Upload
doandan
View
223
Download
5
Embed Size (px)
Citation preview
UNITED DRILLING TOOLS LTD.An ISO 9001-2008 & API Certified Company
UNITED DRILLING TOOLS LTD.An ISO 9001-2008 & API Certified Company
WORLD CLASS QUALITY AND SERVICES AT UNMATCHED PRICESWORLD CLASS QUALITY AND SERVICES AT UNMATCHED PRICES
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
UDT G e n e r a lCatalogue
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
UNITED DRILLING TOOLS LTD. is a leading manufacturer of wire line
& well service equipment, Gas lift equipments, Downhole tools and large
OD casing connectors in the world. The production facilities are specially
adapted to the manufacture of standard precision equipment or special
tools trimmed to customer's particular specifications to international
standards in technical collaboration with reputed manufacturers of
Europe and America. All the equipment can be supplied with most
reliable designs and quality and are very competitively priced as
compared to other suppliers.
Machine shop with CNC and Special-Purpose Lathes, Milling Machines, Drilling Machines, Cylindrical
Grinders etc.
Fabrication, Assembly and Testing Shops.
Design, Research, Development and Engineering Dept.
Quality Assurance Dept. to provide destructive and non-destructive testing such as ultrasonic magnaflux,
X-Ray and dye-penetration tests.
UNITED DRILLING TOOLS LTD. is dedicated to manufacture high
quality products of proven test designs in conformity with international
standards as per ISO 9001 & American Petroleum Institute(API
Licence No. 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-
0010). Also, all raw materials are obtained from reputed suppliers as per
ISO specifications. The manufacturing activities are undertaken by highly
skilled crew under strict control of well-qualified and experienced
engineers and managerial personnel of high professional dedication and
competence. The manufacturing facilities have the most advanced
machines and include four-major sections:
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
ABOUT OURSELVESABOUT OURSELVES
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
Gas Lift Equipments
Fast Make Up High Performance Connectors For Offshore and Onshore Tubulars
Down Hole Tools
Orifice Valves...............................................................................................................10Side Pocket Mandrels....................................................................................................11Dummy Valves.............................................................................................................12Equalizing Valves..........................................................................................................12Latches.......................................................................................................................13Standing Valves........................................................................................................... 13Running & Pulling and Kickover Tools.............................................................................. 14Conventional Casing Pressure Operated Gas Lift Valves......................................................15Conventional Tubing Pressure Operated Gas Lift Valves......................................................16Conventional Check Valves.............................................................................................16Conventional Gas Lift Mandrels.......................................................................................17
Sizes :18-5/8”, 20”, 24”, 26”, 30” & 36”...........................................................................18..................................................................................19..................................................................................20
Lynx, weight set...........................................................................................................21-22Puma, Flush Threaded, 4 turn rotation.............................................................................23
Interchangeable Sleeve Stabilizer....................................................................................24Integral Blade Stabilizer.................................................................................................25Rotary Reamers............................................................................................................26Hard Facing.................................................................................................................27Subs, Lifting Subs & Plugs.............................................................................................28
Wireline Retrievable Gas Lift Valves.................................................................................10
Swift, 1½ Turn Rotation...............Leopard, Less than 1 turn rotation
PAGES
Wireline Winch units
UDT Slimsplit.............................................................................................................. 04UDT Flyline................................................................................................................. 05UDT Surveyline............................................................................................................ 06UDT Truckline.............................................................................................................. 07UDT Landline.............................................................................................................. 08Wireline Accessories......................................................................................................09
PRODUCTS
OUR PRODUCT RANGEOUR PRODUCT RANGE
www.udtltd.com
SPECIAL FEATURES
UDT wireline winches are manufactured for all applications of down hole Production. Reservoir &
Logging Services with following special features to provide a safe smooth & trouble free operation.
Some of these features are available in the UDT winches only providing better operation and safety
upon special request from customer.
Available in various models configurations and designs to suit customer's requirement. Available in Zone-I,Zone-II and Rig safe designs as per customer's requirement. Slick line units designed and built for all sizes of wire such as 0.082", 0.092", 0.108" and 3/16"
diameters. Sturdy pipe cage with compact and heavy-duty base skids and suitable lifting eyes. Line speed available from 3000 ft/min at surface to 900 ft/min. at 20,000 ft. Also, line pull
available from 3000 lbs at surface to 14000 lbs at 20,000 ft. Smooth and reliable hydraulic open and closed loop system as per customer's choice. Level wind feature allows the operator to guide incoming line evenly on the reel. Pressure compensated hydraulic control to maintain the drum R.P.M. at varying loads. Precision RPM control from the operator console. Pressure compensation feature which ensures that line speed will remain same regardless of
changes in load. Isolating valve in the suction line for trouble-free maintenance. Suitable relief valves provided in the hydraulic system to avoid accident. Fail safe break to stop the drum automatically in the event of any failure in the hydraulic system
or engine shut down. Duplex/Triplex roller chain drive for smooth transferring of power to the reel drum. Single lever system for raising, lowering or stopping in the well if required. Positive breaking of
wireline tool is effected when the operation lever is in neutral position. Lock system to keep drum in steady position for long time in lowered condition of instrument. Quick release coupling for easy mounting of hydraulic hoses. Dual brake band to act on both sides of the drum which can be operated by hand or by foot as
the convenience of the operator.
..........
..........
..........
..........
..........
..........
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
WIRELINE WINCH UNITS
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
WIRELINE WINCH UNITS
TYPICAL APPLICATIONS
Reservoir studies. Jarring operation. Logging operation. Production tubing maintenance operation. Pressure/Temperature surveys. Fishing. Paraffin cutting. Swabbing. Sliding sleeve operation. Side pocket mandrel operation. Sub surface beam changing operation.
