Upload
creatim-rzisnik-perc
View
344
Download
25
Tags:
Embed Size (px)
DESCRIPTION
Unior Mini catalogue EN 2011-2012
Citation preview
Min
i cat
alog
ue 20
11 - 2
012
EN
UNIOR d.d.Kovaka cesta 10
3214 Zree, SloveniaT: +386 3 75 78 100F: +386 3 57 62 643
E: [email protected]: www.uniortools.com
Mini catalogue 2011 - 2012www.uniortools.com
EN
621817
EN
ww
w.c
reat
im.c
om
GuaranteeUNIOR guarantees for all its tools against the defects in material or in production and they will be repaired free of charge when they are used correctly or they will be replaced with presentation of suitable documentation. The guarantee is not valid for the tools which were modified without consent of Unior or if they are worn out or otherwise damaged. It is not possible to put into effect the guarantee for the damages which would result from the use of these tools.
EN
This catalogue is protected by copyright. Reproduction of the full catalogue or reproduction or summaries of parts of the catalogue are only permitted by agreement with Unior d.d.
The product images in the catalogue are purely symbolic and intended to show the current state of the products. Since we are constantly working to improve our products, their appearance and technical speci cations are subject to change. We are not liable for any printing errors
and we apologise for them.
We reserve the right to change prices without prior notice. The Unior General Terms and Conditions of Sale and Supply apply to all transactions.
The prices listed are wholesale prices excluding VAT.
The items with blue color handles are not available for sale in the USA and Canada. Items can be supplied with red color handles.
Mini catalogue
MINI CATALOGUE 2011 - 2012
www.uniortools.com
4 ANG
Special machines
Tourism
Sinter
Forging par ts
Hand tools
5 Mini catalogue
Unior, Joint-Stock Company is one of the largest and most important European producers and exporters
With its five production segments: forging parts,
hand tools, machine tools, sinter and activities in
tourism, the Company has been committed to high
quality, high utilization of own capacities, to pro-
ductivity extension as well as to elevated profit-
ability. The company operates in compliance with
the quality certification system of the International
Standard ISO 9001:2008.
World distribution network
UNIOR d.d.
Kovaka cesta 10 3214 ZREE, Slovenia
T: +386 3 757 81 00F: +386 3 576 26 43E: [email protected]: www.uniortools.com
The rich tradition of tool forging along with the use
of new technological findings and high-quality ma-
terials guarantee long life, while our inventive design
solutions provide the exceptional applicability, ef-
fectiveness, and pleasing appearance of Unior tools.
The aim of the company Unior is to implement
quality systems according to international norms
and guidelines that will lead to achievement of our
goals, to effectiveness, and to success and improve-
ment in all areas of operations.
6Milestones of the Unior corporation
From Styria to the world On the outskirts of the Pohorje Mountains, the first ironworks (foundries) were established in the 18th century. They operated as larger forges, in which land and tradesmens tools were fashioned by hand.
In 1919 the tajerska elezoindustrijska druba (Styrian Iron Industry Company) forging plant, with the shortened name tajerska Zree, was established. It produced forged hand tools for farming, forestry and various other trades.
In 1950 the plant, burned down during the war and partially renovated in the years following the war and bearing the new name of Tovarna kovanega orodja Zree (TKO) came under state ownership. New capacities (tool shop and hand tools mechanical processing plant) comprised the basis for developing two production lines: hand tools and drop forgings.
In the 1970s the plant equipped with a new development strategy also obtained a new name: Unior, tovarna kovanega orodja Zree. The new name was formed from the words Univerzalno Orodje (Universal Tools), by which the company had been known for a long time.
2011
7
In 1997 this successful Slovenian company with stable international partnerships was transformed into the UNIOR, d. d. joint stock company. Already at that time, the company had been operating in accordance with ISO 9001 quality standards.
Infinite enthusiasm gives us the strength to reach milestones Through permanent development while realising the necessity of changes and a competitive advantage we are consistently taking on new challenges with regard to all activities of the company thus ensuring successful operations.
By the 1980s Unior had established its name as an important partner of the European automotive industry, namely as one of the largest European producers of light forgings and as one of the largest European producers of connecting rods for petrol engines. Initial development was enabled by a contract with the Renault concern, on the basis of which a joint-venture plant for the production of forgings was built in Zree. At the same time, Unior developed its production of homokinetic joints and machine tools, initially intended for the companys own needs.
Unior Joint-Stock Company is today one of the largest and most important Slovenian exporters. With it's five production segments company follows the tradition of a high quality and innovation. Commited to high utilization of own capacities, Unior enhances the brand awarness through more than 2400 employers and 32 group companies around the world.
In the mid-1970s Unior began building the Rogla climatic health resort and Olympic centre on Pohorje, and a few years later construction of the Terme Zree spa commenced and with it, the Tourism Programme.
Milestones of the Unior corporation
8 ANG
The affiliation and activities of the UNIOR Group represent the foundations for its international success. Excellence of operations represents the basis for innovativeness in all areas. Through ex-perience and knowledge and own development, UNIOR fulfils the expectations of its custom-ers, employees and owners. The strategy of the Group focuses on permanent development and the improvement of effectiveness and reliability.
UNIOR, as a stable and internationally successful business system, intends to strengthen its posi-tion as a leading developmental supplier of de-manding forgings, sinter parts and components for the automotive industry, become one of the five largest manufacturers of special purpose machines in Europe and the leading tool shop for reshaping tools for sheet metal in Slovenia.
UNIOR has already positioned itself among the top European providers of hand tools and until the year 2010 intends to secure itself the position among five top producers in Europe in terms of market share. UNIOR boosts its reputation and with it the success of its trademark by fulfilling the needs of specific users to whom UNIOR di-rects innovative, qualitative, faultless hand tools adapted to customers needs. It develops novel-ties employing its own knowledge and markets its products using contemporary marketing ap-proaches.
Permanent development has remained the con-stant in the history of the UNIOR forging industry.
Its history reaches back to the first ironworks at Pohorje.
Vision and experience, worthy of trust AMONG THE LEADERS IN EUROPE
CLEAR INSIGHT INTO THE NEXT DECADE
ALMOST A CENTURY OF DEVELOPMENT
99
Certified ISO 9001 : 2000 by
Mini catalogue
International excellenceQUALITY STANDARDS
AWARDS FROM CUSTOMERS
RESPONSIBLE ENVIRONMENTAL MANAGEMENT STAND-
ARDS
SOCIALLY RESPONSIBLE COMPANY
Responsibility to the environment
By setting up an environmental management system according to the requirements of the international standard ISO 14001, the company UNIOR has adopted environmental protection views and legal requirements and taken steps to prevent possible acci-dents and extraordinary situations. The environmental manage-ment programme focuses on reduced use of resources, improve-ments in technological processes and the decrease of negative impacts on the environment.
The objective of the programme is to contribute to the positive economic and environmental condition of our environment.
Excellence through quality
Quality systems according to international norms with pre-scribed guidelines are the guide to achieving objectives, effec-tiveness and success and for improving all areas of operations.
Unior has introduced into its business system and received certi-fication for the following systems:
quality management system in compliance with the re-
quirements of the standard ISO 9001:2008,
environmental management system in compliance with the
requirements of the standard ISO 14001/2004,
quality assurance system for the automotive industry in ac-
cordance with the requirements of the following standards:
- ISO/TS 16949,
- VDA 6.1, VDA 6.4.
CORPORATE RESPONSIBILITY
We are proud of our ability to listen to the needs of the commu-nity, providing moral and financial support to the wider social environment. We are acutely aware of the importance of active and responsible engagement in the wider social environment and seek to help individual organisations and societies by rais-ing awareness and providing funding. The Unior joint-stock company feels an obligation to contribute to the development of the town of Zree through investments and the development of tourism, contributing to the improved quality of its fellow resi-dents and the overall progress and prosperity of the region. Un-ior also sponsors and donates money to initiatives and one-time events hosted by societies and organisations.
The company sponsors and donates money to a number of cul-tural, sporting and charitable projects every year.
10
ANG
Made by Unior Made in Europe
A group of experienced specialists for par-
ticular areas, who each time adjust Uniors
offer to the newest standards and challeng-
es of the international market, is responsible
for the development of the tools.
The quality of materials and production is
subject to testing in extreme working condi-
tions and lasting usage.
Uniors production is efficient and reliable.
Investment in equipment and constant
modernization of production lines, skill and
experience of Uniors workers remains an ir-
replaceable competitive advantage.
Uniors central factory is located in one of
the most beautiful, but also one of the ten-
derest regions of Slovenia. With constant
care for the environmentally irreproachable
production, Unior assures conditions for the
cooperation of two such different branches
as tourism and metal manufacturing indus-
try are.
1111
Mini catalogue
The right tool for the most varied types of craftsmen UNIVERSAL TOOLS
TOOLS FOR SPECIFIC ACTIVITIES
OPTIMUM RATIO BETWEEN QUALITY AND PRICE
In addition to its indispensable universal hand tools, UNIOR consistently enriches its selection of tools designed for indi-vidual groups of craftsmen maintenance personnel, service people, machinists, electrical engineers, electricians, plumbers and other professional users. This special group of tools is also oriented towards craftsmen for the repair and maintenance of bicycles. The latest group of special tools includes special pneumatic tools. All professional users of UNIOR tools are de-lighted with the workshop tools tailored to their needs.
The designs of all tools are based on a complete understanding of the needs of individual users, thus it is not surprising that UNIOR tools ensure a high level of customer satisfaction even for the most demanding of tasks.
A great number of UNIOR tools are patented. They are distin-guished by a well-thought out concept to ensure effective op-eration with as little physical effort as possible, and possess an ergonomic design and a long life. Original implementing solu-tions ensure the exemplary usability of the tools with regard to their purpose and an aesthetic appearance.
A special advantage of UNIOR tools is the optimum ratio between quality and price. The extreme durability and long lives of UNIOR tools are assured through quality materials and strict controls during all stages of production.
12
ANG
Unior Partner ProgrammeThe road to customer satisfaction leads through close cooperation with distributors and wholesale dealers. At Unior, we offer them marketing support in the form of joint fair participations, demonstrations of new prod-ucts, catalogues and specialised brochures. On our website at www.uniortools.com, their end buyers can access detailed information on the individual tools.
We constantly monitor the conditions on individual markets, advise our partners about selecting their sales programmes and form pricing policies together. All information from our partners regarding market feed-
back and buyer preferences is carefully evaluated and taken into account when developing new products.
Unlike hand tool providers without their own produc-tion, Unior provides its partners with competent tech-nical support, the prompt resolution of complaints and the option of developing special tools at the request of a customer.
Throughout the years, the Unior partner network has developed into an effective system based on continued collaboration and mutual trust.
