Upload
anil-kumar-tufchi
View
419
Download
0
Embed Size (px)
Citation preview
www.integrogroup.in
I tegro’s Co fort Floor-a
feel of luxury
An Intelligent underfloor
heating
Underfloor heating & Specialized Heating Solution
INDEX:
Typical Layout
Why floor heating?
Benefits
Advantages
Under carpet heating mat
Mirror heating pad
Towel Warmer
Hot water systems
Freeze Protection
Graph
International Approvals
Typical layout
Integro’s Comfort Floor— a feel of luxury
An intelligent underfloor heating by Integro
Why floor heating?
With traditional central heating, air heated by the radiators rises. The result is that the
hottest part of the room is the ceiling and the coldest is the floor, where the heat is actually
needed. This is both very inefficient and wasteful but also uncomfortable to the body. Warm
head and cold feet syndrome resulting from the heat in upper layer.
Conversely heated floors produce a much more comfortable environment with even heat
distribution throughout the room
Benefits from floor heating include
• No more cold feet! more comfortable warmth
• Uniform heat, where it is needed, distributed across the whole floor
• Lower temperature set-point = greater energy efficiency
• Invisible heat - no unsightly radiators
• No high temperature surfaces - safer, particularly for older people
• Gentle air circulation reduces airborne dust - a must for allergy/asthma sufferers
• Dry floors eliminate fungi growth
• Easier to keep clean
Warm head, cold feet syndrome resulting from heat in upper layers Convection carries heat up walls to the ceiling, missing the room interior and low levels Water needs to be hotter in conventional radiator systems than in hydronic UFH
Comfortable temperature throughout the room space. Uniform ,gradual heat distribution across entire floor area. Effective electric or hydronic heating elements are embedded in cementitious screed with excellent thermal conduction properties
I tegro’s intelligent underfloor heating system is suitable
•For almost all floor coatings (tiles, wood, laminates, plastic)
•For both dry rooms and wet rooms.
•Can be laid on any floor (plastic, concrete, wood)
• Heating cables based on Self regulating Technology.
A self- regulating floor heating solution automatically adjusts its power and heat output in
accordance with the temperature of the floor. For cold floors, more heat is produced and
in warmer areas, less heat is produced.
This variation in heat and power output is independent of the control system.
The control systems can be used for further saving of energy with highly efficient control
system.
DRY AREA WET AREA
Advantages
•Avoids overheating.
●The cable can be closely spaced.
● Maintenance-free.
•Cannot burnout or overheat , intelligent cable which responds to any part
becoming hot by reducing the heat produced at that point. It is effectively self-
controlled at every point along its length to prevent overheating.
•Cut to length, Can be cut to the exact length needed.
•New build or retrofit ,can be fitted in new buildings or retrofitted over existing
floors.
•Self-regulating Responds to localised additional heat losses which makes it An
Intelligent Heating system-----The right amount of heat when and where needed
Under Carpet Heating
Mat Add extra war th a d co fort to carpet with I tregro’s carpet heating mat. The mat is non-adhesive mat
installed under carpet to provide warmth. Gradual
warming of delicate carpet with energy efficiency at
12W/sq. ft. Standard Sizes Available.
Get the steam free mirror in minutes. Self-adhesive backing for easy installation to back of
mirror. Avoids condensation. Mirror Heat pads are taped to the back of the mirror before
hanging. Mirror Heat is connected directly to a standard power outlet.
Mirror Heating Pad
I tegro’s Towel war ers are manufactured using quality metals.
Thermostatically controlled and
designed to fit any budget, our electric
operated Towel Warmers are a key to
any bathroom and energy efficient.
MOC: SS304, Self-regulating type,
burnout proof heating cable used,
wattage 250 W.
Towel Warmer
Energy Efficient Hot Water Temperature Maintenance System
Modern living dictates that buildings shall have hot water available whenever and
wherever needed - and preferably instantaneously. Hot water is normally provided by a
boiler in a centralized or localized heating system.
After draw off of hot water at a supply point, the pipe feeding that supply point remains full
of hot water which, under static conditions, cools to ambient conditions.
When demand resumes, there is a delay period whilst the now cold water is replaced by
water heated from the boiler. The delay is both frustrating and costly, as the volume of the
static head of water must effectively be heated each time a tap or valve is opened.
Driveway , Roof Snow Melting
Snowy winters can be a pain, especially when you have to shovel and salt your driveway,
walkway and stairs. We offer a selection of Snow Melting systems that heat driveways and all
concrete or pavement around your home, as well as roof and gutter de-icing solutions and
portable snow and ice-melting systems.
Installing our heavy duty heating cable will give you peace of mind in knowing that your roof
will be secure and unharmed by even the harshest winter storms. You can stay comfortable
inside and let the pavement do the work for you.
Frost Protection of Taps & Freeze Protection of Fire Suppression systems
with Electric Heat-tracing
Heat Tracing Systems are suitable for Protection of Fire Sprinkler Piping against
Freezing.
Where above ground water-filled supply pipes, risers, system risers, or feed mains
passing through open areas, cold rooms, passageways or other areas exposed to
sub- zero temperatures , the pipe is protected against freezing by heat tracing and
insulating covering.
OUTPUT VS TEMPERATURE
International Approvals