Fishing operation. Sub surface safety valve setting. Fish recovery operation. Setting & retrieving downhole tools. Running in & pulling out downhole
equipment. Bailing operations Fluid level measurement. Bottom hole pressure/Temperature
survey. Deviation survey.
Hole proof operation.
.............
..........................
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
UDT SLIM SPLIT
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
UDT SLIM SPLIT
4
Skid mounted two piece wireline unit comprising power pack module with 84-120 hp engine and Winch Module with operator cabin and winch system. This is compact , versatile , self-contained wireline winch unit may be supplied in single or dual drum configuration. The system is suitable for Slickline, 7/32” e-line and upto 5/6” cased hole for fishing application. This slim split can be supplied in different configuration as per application requirement
LINE SPEED AND PULL Max line speed at core – 1600 ft/min Max line speed at rim/surface – 2700 ft/min Max line pull at core – 9000 lbs Max line pull at rim/surface – 5000 lbs Minimum line speed 6 ft/min and 3 ft/min optional
DIMENSIONS: double drum Slickline application Power Pack Module : (L) 1.17m , (W) 1.65m , (H) 2.4m Winch Module : (L) 3.35m , (W) 1.50m , (H) 2.4m Weight and dimension may vary depending on application
HYDRAULIC SYSTEM Powerful 375 bar (5,438 psi) closed loop hydraulic system. Capable of Slickline / logging at ultra low speed. Effective fast acceleration for effective jarring. Hydraulic tank – 150 litres
WINCH SYSTEMApplication: Slickline 0.092”, 0.108”, 0.125”, 0.140” and 0.160” Braided line and e-line: 3/16”, 7/32, 5/16” Drum capacity – 25, 000 ft Winch drum is driven by hydraulic motor via planetary gearbox with chain sprocket system. Fail-safe spring return positive brake Over-pull shut-down system: Stop winch rotation on preset desired over pull Equivalent to ASEP Spooling arm or overhead spooling arm
MEASURING HEAD Compact & light weight two or three wheel wrap-around design and no change of wheel is required with the change of wire. Make: Benchmark or equivalent Wire or cable can be removed from measuring head without cutting the wire
DATA RECORDER & DISPLAY Digital data recorder and display that displays and records real time depth tension and line speed, Data can be downloaded to a USB for further data processing: Make: Benchmark or equivalent Mechanical back-up depth counter Back-up Hydraulic line pull indicator: Make: Matin Decker or equivalent
POWERPACK Diesel engine driven hydraulic power pack Engine make: JCB, Perkins, Cummins and Caterpillar as per application requirement Engine rating: 80 hp or 120 hp as per application requirement Battery starter and 12 VDC Alternator Spark Arrestor Over-speed Shutdown valve: Chalwynn
OPTIONAL: Zone-2 rated or Zone-1 rated Atex certified engine Touch Screen winchman panel Air-conditioned operator Cabin 3 pieces configuration Long Cabin Logging System Open loop hydraulics for Slickline application
OPERATOR CABIN Egornomic operator chair and operator console Short or long cabin as per application 2 persons additional seats
Operator Console Hydraulic double lever Joystick for drum rotation, pump and motor displacement control Engine Throttle Control Hydraulic Pressure Gauges Brake Control Drum Selector Spooling arm and side shift control
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
UDT LANDLINE
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
UDT LANDLINE
8
This is a tandem axle combination crane and wireline unit for Slickline, Braided Line and upto 7/32” logging service work applications. It has Integrated swivel operator's control cabin and draw-works compartment. All-weather thermal-insulated cabin with climate-controlled interior ergonomically designed control panel
LINE SPEED & LINE PULL with 0.125” drum Max line speed at core – 900 ft/min Max line speed at rim/surface – 1650 ft/min Max line pull at core – 9000 lbs Max line pull at rim/surface – 5000 lbs Minimum line speed 6 ft/min
CRANE 20 USt Rear Mounted telescopic boom crane with 90 ft boom Rear and front outrigger cylinders
OPERATOR CABIN Ergonomic operator chair and operator console Air-Conditioned operator cabin 2 persons additional seats
FEATURES & BENEFITS Rotating cabin and draw-works compartment External storage compartment Aluminum operator's control cabin section Rear-mounted hydraulic boom crane Capable of being fitted to conventional 6 x 4 or 6x6 truck chassis. 10 Kw hydraulic driven generator Excellent jarring characteristics.
HYDRAULIC SYSTEM Powerful 5,000 psi closed loop hydraulic system. Truck PTO driven hydraulics Capable of Slickline / logging at ultra low speed. Effective fast acceleration for effective jarring. Hydraulic tank – 250 litres
MEASURING HEAD Compact & light weight two or three wheel wrap-around design and no change of wheel is required with the change of wire. Make: Benchmark or equivalent Wire or cable can be removed from measuring head without cutting the wire
DATA RECORDER & DISPLAY Digital data recorder and display that displays and record real time depth tension and line speed, Data can be downloaded to a USB for further data processing. Make: Benchmark or equivalent Mechanical back up depth counter Back up Hydraulic line pull indicator: Make: Martin Decker or equivalent
Operator Console Hydraulic double lever Joystick for drum rotation, pump and motor displacement control Engine Throttle Control Hydraulic Pressure Gauges Brake Control Drum Selector Spooling arm and side shift control
OPTIONS Zone-2 rated with integrated diesel engine driven hydraulic power-pack with Atex certified engine Crane options: 10, 12, 15, 18 USt Touch Screen winchman panel Logging System BOP and Stuffing Box Control with hose reel On board hydrostatic pressure test system up to 15K psi Two-way communication system , Talk-Back
WINCH SYSTEMApplication: Slickline 0.092”, 0.108”, 0.125”, 0.140” and 0.160” Braided line and e-line: 3/16”, 7/32” Drum capacity – 25, 000 ft Winch drum is driven by hydraulic motor via planetary gearbox with chain sprocket system. Fail safe positive brake Over-pull shut-down system: Stop winch rotation on preset desired over pull Equivalent to ASEP Spooling arm or overhead spooling arm
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
WIRELINE WINCH UNITS
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
WIRELINE WINCH UNITS
UNITED DRILLING TOOLS LTD. supplies various wireline accessories used with wire line
units. These accessories are manufactured in our manufacturing plant with quality control
as per ISO 9001 system. These accessories are equal or better in quality to world leading
manufacturers of such equipment and are very competitively priced.