1313
Mini catalogue
UNIOR ergonomics - prote
ct y
our han
ds
High
quality
Guaran
tee
14
ANG
Assortment of toolsSelect the tools onlineUnior's online catalogue makes it easier to order prod-
ucts. Detailed information about products, pieces of ad-
vice and videos of usage are just a few of practical pos-
sibilities of Uniors online catalogue. Prepare your list
of products and send it per e-mail to the nearest Unior
representative or print it and send it per ordinary post.
Unior web site
www.uniortools.com
Outdoor Promotion
15
www.uniortools.com
Pneumatic tools
563 PLUS, 567R PLUS, 592R PLUS, 591 PLUS
Vstavljeno rezilo desetkrat v
eja
vzdr
ljivo
st!
Dreieckig
er Klinge dreifach Lebens
dauer
des
Wer
kzeu
ges!
Inserted blade 10 times great
er
dur
abili
ty!
Osobn
o form
owane ostrze - 10-cio k
rotnie
wy
sza
trw
ao
PLUS Tin Snips are the first shears with a separately inserted blade, enabling easier and faster cutting of sheet metal. The blade is harder than the shears themselves, enabling a better force transmission. The cut with only one point of tangency the blades come together in one point only - additionally increases cutting efficiency. Plus Tin Snips come in different shapes Universal Tin Snips, Pelican Tin Snips, Pelican Tin Snips with Spring and Pelican Lever Tin Snips. These tin snips are intended for professional users, especially for roofers and other craftsman.
Advantages: Insertedbladehardness64HRC
Fasterandmorecomfortableuse
10timesgreaterdurability
Broaderrangeofuse
Longerworkinglife
Ergonomicallydesignedhandlesforfasterandeasieruse
PLUS TIN SNIPSwith inserted blade
Smooth cutting through challenging surfaces.
563 PLUS, 567R PLUS, 592R PLUS, 591 PLUS
Advantages: Inserted
Faster
10 times
Broader
Longer
Ergonomically
with inserted blade
Zaitni evlji za varno i
n udo
bno
delo
!
Arbeitsschuhe fr sicher u
nd w
ohl A
rbei
t! S
afety shoes for safe and co
m
fort
wor
k!
Bu
ty ochronne - dla bezpieczenstwa
i kom
fort
u p
racy
SAFETY SHOESconformant to European standards
Advantages: 200Jouletoecapprotection
Punctureresistant
Anti-static
Oilandchemicalresistant
Shockabsorbers
Unior safety shoes are designed to fit the needs of the user, who should find them comfortable even after several hours of wear. Thus, at first gla-ce, they look more like hiking shoes than like work footwear. But looks can be deceiving. Their sporty outside conceals protection features that have in the past prevented many work-related accidents - the shoes have an anti-slip sole; the toes are protected by a steel toecap; a steel plate is inserted into the mid sole, offering punc-ture protection; the heel part features shock absorbers; the sole is acid resistant, the entire shoes are oil resistant. A special line of water repellent shoes is also available.
Safety and comfort go hand in hand.
1800, 1800 L, 1805, 1805 L
conformant to European standards
Advantages: 200 Joule
Puncture
Anti-static
Oil and
Shock
EuroVISION
Izjemna funkcionalnost in m
oder
na o
blik
a!
SLO
Nu
merous functions and m
oder
n de
sig
n
ANG
The EuroVISION tool carriage series is the latest addition to Unior prod-uct range. The carriage is distinguished by its functionality and modern design, which follows the latest trends. In this con-text, Unior has developed a drawer handle, which can be gripped from the top side, making the tools in the drawer much easier to access. Large 125 mm di-ameter wheels ensure mo-bility, stability and safety. A broad range of accessories enables users to adapt the final version of the carriage to fit their requirements.
EurOVISION TOOL CArrIAGE
Advantages: SpecialANTI-SLIPcoveringoffersdamageprotection
forthedrawer
ANTI-SLIPcoveringoffersdamageprotection forthecoverplate
Higherqualityball-bearingslides
Durable125mmdiameterwheelswithasafetybrake enablemobilityandstability
Highqualityandfunctionallydesigneddrawers
Lacquercoated
For the most demanding users.
Izjemna funkcionalnost in m
oder
na o
blik
a!
SLO
Nu
merous functions and m
oder
n de
sig
n
ANG
UN
IOR
ergonomics - protect
your
han
ds
protect your hands ergo
nom
ic
t y
our
han
ds
ergonomic
rgo
UN
IOR
ergonomics - protect
your
han
ds
UN
IOR
ergonomics - protect
your
han
ds
www.uniortools.com
EN
Bike tools 2011/12
Pneumatic toolsPneumatic toolsPneumatic tools
www.uniortools.com
Workshop equipmentWorkshop equipmentWorkshop equipmentWorkshop equipmentMeasuring tools
www.uniortools.com
Measuring toolsMeasuring toolsMeasuring toolsInsulated tools
www.uniortools.com
TOOL CA
Advantages: Advantages: Special
for
ANTI-SLIP for
Higher
Durable enable
High
NNNu
merous
514 BI
Weltes B
enu
tzungsgebiet eine Zange, 7 v
er
schi
eden
e F
unk
tione
n!
Multi-purp
ose use one pair of pliers f
or 7 d
iffer
ent t
ypes
of w
ork.
Uniw
ersalne zastosowanie - jednymi szc
zypc
ami 7
czy
nno
ci
Venamenska uporaba z enimi kle
ami 7
razl
ini
h o
prav
il!
The electricians multifunctional pliers are made from special composition steel. Their advantage is their multi-purpose use, and since one pair of pliers can be used for 7 different types of work, the change of pliers during work is not necessary. The pliers are especially useful for electricians. They can be used for bending rings for screws, crimping insulated spade terminals, crimping cable terminals, stripping off insulation and gripping sensitive objects, itc.
Advantages: 7differentfunctions
Multi-toothedjaw
Ergonomicallyshapedhandle
Extrastronggrip
Highdurability
ELECTRICIANS MULTIFUNCTIONAL PLIERS
One tool for the wide range of operations.
Wrenches
Sockets with
accessoriesPliers
Insulated toolsPlum
bing toolsShears
Screwdrivers
Hammers, punches
and chiselsPullers
Measuring tools
Workshop equipm
entPneum
atic toolsAdditional hand tools
Set of toolsAutom
otive toolsTools for bicycle service
High quality
Guarantee
Hand tools programm
Hand tools programm
1672/2
1621/1bi
1621/1Abi
1607/4
1661/4
1661.1/4p
1662/4
1671.2/4
1671.1/4
1671.3/2bi
1610/2
1613/2bi
1695.1
1695.1AR
1695.3
1695.4
701A
1608/2bi
1609/2bi
Toolsfordrives
1672/2
1621/1bi
1621/1Abi
drivesdrives
1682.1
1680/4
1618/2dp
1692/4
1615/4
1683/4
1616/4
1681/4
1681.1/4
1682/4
Frameandforktools1682.1
1680/4
Frame
tools
ToolsToolsfor
fordrivesdrives
1621/1Abi
1607/4
1661/4
1661.1/4p
1642/2dp
1642.1/2p
1601
584/2polly
1691
1690/1
1688
1689
1635/2p
Wheelsettools
Frame
Frame
tools
ToolsToolsfor
for
1680/4
1618/2dp 1684 1693
Multifunctiontoolsandsets
1691
1690/1 toolstools
Tools
Multifunction tools
Tools for drives
Frame and
fork tools
Wheel set tools
MASTER TOOLS FOR
SIMPLE AND FOR DEMANDING
BICYCLE REPAIRS
From head cup to pedal
From fram
e to most hidden details
For safe and reliable bicycle maintenance
Use U
nior Hand Tools.
Product catalogue
Frame
Frameand
Tools
1691
1690/1
1688
Wheel
Wheelset
settools
Frame
Frameandand
forkfork
toolstools
Tools
1693
setssets
Multifunction
Multifunction
Product catalogueProduct catalogueProduct catalogue
www.unio
r-bike.com
www.unio
rtools.com
UN
IOR ergonomics - prot
ect y
our
han
ds
protect your hands
ergo
nom
ic
t you
rh
and
s
ergonomicrgo
UN
IOR ergonomics - prot
ect y
our
han
ds
UN
IOR ergonomics - prot
ect y
our
han
dsEuropean m
anufacturer of hand tools
since 1919
Wrenches
Sockets with accessories
Pliers
Insulated tools
Plumbing tools
Shears
ScrewdriversHammers, punches and chisels
Pullers
Measuring tools
Workshop equipmentPneumatic tools
Additional hand toolsSet of tools
Automotive tools
Tools for bicycle service
Hig
h quality
Guarante
e
Hand tools programmCurveddolly-1910
Doublebladespoon-1917
Dripmouldingspoon-1929
Griddolly-1922
Multi-functionscraperwithbladeguard- 1945
Doublesuctionlifter-1944/6
Bodyworktools
BodyworkBodywork toolstools
Maintenance
Suspensioncompressorforshockabsorbersprings-
2051/4
Compressorforshockabsorbersprings,light
version-2052/4
Roller-typestudextractor-2076/1
Quickcouplerpliersforfuelpipes-2079
Springclippliers-2077/2BI SlotholderpliersforOETIKERcollars- 2078 CLICcollarpliers-2080/2BI
toolsMaintenance
MaintenanceWrenches
Sockets withaccessories
Pliers
Tyrelever-300/5Fourwayrimwrench-213/6
Setof1/2impactsocketsforalloywheels-
231/4PCB
Pre-settorquewrenchesforcars-267AToolforsettyresvalvelets-2034/2BI
Wheels,steeringandhubs
Tyre lever 300/5Four213/6
Engine
1/2squaredrive
socketfordieselengine
injectors-2207/2
Alternatorcombination
socket-2209
Timingpulleypuller-
2210/2 Valvesealremoval
pliers-2201/2BI
SACClutchtoolset-
2211
combination
2209
Timing pulley
2210/2 Valve
Strapwrench-205/2
Chainwrench-206/2
Adjustableoil-filter
wrench-1976/2
Lubrificationandfiltration
LubrificationLubrification
and
Lubrification and filtration
Engine
Wheels, steering and hubsM
aintenance
Bodywork
tools
Unior aUtomotive tools for simple and demanding car repairs
Product catalogueProduct catalogueProduct catalogue
www.uniortools.comU
NIO
R ergonomics - protect
your
han
ds
protect your hands erg
onom
ic
t your
hand
s
ergonomicrgo
UN
IOR
ergonomics - protect yo
ur h
ands
UN
IOR
ergonomics - protect yo
ur h
ands
Automotive tools
European manufacturer of hand tools since 1919
Smooth cutting through challenging surfaces. Smooth cutting through challenging surfaces. Safety and comfort go hand in hand. Safety and comfort go hand in hand.
Lacquer coated
For the most demanding users.
Lacquer
For the most demanding users.
www.uniortools.com
596 PLUS
Trostransko rezilo trikrat dalja
ivl
jenj
ska
do
ba!
