Upload
lehanh
View
278
Download
2
Embed Size (px)
Citation preview
Underground Residential Distribution (URD)
www.dulmison.com.au16-2
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
URD Turret - Series ElevenHigh density injection moulded polyethylene turrets and bases
Easily transported and installedStrong but light base and turret allow easy transport and installation. Turret is easily and simplysecured to base with D-head stainless steel or socket button-head screws.
Maintenance-free designThe all weather polyethylene construction requires no painting or maintenance, as protectionagainst corrosion/moisture is not an issue.
Turret DetailsMaterial:Colour:Venting:
Markings:IP Rating:
UT11GUT11GVUT11SG
UT11SGV
NYNY
550550335335
293293306306
225.5225.5238.5238.5
W DVent HCat No.
UEC11MGUEC11MGEUEC11MGS
350350350
550550550
510510510
NoneD-Head DHB10MW22Socket Screw UESM10
TopDepth
SuppliedHardwareL TopCat No.
High impact polyethylene.GreenFor vented turrets add suffix "V". For example, the catalogue number for 'tallvented' would be UT11GV.Danger Electricity.IP44
Turret
Base
These panels fit the tapered slots cast in the UEC Series Eleven bases. Order panels separately.Small panel UEP240 and UEP288 fit the small UT11SG turret. All other panels require the largerUT11G Series turrets.
Materials:Switch panel type X to AS1795 except panel UEP288 which is injected moulded plastic.
Underground Residential Distribution (URD)
URD Series Eleven Panels
www.dulmison.com.au 16-3
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
UEP11T2UEP11T2KUEP11T3A
UEP288UEP240UEP390
UEP480TUEP495UEP535
UEPW495
515510440205240390480495535495
205205200288205205205205205288
WedgeWedgeWedgeBlankBlankBlankBlankBlankBlankBlank
1 in 1 out3 in 3 out
2 dual in 2 dual outN/AN/AN/AN/AN/AN/AN/A
NoYesNoN/AN/AN/AN/AN/AN/AN/A
W Type Take Offs Neutral BarHCat No.
UEP11T2 UEP11T2K Type UEP
UEP11T3A UEP288 UEP480T
Panel
The interchangeable turrets, bases and panels provide a combination that can meet wide rangingconditions in the field and provide cost savings in purchasing and inventory.
Turret DetailsTurret:Venting:
Door:Hardware:IP Rating:
Base DetailsFunction:
Self extinguishing fibreglassTop vent holes on turret sides with a venting step at the base provides flowthrough air circulation and minimise condensation.Turrets containing RD in the part number have a removable and lockable doorUESM10 socket button screw or DHBM10W22 D-Head boltIP46D
UEC1 base tapered on all sidesUEC3 base tapered on three sides and flat at the back for mounting closeto structures
Underground Residential Distribution (URD)
URD Turret - EV SeriesSelf extinguishing reinforced fibreglass
www.dulmison.com.au16-4
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
UET1SEVUETEV
UETEVGN
F/GF/GF/G
BeigeGreenGreen
470620620
380375375
318318318
H W DMaterial ColourCat No.
UEC1UEC3
ConcreteConcrete
230235
654640
654640
W DMaterial HCat No.
UEPFL1UEPFL2BUEPFS1
610572425
343346343
-3-
H W Wedge LinksCat No.
UEPFL1 UEPFS1 UEPFL2B
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au 16-5
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
The paralleling pillar and base are designed to house a 3-phase switch disconnector (FSD) forlow voltage mains cable interconnecting. Alternatively they are suitable for servicingindustrial/commercial customers.URDIC pillars and bases are interchangeable with fibreglass EV Series cover and correspondingconcrete base.
Turret DetailsMaterial:Colour:Venting:Hardware:
High impact UV resistant polyethyleneGreen.Top and bottom vented4 x DHB10MW22 are provided standard with the base. There is also anOption 2 kit of 4 x UESM10 if requested.
URD Paralleling Pillar and BaseSeries URDIC65
URDIC65 Polyethylene 645 395 360
W DMaterial HCat No.
UEFLL Gal Steel 569 346
WMaterial HCat No.
URDIB65 Polyethylene 365 560 560
W DMaterial HCat No.
