Embed Size (px)
Citation preview
Shatterproof Safety Lighting SolutionsUnited States Factory & OfficeGlass Surface Systems Corporate24 Brown StreetBarberton, Ohio 44203Phone: 330.745.8500Fax: 330.745.8570Toll Free: 877.644.8500E-Mail: [email protected]: www.glasscoat.com
South Regional Sales OfficeGlass Surface Systems – SouthHouston, TexasPhone: 281.208.0816Fax: 281.403.1476Robert ThomasBusiness Development ManagerE-Mail: [email protected]: www.glasscoat.com
United Kingdom Factory & OfficeGlass Surface Systems – UK260 Abbeydale RoadWembly, Middlesex HA0 1TWPhone: 440 208 991 2500Fax: 440 208 991 2501E-Mail: [email protected]: www.glasscoat.com
Contact Us
Compliance
GSS Mission Statement
GSS – Glass Surface Systems
Glass Surface Systems® is dedicated to the development, design, production
and distribution of the finest quality safety coated lighting products with the
highest commitment to service before and after the sale. GSS will continually
improve our service and quality of product by listening and understanding our
customer's needs and requirements. We will do the job right the first time and
every time for our distributors and customers. Nothing else is acceptable.
We will always do our best to service all of our valued customers.
Avoid plant shutdowns and inspection violations due to the use of uncoated lamps. GSS – Glass SurfaceSystems safety coated products are in compliance with all FDA, USDA, OSHA and NSF regulations.USDA Food Safety and Inspection Services“Light fixtures in rooms where exposed meat or poultry is handled should ensure maximum safety, to precludecontamination of products with broken glass and prevent collection of dirt, product, and debris on lamp surfaces.”FDA Plant Construction and Design- FDA Food Code – Chapter 5, Section 1“Food processing – provide safety-type light bulbs, fixtures, skylights, or other glass suspended over exposedfood in any step of preparation or otherwise protect against food contamination in case of light breakage.”FDA Food Code – Chapter 6 Section, Section 202.11 – Light Bulbs, Protective Shielding“Shielding of light bulbs or fluorescent lamps helps prevent breakage. Light bulbs that are shielded, coated orotherwise shatter resistant are necessary to protect exposed food, clean equipment, utensils, and linens, andunwrapped single-use articles from glass fragments should the bulb or lamp break.”OSHA Hazard Bulletin – 19970715Potential Fire Hazard with Fluorescent Light bulbs with plastic tubeguards – “replace fluorescent light bulbsthat were equipped with protective sleeve coverings and end caps with a shatterproof bulb that is easier to install, in order to eliminate this potential fire hazard.”
©2008 GSS – Glass Surface Systems. All rights reserved.
Illuminating The Future Safely
T5HO Fluorescent LampsGSS is using state of the art new HighTemperature materials to create the perfectsafety coating for use with the new T5HO &T5VHO lamps. GSS is a licensed applicatorof Teflon – the perfect safety coating for usewith the new T5HO high temperature highbay application lamps. Open or closed fixtureapplications. Clear Safety Coating designedto last for the rated life of the lamp.
Compact FluorescentsIncludes Spirals, Twin Tubes, Triple Tubes,Quads, Biax, PL, PLL’s, Globes and CircleLine. GSS's optically clear high heat safetycoating is non-yellowing. FDA, USDA, OSHAand NSF compliant.
Cast-A-Glow LightingGSS has developed a unique solution forfocused and directional lighting. Utilizing astandard fluorescent lamp with an intensi-fied downward directional mirrored surfacewithout high cost reflectors.
Z-Light Zero-LightSelf warming insulated answer for cold roomsand refrigerated areas down to a temperatureof – 20 degrees F – giving a much longer lifeto the lamp, shatterproof protection and higherlumen output.
Blacklight & Blacklight Blue LampsGSS has developed new technology for thesafety coating of BL & BLB lamps. The coatingincorporates the use of UV stabilizing resins thatpermits the passage of UV while still protectingthe shatterproof properties of the coating. Theanswer for safe shatterproof lighting in BugZappers, Fly-Traps and Pest Control. Safetycoated blacklights are safe for use in food pro-cessing and food service areas. Non-Yellowing.
Red and Clear Safety CoatedHeat LampsGlass Surface Systems maintains a large invento-ry of high temperature Teflon coated heat lampsof all sizes, red and clear. Meets current USDA,FDA, NSF and OSHA standards.
PermasleeveThe LOW COST – EASY TO INSTALL –alternative to using tubeguards with endcaps. Permasleeve is a hermetically sealedsystem that eliminates assembly. Includeslamp and UV blocking shatterproof protec-tion. No bacteria buildup and easy to cleandesign. Simple to install design and inspec-tor friendly shatterproof labeling.
Toll Free 877.644.8500 | www.glasscoat.com GSS – Glass Surface Systems
Lighting the WayPrevent and eliminate compliance and liability issues
To learn more about our full line of safety lighting products, visit us at www.glasscoat.com. Inspector Friendly Shatterproof Lighting
Lighting Safety and compliance isimportant to your business. GSS isthe safety coating lamp authoritywith over 35 years experience and aninternational reputation for quality.The company has been at the fore-front in developing new coating tech-nologies, innovative product designsand manufacturing processes thatallow the company to state that “GlassSurface Systems is Your One StopShop for All Your Safety CoatingRequirements.”
Glass Surface Systems has earnedthe respect of major customers world-wide. Glass Surface Systems leadsthe industry in delivering our foodprocessing, restaurants, beverageand pharmaceutical customers withthe ultimate in loss prevention safetylighting products. In this competitiveenvironment everyone at GSS workshard to offer you the best productand excellent service at the bestpossible price.
Fluorescent ProductsT5, T6, T8, T10, T12, T8HO, T12HO, T12VHO. U-Bend 3 inch and 6 inch – T8 & T12 lamps.Fluorescent Lamps and Circle-Line Lamps with the GSS proprietary safety coating designedfor open fixture use. Shatterproof protection safety coating designed to last for the rated lifeof the lamp.
Colored Compact FluorescentsGSS is the source for colored compact fluo-rescent lamps. Exciting standard colors in blue,green, yellow and red. Custom colors are alsoavailable on request. Perfect for restaurants,nightclubs, amusement parks, pubs, point ofpurchase displays. Attention grabbing colorsplus Shatterproof Safety. Answers for all lightingdesigners and engineers.
PAR Floods – BR Floods – Unipar(One Piece) Flood LampsHave problems sourcing safety coated ParLamps and BR Lamps – Call GSS. The GSSproprietary coatings are the answer for hightemperature shatterproof coatings that cantake the heat and stay optically clear for thelife of the lamp. Spots and Floods are available.
We shatterproof all manufacturer's bulbs from around the world
HID – Metal HalideHPS – LPS – Mercury VaporPTFE safety coated high temperature lamps.Metal Halide. 175 watt/250 watt/400 watt/1000 watt. HPS / High Pressure Sodium.Low Pressure Sodium. Mercury Vapor.Clear and Red BR40 heat lamps. PTFEcan take the heat. Chemically resistant.
Incandescent Lamps GSS supplies A15, A19, A21, A23, F15,PS25, PS30, PS35, T10, G25 and G40safety coated with optically clear coatingwith higher temperature durability forextreme heat condition applications. Allwattages are available. All incandescentlamps available.