Triangular Blade Threefold lo
nger
Ser
vice
Lif
e
Dreiseitenschneide dreima
l lng
ere
Sta
ndze
it!
Trzykrotnie duszy czas
u
ytko
wan
ia
The 596 PLUS bol
t
cutters are made o
f drop
forged special too
l steel. The
replaceable jaw is a
djust-
able and has thre
e positions.
As it is induction h
ardened,
it successfully resis
ts wear
and tear, while its
triangular
blade lengthens it
s service life
threefold. The too
l is further
protected from d
amage by a
special shock abso
rber. Han-
dles are made of lac
quered
steel tubes. Their
ergonomic
shape and insulat
ion with
plastic housings en
able
straightforward gu
idance and
proper handling.
Advantages:
Extremestreng
thandminimum
weight
Outstandingre
sistancetothem
aximumforces
generatedduring
cutting
Completeanti
-corrosionresista
nce
Straightforwar
dguidanceandp
roperhandling
Shockabsorbe
rforthepreventi
onofinjuries
BOLT CUTTERS w
ith interchangeab
le
triangular cutting
edges
Long lasting and
extreme cutting
capability.
Mini catalogue
Insulated tools
Electricians Multifunctional Pliers
PLUS Bolt Cutters
Bike tools catalogue
Automotive tools leaflet Measuring tools
Eurovision Tool Carriage
Bike tools leaflet
Workshop equipment
Safety Shoes
Pneumatic tools
PLUS Tin Snips with inserted blade
To order see page 332Beside the general catalogue with the whole
offer of Unior, there are also specialized cata-
logues for pretentious users of bicycle tools,
automotive tools and workshop equipment.
New products of Unior are presented on oc-
casional leaflets.
Catalogues and Brochures
Leaflets
16
ANG
Content
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
44
102
114
118
140
154
166
186
198
204
228
268
278
308
328
Wrenches
Sockets with accessories
Measuring tools
Pliers
Insulated tools
Plumbing tools
Shears
Screwdrivers
Pullers
Hammers, punches and chisels
Workshop equipment
Set of tools
Pneumatic tools
Automotive tools
Tools for bicycle service
Marketing materials
18
D1
D2
xxxxxxxxxxxx
25018,5
243-5
1
6192782027/2
25018,5
243-5
1
360 /no
D1 max.
D2max.
2027/2
/1
/2
/3
/4
/5
/6
/7
/8
CS
CB
PB
MS
PH
PS
FH
CT
ANG
Chrome plated, polished heads
Chrome plated
Nickel plated
Phosphated
Zinc plated
Lacquered
Anticorosive oiled
Other
Pcs in set
Looking up in the catalogue
Code
Tehnical data
Product number
Product name
Article
Yellow field (new product)
Number of items
Code
Dimension
Price
Call local distributor for price
As long as on stock
Meters
Feet
Diameter
Article Number
Volt
Color
Article labelingPackaging
General
Carton set
Carton box
Plastic wallet
Metal stand
Plastic hanger
Plastic stand
Folding holder
Bag
Hub and wheel drum puller
material hook cups: chrome molybdenium
with five extractor hooks
for extracting wheel hubs, up to a hole diameter
of 250 mm Operation: 1. Assemble tool, mount only number of extrac-
tor hooks needed 2. Mount extractor hooks to wheel drum
3. Turn spindle to start pulling wheel drum
This tool is intended for the disassembly of vari-
ous wheel hubs. It is designed for simple and flex-
ible use. With the extractor hooks supplied, the
hubs can be removed with three, four or even five
hooks, depending on the type of hub. Because its
use is extremely flexible due to the five extractor
hooks, the tool is useful for the majority of hub
types up to a diameter of 250 mm.
The tool consists of a spindle, five extractor hooks
and forged hook handle. The handle also has
an additional notch that prevents the extrac-
tor hooks from sliding off the tool during the
assembly or disassembly of the hub. The strong
construction allows safe and long-term use with
high loads. We recommend that you do not use
pneumatic hammers!
19
kg
Mini catalogue
socket 4-point
socket 6-point
socket 12-point
internal TX profile
internal TX profile with hole
internal TXP profile
internal ZX profile
internal ribe profile
internal PH profile
internal flat profile
internal PZ profile
HEXAGON profile internal 4-point socket
3/8 internal 4-point
3/4 internal 4-point
1/4 internal 4-point
1/2 internal 4-point
1 internal 4-point
1. 1/2 internal 4-point
3/8 point
3/4 point
1/4 point
1/2 point
1 point
1. 1/2 point
wire diameter in mm
tube diameter in mm
tube diameter in Inches
tube max diameter in mm
HEXAGON profile with hole
HEXAGON profile
square file or square part
screwdriver profile, flat
screwdriver profile, crosstip, PH
screwdriver profile, double crosstip, PZ
flat file
half round file
round file
three angle file
LIFE profile
TX profile
internal lock ring pliers
for circlips to DIN 471 and DIN 983 for shaft diameterfor circlips to DIN 472 and DIN 984 for shaft diameter
spoon scraper
three angle scraper
force in N
hammer weight in grams
gear rate
max
min
wire max diameter in mm
outer dimension in mm
dimension in Inches
torque in Nm
torque in lbf.ft
dril mm
inlet threat in mm
weight in kg
TX profile with hole
ZX profile
TXP profile
ribe profile
profile SDS PLUS of chisel clamping partprofile SDS MAX of chisel clamping part
nut form for hook wrench
nut form for hook wrench
special protect profile
VDE DP double layered - double coloured insulation
article with VDE certificate
article made according to GS standardsarticle made according to VDE standards
motor
break angle
magnet force in kilograms
for paper
5spline
Legend of symbols used in catalogue
Dimensions
Profiles
Otherstripping jaws
jaws form
flat jaws
form of cutting jaws
form of cutting jaws
form of cutting jaws
form of cutting jaws
round jaws
straight half round jaws
external lock ring pliers
20
UN
IOR
ergonomics - protect
your
han
ds
protect your hands ergo
nom
ic
UN
IOR
ergonomics - protect
your
han
ds
UN
IOR
ergonomics - protect
your
han
ds
cs - protect
y
ds
t y
our
han
ds
micoo
rrgrgoooocs -mic
rrr
Wrenches
LIFE profile
Main advantages of LIFE profile fastens surface screws, screw-nuts in just six
points protection of screws and screw-nuts edges faster position and comfortable work suitable also for damaged screws, screw-nuts
Long lifespanThe wrenches are made of high quality
chrome-vanadium steel with a greater
density at the points of the highest
pressure, and such dimensioning
and manufacture only increase their
extreme power and durability.
Innovative designState-of-the art design makes Unior
wrenches guarantee an accurate and
efficient transfer of force to screw
heads and nuts.
Safety cutWith their special safety cut, the
wrenches prevent the damaging of
corners and edges of the screws and
nuts by distributing the force evenly
over the surface away from the outer
lines of the nut or screw head instead
of directly on the edges.
Open end wrenches Combination wrenches Offset ring wrenches
Slogging wrenches
Hexagon wrenches
Adjustable wrenches
Filter and oil drain plugs wrenches
T-handle wrenches
Hook wrenches
21
1. Cutting: on a machine, flat steel is cut into required shapes; the accuracy of the cut ensures mini-mal consumption of quality material.
3. Trimming: the removal of flash (waste material squirting out of the thin seams between the die cov-ers under the force of the forging hammer) is carried out by a special trimming machine; the weight of the trimmings to be removed in order for the forging to acquire the desired shape always has to be lesser than the weight of the forged part.
2. Forging: through forging procedures performed on the renowned LASCO machines, the toughness of combined wrenches is enhanced. By the employment of suitable forging techniques we are able to maintain the appropriate fibre orientation (the same as in the rolled blanks), which is of key importance in products exposed to heavy, dynamic loads (e.g. Unior wrenches).
4. Perforation:following the forging and trimming phases, perforations are made in the workpiece by punching or cutting. This procedure can be carried out either on hot or cold workpieces.
5. Burring and grinding: with the help of mechanical and chemical substances, the rough edges on the forg-ings are removed by burring machines and subsequently the wrenches are passed over grinding machines to be contoured. The surface and the edges of the wrench are thus smoothed and rounded.6. Machine marking and bending: in conformity with Set standards, each product is impressed with its appropriate mark; next, the ring of the wrench is offSet as per relative requirements.
7. Broaching:in broaching, material is removed in a single pass by a successive action of a number of cutting blades incorporated in a broach. In the production of Unior wrenches, the internal teeth of the ring are made using a MAE broaching machine.
8. Tempering:tempering by heating and cooling is designed to improve the grain flow of the steel and thereby increase the toughness of the wrench at the desired points; this heat treatment process grants the Unior wrenches a long lifespan and resistance to high loads and pressure.
9. Sanding and polishing:various abrasive substances are blasted onto the surface of the wrenches by means of compressed air. The abrasives burr the surface, while at the same time imparting to it a certain asperity, important for the subsequent application of a suitable galvanic (protective) coating. In certain variants, the head surfaces of the wrench are polished to present a pleasant final appearance.
10. Chrome plating:wrenches are coated with a thin, solid layer of chrome dioxide to protect them from cor-rosion, wear and scratches; metal chrome is used in the alloying of steel and metal plate, while also giving the wrench an attractively shiny visual aspect.
THE MAIN COMMANDMENTS TOWARDS PERFECTION
All technological processes of Unior hand tools manu-facturing are carefully designed, rigorously checked and conform to demanding quality certifications. In addition to the best processes, the excellence of the final products is guaranteed by employment of superior quality materials and machines.
The forging of oblong products, such as wrenches, requires several characteristic preparatory and inter-mediate operations before the forgings can acquire their final shape. Initially, in the forging of wrenches blanks are cut from strip by means of special blades. The cut up blanks are then straightened with one or
two blows and subsequently forged to form. Since the section of the cutting blades can be Set with great precision, the consumption of selected quality material is minimal.