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au16-6
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
The Slimline is designed to house commercial or industrial distribution equipment adjacent to awall or shopfront.
Turret DetailsMaterial:Venting:Marking:Hardware:IP Rating:
Self Extinguishing FibreglassTop ventedDanger ElectricityDHB32 or UES11, order separatelyIP56
URD Pillars - the Slimline
UETSL1V Beige 768 572 279
W DColour HCat No.
UEPFSL1 738 396
H WCat No.
UECSL1 Concrete 400 635 311
W DMaterial HCat No.
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au 16-7
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Type UET8 has a designed capacity to accommodate fuses, circuit isolation and other distributionequipment for industrial and commercial systems. Panel material is high grade Switch panel TypeX to AS1795, Part 1 supplied either blank or drilled and fitted to customer requirements.
Turret DetailsMaterial:Colour:Venting:Marking:Hardware:IP Rating:
Self Extinguishing FibreglassGreenTop and bottom ventedDanger ElectricityDHB32 or UES11, order separatelyIP44
Industrial / Commercial PillarType UET8
UET8O FG 745 490 380
W DMaterial HCat No.
UEP26215UEPF8
FGFG
560620
425575
WMaterial HCat No.
UEC8 Concrete 295 740 568
W DMaterial HCat No.
UEPF8 UEP26215
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au16-8
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Supplied as complete pillar assembly. Comprising of turret, panel and base, or just turret andbase. Designed for commercial or industrial distribution where quick access is required through akey locked door.
DetailsMaterial:Colour:Venting:Marking:Hardware:IP Rating:
Self Extinguishing FibreglassGreen or Beige, please confirm at time of orderTop ventedDanger ElectricityNot applicableIP44
URD PillarsType UETSD1C
UETSD1CUETSD1AWC
224741K02UETSD1PG2C
11001100
740740
225225
W DPanel Configuration HCat No.
UETSD1PG2C22171K02
C/W active link and lexan coversBlank
Panel ConfigurationCat No.
UETSD1AWCUETSD1C
UETSD1PG2C
Complete Pillar
UETSD1NP 1100 740 225
W DHCat No.Turret and Base assembly
Panel, sold separately
Underground Residential Distribution (URD)
www.dulmison.com.au 16-9
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
This pillar design provides easy access to fuses etc. via a hinged lockable door. Standard lockingprovided is L & F ACR19 camlock. Available on request is Lockwood Type 201 series lock.
Turret DetailsMaterial:Venting:Marking:Hardware:IP Rating:
Self Extinguishing FibreglassBottom - by clearance with baseDanger ElectricityDHB32 or UES11, order separatelyIP44
Industrial/Commercial PillarType UET SD2
UETSD2UETSD2G
FGFG
BeigeGreen
900900
520520
400400
H W DMaterial ColourCat No.
UEPFSD2 768 474
H WCat No.
UECSD Concrete 280 534 280
W DMaterial HCat No.
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au16-10
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
This large pillar is designed for sitting close to building alignments, walls, etc. and meetsrequirements for housing industrial distribution busbar gear. It has a padlockable and removabledoor to facilitate access.
DetailsMaterial:Venting:Colour:Marking:Hardware:IP Rating:
Self Extinguishing FibreglassTop and bottom ventedGreenDanger ElectricityDHB32 or UES11, order separatelyIP56
Industrial/Commercial PillarType UETSD4
UETSD4 Green 1280 710 270
W DColour HCat No.
UEPSD4 F/G 820 675
WMaterial HCat No.
UECSD4 Concrete 390 780 330
W DMaterial HCat No.
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au 16-11
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
This pillar with lockable door, complies with AS3000 requirements of lock being at a minimumheight of 1.2m above ground. Door is removable for easy re-entry, inspection and maintenance.
Turret DetailsMaterial:Venting:Colour:Security:Marking:Hardware:IP Rating:
Self Extinguishing FibreglassTop and BottomBeige. For other colours refer DulmisonLockable doorDanger ElectricityDHB32 or UES11, order separatelyIP56
Industrial/Commercial PillarType UETSD5
UETSD5 FG 1310 450 320
W DMaterial HCat No.
UEPFSD5 1100 375
H WCat No.
