Analyzer

1G 2G 4G 8G 16G

The SierraFC M164 provides up to 16 Gb/s Fibre Channel data capture and protocol analysis fordevelopers in storage systems, storage networking, and avionics applications. The SierraFCM164 supports 4 recording channels with 16GB of trace memory.

SierraFC™ M8-4 Verification System

1G 2G 4G 8G

The SierraFC M8-4 provides up to 8 Gb/s Fibre Channel data capture and protocol analysis fordevelopers in storage systems, storage networking, and avionics applications. SierraFC M8-4products can be licensed to support 2 or 4 recording channels, a maximum of 8 Gb/s or 4 Gb/sand are field upgradeable. InFusion error injection (“jammer”) capability is an available option.

InfiniBand®

IBTracer™ 4X Analyzer The Teledyne LeCroy IBTracer™ 4X is an InfiniBand Protocol Analyzer that advances validationd li t ti f t ti I fi iB d ili it h d ftand compliance testing for next generation InfiniBand silicon, switches, and software.

Supporting 4 wide 2.5 Gb/s dual-simplex connections (Single Data Rate, SDR), IBTracer 4Xcaptures and displays InfiniBand traffic using the de facto standard CATC Trace™ graphicalinterface.

PCI ExpressSummit™ T3-16 Analyzer

2.5 GT/s 5 GT/s 8 GT/s

The Summit T3-16 is Teledyne LeCroy’s highest performance PCI Express protocol analyzer,and supports PCI Express 3.0; data rates of 2.5 GT/s, 5 GT/s and 8 GT/s; full data capture onbidirectional lane widths of x1, x2, x4, x8 and x16; and a full 8 GB of trace memory. The systemoffers advanced features such as performance monitoring, LTSSM, equalization decodes andmuch more.

Summit Z3-16 Exerciser

2.5 GT/s 5 GT/s 8 GT/s

The Summit Z3-16 is Teledyne LeCroy’s fourth generation protocol exerciser, with support forPCI Express at the Gen3 data rates of up to 8 GT/s. The Summit T3-16 Analyzer and SummitZ3-16 Exerciser provide a complete test and development system for engineers working on PCIExpress 3.0 designs.

Summit T3-8 Analyzer

2.5 GT/s 5 GT/s 8 GT/s

The Summit T3-8 supports PCI Express 3.0 in a smaller package designed for lane widths up tox8. Features include data rates of 2.5 GT/s, 5 GT/s and 8 GT/s; full data capture on bidirectionallane widths of x1, x2, x4 and x8 (x16 is available using two units); and 4 GB of trace memory.The system offers performance monitoring, LTSSM, equalization decodes and much more.

Summit T28 Analyzer

2.5 GT/s 5 GT/s

The Summit T28 supports PCI Express 2.0 designs in a compact and economical package.Features include data rates of 2.5 GT/s and 5 GT/s; full data capture on bidirectional lane widthsof x1, x2, x4 and x8; and 4 GB of trace memory. The system offers performance monitoring,LTSSM, equalization decodes and much more.

Edge™ T1-4 Analyzer

2.5 GT/s

The Edge T1-4 Analyzer allows for full bi-directional slot card interposer capture and decode ofx4, x2 and x1 PCI Express links. This analyzer leverages the intuitive and powerful CATC Traceanalysis software system, embedding a deep understanding of the PCI Express protocolhierarchy and intricacies.

PCIe Gen2 Protocol Test

Card

2.5 GT/s 5 GT/s

The Teledyne LeCroy Protocol Test Card (PTC) is a multimodal test board used for checkingadherence to the protocol-oriented sections of the PCI Express 2.0 specification. The TeledyneLeCroy Protocol Test Card has been selected by the PCI-SIG® as the official compliance testtool for PCI Express 2.0 at PCI-SIG Workshops.

ProtoSync® PE

Oscilloscope Decode

2 5 GT/s 5 GT/s 8 GT/s

Provided as an option to Teledyne LeCroy’s WaveMaster® and WavePro® Series ofoscilloscopes, ProtoSync PE goes beyond simple decode annotation and provides the intuitiveCATC Trace and BitTracer views of the captured waveform, with a time and zoom correlation ofphysical layer signals, protocol packets, and logic analyzer byte views on a single instrument.

2.5 GT/s 5 GT/s 8 GT/s

SimPASS™ PE Simulation Analysis

2.5 GT/s 5 GT/s 8 GT/s

Teledyne LeCroy’s new SimPASS PE software application brings all the analytical and decodingpower of a protocol analyzer to the pre-silicon stage of simulation design verification. Decode,troubleshoot and debug your simulation code before taking the expensive step of committingthe design to silicon.