10 main steps out of 24
A special procedure for the manufacture of a combination wrench 24
22
EN
L B1 B2 A
603316 4 x 4.5 100 13.6 13.6 3.4
603317 4 x 5 100 13.6 13.6 3.4
603318 5 x 5.5 100 13.6 13.6 3.4
600059 5 x 7 121 14.4 16.4 3.4
600060 5.5 x 7 121 14.4 16.4 3.4
600061 6 x 7 121 14.4 16.4 3.4
600062 7 x 8 140 18.4 22.9 3.7
600063 7 x 9 140 18.4 22.9 3.7
600064 8 x 9 140 18.4 22.9 3.7
600065 8 x 10 140 18.4 22.9 3.7
600066 9 x 10 159 22.7 24.2 4.5
600067 9 x 11 159 22.7 24.2 4.5
600068 10 x 11 159 22.7 24.2 4.5
600069 10 x 12 172 26.2 29.2 4.5
600070 10 x 13 172 26.2 29.2 4.9
600071 10 x 14 172 26.2 29.2 4.9
600072 11 x 13 172 26.2 29.2 4.9
600074 12 x 13 172 26.2 29.2 4.9
600075 12 x 14 172 26.2 29.2 4.9
600076 13 x 14 192 31.2 33.2 5.4
600077 13 x 15 192 31.2 33.2 5.4
603846 13 x 16 192 31.2 33.2 5.4
600078 13 x 17 200 31.2 37.7 5.7
600079 14 x 15 192 31.2 33.2 5.4
600080 14 x 17 200 31.2 37.7 5.7
600081 15 x 17 206 35.7 37.7 5.7
600082 16 x 17 206 35.7 41.5 5.7
603121 16 x 18 213 35.7 41.5 6.2
600083 17 x 19 223 39.5 41.5 6.2
600084 17 x 22 223 39.5 41.5 6.2
600085 18 x 19 223 39.5 41.5 6.2
603847 18 x 21 223 39.5 46 6.2
600086 19 x 22 232 43.5 46 6.7
600087 19 x 24 232 43.5 46 6.7
600088 20 x 22 232 43.5 46 6.7
600089 21 x 23 249 46 52 7.2
600090 22 x 24 249 46 52 7.2
600091 22 x 27 249 46 52 7.2
600092 24 x 26 265 51.8 55.3 7.7
600093 24 x 27 265 53.8 55.3 7.7
600094 24 x 30 279 53.8 58.8 8.2
600095 25 x 28 279 62.8 58.8 8.2
600096 27 x 29 309 62.8 67.3 9.2
600097 27 x 30 309 62.8 67.3 9.2
600098 27 x 32 309 62.8 67.3 9.2
600099 30 x 32 309 62.8 67.3 9.2
603848 30 x 34 315 62.8 68.8 9.6
602593 30 x 36 319 62.8 78.8 9.6
600100 32 x 36 327 68.8 78.8 9.6
L
A
B2B1
110/1
Open end wrench material: chrome vanadium surface finish: chrome plated according to EN12540 polished head drop forged, entirely hardened and tempered made according to standard ISO 10102 (only metric dimension)
L B1 B2 A
600101 34 x 36 327 68.8 78.8 9.6
600102 36 x 41 360 78.8 86.8 9.6
605549 38 x 42 360 78.8 86.8 9.6
602594 41 x 46 410 86.8 94.8 14.6
602595 46 x 50 460 94.8 103.9 15.6
605348 1/4 x 5/16 121 14.4 16.4 3.4
618658 1/4 x 9/32 121 14.4 16.4 3.4
605349 5/16 x 3/8 140 18.4 22.9 3.7
618656 11/32 x 13/32 159 22.7 24.2 4.5
605350 3/8 x 7/16 159 22.7 24.2 4.5
605351 7/16 x 1/2 172 26.3 29.2 4.9
605352 1/2 x 9/16 192 31.2 33.2 5.4
605353 9/16 x 5/8 192 31.2 33.2 5.4
605354 5/8 x 11/16 206 35.7 37.7 5.7
605355 11/16 x 3/4 223 39.5 41.5 6.2
618657 3/4 x 13/16 232 43.5 46 6.7
605356 13/16 x 7/8 249 46 52 7.2
605357 15/16 x 1 265 51.8 55.3 7.7
605358 1 x 1.1/8 279 53.8 58.8 8.2
605359 1.1/16 x 1.1/4 309 62.8 67.3 9.6
600105 110/1CB 6 - 22 / 8
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
600106 110/1CB 6 - 32 / 12
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32)
600107 110/1CB 6 - 41 / 13
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32, 36 x 41)
611018 110/1CB 6 - 27 / 10
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27)
605530 110/1CB 1/4 - 3/4 / 8
110/1 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4)
605531 110/1CB 1/4 - 1.1/4 / 12
110/1 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1, 1 x 1.1/8, 1.1/16 x 1.1/4)
110/1CB
Set of open end wrenches in carton box
23
602844 110/1CS 6 - 22 / 8
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
110/1CS
Set of open end wrenches in carton box
615465 110/1CT 6 - 22 / 8
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22), CT110
110/1CT
Set of open end wrenches in bag
A B
615480 430 275
CT110
Empty bag Dimension 430 x 275, for article 110 in 125 velcro fastening is used for easy opening and closing the closing belt is not needed
600108 110/1PB 6 - 17 / 6
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17)
600109 110/1PB 6 - 22 / 8
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
110/1PB
Set of open end wrenches in plastic wallet
610835 110/1PH 6 - 22 / 8
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
110/1PH
Set of open end wrenches on plastic hanger
605528 110/1MS 6 - 32 / 12
110/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32), 977/1
605532 110/1MS 1/4 - 1.1/4 / 12
110/1 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1, 1 x 1.1/8, 1.1/16 x 1.1/4), 977/1
110/1MS
Set of open end wrenches on metal stand
24
EN
L B1 B2 A
603319 4 x 4.5 100 13.6 13.6 3.4
600110 4 x 5 100 13.6 13.6 3.4
603320 5 x 5.5 100 13.6 13.6 3.4
600111 5 x 7 121 14.4 16.4 3.4
600112 5.5 x 7 121 14.4 16.4 3.4
600113 6 x 7 121 14.4 16.4 3.4
600114 7 x 8 140 18.4 22.9 3.7
600115 7 x 9 140 18.4 22.9 3.7
600116 8 x 9 140 18.4 22.9 3.7
600117 8 x 10 140 18.4 22.9 3.7
600118 9 x 10 159 22.7 24.2 4.5
600119 9 x 11 159 22.7 24.2 4.5
600120 10 x 11 159 22.7 24.2 4.5
600121 10 x 12 172 26.2 29.2 4.5
600122 10 x 13 172 26.2 29.2 4.9
600123 10 x 14 172 26.2 29.2 4.9
600124 11 x 13 172 26.2 29.2 4.9
600126 12 x 13 172 26.2 29.2 4.9
600127 12 x 14 172 26.2 29.2 4.9
600128 13 x 14 192 31.2 33.2 5.4
600129 13 x 15 192 31.2 33.2 5.4
603849 13 x 16 192 31.2 33.2 5.4
600130 13 x 17 200 31.2 37.7 5.7
600131 14 x 15 192 31.2 33.2 5.4
600132 14 x 17 200 31.2 37.7 5.7
600133 15 x 17 206 35.7 37.7 5.7
600134 16 x 17 206 35.7 41.5 5.7
603122 16 x 18 213 35.7 41.5 6.2
600135 17 x 19 223 39.5 41.5 6.2
600136 17 x 22 223 39.5 41.5 6.2
600137 18 x 19 223 39.5 41.5 6.2
603850 18 x 21 223 39.5 46 6.2
600138 19 x 22 232 43.5 46 6.7
600139 19 x 24 232 43.5 46 6.7
600140 20 x 22 232 43.5 46 6.7
600141 21 x 23 249 46 52 7.2
600142 22 x 24 249 46 52 7.2
600143 22 x 27 249 46 52 7.2
600144 24 x 26 265 51.8 55.3 7.7
600145 24 x 27 265 53.8 55.3 7.7
600146 24 x 30 279 53.8 58.8 8.2
600147 25 x 28 279 62.8 58.8 8.2
600148 27 x 29 309 62.8 67.3 9.2
600149 27 x 30 309 62.8 67.3 9.2
600150 27 x 32 309 62.8 67.3 9.2
600151 30 x 32 309 62.8 67.3 9.2
603851 30 x 34 315 62.8 68.8 9.6
L
A
B2B1
110/2
Open end wrench material: chrome vanadium surface finish: chrome plated according to EN12540 drop forged, entirely hardened and tempered made according to standard ISO 10102 (only metric dimension)
L B1 B2 A
602596 30 x 36 319 62.8 78.8 9.6
600152 32 x 36 327 68.8 78.8 9.6
600153 34 x 36 327 68.8 78.8 9.6
600154 36 x 41 360 78.8 86.8 9.6
605550 38 x 42 360 78.8 86.8 9.6
602597 41 x 46 410 86.8 94.8 14.6
602598 46 x 50 460 94.8 103.89 15.6
605458 1/4 x 5/16 121 14.4 16.4 3.4
605459 5/16 x 3/8 140 18.4 22.9 3.7
605460 3/8 x 7/16 159 22.7 24.2 4.5
605461 7/16 x 1/2 172 26.3 29.2 4.9
605462 1/2 x 9/16 192 31.2 33.2 5.4
605463 9/16 x 5/8 192 31.2 33.2 5.4
605464 5/8 x 11/16 206 35.7 37.7 5.7
605465 11/16 x 3/4 223 39.5 41.5 6.2
605466 13/16 x 7/8 249 46 52 7.2
605467 15/16 x 1 265 51.8 55.3 7.7
605468 1 x 1.1/8 279 53.8 58.8 8.2
605469 1.1/16 x 1.1/4 309 62.8 67.3 9.6
600155 110/2CB 6 - 22 / 8
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
600156 110/2CB 6 - 32 / 12
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32)
600158 110/2CB 6 - 41 / 13
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32, 36 x 41)
603345 110/2CB 6 - 27 / 10
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27)
605533 110/2CB 1/4 - 3/4 / 8
110/2 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4)
605534 1/4 - 1.1/4 / 12
110/2 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1, 1 x 1.1/8, 1.1/16 x 1.1/4)
110/2CB
Set of open end wrenches in carton box
602846 110/2CS 6 - 22 / 8
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
110/2CS
Set of open end wrenches in carton box
25
615466 110/2CT 6 - 22 / 8
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22), CT110
110/2CT
Set of open end wrenches in bag
600159 110/2PB 6 - 17 / 6
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17)
600160 110/2PB 6 - 22 / 8
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
110/2PB
Set of open end wrenches in plastic wallet
610836 110/2PH 6 - 22 / 8
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
110/2PH
Set of open end wrenches on plastic hanger
605529 110/2MS 6 - 32 / 12
110/2 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32), 977/1
