Seite 1 / 17

Uniclean ML Loading Cart – Interim solution

Technical Description CONTENTS: 11.. Loading cart Flex 1500 UML – Container with lid Page 2

22.. Loading cart Flex 950 UML - Container with lid Page 3

33.. Basket for container filter – Loading cart Flex UML Page 4

44.. Loading cart Flex 1500 UML - OR-shoes Page 5 55.. Loading cart Flex 950 UML - OR-choes Page 6 66.. Barsket for insoles of OR-shoes – Loading cart Flex UML Page 7

77.. OR-shoe-modul - Loading cart Flex 1500 UML Page 8 88.. OR-shoe-modul - Loading cart Flex 950 UML Page 9

99.. Loading cart Flex 1500 UML – AT Container with lid Page 10

1100.. Loading cart Flex 950 UML – AT Container with lid Page 11

1111.. Loading cart Flex 1500 UML – Case with 2-piece hinged lid Page 12

1122.. Loading cart Flex 950 UML – Case with 2-piece hinged lid Page 13

1133.. Loading cart Flex 1500 UML – Plastic crates with lid Page 14

1144.. Loading cart Flex 1500 UML – mixed cart-plastic crades and OR shoes Page 15

1155.. Loading cart Flex 1500 UML – Inserts and plates Page 16 1166.. Layout loading variants ML Page 17

Seite 2 / 17

MMM-No.: 010126801 Loading cart Flex 1500 UML - Container with lid Description: Loading cart for sterile equipment containers made of metal to be processed with lid in

Uniclean ML type 3120 or 2220. Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart. Cart capacity: 12 Containers (1 STU) with lids

Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes wheel diameter 160 mm Outer dimensions: H = 1956 mm W = 755 mm L = 1480 mm

Seite 3 / 17

MMM-No.: 010127176

Loading cart Flex 950 UML - Container with lid Description: Loading cart for sterile equipment containers made of metal to be processed with lid in

Uniclean ML type 3120 or 2220. Uniclean ML 3120 holds 3 carts. Uniclean ML 2220 holds 2 carts. . Cart capacity: 6 Containers (1 STE) with lids

Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes wheel diameter 160 mm Outer dimensions: H = 1956 mm W = 755 mm L = 940 mm

Seite 4 / 17

MMM-No.: 010127237

Basket for container filters – Loading cart Flex UML Description: Basket for holding the container filters. The basket is hooked onto the cart and is

suitable for cart 010126801 and 010127176. The basket reduces the cart capacity by one container with lid (1 STE).

Filter capacity: max. 24 pieces

Material: wire mesh, stainless steel 1.4301 Surface finish: glass bead blasted Dimensions: 300 x 300 x 600 (H x W x L in mm)

Pagina 5 / 17

MMM-No.: 010127238

Loading cart Flex 1500 UML - OR shoes Description: Loading cart for OR-shoes to be processed in Uniclean ML type 3120 or 2220. Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart. Cart capacity: 30 pairs of shoes

Comment regarding Capacity: Due to the ergonomic loading height, the capacity is

limited to 30 pairs of shoes. On demand, the cart capacity can be extended by 10 pairs of shoes by use of the OR-shoe module (010127241). The loading height of the cart then is 1950 mm.

Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors,. 2 with brakes wheel diameter 160 mm Outer dimensions: H = 1900 mm x W = 755 mm x L = 1480 mm

Seite 6 / 17

MMM-No.: 010127239

Loading cart Flex 950 UML - OR shoes Description: Loading cart for OR-shoes to be processed in Uniclean ML type 3120 or 2220. Uniclean ML 3120 holds 3 carts. Uniclean ML 2220 holds 2 cart. Cart capacity: 18 pairs of surgical shoes

Comment regarding Capacity: Due to the ergonomic loading height, the capacity is

limited to 18 pairs of shoes. On demand, the cart capacity can be extended by 6 pairs of shoes by use of the OR-shoe module ((010127243). The loading height of the cart then is 1950 mm.

Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes wheel diameter 160 mm Outer dimensions: H = 1900 mm x W = 755 mm x L = 950 mm

Seite 7 / 17

MMM-No.: 010127240

Basket for insoles of OR-shoes – Loading cart Flex UML Description: Basket for holding the insoles of OR-shoes. The basket is hooked onto the cart and is

suitable for cart 010127238 and 01012723. The basket reduces the cart capacity by 5 OR-shoes. Alternatively, it can be placed onto a extra level on the cart.

Capacity: max. 24 pieces

Material: wire mesh, stainless steel 1.4301 Surface finish: glass bead blasted Dimensions: 300 x 300 x 600 (H x W x L in mm)

Seite 8 / 17

MMM-No.: 010127241

OR-shoe module - Loading cart Flex 1500 UML Description: Additional module for 10 pairs of OR-shoes to extend the capactiy of the loading cart

Flex 1500 UML - OR-shoes (010127238). The module consists of two pieces and can be added at any time. Capacity: 10 pairs of OR-shoes

Material: stainless steel 1.4301 Surface finish: glass bead blasted Outer dimensions: H = 400mm x W = 755 mm x L = 1480 mm

Seite 9 / 17

MMM-No.: 010127243

OR-shoe module - Loading cart Flex 950 UML Description: Additional modules for 6 pairs of surgical shoes to extend the capactiy of the loading

cart flex 950 UML - surgical shoes. The modules can be added at any time.

Additional module for 6 pairs of OR-shoes to extend the capactiy of the loading cart Flex 950 UML - OR-shoes (010127239).