2.5 GT/s 5 GT/s 8 GT/s

Interposers and Probes Teledyne LeCroy offers the industry’s widest range of PCI Express interposers and probes, including a wide variety ofspecialty probes designed to make it simple and easy to probe sophisticated high-speed serial designs..

90 Degree ServerInterposer

AMC Interposer VPX Interposer External Cable Interposer

ExpressCard Interposer

Active Slot Mini Card ExpressModule Passive Slot XMC InterposerInterposer Interposer

pInterposer

Passive Slot Interposer

XMC Interposer

Mid-bus ProbeMulti-lead Probe (solder down)

HP Blade Server Interposer

Compact PCI Serial Interposer

Serial Attached SCSI (SAS)

and Serial ATA (SATA)Sierra™ M124 Protocol

Verification System

1.5G 3G 6G 12G

The Sierra M124 is the next generation platform in the industry-leading Sierra family of SAS andSATA protocol test systems from Teledyne LeCroy. As the first SAS 3.0 protocol test platform toimplement linear probing technology and a non-retimed pass-through signal, the Seirra M124provides transparent simultaneous protocol analysis of up to four 12 Gb/s SAS ports.

a d Se a (S )

Sierra M6-4 Protocol

Verification System

1.5G 3G 6G

The Sierra M6-4 SAS/SATA test solutions support data rates up to 6 Gb/s, and provide analysis,traffic generation, emulation, error injection, and compliance test capabilities in one flexibleplatform. The Sierra product family sets new standards for performance while incorporating acomplete set of features in a single, economical system.

Sierra M6-2 Protocol

Verification System

1.5G 3G 6G

The Sierra™ M6-2 system provides an economical alternative to the industry-leading Sierra M6-4for customers that require only 1 or 2 SAS/SATA ports. While providing all of the trafficgeneration, emulation, error injection, and compliance test capabilities of the M6-4 the SierraM6-2 delivers this in a more compact package with significant cost savings.

Sierra M6-1 Analyzer

Systems

1.5G 3G 6G

The Sierra M6-1 Analyzer models are ultra-portable single port systems capable of operating at1.5, 3 or 6 Gb/s SAS or SATA data rates, and equipped with 2 or 4 GB of memory. Sierra M6-1Analyzers are software compatible with the Teledyne LeCroy SAS/SATA Protocol Suite, andoffer world class analysis or error injection at price points within reach of every budget.

1.5G 3G 6G

Sierra M6-1 InFusion

Systems

1 5G 3G 6G

The Sierra M6-1 InFusion model performs as a stand-alone 1.5, 3, 6 Gb/s error injector, allowingengineers to modify traffic in order to verify real-world fault handling. The Sierra M6-1 InFusion issoftware compatible with the Teledyne LeCroy SAS/SATA Protocol Suite and is the ideal tool forstress testing systems while running real traffic and actual workloads.

1.5G 3G 6G

EthernetSi N ™ M408 Th T l d L C Si N ™ M408 i h d d i d 10G & 40G E hSierraNet™ M408

10G 40G

The Teledyne LeCroy SierraNet™ M408 is the most advanced integrated 10G & 40G Ethernetprotocol analyzer system available. Based on Teledyne LeCroy’s next generation platform, theSierraNet M408 provides 100% recording of all Ethernet traffic at full line rates on all ports, whilemaintaining the link integrity through custom-designed pass-through probe technology.

Fibre ChannelSierraFC™ M164 Protocol Analyzer

The SierraFC M164 provides up to 16 Gb/s Fibre Channel data capture and protocol analysis fordevelopers in storage systems, storage networking, and avionics applications. The SierraFCProtocol Analyzer

1G 2G 4G 8G 16G

de e ope s sto age syste s, sto age et o g, a d a o cs app cat o s e S e a CM164 supports 4 recording channels with 16GB of trace memory.

SierraFC M8-4 Verification System

The SierraFC M8-4 provides up to 8 Gb/s Fibre Channel data capture and protocol analysis fordevelopers in storage systems, storage networking, and avionics applications. SierraFC M8-4Verification System

1G 2G 4G 8G

developers in storage systems, storage networking, and avionics applications. SierraFC M8 4products can be licensed to support 2 or 4 recording channels, a maximum of 8 Gb/s or 4 Gb/sand are field upgradeable. InFusion error injection (“jammer”) capability is an available option.