605535 110/2MS 1/4 - 1.1/4 / 12
110/2 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1, 1 x 1.1/8, 1.1/16 x 1.1/4), 977/1
110/2MS
Set of open end wrenches on metal stand
L B A
618370 6 74 16 6.9
618331 7 74 16.1 6.9
617801 8 108 21 7
621575$ 9 109.5 24.5 7.5
612175 10 109.5 24.5 7.5
612176 11 113 26 7.5
612177 12 127 28 8
612178 13 131 30.5 8.5
612179 14 143 33 8.5
612180 15 150 35 9
621576$ 16 158 40 10
612181 17 158 40 10
621577$ 18 173 44 11
612182 19 173 44 11
618333 20 180 46.4 12.2
619201 21 183 48.8 12.5
612183 22 198 49 13
618335 23 215 52.8 13.1
612184 24 224 56 14
621578$ 26 235 59 15
617802 27 235 59 15
621579$ 28 267 66 15.8
618336 30 267 66.1 15.8
618337 32 283 71.4 17.6
LA
B
110/2VDEDP
Insulated single open end wrench material: chrome vanadium head: chrome plated according to EN12540 double layered - double coloured insulation enable additional safety if second layer is visible, replace your VDE tool with the new one. controled with electrical test made according to standard EN60900
26
EN
612676 110/2VDEDPCB 10 - 24 / 10
110/2VDEDP (10, 11, 12, 13, 14, 15, 17, 19, 22, 24)
110/2VDEDPCB
Set of insulated open end wrenches in carton box
L B1 B2 A1 A2
602081 6 x 7 97 15 17 3 3.2
602082 8 x 10 115 18 22 4.2 4.2
613222 10 x 11 122 23 24.5 5 5
605045 10 x 12 128 22 28 5 5
603611 10 x 13 137 26 28.5 5.2 5.2
602083 11 x 13 132 26 28.5 5 5.4
602084 12 x 14 146 28 32 5.5 5.5
612773 13 x 14 146 28 32 5.5 5.5
602085 13 x 15 152 28 32 6 6
603134 13 x 17 158 30 35 6.5 6.5
612774 14 x 15 137 26 28.5 5.4 5.4
602086 14 x 17 158 30 35 6.5 6.5
602087 17 x 19 170 35 40 7 7
602088 19 x 22 197 42 48 8 8
605921 21 x 23 217 46 51 9 9
L
B2B1
1A2A
112/2
Open end wrench material: special tool steel surface finish: chrome plated according to EN12540 made according to standard DIN 895 drop forged, entirely hardened and tempered
L B A
618623 3.2 75 10 2
618624 3.5 75 10 2
618625 4 75 10.5 2
618626 4.5 75 10.5 2
618627 5 85 12 2
618628 5.5 85 12.2 2
618629 6 85 12.5 2
618630 7 95 14.5 2
618631 8 95 16.5 2
618632 9 110 19 3
618633 10 110 21 3
618634 11 110 23.5 3
618635 12 125 24 3
618636 13 125 27.5 3
618637 14 125 28 3
618638 15 135 30 3
618639 16 135 32 3
618640 17 135 34 3
618641 7/32 85 12.2 2
618642 11/32 110 19 3
618643 9/32 95 14.5 2
114/2
Small double open ended wrench ELECTRIC material: special tool steel surface finish: chrome plated according to EN12540 entirely hardened and tempered
619287 114/2PB 3.2 - 14 / 15
114/2 (3.2, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14)
114/2PB
Set of small double open ended wrenches ELECTRIC
27
L A B
615262 10 104 4.5 22
620207$ 12 123 5 26
615263 13 132 5.4 28
615264 17 157 5.9 36
615265 19 170 6.9 40
615266 21 195 7.9 46
615267 22 195 7.9 46
615268 24 218 8.7 50
615269 27 240 9.7 56
615270 30 265 10.7 62
615271 32 275 11.7 66
615272 34 275 11.7 70
615273 36 295 12.5 74
615274 38 295 12.5 74
615275 41 335 13.5 84
615276 46 365 14.5 94
615277 50 400 15.5 102
615278 55 475 16 110
615279 60 475 17 120
615280 65 550 18 130
615281 70 550 19 140
615282 75 620 20 150
615283 80 620 21 160
615284 85 665 22 170
615285 90 740 23 190
615286 95 740 23 190
615287 100 800 24 200
L
B
A
117/4
Single open end wrench material: chrome vanadium surface finish: phosphated to standard DIN 12476 applications: In industry for working on machines, engines and other equipment. larger dimensions are useful in shipbuilding, the oil industry and other heavy industries where larger machines and equipment are used
this wrench is especially suitable for work that requires higher torque and more lever-age in difficult to reach areas
drop forged, entirely hardened and tempered made according to standard DIN 894
L B A
620466$ 24 170 56 15
620467$ 27 170 56 15
620468$ 30 200 70 18
620469$ 32 200 70 18
620470$ 36 200 70 18
620471$ 41 240 88 20
620472$ 46 240 88 20
620473$ 50 265 102 20
620474$ 55 305 112 24
620475$ 60 305 112 24
620476$ 65 335 123 27
620477$ 70 370 154 30
620478$ 75 370 154 30
620479$ 80 400 170 33
620480$ 85 400 170 33
620481$ 90 450 192 38
620482$ 95 450 192 38
620483$ 100 485 225 45
620484$ 105 485 225 45
620485$ 110 515 236 48
620486$ 115 515 236 52
620487$ 120 535 253 53
620488$ 125 535 253 53
620489$ 130 565 273 53
620490$ 135 565 273 53
620491$ 140 635 300 58
620492$ 145 635 300 58
620493$ 150 635 300 58
LA
B
118/7
Slogging open end wrench material: special tool steel surface finish: anticorrosive oiled drop forged, entirely hardened and tempered made according to standard DIN 133
28
EN
L B2 B1 A2 A1
600357 6 119 10.4 14.5 5 3.5
600358 7 129 11.5 16.5 5.8 3.9
600359 8 141 13.2 18.5 6.9 3.9
600360 9 152 14.3 21 7.3 4
600361 10 163 15.9 23 7.5 4.2
600362 11 176 17.8 24.5 8 4.5
600363 12 186 19.4 26.5 8.5 4.7
600364 13 199 20.4 29.5 8.5 5.2
600365 14 210 22 31.5 9 5.2
600366 15 222 23.2 33.5 9.5 5.7
600367 16 234 24.8 36 10.5 6.2
600368 17 245 26.1 38 10.5 6.7
600369 18 257 27.7 40 1 7.2
600370 19 268 29.3 42 12 7.2
600371 20 280 31 44 12.5 7.7
600372 21 291 32.6 45.5 13 8.2
600373 22 303 34.1 46.5 13 8.2
600374 23 314 35.7 50.5 13 8.2
600375 24 330 37.3 52.5 14 8.5
600376 25 337 39 54.5 14.5 8.5
600377 26 349 40.1 56 15 8.5
600378 27 360 41.6 57.5 15 9
600379 28 373 43.2 59.5 15.5 9
600380 29 383 44.9 61.5 16 9.5
600381 30 395 46.5 63.5 16 10
600382 32 416 49 68 16.5 10.5
607019 35 500 53.5 78.8 20 13.6
602601 36 500 53.5 78.8 20 13.6
605838 38 515 58 82.8 20.5 14.1
602602 41 540 62 86.8 21 14.6
618514 46 560 69 94 23 16
618517 50 580 75 103 24 17
618491 1/4 119 10.4 14.5 5 3.5
618492 5/16 142 13.2 18.5 6.9 3.9
618493 3/8 153 14.3 21 7.3 4
618494 7/16 176 17.8 24.5 8 4.5
618495 1/2 199 20.4 29.5 8.5 5.2
618496 9/16 211 22 31.5 9 5.2
618497 5/8 234 24.8 36 10.5 6.2
618498 11/16 245 26.1 38 10.5 6.7
618499 3/4 268 29.3 42 12 7.2
618500 13/16 291 32.6 45.5 13 8.2
618501 7/8 303 34.1 46.5 13 8.2
618502 15/16 330 37.3 52.5 14 8.5
618503 1 337 39 54.5 14.5 8.5
618504 1.1/16 360 41.6 57.5 15 9
618505 1.1/8 372 43.2 59.5 15.5 9
618506 1.1/4 417 49 68 16.5 10.5
618507 1.5/16 417 49 68 16.5 10.5
L
B1B2
A2A1
15
120/1
Combination wrench, long type material: chrome vanadium surface finish: chrome plated according to EN12540 polished head ring part with LIFE profile drop forged, entirely hardened and tempered made according to standard ISO 7738 (only metric dimension)
L B2 B1 A2 A1
618508 1.3/8 500 53.5 78.8 20 13.6
618509 1.7/16 500 53.5 78.8 20 13.6
618510 1.1/2 500 53.5 78.8 20 13.6
618511 1.5/8 540 62 86.8 21 14.6
618512 1.11/16 540 62 86.8 21 14.6
618513 1.3/4 560 69 94 23 16
618515 1.13/16 560 69 94 23 16
618516 1.7/8 560 69 94 23 16
618518 2 580 75 103 24 17
600383 120/1CB 6 - 22 / 17
120/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22)
600384 120/1CB 6 - 32 / 26
120/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32)
611019 120/1CB 8 - 22 / 10
120/1 (8, 10, 11, 12, 13, 14, 15, 17, 19, 22)
611020 120/1CB 10 - 30 / 12
120/1 (10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30)
619397 120/1CB 1/4 - 3/4 / 9
120/1 (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4)
619398 120/1CB 1/4 - 1.1/4 / 16
120/1 (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.1/4)
120/1CB
Set of combination wrenches, long type in carton box
603709 120/1CS 8 - 19 / 8
120/1 (8, 9, 10, 12, 13, 14, 17, 19)
120/1CS
Set of combination wrenches, long type in carton box
29
615475 120/1CT 8 - 22 / 8
120/1 (8, 10, 11, 13, 15, 17, 19, 22), CT129
120/1CT
Set of combination wrenches, long type in bag
605537 120/1MS 6 - 22 / 17
120/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22), 977/2
120/1MS
Set of combination wrenches, long type on metal stand
610837 120/1PH 8 - 19 / 8
120/1 (8, 9, 10, 12, 13, 14, 17, 19)
610838 120/1PH 8 - 18 / 8
120/1 (8, 9, 10, 12, 13, 14, 16, 18)
120/1PH
Set of combination wrenches, long type on plastic hanger
L B2 B1 A2 A1
616745 3.2 105 8 14 4 3.2
616746 4 105 8 14 4 3.2
616747 4.5 105 8 14 4 3.2
616748 5 119 10.4 14.5 5 3.5
616749 5.5 119 10.4 14.5 5 3.5
600386 6 119 10.4 14.5 5 3.5
600387 7 129 11.5 16.5 5.8 3.9