UECSD5 Concrete 400 620 380
W DMaterial HCat No.
Turret
Panel
Base
Underground Residential Distribution (URD)
www.dulmison.com.au16-12
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Supplied as complete pillar assembly, comprising of turret, panel and base or just turret and base.This pillar is designed for front and rear access for simplified equipment installation and servicing.It has low maintenance design and materials. It is UV stabilised for a long service life and lightweight to be easily transported and site installed. The design accommodates panels or busbarsfor stripple fuses. The removable base front panel facilitates laying of larger cable sizes andprovides easy service access.
DetailsMaterial:Venting:
Panel Mounting:
Security:
Marking:Hardware:IP Rating:
Self Extinguishing FibreglassTop venting with interior baffles to protect wiring and equipment againstunauthorised intrusion of foreign objects.Two internal moulded fibreglass angles provide for simple attachment ofpanels or busbars for stripple fuses.3-point door locking and latching bars. Customers may install lock cylinders tomeet own master key systemDanger ElectricityDHB32 or UES11, order separatelyIP44
Commercial/Industrial Distribution PillarFront and Rear Access Type UETSD6
Turret and Base Assembly
UETSD6UETSD6GN
BeigeGreen
16301630
710710
412412
W DColour HCat No.
Panel, sold separately
UEPSD6 1100 680 10
W DCat No. H
Underground Residential Distribution (URD)
www.dulmison.com.au 16-13
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
URD Fast Find Table
Turret Panel Base Bolts Locking Tool
UT11GUT11GV
UT11SGUT11SGV
UET1SEV
UETEVUETEVGN
URDIC65
UETSL1V
UET8O
UETSD2UETSD2G
UETSD4
UETSD5
UETSD6UETSD6GN
UEP11T2UEP11T2KUEP11T3A
UEP390UEP480TUEP495UEP535
UEPW495
UEP288UEP240
UEPFS1
UEPFL1UEPFL2BUEPFL2P
UEFLLUEPFS1UEPFL1
UEPFL2BUEPFL2P
UEPFSL1
UEP26215UEPF8
UETSD1CUETSD1AWC
UEPFSD2
UEPSD4
UEPSD5
UEPSD6
UETSD6PUETSD6GP
UEC11MGUEC11MGEUEC11MGS
UEC1 UEC3
URDIB65
UECSL1
UEC8
UECSD
UECSD4
UECSD5
UETSD6UETSD6GN
DHB10MW22UESM10
DHB10MW22UESM10
DHB10MW22UESM10
DHB32UES11DHB32UES11
N/A
DHB32UES11DHB32UES11DHB32UES11
DHB32UES11
LD3M LP3
LD1 LP1
----
LD1 LP1
----
----
----
----
----
----
E18340E19882
E18340E19882
E18340E19882
E18340E19882
E18340
E18340E19882E18340E19882E18340E19882
E18340E19882
Underground Residential Distribution (URD)
www.dulmison.com.au16-14
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
D Head Bolts - Stainless steel
D Head Bolt SpannersTube Spanner - Short
Turret Security Equipment
Turret Hold Down BoltsSocket Button Head Screws - Stainless steel.
UESM10UES11
M10 x 32mm11/4" x 3/8" W
SizeCat No.
DHB32DHB38
DHB10MW22
11/4" x 3/8" W11/2" x 3/8" WM10 x 30mm
SizeCat No.
E19882 780mm long tool for all DHB D head bolts
DescriptionCat No.
S-Bar Spanner - Long
E18340 126mm long tool for UET80 turret where design prevents useof T-bar types. Can be used on all DHB bolts on all turrets
DescriptionCat No.
Underground Residential Distribution (URD)
www.dulmison.com.au 16-15
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)Cat Nos. LD1 and LP1For turrets types UET EV, UET1 SEV and UET SL1V.Padlocks not included.
Cat Nos. LD3M and LP3For turrets types UET Series Eleven. Padlocks not included.
Locking devices LD1/LP1 and LD3M/LP3 have similar, but not interchangeable, components.Each have stainless steel bolts with flat extension drilled to accept padlocks and have stainlesssteel locking plates. These locking devices, in conjunction with their appropriate turret hold downbolts, provide turrets with a high degree of security against unauthorised entry.