The module consists of two pieces and can be added at any time. Capacity: 6 pairs of surgical shoes

Material: stainless steel 1.4301 Surface finish: glass bead blasted Outer dimensions: H = 400mm x W = 755 mm x L = 950 mm

Seite 10 / 17

MMM-Nr.: 010129263 Loading cart Flex 1500 UML – AT Container with lid Description: BW Flex 1500 UML-AT-Container with lid

Loading cart for sterile equipment containers made of metal and their lids made of metal or plastics (e.g. Aesculap, Martin, Wagner etc.) to be processed in Uniclean ML type 3120 or 2220.

Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart.

Customer-specific adaptation of the cart may be necessary on site. Cart capacity: 8 AT Containers with lid

Outer dimensions: L 1500 x W 755 x H 1950

Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 11 / 17

MMM-Nr.: 010129280 Loading cart Flex 950 UML – AT Container with lid Description: BW Flex 1500 UML-AT-Container with lid

Loading cart for sterile equipment containers made of metal and their lids made of metal or plastics (e.g. Aesculap, Martin, Wagner etc.) to be processed with lid in Uniclean ML type 3120 or 2220.

Uniclean ML 3120 holds 3 carts. Uniclean ML 2220 holds 2 cart.

Customer-specific adaptation of the cart may be necessary on site.

Cart capacity: 4 containers with lid Outer dimensions: L 950 x W 755 x H 1950 Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 12 / 17

MMM-Nr.: 010129284 Loading cart 1500 UML – Crates with 2-piece hinged lid Description: BW Flex 1500 UML- Plastics crates with two-piece hinged lid

Loading cart for plastcs crates made of plastics with integrated two-piece hinged lid to be processed in Uniclean ML type 3120 or 2220. The lid is not removable.

Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart.

Please mind: Due to the material and design, the plastics crates cannot be dried.

Customer-specific adaptation of the cart may be necessary on site. The following capacity information refers to a specific box size. Further sizes on demand.

Cart capacity: 6 boxes with integrated hinged lid

Box dimension: W410 x L610 x D320 Higher capacity in case of smaller boxes.

Outer dimensions: L 1500 x W 755 x H 1950 Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking

4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 13 / 17

MMM-Nr.: 010129285 Loading cart Flex 950 UML – Crate with 2-piece hinged lid Description: BW Flex 950 UML- Plastics crates with tow-piece hinged lid

Loading cart for sterile equipment containers made of plastics with integrated two-piece hinged lid to be processed in Uniclean ML type 3120 or 2220. The lid is not removable.

Uniclean ML 3120 holds 3 carts. Uniclean ML 2220 holds 2 cart.

Please mind: Due to the material and design, the plastics crates cannot be dried.

Customer-specific adaptation of the cart may be necessary on site.

Cart capacity: 3 boxes with integrated hinged lid Box dimensions: W410 x L610 x D320 Capacity of other box dimensions on demand.

Outer dimensions: L 950 x B 755 x H 1950 Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 14 / 17

MMM-Nr.: 010129288 Loading cart Flex 1500 UML – Plastic crates with lid Description: BW Flex 1500 UML Plastics crates with lid

Loading cart for plastics crates of various sizes including lid to be processed in Uniclean ML type 3120 or 2220.

Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart.

Please mind: Crates with a length exceeding 600 mm and smaller than 900 mm require a special lid basket which is available on demand.

Please mind: Due to the material and design, the drying ability of the plastics crates is limited.

Customer-specific adaptation of the cart may be necessary on site.

Cart capacity: Depends on box type and size

Outer dimensions: L 1500 x B 755 x H 1950 Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 15 / 17

MMM-Nr.: 010129290 Loading cart flex 1500 UML – Mixed cart – plastic crates and OR shoes Description: BW Flex 1500 UML-Mixed cart for plastic crates and OR shoes

Loading cart for plastics boxes with lid and OR-shoes to be processed in Uniclean ML type 3120 or 2220.

Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart.

Please mind: Boxes with a length exceeding 600 mm and smaller than 900 mm require a special lid basket which is available on demand.

Please mind: Due to the material and design, the drying ability of the plastics boxes is limited.

Customer-specific adaptation of the cart may be necessary on site.

Capacity boxes: Depends on box type and size

. Capacity OR shoes: 10 pairs, size 35 - 47

Outer dimensions: L 1500 x B 755 x H 1950

Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking

4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 16 / 17

MMM-Nr.: 010129292 BW Flex 1500 UML – Inserts and plates Description: BW Flex 1500 UML – Loading cart for inserts and plates

Loading cart for plastics drawers and dividers to be processed in Uniclean ML type 3120 or 2220.

Uniclean ML 3120 holds 2 carts. Uniclean ML 2220 holds 1 cart.

Please mind: Due to the material and design, the drying ability of the plastics drawers is limited.

Customer-specific adaptation of the cart may be necessary on site.

Capacity drawer: 8 pcs. with T=80 x L=607 x B=410.

Number depens on drawer design Capacity divider: appr. 32 pcs.. on one loading side Outer dimensions: L 1500 x B 755 x H 1950 Cart material: stainless steel 1.4301 Surface finish: glass bead blasted Castors: rubber, non-marking 4 guide castors, 2 with brakes Castor housing: stainless steel

Seite 17 / 17

Loading variants:

L 950 L 1500 L 1500 Type UML 2220 Type UML 3120 Useful length 2230 Useful length 3100 L 950 L 950 L 950 L 950 L 1500 L 1500 L 950