Universal Serial Bus (USB)Voyager™ M3i Protocol

Verification System

1.5M 12M 480M 5G

The Voyager M3i is Teledyne LeCroy's 6th generation USB protocol verification systemdesigned for the next evolution of universal serial bus known as SuperSpeed USB. LeveragingTeledyne LeCroy's extensive expertise in high-speed serial data analysis, the Voyager provides100% accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s.

USB Advisor™ T3 Analyzer

1.5M 12M 480M 5G

The USB Advisor T3 protocol analyzer is an inexpensive, small form-factor, but full featuredanalysis system for those testing USB 3.0 and USB 2.0 devices. It captures, displays, andanalyzes bus traffic using the CATC Trace display software. It automatically highlights protocolerrors while displaying a chronological list of packets with full decoding of USB device classes.

Mercury™ T2 Analyzer

1.5M 12M 480M

The Mercury T2 is the industry’s smallest, most affordable hardware-based USB 2.0 protocolanalyzer family that combines the defacto standard CATC Trace display with powerful analysisfeatures. The Mercury T2 fits into a shirt pocket yet provides much of the same lab qualityprotocol analysis offered in top-of-the-line USB analyzers.

USB 3.0 Test Suites

1.5M 12M 480M 5G

Teledyne LeCroy is the only company that offers a complete line of USB 3.0 test solutions covering transmitter test toprotocol test, and every step in between for comprehensive verification, debug and compliance, through our completeline of oscilloscopes, receiver test and protocol test solutions. See www.lecroy.com for more information on USB 3.0bundles.

Double Data Rate (DDR) SDRAMKib ™ 480 Th T l d L C Kib ™ 480 i d l l l h idKibra™ 480

DDR3 & DDR4

Protocol Analyzer

The Teledyne LeCroy Kibra™ 480 is a stand-alone protocol analyzer that providescomprehensive DDR3 and DDR4 JEDEC timing analysis. Sitting in-line on a live system, theanalyzer uses a proprietary probe implementation to allow loss-less capture of high speed DDRtransactions while automatically identifying timing and protocol violations.

Kibra™ 380 The Teledyne LeCroy Kibra™ 380 is a stand alone DDR3 protocol analyzer that providesKibra™ 380

DDR3

Protocol Analyzer

The Teledyne LeCroy Kibra 380 is a stand-alone DDR3 protocol analyzer that providescomprehensive DDR3 bus and JEDEC timing analysis. Small and portable, the Kibra 380 iscontrolled over USB using any Windows-based PC and offers state and timing waveformdisplays to allow fast debugging of DDR3 systems and memory controllers.

IEEE 1394 (Firewire)FireInspector™ Analyzer

and Exerciser

100M 200M 400M

Teledyne LeCroy’s FireInspector IEEE 1394 Bus & Protocol Analyzer / Exerciser dramatically speeds "time to market" and simplifies complex development projects with its intuitive CATC Trace display of bus traffic. Advanced analysis features include a tree-structured topology view that updates dynamically with CSR and connection speed information.

Embedded InstrumentsIOTA™ Software Suite The Teledyne LeCroy IOTA Software Suite is designed to work with Intel's next generation

processors, bringing Teledyne LeCroy's world class protocol viewing and intuitive user interfaceto internal trace data from various sources as defined by Intel. The internal trace data isextracted from the system using the Intel provided pod and is fully decoded, time correlatedand viewed using IOTA Software Suite advanced visualization and analysis software.

1-800-5-LeCroyteledynelecroy.com

Local sales offices are located throughout the world.

Visit our website to find the most convenient location.

For other protocols, or for information on Teledyne LeCroy’s other product lines including our complete line of oscilloscopes see teledynelecroy com

©2012 by Teledyne LeCroy Corporation. All rights reserved. Specifications, prices, availability and delivery subject to change without notice.Product brand names and logos are trademarks or requested trademarks of their respective holders.

PSGLINECARD 09/12

line of oscilloscopes, see teledynelecroy.com.

Protocol SolutionsProtocol SolutionsLine Card

Protocol Analyzers, Exercisers,Error Injectors and Compliance Test

Summit™ T3-8 Analyzer& Summit Z3-16 Exerciserfor PCI Express® 3.0 Sierra™ M6-4 and M6-2 Protocol Verification

Systems for 6G SAS/SATA

Voyager™ M3i Protocol

SierraFC™ M164 Analyzer

Verification System for USB 3.0

yfor 16G Fibre Channel