UDT WIRE LINE ACCESSORIES
Wire Clamp is used to pull the wire and create tension in the wire line. It is
available for 0.092” and 0.018” wire.
WIRE CLAMP
"UDT Make" Measuring Meters are available in foot or metric measurement for
accurate measurement of wireline. Various designs are available to suit the
customer requirement as follows:
8-in. Measuring Wheel
12-in. Measuring Wheel
16-in. Measuring Wheel
MEASURING METER
"UDT Make" Hay Pulleys are manufactured as per ISO-9002 quality systems
and available in following sizes.
8-in. Sheave
12-in. Sheave
16-in. Sheave
HAY PULLEYS:
9
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
WIRELINE RETREIVABLE GAS LIFT VALVES
Like the conventional gas lift valves, UDT line of wireline retrievable gas lift valves
include, casing-pressure-operated, tubing-pressure operated (fluid-operated) types
in a full selection of sizes. Each valve has a large dome volume and Monel multi-ply
bellows. Every valve is constructed of stainless steel and monel, selected on the
basis of corrosion resistance and strength. Bellows are silver-soldered by induction
soldering technique and all valves are factory tested for high reliability.
Wireline retrievable gas lift valves provide self-contained packing as a sealing means
in retrievable mandrels and each valve has integral check-valve to prevent flow
between tubing and casing.
TYPE (In) O.D.
(In) PORT SIZES (In)
MIN. MAX. UR-20 1.500 1/8” 1/2" UBK 1.000 1/8” 5/16”
UBK-1 1.000 1/8” 3/8”
TYPE (In) O.D. (In) PORT SIZES (In)
MIN. MAX. URF-10 1.000 1/8” 1/4"
ORIFICE VALVES
“UDT Make” Orifice Valves is a retrievable valve used to install in the side pocket
mandrel prior to circulation. It prevents the pocket damage from abrasive well fluids
while circulating. Efficiency of back check valve provides large flow capacities.
Positive sealing feature of back check valve provides protection from intrusion of
production fluid into casing annulus. Various orifice materials (SS, monel, inconel &
tungsten carbide) available to meet application requirements.
Orifice sizes available for this valve design range from 1/8 through 7/16 inch in 1
inch size and from 1/8 through 51/64 inch in the 1-1/2 inch size, thus making them
suitable for a wide range of operating conditions.
NOMINAL OD(In)
PACKING OD (In) PORT SIZE (In)
UPPER LOWER MIN MAX
1 1-1/32 1-1/32 1/8 7/16
1-1/2 1-9/16 1-132 1/8 51/64
FLUID (TUBING) OPERATED VALVES
CASING PRESSURE OPERATED VALVES
TECHNICAL DATA SHEET
10www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
SIDE POCKET MANDRELS
“UDT MAKE” Side Pocket Mandrels offer the advantage of providing an internal
profile that guides the valve being installed towards the pocket. These mandrels
feature a one piece-pocket, an orienting sleeve for positive kickover tool alignment
in highly deviated well and a tool discriminator to exclude larger slick line tools from
the product area. The pocket is offset to clear the tubing bore which maximize the
flow area and permits passage of tools through the mandrel without meeting
restriction. The external shape allows dual string installations without requiring a
reduced mandrel ID. These mandrels are available in a variety of tubing connections
in both EU and / or premium thread configurations and incorporate all the design
features required by customer. These are available in both orienting and non-
orienting design. Our side pocket mandrels are available for 1.1/2” Gas Lift Valves
for tubing sizes upto 7”OD and for 1” Gas Lift Valves for tubing sizes upto 4.1/2”
OD. These mandrels can accept 1” & 1.1/2 OD side pocket devices.
TECHNICAL DATA FOR 1½-inch OD VALVES
TECHNICAL DATA FOR 1-inch OD VALVES
Tubing OD
8 Rd. EUE DIMENSIONS
Inches A B C D E F
2-3/8 101 4.750 4.00 1.901 1.558 1.496
2-3/8 110 4.750 4.00 1.901 1.558 1.496
2-7/8 100 5.460 4.25 2.347 1.558 1.496
2-7/8 110 5.460 4.25 2.347 1.558 1.496
2-7/8 117.25 5.460 4.25 2.362 1.558 1.496
3-1/2 100 5.960 4.55 2.867 1.558 1.496
3-1/2 110 5.960 4.55 2.867 1.558 1.496
3-1/2 115.5 5.960 4.55 2.875 1.558 1.496
4.00 115 6.470 6.30 3.351 1.558 1.496
4-1/2 112 7.030 6.82 3.833 1.558 1.496
5.00 114 7.480 6.56 4.280 1.558 1.496
5-1/2 116 7.900 7.74 4.650 1.558 1.496
7.00 116 8.380 8.33 5.000 1.558 1.496
Tubing OD
8 Rd. EUE DIMENSIONS
Inches A B C D E F
2-3/8 63 4.250 2.91 1.901 1.027 1.027
2-3/8 73 4.250 2.91 1.901 1.027 1.027
2-7/8 63 4.790 3.50 2.347 1.027 1.027
2-7/8 73 4.790 3.50 2.347 1.027 1.027
2-7/8 78.50 4.750 3.60 2.347 1.027 1.027
3-1/2 64 5.620 4.25 2.867 1.027 1.027
3-1/2 86 5.620 4.25 2.867 1.027 1.027
4.00 90 5.800 5.69 3.351 1.027 1.027
4-1/2 86 6.500 6.33 3.833 1.027 1.027
11
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
DUMMY VALVES
"UDT Make" Dummy Valves is a retrievable dummy valve used to blank off
communication between tubing and casing. In new installations, dummies can be
retained in the mandrels until gas lift valves are required to maintain production.
