Unit no. FF55 FLANGE FACING MACHINE Dimensions Length(mm)..................................... : 635 Width(mm)............ : 635 Height(mm)........... : 457 Weight (kg).................................... : 80 Equipment Weight (kg).................. : 27 Lifting/ Transportation...................... : Transport in costumed storage/shipping box Type Description....................................... : Flange facing machine Fabricator........................................ : Climax Model............................................... : FF 5000 Serial no.......................................... : 12684 Mounting (ID / OD).......................... : Internal (ID) Min. gripping dia. pipe (Ø mm)........ : 89 Max. gripping dia. pipe (Ø mm)....... : 457 Min. facing diameter (mm)............... : 127 Max. facing diameter (mm)......... : 609 Flange type:..................................... : FF,RF,RTJ,Hub Tool Travel Post (mm)..................... : 50 Connections Air supply (P@Q)............................. : 1,7 m3/m @ 90 PSI (6,2 bar) Air Motor : 0,89 kW (1,2 Hp) Additional information Equipment / Functions..................... : An intenally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring. Can NOT be used on compact flanges. The FF5000 is a versatile flange facing machine that allows you to face, bevel, and turn pipe, valve, and pump flanges with ease. The twopiece mounting system makes setup and alignment of this machine quick and easy. It allows one operator to easily set up the machine and begin machining in just a few minutes. Quick and Easy Setup & Removal Separate mounting chuck. All centering and leveling is done on the chuck. Loosen one bolt and machine can be removed from the chuck without disturbing alignment or calibration. Feed: Power Radial & Vertical Feed: Automatic, adjustable and reversible Automatic Radial Tool Feed: 0 0.03 inch/rev. in eight increments 0 0.76 mm/rev, in eight increments Automatic Vertical Tool Feed: 0 0.02 inch in eight increments 0 0.51 mm in eight increments Page: 1 of 1

Unit no. FF-55 FLANGE FACING MACHINE · Unit no. FF-55 FLANGE FACING MACHINE Dimensions Length(mm).....: 635 Width(mm).....: 635 Height(mm).....: 457

Download PDF Report

Upload
others
View
8
Download
0

Embed Size (px)

Citation preview

Unit no. FF55

FLANGE FACING MACHINE

DimensionsLength(mm)..................................................................: 635 Width(mm).............................................: 635 Height(mm).............................................: 457Weight (kg)..................................................................: 80Equipment Weight (kg)..................................................................: 27Lifting/ Transportation..........................................: Transport in costumed storage/shipping box

TypeDescription......................................................: Flange facing machineFabricator.......................................................: ClimaxModel............................................................: FF 5000Serial no........................................................: 12684Mounting (ID / OD)..................................................................: Internal (ID)Min. gripping dia. pipe (Ø mm)..................................................................: 89Max. gripping dia. pipe (Ø mm)..................................................................: 457Min. facing diameter (mm)..................................................................: 127 Max. facing diameter (mm).............................................: 609Flange type:..................................................................: FF,RF,RTJ,HubTool Travel Post (mm)..................................................................: 50

ConnectionsAir supply (P@Q).................................................: 1,7 m3/m @ 90 PSI (6,2 bar)

Air Motor : 0,89 kW (1,2 Hp)

Additional informationEquipment / Functions............................................: An intenally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and

counter boring.Can NOT be used on compact flanges.

The FF5000 is a versatile flange facing machine that allows you to face, bevel, and turn pipe, valve, and pump flanges with ease. The twopiece mounting system makes setup and alignment of this machine quick and easy. It allows oneoperator to easily set up the machine and begin machining in just a few minutes.

Quick and Easy Setup & Removal Separate mounting chuck. All centering and leveling is done on the chuck. Loosen one bolt and machine can be removed from the chuck without disturbing alignment or calibration.

Feed:Power Radial & Vertical Feed: Automatic, adjustable and reversibleAutomatic Radial Tool Feed: 0 0.03 inch/rev. in eight increments 0 0.76 mm/rev, in eight incrementsAutomatic Vertical Tool Feed: 0 0.02 inch in eight increments 0 0.51 mm in eight increments

Page:1 of 1