Turret Security EquipmentLocking Devices
Cat. LD3M & LP3
Cat. LP1 & LD1-2 Cat. LP3
Cat. LD3M
Cat. LP1 & LD1-3
Underground Residential Distribution (URD)
www.dulmison.com.au16-16
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Designed for use where two or more lugs are to bebolted together with provision for copper cable tee-offsockets. Made of high conductivity aluminium alloy andfitted with cadmium plated grub screws in tee-offsockets. Tee-off holes are pre-packed with Alminox.
The standard grub screws have a screw driver slot butcan be supplied with an Allen Key screw on request.Type ASB1 and ASB2 can be supplied in brass.Consult Dulmison for further details.
Note: Hardware can be supplied upon request.Standard aluminium bolt 40mm x M12 with nut and flat washer. Add -2 to part number eg. ASB1-2Standard stainless steel bolt 40mm x M12 with nut and spring washer. Add -1 to part numbereg. ASB1-1
Aluminium Service BlocksType ASB (Reg. design No. S8326)
ASB1ASB2ASB3
1 x M122 x M123 x M12
4090140
505050
121212
2 x 8mm2 x 8mm2 x 8mm
Heightmm
Thicknessmm
Number & Size ofService Cable Holes
ClampingBolt Size
LengthmmCat No.
Underground Residential Distribution (URD)
www.dulmison.com.au 16-17
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Designed for 400 amp. continuous current and formatching link palms spaced at 82.5mm centres.
This is an insulated handle for screwing onto the threaded stud of Type WL400 Wedge Link.Insulated rubber gloves are recommended as an added safeguard. Each handle is electronicallytested to 1,000 volts rating prior to supply.
Wedge LinkType WL400
Wedge Link Operating HandleType UELOH1
Underground Residential Distribution (URD)
www.dulmison.com.au16-18
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
These shrouds slip over the cable terminations to prevent accidentalcontact with live parts and are held in place with plastic wire ties (notsupplied). Their pliability permits elongated distortion to accommodatemulti-cable installations.Material: Fire retardant PVCColour: Black
LV Termination ShroudsTypes SHDL; SHDS
SHDL90SHDS66
9066
8462
15090
L mmO.D. mm I.D. mmCat No.
Underground Residential Distribution (URD)
www.dulmison.com.au 16-19
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Type CG Cable Glands are made from high strength copper alloywith a smooth finish for easy wiping. Lower section of gland may becut to suit larger cables.
Cable GlandType CG (Similar to BS2562)
Cast in copper alloy and supplied with galvanised steel bolts, nutsand spring washers. Suitable for fixing cable armour to outside ofType CG cable gland.
Cable Gland Armour ClampsType CGAC
CG2 25 to 83 mm 156.00 92.00 89.00 24.00 124.00 114.30 95.30 85.70 14.00 14.00
Dia. over metalsheath of cable
Dimensions in mmCat No. A B C D E F G H J L
CGAC2 CG2 172.00 146.00 103.00
MatchingCable Gland
Dimensions in mmCat No. X Y Z
D
X
Y
Holes 11mm dia
13mm
13mm
26mm
Z dia
B
R3 L rad
4 holes J dia
A E
G
F H
3mm9mm
C dia
Underground Residential Distribution (URD)
www.dulmison.com.au16-20
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Cable ClampsType CAB
CAB5420CAB5427CAB5429CAB5435CAB5437CAB5440CAB5441CAB5442CAB5444CAB5446CAB5448CAB5449CAB5452CAB5454CAB5456CAB5459CAB5466CAB5472CAB5476CAB5478CAB5482
19 - 2025 - 2727 - 29
33.5 - 3535 - 3738 - 4039 - 41
40.5 - 42.542 - 44
44.5 - 46.546 - 4848 - 5050 - 5252 - 5454 - 56
56.5 - 5963.5 - 6666 - 7274 - 7676 - 7880 - 82
65657086899898102104108114115120126127130151165172192196
738080767987879496102106108112116120121146160170165178
17.52020303235353535383941424244455052545566
373838383841414141454545454546484860626064
55555
6.56.56.56.56.56.56.56.56.56.56.56.56.56.51010
6367708995104104111104111118127130131135137165158165170204
---
1012121212121212121212121616---
16
88881010101010101010101010101012121212
738690104111118121124126128132137142148150152178195202225228
Cable ODmm
Clamp Dimensions in mmCat No. A B C E G H J K Bolt Dia W
W
E
A
GH
C
Fixing bolt - OJ
BFRONT VIEW SIDE VIEW
BOTTOM VIEW
Three Way (Trefoil)2 Bolt ClampsHigh strength cast aluminium.20kN bursting strength.