Then , dummies are pulled and gas lift valves installed by wireline. During the life of
the well, gas lift valves installed above the fluid level can be replaced with dummies
to block off injection gas. They are available in 1 and 1- 1/2 inch sizes.
EQUALIZING VALVES
“UDT Make” Equalizing Valves with integral latches are designed to equalize tubing and casing pressure and/or circulate prior to pulling the valve. They are also available in both 1 and 1-1/2 inch sizes.
TECHNICAL DATA SHEETS
TECHNICAL DATA SHEETS
NOMINAL
OD(Inch)
PACKING OD
UPPER LOWER
1-1/2 1-9/16 1-1/2
1 1-1/32 1-1/32
1-1/2 1-9/16 1-1/2
1 1-1/32 1-1/32
1-1/2 1-9/16 1-1/2
1 1-1/32 1-1/32
NOMINAL
OD(Inch)
PACKING OD (In)
UPPER LOWER
1 1-1/32 1-1/32
1-1/2 1-9/16 1-1/2
12www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
LATCHES
Latches are available in a wide range of designs for use with retrievable gas lift and
circulation valves to be installed in side pocket mandrels and make it easy to install
and remove Gas Lift Valves, very little force is required to operate these latches to
keep the wireline time to a minimum. These are available in 1”-1.1/2” sizes.
STANDING VALVES
Standing Valves are used to allow pressure to be equalized before removal from a
nipple. They are normally used in intermitting or chamber lift wells in the bottom of
the tubing or chamber. This valve can be equalized or retrieved by wireline. They are
offered in sizes 2”-2.1/2”.
SPECIFICATIONS
TECHNICAL DATA SHEETS
PULLING
NECK O.D
(In)
RUNNING NECK
O.D (In)
MAX. O.D (In) SIDE POCKET
ACCESSORY OD
(In)
1.183 0.939 1.795 1.500
1.185 0.936 1.787 1.500
1.375 1.000 1.75 1.500
0.875 0.750 1.335 1
SIZE
(NOM)
DIMENSIONS (In) BOTTOM
THREAD (In) MAX O.D. FISHING
HEAD DIA
FISHING
NECK LENGTH
2” 1.859 1.3/8 3.3/16
1 " NPT
2' 1.859 1.3/8 3.3/16
1 " NPT
2-1/2" 2.297 1.3/8 3.3/16
1 " NPT
2-1/2" 2.297 1.318 3.3/16
1 " NPT
13www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
RUNNING TOOLS
Running Tools are used to install several wireline equipments such as appropriate
latches with valves in side pocket mandrels.
PULLING TOOLS
Pulling Tools are designed to remove subsurface devices, with outside fishing necks, from a well. Featuring collet type dogs with a large latching area, they will withstand repeated impacts and save considerably on dog repair.
ENGINEERING DATA
ENGINEERING DATA
KICK OVER TOOLS
Kickover Tools are used to install the retrieve wireline devices in Side Pocket Mandrels. These are available upon customer's requirement.
NORMAL
SIZE
MAX O.D.
ARMS
RETRACTED
FISHING
NECK O.D.
(Inch)
CONNECTING
THREAD
LENGTH
(Inch)
2-2 1/2 1.859 1.187 15/16-10 29.937
ENGINEERING DATA
MAX O.D. (In) FISHING NECK O.D. (In) PIN THREAD 1.188 – 1.307 1.188 15/16-10 TPI 1.313 – 2.000 1.375 15/16-10 TPI
MAX O.D. (In) FISHING NECK O.D. (In) PIN THREAD
1.422 1.188 15/16-10 TP1 1.859 1.375 15/16-10 TPI
14www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
CONVENTIONAL CASING PRESSURE OPERATED GAS LIFT VALVES
“UDT MAKE” 'AN' Series Valves are charged with nitrogen pressure acting on the bellows. This determines the set pressure of the valve. Nitrogen charged valves are primarily sensitive to casing pressure. The valve is open when the combination of pressures supplied by the casing and tubing exceed the dome pressure. As the casing pressure declines to the valve set pressure, the gas lift valve closes. Since the casing pressure controls the valve operation, the nitrogen charge is reduced in each lower valve to avoid interference with the upper valves. All UDT Series Valves are suitable for either continuous, flow or intermittent lift wells. Features :
Valves are sized to be compatible with most conventional mandrels in service today. Mechanical stops limit bellows travel in both directions. This provides bellows protection and assures long life by keeping bellows travel within design limits. Tungsten carbide balls and seats provide for long wear against abrasive and corrosive fluids. Replaceable floating seats give excellent alignment for positive seal. Large dome volume gives smooth stable valve operation that prevents stem and seat cutting.
·
·
·
··
'AN' SERIES VALVE SPECIFICATIONS
VALVE
TYPE & O.D. (In)
LENGTH
(In)
SEAT
SIZE (In)
BELLOWS
AREA (Sq. In)
AV/AB 1-
AV/AB
TEF
%
AN-15 1.5
14-7/16 12/64 1/4
5/16 3/8
7/16
0.78 0.035 0.062 0.097 0.141
0.192
0.965 0.938 0.903 0.859
0.808
3.6 6.6 10.7 16.4
23.7
AN-10 1.0
12-7/8 8/64 10/64
12/64 1/4
5/16
0.31 0.040 0.062
0.087 0.158 0.246
0.960 0.938
0.913 0.842 0.753
4.2 6.6
9.5 18.7 32.8
AN-81 0.812
14 8/64 12/64
1/4
0.23 0.053 0.119
0.213
0.947 0.881
0.787
5.6 13.5
27.1
AN-62 0.625
10-7/8 8/64 1/64 12/64
0.12 0.101 0.159 0.228
0.899 0.841 0.772
11.2 18.9 29.5
15www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
CONVENTIONAL TUBING PRESSURE OPERATED GAS LIFT VALVES
“UDT MAKE” 'AF' Series gas lift valve is designed to open or close on a fluid load signal. When a predetermined fluid load is reached, the AF Series Valve opens. This allows casing gas to enter the tubing string and lift the fluid to the surface. The AF Series Valve will remain open until the fluid load drops to the closing pressure pre-set on the valve.
