UniGas 4000+ Portable, Flue Gas Analysis Advanced Combustion … · 2018-01-05 · Draft & Differential Pressure Meter 2 Channel Differential Thermometer Ambient CO Monitor (Room

>10h Operation with Li-Ion Battery Pack

Smart Autozero without Removal the Probe

CO Dilution up to 10%

Stores up to 250 Complete Analysis with Customer Name and Address

Graphic Display with Menu and Zoom Feature

USB & RS232 interface with Window Software

Made in Italy

The most powerful and advanced palmtop analyser: up to 6 sensors!

10 INSTRUMENTS IN 1:

Combustion Flue Gas Analyser

NO/NOx Emissions

SO2 Emissions

Draft & Differential Pressure Meter

2 Channel Differential Thermometer

Ambient CO Monitor (Room Test)

Gas Network Leak Tightness Tester

Gas Leak Detector

Ionization Flame Tester

Temperature & Humidity Meter

Built-in Impact Printer (Not Thermal!)

Advanced Combustion Flue Gas Analyser

세일국제무역 • Tel. 02-837-6974 • Fax. 02-859-2059 • www.eurotron.co.kr

UniGas 4000+ Portable, Flue Gas Analysis

Advanced Combustion • Flue Gas Analyser"Excellence in measurements"

O2 CO CO% CO2 NO NO2 NOx SO2 H2T-Air(℃)

T-Gas(℃)

Combustion Efficiency(ETA)

Excess air(Lambda)

Pressure(Pa)

CO/CO2ratio

Gas LeakDetector

T+RH%Probe

Water Trip Kit

Gas Sampling Hose

Heated Probe

CxHy

UNIGAS 4000 PLUS 1 / 6

UniGas 4000+ FLUE GASANALYSERS

Instrument design


"Excellence in measurements"

Magnet case

ConnectionUSB Cable Connection

T+RH(%) ProbeGas Leck /

Natural Gas ProbeConnectionAC Power /

Charging Adapter

Print

LCD Display

Pressure / flowmeasurement

Cursor keys(Up/Down/Right/

Left/Scroll)

Water Trap Kit

Gas Sampling Hose

Line Filter


The UniGas 4000+ provides the latest tecnology in flue gas analysis. One instrument with many features:

P up to 6 gas sensors; P draft, gauge and differential pressure measurements;

P autozero valve for quick start-up P searching for presence and location of gas leaks;

P CO sensor with automatic protection; P operator safety with ambient CO continuous monitoring;

P built-in impact printer; P ambient temperature and relative humidity measurements.

P water, air and surface temperature measurements; P IRDA output for Pocket PC data transfer.

Easy replaceable gas sensors CO sensor dilution

UniGas 4000+ uses extended life, low maintenance sensors An automatic device protect the CO sensor in presence of high

replaceable by the user. CO level. The measuring range will increase up to 10% CO.

Advanced Diagnostic Autozero valve for quick start-up

Built-in flow meter with internal leak test. Diagnostic errors on You can install the probe in the stack immediately during the

sensor with current indication. autozero. The instrument will be ready in less then 60 seconds.

Standard Report of Calibration Li-Ion Rechargeable battery

Each instrument is factory calibrated and certified against Lithium Ion rechargeable batteries provide longer field use free

Eurotron Standard to ensure traceability, and shipped with a from memory effect and total discharge. Flue gas analyser and

Report of Calibration. internal printer is powered by a unique battery pack.

Charger is supplied as standard.

Keyboard & Display

Text, menu, and keyboard available in most common languages Multi Fuel selection

(not icons) for simple and intuitive operations. UniGas 4000+ provides up to 10 fuels for calculating combustion

Engineering units are selectable by keyboard. The large backlight values.

graphic LCD can display 3, 6 or 12 values per page (ZOOM function) Most used fuels for your country are preloaded from factory.

or with bargraph format. Others fuels can be added using GasConfig PC software.

Built-in impact printer Pressure/Draft input

The instrument has an optional internal and rugged printer. It uses a Differential pressure input to verify: low pressure, draft, gas pipework

low cost common roll of paper. Certainly more readable, long time leak with pressure decay programme, pressure in gas pipework,

and heat resistant than the thermal printout on chemical paper. pressure in combustion chamber, DP on filters and fan, pressure

switches calibration.

Smoke index

Smoke index measurement is performed by using the optional Gas sampling probe

external hand pump. The results can be stored in the internal Flue gas sampling probes, with different lengths and shapes, are

memory and printed on the report. available to match each specific requirement. The sampling probe is

connected to the instrument with a single or dual hose through a

Ambient CO safety monitoring Room Test (BS7967) water trap and a suspended particle filter.

A procedure can be selected to monitor the CO in ambient air using

the internal sensors. An internal program allows the CO max Combustion air temperature probe

measurement in atmospheric boiler room test with 15 values logging. A remote Pt100 probe is available for remote combustion air

An external optional probe is also available for continuous temperature measurement. This probe is strongly recommended

surveillance of the ambient and operator safety. Both acoustic and mainly in forced air boiler to obtain an accurate efficiency

visual alarm are available. measurement.



One Instrument with Many Functions



Gas pipework leak test Ionization flame tester

To check gas pipework for the presence of leaks using a pressure Checks the ionization current in boiler flame control sensor.

decay program and the internal pressure sensor. The tightness

test procedure includes dual report (let by). Gas leak sniffer

IGE / UP / 1B compliant. The instrument can operate in two ways:

• An external probe is available to locate the position of a gas leak.