600388 8 141 13.2 18.5 6.9 3.9
600389 9 152 14.3 21 7.3 4
600390 10 163 15.9 23 7.5 4.2
600391 11 176 17.8 24.5 8 4.5
600392 12 186 19.4 26.5 8.5 4.7
600393 13 199 20.4 29.5 8.5 5.2
600394 14 210 22 31.5 9 5.2
600395 15 222 23.2 33.5 9.5 5.7
600396 16 234 24.8 36 10.5 6.2
600397 17 245 26.1 38 10.5 6.7
600398 18 257 27.7 40 1 7.2
600399 19 268 29.3 42 12 7.2
600400 20 280 31 44 12.5 7.7
600401 21 291 32.6 45.5 13 8.2
600402 22 303 34.1 46.5 13 8.2
600403 23 314 35.7 50.5 13 8.2
600404 24 330 37.3 52.5 14 8.5
600405 25 337 39 54.5 14.5 8.5
600406 26 349 40.1 56 15 8.5
600407 27 360 41.6 57.5 15 9
600408 28 373 43.2 59.5 15.5 9
600409 29 383 44.9 61.5 16 9.5
600410 30 395 46.5 63.5 16 10
600411 32 416 49 68 16.5 10.5
607020 35 500 53.5 78.8 20 13.6
602689 36 500 53.5 78.8 20 13.6
605839 38 515 58 82.8 20.5 14.1
602690 41 540 62 86.8 21 14.6
616750 46 560 69 94 23 16
616751 50 580 75 103 24 17
616752 55 600 83 112 26 18
616753 60 620 91 120 28 20
616754 65 640 100 130 30 21
616755 70 660 108 140 32 23
616756 75 680 116 150 34 24
616757 80 700 124 160 36 26
618519 1/4 119 10.4 14.5 5 3.5
618520 5/16 142 13.2 18.5 6.9 3.9
618521 3/8 153 14.3 21 7.3 4
618522 7/16 176 17.8 24.5 8 4.5
L
B1B2
A2A1
15
120/2
Combination wrench, long type material: chrome vanadium surface finish: chrome plated according to EN12540 ring part with LIFE profile drop forged, entirely hardened and tempered made according to standard ISO 7738 (only metric dimension)
30
EN
L B2 B1 A2 A1
618523 1/2 199 20.4 29.5 8.5 5.2
618524 9/16 211 22 31.5 9 5.2
618525 5/8 234 24.8 36 10.5 6.2
618526 11/16 245 26.1 38 10.5 6.7
618527 3/4 268 29.3 42 12 7.2
618528 13/16 291 32.6 45.5 13 8.2
618529 7/8 303 34.1 46.5 13 8.2
618530 15/16 330 37.3 52.5 14 8.5
618531 1 337 39 54.5 14.5 8.5
618532 1.1/16 360 41.6 57.5 15 9
618533 1.1/8 372 43.2 59.5 15.5 9
618534 1.1/4 417 49 68 16.5 10.5
618535 1.5/16 417 49 68 16.5 10.5
618536 1.3/8 500 53.5 78.8 20 13.6
618537 1.7/16 500 53.5 78.8 20 13.6
618538 1.1/2 500 53.5 78.8 20 13.6
618539 1.5/8 540 62 86.8 21 14.6
618540 1.11/16 540 62 86.8 21 14.6
618541 1.3/4 560 69 94 23 16
618542 1.13/16 560 69 94 23 16
618543 1.7/8 560 69 94 23 16
618544 2 580 75 103 24 17
600412 120/2CB 6 - 22 / 17
120/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22)
600413 120/2CB 6 - 32 / 26
120/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32)
603670 120/2CB 8 - 22 / 10
120/2 (8, 10, 11, 12, 13, 14, 15, 17, 19, 22)
603671 120/2CB 10 - 30 / 12
120/2 (10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30)
619399 120/2CB 1/4 - 3/4 / 9
120/2 (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4)
619400 120/2CB 1/4 - 1.1/4 / 16
120/2 (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.1/4)
120/2CB
Set of combination wrenches, long type in carton box
603710 120/2CS 8 - 19 / 8
120/2 (8, 9, 10, 12, 13, 14, 17, 19)
120/2CS
Set of combination wrenches, long type in carton box
615476 120/2CT 8 - 22 / 8
120/2 (8, 10, 11, 13, 15, 17, 19, 22), CT129
120/2CT
Set of combination wrenches, long type in bag
605538 120/2MS 6 - 22 / 17
120/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22), 977/2
120/2MS
Set of combination wrenches, long type on metal stand
610839 120/2PH 8 - 19 / 8
120/2 (8, 9, 10, 12, 13, 14, 17, 19)
610840 120/2PH 8 - 18 / 8
120/2 (8, 9, 10, 12, 13, 14, 16, 18)
120/2PH
Set of combination wrenches, long type on plastic hanger
31
L B2 B1 A2 A1
600414 6 100 10.4 14.5 5 3.5
600415 7 109 11.5 16.5 5.8 3.9
600416 8 119 13.2 18.5 6.9 3.9
600417 9 123 14.3 21 7.3 4
600418 10 128 15.9 23 7.5 4.2
600419 11 135 17.8 24.5 8 4.5
600420 12 139 19.4 26.5 8.5 4.7
600421 13 150 20.4 29.5 8.5 5.2
600422 14 160 22 31.5 9 5.2
600423 15 170 23.2 33.5 9.5 5.7
600424 16 180 24.8 36 10.5 6.2
600425 17 190 26.1 38 10.5 6.7
600426 18 200 27.7 40 11 7.2
600427 19 210 29.3 42 12 7.2
600428 20 220 31 44 12.5 7.7
600429 21 230 32.6 45.5 13 8.2
600430 22 247 34.1 46.5 13 8.2
602089 23 250 35.7 50.5 13 8.2
602090 24 266 37.3 52.5 14 8.5
602091 25 270 39 54.5 14.5 8.5
602092 26 275 40.1 56 15 8.5
602093 27 292 41.6 57.5 15 9
602094 28 296 43.2 59.5 15.5 9
602095 29 300 44.9 61.5 16 9.5
602096 30 323 46.5 63.5 16 10
602097 32 343 49 68 16.5 10.5
618562 35 400 54 78.8 20 13.6
603332 36 400 54.5 79.5 20 13.5
618564 38 400 54 78.8 20 14.6
618566 41 420 62 86.8 21 14.6
618570 46 440 69 94 23 16
618573 50 480 75 103 24 17
605360 1/4 100 10.4 14.5 5 3.5
618655 9/32 109 16.5 11.5 3.9 5.8
605361 5/16 119 13.2 18.5 6.9 3.9
618654 11/32 123 21 14.3 4 7.3
605362 3/8 128 14.3 21 7.3 4
605363 7/16 135 17.8 24.5 8 4.5
605364 1/2 150 20.4 29.5 8.5 5.2
605365 9/16 160 22 31.5 9 5.2
605366 5/8 180 24.8 36 10.5 6.2
605367 11/16 190 26.1 38 10.5 6.7
605368 3/4 210 29.3 42 12 7.2
607857 13/16 230 32.6 45.5 13 8.2
605369 7/8 247 34.1 46.5 13 8.2
605370 15/16 266 37.3 52.5 14 8.5
605371 1 270 39 54.5 14.5 8.5
605372 1.1/16 292 41.6 57.5 15 9
L
B1B2
A2A1
15
125/1
Combination wrench, short type material: chrome vanadium surface finish: chrome plated according to EN12540 polished head ring part with LIFE profile drop forged, entirely hardened and tempered made according to standard ISO 7738 (only metric dimension)
L B2 B1 A2 A1
605373 1.1/8 296 43.2 59.5 15.5 9
605374 1.1/4 343 49 68 16.5 10.5
618560 1.5/16 343 49 68 16.5 10.5
618561 1.3/8 400 53.5 78.8 20 13.6
618563 1.7/16 400 53.5 78.8 20 13.6
618565 1.1/2 400 53.5 78.8 20 13.6
618567 1.5/8 420 62 86.8 21 14.6
618568 1.11/16 420 62 86.8 21 14.6
618569 1.3/4 440 69 94 23 16
618571 1.13/16 440 69 94 23 16
618572 1.7/8 440 69 94 23 16
618574 2 460 75 103 24 17
600431 125/1CB 6 - 22 / 17
125/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22)
602098 125/1CB 6 - 32 / 26
125/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32)
605541 125/1CB 3/8 - 1 / 8
125/1 (3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1)
605542 125/1CB 1/4 - 1.1/4 / 15
125/1 (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.1/4)
611021 125/1CB 8 - 22 / 10
125/1 (8, 10, 11, 12, 13, 14, 15, 17, 19, 22)
611022 125/1CB 10 - 30 / 12
125/1 (10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30)
125/1CB
Set of combination wrenches, short type in carton box
603711 125/1CS 8 - 19 / 8
125/1 (8, 9, 10, 12, 13, 14, 17, 19)
125/1CS
Set of combination wrenches, short type in carton box
32
EN
615478 125/1CT 8 - 22 / 8
125/1 (8, 10, 11, 13, 15, 17, 19, 22), CT110
619504 125/1CT 3/8 - 3/4 / 7
125/1 (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4)
619505 125/1CT 3/8 - 7/8 / 9
125/1 (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8)
619506 125/1CT 3/8 - 1 / 11
125/1 (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)
619507 125/1CT 3/8 - 1.1/4 / 14
125/1 (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.1/4)
125/1CT
Set of combination wrenches, short type in bag
605539 125/1MS 6 - 22 / 17
125/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22), 977/3
125/1MS
Set of combination wrenches, short type on metal stand
610841 125/1PH 8 - 19 / 8
125/1 (8, 9, 10, 12, 13, 14, 17, 19)
610842 125/1PH 8 - 18 / 8
125/1 (8, 9, 10, 12, 13, 14, 16, 18)
125/1PH
Set of combination wrenches, short type on plastic hanger
L B2 B1 A2 A1
618649 3.2 77 4.2 9.6 3 3
618650 4 77 4.2 9.6 3 3
618651 5 84 5.8 12 3 3
618652 5.5 84 5.8 12 3 3
602099 6 100 10.4 14.5 5 3.5
602100 7 109 11.5 16.5 5.8 3.9
602101 8 119 13.2 18.5 6.9 3.9
602102 9 123 14.3 21 7.3 4
602103 10 128 15.9 23 7.5 4.2
602104 11 135 17.8 24.5 8 4.5
602105 12 139 19.4 26.5 8.5 4.7
602106 13 150 20.4 29.5 8.5 5.2
602107 14 160 22 31.5 9 5.2
602108 15 170 23.2 33.5 9.5 5.7
602109 16 180 24.8 36 10.5 6.2
602110 17 190 26.1 38 10.5 6.7
602111 18 200 27.7 40 11 7.2
602112 19 210 29.3 42 12 7.2
602113 20 220 31 44 12.5 7.7
602114 21 230 32.6 45.5 13 8.2
602115 22 247 34.1 46.5 13 8.2
602116 23 250 35.7 50.5 13 8.2
602117 24 266 37.3 52.5 14 8.5
602118 25 270 39 54.5 14.5 8.5
602119 26 275 40.1 56 15 8.5
602120 27 292 41.6 57.5 15 9
602121 28 296 43.2 59.5 15.5 9
602122 29 300 44.9 61.5 16 9.5
602123 30 323 46.5 63.5 16 10
602124 32 343 49 68 16.5 10.5