The AF Series Valve uses a cross over seat which allows the valve to accept a check and to fit into a conventional type mandrel.
The AF Series Valve is intended for use on wells having a high continuous flow rate. It is also well suited to multiple string completions using the annulus as a common source of injection gas.
Uses existing pressure valve mandrels.
Mechanical stops limit bellows travel in both directions, which prevents overstressing by keeping bellows travel within design limits.
Utilizes standard check valves.
Utilizes full line pressure.
Not affected by temperature. No dome charge is used in the valve, therefore the valve is not affected by temperature.
Features:·
·
·
·
·
.
.
CONVENTIONAL REVERSE-FLOW CHECK VALVES
····
“UDT Make” Conventional Reverse-Flow Check Valves are velocity check valves used with conventional gas lift valves that do not have integral reverse –flow check valves. These check valves protect the casing from backflow through valves that are below the working valves and allow the application of pressure to the tubing for circulation. Reverse –flow check valves require flow to close. As the differential pressure across the check dart of the valve increases, the dart contacts the soft seat and then the hard seat to form a seal and close the check valve.
Made of corrosion resistant material. Dual seats, one metal to metal and one metal to Buna-N. Inconel spring loaded drop providing a normally closed check. Heat treated stainless steel drop with a large flow bypass.
Features:
AF-10 SERIES VALVE SPECIFICATIONS
16
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
GAS LIFT EQUIPMENTSGAS LIFT EQUIPMENTS
CONVENTIONAL GAS LIFT MANDRELS
UDT manufactures a wide range of gas lift mandrels in J-55, L-80 and N-80 grade
tubing. These Mandrels are designed to accept 1” & 1-1/2” Gas lift valves and reverse
flow check valve. The Gas Lift Mandrels are manufactured with heavy duty properly
chamfered steel lug welded to their outside surface so as to protect the valve & check
valve during running in and pulling out operation. The mandrels will be duly heat treated
and stress relieved. All threaded ends shall be provided with suitable thread protectors.
DIMENSIONAL DATA
TUBING
SIZE (In)
VALVE O.D.(In) MAX. RUNNING
O.D.(In)
MAX. RUNNING O.D.
WITH TURNED COLLARS
(In)
1-1/4 EUE 1 2.993 2.914
1-1/2 EUE 1 3.113 3.065
1-1/2 EUE 1 3.263 3.200
2-3/8 EUE 13/16 3.593 3.517
1 3.781 3.705
1-1/2 4.281 4.205
2-7/8 EUE 13/16 4.146 4.043
1 4.334 4.231
1-1/2 4.834 4.731
3-1/2 NUE 13/16 4.750 4.600
1 4.938
1-1/2 5.438
3-1/2 EUE 1 5.062
1-1/2 5.562
17
----
www.udtltd.com
HIGH PERFORMANCE CONNECTORS
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
HIGH PERFORMANCE CONNECTORS
18
These Fast make-up high performance
connectors are being manufactured under
licence from Oil States (UK) Ltd. strictly as per
their designs, manufacturing practices and
quality standards. These connectors are
designed for use in offshore and onshore, where
rig costs and environmental conditions dictate a
need for fast connector make-up combined with
superior performance. These connectors have
following special features.
These connectors are manufactured to the
highest industry standards to assure a
trouble-free installation service. Forging for these connectors are purchased
either BSEN 10204, 3.1 or 3.2 certification.
All critical dimensions are verified with most
precision instruments available. All connectors are phosphated to prevent
corrosion and galling. The latest two and three dimensional finite
element analysis (FEA) techniques are used
to evaluate connector designs. These are tested in Oil States in-house
UKAS accredited testing laboratory to carry
out full scale testing.
1.
2.
3.
4.
5.
Worldwide Leader InConnector Technology
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
The Swift DW2 is a heavy-duty threaded connector for use on exploration and platform casing strings where high strength and pressure integrity are important. Compared to other connectors of similar performance, the Swift DW2 requires very low make-up torque and can be assembled using standard rig tongs.
The Swift DW2 combines a rugged, double-start thread form with a deep stabbing design to eliminate cross threading. The double-start thread reaches full pre-loaded make-up in 1½ rotations. Maximum torque required is between 20,000 and 26,000 ft-lb for a 20” design. Full make-up is visually confirmed by inspecting external indicator faces (see drawing). Sealing is provided by an integral metal-to-metal seal, with an elastomer O-ring secondary seal.
This connectors are also available in drift sizes and internal diameters compliant to API-5CT on customer requirement.
Swift DW2 connectors can be reused multiple times.
Swift connectors are typically made from X60 material. Alternate material options are available on request.
Materials
Metal-seal connector for
conductor and casing
Pre-loaded for fatiguePrimary metal seal, back-up elastomerEnvironmental sealStrength equivalent to casing Reversible and reusableFast twin start, low-torque make-up using rig tongs
19
" For 18.5/8" X 0.435" ,20" X 0.625" , 20" X 0.438" and 30" X 1" connectors DW2IF specifies API compliant connectors for ID & Drift sizes.”All specifications given are based on typical configurations and may be varied to meet customer requirements or as a result of ongoing product development.