Underground Residential Distribution (URD)
www.dulmison.com.au 16-21
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Cable ClampsType CAB (Cont’d)
Single Way Single Bolt ClampsA self aligning, interlocking, non-magnetic clamp. Fits standard channels.
CAB5125CAB5130CAB5135CAB5141CAB5147CAB5154
192429344046
253035414754
313641485461
414651586471
101010101010
Cable Dia. D mm Dimensions in mmCat No. Min Max H W Bolt Dia.
CAB5960CAB5967CAB5974CAB5981
CAB59105NI
55-6060-6767-7474-81
101-105
72798895124
73808996120
4545505065
96105112121154
Cable Dia. Dimensions in mmCat No. mm H C T W
Single Way 2 Bolt ClampsFor larger diameter cables. Non magnetic. For flat or channel mounting.
D
W
H
C
T
11mm dia
W
H
(Bolt not supplied)
Underground Residential Distribution (URD)
www.dulmison.com.au16-22
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Dulmison consumer connection pits are made of high strength HDPE and polypropylene plasticexhibits excellent weather and chemical stability for long installation life. Design embodies specialribbing for on site strength and stability. Pits are extendable. Pit lids are available in concrete andgalvanised steel checkerplate.
Pit Nomenclature
Character Representation
Consumer Connection Pits
P I T 1 L C L C B
Standard Pits
1), 2), 3) Undergroundpit or accessory
stndard prefix
4) Size
5) Lid or Riser
6) Lid material
7) Lid security
8) Lid marking
9) Plastic Lid colour orSteel Lid large ‘1’ piece
Applicable for Lids Only
1)2)3)4)5)
6)
7)
8)
9)
or
PITRefer tableAccessory:
Lid material:
Lid security:
Lid marking:
Lid colour:(for plastic only)
Lid Size:(for steel only)
L = Lid
R = Riser
C = ConcreteP = PlasticS = Steel
L = LockableT = Tamper Proof (Standard)
C = CommunicationE = ElectricalU = (unmarked)
B = Black
1 = Non-preferred one piecelid for larger size pits
Applicable for Lidpart numbers only
Underground Residential Distribution (URD)
www.dulmison.com.au 16-23
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Consumer Connection Pits
PitLid
PIT1PIT1LCT(E/C/U)PIT1LST(E/C/U)
ConcreteSteel
419 x 155 x 3501 lid per pit1 lid per pit
3.008.004.80
Riser for PIT1 is PIT1, height increase from 100mm to 200mm
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT2PIT2LCT(E/C/U)PIT2LST(E/C/U)
ConcreteSteel
553 x 180 x 5141 lid per pit1 lid per pit
6.0016.007.70
Riser for PIT2 is PIT2, height increase from 100mm to 325mm
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT3PIT3LCT(E/C/U)PIT3LST(E/C/U)
ConcreteSteel
663 x 243 x 5701 lid per pit1 lid per pit
8.2025.0013.10
Riser for PIT3 is PIT3, height increase from 100mm to 325mm
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT4PIT4LCT(E/C/U)PIT4LST(E/C/U)
ConcreteSteel
584 x 281 x 7601 lid per pit1 lid per pit
9.5027.0014.40
Riser for PIT4 is PIT4, height increase from 100mm to 400mm
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT5PIT5S
PIT5LCT(E/C/U)PIT5LCL(E/C)
PIT5LST(E/C/U)PIT5LSL(C/U)
SplitConcreteConcrete
SteelSteel
580 x 330 x 5801 lid per pit1 lid per pit1 lid per pit1 lid per pit1 lid per pit
12.00
30.0030.0016.2016.70
Riser for PIT5 is PIT5R , height increase is 200mm to 450mmRiser for PIT5S is PIT5S, height increase is 150mm to 370mm
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