Flash memory This probe has a flexible stainless steel shaft to reach difficult

The flash memory allows the instrument to be configured by locations.

updating the UniGas firmware for any future legislation requirement • An internal optional sensor can be installed inside the analyser

or product performance upgrading to locate the position of a gas leak into the domestic pipe

network. The internal pump draws the air from ambient and

Proprietary designed trap makes the instrument more sensitive for micro-leaks.

Built-in protection for water suction.

External, to prevent risk of sensors damage.

Big water tank capacity for high condensing boiler. Small rubber

cup for easy water empty. Long life paper filter.

Type: palm-top combustion gas analyser. Print autonomy: up to 40 reports with full battery (typical).

Calibration: automatic calibration procedure at instrument Printed report header: 4 user programmable lines

switch-On.

Display: graphic black LCD with white lamp.

Self-diagnosis: Sensors efficiency test with display diagnostic

messages. Flue gas probes: stainless steel shaft with incorporated temperature

sensor.

Fuel types: Up to 10 selectable from keyboard (most common

preprogrammed). Memory: up to 250 full analysis data structured by boilers (Tags).

Power supply: High capacity Ni-MH rechargeable battery pack / Serial communication: standard USB serial interface.

external battery charger.

Operating temperature: from -40°C to +70°C

Charging time: 3h at 90% with instrument Off.

Storage temperature: from -40 to +80°C (3 months maximum at

Battery life: 10 hours (typical) continuous use (without printing & temperatures exceeding the operational limits).

backlit).

Dimensions: 115x90x330 mm

Printer: Internal impact type 24 columns with 58 mm paper roll.

Weight: 900 g nett. (including battery and printer).

Printer power supply: from the analyser battery pack.


One Instrument with Many Functions

Technical Specifications



Gas sniffer probe


UniGas 4000+ can store 250 readings structured by boilers and customers.

Using the optional DBGas 2004 WindowsTM software package, you can organize

and manage your inspection and maintenance activity.

DBGas 2004 software package includes TM GasConfig WindowsTM software.

Using the software you can modify the configuration of the instrument.

Pa Probe Water Trap

External 200Pa probe for natural

boiler draft measurements,

UNI 10845 compliant

Resolution: 0.1 Pa

Precision:

±0.5 Pa (from -10 to +10 Pa);

± 3 Pa otherwise.

Supplied with certificate of calibration.

ABS rigid carrying case Compact rigid carrying case

(TGD - Temperature, Gas, Draft) Differential pressure probe and

sampling probe burner hose kit

180mm, 300mm, 750mm,

1000mm, 1500mm

Manual pump for smoke index Pt100

measurements remote air sensor with cone

Ambient T+RH% probe Standard Gas Sampling Hose

Ambient CO probe Wanted length various

Gas sniffer probe

Heated Gas Sampling Probe Standard Gas Sampling Extension Hose

Length 300mm, 750mm, (max. 100m)

1000mm, 1500 mm

DBGas 2004 - Boiler Test & Customer Database Manager


Accessories for UniGas 4000+


USB standard interface

Patent pending

Rubber Cup to Empty

Line Filter



Parameter Range Unit Accuracy Res. Principle

O2 0…25 % ±0.1% vol. 0.1 % Electrochemical

CO 0...20,000 ppm ±1 ppm < 400 ppm 1 ppm Electrochemical

±0.2% rdg up to 4000 ppm

CO (H2 compensated) 0…10,000 ppm ±0.5% rdg elsewhere 1 ppm Electrochemical

CO % 0...10 % ±0.5% rdg up to FS 0.01 % Electrochemical

CO2 0...100 % 0.1 % Calculated

NO 0...4,000 ppm ±1 ppm <125 ppm 1 ppm Electrochemical

±0.2% rdg up to 4000 ppm

NO2 0...1,000 ppm <40 ppm = ±1 ppm 1 ppm Electrochemical

up to 500 ppm = ±0.5%

NOx 0…5,000 ppm Calculated

SO2 0…5,000 ppm ±0.2% rdg up to 5000 ppm 1 ppm Electrochemical

H2 0...2,000 ppm ±0 .2% rdg f.s 1 ppm Electrochemical

CxHy (CH4) 0...5.00% Vol. % ±0.5% rdg. 0.01% Pellistor

Tgas - 40...1200 ℃ ±(0.2% + 0.3℃) 0.1℃ TC K

Tflow - 40...100 ℃ ±(0.2% + 0.3℃) 0.1℃ TC K

Treturn - 40...100 ℃ ±(0.2% + 0.3℃) 0.1℃ TC K

Pressure -200...200 mbar ±0.2 mbar <50 mbar 0.1 mbar Piezo

±0.1% rdg. >50 mbar

Draft ±40.00 hPa ±0.01 hPa < 300 Pa 0.01 hPa Piezo

±0.1% rdg. > 300 Pa

Excess air 1.00...infinity or 0 - 250% 0.01 Calculated

Efficiency 1...120 % (also for condensing boilers 0.1 % Calculated

with automatic detection)

All emission measurements can be displayed with reference to a programmable O2 value.

Accuracy limits are stated as % of reading. An additional ±1 digit error has to be considered.

The stated pressure relative accuracy is valid only after the zero procedure.

3 Measuring reading can be directly converted from °C to °F, ppm to mg/Nm and from hPa to mmH2O, mbar, inH2O.



Gas measured values



Documents

UniGas 4000+ Portable, Flue Gas Analysis Advanced Combustion … · 2018-01-05 · Draft & Differential Pressure Meter 2 Channel Differential Thermometer Ambient CO Monitor (Room