DW2IF
Swift Dw2
Model
Swift
HIGH PERFORMANCE CONNECTORSHIGH PERFORMANCE CONNECTORS
7070707070
70
1,7401,9931,8842,1442,4853,551
2,472
7.78.98.49.511.1
12.2
644733751849973
1,188
1.21.3
1.6
2,9173,2672,6833,1503,8505,0005,0005,8335,0005,0005,0005,0005,0005,0005,0005,0005,000
20.122.518.521.726.534.534.540.234.534.534.534.534.534.534.534.534.5
7441,119600901
1,7242,0125,8041,3304,6893,7586,3163,1785,3322,3485,8311,4743,664
5.17.74.16.211.913.940.09.2
32.325.943.521.936.816.240.210.225.3
Burst Pressure Collapse Pressure
www.udtltd.com
SWIFT D 2wW
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
The Leopard combines the advantages of a preloaded, thread-type connector with the rapid make-up desired for offshore operations. It has strength characteristics equivalent to or higher than those of the conductor.
The Leopard is a self-aligned connector with a high-cone angle and is available in twin or four-start thread. When stabbed, the box swallows approximately 90% of the pin lengh. The stabbing guide prevents cross-threading. Full make-up is achieved in less than half a turn with a four-start thread and less than one turn for a two-start thread. The required make-up torque is 45,000 ft-lb for a 30” connection.
To prevent back-off during driving and to permit the connection to transmit torque, integral anti-rotation tabs can be engaged using a hand-held Hilti gun or manual shear tool. Use of the anti-rotation tabs increases breakout torque to as high as 90,000 ft-lb, depending on the number of tabs engaged.
Materials
Leopard connectors are typically made from 70 ksi material for normal operations and 80 ksi for driving applications. Alternate material options are available on request.
LEOPARDThreaded connector for conductor and casing
Self AllignedLow torque make-up with rig tongsLess than one turn make-upIntegral 4 points anti-rotation provisionSuitable for pilingReversible and reusableVisual indication of make-upPreloaded for fatiguesHigh pressure Sealing
Integral anti-rotation requiresusing a Hilti gun to shear the
box guide nose intomachined slots in the pin
20
" For 18.5/8" X 0.435" ,20" X 0.625" , 20" X 0.438" and 30" X 1" connectors DW2IF specifies API compliant connectors for ID & Drift sizes.”All specifications given are based on typical configurations and may be varied to meet customer requirements or as a result of ongoing product development.
SIFSDIF
SDRBSDRB
SDRB
SDRB
6,780 4,910 6.7
36.90
36.90
937
937
32.61
32.06
828
814
6,150
9,10013.19 335 40.5
4,360
6,280
5.9
8.5
Model
Leopard SD/SD 2
70 1,477 6.6 547 0.7 2,900 20.0 744 5.1
70
7070
70
7070
70
70
70
70
7070
70
70
70
70
70
70
70
70
70
13.19 335
3,3003,1503,5002,3002,3002,3002,3002,7002,7003,4003,4003,5003,5003,0633,5003,2503,5003,3003,5003,5003,5003,2503,2503,5003,5003,2503,5003,5003,5003,2503,5003,0003,5003,500
3,5004,000
3,5003,5003,5003,5003,5003,2503,5003,5003,500
22.821.724.115.915.915.915.918.618.623.423.424.124.121.124.1
24.122.4
22.824.124.124.122.422.424.124.122.424.124.124.122.424.1
24.124.1
20.7
27.624.124.124.124.124.124.122.424.124.124.1
86811191306600600700700901
1051172417242011201149755804322137581391162327253180201320132348234819612288499858311243145014883221375836644975580420132348499858311243145032213758
6.07.79.04.14.14.84.86.27.2
11.911.913.913.934.340.022.225.99.611.218.821.913.913.916.216.213.515.834.540.28.610.010.322.225.925.334.340.013.916.234.540.28.6
10.022.225.9
1,721
2,0992,099
2,270
2,4862,486
3,612
4,372
3,971
4,752
5,5285,528
5,940
8,109
6,671
9,816
3,606
4,810
8,112
5,773
9,999
7.7
9.39.3
10.1
11.111.1
16.1
19.4
17.7
21.1
24.624.6
26.430.236.1
29.7
27.443.7
16.0
21.4
36.1
25.7
44.5
633
837837
900
973973
1,362
2,012
2,031
2,031
3,2323,232
3,945
4,587
4,733
6,774
1,360
2,813
4,589
4,096
6,900
0.9
1.11.1
1.2
1.8
2.7
2.8
2.8
4.44.4
5.3
6.2
6.4
9.210.5
1.8
3.8
6.2
5.6
9.410.7
Burst Pressure Collapse Pressure
HIGH PERFORMANCE CONNECTORSHIGH PERFORMANCE CONNECTORS
www.udtltd.com
LEOPARD SD
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
Lynx Weight-set connector
for conductor
SA2 Standard Duty
HD Heavy Duty
HT High Torque
EF External Flush
Hydraulic Remote
Release
Lynx HD is a heavy duty model suited to 1.5” wall pipe,
this utilises a twin load shoulder to increase capacity.
Lynx HDHT is an extremely High Torque Resistant version
of the connector for trawler resistant application.
Lynx HDEF is an extremely Flush version of the connector
for use in Jetting applications.
Lynx is also available with a hydraulic
remote release option for mud line
release application.
21
HIGH PERFORMANCE CONNECTORSHIGH PERFORMANCE CONNECTORS
www.udtltd.com
LYNX EF
LYNX HDHT
LYNX HD
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
LYNX SA2
Materials
The lynx is a robust connector for conductor. It is the simplest type of connector to run, requiring no special tools or personnel. The connector is designed to meet the bending capabilities of the mating pipe body and be piled.
All Lynx models stab easily, self-align axially and assemble under the weight of the joint. When the box is stabbed over the pin, joint weight expands the lock-ring, the abutment faces meet and the lock-ring snaps closed. Full make-up is visually confirmed by inspection of the lock-ring. Lynx connectors disengage by running jacking bolts through the lock-ring to release the pin.