Underground Residential Distribution (URD)
www.dulmison.com.au16-24
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Consumer Connection Pits
PitLid
PIT6PIT6LCT(E/C/U)
PIT6LCLCPIT6LST(E/C/U)PIT6LST(E/C/U)1
PIT6LSL(C/U)PIT6LSL(C/U)1
ConcreteConcrete
SteelSteelSteelSteel
1240 x 440 x 6142 lids per pit1 lid per pit2 lids per pit1 lid per pit2 lids per pit1 lid per pit
26.0038.0038.0019.7038.8020.2039.40
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT7PIT7LCT(E/C/U)PIT7LST(E/U)
PIT7LST(E/C/U)1PIT7LSLU
PIT7LSL(C/U)1
ConcreteSteelSteelSteelSteel
910 x 440 x 10752 lids per pit2 lids per pit1 lid per pit2 lids per pit1 lid per pit
26.0038.0015.2028.5015.8029.10
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT8PIT6LCT(E/C/U)
PIT6LCLCPIT6LST(E/C/U)PIT6LST(E/C/U)1
PIT6LSL(C/U)PIT6LSL(C/U)1
ConcreteConcrete
SteelSteelSteelSteel
1240 x 440 x 8342 lids per pit2 lids per pit1 lid per pit1 lid per pit2 lids per pit1 lid per pit
29.0038.0038.0019.7038.8020.2039.40
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
Cat. PIT-TBAR Cat. PIT7TBAR
Riser for PIT7 is PIT7, height increase 370mmFor concrete lids PIT7TBAR is required
Riser for PIT6 is PIT6, height increase 332mm or PIT 8, height increase 440mmFor concrete lids PIT-TBAR is required
Riser for PIT8 is PIT8, height increase 440mm or PIT 6, height increase 332mmFor concrete lids PIT-TBAR is required
Underground Residential Distribution (URD)
www.dulmison.com.au 16-25
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Series 450Designed for commercial or domesticapplications and trafficable areas, these heavyduty polypropylene pits are strong, durable andeasy to install. The Series 450 pits are alsoavailable with riser units for 295mm depthincreases. Ideal as an electrical orcommunications cable jointing pit.
Covers: Available to Australian Standard AS3996 Class A (Light Duty) and Class B (Heavy Duty)in concrete or galvanised steel checkerplate.
Installation: When being used in trafficable areas, the Series 450 and Series 600 pits must beinstalled with a concrete collar to fully support the top of the pit. This collar should beapproximately 150 x 150mm around the top perimeter.
Series 600This large capacity heavy dutypolypropylene pit is ideal for trafficablecommercial projects. Optional risers areavailable for 300mm depth increases. Series600 pits are well suited for large electrical orcommunication cable jointing where large radiiare involved.
Heavy Duty PitsFor larger cable requirements
PitLid
PIT450PIT450LCTUPIT450LSTU
PIT450R
ConcreteSteel
450 x 450 x 4501 lid per pit1 lid per pit
Height increase of 295mm
8.00
13.00
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PitLid
PIT600PIT600LCT(E/C/U)
PIT600LSTUPIT600R
ConcreteSteel
600 x 600 x 6001 lid per pit1 lid per pit
Height increase of 300mm
14.3060.0019.00
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
PIT600
PIT600R
Underground Residential Distribution (URD)
www.dulmison.com.au16-26
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Designed with wide side wall ribbing for highstrength, the Dulmison service pit is made fromlinear, medium density polyethylene and exhibitsexcellent weather and chemical stability. Pit lids areavailable in concrete or glass filled nylon.