603333 36 400 54.5 79.5 20 13.5
618653 7/32 84 5.8 12 3 3
605470 1/4 100 10.4 14.5 5 3.5
605471 5/16 119 13.2 18.5 6.9 3.9
605472 3/8 128 14.3 21 7.3 4
605473 7/16 135 17.8 24.5 8 4.5
605474 1/2 150 20.4 29.5 8.5 5.2
605475 9/16 160 22 31.5 9 5.2
605476 5/8 180 24.8 36 10.5 6.2
605477 11/16 190 26.1 38 10.5 6.7
605478 3/4 210 29.3 42 12 7.2
607858 13/16 230 32.6 45.5 13 8.2
605479 7/8 247 34.1 46.5 13 8.2
605480 15/16 266 37.3 52.5 14 8.5
605481 1 270 39 54.5 14.5 8.5
605482 1.1/16 292 41.6 57.5 15 9
605483 1.1/8 296 43.2 59.5 15.5 9
605484 1.1/4 343 49 68 16.5 10.5
L
B1B2
A2A1
15
125/2
Combination wrench, short type material: chrome vanadium surface finish: chrome plated according to EN12540 ring part with LIFE profile drop forged, entirely hardened and tempered made according to standard ISO 7738 (only metric dimension)
33
602125 125/2CB 6 - 22 / 17
125/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22)
602126 125/2CB 6 - 32 / 26
125/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32)
605543 125/2CB 3/8 - 1 / 8
125/2 (3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1)
605544 125/2CB 1/4 - 1.1/4 / 15
125/2 (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.1/4)
603347 125/2CB 8 - 22 / 10
125/2 (8, 10, 11, 12, 13, 14, 15, 17, 19, 22)
603348 125/2CB 10 - 30 / 12
125/2 (10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27, 30)
125/2CB
Set of combination wrenches, short type in carton box
603712 125/2CS 8 - 19 / 8
125/2 (8, 9, 10, 12, 13, 14, 17, 19)
125/2CS
Set of combination wrenches, short type in carton box
615479 125/2CT 8 - 22 / 8
125/2 (8, 10, 11, 13, 15, 17, 19, 22), CT110
125/2CT
Set of combination wrenches, short type in bag
605540 125/2MS 6 - 22 / 17
125/2 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22), 977/3
125/2MS
Set of combination wrenches, short type on metal stand
610843 125/2PH 8 - 19 / 8
125/2 (8, 9, 10, 12, 13, 14, 17, 19)
610844 125/2PH 8 - 18 / 8
125/2 (8, 9, 10, 12, 13, 14, 16, 18)
125/2PH
Set of combination wrenches, short type on plastic hanger
L B2 B1 A2 A1
611762 8 140 13.2 18.5 6.9 3.9
611763 10 160 15.9 23 7.5 4.2
611764 11 174 17.8 24.5 8 4.5
611765 12 183 19.4 26.5 8.5 4.7
611766 13 196 20.4 29.5 8.5 5.2
611767 14 206 22 31.5 9 5.2
611768 15 217 23.2 33.5 9.5 5.7
611769 16 227 24.8 36 10.5 6.2
611770 17 238 26.1 38 10.5 6.7
611930 18 250 28 40 11 7.2
611771 19 261 29.3 42 12 7.2
611772 22 296 34.1 46.5 13 8.2
611773 24 321 37.3 52.5 14 8.5
LA1
B2B1
15
A2
129/1
Combination wrench IBEX material: chrome vanadium surface finish: chrome plated according to EN12540 polished head ring part with LIFE profile the strength is acting on the flank of nut to protect its angle
3 drive surface for greater power 100% positioning of the wrench rewind action without remowing the wrench
34
EN
611776 129/1CB 8 - 24 / 12
129/1 (8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 22, 24)
129/1CB
Set of combination wrenches IBEX in carton box
611775 129/1CS 8 - 19 / 8
129/1 (8, 10, 12, 13, 14, 15, 17, 19)
129/1CS
Set of combination wrenches IBEX in carton box
615474 129/1CT 8 - 22 / 8
129/1 (8, 10, 11, 13, 15, 17, 19, 22), CT129
129/1CT
Set of combination wrenches IBEX in bag
A B
615464 470 330
CT129
Empty bag Dimension 470 x 330, for article 129,120,130,180,202 velcro fastening is used for easy opening and closing the closing belt is not needed
611774 129/1PH 8 - 19 / 8
129/1 (8, 10, 12, 13, 14, 15, 17, 19)
611967 129/1PH 8 - 18 / 8
129/1 (8, 10, 12, 13, 14, 15, 16, 18)
129/1PH
Set of combination wrenches IBEX on plastic hanger
L B2 B1 A2 A1
610047 6 113 11 14.5 5 3.5
610048 7 126 12 16.5 5.8 3.8
610049 8 132 14 18.5 6.9 3.8
610050 9 145 15 21 7.3 4
610051 10 157 17 23 7.5 4
610052 11 170 18 24.5 8 4.5
610053 12 176 20 26 8.5 4.7
610054 13 189 20.5 29 8.5 5
610055 14 202 22 31 9 5
610056 15 209 23.5 33 9.5 5.5
610057 16 221 25 35.5 10.5 6
610058 17 228 26 37.5 10.5 6.5
610059 18 247 27.5 39.5 11 7
610060 19 259 29.5 41.5 12 7
610061 20 265 31 43.5 12.5 7.5
L
B1 B2
A1A2
15
130/1
Offset combination wrench material: chrome vanadium surface finish: chrome plated according to EN12540 polished head ring part with LIFE profile drop forged, entirely hardened and tempered made according to standard ISO 7738 (only metric dimension)
129/1 USE
The strength is acting on the flank of mut to protect its angle
3 drive surface for greater power
100% positioning of the wrench Rewind action without removing the tools
35
L B2 B1 A2 A1
610062 21 275 32.5 45 13 8
610063 22 286 34 46 13 8
610064 23 296 36 50 13.5 8
610065 24 311 37.5 52 14 8.5
610066 25 318 39 54 14.5 8.5
610067 26 329 40 55 15 8.5
610068 27 340 41.5 56.5 15 9
610069 28 351 43 58.5 15.5 9
612319 29 363 45 60 16 9.5
610070 30 373 46 62 16.5 10.5
610071 32 394 49 67 16.5 11
610204 130/1CB 6 - 22 / 13
130/1 (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22)
130/1CB
Set of offset combination wrenches in carton box
611016 130/1PH 8 - 19 / 8
130/1 (8, 9, 10, 12, 13, 14, 17, 19)
130/1PH
Set of offset combination wrenches on plastic hanger
L B1 B2 A
600262 27 187 52 22 4
LA
B1B2
135/2
Single open end wrench for gas surface finish: chrome plated according to EN12540 material: sheet metal
L B2 B1 A2 A1
611609 8 144 17.5 18 7.7 4.5
611610 9 150 21 20.1 8 4.7
611611 10 157 21 22.5 8 5.3
611612 11 165 22.5 24.8 9 5.7
611613 12 172 25 26.5 9 6
611614 13 182 25 27.5 9 6.7
611615 14 189 27.5 31 9 7.1
611616 15 202 27.5 32.5 9 7.5
611617 16 216 30.5 34 10.5 7.8
611618 17 226 30.5 37 10.5 8.1
611619 18 237 33.5 38.5 11.5 8.3
611620 19 248 33.5 41 11.5 8.5
617753 20 251 42 41.8 12.2 9.2
617754 21 259 42 43.9 12.2 9.2
617755 22 267 42 46 12.2 9.2
617756 24 315 47 50.1 14.2 10.2
L
B2
A2A1
B1
160
Forged combination ratchet wrench material: chrome vanadium drop forged, entirely hardened and tempered 72 - teeth, 5 working angle
611957 160CB 8 - 19 / 8
160 (8, 9, 10, 12, 13, 14, 17, 19)
160CB
Set of forged combination ratchet wrenches in carton box
615468 160CT 8 - 19 / 6
160 (8, 10, 12, 13, 17, 19), CT252
160CT
Set of forged combination ratchet wrenches in bag
36
EN
617541 160PH 8 - 19 / 8
160 (8, 9, 10, 12, 13, 14, 17, 19)
160PH
Set of forged combination ratchet wrenches on plastic hanger
L B2 B1 A2 A1
611621 8 143 17.5 18 9 4.5
611623 10 158 21 22.5 10 5.3
611624 11 164 22.5 24.8 10 5.7
611625 12 171 25 26.5 10 6
611626 13 177 25 27.5 10 6.7
611627 14 187 27.5 31 10 7.1
611628 15 195 27.5 32.5 10 7.5
611629 16 211 30.5 34 13 7.8
611630 17 220 30.5 37 13 8
611631 18 235 33.5 38.5 13 8.3
611632 19 244 33.5 41 13 8.5
617757 20 251 42 41.8 12.2 9.2
617758 21 259 42 43.9 12.2 9.2
617759 22 267 42 46 12.2 9.2
617760 24 285 47 50.1 14.2 10.2
L
B1B2
A1 A2
161
Flexible forged combination ratchet wrench material: chrome vanadium drop forged, entirely hardened and tempered 72 - teeth, 5 working angle
611958 161CB 8 - 19 / 7
161 (8, 10, 12, 13, 14, 17, 19)
161CB
Set of flexible forged combination ratchet wrenches in carton box
615469 161CT 8 - 19 / 7
161 (8, 10, 12, 13, 14, 17, 19), CT252
161CT
Set of flexible forged combination ratchet wrenches in bag
L B1 B2 A1 A2
611633 6 x 7 116.2 20.1 20.1 11.2 11.2
611634 7 x 8 136.3 20.8 23.3 11 11
611635 8 x 9 136.3 20.8 23.3 11 11
611636 8 x 10 136.3 20.8 23.3 11 11
611637 10 x 11 143.8 23.5 26.5 11.1 11.1
611638 12 x 13 175 30.1 32.1 13 13.4
611639 12 x 14 175 30.1 32.1 13 13.4
618769 1/4 x 5/16 116 20.1 20.1 11.2 11.2
618770 3/8 x 7/16 144 23.5 26.5 11.4 11.1
618771 1/2 x 9/16 175 30.1 32.1 12.8 12.9
L
B1
A1
B2
A2
165
Ratchet ring wrench material: ratchet: chrome vanadium body: sheet metal, finish: chrome plated the casing on the wrenches is made from plastic entirely hardened and tempered minimum turn of angle for 20
37
L B1 B2 A1 A2
611640 6 x 7 111 20 20 11.2 11
611641 7 x 8 130 20.6 23 11 11.2
611642 8 x 9 130 20.6 23 11 11.2
611643 8 x 10 130 20.6 23 11 11.2
611644 10 x 11 136 23.4 26.4 11 11
611645 12 x 13 167 30.1 32 13 13.1
611646 12 x 14 167 30.1 32 13 13.1
L
B1
A1
B2
A2
166