Lynx connectors are typically made from HIHOS, an Oil States developed, high strength, micro-alloy steel (100,000 psi yield). Alternate material options are available on request.
Lynx Weight-set connector
for conductor
Assembly requires no
special tools or personnel
Suitable for piling
Visual indication of make
-up
Anti-rotation resistant
Quick release
Remote release
22
LynxS 2
Model
A
LynxHD
LynxHDHT
All specifications given are based on typical configurations and may be varied to meet customer requirements or as a result of ongoing product development.
HIGH PERFORMANCE CONNECTORSHIGH PERFORMANCE CONNECTORS
www.udtltd.com
LYNX S 2AA
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
Flush Connector for
conductor and pile
Flush OD flush ID
Suitable for piling
Visual indication of
make-up
Elastomer o-ring seals
Low torque, fast
make-up
Pre-loaded
The Puma is a flush-threaded connector for use on exploration and platform drilling operations where size restrictions preclude the use of conventional upset connectors.
The connector is fully driveable and utilises high yield connector material to enable connection to exceed pipe body capacities, whilst using standard pipe grades.
The connection can be installed using conventional casing tongs without any additional requirement for compensated weight release.
Materials
Puma connectors are typically made from HIHOS, an Oil States developed, high-strength, micro-alloy steel (100,000 psi yield). Alternate material options are available on request.
PUMA
23
Model
PUMA2,588
HIGH PERFORMANCE CONNECTORSHIGH PERFORMANCE CONNECTORS
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
DOWNHOLE TOOLSDOWNHOLE TOOLS
INTERCHANGABLE SLEEVE STABILIZERS
FEATURES
“UDT MAKE” Interchangeable sleeve stabilizer comes in two different types : One-
piece body constructions or with a two-piece body with the sleeve blocked in the
middle. Different size sleeve may fit same body. It is composed of a 4145 H AISI
heat treated steel mandrel and a sleeve made of special alloy steel. Hard facing on
the blades can be any of the four different types offered in section "Hardfacing”.
This type of stabilizer is often used in fields where repairs and hard facing of the
blades are not available and is thus a time and money saving tool.
ORDERING INSTRUCTIONS
Hole size and type of body constructionDrill Collar size.Hardfacing chosen for the blade.Connection type and size.
DIMENSIONAL DATA-INTERCHANGEABLE SLEEVE STABILIZERS
Hole size
Range (In)
Sleeve (In) DC size
Range
(In)
Body
Length Blade
Width
Bore
(In)
Centre
Connection
Fishing
Neck
Length (in)
6.1/8–6.3/4 14 2 4.1/8-
4.3/4 2- 2.1/4 2.7/8 IF 20
7.3/8–7.7/8 14 2.1/2 5.1/4-
5.3/4 2.13/16 3.1/2 IF 22
8.1/2–8.3/4 14 2.1/2 6.1/4-
6.3/4 2.13/16 4 IF 22
9.1/2–
14.3/4 14
2.3/4-
3.1/8 7–8.1/4 2.13/16
4.1/2 IF-
6.5/8REG 22
14.3/4-
17.1/2 18 3.1/8 9- 9.1/2 2.13/16 6.5/8REG 22
17.1/2-26 Up to
32 4 9- 11.1/4 2.13/16-3
7.5/8REG-
8.5/8REG 26
24www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
DOWNHOLE TOOLSDOWNHOLE TOOLS
INTEGRAL BLADE STABILIZERS
FEATURES
In order to significantly improve the safety & life span of stabilizers UDT has offered, after
extensive engineering studies and field experience, the Integral Blade Stabilizers. "UDT
Make" integral blade stabilizer has a single body made of 4145 H modified alloy steel fully
heat-treated to 285-341 Brinell hardness and 40 ft lb minimum impact strength. UNITED
stabilizers are available in either near-bit or string-type. Connections are cold-rolled,
phosphatized, coated and equipped with thread protectors. These are gauged to API
standards. “UDT MAKE” Integral Blade Stabilizer are sturdy, rugged and easy to repair and
maintain tools which can be safely used in highly deviating wells for side tracking and fishing
etc. Our stabilizer shall provide 250 to 360 degree hole wall contact and the rib surface shall
be hard faced as described under heading “hardfacing”.
SPECIAL FEATURES
Deep spiral machining to allow maximum mud circulation.Long fishing neck and bottom neck.Wide blades and long wall contact to increase wear resistance and wall contact.
DIMENSIONAL DATA – INTEGRAL BLADE STABILIZER
Hole Size Range
(In)
DC Diameter
Range (In)
Blade Length
(In)
Blade Width
(In)
Fishing Neck
Length (In)
6.1/8 – 6.3/4 4 1/8 - 4.3/4 10 2 20
7.3/8 - 7.7/8 5.3/4 – 6.1/4 10 2.3/8 24
8.1/2 - 8.3/4 6.1/4 - 7 15 2.3/8 24
9.1/2.97/8 7 - 8 15 2.3/8 26
10.5/8-11 7 - 8 15 3.1/8 26
12-12.1/4 7.3/4 – 9.1/2 16 4 26
14.3/4 - 15 8 - 10 16 4 26
17.3/8 – 17.1/2 8 - 10 21 5 26
22 - 23 9 - 11 21 5 30
24 - 26 9 - 11 24 5 30
25
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
DOWNHOLE TOOLSDOWNHOLE TOOLS
ROTARY REAMERS
CUTTERS:CENTRAL PIN:
CROSS PIN:
BLOCKS:
REAMER CUTTERS
TYPE S:
TYPE M:
TYPE H:
TYPE VH:
"UDT MAKE" 3-point or 6-point construction rotary reamers are designed for
reaming and stabilization in any type of formation. All parts of the tools: central pin,
blocks, locking screws are made of special alloy steel and heat treated. Drilling crews
can easily replace any part in the field without the use of special tools, whether it is a
sealed or non-sealed bearing roller reamer.