Lid Lifting Hook for concrete pit lids with lifting boreCat No. LIDLIFTERHK
Lid Lifter for concrete pit lids with elongated holeCat No. LIDLIFTER
Lid Lifter for plastic pit lidsCat No. PLLIFTER
Service Pit and Lid
Pit Accessories
PitLid
PIT300DPIT300DLCT(E/C/U)PIT300DLPT(E/C/U)*
ConcretePlastic
320 x 530390 Dia390 Dia
4.5018.61.5
Material(Type)
Weight(kg)
Overall DimPits - inside dims
Lids - Per Pit
Plastic Pit Lid Features• Tamper proof - latched• Surface is non-slip• Made from UV resistant material• 3 tonne load carrying capability• Lightweight - 1/12 that of concrete equipment• Able to be retrofitted into existing pits
Underground Residential Distribution (URD)
www.dulmison.com.au 16-27
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
These fully waterproof, insulated connectors aresuitable for installation in a pit and enableunderground services to be connected quicklyand safely by one person using a ratchetspanner.
The connectors have been rigorously testedand avoid the need for stripping, compressiontooling or heat shrinking.
••••
•
••••
Terminals incorporate insulation piercing technologySimple, quick, fail safe three step installationTerminals accept a wide range of cables from 6-50mm2
The K199 terminal has 2 cable entry points to suit phase connections and 100AMP fusecapacity with a 22 x 58 barrel typeThe tapered flexible cable seal enables the connector to remain waterproof, even whencables are not in straight alignment with the connectorTerminals suit XLPE and PVC insulated single core and multi-core cablesReusable - up to three times with copper cableConnector is able to be separated with the fuse remaining in the dead sidePlug provided to cap live side after connector is separated
Insulation Piercing Connectors - FusedType IPC
K199
Tightening shear head breaks
Location for 22 x 58 fusecartridge, neutral tube ormini-switch
Spring tightening
* Length in mm
Sealingring
Sealing cap
120
85
Underground Residential Distribution (URD)
www.dulmison.com.au16-28
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
GelPort submersible secondary connectors utilise the sealingproperties of PowerGel sealant technology to completelyencapsulate and protect cable connections, even under water.Versatile and easy to install, the GelPort connector features noloose parts, no boots to trim, and no maintenance. This innovativeproduct is available in 3, 4, 5, 6, and 8 port configurations, and issuitable for use on 4-150mm cables carrying up to 600V. GelPortsecondary connectors dramatically reduce corrosion issues,resulting in longer service life and greater customer satisfaction.
To install GelPorts strip the cable and push it into thegel-filled cable port. The cable is encapsulated in geland instantly sealed. It's that simple.
Pit Connectors - GelPortSubmersible Secondary Connectors for URD Distribution
Cat No.
GPRT-350-3PGPRT-350-4PGPRT-350-5PGPRT-350-6PGPRT-350-8P
34568
4-1504-1504-1504-1504-150
117149180212276
9797979797
8989898989
Number ofWire Ports Length Width Height
ConductorUse Range
mm2
Proven tough hinge design
Tin plated aluminium connector
Gel sealed cable entry port
Gel sealed screw port cap
Proven robust latch design
Tough, puncture resistant,high impact strengthpolypropylene body and cap
InsulationInsulationpierpiercing vercing versionsion
coming soon!coming soon!
Underground Residential Distribution (URD)
www.dulmison.com.au 16-29
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Protect your underground services with marking tapes fromDulmison. ELECTAPE is 100% Australian made, manufactured andtested to comply with AS2468.1-1995. It is marked CAUTIONBURIED ELECTRIC CABLE BELOW and comes in a roll of 350m.
ELECTAPE conforms to all aspects of AS2648.1-1995 for:
• Material• Width 150mm• Colour (orange)• Chemical Resistance
Other underground tapes are also available.
Marking TapesType ELECTAPE
• Elongation• Tear Resistance• Impact Resistance• Marking
Underground Residential Distribution (URD)
www.dulmison.com.au16-30
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Construction: Tubular galvanised steel frame; aluminium supportsroller; stainless steel axle. Tubular frame members prevent unitsinking under load. Unit may be used as corner roller by turning onits side and staking through tubular members for stability.Roller has a 152mm diameter.
Cable Support RollersType CSR
LengthCat No.381CSR3
Width Height Roller235 244 152 Dia.
Principle Dimensions mm
Underground Residential Distribution (URD)
www.dulmison.com.au 16-31
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Joints are designed for use with 4 core sector shaped polymeric mains cables, together with 4 or5 core polymeric Branch cables. Joints are available with one of 2 encapsulation shell types asfollows:
• Impact Resistant Polycarbonate - Type BAVSupplied as two clip together halves
• Impact Resistant Polypropylene - Type MMSupplied in Hinged form
All Kits are supplied complete with all necessary jointing materials, including foam seals, fillers,appropriate connectors, safety gloves and instructions.