Offset ratchet ring wrench material: ratchet: chrome vanadium body: sheet metal, finish: chrome plated the casing on the wrenches is made from plastic entirely hardened and tempered- minimum turn of angle for 20
L B2 B1 A2 A1
611647 8 x 9 133 21 17.5 8 7.7
611648 8 x 10 133 21 17.5 8 7.7
611649 10 x 11 152 22.5 21 8 8
611650 10 x 12 162 25 21 9 8
611651 10 x 13 162 25 21 9 8
611653 12 x 13 182 25 25 9 9
611654 12 x 14 192 27.5 25 9 9
611655 14 x 15 202 27.5 27.5 9 9
611656 14 x 17 212 30.5 27.5 10.5 9
611658 16 x 18 232 33.5 30.5 11.5 10.5
611659 17 x 19 232 33.5 30.5 11.5 10.5
617761 20 x 22 250 42 42 12.2 12.2
617762 21 x 23 260 47 42 14.2 12.2
617763 22 x 24 260 47 42 14.2 12.2
618765 1/4 x 5/16 133 21 17.5 8 7.7
618766 3/8 x 7/16 152 22.5 21.0 8.0 8.0
618767 1/2 x 9/16 192 27.5 25 9 9
618768 7/8 x 15/16 260 47 42 12.2 12.2
L
B1
A1
B2
A2
170
Forged ratchet ring wrench material: chrome vanadium drop forged, entirely hardened and tempered 72 - teeth, 5 working angle
611959 170CB 8 - 19 / 6
170 (8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18, 17 x 19)
170CB
Set of forged ratchet ring wrenches in carton box
615470 170CT 8 - 19 / 6
170 (8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18, 17 x 19), CT252
170CT
Set of forged ratchet ring wrenches in bag
L1 L2 D
605112 8 x 10 203 169 10
L2
L1
D
175/2
Wrench for oil drain plugs material: chrome vanadium surface finish: chrome plated according to EN12540 entirely hardened and tempered
38
EN
L1 L2 C D1 T L3 D2
609102 6 100 22 21 10 7 27 6
609103 7 100 22 21 11 8 27 6
609104 8 120 25 24 12 9 30 7
609105 9 120 25 25 13 9 30 7
609106 10 127 30 30 15 12 36 8
609107 11 127 30 30 16 13 36 8
609108 12 143 34 34 17 13 43.5 8
609109 13 150 34 34 20 13 43.5 12
609110 14 170 40 40 21 14 48 12
609111 15 171 40 40 22 15 48 14
609112 16 197 45 46 24 17 57 15
609113 17 197 45 46 25.3 18 57 15
609114 18 209 52 49 28.5 18 61 15
609115 19 209 52 49 28.5 19 61 15
609116 20 220 54 55 29.5 21 63.5 15
609117 21 220 54 55 30 22 63.5 15
609118 22 241 60 61 32 22 68 16
609119 23 241 60 61 33 24 74 20
609120 24 242 63 65 34.5 25 77.5 20
609121 25 242 63 65 35 26 77.5 20
609122 26 278 67 70 36 27 81 22
609123 27 278 67 70 36.5 28 81 22
609124 28 294 71 70 38.5 29 84 23
609125 29 300 73 85 40 30 90 24
609126 30 316 75 85 42 31 96.5 25
609127 32 305 79 85 44 32 97.5 25
609128 35 385 93 88 48.5 35 100 27
609129 36 395 94 88 49.5 36 101 27
L2
L1
T
D2
C
D1
95O
L3
176
Double ended offset socket wrench material: chrome vanadium surface finish: chrome plated according to EN12540 drop forged, entirely hardened and tempered
609130 176CB 8 - 24 / 16
176 (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24)
609131 176CB 8 - 32 / 22
176 (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 28, 29, 30, 32)
176CB
Set of double ended offset socket wrenches in carton box
620581$ 176CS6 8 - 19 / 6
176 (8, 10, 11, 13, 17, 19)
176CS6
Set of double ended offset socket wrenches in carton box
620582$ 176CS11 8 - 24 / 11
176 (8, 10, 11, 12, 13, 16, 17, 18, 19, 22, 24)
176CS11
Set of double ended offset socket wrenches in carton box
L1 L2 C D1 T L3 D2
609083 8 120 25 24 12 9 30 7
609084 9 120 25 25 13 9 30 7
609085 10 127 30 30 15 12 36 8
609086 11 127 30 30 16 13 36 8
609087 12 143 34 34 17 13 43.5 8
609088 13 150 34 34 20 13 43.5 12
609089 14 170 40 40 21 14 48 12
609090 15 171 40 40 22 15 48 14
609091 16 197 45 46 24 17 57 15
609092 17 197 45 46 25.3 18 57 15
609093 18 209 52 49 28.5 18 61 15
609094 19 209 52 49 28.5 19 61 15
609095 20 220 54 55 29.5 21 63.5 15
609096 21 220 54 55 30 22 63.5 15
609097 22 241 60 61 32 22 68 16
609098 23 241 60 61 33 24 74 20
609099 24 242 63 65 34.5 25 77.5 20
L2
L1
T
D2
C
D1
95O
L3
177
Double ended offset socket wrench material: chrome vanadium surface finish: chrome plated according to EN12540 drop forged, entirely hardened and tempered
39
609100 177CB 8 - 24 / 16
177 (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24)
177CB
Set of double ended offset socket wrenches in carton box
620583$ 177CS6 8 - 19 / 6
177 (8, 10, 11, 13, 17, 19)
177CS6
Set of double ended offset socket wrenches in carton box
620584$ 177CS11 8 - 24 / 11
177 (8, 10, 11, 12, 13, 16, 17, 18, 19, 22, 24)
177CS11
Set of double ended offset socket wrenches in carton box
A B d H L
620821$ 24 17 42 18.5 30 180
620822$ 27 17 42 18.5 30 180
620823$ 30 17 42 18.5 30 180
620824$ 32 18 50 20.5 35 235
620825$ 36 18 50 20.5 35 235
620826$ 41 18 55 20.5 35 235
620827$ 46 22 70 23.5 40 265
620828$ 50 22 70 23.5 40 265
620829$ 55 22 75 23.5 40 265
620830$ 60 30 94 29.5 50 345
620831$ 65 30 94 29.5 50 345
620832$ 70 35 107 29.5 55 365
620833$ 75 35 107 29.5 55 365
620834$ 80 40 125 29.5 59 385
620835$ 85 40 125 29.5 59 385
620836$ 90 45 140 29.5 63 410
620837$ 95 45 140 29.5 63 410
L
B
H
d
A
178/2
Single offset ring wrench material: chrome vanadium surface finish: chrome plated according to EN12540 drop forged, entirely hardened and tempered
D d L
620840$ 24 - 30 25 19 460
620841$ 32 - 41 27 21 610
620842$ 46 - 55 30 24 760
620843$ 60 - 95 37 30 860
L
D d
178.1/2
Rod for 178/2 material: chrome molybdenum surface finish: chrome plated according to EN12540
178/2 USE
40
EN
L B1 B2 A1 A2
605042 21 x 22 316 34 35 17 17
L
B1
A1
B2
A2
179/2
Scaffolding wrench material: chrome vanadium surface finish: chrome plated according to EN12540 to assembly scaffolding
L B1 B2 A1 A2
600509 5 x 7 145 9.5 11.8 5.5 6
600510 5.5 x 7 145 9.5 11.8 5.5 6
600511 6 x 7 178 10.3 11.8 5.5 6.1
600512 8 x 9 190 13.3 14.8 6.7 7.3
600513 8 x 10 166 13.3 16 6 8
602663 9 x 11 182 14.1 16.7 7 9
600514 10 x 11 205 16.3 17.8 7.9 8.4
602997 10 x 12 210 16.3 19.3 7.9 9
600515 11 x 12 205 16.7 17.7 9 9
600516 12 x 13 220 19.3 20.9 9 9.5
600517 12 x 14 205 17.7 20.3 9 10
600518 13 x 15 235 20.8 23.3 9.5 10.5
600519 13 x 17 258 20.8 26.3 9.5 11.5
600520 14 x 15 235 22.3 23.3 10 10.5
600521 14 x 17 257 20.5 24.3 10 12
600522 16 x 17 258 25.3 26.3 11 11.5
603123 16 x 18 259 23.6 26.5 11 12
600523 17 x 19 270 26.3 29.2 11.4 12.4
600524 18 x 19 270 28.2 29.2 11.9 12.4
600525 19 x 22 293 29.2 34.2 12.4 13.7
600526 20 x 22 295 31.2 34.2 12.8 13.7
600527 21 x 23 305 32.2 36.2 13.3 13.3
600528 22 x 24 315 34.2 37.2 13.7 13.7
600529 24 x 26 325 37.2 40.2 14.6 14.6
600530 24 x 27 325 37.2 41.2 14.6 14.6
600531 25 x 28 335 39.2 43.2 15 15
600532 27 x 29 335 41.2 44.2 15.8 15.8
600533 27 x 30 360 39.2 43.4 15 15
600534 27 x 32 360 41.2 48.2 15.8 15.8
600535 30 x 32 370 45.2 48.2 17 17
603845 30 x 34 366 43.5 48 15 15
L
B1
A1
B2
A2
180/1
Offset ring wrench material: chrome vanadium surface finish: chrome plated according to EN12540 polished head ring part with LIFE profile made according to standard ISO 10104 (only metric dimension) drop forged, entirely hardened and tempered
L B1 B2 A1 A2
603124 30 x 36 395 43.5 48.8 15 18
600536 32 x 36 410 48.2 54.2 17.8 19.4
600537 36 x 41 450 49 57 19 21
602664 41 x 46 472 57 62 21 23
618659 7/32 x 15/64 145 9.5 11.8 5.5 6.0
605375 1/4 x 5/16 178 10.3 11.8 5.5 6.1
605376 5/16 x 3/8 190 13.3 14.8 6.7 7.3
618660 11/32 x 13/32 182 14.1 16.7 7.9 8.4
605377 3/8 x 7/16 205 16.3 17.8 7.9 8.4
605378 7/16 x 1/2 205 16.7 17.7 9 9
605379 1/2 x 9/16 205 17.7 20.3 9 10
605380 9/16 x 5/8 235 22.3 23.3 10 10.5
605381 5/8 x 11/16 258 25.3 26.3 11 11.5
605382 11/16 x 3/4 270 26.3 29.3 11.4 12.4
605383 13/16 x 7/8 295 31.2 34.2 12.8 13.7
605384 15/16 x 1 325 37.2 40.2 14.6 15.4
605385 1 x 1.1/8 335 39.2 43.2 15 16.2
605386 1.1/16 x 1.1/4 360 41.2 48.2 15.8 17.8
600541 180/1CB 6 - 22 / 8
180/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22)
603674 180/1CB 6 - 27 / 10
180/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27)
600542 180/1CB 6 - 32 / 12
180/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32)
600543 180/1CB 6 - 41 / 13
180/1 (6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 32, 36 x 41)
605546 180/1CB 1/4 - 3/4 / 8
180/1 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4)
605547 180/1CB 1/4 - 1.1/4 / 12
180/1 (1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 13/16 x 7/8, 15/16 x 1, 1 x 1.1/8,