Available types are described below. The alloy steel used is carburized and hardened to ensure good
bearing wear characteristics and a slot at the end of the pin will prevent it from
rotating. This pin is driven into the top bearing block as an additional safety to
retain the main pin and cutter. These blocks have very little wear and need to be changed only after
several cutter changes.They also allow to re-size the reamer to a different hole size when using different type
blocks, but retaining the same body and pins.
All types of cutters are made of special alloy steel and fully heat treated. They are
set vertically in the body eliminating drag or sliding on the wall of the hole being
drilled. Milled, machined and with sharp teeth for maximum reaming in soft
formations. Milled, machined and hard faced. Ideal for medium to medium hard
formations. For hard formation, tungsten carbide inserts are recommended to fracture
the formation. For very hard formation and tough drilling conditions this type cutter is
always used.
ROTARY REAMER – DIMENSIONS:
Hole size
range (In)
Three Point
Body OD Max. (In)
Internal Bore
(In)
Cutters OD
(In)
Pins OD
(In)
6 – 6.1/2 5.1/2 1.1/4 2 1
7.1/2 – 8.1/8 7 1.1/2 2.5/8 1.3/8
8.3/8-8.7/8 7.3/4 1.3/4 2.3/4 1.3/8
9.1/2 – 9.7/8 8.3/4 2.1/4 3.1/8 1.3/4
10.5/8 –11.3/8 9.1/2 2.1/4 3.1/4 1.3/4
12 - 12.1/2 10.1/2 2.13/16 4 2.1/4
13.1/2- 13.7/8 11.3/4 2.13/16 4 2.1/4
14.3/4-15.1/4 12.3/4 2.13/16 5 2.1/2
17.3/8-17.1/2 15 3 5.1/2 2.1/2
18.1/2 - 20 16.3/8 3 5.1/2 2.1/2
22-23 19 3 7 3
24 - 26 22 3 7 3
26
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
DOWNHOLE TOOLSDOWNHOLE TOOLS
HARDFACING
Applications and Performances
U-PLOY:
U-FLAME:
U-PIC OR U-SERT:
UDT has developed different types of hardfacings for stabilizer blades, each adapted to a specific use to meet your particular requirement. UDT currently provides a solution to all problems of abrasion linked with drilling operations and equipment through different types of hardfacings.
Stabilizers (U-PLOY W) Satisfactory behaviour in soft formations. Mills ( U-PLOY S): Excellent behaviour thanks to its matrix specially designed to release
worn grains.
Stabilizers : Excellent behaviour even in very hard or very abrasive formations or H2S environment. Adheres well to its support. Sound deposit, without cracks in spite of its extreme hardness.
Protection: Pieces subjected to severe abrasion phenomena in very hard formation (roller cutter edges and hole opener arm).
Stabilizers : Excellent behaviour even in very hard and very abrasive formations. Excellent impact strength, and abrasion and corrosion resistance to H S.
...........
........... ...........
...........
...........
27
2
www.udtltd.com
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
DOWNHOLE TOOLSDOWNHOLE TOOLS
SUBS, LIFTING SUBS AND PLUGS
LIFTING SUBS
LIFT PLUGS
ROTARY SUBS AND KELLY SAVER SUBS
"UDT MAKE" lifting subs can be either tapered or square shoulder types and are made from AISI 4145/4140. They are available in all diameters and lengths.When ordering , specify size and type
Drill collar OD Tool Joint OD Tapered, square shoulder or combination Drill pipe OD Drill collar connection size & type and Bore Pressed or cast steel thread protectors
"UDT MAKE" lift plugs are of heat treated steel alloy. Crown sections are bored out to reduce weight. They are available in all sizes with or without lifting bail. When ordering specify : Drill Collar OD. Drill Collar connection Type & size. Lifting Plate OD and Bore.
Rotary subs and Kelly saver subs an available from “UDT” in al standard diameters. When ordering, please specify on all Subs :
Sub use ( such as Kelly sub, x-over drill pipe to drill collar, x-over drill collar to drill collar, bit sub etc.) so that correct bevel diameter should be given. Overall Length. Largest Diameter and Bore. Size & Type of connection, Pin/box & special joint features , if any. Diameter and Length of the reduced section ( for reduced section subs). Float bore , size & type ( for bit subs ). Stretch or latch on and desired OD of the Protector ( for kelly saver subs with
protector). ......
28
www.udtltd.com
CERTIFICATIONS/ACCREDITATIONS
Designed by: Sumit Attree
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
CERTIFICATIONS/ACCREDITATIONS
www.udtltd.com
UNITED DRILLING TOOLS LTD.
www.unitedrilling.com
UNITED DRILLING TOOLS LTD.
Head Office :
A-22 Phase II, Noida, Distt. Gautam Budh Nagar, U.P 201305 (INDIA)
Tel: +91-120-4221777, 4213490, Fax: +91-120-2462675
E-mail: [email protected]
Works :C-41 Sector 81, Noida, Distt. Gautam Budh Nagar, U.P 201305 (INDIA)
Overseas Presence:
Branch Offices
INDONESIASYRIAU.A.EU.KU.S.A
BARODADEHRADUN
MUMBAINEW DELHIDULIAJANSIBSAGAR
LIC NO 5CT-0565, 5L-0424, 7-1-0393, 19G1-0008, 19G2-0010
AN ISO 9001 CERTIFIED COMPANYCERTIFICATE No. 41952
De
sig
ne
d b
y:S
um
ita
ttre
ePlot No. 129G/25-26, 43-44, NSEZ, Phase-II, Noida-201305 GautamBudh Nagar(U.P.) India
Plot No. 523, New Area Kandla-KASEZ, Gandhidham (Gujarat) INDIA