Two types of filler material are available, and can be supplied in mixing satchels, or in tins.(Satchels being standard) Shelf life of both fillers is 2 years. Full technical details and MSDS datais available for each product.
• GUROFLEX - A Patented, ISOCYANATE free,environmentally friendly, 2 component cold castingcompound. It is qualified to CENELEC HD623,and can be used on XLPE. PVC, PE or Paperinsulated cables. Colour - Green.
• RAPID 3010 - This is a conventional two partHydrophobic Polyurethane resin. It is qualified toCENELEC HD623, and can be used on XLPE, PVCor PE insulated cables - Colour - Blue.
Low Voltage - Mains to Service - Branch Joints
Underground Residential Distribution (URD)
www.dulmison.com.au16-32
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Three types of connectors are available, within each kit. The mains to branch ring styleconnectors, incorporate insulation piercing technology to make the mains connection. Allconnectors are range taking. Mantle connectors are of the screw type, and can be supplied withinsulating shrouds.
• HELLSTERN - Two Piece design - top and bottomTightening screws on each side, all mains connectionsmade simultaneously, and all screws tightened fromthe top of the joint.
• HINGED - Ring DesignIs clipped into position over mains cores. Each coreConnection can be carried out individually.
• MANTLE - Screwed DesignNickel plated screw connector, available withInsulating Shrouds.
Low Voltage - Mains to Service - Branch Joints (Cont’d)
Full Joint Kits
Cat No.
Mains Cable Range- No. of cores -
mm2
ServiceCableRange
ResinType
ConnectorType
ConnectorCat No.
BAV-2-GD-MC25BAV-2-GD-MC25
MM-5-GD-AU01MM-5-3C-AU01MM-5-GD-AU02MM-5-3C-AU02
MM-7-GD-AU01MM-7-3C-AU01MM-7-GD-AU02MM-7-3C-AU02
5 x 10 - 255 x 10 - 25
4 x 120 - 240*4 x 120 - 240*4 x 185 - 240*4 x 185 - 240*
4 x 240**4 x 240**
4 x 185 - 240*4 x 185 - 240*
5 x 10 - 255 x 10 - 25
4 x 6 - 704 x 6 - 704 x 6 - 704 x 6 - 70
4 x 6 - 704 x 6 - 704 x 6 - 704 x 6 - 70
GUROFLEXRAPID3010
GUROFLEXRAPID3010GUROFLEXRAPID3010
GUROFLEXRAPID3010GUROFLEXRAPID3010
MantleMantle
HingedHinged
HellsternHellstern
HellsternHellsternHellsternHellstern
GURO-MC25-IGURO-MC25-I
JOR05373JOR05373HEL-6879HEL-6879
HEL-6880HEL-6880HEL-6879HEL-6879
* Can only be used on 240 Solid Sector cable** Can only be used on 240 Stranded Sector cableNote: MM-7 has a larger case than the MM-5 for greater clearance.
Underground Residential Distribution (URD)
www.dulmison.com.au 16-33
Und
erg
roun
d R
esid
entia
l Dis
trib
utio
n ( U
RD
)
Mains cable over sheath removal tool - Cat No. UNI25• Ratchet Design• Suitable for cables over 25mm in diameter• Strips circumferentially as well as longitudinally
Mains cable over sheath removal tool - Cat No. JOR-20300• Fully Insulated Handle - rated at 1000V• Non flammable thermoplastic material• Suitable for cables over 20mm in Diameter• Comes with protective cove for blade
Insulated Hex Drive - Cat No. #TBOX5MM & #TBOX8MM• Fully Insulated and rated handle - 1000V• 5mm and 8mm Hex sizes
Core separation Tool - Cat No. IBSW1• Unique Hinged design, for controlled separation• Nylon wedges, eliminates damage to cores.
Core Separation Tool - Cat No. JOR-20400• Impact Resistant Thermoplastic• Can be used on energised 1000 volt cables• Designed to be driven to separate cores
LV Jointing Tools